21SV23099_6ft Animated Singing Santa

1/3

B B

PARTS LIST

A. Base x 1

B. Lower Support Pole x 2

C. Boot x 2

D. Pants x 1

E. Lower Torso Frame x 1

F. Hip Hoop x 1

G. Torso Frame and Body x 1

H. Costume and Arms x 1

I. Head x 1

J. Adapter x 1

Input: 100-240VAC 50/60Hz

Output: 5.9V 2.0A

1.1 1.2 2.1 2.2

FRONT

BACK

RIGHT

LEFT

NOTE: Throughout the instructions, Right

and Left are relative to the character.

IF ANY PART IS MISSING OR BROKEN, DO NOT ATTEMPT TO ASSEMBLE THE PRODUCT AND CONTACT SVI CUSTOMER SERVICE FROM 8:30AM TO 5:30PM PST

AT 1-855-428-3921, EMAIL CUSTOMERSERVICE@SVIUS.COM, OR CALL THE HOME DEPOT CUSTOMER CARE AT 1-855-HDHOLIDAY (1-855-434-6543).

EASY ASSEMBLY AND OPERATION INSTRUCTIONS

21SV23099_6ft Animated Singing Santa

READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

Means It's

Locked

Click

Locking Pin

USA/ États-Unis/ YOW 1006215462

Scan

for easy

3D instructions

Before you begin

IR SENSOR

IMPORTANT TIPS:

• Ensure that the item's adapter is plugged in at the function control box and in the

wall.

• Ensure that the switch on the function control box is on the desired setting.

• If not functioning properly (ex: mouth doesn't move, body doesn't move), ensure

that cables are connected to their corresponding cable as shown in the instruction

sheet.

• Be sure nothing is blocking movement or caught in moving parts.

• Ensure that the floor or surface that the item sits on is flat and level.

• Ensure that the volume is not all the way down.

• Be sure nothing is blocking the sensor.

• If the item still does not work, contact SVI Customer Service from 8:30am to

5:30pm PST at 1-855-428-3921, email customerservice@svius.com, or call

Home Depot Customer Care at 1-855-HDHoliday (1-855-434-6543).

2/3

3.23.1

5.1 6.46.3

6.26.1

4.24.1

Cable pairs are

color-coded to

ensure proper

color-matching

connections.

Plug the adapter

into the function

control box.

ADAPTER

NOTE: Locate the sensor cable from within

the costume and thread the cable into the

hole available in the front of the torso

frame.

3/3

YOUR 6FT ANIMATED SINGING SANTA IS NOW FULLY

ASSEMBLED. PLUG IN AND TURN ON TO LET THE FUN

BEGIN!

OPERATION INSTRUCTIONS:

1. Plug the power adapter into a standard power outlet and adjust the settings on the function control

box, located on the torso frame, as desired.

2. Settings:

WARNING

This item is not a toy and should be used for decoration only. This item contains small parts that can

be a choking hazard. Keep all plastic and wire parts away from children.

1. Please use the adapter supplied by manufacturer.

2. Please assemble item according to instructions. Connect all wires according to matching color.

3. Children should be supervised by adults. Item should not be grabbed, as it becomes a tipping

hazard. Keep flammables away from the adapter, as it heats up during operation.

Please view all instructions carefully before assembling. Save this instruction sheet for future

reference.

CARE AND STORAGE INSTRUCTIONS

For best performance operate your item indoors. When not in use, store this product in its original

packing. Keep away from heat and moisture.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

CAUTION:

Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec-

tion against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is encour-

aged to try to correct the interference by one or more of the following measures: Reorient or relocate

the receiving antenna, Increase the separation between the equipment and receiver. Connect the

equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the

dealer or experienced radio/TV technician for help.

CAN ICES-3(B)/NMB-3(B)

Sensor / Détecteur

5.9 V

Try Me / Essaie-moi / Pruébame

Sensor / Détecteur

Sensor /Détecteur

This switch mode will activate sound and animation when the Infra-red (IR)

sensor is activated and will operate for 1 audio-cycle with each activation. The

Infra-red (IR) sensor has a range of up to 2 m/6.5 ft. and will activate when

someone comes within an 80-degree angle from left-to-right, as well as from

above and below.

This switch mode allows the item to be activated only if triggered by using a Step

Here Try Me Activation Pad (Not Included). The item will operate for one audio

cycle with each Try Me activation. Otherwise, the item will stay off.

This switch mode will continuously operate the sound and animation of the item.

Raise or lower the volume using the volume control turn dial, turn all the way

down to turn the volume off .

Emeryville, CA 94608

Tel: 855-428-3921

MADE IN CHINA

IR SENSOR

Be sure nothing is

blocking the sensor.