.
Cozy N Safe
Oxford Street, Wolverhampton,
West Midlands, WV14 7DP, UK
Tel: +44 (0) 1902 494905
Email: [email protected]
CHILD INFORMATION
(KEEP WITH CAR SEAT AT ALL TIMES IN CASE OF EMERGENCY)
NAME:
.......................................................................................................
DATE OF BIRTH (DD/MM/YYYY):
.......................................................................................................
ADDRESS:
.......................................................................................................
.......................................................................................................
.......................................................................................................
ALLERGIES/MEDICAL CONDITIONS:
.......................................................................................................
.......................................................................................................
........................................................................................................
EMERGENCY CONTACT 2:
NAME:
....................................................................................................
PHONE NUMBER:
....................................................................................................
EMERGENCY CONTACT 2:
NAME:
....................................................................................................
PHONE NUMBER:
....................................................................................................
www.cozynsafe.com
INSTRUCTION FOR USE
Congratulations on your purchase of the child seat.Please read this instruction
manual carefully before use.If you have any questions concerning the use of this
child seat,please do not hesitate to contact us.
CHILD RESTRAINT EST226
SUITABLE FOR CHILDREN
9 months to 12 years old
9~36KG
GROUP ,II I,III
1
1.Vital information-READ NOW................................................................4-5
2.Safety instruction..................................................................................6
3.Using safety seat in this way....................................................................6
4.Parts and interior equipment..................................................................7
5.Scope of application f
or children.............................................................. 8
6 .Steps of backrest and base assembly......................................................9-10
7.Using the buckle....................................................................................10
8.How to place the safety seat in the vehicle ................................................. 11
9.
10.How to use thuides .................................................................12
11
. 9-25kg Installa�on with 5-point harness
11.1 Installing the safety (Installa�on 1)...................................13-16
11.2 Installing the safety (Installa�on 2) .................................17-21
11.3.Installing the safety ......................................................21-27
12.Installing the safety .......................................................... ...27-30
13.Unlock ...................................................................
...................30
14.Removing the cover...............................................................................31-34
15.Maintenance and cleaning
17.1 Daily maintenance.........................................................................34
17.2 Washing instruction.......................................................................34
16.List of approved cars................................................................
............35-38
group I
group I
group II
group II,III
Contents
2
GROUP METHOD OF INSTALLATION TYPE
I,II EZFIX +TOP TETHER UNIVERSAL
I, , II III
3-point safety belt TOP TETHER UNIVERSAL+ EZFIX + SEMI-
PRODUCT DESCRIPTION
, II III
Notice regarding Universal category (Group I II III)
1. This is a “Universal” child restraint. It is approved to Regulation No. 44, 04 series
of amendments, for general use in vehicles and it will fit most, but not all, car seats.
2. A correct fit is likely if the vehicle manufacturer has declared in the v
ehicle handbook
that the vehicle is capable of accepting a “Universal” child restraint for this age group.
3. This child restraint has been classified as “Universal” under more stringent conditions
than those which applied to earlier designs which do not carry this notice.
4. If in doubt, consult either the child restraint manufacturer or the retailer.
9-25KG
5-point harness
9-36KG
15-36KG
3-point safety belt UNIVERSAL
3-point safety belt+EZFIX SEMI-UNIVERSAL
3
1. Vital information-READ NOW
For your child’s safety, please read these instructions carefully before use and keep
them for future reference. Failure to follow the instructions contained in this manual
could result in serious injury to your child.
This child safety seat can only be used with the harness for children 9kg to 18kg
in weight (group I:9 - 18 kg ; group I, 15-36 kg).
This instruction manual must be kept in the allocated space on the car seat for its life
1.
2.
group II:15-25 kg ; I III:
Do not use this child safety seat at home. It has not been designed for home use
and should only be used in your car.
The child safety seat should be changed when it has been subject t
o violent stresses
in an accident.
Always make sure that any straps holding the seat restraint to the vehicle are
check that the straps are not twisted.
IMPORTANT! Ensure that any lap straps are worn low down, so that the pelvis is
Do not use any load bearing contact points other than those described in the
child restraint manufacturer.
Any luggage or other objects liable to cause injuries in the event of a collision
should be properly secured.
The rigid items and plastic parts of a child restraint must be so located and installed
that they are not liable,during everyday use of the vehicle to become trapped by a
moveable seat or in the door of a vehicle.
3.
4.
5.
6.
7.
8.
9.
10.
11.
Never leave your child unattended in the child restraint system even f
or a short time.
This child restraint should be securely belted in the vehicle even when not in use.
In a crash or sudden stop,an unsecured child safety seat may injure other occupants.
4
Notice regarding Semi-universal category (Group II III)
This child restraint is classified for "(Restricted/Semi-universal)" use and is suitable
for fixing into the seat positions of the following cars:
CAR FRONT REAR
Outer Centre
Yes Yes NO
Refer to
vehicle list
Seat positions in other cars may also be suitable to accept this child restraint. If in
doubt, consult either the child restraint manufacturer or the retailer.
Only suitable if the approved vehicles are fid with 3 point with retractor safety-belts,
approved to UN/ECE Regulation No. 16 or other equivalent standards.
Notice regarding Universal ISOFIX child restraint system (in Group I)
1. This is an ISOFIX CHILD RESTRAINT SYSTEM. It is approved to Regulation No. 44, 04
series of amendments for general use in vehicles fid with ISOFIX anchorages systems.
2. It will fit vehicles with positions approved as ISOFIX positions (as detailed in the
vehicle handbook), depending on the category of the child seat and of the fixture.
3. The mass group and the ISOFIX size class for which this device is intended
is: Group I, B1
period.
5
Your child should always be fastened in the car seat to prevent injury.12.
13.
14.
15.
16.
17.
18.
19.
20.Notice:
21.
22.
This child safety seat is designed for children from 9 to 36 kg. Never overload
the child safety seat with more than one child or with other loads.
The child restraint must not be used without the cover.
The seat cover should not be replaced with any other than the one recommended
by the manufacturer, because the cover constitutes an integral part of the restraint
performance.
Before you adjust any movable or adjustable parts of your child safety seat, you
must remove your baby from the chi
ld safety seat.
The child safety seat should be kept away from sunlight if the seat is not provided
Never use a second-hand product, as you can never be certain what has happened
to it.
Do not use in any configuration not shown in the instructions.
Please identify unsatisfactory position of the adult safety belt buckle relative to
the correct point of the child safety seat, if in doubt, please contact the child seat
manufacturer.
Please also read the car manufacturers handbo
ok before use.
Important! Before using the EZFIX child restraint system, please ensure you read
the manual or vehicle manufacturer handbook regarding the EZFIX / ISOFIX points.
23.
2. Safety instruction
Only suitable if the approved vehicles are fitted
with 3 point safety-belts,approved to U N/ ECE
Re gu lat ion No .16 or o th er equivalent
standards.
Forward facing traffic direction
Back
facing
traffic
direction Error
Vehicle
is
only
fitted
with
2-point
safety belt Error
Vehicle is fitted with 3-point safety belt Correct
Seat beside the driver Error
Rear seat Correct
Rear middle seats Three-point Belt Correct
Correct
3.1 Please carefully implement the Country Traffic Safety Regulations
● Do not install the child safety seat on the front seat with an airbag.
●
NOTICE
You can install in this position
Unable to install in this position
Do not install the child safaty seat
in the front seat with air bag.
Only with the three point
safety belt in this location.
DIAGONAL BELT
LAP BELT
3. Using safety seat in this way
NOTICE:If the buckle strap of car seat is too
long, the child restraint system can not be
installed firmly. It is very dangerous. If any
doubt, please consult the child restraint
system manufacturer.
6
7
Headrest
Chest pad
Head belt guide
group II,III
Comfortable cushion
Adjuster
(Under the cover)
Harness adjuster strap
EZFIX unlock button
Buckle
Harness
Safety belt route slot
Comfortable cushion
4.Parts and interior equipment
Safety belt routing label
Height adjuster
Look-off clip
Top tether
EZFIX connector
Adult belt route slots
Belt slot
Belt slot
Manual pocket
Harness connector
5. Scope of application for children
8
GROUP I
Suitable for children
9-18kgs, approximately
9 months - 4 years old.
Installa�on 1:
Securing the child:
5-point harness
Installa�on 2:
3-point safety belt
Securing the child:
5-point harness
GROUP II,III
Suitable for children
15-36kgs, approximately
4 - 12 years old.
Installa�on 1:
3-point safety belt+
Securing the child:
3-point safety belt
Installa�on 2:
3-point safety belt
Securing the child:
3-point safety belt
CLICK
top tether
CLICK
GROUP II
Suitable for children
15-25kgs, approximately
3 - 7 years old.
CLICK
Installa�on:
+3-point safety belt
Securing the child:
5-point harness
top tether
Step 2: Align the base and backrest in a
straight line.
Step 1: Slide the seat out of the box
Step 3: Place the backrest hooks inside
the base securely.
9
6. Steps of backrest and base assembly
A1
A2
A3
Slot alignment
Slot alignment
Step 4:Gently keep pressure on hooks
WARNING:DO NOT FORCE MAY CAUSE
DAMAGE.
①
②
③
Locking Method
Locking Method
you hear a“Click”.
Unlocking Method
7. Using the buckle
Unlocking Method
①
②
CLICK
A4
10
!
Note: In order to keep safe, please put the restraint system on the back seat,
and ensure that the backrest is places as close as possible to the car seat.
-Loosening the shoulder harness
Press the adjuster button under the cover
and at the same time pull both shoulder
straps forward.
Pull the adjuster strap until the harness
is fully tightened.
-Tightening the harness
9.Adjus�ng the harness
8.How to place the safety seat in the vehicle
11
B1
CLICK
10. How to use the Ezfix guides
B2
B3 B4
Step 1:
points in the car.
Step 2
Step 3:
12
In order to lock the Ezfix connector to the steel point successfully.
Please use the Ezfix guides.
11. 9-25kg Installa�on with 5-point harness
This is suitable for children weighing 9 - 18kg, approximately
9 months to 4 years old.
Step 2:
in the car.
Step 1:
B1
a1. Install the baby car seat
C2
C1
CLICK
PUSH
C3
13
Installa�on:
Securing the child: 5-point harness
Step 3: Push the child seat in the
Step 4:
turns to green and make sure child
seat is firmly connected(C4).
C5
C6
Step 5: Locate the top tether and press the
the longest it can go (C5).
Step 6: Connect top tether with the
fixing point on the car(C6).
Fixed point 2
Fixed point 1
Fixed point 3
14
NOTICE:Child safety seat must be against
the car seat firmly.
PUSH
C4
11.1 Installing the safety group I (Installa�on 1)
NOTICE:
Please consult your vehicle
handbook as not all top tether points
are located in the same area. The
illustrated in C6.
C7
Step 7: Pull the belt of the top tether
until the adjuster shows green(C7).
Notice: Top tether is only for group I
and group II.
!
15
Step 1. Loosen the harness(C8)
Step 2:Release the buckle,and put the
child into the safety car seat(C9).
a2. Securing the child in the
safety car seat.
C8
C9
!
Step 4.Align the left and right buckle
tongues so that they form one tongue
a “Click”(C12).
RightToo high
Too low
Step 3:
(C10).
Pull the height adjuster to adjust
the height of the harness and the headrest
according to the childs height
The height for the harness is
adjusted by lifting the headrest
Note!
(C10).
C10
C11
16
Step 5:Pull the shoulder straps upwards to
remove the slack from the lap sections of
the harness then pull the adjuster strap
until the harness is fully tightened(C12).
C12
CLICK
17
11.2 Installing in safety group I (Installa�on 2)
Step 1:
This is suitable for children of weight 9-18kg, 9 months - 4 years
approximately.
b1. Install the baby car seat
PUSH
Step 3:Pull out the diagonal belt together
with lap belt and pass them through the
belt route slot of backrest(D3).
D3
D1
D2
Step 2:Put the Child safety seat against the car
seat(D2)
Instala�on: 3-point safety belt
Securing the child: 5-point harness
Step 4:Insert the belt into the buckle and
you will hear an audible "Click" (D4).
Step 5:
Clip the diagonal belt into
the locking clip.(D5,D6,D7) .
18
CLICK
D5
D4
! Note!Please refer to the following
picture, to ensure to clip the safety belt
into the locking clip in the correct way.
(D6,D7).
D6
booster seat (D1).
19
Step 6:Pull the car seat belt following the
D8
D7
Step 1. Loosen the harness(D9)
b2. Securing the child in the
safety car seat.
D9
20
!
Step 3:
(D11).
Pull the height adjuster to adjust
the height of the harness and the headrest
according to the childs height
The height for the harness is
adjusted by lifting the headrest
Note!
(D12).
D11
D10
Step 2:Release the buckle,and put the
child into the safety car seat(D10).
RightTo o high
Too low
D12
Step 4.Align the left and right buckle
tongues to one tongue and insert into
the buckle until you hear a “Click”(D13).
Step 5:Pull the shoulder straps upwards to
remove the slack from the lap sections of
the harness then pull the adjuster strap
until the harness is fully tightened(D13).
D13
CLICK
11.3. Installing in safety group II
This is suitable for children of weight
15-25kg, 3-7 years approximately.
Step 2:
in the vehicle.
Step 1: Press both button and push out
c1. Install the baby car seat
E2
E1
Installa�on: Ezfix+top tether
+3-point safety belt
Securing the child: 5-point harness
21
E3
CLICK
PUSH
Step 3: Push child seat following the
connectors are completely locked with the
Step 4:
system turns to green and make sure child
E5
Step 5: Press the adjusting button
and adjust the belt of top tether to the
longest(E5).
NOTICE:
against the vehicle seat.
PUSH
E4
22
Step 6: Connect top tether with
Fixed point 2
Fixed point 1
E6
Fixed point 3
E7
Step 7:
Pull the belt of top tether
until the adjuster shows green(E7).
Notice: Top tether is only for
group I and group II.
!
E8
Step 8:Pull out the diagonal belt
together with lap belt and pass them
through the belt route slot of backrest
(E8).
23
Step 9:Insert the belt into the buckle and
you will hear an audible "Click" (E9).
Step 10:
Clip the diagonal belt into
the locking clip.(E10,E11,E12) .
CLICK
E10
E9
! Note!Please refer to the following
picture, to ensure to clip the safety belt
into the locking clip in the correct way.
(E10, E11).
E11
24
No�ce: Please consult your vehicle
handbook as not all top tether points are
located in the same area. The most
25
Step 11:Pull the car seat belt following
E13
E12
Step 1: Loosen the harness(E14)
c2. Securing the child in the
safety car seat.
E14
E15
!
Step 3:
(E16).
Pull the height adjuster to adjust
the height of the harness and the headrest
according to the childs height
The height for the harness is
adjusted by lifting the headrest
Note!
(E17).
E16
Step 2:Release the buckle,and put the
child into the safety car seat(E15).
26
RightToo high
Too low
E17
12. Installing in safety group II, III
This is suitable for children of weight 15-36kg, 4-12 years approximately.
Group II,III installa�on can choose to use EZFIX or not.
1.Using EZFIX:
Connect EZFIX with anchorage
point on the vehicle seat(F1)
2.Not using EZFIX
Hide EZFIX in the booster. Put the
seat against the car seat(F2)
PUSH
CLICK
PUSH
F1
F2
Step 4.Align the left and right buckle
tongues to one tongue and insert into
the buckle until you hear a “Click”(E18).
Step 5:Pull the shoulder straps upwards to
remove the slack from the lap sections of
the harness then pull the adjuster strap
until the harness is fully tightened(E18).
E18
CLICK
27
28
Step 2:Follow the F5 routine to install the
child car seat.
When not using the child car seat,
ensure that it is kept in a safe place. When the
child car seat is in the car but not being used
Notice 4:
Securing the child
Step 1:Follow the part 14 (see
picture H1~H9)routine to remove
car seat pad.
A
C
B
F3
F5
NOTICE 3:No need to take off the top tether.
.Put the top tether in the bag(F4)
NOTICE 1:Fold the strap of both
sides and hide under the booster
cover
NOTICE 2:Place the buckle in the
booster(under the cover).
F4
29
Step 4:Use the height adjuster to adjust
the height of the headrest according to
the childs height.The gap between head
harness straps should be level with or just
above the childs shoulders
(F7,F8).
F7
Too high Right
Too low
F8
Step 3: Put the child in the seat and
follow F5 routine.
CLICK
F6
30
Step 5: Fasten car seat belt and make
sure, it is tight (F9).
Important:Ensure that any lap straps are worn
13. Unlock EZFIX
1
2
F9
Press the red button to release the
seat
31
Step 2:Release the buckle
Step 3:Slide both of the harness
straps off the harness connector.
14. Removing the cover
Step 1. Loosen the harness(H1)
①
②
H1
H2
H3
Step 4:Pull out the shoulder belt .
Step 5:
the slot under the safety
car seat.
Pull out the harness from
Step 6:
and accessories well in a safe place.
Keep the removed cushion
32
H4
H6
H5
Step 7:Place the buckle in the
booster(under the cover).
H7
33
Step 10:Turn the seat to the back and
unlock the snap fastener.
H10
H8
H9
Step 8:Fold the strap of both sides
and hide under the booster cover
Step 9:Put the top tether in the bag
15.1 Daily maintenance
1.Periodically check the child car seat on a daily basis. In the event of an accident the
child car seat should be replaced immediately.
2.
3.If the child seat becomes dusty,clean the seat belt and the plastic pieces by
swiping them with a damp sponge and allow them to dry naturally.
4.If food or drink are accidentally dropped into the buckle, disassemble the seat belt
from the child seat and rinse throughly with warm water. Leave it to dry naturally.
5.For cleaning the entire child seat fabric cover,please refer to the 15.2 washing
instructions.
15.2 Washing instruction
Never use any solvant,chemical detergent or lubricant on any part of your
child seat.
Hand wash,
water
temperature
below 30℃
Do not bleach
Dryclean,any
solvent except
trichloroethylene
Do not tumble dry
Do not iron
15. Maintenance and cleaning
Step 11:
cover (H11).
procedure to put on the put the fabric cover
back on
Fol
low in reverse order and repeat the
H11
34
