FIRE & SECURITY
PRODUCT GUIDE
Contents
Page 2 ..... Introduction
Page 3 ..... Contacts
Page 4 ..... Cable
Page 5 ..... Hold Up Devices
Page 6 ..... Sounders
Page 8 ..... Detection
Page 9 ..... Power Supplies
Page 10 ... CCTV
Page 11 ... Emergency
Page 11 ... Junction Boxes
Contact us:
Phone:
Tel: +44(0)151 6061000
Fax: +44(0)151 6061122
Address:
CQR Fire & Security, 125 Pasture Road,
Moreton, Wirral, CH46 4TH, UK
Online:
Web: www.cqr.co.uk Email: info@cqr.co.uk
2Y-LINK
FIRE & SECURITY
2
CQR Fire & Security
Who we are
CQR Fire and Security is a member of the OSL Group of companies. The OSL Group
is a manufacturing group with locations throughout the UK. OSL are committed to
excellence delivering top quality products and solutions, at the best price, on time. We
invest extensively in our systems and people to achieve this. Our development and
growth strategy is aimed at becoming the leader in all our markets, which will further
enable us to meet our customer’s most stringent demands. Established in 1978, CQR
Fire & Security has been at the forefront of the Fire and Security Industry for over 30
years. We are a 100% owned U.K. business operating from the Wirral, North West
England.
What we offer
We design and manufacture a comprehensive range of devices for the detection of
unlawful entry to buildings. These include first line detection products to protect against
forced entry through doors and windows, audible and visual devices to signal a forced
entry and devices to indicate duress or hold up emergency situation. We also offer a
large range of cable solutions designed specifically for the low voltage security market.
In addition, we offer a comprehensive range of Fire detection systems as part of our
range. These systems are designed to provide the earliest possible detection
of a fire within a building and to provide audible and visual warnings locally and remotely.
Route to Market
Our systems and products are designed for the protection of Domestic, Residential
and Commercial property. We reach the end user via a network of professional Security
Distributors both in the U.K. and overseas. Export is a large part of our business; we
have a broad reach Distribution channel covering the Europe, Africa, North America and
Asia Pacific and export to over 60 countries.
Quality and standards
It is CQR’S aim to provide its customers with products and services that exceed their
expectations in all respect of cost, performance, safety,
reliability and service. These goals are facilitated by our
quality system that satisfies the requirements of ISO 9001:
2008. We commit to constant monitoring of the effectiveness
of this Quality System. Agreed Quality Objectives ensure our
continual improvement culture. CQR’s products are designed
and manufactured to meet all of the latest European and
International Standards.
UK Sales Export Sales
Colin Rivett - UK Sales Director
Tel: 0151 606 9595 email: colinr@cqr.co.uk
Chris Ashworth - England (North) & Scotland
Tel: 07970 226610 email: chrisa@cqr.co.uk
Kabir Sanghra - England (East / S. East)
Tel: 07980 080326 email: kabirs@cqr.co.uk
Naomi Ball - UK -South West and Midlands
Tel: 07813 035952 email: naomib@cqr.co.uk
Andrew Jackson - Export Sales Manager
Tel: +44(0)151 606 1000 email: andyj@cqr.co.uk
Joshua Solari - International Sales Manager
Tel: +44(0)151 606 6305 email: joshuas@cqr.co.uk
James Williams - Export Sales
Tel: +44(0)151 606 6319 email: jamesw@cqr.co.uk
CQR - First Choice for Quality
CQR’s range of contacts are known throughout the security industry for their quality. The contacts
come with selectable resistors to allow installers to stock one contact that can be used with any
panel (see table below for supported panels). Many of the contacts have been independently
certified to meet EN50131 grade 2 and grade 3, so you can be confident in using them.
Multi EOL resistor technology allows the installer to stock one contact but service all the major
intruder systems. These include the following types A, B, D, E, I (see table below).
Grade 2 contacts are suitable for use in ungraded, grade 1 and grade 2 systems. These
contacts are required to have a mechanical tamper or be potted/sealed. End of Line (EOL)
resistors are an option but are not a requirement to meet grade 2.
Grade 3 contacts have all the features of grade 2 contacts and in addition must detect or
be immune to external magnetic interference.
Multi Contacts
Graded Contacts
Independently Certified
To give you total confidence many of the contacts are independently certified to
EN50131.
Type Resistor Guide Switch Tamper Type Resistor Guide Switch Tamper
A Honeywell, Microtech (Galaxy) 1K Ohms 1K Ohms F Bosch, DA Abacus 8K2 Ohms 3K9 Ohms
B Scantronic, Cooper, Pyronix PCX, Texecom,
Castle-Care Tec G3+
4K7 Ohms 2K2 Ohms G Castle Care-Tec 13K Ohms 1K Ohms
C Guardall (Network 1 configuration) Two wire only 8K2 Ohms 8K2 Ohms H Europlex, MDT 2K2 Ohms 2K2 Ohms
D DSC 5K6 Ohms 5K6 Ohms I Pyronix Matrix, GE / Aritech, HKC 4K7 Ohms 4K7 Ohms
E Gardtec 6K8 Ohms 4K7 Ohms J Texecom 22K Ohms 10K Ohms
Resistor Table Guide
SC517
Product Guide www.cqr.co.uk
• Flush Contacts
• Surface Contacts
• Heavy Duty Contacts
• Grade 1
•Grade 2
• Grade 3
Go to www.cqr.co.uk for a full
range of CQR and FIREBRAND products
MAGNETIC CONTACTS
Contacts are available as a single EOL. See table below
RS002/AB
SC570
The SC570 is CQR’s flagship contact. There are grade 2 and grade 3 versions available
both of which can incorporate CQR’s multi-resistor technology if required. White or brown
versions are held in stock and a double door option is available. Non-multi versions are
independently certified to EN50131.
SC517/MULTI
Smaller than most graded contacts, the SC517/MULTI is designed to look discrete in all
locations. The SC517/MULTI incorporates CQR’s multi-resistor technology and can also
accommodate additional end of line resistors or be configured as double pole. There are
grade 2 and grade 3 versions available both in white or brown.
FC508/MULTI
The FC508/MULTI is a 20mm flush contact incorporating CQR’s multi-resistor technology
and can also accommodate additional end of line resistors or be configured as double
pole. There are grade 2 and grade 3 versions available in white or brown.
RS002/AB & RS007/AB
The RS002/AB and RS007/AB are the market leading roller shutter contacts. Ruggedly
designed they incorporate CQR’s multi-resistor technology. The RS002/AB will meet all
your grade 2 needs, whilst the RS007/AB is specifically designed to meet the demands of
grade 3, with its unique shape to help locate the magnet.
FC508
SC570
Other resistor values are available
3
The majority of the cost of an intruder alarm system is in the installation rather than the
equipment so it is vital that the highest quality cable is used to ensure system integrity. All
CQR’s security cable is manufactured in the UK and is renowned for its superior quality.
A new range from CQR which has been designed, tested and manufactured in the UK for
domestic applications and is suitable for shorter cable runs. This cable is based on cores made
from 7 strands of 0.2mm copper clad aluminium wire and is sheathed in Type 1 PVC.
CCA Cable
Professional Cable
This UK manufactured cable has cores of 7 strands of 0.182mm annealed tinned
copper wire and is sheathed in Type 1 PVC. Suitable for any installation where
signal integrity is paramount.
Two different conductor types are used. A pair (red/blue) is provided in 16 strands x 0.2mm for
use where higher than normal current carrying capacity or lower voltage drop is required.
The data cores consist of standard 7 strands of 0.2mm tinned copper wire. The data cores are
aluminium foil wrap screened (with an earth drain wire) to give added protection against induced
transients that may be carried via the power cores or outside influences.
Power & Data
Each core consists of 24 strands of 0.2mm annealed tinned copper wire. Each pair of cores is
twisted and aluminium foil wrap screened. A bare 7 strands x 0.2mm earth drain wire is included.
Twisted pair cable is particular useful for installations requiring longer lengths of cabling such as
access control and CCTV.
Twisted Pairs
The standard security cable can also be specified with a special low smoke emission PVC outer
sheathing.
Low Smoke and Fume
This is similar to the standard cable except that each core is made up of 14 strands of 0.2mm
cable. This gives a Nominal conductor area of 0.44mm
2
. (This is often used in areas where
0.5mm” wire is required).
14 Strands
CQR manufactures a 2 and 4 core Fire Resistant
security cable. Fire resistant cable can be
specified on installations that have a risk of
fire spread for example multi-story buildings or
hospitals.
Fire Resistant
• 35 Years experience of
alarm cable manufacturing
in the United Kingdom
• Wide range of cable
types; standard, screened,
low smoke & fume, twisted
pair and power & data
• User friendly, easy to
strip & pliable in use
CABLE
4
LSZH cable should be used where safety, performance and concern for the environment are
important. LSZH cable is flexible, flame-retardant and resistant to oil and sunlight.
LSZH Cable
Product Guide www.cqr.co.uk
CQR offer the market leading range of hold up devices. From our best selling manual PADP2
range, to the brand new EPA-NG PD6662:2010 and BS8243 compliant electronic panic button.
The EPA-NG Range
The EPA-NG is the most advanced PA Button available on the market
today. Packed with innovative features, this electronic unit is a versatile
device capable of many functions. These are available in white, stainless
steel effect and brass effect Finishes.
Standard version includes:
• Single relay output
• Two button operation
• Instant operation
• LED Indicator
• Latching
• Selectable EOL settings
• Keyless reset
Plus version includes:
• 1st Activation output
• Confirmed activation output
• One or two button operation
• Timed delay operation
• LED indicator
• Latching or non latching
• Selectable EOL settings
• Keyless reset
Grade 3 Multi PA Range
The double push range of PA Buttons are all suitable for use in Grade 3
Installations. Inside the traditional double push design there are a selection of
end-of-line resistors for the convenience of the installer.
Available in white plastic, stainless steel and brass finishes.
• Latching
• Selectable for normally open / normally closed
• Indicator to show activation
• Tampered
• Built-in resistor values
• Suitable for use in grade 2 & 3 installations
• Spare keys available
Single Push PA
• Latching
• Selectable for normally open / normally closed
• Indicator to show activation
• 5 Terminal
• Spare keys available
• Available in white plastic and stainless steel
The Electronic Personal Attack button is a double push, flush fitting unit with
LED indication. This EPA will fit a single gang backbox.
• Key resettable
• LED indicator
• Suitable for use in grade 2 & 3 installations
• Tampered
• Spare keys available
EPA-STD
HOLD UP DEVICESCABLE
• Single Push
• Double Push
• Electronic
• Grade 1
• Grade 3
• PD6662: 2010 and
BS8243 Compliant
5
The Multibox is available in two versions; Standard - single piezo, grade
2 product, Plus - twin piezo, grade 3 product. There are a selection of
interchangeable covers available so the installer can offer their customer
a choice of styles. All covers and printing , excluding chromed, are free
of charge.*
The 3mm polycarbonate base unit has a 1.5mm inner cover to protect the
electronics and features both front and rear tampers. The Multibox has a
sound output of 115dB(A) at 1m and utilises red and green comfort LED’s
which also act as diagnostic indicators.
The grade 3 Multibox plus monitors the battery to ensure it
is capable of supporting sound output and any problems
will be reported back to the panel via the fault output.
There is also a test input that is used in conjunction with
the fault output to allow remote testing.
Multibox Standard
• EN50131-1:2006 + A1 grade 2
EN50131-4:2009 type Z
• System 5
• Independently certified
• SAB
• Strobe saver
• Battery monitoring
Multibox Plus
Same as the standard with:
• EN50131-1:2006 + A1 grade 3
EN50131-4:2009 type Z
• System 5
• Independently certified
• SAB/SCB
• 3/15 minute fail-safe timer,
• Option to change triggering method from
negative to positive trigger
• Additional tamper switch on the cover screw
• Trigger wire monitoring
• 2 sound output levels (115dB(A) or 85dB(A)
• FREE
*
External
Sounder covers
• FREE Design
• FREE Printing
- Screen print
**
- Digital print
• Range of colours
- inc Chrome
***
* Some Distributors may charge a nominal fee. Doesn’t
include chrome. ** 1 or 2 colour screen print - extra
colours may incur a charge. *** Chrome lids only
available in certain shapes.
Go to www.cqr.co.uk for a full
range of CQR and FIREBRAND products
Multibox
This remotely powered sounder features a piezo
sounder and two bright LED’s for audible and visual
indication. The sound output is selectable for either
alternating or continuous tone. It is also protected against tampering by means of
lid removal and removal from the mounting surface.
Piccolo
• Low profile design • 115dB sound output
• Selectable alternating or continuous tone • Flashing alarm indication
• Low current consumption • Tamper protected lid and mounting
• Grade 3 version available
EXTERNAL SOUNDERS
INTERNAL SOUNDERS
6
2 NEW covers now available
• External Sounders
• Internal Sounders
• Sounders
• Speakers
• Horns
• Buzzers
• Piezo
The Orion is a low profile external sounder and comes in two versions,
vertical and horizontal. The backplate is made from 3mm polycarbonate
and has adjustable wall mountings to allow for the movement of the fixing
holes when installing. Moulded into the backplate are two knockout
spacers (2mm & 4mm) for use on uneven surfaces. The cover is also
made from 3mm polycarbonate and comes complete with either one or
two lenses depending on the version. The special hinged flush fitting
covers conceal the cover screws.
. EN50131-4:2009 type Z • Enclosed electronics
• SAB/SCB option • Trigger wire monitoring option
• Vertical and horizontal options available • Sound output 115dB(A)
• Remote test input
• Fault output
Orion
A fully functional sounder and strobe in miniature form that can be used
internally or externally. The Intra contains a 6V rechargeable battery for
SAB operation and a 15 minute failsafe timer.
Intra
The CQR Solara sounder utilises the latest generation of low power
RF transceiver technology. This provides a fully supervised two-way
communication with any standard control panel, allowing for true wire
free installation and operation. The Solara is installer friendly and offers
selectable failsafe cut-off timer, strobe saver mode and battery status
indication. The onboard solar panel float charges the internal battery
ready for use.
Solara
Low profile, grade 3, independently certified sounder, speaker or
combined sounder/speaker
Also available as a combined speaker / sounder
Alto
Internal Sounder
• Low profile design
• 110dB(A) sound output
• Selectable alternating or continuous tone
• Low current consumption
• Tamper protected lid and mounting
• Independently certified
• Incert approved
• EN50131-1:2006 + A1 grade 3
EN50131-4:2009
Internal Speaker
• Low profile design
• Tamper protected lid and mounting
• Dynamic piezo technology
• High Impedance allowing multiple
speakers to be used
• Does not require any 12volt power supply
SOINT 2 - Grade 3 - A sleek white low profile louvre-free housing containing
a sounder, that will blend discreetly into any surrounding.
SOINT 2 HI-LO - Grade 3 - The SOINT2 HI-LO low profile housing contains
a multi tone sounder, with separate inputs for exit time and alarm sound.
SOINT 1 - A sleek white low profile louvre-free housing containing just a
speaker
Soint
EXTERNAL SOUNDERS
INTERNAL SOUNDERS
• EN50131-1:2006 + A1 grade 2 • Sound output 115dB(A)
EN50131-4:2009 type Y
• EN50131-1:2006 + A1 grade 2 • Sound output 115dB(A)
EN50131-4:2009 type Y
7
Product Guide www.cqr.co.uk
• Mass inertia shock sensor module for reliable shock detection on any surface
• Less sensitive to wind and traffic generated vibrations due to unique crow bar leverage action
• Self cleaning & highly resistant to contact degradation
• Alarm memory: up to 10 Trappers with individual annunciation
• Slave Sensors: up to 2 CQR shock sensors and/or magnetic contacts
Features:
• PIC microchip controller • Auto learn sensitivity control
• Tri-colour LED status Indication • Time window pulse count
• Sequential alarm memory for units 1 to 10 • Slave sensor facility
• Digital sensitivity adjustment using jumpers • Tampered
• Dimensions: 21 x 25 x 92mm
Trapper - Intelligent Shock Sensor & Analyser
Works in conjunction with CQR shock sensor range.
• Single zone universal shock sensor analyser
• Uses the well proven time/pulse Integration System
• Features a wide-range sensitivity control, auto-reset alarm relay & LED indicator
• Can be located within an alarm control panel or mounted externally
• Microswitch cover removal tamper
• Can be used to supervise up to 10 shock sensor modules
• Dimensions: 80 x 53 x 25 mm
MA100T
Shock Sensors
SD1 - Flush mounted shock sensor
• 13mm Diameter hole required for truly unobtrusive sensor
• Dimensions: 15 x 15 x 13mm
SD2 - Small, screw terminal surface mounted shock sensor
• Dimensions: 50 x 28 x 17mm
SD3 - Surface mounted shock sensor in tampered box
• Dimensions: 50 x 28 x 17mm
SD4 - Surface mounted shock sensor with magnetic reed switch
• Magnetic reed switch connected in series to the shock sensor
• Tamper protected cover
• Dimensions: Shock Sensor – 50 x 28 x 17mm
Magnetic Case –
50 x 10 x 12mm
DETECTION
8
Product Guide www.cqr.co.uk
Features include:
• Reverse battery protection
• Over current protection
• 3 Box sizes available
Single Indicator
CQR offer a range of energy efficient switch mode power supplies. Switch mode power supplies are
cheaper to run, smaller and cooler than traditional linear power supplies because they do not have
a large transformer. All of CQR’s switch mode PSU’s have additional current available to charge
batteries.
Box Type
Box A Box B Box C
Size
230 x 170 x 100 260 x 320 x 100 400 x 425 x 100
Weight
2.0Kg 3.5 Kg 4.5 Kg
Max No. of Batteries (12V 7AH)
1 2 3
Features include:
• Reverse battery protection
• Over current protection
• Standby indicator
• 3 Box sizes available
Multi Indicator
Features include:
• Reverse battery protection
• Battery load test monitoring (G3)
• Over current protection
• APS fault relay and LED
• 3 Box sizes available
Graded
• Battery low voltage monitoring
• Battery deep discharge protection
• Over voltage protection
• EPS fault relay and LED
• Over voltage protection
• AC ‘On’ indicator
• 12V Output fuse fault indicator
• Battery fail
• Over voltage protection
• AC ‘On’ indicator
1 Amp 2 Amp 3 Amp 5 Amp
12 Volt
ü ü ü ü
24 Volt
ü ü
1 Amp 2 Amp 3 Amp 5 Amp
12 Volt
ü ü ü ü
24 Volt
1 Amp 2 Amp
Grade 2 Grade 3 Grade 2 Grade 3
12 Volt
ü ü ü ü
24 Volt
ü
4 Way Splitter
• 4 Individually fused outputs
• 4 Fault output LED’s
• Suitable for use with 3 - 5 amp
power supply
Splitters
8 Way Splitter
• 8 Individually fused outputs
• 8 Fault output LED’s
• Suitable for use with B-Box
power supply
DETECTION
SWITCH MODE POWER SUPPLIES
• Reduces Power
Consumption
• Resettable Fuses
• Saves Money
• Full Current to Load
• Eco Friendly
9
2Y-LINK ® is a unique CCTV transmission system developed with patented two-wire technology.
It uses only one pair of wires to supply power to the camera and at the same time transmit video,
audio and other signals in the same pair of wires between the surveillance site and the control room.
The transmission distance can be up to 1500m, depending on the choice of 2Y-LINK ® models.
The 2Y-LINK ® CCTV transmission system consists of the following devices:
Mixer
This is a compact, weather-proof device installed close to each camera,
it receives DC power and receive signals (like audio signal, control data
etc…) from the control room and at the same time, transmits video and
other signals back to the control room down the same pair of wires.
Signal Processor
Installed close to the DVR/monitor in the control
room. It supplies power and transmits control data
and audio signal through a single pair of wires to
each camera. At the same time it receives, through
the same pair of wires, video and other signals
continuously from the camera(s) and channels them
to the DVR/monitor/applicable equipment. Single
channel, 4 channel, 12 channel and 16 channel
signal processors are available.
DC power supply
The power supply is either built inside or connected externally to Signal Processor in the control
room to supply power to the cameras/Mixers of the CCTV installation.
• HIGH quality real time video as good as a coaxial installation
• EXCELLENT immunity to electromagnetic interference
• NO power points and adapters close to camera are required
• NO polarity restriction on the connection of two-wire
• REDUCED installation cost
• A single Cat.5e can support 4 camera’s
• Combination of Cat.5e and Bell cable
2Y-LINK CCTV
10
Product Guide www.cqr.co.uk
The FP3 is available in a variety of colours to suit different applications.
The red is available as single pole and is certified to EN54-11 and CPD.
The green, white and yellow are available as single or double pole.
FP3
• Available as double pole or single pole
• Key resettable
• Red - jumper selectable end of line resistors 470-680 Ohms
• White, yellow & green for use in other applications such as Access Control
• Lift up cover available
• CPD Certified
A range of Stainless Steel green domed, push plate and standard architrave exit
buttons designed to meet the most robust applications and to comply with Risk
Assessment RA001 and EN50133/Industry Codes of Practice. Designs have been
made to comply with Health & Safety regulations
Exit Buttons
Go to www.cqr.co.uk for a full
range of CQR and FIREBRAND products
Available as a 5, 8 or 24 terminal with a unique 2 terminal lid tamper
Grade 3
Available in white or brown
Tampered
Available as a 5, 12, 24 way screw terminal with lid and base tamper
Microswitch tamper
Optional base tamper
Grade 3
Available in white or brown
Multi Tampered
The JB757 is a 12 way Junction Box which features a micro-switch lid tamper. It
comes in a weather proof housing, is Grade 3 compliant and rated to Environmental
class III.
The unique features of the JB757 is its ability to accommodate different sizes of
trunking with its unique knock-out adapters and it will also accept standard conduit
by changing the adaptors to suit your application.
Environmental Class III
2Y-LINK CCTV
ACCESS
JUNCTION BOXES
11
FIRE & SECURITY
A Member of
Contact us:
Phone:
Tel: +44(0)151 6061000
Fax: +44(0)151 6061122
Address:
CQR Fire & Security, 125 Pasture Road,
Moreton, Wirral, CH46 4TH, UK.
Online:
Web: www.cqr.co.uk Email: info@cqr.co.uk
