ASME IMECE 2018 Program

CONFERENCE

Nov 9 – 15, 2018

David L. Lawrence Convention Center, Pisburgh, PA

EXHIBITION

Nov 11 – 14, 2018

IMECE

ONE GREAT LEARNING EXPERIENCE.

INTERNATIONAL MECHANICAL ENGINEERING

CONGRESS & EXPOSITION

e American Society of Mechanical Engineers

ASME®

Program

Core research competencies in the MEMS

Department at Pitt include:

• Advanced Manufacturing and Design

• Biomechanics and Medical Technologies

• Energy System Technologies

• Materials for Extreme Conditions

• Modeling and Simulation

• Quantitative and In Situ Materials Characterization

Degree programs (with a nearly 100 percent

placement rate):

• Materials Science and Engineering (BS, MS, PhD)

• Mechanical Engineering (BS, MS, PhD)

• Nuclear Engineering (BS, MS)

• Engineering Sciences (BS)

• Certicates in: Nuclear Engineering; Simulation in

Design; and Processing, Properties, and Performance

of Engineering Metals

• Graduate Certicate in Nuclear Engineering is also

offered online

CELEBRATING

150 YEARS

OF ENGINEERING

EXCELLENCE

Since the founding of the mechanical engineering

program at the University of Pittsburgh in 1868, the

Department of Mechanical Engineering and Materials

Science has built a strong reputation for academic

excellence, innovation and advancing research.

UNIVERSITY OF PITTSBURGH

SWANSON SCHOOL OF ENGINEERING

For more information visit

engineering.pitt.edu/mems

COUNTY OF ALLEGHENY

RICH FITZGERALD

COUNTY EXECUTIVE

3URFODPDWLRQ

WHEREAS

, the American Society of Mechanical Engineers (ASME) will host its International

Mechanical Engineering Congress and Exposition (IMECE), the world’s largest interdisciplinary mechanical

engineering conference, on November 9-15, 2018 at the David L. Lawrence Convention Center in Allegheny

County; and

WHEREAS

, ASME is a non-profit membership organization that enables collaboration, knowledge

sharing, career enrichment, and skills development across all engineering disciplines; founded in 1880 by a small group

of leading industrialists, ASME has growth through the decades to include more than 130,000 members in 151

countries – 32,000 of these members are students; and

WHEREAS

, the ASME IMECE will feature more than 470 sessions over 16 technical tracks, 20

track plenary presentations, four technical tours, an exhibit hall and will honor 36 distinguished honorees at various

luncheons and a special Honors Assembly; ASME will also commemorate the contributions of four distinguished

academic leaders: Yehoshua (Shuki) Frostig of the Technion-Israel Institute of Technology, Devdas Pai of North

Carolina A&T State University, Kirti (Karman) Ghia of the University of Cincinnati, and ASME Medalist and

Honorary Member Frank Kreith; and

WHEREAS

, this year, the ASME Auxiliary which provides financial support to 1,273 engineering

students through its scholarship and student loan program, is celebrating its 95

anniversary; the National Science

Foundation is providing a track to allow for interaction with its program directors from two divisions; students will

once again have a forum to present their research, design projects, and other engineering solutions and endeavors; and

ASME has dozens of other speakers and activities established for the attendees of the ASME IMECE.

NOW, THEREFORE, BE IT RESOLVED

that I, Allegheny County Executive Rich

Fitzgerald, by virtue of the authority vested in me, do hereby proclaim November 11-15, 2018 as

“International Mechanical Engineering Congress and Exposition Week” in Allegheny County. As a

mechanical engineer by trade, I’m delighted to host such talented engineers and professionals.

IN WITNESS WHEREOF

, I have hereunto set my hand and caused the Seal of the County of

Allegheny to be affixed this 11th day of November, 2018.

5LFK)LW]JHUDOG

RICH FITZGERALD

WELCOME.............................................................................................................vi

GENERAL INFORMATION

........................................................................vii

FLOOR PLANS..................................................................................................xii

SPECIAL EVENTS

.........................................................................................xix

TRACK PLENARY ....................................................................................xxxiii

TECHNICAL PROGRAM AT-A-GLANCE......................................xlv

TECHNICAL PROGRAM

..............................................................................1

AUTHOR INDEX ...........................................................................................243

COMMITTEE MEETING PROGRAM

.............................................301

EXHIBITOR PROGRAM..........................................................................311

Dear Distinguished Attendees:

Welcome to mighty Pittsburgh, Pennsylvania—The Steel City—

for this year’s annual IMECE! We are thrilled to bring together

colleagues in academia, industry, and government in a stimulating

environment to promote scholarship, innovation, and social

investment not only to advance the mechanical engineering

discipline but also to address technical challenges confronting the

globe.

Through the exchange of ideas and interdisciplinary collabora-

tions, IMECE hopes to facilitate the creation of the next round of

engineering discoveries and developments to improve health care,

transportation, space exploration, new product design and

manufacture, and energy. Our conference comprises 13 Technical

Tracks with over 2,500 p

resentations, representing high-impact

scholarly work that encompasses a diverse range of topics from

the fundamental to the applied. In addition to

the technical sessions, our agenda seeks to build partnerships

among our communities, promote leadership development, and

engage with our students—the future of our society.

We kick off IMECE on Sunday with the Opening Reception

& Undergraduate Research and Desig

n Expo that includes Student

Design and Poster Competitions. Monday morning will open with

an exciting Breakfast Keynote from Frank DeMauro, Vice

President and General Manager of the Advanced Programs

Division of the Space Systems Group of Northrop Grumman. Th

evening, we will hold the Honors Reception and Assembly. Like

last year, we have scheduled the Track Plenary Sessions to be

presented each morning, running Tuesday through Thursday. A

special Breakfast and Plenary Presentation will be given on

Wednesday morning by Mark Hindsbo, Vice President and

General Manager of the Design Business Unit of ANS

YS. On

Wednesday as well, you can nd the General Poster Session,

along with an NSF Workshop, which includes One-on-One

Meetings with Program Managers, and NSF Student Poster

Competitions. To conclude the week on Thursday, our Closing

Plenary Luncheon will feature Vijay Kumar, Nemirovsky Family

Dean of Penn Engineering. As in the past, the Conference Exhibit

runs

from Sunday through Wednesday. We would also like to

highlight several Honoring Symposia, recognizing Prof. Frostig,

the late Prof. Devdas Pai, the late Dr. Kirti (Karman) Ghia, and Prof.

Frank Kreith.

The conference should provide a setting conducive for

professional networking with your colleagues, as well as

involvement opportunities with the society through ASME divisions

and technical committees, whose events you can nd listed in the

program. The ASME Cro

wd Compass Attendee Hub App can

assist you with scheduling the various activities and social breaks.

As always, we are incredibly appreciative of the immense efforts

of our dedicated volunteer organizers and the exceptional ASME

Staff. We thank you, the attendees, in advance for making the

2018 IMECE successful with your contributions, talents, and active

engagement.

We hope that you enjoy IMECE 2018 and our beautiful host “City

of B

ridges.” We look forward to meeting you and learning about

your professional interests at Congress throughout the week.

Sincerely,

Olesya I. Zhupanska

2018 IMECE Technical Program Chair

Stephen D. Tse

2018 IMECE General Conference Chair

Alberto Cuitino

2018 IMECE Technical Program Vice Chair

Rama Koganti

2018 Steering Committee Chair

Francine Battaglia

2018 Steering Committee Vice Chair

Assimina Pelegri

2018 Steering Committee Senate Chair

George Kardomateas

2018 Steering Committee Senate Co-Chair

ASME 2018 International Mechanical Engineering Congress and Exposition (IMECE),

November 9–15, 2018, Pittsburgh, PA, USA

vii

viii

ASME CROWD COMPASS ATTENDEE HUB APP

Download the ASME Crowd Compass Attendee Hub App and hold the entire program at

the palm at your hand! The

ASME Crowd Compass Attendee Hub App allows you to easily

look up sessions, search for papers or people, message with other attendees, and create your

own schedule. Be sure to download the app for the latest information and chances to win prizes.

AUTHORS

SPEAKERS’ PRACTICE ROOM

Room 322 on the third oor of the David L. Lawrence Convention Center is the Authors’/

Speakers’ Practice Room. The schedule is Monday–Thursday, November 12–15, 7:00am–

5:00pm. The room is equipped with two (2) LCD projectors, two (2) laptop computers, and

two (2) screens for authors/speakers to practice their presentations.

SCANNING

All authors are required to have their badge scanned before entering a technical session.

Only fully registered authors are allowed to attend plenary and technical sessions.

AUDIOVISUAL EQUIPMENT IN SESSION ROOMS

All technical sessions are equipped with one LCD projector, one laptop, one screen, and a slide

advance. You may bring your presentation on USB ash drive and load it onto the laptop in the

session room.

BADGES ARE REQUIRED FOR ADMISSION TO ALL ACTIVITIES

All conference attendees must wear their ofcial IMECE 2018 conference badge in order to gain

admission to conference sessions, events, and activities. No one will be admitted to the technical

sessions unless he/she is registered and wearing a badge that shows “Full Conference.”

BUSINESS CENTER

There is no business center located in the convention center. FedEx/Kinkos is located across

from the Convention Center at 960 Penn Avenue, Pittsburgh, PA 15222. Services include,

but are not limited to, laser and color printing, document scanning, and ground/air shipping.

For more information, you can contact this location at (412) 391-2014.

Hours of Operation

Monday–Friday

7:30am–9:00pm

Saturday 8:00am–6:00pm

Sunday Closed

CHILDCARE SERVICES (NEW BENEFIT FOR IMECE 2018)

For those needing childcare services this year, we are pleased to be offering a new benet for

IMECE 2018.

ASME will reimburse up to a total of $250/per registered 2018 IMECE attendee for childcare

services incurred by a licensed service provider while attending IMECE November 9–15, 2018,

between the hours of 8am–5pm. Below is a list of local companies, provided by Visit Pittsburgh.

Please note that neither Visit Pittsburgh nor ASME is recommending any one company.

Additionally, ASME suggests you may wish to consult with your local hotel concierge for

additional licensed service provider suggestions.

Nanny Poppinz

412-307-4914

http://www.nannypoppinz.com/agency/nanny-childcare-pittsburgh-pennsylvania.html

East Wind Nannies

412-467-6396

tps://eastwindnannies.com/pittsburgh

Urban Sitter

This site will review each person, give their pricing, and list out their experience. You will need

to join to see each person’s full prole.

https://www.urbansitter.com/college-babysitters/university-of-pittsburgh

ASME (BOOTH 209)

Two Park Avenue

New York, NY 10016-5990 USA

+1 800-THE-ASME

(800-843-2763)

www.asme.org

ASME is a not-for-prot

membership organization that

enables collaboration, knowledge

sharin

g, career enrichment, and

skills development across all

engineering disciplines, toward

a goal of helping the global

engineering community develop

solutions to benet lives and

livelihoods. Founded in 1880

by a small group of leading

industrialists, ASME has grown

through the decades to include

more than 130,000 members

in 151 countries. Thirty-two

thousand of these members

are students.

While at IMECE, take time to visit

the ASME booth in the Exhibit

Hall, Hall B on the second oor

of the David L. Lawrence

Convention Center. Learn about

ASME’s two newest Journals

Medical Diagnostics

and

Nondestructive Evaluation

and pick up information about

ASME Transactions Journals,

Proceedings, ASME Press books,

Codes & S

tandards, Catalogs,

and The ASME Digital Collection.

Representatives from ASME

Publications and Membership

will be present to answer your

questions

KinderCare

412-765-3973

They are not able to provide babysitting services off-property but they do provide child care in

their downtown location. They are open 6:30am-6:30pm.

CONTINENTAL BREAKFAST

Continental breakfast will be served on Monday, November 12 & Wednesday, November 14,

prior to the presentations in Ballroom A and Tuesday & Thursday, November 13 & 15, in the

Ballroom Foyer of the David L. Lawrence Convention Center. Fully paid attendees are entitled

to attend. The schedule is as follows:

Monday, November 12 7:30am–8:00am *Ballroom A

Tuesday, November 13 7:30am–8:00am

Wednesday, November 14 7:30am–8:00am *Ballroom A

Thursday, November 15 7:30am–8:00am

GIVE-BACK PROJECTS

Help us to help the community! This year we would like to support two important local

charities, see how you can participate.

Kids In Need Foundation

The Kids In Need Foundation provides low-income schools with the supplies needed to

participate and engage in the classroom. Drop off crayons, glue sticks, markers, notebooks,

pencils, and pens.

Women’s Center & Shelter of Greater Pittsburgh

Donate your old smartphones and cell phones to Women’s Center & Shelter and you are

supporting victims of domestic violence. Donated phones are sent to the Shelter Alliance

Program, which will result in a monetary donation to Women’s Center & Shelter to benet

programs and services for survivors of domestic abuse.

There are drop off locations for both charities in the registration areas at the Westin Hotel and

David L. Lawrence Convention Center.

GUEST HOSPITALITY AND FAMILY MEETING ROOM

The hospitality room is located in Pennsylvania East, on the second oor of the Westin Hotel.

The schedule is as follows:

Sunday, November 11 7:00am–9:30am

Monday, November 12 7:00am–9:30am

Tuesday, November 13 7:00am–9:30am

Wednesday, November 14 7:00am–9:30am

LUNCH

Conference lunches will be served Monday–Wednesday, November 12–14, in Hall B of the

David L. Lawrence Convention Center. On Thursday, November 15, lunch is served in Ballroom

A on the third oor. Fully paid attendees are entitled to attend. The schedule is as follows:

Monday, November 12 11:30am–12:30pm

Tuesday, November 13 11:45am–12:45pm

Wednesday, November 14 11:45am–12:45pm

Thursday, November 15 12:40pm–1:10pm

MEETING INFORMATION

Main meeting information is located on the third oor area of the David L. Lawrence Convention

Center. The operating hours are as follows:

Sunday, November 11 7:00am–6:00pm

Monday, November 12 7:00am–6:00pm

Tuesday, November 13 7:00am–6:00pm

Wednesday, November 14 7:00am–6:00pm

Thursday, November 15 7:00am–5:45pm

EXHIBITS

INFORMATION

The exhibits are located in Hall B

on the second oor of the David

L. Lawrence Convention Center.

The expo hall is your social hub!

Be sure to visit the exhibitors and

check out the Education Theater,

poster sessions, and lounge.

The exhibit hours are as follows:

Sunday, November 11

5:30pm–7:00pm

Monday, November 12

11:30am–4:00pm

Tuesday, November 13

11:45am–4:00pm

Wednesday, November 14

11:45am–4:00pm

EMERGENCY

INFORMATION

Alert convention center staff by

picking up a white house phone

to report a medical or security

emergency. Describe the exact

location of the incident and the

nature of the emergency.

Whenever an emergency situation

is detected and announced,

everyone is expected to evacuate

the facility and safely assemble

outside until the “All Clear” is

given. Be sure to move to a safe

distance and check the App for

updated information.

MEMBERSHIP TO ASME (ONE YEAR FREE)

Registrants who paid the non-member conference registration fees will receive a one-year

ASME Membership. ASME will automatically activate this complimentary membership for

qualied attendees. Please allow approximately four weeks after the conclusion of the

conference for your membership to become active. Visit www.asme.org/membership for more

information about the benets of ASME Membership.

MOTHER’S ROOM

The David L. Lawrence Convention Center offers a dedicated space for parents of newborns/

infants to be used as a private space for nursing mothers. When at the convention center,

please ask a staff member for the location of the mother’s room on the second level and how

to gain access.

OPENING RECEPTION

Exhibit Hall Grand Opening and Opening Reception

5:30pm–7:00pm

Hall B, David L. Lawrence Convention Center

All registrants are invited to this special event to celebrate the opening of the IMECE exhibits.

Come grab a drink and some food, meet this year’s group of exhibitors, and learn about their

products and services.

POSTER PRESENTATIONS

Poster presentations will be held at the following times:

Sunday, November 11, 2018

5:30pm–7:00pm

Hall B, David L. Lawrence Convention Center

Undergraduate Research and Design Expo Student Poster Competition

Poster Setup: 2:30pm–3:30pm

Poster Judging: 3:30pm–6:30pm

Expo (General Viewing): 5:30pm–7:00pm

Winners Announced: 6:30pm–7:00pm

Wednesday, November 14, 2018

11:45am–3:00pm

Hall B, David L. Lawrence Convention Center

NSF Student Competition (Posters Only)

Poster Setup 10:00am–11:45am

General Viewing/Judging 11:45am–2:30pm

Awards 2:30pm–3:00pm

Virtual Podium (Posters Only)

Poster Setup 10:00am–11:30am

General Viewing 11:45am–2:30pm

PRAYER ROOM

Room 415 on the fourth oor of the David L. Lawrence Convention Center is exclusively for

those who need to pray in between sessions. There will be dividers in the room to create a

semi-private space.

PRESENTER ATTENDANCE POLICY

According to ASME’s Conference Presenter Policy, if a paper is not presented at the

Conference by a fully registered author of the paper, the paper cannot be published in the

ofcial archival Proceedings, which are published on The ASME Digital Collection post-

conference. Papers not presented at the conference cannot be cited.

PHOTOGRAPHY

ASME has retained the services

of a photographer to capture

photo images of the events and

activities from the conference.

The photographer will be taking

photos as assigned by the ASME

Communications Department.

All photographs are the sole

property of ASME, and ASME

retains all rights in and to said

photographs. These photographs

may be used for promotional

purposes only, including, but not

limited to, the ASME website.

If you require more information

about the use of IMECE

photographs, please go to the

media desk at Conference

Registration.

RIBBON CUTTING

Join us on Sunday, Novmeber

11th at 5:25pm for the ribbon

cutting ceremony outside of

Exhibit Hall B.

PUBLICATIONS: IMECE2018 CONFERENCE PAPERS AND

PROCEEDINGS

Technical papers accepted for publication for IMECE2018 will be available through a dedicated

Online Papers site available to all fully paid attendees beginning a week before the conference.

• Post-conference, an ISO batch le and two zip les will be made available on the Online

Papers site so that users can download to their personal computer systems.

• Post-conference, papers presented at the conference will be published as the ofcial

Proceedings of the conference on The ASME Digital Collection

(asmedigitalcollection.asme.org). Authors may refer t

o The Collection for DOI links and

citation information for their papers.

All ASME conference Proceedings are disseminated worldwide and submitted for indexing to

SCOPUS, COMPENDEX, the ISI Conference Proceedings Citation Index, and several other

indexing and discovery services. For further information about ASME Publications, please stop

by the ASME Booth at the Exhibit Hall.

REFRESHMENT BREAKS

Morning Break – Ballroom Foyer

Monday, November 12 9:30am–9:45am

Tuesday, November 13 9:45am–10:00am

Wednesday, November 14 9:45am–10:00am

Thursday, November 15 10:40am–10

:50am

Afternoon Break – Exhibit Hall B unless otherwise noted

Monday, November 12 3:30pm–3:45pm

Tuesday, November 13 3:00pm–4:00pm *Join the University of Pennsylvania

for their break reception in the exhibit hall.

Wednesday, November 14 3:30pm–3:45pm

Thursday, November 15 3:50pm–4:00pm (Ballroom Foyer)

REGISTRATION

Conference registration is located in the Exhibit Hall B foyer on the second oor of the David L.

Lawrence Convention Center. The operating hours are as follows:

Sunday, November 11 7:

00am–6:00pm

Monday, November 12 7:00am–6:00pm

Tuesday, November 13 7:00am–6:00pm

Wednesday, November 14 7:00am–6:00pm

Thursday, November 15 7:00am–5:45pm

Registration for committee meetings and special events is located in the Rotunda Area on the

second oor of the Westin Hotel during the following hours:

Friday, November 9 8:00am–5:00pm

Saturday, November 10 7:00am–6:00pm

Sunday, November 11 7:00am–6:00pm

Monday, November 12 7:

00am–6:00pm

Tuesday, November 13 7:00am–6:00pm

Wednesday, November 14 7:00am–6:00pm

TECHNICAL SESSIONS

All attendees are required to have their badge scanned before entering a technical session.

Only fully registered conference attendees are allowed to attend plenary and technical sessions.

TICKET SALES

Many division and society awards are given at IMECE. Tickets for these functions may be

purchased on-site at the ASME Registration Desk. Please purchase tickets as soon as possible

after you register. In order to ensure accurate guarantees and avoid disappointment, tickets for

all events will be sold up to 48 hours prior to the event or as long as there is exibility to adjust

the guarantee.

SOCIAL MEDIA

Let’s be social! We encourage you

to use the hashtag #IMECE2018

to tag your social media posts

and photos throughout the

conference.

WIFI

Free Wi-Fi access is provided

to IMECE conference attendees

throughout the David L. Lawrence

Convention Center. Free Wi-Fi

access is also provided in the

hotel rooms at the Westin Hotel

and the Omni Penn Plaza. To

access the Wi-Fi in the

convention center and the Westin

Hotel use these credentials:

David L. Lawrence Convention

Center

Network: IMECE

Password: imece2018

Westin Hotel

Network: Westin

_Conference

Password: imece2018

xii

DAVID L. LAWRENCE CONVENTION CENTER – SECOND FLOOR

xiii

DAVID L. LAWRENCE CONVENTION CENTER – SECOND FLOOR

xiv

DAVID L. LAWRENCE CONVENTION CENTER – FOURTH FLOOR

WESTIN HOTEL

SECOND FLOOR

THIRD FLOOR

GUESTTOURS

CITY TOUR OF PITTSBURGH

Sunday November 11th | 9:30am–12:30pm

Price: $55 per person

Check out the great city of Pittsburgh and see why it’s one of the hottest cities in the country.

Our knowledgeable tour guide will host this three-hour bus tour that will highlight the following:

North Shore – featuring PNC Park and Heinz Field stadiums and a stunning view of downtown

Pittsburgh and its many golden bridges

Downtown – “Golden Triangle” with its diverse architecture of old and new. The city is shaped

as a triangle with the be

autiful Point State Park at the tip, where the conuence of two rivers

forms a third.

Strip District – The one-half square mile shopping district is chock full of ethnic grocers,

produce stands, meat and sh markets, and sidewalk vendors.

Oakland – Pittsburgh’s “Meds and Eds” hub — This area is home to world-renowned hospitals

as well as the University of Pittsburgh, Carnegie Mellon University, and so much more.

Mt. Washington – Stand on one of the observation decks and take in the spectacular

panorama of the downtown skyline below and see how the Monongahela and Allegheny Rivers

form the Ohio River and at the city’s “Point.”

USA Today

named the view from Mt. Washington

one of the 10 most beautiful views in America.

TOUR OF FALLINGWATER

Monday November 12th | 9:30am–3:30pm

Price: $75 per person

Fallingwater is a house designed by architect Frank Lloyd Wright in 1935 in rural southwestern

Pennsylvania, 43 miles (69 km) southeast of Pittsburgh. The house was built partly over a water-

fall on Bear Run in the Mill Run section of Stewart Township, Fayette County, Pennsylvania,

locate

n the Laurel Highlands of the Allegheny Mountains. The house was designed as a

weekend home for the family of Liliane Kaufmann and her husband, Edgar J. Kaufmann, Sr.,

owner of Kaufmann's Department Store.

After its completion,

Time

called Fallingwater Wright’s “most beautiful job,” and it is listed

among Smithsonian’s “Life List of 28 places to visit before you die.” The house was designated

a National Historic Landmark in 1966. In 1991, members of the American Institute of Architects

named Fallingwater the “best all-time work of American

architecture” and in 2007, it was

ranked 29th on the list of America’s Favorite Architecture according to the AIA.

This guided house tour will provide you full access to this iconic landmark. Stay and shop in the

gift shop, tour the grounds, and have lunch in the café.

TECHNICAL TOURS

CARNEGIE MELLON UNIVERSITY LABORATORY TOUR – SOLD OUT

Monday, November 12

1:00–4:00pm

Limit 50 guests

$25

Carnegie Mellon College of Engineering is world renowned and focuses on innovative,

interdisciplinary, and global education and research. All visitors will tour various labs, including:

Makerspace: The TechSpark makerspace is Carnegie Mellon University’s focal point for

technology innovation. This College of Engineering facility provides equipment for rapid

fabrication of designs from idea to reality for coursework, research, and entrepreneurship,

which includes Rabid Fabrication with Laser Machines.

Soft Machines Lab: The Soft Machines Lab develops materials and technologies that enable

machines and robots to be safe for human contact. W

e focus on cre

ating soft multifunctional

materials that can act as articial skin, muscle, and nervous tissue for applications in bio-

inspired soft robotics, humanoid robotics, and wearable computing. Visitors will see the lab

space and interact with some of the novel “soft-matter" technologies that we have recently

discovered.

xvi

ALL TOUR BUSES

LEAVE AT THE DLCC,

CORNER OF 10TH &

FRENCH STREETS

Robomechanics Lab: The Robomechanics Lab works on designing robots that can operate in

challenging real-world environments. We will be showing several robotic platforms, including

the four-legged Minitaur robot as well as a cheetah-inspired robot tail, a wheeled rover that can

dig trenches in sandy terrain, and new robotic hooves that will allow a robot to climb steep

rocky terrain.

Additive Manufacturing Lab: Tour the newly renovated metals additive manufacturing (AM) lab

within the Mechanical Engineering Department and administered by the CMU Next

Manufacturing Center. Equipment includes Optomec Aerosol Jet, EOS Laser Sintering, Arcam

E-Beam Sintering, and ExOne Binder Jet AM machines. Parts fabricated by these machines

support both fundamental research and educational efforts, including new undergraduate minor

and master’s degrees in AM.

Thermal Energy Engineering Lab: The Thermal Energy Engineering Labs seek to understand

the underlying physics of thermal energy transport. The tour will focus on thermoreectance

techniques, which allow us to directly measure properties like thermal conductivity and thermal

interface resistance in both nano- and macroscale materials. These properties are critical to

thermal management in next generation electronics and to optimize the efciencies of solid

state energy conversion devices.

UNIVERSITY OF PITTSBURGH HUMAN ENGINEERING RESEARCH LABORATORIES –

SOLD OUT

Tuesday November 13

9:30am–12:00pm

Limit 50 guests

$25

The Human Engineering Research Laboratories (HERL) is a collaboration between the

University of Pittsburgh, the VA Pittsburgh Healthcare System, and UPMC Health System.

HERL is dedicated to wheelchair and mobility research, specically by improving the mobility

and function of all people with disabilities through advanced engineering in clinical research

and medical rehabilitation on local, national, and international levels. HERL also studies

robotics in assistive technology, athletics in rehabilitation, assistive living spaces, wheelchair

transfer efciency, clinician training, and force and vibration on wheelchair users. Attendees will

gain an understanding of the work being done at the Laboratories.

WESTINGHOUSE WALTZ MILL OPERATIONS – The Center of Excellence for

Westinghouse’s Global Field

Services in Americas and Asia

Wednesday November 14

12:30pm–4:00pm

Lim

it 30 guests

$25

Each spring and fall Westinghouse executes a series of outages at nuclear power plants

across the United States. It is extremely important that these outages are executed efciently

and that emergent issues are dealt with on an expedited basis. Westinghouse provides outage

services anywhere from approximately 20 to 40 customer sites each outage season (spring

and fall). This requires Westinghouse to staff anywhere from 2,000 to 2,500 positions utilizing

approximately 800 pers

nel. In order to achieve efciency and predictability in execution,

Westinghouse has an extensive training program that utilizes two training bays equipped

with mock-ups and equipment to effectively prepare personnel for site operations. Tooling

sophistication varies from the simplistic to complex robotic systems. The deployment of

personnel and equipment along with the day-to-day response to ongoing outage operations

proves to be quite a logistical endeavor. Westinghouse has developed process and procedures

along with a Westinghouse Outage Control Center to manage the complexity of outage

operations across multiple sites. Westinghouse invites you to come tour our facility and engage

in outage service execution discu

ssion. The tour is scheduled to take place from 1:30 to

3:00pm. Visitors are reminded that they must wear closed-toed shoes and no photography

is permitted on the premises. This tour will be open to the rst 30 participants who register.

Attendance will be subject to approval.

xvii

ALL TOUR BUSES

LEAVE AT THE DLCC,

CORNER OF 10TH &

FRENCH STREETS

ANSYS CORPORATE HEADQUARTERS – SOLD OUT

Thursday November 15

8:30am–11:30am

Limit 50 guests

Cost $25

Visit the world headquarters of ANSYS, global leader in engineering simulation. Here, advanced

software tools that help engineers simulate diverse physics such as uid dynamics, structures,

electronics, semiconductors, and embedded software are planned, developed, and marketed.

In this “insider’s” tour, you will:

• Tour the workspace and meet the team that develops ANSYS Mechanical

• Learn about advanced simulation concepts and technologies

• Understand the process used to validate, verify, and demonstrate that simulation codes

deliver results that match physical testing

• Try ANSYS Discovery Live, an interactive experience in which you can manipulate geometry,

materials types, or physics inputs, then instantaneously see changes in performance

• Read posters on a variety of advanced uids, structures, and multiphysics topics

ASME LANDMARKS

Pittsburgh is a city of engineering innovation and home to the Duquesne and Monongahela

Inclines—two ofcial ASME Historical Landmarks. These funiculars have been in operation

for over 140 years, transporting pedestrians from the uphill neighborhoods to the industry

by the riverbanks. Designed by engineer John Endres, they are the oldest and last of the

original seventeen inclines in Pittsburgh and are examples of 1

9th and early 20th century

transportation—still in action today! Designated Historical Landmarks in 1977, the city views

are spectacular—offering sweeping views from Mt. Washington of the three rivers and the

beautiful city—and the engineering history speaks for itself. The landmarks are approximately

one mile in distance from each other.

Traveling to Monongahela Incline – from Westin Convention Center

Parking is free.

8 minute drive from Westin Convention Center

Bus fares are only $2.50 one way, exact change only.

Bus from Liberty Avenue at 10th Street

Traveling to Duquesne Incline – from Westin Convention Center

Parking is free.

5 minute drive from Westin Convention Center

Bus fares are only $2.50 one way, exact change only.

xviii

** Share your photos

of these engineering

marvels with the hashtag

#ASMELandmarks **

xix

FRIDAY, NOVEMBER 9

ASME Business Meeting

5:00–5:30pm

Allegheny Grand Ballroom III,

Third Floor, The Westin Hotel

Call to order by Said Jahanmir, ASME President, 2018–2019

Report by the Treasurer

Membership Report

2017–2018 Annual Report

State of the Society Video

Report on Proxies Received

Ratication of Auditor

Election of 2019 Nominating Committee

Other Business

SATURDAY, NOVEMBER 10

Old Guard Oral Presentation Competition

9:00am–4:00pm

Westmoreland Central,

Second Floor, The Westin Hotel

All are invited to attend the nals of the Society-level Old Guard

Oral Presentation Competition. Meet the engineering students

who have successfully competed at the 2018 E-Fests and are

now vying for the $2,000 ASME Old Guard Prize for

outstanding presentation skills.

Like all effective professionals, engineers must possess a well-

developed ability to synthesize issues and communicate both

orally and in writing. This competition is designed to emphasize

the value of an ability to deliver clear, concise, and effective

oral presentations, particularly pertaining to some sphere in

which an engineer is or should be involved. Presentation topics

must address a technical, economic, or environmental aspect

of engineering or other basic engineering theme, and often

relate to the students’ engineering design/analysis projects.

For more information, please visit

https://www.asme.org/events/competitions/old-guard-

competitions/old-

guard-prize-oral-presentation-competition/

Old Guard Committee Reception

6:30–7:30pm

Somerset East, Second Floor, The Westin Hotel

Please join us for the 2018 ASME Old Guard Committee

Reception on Saturday, November 10. The ASME Old Guard

Committee will announce the Old Guard Oral Presentation

winners and present them with their award certicates.

SUNDAY, NOVEMBER 11

2018 Student Design Competition Finals @ IMECE

Ballroom B, David L. Lawrence Convention Center

Run of Show | Staff POCs: Erin Dolan (646-369-7248) and

Brandy Smith (917-596-0306)

The 2018 Student Design Competition has challenged the

imagination and technical design skills of all its participants.

At the Finals on Sunday, November 11, teams who’ve

participated in an SDC held at each E-Fest this year will

compete against each other in a modied, four-way football

(soccer) competition. These teams will come equipped with a

strategic game plan, robot(s), and a will to battle it out for the

Championship Title.

SCHEDULE

7:00am–3:30pm SDC Finals (Preliminary Rounds) |

Ballroom B

7:00am–7:30am Staff set signs, tape course/eld, etc.

7:30am–8:00am Team Arrivals and check in

8:00am–9:00am Robot Inspections

9:00am–10:30am Round 1 (on one playing eld)

10:30am–12:00pm Round 2 (on the other playing eld)

12:00pm–1:00pm LUNCH BREAK

1:00pm–1:45pm Semi Finals Round 1 (on one playing eld)

1:45pm–2:30pm Semi Finals Round 2 (on the other playing

eld)

3:00pm–3:30pm FINALS

Members and Students Luncheon

Sponsored by:

Committee on Honors

5:30pm–6:30pm

Ballroom A Foyer,

David L. Lawrence Convention Center

All registered attendees are invited to attend this reception and

meet this year’s Honors Awards Recipients.

Honors Assembly

6:30pm–7:30pm

Ballroom A, David L. Lawrence Convention Center

All registered attendees are cordially invited to attend the 2018

ASME Honors Assembly. This multimedia program celebrates

some of today’s leading engineers, educators, entrepreneurs,

and innovators. This year’s Honors Awards Recipients are:

ASME MEDAL

Thomas J.R. Hughes, Ph.D., Fellow

The University of Texas at Austin

For the pioneering development of computer-aided

engineering and design technologies disseminated in

industrial and commercial software used throughout the

world, thereby improving engineering product development;

and for originating and leading new elds of computational

engineering research.

HONORARY MEMBER

Portonovo Ayyaswamy, Ph.D., Fellow

University of Pennsylvania

For exceptional contributions to mechanical engineering

through a career marked with seminal and groundbreaking

research scholarship, which has engendered transformational

technology transfer for diverse applications; and for exemplary

professional service to the worldwide scientic and practicing

thermal engineering community.

HONORARY MEMBER

Alan Needleman, Ph.D., Fellow

Texas A&M University

For pioneering research in the elds of computational

mechanics and computational materials science.

HONORARY MEMBER

Robert M. Nerem, Ph.D., Fellow

For outstanding contributions to the understanding of

dynamics of blood ow and blood vessels in health and

disease, and the development of tissue engineering for

palliative care; and for leadership in bridging and creating

opportunities for engineers to play a vital role in advancing

medicine.

xxiv

xxv

HONORARY MEMBER

Frank E. Talke, Ph.D., Fellow

University of California, San Diego

For contributions to information storage technology, color ink

jet printing, and medical device technology.

M. EUGENE MERCHANT MANUFACTURING MEDAL OF

ASME/SME

Kamlakar Rajurkar, Ph.D., Fellow

University of Nebraska – Lincoln

For pioneering contributions to enhance the productivity of

nontraditional machining processes used in automobile,

aerospace, and medical device manufacturing, including

electrical discharge machining and electrochemical machining

at macr

o-, micro-, and nanoscales, through extensive research

in process modeling and in sensing and control techniques.

MELVIN R. GREEN CODES & STANDARDS MEDAL

Richard William Barnes, Fellow

ANRIC Enterprises Inc.

For distinguished leadership and professionalism in the

research, development, promotion, acceptance, and

application of ASME codes and standards; and for direct

senior management involvement in the design, construction,

and operational support of nuclear power plants.

NANCY DELOYE FITZROY AND ROLAND V. FITZROY

MEDAL

Ivar Giaever, Ph.D., Member

Applied BioPhysics, Inc.

For innovative experimental work in superconductor tunneling

that led to a major advance in the understanding of the

phenomenon of superconductivity and to new scientic

instruments.

RALPH COATS ROE MEDAL

Gwynne Shotwell

SpaceX

For outstanding leadership in innovation for space

commercialization and colonization; for technical contributions

to the design of reusable rockets; and for dedication to the

prom

otion of STEM education.

TUESDAY, NOVEMBER 13

ME/MET Department Heads Professional

Development Workshop

10:30am–12:00pm

Westmoreland Central & East,

Second Floor, The Westin Hotel

As part of our ongoing effort to provide resources and

development opportunities for department heads/chairs, this

workshop will explore many topics. Examples from previous

workshops are becoming a department head/chair, funding

priorities and how to handle budget cuts as well as

development, fund-raising, and alumni engagement.

Heat Transfer Division Awards Luncheon

Sponsored by:

Heat Transfer Division

11:45am–1:45pm

Pennsylvania East & West,

Second Floor, The Westin Hotel

Ticket: $50

HTD Memorial Award (Science): Dr. Li Shi

HTD Memorial Award (General): Dr. Timothy Fisher

HTD Memorial Award (Art): Dr. M. Pinar Mengüç

Bergles-Rosenhow Young Investigator Award: Dr. Asegun

Henry

Guest Luncheon

Sponsored by:

ASME Auxiliary – Celebrating 95 Years!

1:00pm–3:00pm

Westmoreland West, Second Floor, The Westin Hotel

Ticket: $40

The ASME Auxiliary welcomes ASME members to an afternoon

of great food and refreshments at its semi-annual Guest

Luncheon.

The ASME Auxiliary’s guest speaker and past scholarship

winner will be Vickie Webster-Wood, Ph.D. from Carnegie

Mellon University. Dr. Webster-Wood’s presentation will be on

“Living Machines: Bio-inspired, Bio-hybrid, and Organic

Robots.” Please join us for this exciting presentation.

Symposium for New and Prospective Faculty:

Tips for Tenure and Promotion

1:30pm–3:00pm

Westmoreland Central & East,

Second Floor, The Westin Hotel

This workshop is designed for junior faculty, postdocs, and

Ph.D. students. There will be a panel discussion in which the

panel will share insights into the job search, promotion, and the

tenure process. The panelists will provide recommendations

from their own experience, including best practices and what

to avoid. They will also answer questions from the audience.

Materials Division Sia Nemat-Nasser Award Lectures

3:45pm–4:45 pm

Room 409, David L. Lawrence Convention Center

Tak-Sing Wong,

Department of Mechanical and Nuclear

Engineering and Materials Research Institute, The Pennsylvania

State University, University Park, Pennsylvania

Tak-Sing Wong is currently an assistant

professor of mechanical engineering and

biomedical engineering and the inaugural

holder of Wormley Family Early Career

Professorship in Engineering at The

Pennsylvania State University. Dr. Wong was

a Croucher Foundation Postdoctoral Fellow at the Wyss

Institute for Biologically Inspired Engineering at Harvard

University. He received his Ph.D. (2009) in the Mechanical

and A

erospace Engineering Department at UCLA and his

B.Eng. (2003) in Automation and Computer-Aided Engineering

from The Chinese University of Hong Kong. Dr. Wong’s

research focuses on surface and interface, micro- and

nanomanufacturing, as well as designing multi-functional

biologically inspired surfaces with applications in water,

energy, and health. His research has been published in

Nature

Nature Materials

Nature Communications

PNAS

, and

Science Advances

. His work on bio-inspired materials has

been recognized with a R&D 100 Award, a National Science

Foundation CAREER Award, a DARPA Young Faculty Award,

as well as an invitation to the National Academy of

Engineering’s U.S. Frontiers of Engineering symposium.

Dr. Wong has also been named one of the world’s top 35

Innovators Under 35 (formerly TR35) by

MIT Technology

Review

and was recognized with the IEEE Nanotechnology

Council Early Career Award in Nanotechnology and the ASME

Sia Nemat-Nasser Early Career Award for his contributions in

bioinspired materials engineering.

Title: Interfacial Engineering Inspired by Nature

Yihui Zhang,

Department of Engineering Mechanics, Tsinghua

University, Beijing

Yihui Zhang is an Associate Professor of

Engineering Mechanics at Tsinghua University.

He received his Ph.D. in engineering

mechanics from Tsinghua University in 2011.

Then he worked as a Postdoctoral Fellow from

2011 to 2014 and as a Research Assistant

Professor from 2014 to 2015, both at Northwestern University.

He joined the Department of Engineering Mechanics at

Tsinghua University in 2015 and was tenured in 2018. His

research interests include mechanically guided 3D assembly,

soft composite materials, a

nd stretchable electronics. He has

published more than 90 peer-reviewed journal papers,

including two in Science, eleven in Nature sister journals, three

in Science Advances, four in PNAS, eight in the Journal of the

Mechanics and Physics of Solids, three in ACS Nano, and eight

in Advanced Functional Materials. His recent awards include

ASME Sia Nemat-Nasser Early Career Award (201

8), Society of

Engineering Science’s Young Investigator Medal (2018),

Eshelby Mechanics Award for Young Faculty (2017), ASME

Melville Medal (2017), Journal of Applied Mechanics Award

(2017), MIT Technology Review's 35 Innovators Under 35

(TR35 Award) (2016), and Qiu Shi Outstanding Young Scholar

Award (2016). He is an associate editor of the Journal of

Applied Mechanics (ASME Transactions), and serves on the

editorial board of several academic journals, including

Proceedings of the Royal Society A and npj Flexible

Electronics.

Title: Bio-inspired Soft Network Materials With Unusual

Mechanical Properties

Materials Division Nadai Medal Award Lecture

4:45pm–5:45pm

Room 410, David L. Lawrence Convention Center

The Nadai Medal goes to George M. Pharr for “Measurement

of Power Law Creep Parameters by Nanoindentation”

George M. Pharr is TEES Eminent Research

Professor in the Department of Materials

Science and at Texas A&M University,

College Station, TX. He received his B.S. in

Mechanical Engineering at Rice University in

1975 and Ph.D. in Materials Science and

Engineering from Stanford in 1979. After one year of

postdoctoral study at the University of Cambridge, England,

he returned to Rice in 1980 as a faculty member in the

Department of Mechanica

l Engineering and Materials Science.

He moved to the Department of Materials Science and

Engineering at the University of Tennessee (UT) in 1998,

where he served he as Chancellor's Professor and McKamey

Professor of Engineering. While at UT, he also held a Joint

Faculty Appointment at the Oak Ridge National Laboratory

(ORNL), was Head of the UT Materials Science and

Engineering Department, and served as the Director of the

UT/ORNL

Joint Institute for Advanced Materials

. He joined

the faculty of Texas A&M in January 2017.

Dr. Pharr received ASM International’s Bradley Stoughton

Award for Young Teachers of Metallurgy in 1985. His honors

also include the Amoco Award for Superior Teaching at Rice

University (1994), a Humboldt Senior Scientist Award (2007),

the Materials Research Society's inaugural Innovation in

Materials Characterization Award (2010), and the University of

Tennessee Macebearer Award (2015). He is a member of the

National Academy of Engineering (2014) and a Fellow of ASM

International (1995), the Materials Research Society (2012), and

TMS (2016). Dr. Pharr has been an Associate Editor of the

Journal of the American Ceramic Society

since 1990 and

Principal Editor of the

Journal of Materials Research

since

2012. He is an author or co-author of more than 200 scientic

publications, including four book chapters. His research

focuses on mechanisms of plasticity and fracture in solids,

especially at small scales.

Measurement of Power Law Creep Parameters by

Nanoindentation

Great progress has been made over the past decade in making

mechanical property measurements at small scales by load-

xxvi

xxvii

and depth-sensing indentation methods, also known as

nanoindentation. The ability to make such measurements

with sharp pyramidal indenters allows for high point-to-point

spatial mapping of properties as well as the characterization

of very thin lms, thin surface layers, and even small particles

or individual phases in complex multiphase microstructures.

Although most nanoindentation testing has been done at

room temperature, recent advances in nanoindentation

testing equipment have expanded the horizons to very

high temperatures, thus paving the way for the small-scale

measurement of parameters characteristic of time-dependent

creep deformation, such as the stress exponent, n, and

the activation energy,

. However, in doing so, serious

experimental difculties are often encountered, and how one

converts the data obtained in nanoindentation tests to the

parameters normally used to characterize uniaxial creep is

not at all straightforward because of the complex, nonuniform

stress state produced during indentation contact.

In this presentation, we report on progress in making

meaningful measurements of power law creep by

nanoindentation based on recent experience

with a new high

temperature nanoindentation system capable of testing at

temperatures up to 1100°C. Special attention is given to the

models and data analysis

procedures needed to convert

nanoindentation load-displacement-time data into the creep

parameters normally measured in uniaxial tension or

compression testing. The models and procedures are

evaluated by comparison to several sets of creep data in which

the material behavior has been probed both by

nanoindentation and by uniaxial testing methods.

AESD Lecture and Reception

5:00pm–7:00pm

Room 411, David L. Lawrence Convention Center

Frank Kreith Energy Award

William M. Worek,

Department of Mechanical and Industrial

Engineering, Texas A&M University—Kingsville, Texas

William M. Worek is Professor of Mechanical

Engineering at Texas A&M University–

Kingsville, TX. He received all three degrees,

B.S., M.S. and Ph.D. from the Illinois Institute

of Technology in 1976, 1977 and 1980.

He spent a majority of his career at the

University of Illinois–Chicago, where he was Department

Head of Mechanical and Industrial Engineering and Director

of the Energy Resources Center.

He has been involved, over the last 35 years, in the

development of desiccant materials for cooling systems

applications, modeling of sorption processes, experimental

testing of desiccant material performance and the use of

desiccant processes in the design of cooling and

dehumidication systems. He holds three patents on sorption

system design improvements and has published extensively in

archival journals and has given numerous lectures on the

subject. Recently he has expanded his research to investigate

the enhancement when nanouids are boiled.

Professor Worek was chair of the American Society of

Mechanical Engineer’s (ASME’s) Solar Energy Division, Vice-

Presiden

t of ASME’s Energy Resources Group and served as a

Member of ASME’s Board of Governors. In addition, he is Fellow

of ASME and ASHRAE and has received Edwin F. Church Medal

from ASME recognizing his accomplishments in engineering

education. In addition, Professor Worek Co-editor of Mark’s

Handbook for Mechanical Engineering, Executive

Editor of

Applied Thermal Engineering

and Editor-in-Chief of

Heat

Transfer – Asian Research

Title: Challenges in Comfort Cooling: Separating Sensible

and Latent Loads—Material Constraints and New

Opportunities

As buildings have become tighter and as Net Zero Energy

Buildings are designed and implemented, the latent cooling

load has increased, and improved performing heating systems

are desired. This presentation will present the status of current

technologies and the efforts to improve performance and the

capacity per unit volume (i.e., minimization of footprint) of

heating and cooling systems. Conventional heating systems

have limited efciencies, many times less than one. Likewise,

thermally-activated cooling/dehumidication systems also have

relatively poor efciencies. This presentation will focus on work

done and new developments in materials and systems that are

showing that performance can be signicantly improved.

Applied Mechanics Koiter Lecture

5:30pm–6:30pm

Room 408, David L. Lawrence Convention Center

Professor M. Taher A. Saif,

Edward William and Jane Marr

Gutgsell Professor at the University of Illinois Urbana–Champaign

Professor M. Taher A. Saif received his B.S.

and M.S. in Civil Engineering from Bangladesh

University of Engineering and Technology and

Washington State University, respectively, in

1984 and 1986. He obtained his Ph.D. in

Theoretical and Applied Mechanics fr

Cornell University in 1993. He worked as a Post Doctoral

Associate in Electrical Engineering and the National

Nanofabrication Facility at Cornell University during 1993–

1997. He joined the Department of Mechanical Science and

Engineering at the University of Illinois at Urbana–Champaign

(UIUC) during 1997. He is currently the Gutgsell Professor in

the department. He is serving as the Associate Head of

Graduate Programs and Research.

Two of Saif's major contributions are: (1) discovery of plastic

strain recovery in nano grained metals and its underlying

mechanism. The nding opens the possibility of developing

self-healing metal components; (2) discovery of mechanical

tension in neurons in vivo, and the link between this tension

and neurotransmission. This latter nding links mechanical

force with memory and learning in animals. His current

research includes tumor micro environment, mechanics of

neurons and cardiac cells, development of biological

machines, and electro-thermo-mechanical behavior of

nanoscale metals and semiconductors.

xxviii

Saif is a Fellow of the American Society of Mechanical

Engineers since 2011. He served as the President of the

Society of Engineering Science during the calendar year 2016.

He was a member of the Scientic Advisory Board, Singapore-

MIT Alliance for Research and Technology during 2010–2012.

He received the Xerox Award for Faculty Research from

University of Illinois at Urbana–Champaign (UIUC) during 2003

and 2006. He was a Willett Faculty Scholar, College of

Engineering, UIUC, during 2003–2009.

Title: Living Machines

The industrial revolution of the 19th century marked the onset

of the era of machines that transformed societies. However, all

of these machines are non-living and they do not have inherent

intelligence. On the other hand, since the discovery of genes,

there is a considerable body of knowledge on engineering

living cells. It is thus appropriate to envision biohybrid

machines that are made from engineered scaffolds and living

cells. These machines have the potential of unprecedented

capabilities, as they would carry the footprints of millions of

years of evolution. These machines may emerge from an

interaction between the living cells and the micro-nano

scaffolds. In this talk, we will present such an elementary

machine, a small scale swimmer, consisting of a soft slender

string and rat cardiomyocytes. The string is made from a soft

polymeric material by lling a microfabricated channel using

capillary draw. Cells are cultured on one region of the string.

These cells interact with the string as well as with each other

and beat in synchrony as a single actuator. This living actuator

bends the string, and a bending wave propa

gates from the

actuator site toward the end, generating sufcient thrust for

swimming. This articial machine thus swims in uids as the

engineered living swimmer. These swimmers might be used in

vivo for autonomous intelligent drug delivery.

Noise Control and Acoustics Division Wine & Cheese

Reception

Sponsored by:

Noise Control and Acoustics Division

5:30pm–7:00pm

Somerset East, Second Floor, The Westin Hotel

Women in Engineering Reception

Sponsored by:

Diversity & Inclusion Strategy

Committee

5:30pm–7:00 pm

Crawford East & West, Third Floor, The Westin Hotel

The reception provides a focal point at the conference for a

gathering of women from the wide range of ASME activity for

networking and a bit of casual relaxation at the end of a

conference day. The event is open to all ASME women

engineers and engineering students.

Materials Division Reception

Sponsored by:

Materials Division

6:00pm–8:00pm

Room 409, David L. Lawrence Convention Center

Fluids Engineering Division Reception

Sponsored by:

Fluids Engineering Executive

Committee

6:30pm–8:30pm

Pennsylvania West, Second Floor, The Westin Hotel

Applied Mechanics Division Honors & Awards

Banquet

Sponsored by:

Applied Mechanics Division

7:00pm–10:00pm

Westmoreland Central & East,

Second Floor, The Westin Hotel

Tickets: $88

The evening’s events will include honoring and presenting the

following AMD awards to:

Thomas J.R. Hughes Young Investigator Award: Liping Liu

Ted Belytschko Applied Mechanics Award: Tayfun Ersin

Tezduyar

Thomas K. Caughey Dynamics Award: Firdaus E. Udwadia

Daniel C. Drucker Medal: David M. Barnett

Warner T. Koiter Medal: M. Taher A. Saif

Timoshenko Medal: Ares J. Rosakis

Journal of Applied Mechanics Best Paper Award: Charles

Wojnar

Lloyd H. Donnell Applied Mechanics Reviews Paper Award:

Tevis D. B. Jacobs and Ashlie Martini

WEDNESDAY, NOVEMBER 14

Plenary Presentation

8:00am–8:45am

(breakfast served from 7:30am to 8:00am)

Ballroom A, David L. Lawrence Convention Center

Mark Hindsbo

Vice President and General Manager, Design Business Unit,

ANSYS

Presentation Title: Innovation in Engineering

Democratization of technology, from the printing press to the

graphical user interface of the PC, has driven profound

changes to society and innovation. Many of these innovations

were driven by engineers, and now engineering technologies

themselves are being democratized. Powerful tools such as

simulation on-demand manufacturing, for decades the domain

of highly specialized experts, are becoming accessible to all.

xxix

Industry veteran Mark Hindsbo will discuss how this new

paradigm is reshaping engineering, from the classroom to the

workplace

Presenter Biography: Mark Hindsbo is the

Vice President and General Manager of the

Design Business Unit at ANSYS, on a mission

to deliver “simulation for every engineer

and every product.” He has a broad set of

business and technical experiences across

sales, marketing, business strategy, software development,

and physics. Mark originally joined ANSYS as the Vice

President of Marketing in June 2015. Prior to ANSYS, he was

most recently the Sr. Vice President of Customer Success at

Parallels. He spent over 10 years at Microsoft in roles ranging

from General Manager in the Server and Tools business group,

to Vice President of the Developer business in the US. Prior to

this, he was at The Boston Consulting Group, co-founded a

digital agency, and did scientic computing at Novo Nor

disk.

He holds a Master of Science from the Technical University of

Denmark and has done nuclear research at CERN.

NSF-CMMI Overview and Outreach Panel

8:00am–9:45am

Room 411, David L. Lawrence Convention Center

In the rst part of this panel, an overview of the Civil,

Mechanical and Manufacturing Innovation (CMMI) division will

be provided with emphasis on recent changes in organizational

structure as well as funding opportunities, e.g., the new no-

deadline rule. Relevant core programs from the Advanced

Manufacturing Cluster, the Mechanics & Engineering Materials

Cluster, and the Resilient and Sustainable Infrastructures

Cluster will also be highlighted. In the second part of the panel,

the oor will then be opened to participants to address

program directors representing these clusters.

2018 IMECE Feedback Session

10:00am–11:00am

Room 408, David L. Lawrence Convention Center

NSF One-on One Meetings

10:00am–5:30pm

NSF one-on-one meeting are arranged by appointment. For

schedule changes and cancellations, please go to the Meeting

Information desk on the third oor of the David L. Lawrence

Convention Center.

NSF Proposal Development Workshop

10:15am–12:15pm

Room 411, David L. Lawrence Convention Center

In this workshop, the fundamentals of successful grant

proposal writing for the National Science Foundation (NSF) will

be covered. Participants will learn about key topics, including

the components of a successful proposal and nding the right

home for the research. Critical aspects of the merit review

process, funding proles, and NSF programs, solicitations, and

other opportunities will be presented. This workshop is geared

toward early career investigators at U.S. institutions seeking to

understand the NSF merit review process, but the information

provided will be valuable to principal investigators in any stage

of their career seeking to learn more about proposal writing

and NSF funding opportunities.

Robert Henry Thurston Lecture

11:00am–12:00pm

Room 410, David L. Lawrence Convention Center

Title: Dynamic Behavior of Materials at High-Strain Rates

and High-Pressures

Thurston Lecture Award to Guruswami (Ravi) Ravichandran for

pioneering contributions to dynamic behavior of materials and

development of novel experimental methods.

Dr. Guruswami Ravichandran,

John E. Goode, Jr., Professor

of Aerospace and Mechanical Engineering, Division of

Engineering and Applied Science California Institute of

Technology

Guruswami (Ravi) Ravichandran is the

John E. Goode, Jr., Professor of Aerospace

and Mechanical Engineering and the Otis

Booth Leadership Chair of the Division of

Engineering and Applied Science at the

California Institute of Technology. He received

his B.E. (Honors) in Mechanical Engineering from the University

of Madras and his Sc.M. in Engineering and Applied

Mathematics and Ph.D. in Engineering (Solid Mechanics and

Structures) fr

om Brown University. He has held visiting scholar

appointments at Ecole Polytechnique, France (CNRS Senior

Scientist), Tokyo Institute of Technology (Chair in International

Cooperation), and Indian Institute of Science (Aditya Birla

Chair). He is a member of the National Academy of

Engineering, Academia Europea, and European Academy of

Sciences and Arts. He is a Fellow of the American Society of

chanical Engineers (ASME), Society for Experimental

Mechanics (SEM), and American Academy of Mechanics

(AAM). He was named Chevalier de l'ordre des Palmes

Academiques by the Republic of France. His awards include

A.C. Eringen Medal from the Society of Engineering Science,

Warner T. Koiter Medal from ASME, and William M. Murray

Lecture Award from SEM. His research interests include

mechanics of materials (deformation, damage, and failure),

dynamic behavior, wave propagation, composites, active

materials, micro-/nanomechanics, biomaterials and cell

mechanics, and experimental methods.

Title: Dynamic Behavior of Materials at High-Strain R

and High Pressures

Impact, blast, and other dynamic loading events are of

signicance in numerous engineering applications ranging from

aerospace to automotive to defense to security to space.

At the heart of transient loading events are the propagation of

stress/shock waves, which can cause signicant deformation

and catastrophic damage and failure. This lecture will focus

on the dynamic behavior of materials, in particular, their high-

strain rate and high-pressure properties. Experimental methods

based on the split Hopkinson (Kolsky) compression bar and the

plate impact technique are reviewed. These experimental

methods have been used to investigate the dynamic material

behavior under extreme conditions, strain rates ~1 million/s,

and pressures ~100 GPa. Studies on the constitutive behavior

of ductile metals using the shear-compression specimen are

discussed. In situ temperature measurements using high-

speed infrared thermography are used to determine the

fraction of plastic work converted to heat. A plate impact

technique based on the Mach lens concept to achieve high

pressures is illustrated. For a given impact velocity, this

technique can help increase the range of pressures for

determining the equation of state for materials. Shock wave

experiments in heterogeneous materials illustrating their ability

to mitigate damage through dispersion are presented. Material

parameters controlling the rise time of the shock and the

effective viscosity are identied. Theoretical analysis and

numerical simulations are used to gain insights into shock

wave propagation in heterogeneous composite materials.

NSF-CBET Program Overview and Initiatives

1:30pm–3:15pm

Room 411, David L. Lawrence Convention Center

In this event, an overview of the Chemical, Bioengineering,

Environmental, and Transport Systems (CBET) Division

will be provided with emphasis on programs and funding

opportunities. The oor will then be opened to participants

to ask questions.

NSF Student Competition (Posters Only)

Hall B, David L. Lawrence Convention Center

Poster Setup 10:00am–11:45am

General Viewing/Judging 11:45am–2:30pm

Awards 2:30pm–3:00pm

Virtual Podium (Posters Only)

Poster Setup 10:00am–11:45am

General Viewing 11:45am–2:30pm

2019 IMECE Track Organizers and Co-Organizers

Meeting

3:00pm–4:00pm

Room 409, David L. Lawrence Convention Center

IMECE Volunteer and Student Recognition Reception

5:30pm–7:00pm

Westmoreland Central,

Second Floor, The Westin Hotel

Aerospace Division Reception

Sponsored by:

Aerospace Division

5:45pm–7:15pm

Pennsylvania West, Second Floor, The Westin Hotel

THURSDAY, NOVEMBER 15

Closing Plenary Lunch

12:40pm–2:00pm

(lunch served from 12:40pm to 1:10pm)

Ballroom A, David L. Lawrence Convention Center

Vijay Kumar

Nemirovsky Family Dean of Penn Engineering, University of

Pennsylvania

Presentation Title: AI, Robotics, Automation, and the Future

of Work

We are living in a world where exponential growth in

computing, communication, and storage are driving a new

irrational exuberance in technology. The graduating engineers

in 2018 will see computers that are six orders of magnitude

faster than when they were born. Clearly no exponential can

be forever! But there is no doubt that this growth is leading

to automation, which is already having a transformation

effect on our society. What does this mean for the future of

mechanical engineering and related disciplines? This talk will

debate the basis for the irrational exuberance, especially in

the area of autonomous drones and self-driving cars, and

opportunities for engineers and engineering education.

Presenter Biography: Vijay Kumar is the

Nemirovsky Family Dean of Penn Engineering

with appointments in the Departments of

Mechanical Engineering and Applied

Mechanics, Computer and Information

Science, and Electrical and Systems

Engineering at the University of Pennsylvania. Since 1987,

he has served Penn Engineering in many capacities, including

Deputy Dean for Research, Deputy Dean for Education,

Chairman of the Department of Mechanical Engineering and

Applied Mechanics, and Director of the GRASP Laboratory, a

multidisciplinary robotics and perception laboratory. Dr. Kumar

has served as the assistant di

rector of robotics and cyber

physical systems at the White House Ofce of Science and

Technology Policy (2012–2013). He received his Bachelor of

Technology degree from the Indian Institute of Technology,

Kanpur and his Ph.D. from The Ohio State University in 1987.

Dr. Kumar maintains an active research portfolio with interests

in robotics, specically multi-robot systems, and micro aerial

vehicles. He is a Fellow of the American Society of Mechanical

Engineers (2003), a Fellow of th

nstitute of Electrical and

Electronic Engineers (2005), and a member of the National

Academy of Engineering (2013). Dr. Kumar is also the recipient

of the 1991 National Science Foundation Presidential Young

Investigator award, the 1996 Lindback Award for Distinguished

xxx

Teaching (University of Pennsylvania), the 1997 Freudenstein

Award for signicant accomplishments in mechanisms and

robotics, the 2012 ASME Mechanisms and Robotics Award,

the 2012 IEEE Robotics and Automation Society Distinguished

Service Award, a 2012 World Technology Network Award, a

2014 Engelberger Robotics Award, and the 2017 IEEE

Robotics and Automation Society George Saridis Leadership

Award in Robotics and Automation.

HONORING SYMPOSIA

MONDAY, NOVEMBER 12 9:45am–11:30am;

1:45pm–3:30pm; 3:45pm–5:30pm, Room 324

David L. Lawrence Convention Center

Topic 10-60 Symposium in Honor of Prof. Frank Kreith

This Symposium is organized in honor and memory of the late

Professor Frank Krieth, NAE, ASME Honorary Member, ASME

Medal and to celebrate his life, legacy, and the many years of

service and contributions in heat transfer, solar energy,

alternative energy, and sustainability, which have bridged

research in mechanical engineering with applications in most

other engineering disciplines.

HONORING SYMPOSIA

WEDNESDAY, NOVEMBER 14

1:45pm–5:30pm, Room 326

David L. Lawrence Convention Center

Topic 9-8 Kirti (Karman) Ghia Celebration of Life

Symposium

Over the past ve decades, Professor Kirti (Karman) Ghia

made signicant contributions to ASME, AIAA, and APS uids

activities through his research publications, conference and

session organization, and committee administration. Karman

was an effective teacher and researcher of Computational

Fluid Dynamics and has published extensively on a number

of topics. We as a community were saddened to learn of

Karman’s passing on June 13, 2017, following a sudden

illness. This symposium has been organized to celebrate his

life as a distinguished member of our uids community.

HONORING SYMPOSIA

WEDNESDAY, NOVEMBER 14

3:45pm–5:30pm, Room 318

David L. Lawrence Convention Center

Topic 7-9 Pre-College (K-12) STEM, RET – University,

School and Industry Alliance (In Honor of Late Professor

Devdas Pai)

This topic welcomes K-12 outreach efforts by universities and

their industry partners. Modules of research and principles of

engineering presented to the middle and high school students

and teachers will be particularly benecial to the audience.

Similarly, outreach to high school students in the form of

innovative engineering activities on college campuses can also

be presented to the peers attending the sessions. Research

Experiences for Teachers would be appropriate under this

topic.

HONORING SYMPOSIA

THURSDAY, NOVEMBER 15

8:55am–12:35pm, Room 306

David L. Lawrence Convention Center

Topic 3-6 Lightweight Sandwich Composites and Layered

Structures – (In Honor of Prof. Frostig)

This symposium will bring together prominent investigators in

the areas of sandwich structures and multilayered composites

honoring the outstanding contribution of Professor Yehoshua

(Shuki) Frostig from the Technion – Israel Institute of

Technology to applied mechanics in general, and particularly,

to higher-order theories of sandwich structures. Theoretical

models developed by Professor Frostig provide an accurate

analytical tool to characterize the global and local response

of sandwich structures, accounting for realistic deformations

in the core. These contributions have been veried and

universally accepted for the characterization of the response

of sandwich structur

es to both global and local loads. The

colleagues of Professor Frostig will present their original work

pertinent to the areas of his research in acknowledgement of

his original and valuable studies that have a lasting and

prominent effect in our eld of mechanics.

xxxi

NOTES

xxxii

xxxiii

Track 1: Acoustics, Vibration, and Phononics

1-13-1: ACOUSTICS, VIBRATION, AND PHONONICS

PLENARY

Tuesday, November 13, 8:00am–8:45am

Room 305, David L. Lawrence Convention Center

Active Acoustic Metamaterials

(IMECE2018-90090)

Amr Baz

University of Maryland, College Park

Abstract: A class of active acoustic metamaterials (AAMM) is

developed with desirable controlled distributions of effective

dynamic properties or intensity of wave propagation. The

proposed AAMM consists of an array of acoustic cavities

separated by piezoelectric boundaries and arranged to form

acoustic waveguides. The exible piezoelectric boundaries are

controlled to generate desirable acoustic properties or wave

energy distribution along the wave guide in an attempt to

develop acoustic cloaks or non-reciprocal diodes. Robust

control strategies are formulated to achieve the desirable

closed-loop control characteristics of this class of acoustic

metamaterials while rejecting the effect the external wave

pressure disturbances. The time response characteristics of

the AAMM are investigated and presented for various

parameters of the robust controllers in order to demonstrate

the merits of the proposed controllers. Applications of the

proposed work are outlined, ranging from exterior and interior

acoustic cloaks to non-reciprocal switching acoustic

metamaterials.

Bio: Dr. Amr Baz is a Minta Martin Professor of

Mechanical Engineering and the Director of

the Smart Materials and Structures Research

Center at the University of Maryland, College

Park. He holds a B.Sc.’66 from Cairo

University, as well as M.Sc.’70 and Ph.D.’73

from

the University of Wisconsin, Madison. Dr. Baz’s research

interests span the areas of active and passive control of

vibration and noise using smart structures, constrained layer

damping treatments to control sound radiation in structures, as

well as active acoustic metamaterials. Dr. Baz has published

more than 150 archival journal papers, seven book chapters,

and holds nine US patents. He is a Fellow of the American

Society of Mechanical Engineers and a recipient of Egypt’s

Presidential Award & First Class Medal for Best Achievements

in Science and Arts. Dr. Baz received the ASME Adaptive

Structures and Material Systems Prize (2009), the Pi-Tau-

Sigma Purple Cam-Shaft Teaching Award (2009), the S

PIE

Smart Structures Lifetime Achievement Award (2011), the

Poole and Kent Teaching Award (2015), as well as the

Distinguished Scholar award from UMD (2015). He serves on

the editorial boards of the following journals:

Journal of

Vibration and Control, Smart Structures and Systems,

and

Mechanics of Advanced Materials and Structures

. He also

served as Chairman of the ASME National Capital Chapter

(1990–1991), Member of ASME Edwin Church Medal Award

(1993–2002), and Chair and Co-Chair of the SPIE Smart

Structures and Integrated Systems Conference (2002–2003).

Track 2: Advanced Manufacturing

2-1: ADVANCED MANUFACTURING PLENARY

Wednesday, November 14, 9:00am–9:45am

Room 305, David L. Lawrence Convention Center

Manufacturing for X

(IMECE2018-90091)

Jian Cao

Northwestern University

Abstract: The future of manufacturing is envisioned to be a

mixture of customized manufacturing and concentrated

manufacturing. To enable the versatility of manufacturing

processes and to fully integrate design and manufacturing for

system optimization, at the Advanced Manufacturing

Processes Laboratory of Northwestern, research efforts are

rooted in discovering new processes and enhancing the

predictability of manufacturing processes using the ICME

(integrated computational materials engineering) approach.

This talk will provide an overview about those activities and

then focus on selective processes and their fundamentals,

which may include metal-based powder-blown additive

manufacturing, laser processes for surface texturing,

electrospinning, dieless sheet forming, carbon-ber reinforced

composites forming, etc.

Bio: Dr. Jia

n Cao (MIT’95, MIT’92, SJTU’89)

is the Cardiss Collins Professor, Director of

Northwestern Initiative for Manufacturing

Science and Innovation, and an Associate

Vice President for Research (AVPR) at

Northwestern University. She was at the

National Science Foundation as a program director for two

years. Professor Cao is an elected Fellow of ASME, SME, and

the International Academy for Production Engineering (CIRP).

Her major awar

ds include the Charles Russ Richards Memorial

Award (2017) from ASME and Pi Tau Sigma, SME Frederick W.

Taylor Research Medal (2016), ASME Blackall Machine Tool

and Gage Award (2012, 2018), ASME Young Investigator Award

(2006) from ASME Division of Applied Mechanics, and NSF

CAREER Award. Prof. Cao is the Editor-in-Chief of

Journal of

Materials Processing Technology

. She served as President of

the SME North America Manufacturing Research Institute and

Chair of ASME Manufacturing Engineering Division. She is a

recipient of the ASME Dedicated Service Award (2011). As an

AVPR, Prof. Cao fosters the collabora

tion between the physical

sciences and engineering and the other disciplines across and

beyond Northwestern. She is a Board member of mHUB,

Chicago's rst innovation center focused on physical product

development and manufacturing.

TRACK PLENARY

xxxiv

Track 3: Advances in Aerospace Technology

3-20-1: ADVANCES IN AEROSPACETECHNOLOGY

PLENARY I

Wednesday, November 14, 9:00am–9:45am

Room 304, David L. Lawrence Convention Center

Rapid, Physics-Based Reduced Order Modeling of

Nonlinear Aerodynamics

(IMECE2018-90092)

Marilyn Smith

Georgia Institute of Technology

Abstract: The ability to rapidly obtain accurate static and

unsteady loads and moments on complex aerodynamic and

bluff bodies has been one of the major deciencies in next

generation vehicle design, including agile unmanned aerial

systems (UAS) and in tethered loads analysis such as slung,

crane, towed, and parachute congurations. Two reduced-

order models (ROM) that build up complex shape simulation of

quasi-steady loads and moments and then extend the quasi-

steady analysis to unsteady applications have been developed.

Because the ROMs are based on quasi-empirical theory, the

methods are applicable to a wide range of congurations and

rapid enough for use in early design and simulation tools.

Validation with computations, wind tunnel experiments, and

ight tests has demonstrated signicant improvements in

predictions over current approaches for design and analysis.

Demonstrations include control law design for agile UAS and

helicopter slung load handling qualities and stability analysis.

Bio: Dr. Marilyn Smith is a Professor in the

School of Aerospace Engineering at the

Geor

gia Institute of Technology and Associate

Director of the Georgia Tech Vertical Lift

Research Center of Excellence. She previously

worked at Lockheed-Georgia Company

(Lockheed-Martin) and McDonnell-Douglas Helicopters

(Boeing-Mesa). Her research encompasses computational

unsteady aerodynamics and aeroelasticity for complex

congurations. She is currently developing reduced-order

models for nonlinear applications in active ow control, bluff

bodies, and turbulence. She is a Technical Fellow of AHS and

AIAA Fellow. She has twice been a team member for AHS

AgustaWestland International Fellowship Awards and NASA

Group Achievement Awards. She currently serves on the AHS

Board of Directors and AHS Technical Council, as well as

Associate Editor for the

Journal of Fluids and Structures

AIAA

Journal, Journal of the American Helicopter Society

, and the

Aeronautical Journal

Track 3: Advances in Aerospace Technology

3-20-2: ADVANCES IN AEROSPACE TECHNOLOGY

PLENARY II

Wednesday, November 14, 8:00am–8:45am

Room 305, David L. Lawrence Convention Center

On the Flightpath to Adaptive Aerospace Structures:

Articulated Tensegrity

(IMECE2018-90093)

George Lesieutre

Pennsylvania State University

Abstract: Adaptive structures are ying and the eld is

advancing. This talk will trace key developments in adaptive

ight structures technology from circa 1970 to present-day.

Such developments include advances in materials, devices,

control, structural integration, and design—as well as

applications to space and ight vehicles. Articulated tensegrity

space structures provide a recent example. A novel

deployment strategy for cylindrical tensegrity masts starts from

a Class-1 conguration having high packaging efciency and—

hrough a multi-stage deployment process—ending as a

Class-2 tensegrity having higher stiffness. Strut lengths are

xed and articulation is achieved via active cables. Design

optimization revealed packaging efciency and deployed

stiffness exceeding that of existing technology, and an initial

benchtop realization was demonstrated. The talk will also

address the relatively slow process of technology maturation

and adoption, and provide context from the historical

development of aeronautical materials and structures.

Continuing advances promise a bright future. Such advances

include acoustic metamaterials for damping; energy harvesting,

miniature sensors, and low-power electronics and software for

conditioning monitoring and prognosis; and additive 3-D

manufacturing for complex heterogenous structures.

Bio: Dr. George Lesieutre is Associate Dean

for Research and Graduate Studies and

Professor of Aerospace Engineering at Penn

State. He recently completed terms as

Department Head and Director of the Center

for Acoustics and Vibration. He earned a B.S.

in Aeronautics and Astronautics from MIT and a Ph.D. in

Aerospace Engineering from UCLA. Prior to joining Penn State,

he held positions at SPARTA, Rockwell Satellite Systems,

Allison Gas Turbines, and Argonne National Lab. His research

interests include structural dynamics of aerospace systems,

including passive damping, active structures, and energy

harvesting. Dr. Lesieutre served as PI of several major DARPA

programs in adaptive structures and has received ve society

best paper awards. He has advised more than 60 graduate

students and has published more than 300 technical articles

and patents. Dr.

Lesieutre is a Fellow of AIAA, served a term

on the AIAA Board of Directors, and served as General Chair

of the AIAA Science and Technology Forum (SciTech 2015).

An instrument-rated private pilot, he once paddled a canoe

from Montreal to the Gulf of Mexico as part of a historical

reenactment and, more recently, ran a 50-mile ultramarathon.

TRACK PLENARY

xxxv

TRACK PLENARY

xxxvi

Track 4: Biomedical and Biotechnology

Engineering

4-1-1: BIOMEDICAL AND BIOTECHNOLOGY PLENARY I

Wednesday, November 14, 9:00am–9:45am

Room 303, David L. Lawrence Convention Center

Acoustoﬂuidics: Merging Acoustics and Microﬂuidics for

Biomedical Applications

(IMECE2018-90094)

Tony Jun Huang

Duke University

Abstract: The past two decades have witnessed an explosion

in lab-on-a-chip research with applications in biology,

chemistry, and medicine. The continuous fusion of novel

properties of physics into microuidic environments has

enabled the rapid development of this eld. Recently, a new

lab-on-a-chip frontier has emerged, joining acoustics with

microuidics, termed acoustouidics. Here we summarize our

recent progress in this exciting eld and show the depth and

breadth of acoustouidic tools for biomedical applications

through many unique examples, from exosome separation to

cell-cell communications to 3D bioprinting, from circulating

tumor cell isolation and detection to ultra-high-throughput

blood cell separation for therapeutics, and from high-precision

micro-ow cytometry to portable yet powerful uid

manipulation systems. These acoustouidic technologies are

capable of delivering high-precision, high-throughput, and

high-efciency cell/particle/uid manipulation in a simple,

inexpensive, cell-phone-sized device. More importantly, the

acoustic power intensity and frequency used in these

acoustouidic devices are in a similar range as those used in

ultrasonic imaging, which has proven to be extremely safe for

health monitoring during various stages of pregnancy. As a

result, these methods are extremely biocompatible; i.e., cells

and other biospecimen can maintain their natural states

without any adverse effects from the acoustic manipulation

process. With these unique advantages, acoustouidic

technologies meet a crucial need for highly accurate and

amenable disease diagnosis (e.g., early cancer detection and

monitoring of prenatal health) as well as effective therapy (e.g.,

transfusion and immunotherapy).

Bio: Tony Jun Huang is William Bevan

Professor of Mechanical Engineering and

Materials Science at Duke University.

Previously, he was a Professor and The Huck

Distinguished Chair in Bioengineering Science

and Mechanics at The Pennsylvania State

niversity. He received his Ph.D. in Mechanical and Aerospace

Engineering from the University of California, Los Angeles

(UCLA) in 2005. His research interests are in the elds of

acoustouidics, optouidics, and micro/nano systems for

biomedical diagnostics and therapeutics. He has authored/

co-authored over 190 peer-reviewed journal publications in

these elds. His journal articles have been c

ed more than

11,000 times, as documented at Google Scholar (h-index: 59).

He also has 20 patents and invention disclosures. He was

elected a fellow of the following ve professional societies:

the American Institute for Medical and Biological Engineering

(AIMBE), the American Society of Mechanical Engineers (ASME),

the Institute of Electrical and Electronics Engineers (IEEE), the

Institute of Physics (IOP), and the Royal Society of Chemistry

(RSC). Huang’s research has gained international recognition

through numerous prestigious awards and honors, including

a 2010 National Institutes of Health (NIH) Director’s New

Innovator Award; a 2012 Outstanding Young Manufacturing

Engineer Award from the Society for Manufacturing Engineering;

a 2013 American Asthma Foundation (AAF) Scholar Award;

JALA Top T

en Breakthroughs of the Year Award in 2011, 2013,

and 2016; the 2014 IEEE Sensors Council Technical Achievement

Award from the Institute of Electrical and Electronics Engineers

(IEEE); and the 2017 Analytical Chemistry Young Innovator

Award from the American Chemical Society (ACS).

Track 4: Biomedical and Biotechnology

Engineering

4-1-2: BIOMEDICAL AND BIOTECHNOLOGY PLENARY II

Wednesday, November 14, 8:00am–8:45am

Room 304, David L. Lawrence Convention Center

New Directions in Medical Ultrasound

(IMECE2018-90095)

Dr. Mostafa Fatemi

Mayo Clinic

Abstract: Traditional diagnostic ultrasound has evolved from a

simple anatomical imaging tool to a sophisticated technology

that involves quantifying tissue properties and function from

molecular level to the organ level. Many disease processes

cause microscopic changes in tissue that may include

alteration of a tissue’s mechanical properties and, in some

cases, c

hanges in microvasculature network. Ultrasonic

methods for measuring such changes in the human body are

of great interest. The fact that ultrasound is noninvasive and

capable of making measurements at sufcient depths in the

body makes this technology a prime candidate for developing

new diagnostic tools. This talk will cover some new

methodologies in medical ultrasound, including novel methods

in estimating tissue viscoelasticity and new techniques for

imaging microvasculature networks with high denition and

studying their architecture in the targeted tissue.

Bio: Mostafa Fatemi received his Ph.D. in Electrical Engineering

from Purdue University. Currently, he is a Professor of

Biomedical Engineering at the Department of Physiology and

Biomedical Engineering of Mayo Clinic College of Medicine in

ochester, MN. At the Mayo Clinic, he is also a member of the

Mayo Clinic Cancer Center, Cancer Imaging Program, and the

Center for Clinical and Translational Science. In addition, he is

a Professor of the Biomedical Informatics and Computational

Biology graduate program at the University of Minnesota

Rochester. Dr. Fatemi’s current research areas include

ultrasonic methods for tissue viscoelasticity estimation and its

applications in cancer imaging and bladder function evaluation.

His past and current research activities have been funded by

the National Institutes of Health, National Science Foundation,

Department of Defense Medical Research Program, Komen

Breast Cancer Foundation, and Minnesota Partnership

Program. He has published extensively in the eld of medical

ultrasound and holds 11 patents in this eld. Dr. Fatemi has

been awarded Fellow membership by these institutions:

Institute of Electrical and Electronics Engineers (IEEE),

American Institute of Medical and Biological Engineering

(AIMBE), Acoustical Society of America (ASA), and American

Institute of Ultrasound in Medicine (AIUM). He is also a

recipient of the IEEE-UFFC Distinguished Lecturer award for

2016–2017.

Track 5: Design, Reliability, Safety, and Risk

5-19-1 DESIGN, RELIABILITY, SAFETY, AND RISK

PLENARY

Tuesday, November 13, 8:00am–8:45am

Room 304, David L. Lawrence Convention Center

Autonomous Vehicle Safety: Tomorrow’s Rewards versus

Today’s Reality

(IMECE2018-90096)

Roger L. McCarthy

McCarthy Engineering

Abstract: No vehicle technology has caused more excitement,

investment, than potential vehicle “autonomy” (SAE or NHTSA

level 4 & 5). Since the “critical pre-crash event” of ~94% of

U.S. trafc accidents is a “driver critical reason(s),” vehicles

driven by a fast-autonomous agent that does not blink, sleep,

drink, etc., spawn “predictions” of unprecedented safety

impact. Autonomous vehicle potential to revolutionize western

economies is inestimable. The 8% utilization of current

automobiles could increase 10X as autonomous cabs. The vast

tracts of real estate now dedicated to roadside parking,

driveways, and garages could be reclaimed. Unfortunately, the

“hype” surrounding all U.S. self-driving vehicles, even though

they are using somewhat different technologies, signicantly

overstates the current capabilities of the technology, and the

foreseeable improvements in the next few years, to operate on

normal roads interacting with human drivers. This is apart from

having no demonstrated ability in snow or rain. The early

overall crash rates for self-driving prototype vehicles under

ideal conditions has been less than promising, even though

virtually always the fa

ult of the other driver. Because of these

challenges and issues of lability, security, and privacy, the most

signicant active accident prevention will increasingly result

from the deployment of automatic “backup” systems that

monitor the driver, automatically intervene to prevent crashes,

but don’t actively drive. An example is 99% of new vehicles in

the U.S. market by 2022 will have an automatic emergency

braking (AEB) system.

Bio: Dr. Roger L. McCarthy is the founder and

owner of McCarthy Engineering. Dr. McCarthy

serves on the Board of Shui on Land (SOL),

d. (), which is publicly traded

(stock code 0272) on the Hong Kong

Exchange. Dr. McCarthy was formerly

employed by Exponent, Inc. (NASDAQ symbol “EXPO”),

headquartered in Menlo Park, CA. Dr. McCarthy joined

Exponent, then Failure Analysis Associates, Inc., (FaAA) in

1978, and retired in 2009 where, during his 30+-year tenure,

he was variously CEO, Chairman, and Chairman Emeritus.

Dr. McCarthy has published extensively on vehicle accidents,

using large scale vehicle accident databases to address

questions of automotive design. In 2004, Dr. McCarthy was

elected to the U.S. National Academy of Engineering (NAE)

with the citation: “For major contributions to improved vehicle

safety and for methods of quantitative assessment of the

reliability of complex mechanical syst

s.” In 1992, then

President Bush appointed Dr. McCarthy to a two-year term on

the President’s Commission on the National Medal of Science.

Dr. McCarthy holds a Ph.D. from the Massachusetts Institute

of Technology (MIT) in Mechanical Engineering and four other

academic degrees. Dr. McCarthy has investigated some of

the major disasters of the current age, most recently the

Deepwater Horizon Explosion, Fire, and Oil Spill in the Gulf of

Mexico for Secretary of the Interior Salazar. He has appeared

on The History Channel, Myth Busters, Discovery, Modern

Marvels, and the National Geographic Channel.

Track 6: Dynamics, Vibration, and Control

6-1-1 DYNAMICS, VIBRATION, AND CONTROL

PLENARY

Tuesday, November 13, 8:00am – 8:45am

Room 303, David L. Lawrence Convention Center

Complex Modal Decomposition for Traveling Waves and

Nonsynchronous Oscillations

(IMECE2018-90097)

Brian Feeny

Michigan State University

Abstract: Characteristic patterns of nonsynchronous

oscillations and traveling waves can be described in terms

of complex modes. We extract complex modes from data by

using modal decompositions that are generalizations of proper

orthogonal decomposition. These decomposition methods

are based on the availability of sampled sensed quantities

distributed across a structure of interest and may include,

for example, displacements, velocities, and/or accelerations.

An eigenvalue problem produces optimal weighted signal

energy distributions that are interpreted as modes. Basic i

deas of three methods are discussed, as is the use of complex

modes and modal coordinates for quantifying features of

nonsynchronous and traveling-wave motion. The methods are

applied to a variety of systems, including structural wave

propagation and bio-locomotion.

Bio: Brian Feeny is a Professor in

the

Department of Mechanical Engineering at

Michigan State University. He received his

B.S., M.S., and Ph.D. in Mechanics from the

University of Wisconsin—Madison (1984),

the Virginia Polytechnic Institute and State

University (1986), and Cornell University (1990), respectively,

and then held a postdoctoral position at the Institute of

Robotics, ETH in Zurich, Switzerland. He is a Fellow of the

American Society of Mechanical Engineers (ASME), for which

TRACK PLENARY

xxxvii

he has been an Associate Editor for the

Journal of Vibration

and Acoustics

and

Journal of Computational and Nonlinear

Dynamics

, and has served as chair of the ASME Technical

Committee on Vibration and Sound. He is the director of his

department’s student exchange program between MSU and

RWTH Aachen. His research interests are in dynamics and

vibration, with current activities in nonlinear dynamics, modal

decomposition, nonlinear waves, friction dynamics, and system

identication, and with applications to wind turbines, pendulum

vibration absorbers, and bio-locomotion.

Track 7: Engineering Education

7-13-1 ENGINEERING EDUCATION PLENARY

Wednesday, November 14, 9:00am–9:45am

Room 302, David L. Lawrence Convention Center

Lessons and Perspectives on Transformational Engineering

Education: Past, Present, and Future

(IMECE2018-90098)

Harvey Borovetz

University of Pittsburgh

Abstract: This plenary talk is dedicated to Dr. Devdas Mizar

Pai, a longtime contributor to the Engineering Education track

at IMECE whose sudden demise on August 19, 2017 impacted

us in many ways; his transformational vision of engineering

education lives on. Drawing from his life, Dr. Borovetz will paint

the vision for engineering education in the 21st century. The

lack and the need of a Science, Engineering, Technology, and

Mathematics (STEM) workforce has been emphasized more

than ever by the many initiatives undertaken by the National

Science Foundation, such as its STEM Scholarships for

academically talented and nancially disadvantaged students.

There is qui

te a dearth of underrepresented minorities, including

women, in mechanical engineering and other engineering

disciplines. Numerous and diverse outreach programs in K-16

are quintessential in keeping the current generation of students

engaged in our engineering education enterprise. These programs

include student-mentor interaction, student-faculty interaction,

peer learning, living learning communities, shadowing

experiences with engineers in industry, and above all, inclusive

excellence. Besides prog

rams such as Research Experiences

for Undergraduates and Teachers, we need to invest in Young

Scholar Institutes to impact engineering education. The holistic

development of graduates is an important theme to sustain the

STEM workforce in the future. This talk will not only highlight

Dr. Pai’s many valuable contributions to STEM education and

outreach and their impact, but also the lessons for us regarding

inclusive excellence and other strategies to address challenges

and sustain transformational engineering education programs

nationwide.

Bio: Dr. Harvey Borovetz is a distinguished

professor and former chair in the Department

of Bioengineering, Swanson School of

Engineering at the University of Pittsburgh.

He holds several other professorships in

numerous departments in both engineering

and medicine. Dr. Bor

ovetz is a Fellow of the American Institute

or Medical and Biological Engineering, a Fellow of the Council

on Arteriosclerosis, American Heart Association, and Inaugural

Fellow of the Biomedical Engineering Society (BES). He served

on the BES Board of Directors. He led from the front on

numerous cutting-edge research and education initiatives in

engineering education working with colleagues across many

U.S. institutions. Dr. Borovetz served on the Scientic Advisory

Boards of the University of Louisville Speed Scientic School,

the University of Massachusetts, the Departments of

Bioengineering at Bucknell University, the Cleveland Clinic

Foundation, UCLA, Rutgers University, and Pennsylvania State

University. He has also served on numerous NIH and NSF

study sections, as a member of the Literature Selection

Technical Review Committee, National Library of Medicine,

as an ad hoc reviewer on the Scientic Advisory Committee of

the Whitaker Foundation, and as a reviewer for The Whitaker

International Fellows and Scholars Program. Dr. Borovetz's

current

research interests are focused on the design and

clinical utilization of cardiovascular organ replacements for

both adult and pediatric patients. He will share examples of

inclusive excellence from his role as Executive Director of an

NSF Engineering Research Center. His many students in

the

STEM workforce, such as Dr. Mike Lowell, President of

Marquette University, are a testament to his leadership in

engineering education. Dr. Borovetz

’s di

stinguished record in

engineering education includes many laurels, such as 2007

Carnegie Science Center Life Sciences Award and the 2016

Swanson School of Engineering Award for Diversity. He will

springboard his vast experience to guide us in how we can

transform engineering education for the students of the 21st

century.

Track 8: Energy

8-17 ENERGY PLENARY

Tuesday, November 13, 8:00am–8:45am

Room 302, David L. Lawrence Convention Center

Thoughts on the Future of Power Generation: A Low

Carbon Perspective

(IMECE2018-90099)

Ahmed F. Ghoniem

Massachusetts Institute of Technology

Abstract: Increasing environmental concerns related to energy

use are driving systems for electricity generation toward low-

carbon alternatives. This presentation summarizes current

approaches and outlines future developments and research

needs for transitioning towards sustainable electricity

generation. The speaker will present information regarding

renewables and CCS technologies, centralized and

decentralized generation, and advanced energy conversion

systems, and also highlighting the strategic role of forming

future energy engineers in the eld of advanced energy

systems and approaches.

TRACK PLENARY

xxxviii

Bio: Ahmed Ghoniem the Ronald C. Crane

Professor of Mechanical Engineering, Director

of the Center for Energy and Propulsion

Research and the Reacting Gas Dynamics

Laboratory at MIT. He received his B.Sc. and

M.Sc. degree from Cairo University, and Ph.D.

at the University of California, Berkeley. His research covers

computational engineering with application to turbulence and

combustion, multiphase ow and multiscale phenomena,

clean energy technologies with focus on CO

capture,

renewable energy and alternative fuels. His research has

made fundamental contributions to multiscale simulations,

thermochemistry, combustion dynamics, energy systems and

materials chemistry. He supervised more than 100 M.Sc., Ph.D.

and post-doctoral students, many are leaders in academia,

industry and governments; published more than 500 refereed

articles in leading journals and conferences; lectured

extensively around the World; and consulted for the aerospace,

automotive and energy industry. He is fellow of the American

Society of Mechanical Engineer (ASME), the American institute

of Physics (

APS), the Combustion Institute (CI), and associate

fellow of the American Institute of Aeronautics and

Astronautics (AIAA). He received several prestigious awards

including the ASME James Harry Potter Award in

Thermodynamics, the AIAA Propellant and Combustion Award,

the KAUST Investigator Award and the Committed to

“Committed to Caring Professor” at MIT.

Track 9: Fluids

9-17-1: FLUIDS ENGINEERING PLENARY I

Tuesday, November 13, 8:00am–8:45am

Room 301, David L. Lawrence Convention Center

Microﬂuidic Rheometry of Complex Fluids

(IMECE2018-90100)

Gareth H. McKinley

MIT

Abstract: The development and growth of microuidics has

stimulated interest in the behavior of complex liquids in

microscale geometries and provided a rich platform for

rheometric investigations of non-Newtonian material

phenomena at small scales. Microuidic techniques present

the rheologist with new opportunities for measurement of uid

properties and enable the systematic investigation of strong

elastic effects at very high deformation rates without the

complications of uid inertia. In

this presentation, we provide

an overview of the use of microuidic devices to measure bulk

rheology and onset of viscoelastic ow instabilities in both

shear and extensional ows, using a combination of local

velocimetric imaging, mechanical measurements of pressure

drop, and full-eld optical probes of ow-induced

birefringence. Steady and time-dependent ows of a range of

dilute polymer solutions and wormlike micellar uids are

considered. The ability to rapi

dly and precisely fabricate

complex ow geometries also enables us to exploit the

predictions of computational optimization and design, from rst

principles, an optimized shape cross-slot extensional

rheometer (or OSCER) that achieves homogeneous planar

extensional kinematics and large uid st

ins. Local

birefringence measurements along the stagnation streamlines,

combined with bulk measurements of the excess pressure

drop across the device, provide self-consistent estimates of

the extensional viscosity over a wide range of deformation

rates up to 1000 s

–1

. The results are also in close agreement

with numerical simulations based on a nitely extensible

nonlinear elastic (FENE) dumbbell model. As the imposed

extension rate in the OSCER device is increased, the

homogeneous planar elongational ow ultimately becomes

unstable. High-frame rate video-imaging of the biref

ringence

eld is used to construct space-time diagrams of the evolution

in the ow for seven different polymer solutions and to

construct the rst stability diagram for planar extensional ows

in cross-slot devices. The mode of instability is found to

depend on the elasticity number (El = Wi/Re) of the uid, with a

steady symmetry-breaking purely-elastic bifurcation observed

at high El >> 1, and time-dependent three-dimensional inertio-

elastic instabilities dominant for El < 1.

Bio: Gareth H. McKinley is the School of

Engineering Professor of Teaching Innovation

within the Department of Mechanical

Engineering at MIT. He receive

d his B.A. and

M.Eng. from the University of Cambridge and

his Ph.D. (1991) from the Chemical

Engineering Department at MIT. He taught in the Division of

Engineering and Applied Sciences at Harvard from 1991 to

1997 and was an NSF Presidential Faculty Fellow from 1995 to

1997. He won the Annual Award of the British Society of

Rheology in 1995 and the Frenkiel Award from the APS Division

of Fluid Dynamics in 2001. He served as Executive Editor of

the

Journal of Non-Newtonian Fluid Mechanics

from 1999 to

2009 and as Associate Editor of the

Journal of Fluid Mechanics

from 2007 to 2009. He most recently served as the Associate

Department Head for Research of the Mechanical Engineering

Department at MIT from 2008 to 2013. He is also a co-founder

of Cambridge Polymer Group. His research interests include

extensional rheology of complex uids, non-Newtonian uid

dynamic

s, microrheology and microuidics, eld-responsive

uids, super-hydrophobicity, wetting of nanostructured

surfaces, and the development of nanocomposite materials.

He is the author of over 275 technical publications and was

one of the winners of the 2007 Publication Award of the

Society of Rheology. He is a Fellow of the American Physical

Society and President of the U.S. National Committee of

Theoretical and Applied Mechanics (USNC/TAM). He was the

recipient of the 2013 Bingham Medal of the Society of

Rheology and served as President of the Society from 2015 to

2017. Most recently, he won the 2014 Gold Medal of the British

Society of Rheology.

TRACK PLENARY

xxxix

Track 9: Fluids

9-17-2: FLUIDS ENGINEERING PLENARY II

Tuesday, November 13, 9:00am–9:45am

Room 301, David L. Lawrence Convention Center

Interface Actuations for Micro/Nano Fluidics

(IMECE2018-90101)

Sung Kwon Cho

University of Pittsburgh

Abstract: Due to dominant interfacial tensions emerging in

micro/nano scale, controlling and actuating of interfaces are

of critical importance in many micro/nano uidic applications.

On a quest to efcient interfacial actuations, Dr. Cho’s group

has been studying and developing many mechanisms and

methods. In this talk, he will present two major topics on

interface actuations and their applications: (1) microswimmer

propelled by acoustically oscillating micro bubbles and

(2) electrowetting and dielectrowetting for lab-on-a-chip

applications. Micro propulsion is a key element in the micro-

swimmer that can be potentially applied to navigate inside

human and animal bodies. Recently, we have developed a

micro propulsion method where acoustically excited oscillating

bubbles generate streaming ows and propulsion forces. A

variety of propelling mo

tions have been achieved by carefully

designing/fabricating devices and controlling exciting conditions.

For the second topic, he will present a variety of droplet

manipulations using dielectrowetting that highly localizes liquid

dielectrophoresis to the three-phase contact line. In addition,

he will also present how to mitigate bio-fouling (biomolecule

sorption), which is one of the critical hurdles against practical

applications of droplet-based lab-on-a-chip systems. Detailed

results and discussions on the above topics will be presented.

Bio: Sung Kwon Cho earned B.S., M.S., and

Ph.D. from Mechanical Engineering at Seoul

National University in 1990, 1992 and 1998,

respectively. After postdoctoral experience

at the University of California, Los Angeles

(UCLA), he joined the faculty of the

Department of Mechanical Engineering and Materials Science

at the University of Pittsburgh in Fall 2003 as an Assistant

Professor and then was promoted to Associate Professor with

tenure in 2009 and to Professor in 2018. Since Dr.

Cho

established the “Microuidic Systems Lab” in 2003, my primary

research focus is on “micro bubbles, micro drops, and micro

interfaces as uidic actuators,” with an emphasis on the

development of a variety of micro/bio uidic transducers and

integrated systems that enable us to efciently handle a wide

range of micro/bio substances. The nature of my research is

highly interdisciplinary, encompassing uid mechanics,

micro/nano manufacturing, interfacial science, electrical

engineering, and bioengineering. In essence, my research

activities heavily rely on micro/nano fabrication or MEMS

(microelectromechanical system) technology, leveraging

development and usage of the micro/nano facilities at the

University of Pittsburgh. Overall, Dr. Cho has published over

50 archival journal articles and book chapters in micro/bio

uidics and MEMS areas mostly with nancial supports from

federal grants (NSF, DARPA, NIH, DOD, DOE, HSARPA, and

AHA) and the University of Pittsburgh.

Track 10: Heat Transfer

10-64-1 HEAT TRANSFER AND THERMAL

ENGINEERING PLENARY I

Tuesday, November 13, 8:00am–8:45am

Room 306, David L. Lawrence Convention Center

Multiscale Modeling of Nanoparticle Transport:

Applications to Targeted Drug

(IMECE2018-90102)

Portnovo S. Ayyaswamy

University of Pennsylvania

Abstract: This talk will describe methods based on equilibrium

and non-equilibrium statistical mechanics to construct

numerical procedures that enable predictive models in cell

biology and bioengineering. The models described here have

particular relevance to targeted drug delivery employing

nano-sized carriers. The nano particle shape considered here is

either spherical or elliptical. Predictions from the simulations of

the models are validated by comparison with experimental data

where available.

Bio: Professor Portonovo S. Ayyaswamy is

one of the most distinguished and

internationally recognized researcher and

educator today in the elds of Heat Transfer

and Thermal Science & Engineering. He is

recognized not only as an outstanding scholar

and educator but also as an immensely impactful contributor to

major developments in industry. He has made many origi

nal

and seminal contributions to the science and art of heat and

mass transfer, particularly in multi-phase ows, phase-change

heat and mass transfer, droplets and bubbles dynamics,

ionized arc-plasma transport, bio heat and mass transfer,

and nano-carrier thermal motion and transport. His very long

list of distinguished achievements in heat transfer research,

education, and professional and industry service are

acknowledged internationally. Dr. Ayyaswamy, Asa Whitney

ofessor of Dynamical Engineering, University of

Pennsylvania, received his Ph.D. (1971) from UCLA, M.E.

(1967), and M.S. (1965) from Columbia University, and B.E.

(1962) from University of Mysore. He has co-authored the

highly regarded and extensively subscribed monograph:

Transport Phenomena with Drops and Bubbles

(Springer,

1997). He has also contributed a signicant chapter, entitled

“Introduction to Biouid Mechanics,” in the book,

Fluid

Mechanics

, by P.K. Kundu and I.M. Cohen (Academic Press,

MA, 2007). He has served as an expert on numerous NASA,

NIH, NSF, NRC, and NAE. He is a Fellow of ASME and

currently the Editor (2016–2021) of the ASME

Journal of Heat

Transfer

. Dr. Ayyaswamy has been the recipient of the AIAA

Aerospace Professional of the Year award (1997), ASME Heat

Transfer Memorial Award – Science (2001), ASME Worcester

Reed Warner Medal (2007), 75th Anniversary Medal (2013) of

the ASME Heat Transfer Division, and the ASME-AIChE Max

Jakob Memorial Award (2015), among others. At the University

TRACK PLENARY

xli

of Pennsylvania, he has received the Reid Warren Award and

the Lindback Award for Distinguished Teaching. In 2014, he

was celebrated with a Festschrift on his 70th birthday (P.

Ayyaswamy’s 70th Birthday Tribute: Special Sessions on I –

Interfacial Fluid Dynamics, and II – Devices and Modeling

Nanoparticles) at the 7th World Congress of Biomechanics,

Boston, MA. He was also elected (2014) to the governing board

of the American Society for Gravitational and Space Research.

Track 10: Heat Transfer

10-64-2 HEAT TRANSFER AND THERMAL

ENGINEERING PLENARY II

Tuesday, November 13, 9:00am–9:45am

Room 306, David L. Lawrence Convention Center

Aerospace Thermal Management: Challenges and

Opportunities

(IMECE2018-90103)

Andrew Bicos

Ofce of Congressman Tom Reed (NY-23)

Abstract: This talk is focused on providing an overview of

thermal technology solutions for broader aerospace

applications, which include hypersonic vehicle, commercial

and military aircrafts, satellite and spacecraft systems, along

with emerging areas of hybrid propulsion and more electric

aircraft architecture. The anticipated thermal and power growth

in aerospace systems in coming years is driving the need for

ever efcient, reliable, and affordable heat dissipation, storage,

and waste heat to power conversion technology, capable of

managing thermal energy at the multi MW level. There is need

for an interdisciplinary and multifunctional re

search and

product development approach to meet 21st century space

and aviation challenges. Recent advances in materials and

advanced fabrication methods (including additive

manufacturing) have opened up signicant design

improvement possibilities for development of “next generation”

high performance, integrated thermal management solutions.

Applications of this approach are illustrated by selective

examples, such as structurally integrated thermal management

for hypersonic vehicle, air/liquid cooling, and thermal energy

storage devices for pulsed power systems and use of novel

lightweight 3D printed materials in aircraft, satellite, and

spacecraft systems. Finally, the need for synergetic

collaboration among academia, industry, and government

research organizations is emphasized for rapid development

of economically viable, next generation thermal technologies

for aerospace applications.

Bio: Dr. Bicos is on leave from The Boeing

Company. His previous assignment was in

Boeing Research & Technol

ogy, where he

was director of the performance technology

strategy, where his responsibilities included

developing the enterprise strategy for all

ight sciences R&D at Boeing and managing the portfolio

of activities that develop and transition technologies and

processes into Boeing’s wide array of products. He was also

the chief engineer for the aeromechanics technology team,

where he ensured that the technologies transitioned to the

products are technically sound and meet customer

requirements. Prior to this assignment, he was the director for

enterprise manufacturing technology strategy and before that

for the structures and materials technology strategy. Dr. Bicos

joined the company in 1987. His prior assignments include

project leadership positions within the Boei

Satellite Systems

engineering design and analysis directorate, Delta rocket

program mission assurance, and two years in supply chain

management. Prior to the Boeing and McDonnell Douglas

merger in 1997, he was senior manager responsible for

advanced structures R&D for the McDonnell Douglas Phantom

Works organization in which he specialized in composites and

adaptive/multifunctional structures technology. Dr. Bicos has

published more than 20 technical papers and articles on

innovative composites, adaptive structures, and vibration

reduction technologies. He has two patents, one for composite

damage detection and the other for a structural damping

device. He has received a B.S. in engineering and a MBA from

UCLA, as well as a M.S. and Ph.D. in aeronautics and

astronautics from Stanford University. He has held positions on

the AIAA Structural Dynamics and ASME Adaptive Structures

and Material Systems technical committees and is a former

chairman of the ASME Aerospace Division. He is an Associate

Fellow of the AIAA and the immediate past chair of the ASME

Industry Advisory Board.

Track 11: Materials Genetics to Structures

11-23-1 MATERIALS: GENETICS TO STRUCTURES

PLENARY I

Tuesday, November 13, 8:00am–8:45am

Room 307, David L. Lawrence Convention

Center

Biological Materials and Mechanics: Challenges and

Opportunities

(IMECE2018-90108)

Marc A. Meyers

UC San Diego

Abstract: Biological materials science is a new and vibrant eld

of materials science and engineering. Although biologists have

been studying organisms for centuries, it is only recently that

materials scientists have started to use their fantastic

experimental, computational, and analytical arsenal of tools

to reveal new features. This talk presents the Arzt eptahedron,

which denes seven unique and dening characteristics of

biological materials. The plethora of different structures and

mechanical properties of biological materials is systematized

through a new paradigm: eight structural design elements,

which are motifs appearing on different species and scales,

and which enable analytical treatment and lead to enhanced

understanding. We have applied th

is approach to approximately

twenty different organisms. We illustrate our approach by

applying this knowledge to the toucan beak, rabbit and pig

skin, sh scales, pangolin scales, and feathers. Current efforts

at bioinspired materials and designs, including feathers, whale

baleen, seahorse tail, and gar scales, are also discussed.

Bio: Marc A. Meyers is Distinguished

Professor of Materials Science at the

University of California, San Diego. His

research eld is the mechanical behavior of

materials, focused on dynamic behavior of

materials, nanocrystalline materials, and

biological materials. In the dynamic behavior of materials,

the unifying theme is the high rate at which events occur.

He initiated this work in 1972 and has dedicated 43 years

to unifying it by emphasizing the physical and chemical

phenomena. This has been dened in his Dynamic Behavior

of Materials (1994). His honors include Fellow, TMS, APS,

and ASM, as well as awards in the U.S. (ASM Charles Barrett,

Albert White, and Albert Sauveur Awards, TMS Mehl, Morris

Cohen and Educator (Weertman) Awards, Acta Materialia

Materials and Society Award, SMD/TMS Distinguished

Engineer/Scientist and Service Awards, APS Shock

Compression Science Award); Europe (Humboldt, DGM Heyn,

and DYMAT Rinehart Awards); and China (Lee Hsung Award).

He was co-founder of the Center for Explosives Technology

Research, New Mexico Tech, and of the EXPLOMET

conference series (1980–2000). He is also the co-author of

Mechanical Metallurgy, Mechanical Behavior of Materials,

and

Biological Materials Science

, and approximately 400 papers.

He is corresponding member of the Brazilian Academy of

Sciences and of the Institut Grand Ducal (Luxembourg). In

2014, he completed the kayak descent of the River of Doubt

in honor of the 1914 Amazon expedition co-led by Theodore

Roo

sevelt and the Brazilian explorer Col. Rondon. He also

writes ction and is the author of

Mayan Mars, Chechnya

Jihad, D’amour et d’acier,

and

Yanomami

Track 11: Materials Genetics to Structures

11-23-2 MATERIALS: GENETICS TO STRUCTURES

PLENARY II

Tuesday, November 13, 9:00am–9:45am

Room 307, David L. Lawrence Convention Center

The Future of Aerospace Materials: Challenges and

Opportunities

(IMECE2018-90109)

Richard A. Vaia

Air Force Research Laboratory

Abstract: Over a hundred years ago, the pioneers of aviation

took ight in no small part due to material innovations ranging

from novel casting of aluminum engine blocks to judicious

selection of natural materials. Unquestionably, the future of

aerospace will look as different from today as the Wright Flyer

and Curtiss June Bug differ from UAVs and F35s. However, the

role of materials will remain unchanged—they will be the

crucial ingredient that enables these future machines to push

the performance envelope. Using examples from current

research within the Air Force R

esearch Laboratory, the tools

necessary to hasten the development of these vital materials

will be discussed. These range from embracing technologies

from the digital revolution to accelerate materials development,

reduce qualication cost, and provide agile manufacturing

methods, to harvesting the potential at the intersection of

nano-based metamaterials, smart surfaces, nanostructured

devices, and biotechnology to enable autonomous systems

that can execute complex tasks in evolving environments.

Bio: Richard A. Vaia is the Technical Director

of the Functional Materials Division at the

U.S. Air Forc

e Research Laboratory (AFRL).

The 200+ scientists and engineers he leads

deliver materials and processing solutions

to revolutionize AF capabilities in Survivability,

Directed Energy, Reconnaissance, and Human Performance.

Additionally, he has published more than 200 articles on

nanomaterials, with honors including the AF McLucas

Award for Basic Research, ACS Doolittle Award, Air Force

Outstanding Scientist, Air Force Ofce of Scientic Research

Star Teams, and Fellow of the Materials Research Society,

American Physical Society, American Chemical Society,

NextFlex, and the Air Force Research Laboratory.

Track 12: Mechanics of Solids, Structures and

Fluids

12-40-1 MECHANICS OF SOLIDS, STRUCTURES AND

FLUIDS PLENARY I

Tuesday, November 13, 8:00am–8:45am

Room 308, David L. Lawrence Convention Center

The Isogeometric Approach to Analysis

(IMECE2018-90104)

Thomas J.R. Hughes, Jr

UT Austin

Abstract: The vision of Isogeometric Analysis was rst

presented in a paper published October 1, 2005. Since then it

has become a focus of research within both the elds of nite

element analysis (FEA) and computer aided design (CAD) and

is rapidly becoming a mainstream analysis methodology and a

new paradigm for geometric design. The key concept utilized

in the technical approach is the development of a new foundation

for FEA, based on rich geometric descr

iptions originating in CAD,

resulting in a single geometric model that serves as a basis for

both design and analysis. In this overview, the talk will describe

some areas in which progress has been made in developing

improved methodologies to efciently solve problems that have

been at the very least difcult, if not impossible

, within

traditional FEA. It will also describe current areas of intense

activity and areas where problems remain open, representing

both challenges and opportunities for future research.

Bio: Thomas J.R. Hughes holds a B.E. and

M.E. in Mechanical Engineering from Pratt

Institute and M.S. in Mathematics and Ph.D.

in Engineering Science from the University of

California at Berkeley. He taught at Berkeley,

Caltech, and Stanford before joining the

University of Texas at Austin. At Stanford, he served as

Chairman of the Division of Applied Mechanics, Chairman of

the Department of Mechanical Engineering, and Chairman of

the Division of Mechanics and Computation, and occupied the

Crary Chair of Engineering. At Austin, he is Professor of

TRACK PLENARY

xlii

TRACK PLENARY

xliii

Aerospace Engineering and Engineering Mechanics and holds

the Computational and Applied Mathematics Chair III. He is a

Fellow of the American Academy of Mechanics, ASME, AIAA,

ASCE, AAAS; Founder, Fellow, and past President of USACM

and IACM; past Chairman of the Applied Mechanics Division of

ASME; past Chairman of the US National Committee on

Theoretical and Applied Mechanics; and co-editor of the

international journal

Computer Methods in Applied Mechanics

and Engineering

. Dr. Hughes is one of the most widely cited

authors in Engineering Science. He has received the Huber

Prize and Von Karman Medal from ASCE; the Timoshenko,

Worcester Reed Warner, and Melville Medals from ASME; the

Von Neumann Medal from USACM; the Gauss-Newton Medal

from IACM; and many other national and international awards.

He is a member of the U.S. National Academy of Sciences; the

U.S. National Academy of Engineering; the American Academy

of Arts and Sciences; the Academy of Medicine, Engineering

and Science of Texas; and a Foreign Member of the Royal

Society of London, the Austrian Academy of Sciences, and the

Istituto Lombardo Accademia di Scienze e Lettere. Dr. Hughes

has received honorary doctorates from the universit

ies of Louvain,

Pavia, Padua, Trondheim, Northwestern, and A Coruña.

Track 12: Mechanics of Solids, Structures and

Fluids

12-40-2 MECHANICS OF SOLIDS, STRUCTURES AND

FLUIDS PLENARY II

Tuesday, November 13, 9:00am–9:45am

Room 308, David L. Lawrence Convention Center

How to Design Quasibrittle and Lamellar Biomimetic

Structures for Failure Probability <10-6: Gauss-Weibull and

Fishnet Statistics

(IMECE2018-90105)

Zdenek P. Bazant

Northwestern University

Abstract: Similar to nacre (or mother-of-pearl), imbricated

lamellar structures are widely found in natural and man-made

materials, and are of interest for biomimetics. These staggered

imbricated structures are known to be rather insensitive to

defects and have strength and fracture toughness an order-of-

magnitude higher than their constituents. Their deterministic

behavior has been intensely studied, while statistical studies

have been rare and no theoretical basis for the probability

density function (pdf) of strength has yet been formulated. This

paper presents a theoretical and numerical study of the pdf of

strength and of the corresponding statistical size effect

. After

reasonable simplications of the shear bonds, a lamellar axially

loaded lamellar shell is statistically modelled as a shnet pulled

diagonally. A FE model is developed and used in many millions

of Monte Carlo simulations of strength. An analytical model for

failure probability of the shnet is developed and matched to

the computed statistical histograms of strength of shnet

structures of various sizes. Based on fresh results at

Northwestern, post-peak progressive softening of shnet links

is considered and its effect on the strength probability

distribution is analyzed on the basis of order statistics. It

appears that, with increasing size, the pdf of strength slowly

transits from Gaussian to Weilbull distribution but the transition

is different from that previously obtained at Northwestern for

quasibrittle materials of random heterogeneous mesostructure.

An important practical implication is that the staggered lamellar

architecture not only enhances the mean strength but also

contributes an additional major stre

ngth incre

ase at the failure

probability level of 10-6, which is what matters for structural

safety.

Bio: Born and educated in Prague (Ph.D.

1963), Zdenek P. Bazant joined Northwestern

in 1969, where he has been W.P. Murphy

Professor since 1990 and, simultaneously,

McCormick Institute Professor since 2002,

and Director of Center for Geomaterials

(1981–1987). He was inducted to NAS, NAE, American

Academy of Arts and Sciences, and Royal Society of London;

to the academies of Italy, Austria, Spain, Czech Republic,

Greece and Lombardy, and Academia Europaea. He is an

honorary Member of ASCE, ASME, ACI, and RILEM. He

received the Austrian Cross of Honor for Science and Art I.

Class; seven honorary doctorat

es (Prague, Karlsruhe,

Colorado, Milan, Lyon, Vienna, Ohio State); ASME Medal,

ASME Timoshenko, Nadai and Warner Medals; ASCE von

Karman, Newmark, Biot, Mindlin and Croes Medals, and

Lifetime A

chievement Award; SES Prager Medal; RILEM

L'Hermite Medal; Exner Medal (Austria); Torroja Medal (Madrid);

Solin and Bazant, Sr. Medals (Prague); etc. H

e authored six

books: Scaling of Structural Strength, Inelastic Analysis,

Fracture and Size Effect, Stability of Structures, Concrete at

High Temperatures, and Concrete Creep. H-index: 115,

citations: 58,000 (on Google, June 2017, incl. self-cit.),

i10 index: 566. In 2015, ASCE established the ZP Bazant

Medal for Failure and Damage Prevention. He is one of the

original top 100 ISI Highly Cited Scientists in Enginee

ring.

(www.ISIhighlycited.com).

Track 13: Micro- and Nano-Systems

Engineering and Packaging

13-2-1 MICRO- AND NANO-SYSTEMS ENGINEERING

AND PACKAGING PLENARY I

Wednesday, November 14, 9:00am–9:45am

Room 301, David L. Lawrence Convention Center

The Role of Arrayed Sensor Systems-on-Chip in Next-

Neneration MEMS Inertial Sensing

(IMECE2018-90106)

Gary K. Fedder

Carnegie Mellon University

Abstract: Two recent projects illustrate the continued push for

technological innovation to improve inertial sensor

performance, generally measured by higher dynamic range,

lower bias instability, and lower power. Bias drift compensation

by observing on-chip “auxiliary” sensors is viable when

extrinsic factors, such as ambient temperature and packaging

stress uctuations, cause the drift. As one example, die stress

compensation, which augments temperature compensation,

resulted in a signicant reduction in long-term drift in our

silicon-on-insulator mode-symmetric vibratory-rate gyroscope.

In the second example, pushing the state-of-the-art in dynamic

range in a CMOS-MEMS high-g shock sensor presents

challenges met by maturation of a system-on-chip design

comprising an array of hundreds of individual accelerometer

cells and augmented by piezoFET die-level stress sensors.

Bio: Gary K. Fedder is the Howard M. Wilkoff

Professor of Electrical and Computer

Engineering, Professor of The Robotics

Institute, and Vice Provost for Research at

Carnegie Mellon University. He previously

served in administrative roles at Carnegie

Mellon as Director of the Institute for Complex Engineered

Systems (2006–2014) and Associate Dean for Research in the

College of Engineering (2013–2015). From 2011 to 2012, Dr.

Fedder served as a technical co-lead in the U.S. Advanced

Manufacturing Partnership where he worked with industry,

academia, and government to generate recommendations

that motivated the launch of the National Network for

Manufacturing

Innovation, now called Manufacturing USA.

He was founding president and later served as interim CEO

of the Advanced Robotics for Manufacturing Institute in 2017.

Dr. Fedder received his B.S. and M.S. in EECS from MIT in

1982 and 1984, respectively, and his Ph.D. in EECS from the

University of California at Berkeley in 1994. He worked at

Hewlett-Packard as an R&D engineer

om 1984 to 1989.

His personal research lies in design and process integration

of MEMS where he has contributed to over 280 research

publications and holds 15 patents. He is an IEEE Fellow for

contributions to integrated MEMS. He served as subject editor

for the IEEE

Journal of Microelectromechanical Systems

from 2002 to 2013 and currently serves on the executive

editorial board for the IoP

Journal of Micromechanics and

Microengineering

, as a member of the editorial board for the

IET

Micro & Nano Letters

, and as co-editor of the Wiley-VCH

Advanced Micro- and Nanosystems book series.

Track 13: Micro- and Nano-Systems

Engineering and Packaging

13-2-2 MICRO- AND NANO-SYSTEMS ENGINEERING

AND PACKAGING PLENARY II

Thursday, November 15, 8:00am–8:45am

Room 303, David L. Lawrence Convention Center

2D Materials, Flexible Electrodes and Surfaces

(IMECE2018-90107)

Eui-Hyeok Yang

Stevens Institute of Technology, USA

Abstract: There has been a growing interest in two dimensional

(2D) crystals beyond graphene, exhibiting novel properties

and potential applications in next generation electronic and

photonic devices. Graphene has superior properties, including

high carrier mobility, ultrahigh surface area and excellent

thermal conductivity. Whereas the lack of a band gap is a

critical limitation for the use of graphene in elec

tronic devices,

monolayer semiconducting transition metal dichalcogenides

(TMDs) have shown highly promising prospects in electronics

and optoelectronics. Therefore, non-graphene 2D atomic

layers, such as hexagonal boron nitride (hBN) and TMDs, have

been integrated into research scale devices, thereby probing

mechanical, chemical, electrical and optoelectrical functions.

I will present our investigation of chemical vapour deposition

(CVD)-growth, achieving localized, patterned, single crystalline

or polycrystalline monolayers of TMDs, including MoS2, WS2,

WSe2 and MoSe2, as well as their heterostructures. We

particularly focus on enabling the fabrication of epitaxially

grown TMDs on other van der Waals materials towards

synthesizing TMDs with an ultralow-defect density. We perform

microscopic and macroscopic material characterization to

provide predictive strategies for TMD growth and in turn,

illuminate the role of dissimilar 2D substrates in t

he prevention

of interior defects in TMDs. We furthermore demonstrate the

growth of TMD homobilayers with well-ordered stacking angles

by controlling edge structures of the underlying TMD layer.

Other related projects include modelling to prevent the

anomalies encountered in topographic images of TMD

monolayers in dynamic atomic force microscopy, and

elucidating the effect of TMD surfaces and their geometric

arrangements on cellular morphology and adhesion. We also

investigate other nanomaterials, including vertically aligned

carbon nanotubes for stretchable supercapacitors. Building on

these results, our next step is to combine 2D materials with

exible substrates toward next generation wearable devices.

Currently my group is collaborating with many top research

groups in the US and around the world.

Biography: Eui-Hyeok Yang is a full professor

in the Mechanical Engineering Department at

Stevens Institute of Technology. He received

his Ph.D. from Ajou University, Korea. After his

postdo

oral training at University of Tokyo

and at California Institute of Technology, he

joined NASA’s Jet Propulsion Laboratory (JPL), where he

became a Senior Member of the Engineering Staff. In

recognition of his excellence in advancing the use of MEMS-

based actuators for NASA’s space applications, he received

the prestigious Lew Allen Award for Excellence at JPL in 2003.

He joined Stevens Institute of Technology as an Associate

Professor in the Department of Mechanical Engineering in

2006, established the Multi-User Micro Device Laboratory at

Stevens in 2008, and became a tenured full Professor in

Mechanical Engineering in 2014. Currently, his group’s research

covers the growth and nanofabrication of

graphene, carbon

nanotubes and TMD heterostructures, as well as the

implementation of tunable wetting and surface interaction. He

has received more than 35 major grants over the course of his

career from several federal agencies, including six NSF and

three AFOSR grants, and ve NASA and three NRO contracts.

Dr. Yang’s service to the professional community includes

formal appointments, such as Editorial Board Member of

Nature’s

Scientic Reports

, Associate Editor of

IEEE Sensors

Journal

, and Editorial Board Member of the Elsevier journal,

Nano-Structures & Nano-Objects

. Dr. Yang has published

hundreds of articles, books, and papers, as well as provided

keynotes, presentations, and seminars at various academic

and industrial events.

TRACK PLENARY

xliv

xlv

Room 9:45am–11:30am PG. 1:45pm–3:30pm PG. 3:45pm–5:30pm PG.

301 1-1-1: Nonlinear Phononics 1 1-1-2: Micro and Nano Phononics 2 1-1-3: Design of Phononic Crystals 3

and Metamaterials

302 1-2-1: General Noise and Vibration 1 1-3-1: Computational Acoustics 2 1-6-1: Flow-Induced Acoustics and 3

Control Human Perception of Noise

303 5-1-1: Product and Process Design I 55 5-1-2: Product and Process Design II 57 5-1-3: Product and Process Design III 59

304 5-5-1: Product Optimization I 55 5-5-2: Product Optimization II 57 5-8-1: Reliability and Risk in Energy 59

Systems

305 5-11-1: Failure and Forensic Analysis 55 5-12-1: Reliability Methods 58 5-13-1: Safety, Risk and Reliability of 60

Emerging Technologies

306 8-5-1: Energy Systems Components 89 8-2-1: Energy and Exergy Analysis of 91 8-5-2: Energy Systems Components – 94

– 1 Power Cycles 2

307 6-4-1: Robot Control I 65 6-4-2: Robot Control II 68 6-4-3: Robot Design I 70

308 6-4-7: Compliant Mechanisms 65 6-2-1: Dynamics, Vibration, and 67 6-2-2: Dynamics, Vibration, and 69

Control – I Control – II

309 6-13-1: Control Theory and 66 6-8-1: Mechanics of Smart Structures 68 6-8-2: Energy Harvesting and 70

Applications I Transducers

310 6-17-1: Multi-Physics Dynamics- 67 6-9-1: Novel Control of Dynamic 68 6-9-2: Novel Control of Dynamic 71

Control & Diagnostics-Prognostics of System I System II

Structures I

311 6-15-1: Measurement and Analysis 66 6-19-1: Renewable Energy, Structural 69 6-11-2: Vibrations of Continuous 71

Techniques in Nonlinear Dynamics I Health Monitoring, and Distributed Systems II

Structural Systems I

315 6-12-1: Mobile Service Robots and 65 6-12-2: Mobile Service Robots and 69 8-2-2: Thermodynamics of Cooling 94

Unmanned Vehicles I Unmanned Vehicles II and Thermal Processe

316 8-15-1: CMS-Biofuel Systems and 90 8-16-1: CMS-Biofuels Production, 93 8-1-1: Energy-Related Multidisciplinary 93

Processes Conversion, and Simulation – 1

317 8-4-1: Advanced Power Cycles 89 8-4-2: Improvement in Performance 91 8-4-3: Solar/Waste-Heat Power 94

and Emissions of Energy Systems Generation

318 8-11-1: Lithium Ion Batteries – Design 90 8-11-2: Modeling Efforts in Batteries 92 8-11-3: Structural Analysis of Li-Ion 95

and Performance Batteries

319 8-6-1: Low-Temperature Energy 89 8-10-1: Advanced Technologies for 92 8-10-2: Advanced Technologies for 95

Conversion Systems Wind Energy Solar Energy

323 10-3-1: K6-2 Numerical Analysis and 123 10-4-1: System Analysis 126 10-32-1: CMS - Combustion Power 129

Performance Assessment of Energy System

Systems

324 10-60-1: Prof. Frank Kreith Memorial 125 10-60-2: Prof. Frank Kreith Memorial 128 10-60-3: Prof. Frank Kreith Memorial 130

Symposium: Advances in Heat Symposium: Advances in Heat Symposium: Advances in Heat

Transfer, Energy Systems & Transfer, Energy Systems & Transfer, Energy Systems &

Sustainability – I Sustainability – II Sustainability – III

325 10-21-1: K9-1 Thermal Transport 123 10-21-2: K9-1 Thermal Transport 126 10-6-1: Batteries 128

Across Hard/Soft Interfaces – I Across Hard/Soft Interfaces – II

326 10-59-1: Heat and Mass Transport 124 10-20-1: Panel on Fundamentals of 126 10-22-1: K9-2 Coupled Thermal 129

Photogallery Non-Equilibrium Transport Transport by Electrons, Magnons, and

Phonons

327 10-4-2: Component/Material Design 123 10-40-1: K15-1 Transport Phenomena 127 10-8-1: Heat Transfer in Passive 129

and Analysis in Manufacturing and Materials Thermal Control Systems

Processing – I

321 11-2-1: Nanomaterials for Energy I 157 11-2-2: Nanomaterials for Energy II 159 11-15-1: Multifunctional Nanomaterials 161

320 11-7-1: Fracture and Damage: 157 11-7-2: Fracture and Damage: 159 11-9-1: Materials Processing and 161

Nano- to Macro-Scale I Nano- to Macro-Scale II Characterization I

330 11-8-1: Material Processing of Flexible 158 11-8-2: Material Processing of Flexible 159 11-8-3: Material Processing of Flexible 161

Electronics, Sensors, and Devices I Electronics, Sensors, and Devices II Electronics, Sensors, and Devices III

xlvi

Technical Program At-A-Glance

EXHIBIT HALL POSTER SESSIONS

Undergraduate Research and Design Expo Student Poster Competition Sunday, November 11 5:30pm–7:00pm

NSF Student Competition Wednesday, November 14 11:45am–2:30pm

Virtual Podium Wednesday, November 14 11:45am–2:30pm

MONDAY, NOVEMBER 12

Room 9:45am–11:30am PG. 1:45pm–3:30pm PG. 3:45pm–5:30pm PG.

331 12-15-1: Inaugural Symposium on 174 12-33-1: Congress-Wide Symposium 178 12-35-1: Congress-Wide Symposium 182

the Constitutive Modeling of the on NDE & SHM – Nondestructive on NDE & SHM – Active and Passive

Mechanical Behavior and Performance Characterization of Solids, Structures Health Monitoring of Structures

of Electronic, Photonic, MEMS, and and Fluids

NEMS Materials, Assemblies,

Packages, Modules, and Systems

333 12-1-1: Mechanics of Soft Materials: 173 12-1-2: Mechanics of Soft Materials: 176 12-1-3: Mechanics of Soft Materials: 179

Structure Gels/Active Materials 1 Gels/Active Materials 2

334 12-28-1: Instabilities in Solids and 175 12-28-2: Instabilities in Solids and 177 12-28-3: Instabilties in Solids and 181

Structures: Mechanics of Slender Structures: Numerical/Analytical Structures: Active and Soft Materials

Solids Stability

335 12-10-1: Modeling and Experiments in 173 12-10-2: Modeling and Experiments in 176 12-10-3: Modeling and Experiments in 179

Nanomechanics and Nanomaterials 1 Nanomechanics and Nanomaterials 2 Nanomechanics and Nanomaterials 3

336 12-18-1: Computational Modeling of 174 12-18-2: Computational Modeling of 177 12-13-1: Recent Advances and 180

Extreme Events Extreme Events Applications in Meshfree and Particle

Methods

338 12-19-1: Computational Fluid- 175 12-19-2: Computational Fluid- 177 12-19-3: Computational Fluid- 180

Structure Interaction Structure Interaction Structure Interaction

401 12-22-1: Deformation and Failure of 175 12-38-1: Young Medalist Symposium 179 12-38-2: Young Medalist Symposium 182

Multifunctional Materials

402 12-6-1: In-Situ Techniques in 173 12-36-1: Keynote Lectures on 178 12-36-2: Keynote Lectures on 182

Experimental Mechanics Computational Mechanics – 1 Computational Mechanics – 2

403 1-8-1: Vibration and Acoustic 1 1-8-2: Vibration and Acoustic 3 1-8-3: Vibration and Acoustic 4

Measurements, Signal Processing, Measurements, Signal Processing, Measurements, Signal Processing,

and Test Facilities I and Test Facilities II and Test Facilities III

404 10-51-1: Thermal Management of 124 10-54-1: Methods in Computational 127 10-42-1: K16-1: Heat Transfer in 130

Electronic Equipment Heat Transfer Electronic Equipment – I

405 5-17-1: Structural Systems 56 5-17-2: Full Vehicle Crashworthiness 58 12-22-2: Deformation and Failure of 181

Crashworthiness and Occupants Protection Multifunctional Materials

406 5-14-1: Testing for Product Reliability 56 5-16-1: Safety in Transportation, 58 5-16-2: Safety in Transportation, 60

and Safety Agriculture, and Off-Road Vehicles Agriculture, and Off-Road Vehicles

407 11-11-1: Modeling, Simulation and 158 11-11-2: Modeling, Simulation and 160 11-4-1: Materials and 3D Printing for 160

Design of Multifunctional Materials 1 Design of Multifunctional Materials 2 Biology and Medicine

Room 8:00am–9:45am PG. 10:00am–11:45am PG. 1:45pm–3:30pm PG. 3:45pm–5:30pm PG.

301 9-17-1: Fluids Engineering 109 1-12-1: NDE & SHM: 6 1-1-5: Topological 6 1-1-7: Control of 7

Plenary I Ultrasonic Waves for Phononics II Phononic Crystals and

9-17-2: Fluids Engineering 109 Material Characterization Metamaterials

Plenary II and Damage Assessment

302 8-17-1: Energy Plenary 96 1-1-4: Topological 5 1-1-6: Theory, 6 5-18-1: General 64

Phononics I Computation, and

Experiments in Phononics

303 6-1-1: Dynamics, Vibration, 72 5-1-4: Product and 61 5-2-1: Social Context 62 5-18-2: General 64

and Control Plenary Process Design IV Aware Design

304 5-19-1: Design, Reliability, 61 5-4-1: CAD, CAM and 61 5-4-2: CAD, CAM and 63 11-8-5: Material Processing 166

Safety, and Risk Plenary CAE Design I CAE Design II of Flexible Electronics,

Sensors, and Devices V

305 1-13-1: Acoustics, 5 5-10-1: Topics on Safety 62 5-10-2: Topics on Risk 63 6-20-1: Dynamics, 79

Vibration,and and Hazard Analysis and Hazard Analysis Vibration, and Control for

Phononics Plenary Structural Health

Monitoring Applications I

306 10-64-1: Heat Transfer and 131 6-10-1: Multibody Dynamic 74 6-10-2: Multibody 76 6-10-3: Multibody 78

Thermal Engineering Systems and Dynamic Systems and Dynamic Systems and

Plenary I Applications I Applications II Applications III

10-64-2: Heat Transfer and 131

Thermal Engineering

Plenary II

307 11-23-1: Materials: Genetics 162 6-4-4: Robot Design II 72 6-4-5: Mechanism 74 6-4-6: Mechanism 77

to Structures Plenary I Design I Design II

11-23-2: Materials: Genetics 162

to Structures Plenary II

xlvii

Technical Program At-A-Glance

MONDAY, NOVEMBER 12

TUESDAY, NOVEMBER 13

Room 8:00am–9:45am PG. 10:00am–11:45am PG. 1:45pm–3:30pm PG. 3:45pm–5:30pm PG.

308 12-40-1: Mechanics of 183 6-6-1: Vibration, Noise 73 6-6-2: Vibration, Noise 75 6-6-3: Vibration, Noise 77

Solids, Structures and Control and Damping Control and Damping Control and Damping

Fluids Plenary I Technologies I Technologies II Technologies III

12-40-2: Mechanics of 183

Solids, Structures and

Fluids Plenary II

309 6-7-1: Dynamics and 73 6-3-1: Nonlinear Dynamics, 74 6-3-2: Nonlinear Dynamics, 76

Control in Micro/Nano Control, and Stochastic Control, and Stochastic

Engineering I Mechanics I Mechanics II

310 6-5-1: Fluid-Structure 72 6-5-2: Fluid-Structure 75 6-11-1: Vibrations of 78

Interaction I Interaction II Continuous Systems I

311 8-2-3: Chemical 96 8-2-4: On Entropy and 98 8-8-1: Environmental 101

Thermodynamic Processes Irreversibilities’ Minimization Aspects of Energy Systems

315 8-1-2: Energy-Related 96 8-14-1: Nuclear Power 99 8-7-1: Thermal Energy 101

Multidisciplinary – 2 Plants: Design, Analysis, Storage – Devices I

and Safety

316 8-4-4: Engines Behaviour 97 8-4-5: Design and Analysis 98 8-4-6: Design and Analysis 100

and Fuel Characteristics of Energy Systems – 1 of Energy Systems – 2

317 8-11-4: Thermal Aspects 97 8-11-5: Beyond Li-Ion 99 8-3-1: Thermoeconomics 100

of Li-Ion Batteries Batteries

318 8-10-3: Advanced 97 8-10-4: Advanced 99 8-10-5: Advanced 102

Technologies for Ocean Technologies for Wind Technologies for Solar

Energy Energy II Energy II

319 9-3-1: Fluid Mechanics 109 9-3-2: Fluid Mechanics 111 9-3-3: Fluid Mechanics 112

and Rheology of Nonlinear and Rheology of Nonlinear and Rheology of Nonlinear

Materials and Complex Materials and Complex Materials and Complex

Fluids – I Fluids – II Fluids – III

320 10-15-1: Fundamentals of 132 10-15-2: K8-1 134 10-15-3: K8-1 137

Boiling and Evaporation Fundamentals of Boiling Fundamentals of Boiling,

Evaporation, and

Condensation

321 10-7-1: Analysis of 131 10-7-2: Radiative 134 10-10-1: K6-9 Two Phase 137

Radiative Transfer in Properties Transport in Energy

Energy Systems Systems and Non-

Equilibrium and Dynamic

Energy Systems

323 9-5-1: CFD Applications 109 9-5-2: CFD Applications 111 9-5-3: CFD Applications 113

for Flow Optimization and for Flow Optimization for Flow Optimization

Control – I and Control – II and Control – III

324 9-9-1: Mathematical 110 9-9-2: Droplet 112 9-9-3: Fundamentals and 113

Modeling in Microuidics Microuidics Applications of

Microuidics

325 9-18-1: Young Engineers 110 9-11-1: Computational 112 9-11-2: Experimental 114

Paper (YEP) Contest Modeling of Multiphase Characterization of

Flows Complex Multiphase Flows

326 10-33-1: CMS – Sprays 133 10-34-1: CMS – Applied 135 10-34-2: CMS – Applied 138

and Emissions Combustion: Modeling Combustion: Improving

Heat Transfer and System Performance

Combustion

327 10-42-2: K16-1: Heat 133 10-53-1: Applications of 136 10-53-2: Applications of 139

Transfer in Electronic Computational Heat Computational Heat

Equipment – II Transfer: Convection Transfer: Industrial

Applications

330 10-23-1: K9-3 Phononic 132 10-23-2: K9-3 Phononic 135 10-25-1: K9-5 Micro-/ 138

Crystals and Crystals and Nanoscale Phase Change

Thermoelectrics – I Thermoelectrics – II Heat Transfer – I

331 11-9-2: Materials 163 11-9-3: Materials 164 11-9-4: Materials 166

Processing and Processing and Processing and

Characterization II Characterization III Characterization IV

333 11-8-4: Material 162 11-10-1: Bioinspired 164 11-10-2: Bioinspired 166

Processing of Flexible Composites and Materials, Structures and

Electronics, Sensors, and Structures Applications

Devices IV

334 11-12-1: Mechanics in 163 11-12-2: Mechanics in 165 11-14-1: Multifunctional 167

Manufacturing of Manufacturing of Composite Materials

Multifunctional Materials Multifunctional Materials and Structures 1

and Structures I and Structures II

xlviii

Technical Program At-A-Glance

TUESDAY, NOVEMBER 13

Room 8:00am–9:45am PG. 10:00am–11:45am PG. 1:45pm–3:30pm PG. 3:45pm–5:30pm PG.

335 12-10-4: Modeling and 184 12-17-1:Failure and 187 12-17-2:Failure and 190

Experiments in Fracture of Additively Fracture of Additively

Nanomechanics and Manufactured Materials Manufactured Materials

Nanomaterials 4 and Structures – 1 and Structures – 2

336 12-1-4: Mechanics of 183 12-1-5: Mechanics of 186 12-1-6: Mechanics of 188

Soft Materials: Constitutive Soft Materials: Soft Materials: Electro/

Modeling Bioinspiration and Magneto/Chemo-

Biomimetics Mechanics

338 12-28-4: Instabilities in 185 12-28-5: Instabilities in 187 12-13-2: Recent Advances 190

Solids and Structures: Solids and Structures: and Applications in

Stability of Composites, Phase Transformations/ Meshfree and Particle

Foams/Open-Cell Materials Transitions and Multi- Methods

stability

401 12-8-1: Multi-Scale 183 12-8-2: Multi-Scale 186 12-8-3: Multi-Scale 189

Computations in Fluids, Computations in Fluids, Computations in Fluids,

Structures, and Materials 1 Structures, and Materials 2 Structures, and Materials 3

402 12-19-4: Computational 184 12-31-1: Design of 187 12-31-2: Functionality of 191

Fluid-Structure Interaction Mechanical Metamaterials Mechanical Metamaterials

403 12-39-1: Drucker Medal 185 12-39-2: Drucker Medal 188 12-39-3: Drucker Medal 191

Symposium Symposium Symposium

404 12-12-1: Mechanics of 184 12-12-2: Mechanics of 186 12-12-3: Mechanics of 189

Thin-Film and Multi-Layer Thin-Film and Multi-Layer Thin-Film and Multi-Layer

Structures Structures Structures

405 1-4-1: Structural-Acoustic 5 1-11-1: NDE & SHM: 7 10-39-1: Gas Turbine 139

System Identication Acoustic and Vibration Heat Transfer and Cooling

Methods in Structural

Health Monitoring and

Nondestructive Testing

406 10-36-1: K13-1 Heat 133 10-36-2: K13-1 Heat 136 10-40-2: K15-1 Transport 139

Transfer in Multiphase Transfer in Multiphase Phenomena in

Systems – I Systems – II Manufacturing and

Materials Processing – II

407 10-6-2: Capacitors 137 11-14-4: Multifunctional 164 11-15-2: Multifunctional 165

Composite Materials and Nanomaterials 2

Structures 4

Room 9:00am–9:45am PG. 10:00am–11:45am PG. 1:45pm–3:30pm PG. 3:45pm–5:30pm PG.

301 13-2-1: Micro- and Nano- 213 2-2-1: Congress-Wide 9 2-2-2: Congress-Wide 12 2-2-3: Congress-Wide 14

Systems Engineering and Symposium on Additive Symposium on Additive Symposium on Additive

Packaging Plenary I Manufacturing: Metals- Manufacturing: Metals- Manufacturing: Metals –

Directed Energy Directed Energy Powder Bed Fusion I

Deposition I Deposition II

302 7-13-1: Engineering 81 2-13-1: Congress-Wide 10 2-13-2: Manipulators and 13 2-13-3: Algorithms and 15

Education Plenary Symposium on Additive Interfaces Optimization

Manufacturing: Robotic

Additive Manufacturing

303 4-1-1: Biomedical and 39 2-15-1: Digital 11 2-15-2: Digital 13 2-15-3: Digital 16

Biotechnology Plenary I Manufacturing in Cyber- Manufacturing in Digital Manufacturing in Industry

Manufacturing Aspects Twin Aspects 4.0 Aspects

304 3-20-1: Advances in 29 2-5-1: Mechanics and 9 2-5-2: Sensors and 12 2-5-3: Synthesis and 14

Aerospace Technology Physics of 2D Materials Electronics of 2D Materials Processing of 2D Materials

Plenary I

305 2-1-1: Advanced 9 2-6-1: Advanced Surface 10 2-6-2: Conventional 12 2-14-2: Laser-Matter 15

Manufacturing Plenary Modication Using Machining Interaction and Its

Machining Applications in Materials

Processing

306 2-14-1: Surface 11 3-12-1: Peridynamics 30 3-7-1: Dynamic Behavior 32

Modication Based on Modeling – 1 of Composites

Laser Peening and Ablation

xlix

Technical Program At-A-Glance

TUESDAY, NOVEMBER 7

WEDNESDAY, NOVEMBER 14

Room 9:00am–9:45am PG. 10:00am–11:45am PG. 1:45pm–3:30pm PG. 3:45pm–5:30pm PG.

307 3-18-1: Congress-Wide 29 3-19-1: Congress-Wide 31 3-2-1: Advances in 31

Symposium on NDE & Symposium on NDE & SHM: Aerodynamics

SHM: Structural Health Nondestructive Evaluation

Monitoring of Aerospace and Structural Health

Vehicles Monitoring of Composite

Materials and Structures

308 3-1-1: General Aerospace 29 3-4-1: Advances in 30 4-4-1: Tissue 42

Aerospace Structures and Characterisations

Materials – 1

309 4-2-4: Damage 39 4-3-1: Vibration 40 4-3-2: Vibration 42

Biomechanics IV: Characteristics and Applications to Therapy

Cavitation as a Mechanism Characterisations and Rehabilitation

for Brain Injury

310 4-8-1: Dynamics and 39 4-8-2: Dynamics and 41 4-8-3: Dynamics and 43

Control of Biomechanical Control of Biomechanical Control of Biomechanical

Systems I Systems II Systems III

311 4-10-1: Biomedical 40 4-10-2: Biomedical 41 4-10-3: Biomedical 43

Modeling I Modeling II Modeling III

315 4-11-1: Sports Related 40 4-11-2: Musculoskeletal 42 4-11-3: Musculoskeletal 44

Brain Injury and Modeling Biomechanics and Sport Biomechanics

316 7-5-1: Applied Mechanics, 82 7-5-2: Applied Mechanics, 83 7-12-1: Engineering 85

Dynamic Systems and Dynamic Systems and Research Innovation

Control Engineering – I Control Engineering – II

317 7-2-1: Globalization of 81 7-1-1: Curriculum 82 7-1-2: Curriculum 84

Engineering Innovations, Pedagogy Innovations, Pedagogy

and Learning and Learning

Methodologies – I Methodologies – II

318 7-4-1: Systems Engineering 81 7-4-2: Systems Engineering 83 7-9-1: K-12 STEM, RET- 84

and Sustainable and Sustainable University, School and

Engineering Education – I Engineering Education – II Industry Alliance, Session

in Honor of Late Professor

Devdas Pai

319 8-9-1: Cooling Technologies 103 8-9-2: Building Energy 104 8-9-3: Building Structure/ 106

Generation Materials for Load

Reduction

320 10-25-2: K9-5 Micro-/ 141 10-26-1: Measurement of 143 10-26-2: Theoretical 144

Nanoscale Phase Change Near-Field Thermal Prediction of Thermal

Heat Transfer – II Radiation Emission and Energy

Conversion

321 9-13-1: Industrial Flows – I 115 9-13-2: Industrial Flows – II 116 9-13-3: Industrial Flows – III 118

323 8-7-2: Thermal Energy 102 8-7-3: Thermal Energy 104 8-7-4: Thermal Energy 106

Storage – Materials Storage – Devices II Storage – Systems

Integration

324 8-12-1: PEM Fuel Cells – I 104 8-12-2: PEM Fuel Cells – II 105 8-12-3: Fuel Cell Systems 107

and Infrastructure

325 8-10-6: Energy Storage, 103 8-10-7: Biomass, 105 8-10-8: Feasibility and 106

Energy Harvesting, and Geothermal, and Small Techno-Economic Analysis

Electric Cars Scale Generation of Renewable Energy

Technologies

326 9-5-4: CFD Applications 115 9-8-1: Kirti Ghia 116 9-8-2: Kirti Ghia 117

for Flow Optimization and Celebration of Life – I Celebration of Life – II

Control – IV

327 9-11-3: Simulation of 115 9-11-4: Modeling of Slug 116 9-6-1: Computational or 117

Multiphase Flows in Pumps Flows, Separators and Experimental Fluid

and Complex Systems Shocks Dynamics? – A Dilemma

for Industries

330 10-36-3: K13-1 Heat 141 10-21-3: K9-1 Thermal 143 10-11-1: K6-10 Panel on 144

Transfer in Multiphase Transport Across Hard/ the Key Role of Heat

Systems – III Soft Interfaces – III Transfer Analysis and

Methodology in Research

331 10-16-1: K8-2 140 10-17-1: Fundamentals of 142 10-18-1: K8-4 144

Fundamentals of Single Multi-Scale Modeling Fundamentals of Liquid/

Phase Convection Solid Phase Change (Icing/

Deicing, Solidication)

333 10-44-1: Thermal Transport 142 10-29-7: Micro-/ 143 10-44-2: Thermal 145

Under Microscale and Nanoelectronics and Transport Understanding

Rotating Features Related Issues and Its Applications

Technical Program At-A-Glance

WEDNESDAY, NOVEMBER 14

Room 9:00am–9:45am PG. 10:00am–11:45am PG. 1:45pm–3:30pm PG. 3:45pm–5:30pm PG.

334 11-9-5: Materials 168 11-9-6: Materials 169 11-13-1: Multiphysics and 171

Processing and Processing and Multiscale Modeling of

Characterization V Characterization VI Lithium-Ion Batteries

335 11-14-2: Multifunctional 168 11-14-3: Multifunctional 169 11-20-1: Recent 171

Composite Materials and Composite Materials and Developments in Tribology

Structures 2 Structures 3

336 11-18-1: Phase 168 11-18-2: Phase 170 11-6-1: Nanoengineered, 170

Transformations in Transformations in Hierarchical, Multi-Scale

Materials Processing I: Materials Processing II: Materials and Structures

Additive Manufacturing Microstructures and

Properties

338 12-1-7: Mechanics of Soft 192 12-1-8: Mechanics of Soft 194 12-26-1: Mechanics of 198

Materials: Characterization Materials: Fracture, Soft Materials and Soft

Dissipation, and Self- Robots

Healing

401 12-31-3: Mechanics of 194 12-31-4: Recongurable 196 12-5-1: Quantitative 197

Mechanical Metamaterials Mechanical Metamaterials Visualization Related to

Fracture & Crack Growth

Processes

402 12-4-1: Mechanics of 192 12-4-2: Mechanics of 195 12-4-3: Mechanics of 197

Adhesion and Friction Adhesion and Friction Adhesion and Friction

403 12-7-1: Multiscale Models 193 12-7-2: Multiscale Models 195 12-7-3: Multiscale Models 198

and Experimental and Experimental and Experimental

Techniques for Composite Techniques for Composite Techniques for Composite

Materials and Structures Materials and Structures Materials and Structures

404 12-12-4: Mechanics of 193 12-29-1: Peridynamic 196 12-29-2: Peridynamics for 199

Thin-Film and Multi-Layer Modelling and Analysis Composites, Fracture, and

Structures Corrosion Damage

405 12-21-1: Fatigue Modeling 194 12-21-2: Fracture Modeling 196 12-21-3: Material Model 198

in Engineering Materials in Engineering Materials and Fracture Theory

Development

406 13-3-1: Design and 213 13-3-2: Design and 213 13-4-1: Computational 214

Fabrication, Analysis, Fabrication, Analysis, Studies on MEMS and

Processes, and Technology Processes, and Technology Nanostructures I

for Micro and Nano for Micro and Nano

Devices and Systems I Devices and Systems II

Room 8:00am–8:45am PG. 8:55am–10:40am PG. 10:50am–12:35pm PG. 2:05pm–3:50pm PG. 4:00pm–5:45pm PG.

301 2-2-4: Congress- 16 2-2-5: Congress- 19 2-2-6: Congress- 22 2-2-7: Congress- 25

Wide Symposium Wide Symposium Wide Symposium Wide Symposium

on Additive on Additive on Additive on Additive

Manufacturing: Manufacturing: Manufacturing: Manufacturing:

Metals – Powder Polymers I Polymers II Composites/

Bed Fusion II Ceramics & Bio-

Applications

302 2-8-1: Novel 17 2-8-2: Formability 20 2-8-3: Formability 23 2-8-4: Testing and 26

Processes – I – II Defects

303 13-2-2: Micro- and 214 2-11-1: Advanced 18 2-11-2: Advanced 21 2-11-3: Advanced 23 2-11-4: Advanced 27

Nano-Systems Manufacturing Manufacturing Manufacturing Manufacturing

Engineering and Processes- Processes- Processes- Processes-

Packaging Plenary II Modeling and Modeling and Modeling and Modeling and

Simulation I Simulation II Simulation III Simulation V

304 4-1-2: Biomedical 45 2-4-1: 16 2-4-2: 19 2-4-3: 22 2-7-1: Bonded 26

and Biotechnology Nanomanufacturing: Nanomanufacturing: Nanomanufacturing: Joint and Bolted

Plenary II Spray or Print Nanomaterials Integration of Joint Technologies

Deposition Synthesis and Nanoscale

Techniques for Assembly Materials or

Nanomaterials and Textures for

Nanostructures Enhanced

Performance

305 3-20-2: Advances in 32 2-6-3: Assisted 17 2-6-4: Nontraditional 20 2-6-5: Machinability 22 2-6-6: Cutting Tool 25

Aerospace Machining Machnining of Engineering Performance and

Technology Plenary II Techniques Processes Materials Treatment

Technical Program At-A-Glance

WEDNESDAY, NOVEMBER 14

THURSDAY, NOVEMBER 15

Room 8:00am–8:45am PG. 8:55am–10:40am PG. 10:50am–12:35pm PG. 2:05pm–3:50pm PG. 4:00pm–5:45pm PG.

306 3-6-1: Lightweight 32 3-6-2: Lightweight 34 3-4-2: Advances in 35 3-17-1: Nonlinear 37

Sandwich Sandwich Aerospace Problems in

Composites and Composites and Structures and Aerospace

Layered Structures Layered Structures Materials – 2 Structures

– 1 (in Honor of – 2 (in Honor of

Prof. Frostig) Prof. Frostig)

307 3-8-1: Dynamics 33 3-12-2: 35 3-10-1: Impact, 36 3-12-3: 36

and Control of Peridynamics Damage and Peridynamics

Aerospace Modeling – 2 Fracture of Modeling – 3

Structures Composite

Structures

308 4-4-2: Biomedical 45 4-2-3: Damage 47 4-2-2: Damage 49 4-2-1: Damage 51

Imaging and Biomechanics III: Biomechanics II: Biomechanics I:

Characterisation Materials Ballistic Impact Blunt Impact

Characterization, and Blast Effects Effects and

Modeling and and Analysis Analysis

Analysis

309 4-5-1: Biomaterials 45 4-5-2: Biomaterials 48 4-5-3: Biomaterials 50 4-5-4: Biomaterials 52

and Tissue I: and Tissue II: and Tissue III: and Tissue IV:

Fabrication Modelling Sythesis and Sythesis and

Characterization Characteriazation

310 4-7-1: Detection 46 4-7-2: Surgical 48 4-7-3: Fluid and 50 4-7-4: 53

and Monitoring Assistive Devices Microuid Rehabilitation and

Biomedical Devices Biomedical Devices Treatment Devices

311 4-10-4: Biomedical 46 4-10-5: Biomedical 49 4-9-1: Clinical 51 4-9-2: Clinical 53

Modeling IV Modeling V Applications of Applications of

Bioengineering I – Bioengineering II

Experimental

Methods

315 4-14-1: Biotransport 47 4-14-2: Heat 49 7-7-1: Problem 87 7-7-2: Problem 88

Transfer and Fluid Solving in Solving in

Engineering Engineering

Education, Reseach Education, Reseach

and Practice – I and Practice – II

316 7-10-1: Teaching 86 7-3-1: Engineering 86 7-3-2: Engineering 87 7-6-1: Fluid 87

Laboratories, Accreditation, Accreditation, Mechanics,

Machine Shop Data Collection, Data Collection, Heat Transfer,

Experiences and Assessment and Assessment and Experiments and

Technology-Aided ABET Session I ABET Session II Energy Systems

Learning

317 7-8-1: Distance/ 85 7-8-2: Distance/ 86 9-2-1: Electric, 120 4-6-1: 52

Online Engineering, Online Engineering, Magnetic & Mechanobiology

Models and Models and Thermal

Enabling Enabling Phenomena

Technologies – I Technologies – II

318 9-12-1: Multiphase 118 9-4-1: 119 9-4-2: 121 9-4-3: Fundamental 122

Flow with Fundamentals and Computational Fluids Engineering

Bio-applications Basic Research Methods in Fluid and Applications

Mechanics

319 9-14-1: Symposium 118 9-16-1: Fluid 120 9-16-2: Fluid 121

on Wind Turbines Measurements and Measurements and

Aerodynamics and Instrumentation – I Instrumentation – II

Control

320 12-26-2: Mechanics 201 12-26-3: Mechanics 204 12-26-4: Mechanics 207 12-26-5: Mechanics 210

of Soft Materials of Soft Materials of Soft Materials of Soft Materials

and Soft Robots and Soft Robots and Soft Robots and Soft Robots

321 10-63-2: Multi- 148 12-41-1: Dynamic 205 12-41-2: Dynamic 209 12-32-1: High- 212

Phase and Passive Failure of Failure of Performance

Enhanced Heat Materials and Materials and Nanostructural

Transfer Structures Structures Materials and

Nanocomposites

323 9-15-1: 18th 119 10-29-3: Transport 149 10-61-1: K8-7 152 10-61-2: K8-7 154

International at Interfaces Fundamentals of Fundamentals of

Symposium on Boiling and Condensation,

Measurement and Condensation – II-B Transient Boiling,

Modeling of and

Environmental Flows Dehumidication

lii

Technical Program At-A-Glance

THURSDAY, NOVEMBER 15

Room 8:00am–8:45am PG. 8:55am–10:40am PG. 10:50am–12:35pm PG. 2:05pm–3:50pm PG. 4:00pm–5:45pm PG.

324 10-26-3: Radiative 147 10-27-1: Thermal 149 10-29-1: Heat 151 10-28-1: K9-8 153

Properties and Metrology for Conduction in 2D Advances in

Radiative Transfer Nanoscale Heat Materials/Devices Simulation Methods

in the Far Field Transfer

325 10-29-2: Heat 147 10-50-1: Heat 152 10-1-1: Analysis of 153

Transfer Devices Transfer in HVAC Thermal Systems

and Engineering Systems and Air

Quality and Comfort

in Conned Spaces

326 10-13-1: 146 10-14-1: 149 10-14-2: 151

Measurements of Calculations of Calculations of

Thermophysical Thermophysical Thermophysical

Properties Properties 1 Properties 2

327 10-47-1: Heat 148 10-62-1: Single- 153 10-63-1: Multi- 155

Transfer and Phase Enhanced Phase and Passive

Heat Exchange Heat Transfer - Enhanced Heat

Applications Transfer

330 12-3-1: Mechanical 200 12-3-2: Mechanical 202 12-3-3: Mechanical 205

Characterization Characterization Characterization

in Extreme in Extreme in Extreme

Environments I Environments II Environments III

331 12-14-1: Plastic 200 12-14-2: Multi- 203 12-14-3: Numerical 206 12-27-4: 211

Anisotropy Scale Modelling of Modeling With Multifunctional and

Modeling Plastic Anisotropy Applications to Micro-/Nano-

Forming structured Materials:

Modeling and

Characterization (IV)

333 12-2-1: 3D Printing 200 12-2-2: Mechanics 202 12-16-1: Multiscale 206 12-16-2: Multiscale 209

of Novel Materials of 3D Printed Modeling and Modeling and

Materials Experimentation Experimentation

of Geomaterials of Geomaterials

334 12-20-1: Multiscale 206 12-20-2: Multiscale 210

Mechanics of Mechanics of

Ductile Failure Ductile Failure

335 12-25-1: Mechanics 201 12-25-2: Mechanics 204 12-30-1: 208 12-30-2: 211

and Design of and Design of Symposium on Symposium on

Cellular Materials Cellular Materials Multiphyics Multiphyics

Simulations and Simulations and

Experiments for Experiments for

Solids Solids

336 12-27-1: 202 12-27-2: 204 12-27-3: 208 13-8-2: 217

Multifunctional Multifunctional Multifunctional Microuidics in

and Micro-/Nano- and Micro-/Nano- and Micro-/Nano- Bioengineering

structured Materials: Structured Materials: structured Materials: Applications

Modeling and Modeling and Modeling and

Characterization (I) Characterization (II) Characterization (III)

338 13-1-1: General 214 13-6-1: Micro/ 215 13-7-1: Applied 215 13-3-3: Design and 216

Topics of MEMS/ Nano Materials Mechanics and Fabrication, Analysis,

NEMS and Devices Materials I Processes, and

Technology for Micro

and Nano Devices

and Systems III

401 13-4-2: 215 2-7-2: Welding 23 2-9-2: Innovative 26

Computational Performance Product Design II

Studies on MEMS Evaluation and

and Nanostructures Simulation

402 2-12-1: Variation 18 2-12-2: Variation 21 2-9-1: Innovative 24 12-14-4: 209

Simulation and Simulation and Product Design I Experimental and

Design for Design for Theoretical Models

Assembly I Assembly II for Anisotropic

Plasticity and

Fracture

403 3-9-1: Materials 33 3-5-1: Beam, 34 3-3-1: Novel 35 3-13-1: Multibody 37

and Structures at Plate, and Shell Aerodynamics and Dynamics Simulation

High Temperature Structures Aerospace in Aerospace

and Extreme Propulsion Systems Structures

Conditions

liii

Technical Program At-A-Glance

THURSDAY, NOVEMBER 15

Room 8:00am–8:45am PG. 8:55am–10:40am PG. 10:50am–12:35pm PG. 2:05pm–3:50pm PG. 4:00pm–5:45pm PG.

404 12-21-4: Meso- 203 12-21-5: 207

scale Modeling Uncertainty

and Material Modeling in

Fracture Fracture and

Characterization Fatigue

405 10-29-5: Thermal 146 10-29-4: Thermal 150 13-8-1: Electric 216 13-7-2: Applied 217

Engineering With Conductivity Field Driven Mechanics and

Plasmonic Materials Microuidics Materials II

406 10-30-2: Single- 150 10-30-1: Single- 152 10-30-3: Single- 154

Phase Enhanced Phase Enhanced Phase Enhanced

Heat Transfer: Heat Transfer: Heat Transfer:

Numerical Studies Numerical Studies Numerical Studies

–I –II –III

liv

Technical Program At-A-Glance

THURSDAY, NOVEMBER 15

1-1-1: Nonlinear Phononics

1-1-2: Micro and Nano Phononics

1-1-3: Design of Phononic Crystals and Metamaterials

1-1-4: Topological Phononics I

1-1-5: Topological Phononics II

1-1-6: Theory, Computation, and Experiments in Phononics

1-1-7: Control of Phononic Crystals and Metamaterials

1-11-1: NDE & SHM: Acoustic and Vibration Methods in Structural Health

Monitoring and Nondestructive Testing

1-12-1: NDE & SHM: Ultrasonic Waves for Material Characterization and Damage

Assessment

1-13-1: Acoustics, Vibration, and Phononics Plenary

1-2-1: General Noise and Vibration Control

1-3-1: Computational Acoustics

1-4-1: Structural-Acoustic System Identication

1-6-1: Flow-Induced Acoustics and Human P

erception of Noise

1-8-1: Vibration and Acoustic Measurements, Signal Processing, and Test

Facilities I

1-8-2: Vibration and Acoustic Measurements, Signal Processing, and Test

Facilities II

1-8-3: Vibration and Acoustic Measurements, Signal Processing, and Test

Facilities III

Track Organizers

Weidong Zhu,

University of Maryland,

United States

Mostafa Nouh,

University at Buffalo,

United States

Shung H. Sung,

SHS Consulting, LLC,

United States

Topic Organizers

Mahmoud Hussein,

University of

Colorado Boulder, United States

Liang-Wu Cai,

Kansas State University,

United States

Albert Kirwan,

Electric Boat, United

States

Yousof Azizi,

Bridgestone Americas,

United States

Miao Yu,

University of Maryland, United

States

Weidong Zhu,

University of Maryland,

Baltimore County, United States

Yongfeng Xu,

University of Cincinnati,

United States

Robert Tomko,

Naval Nuclear Laboratory,

United States

Kristin Cody,

Naval Nuclear Laboratory,

United States

Haijun Liu, T

emple University, United

States

Andrei Zagrai,

New Mexico Institute of

Mining & Technology, United States

Shiv Joshi,

NextGen Aeronautics, United

States

Session Organizers

Mahmoud Hussein, U

niversity of

Colorado Boulder, United States

Ankit Srivastava,

Illinois Institute of

Technology, United States

Nicholas Boechler,

University of

Washington, United States

Jinkyu Yang,

University of Washington,

United States

Kathryn Matlack,

University of Illinois

Urbana-Champaign, United States

Brent Paul,

Alion Science and

Technology, United States

Yongfeng Xu,

University of Cincinnati,

United States

Zhongquan Charlie Zheng,

University of

Kansas, United States

Firooz Bakhtiari-Nejad,

Amirkabir

University of Technology, United

States

TRACK 1 ACOUSTICS, VIBRATION, AND

PHONONICS

MONDAY, NOVEMBER 12

1-1 PHONONIC CRYSTALS AND

METAMATERIALS

1-1-1 Nonlinear Phononics

Third Floor, David L. Lawrence Convention Center, Room 301

9:45am–11:30am

Session Chair: Mahmoud Hussein,

University of Colorado

Boulder, Boulder, CO, United States

Session Co-Chair: Liang-Wu Cai,

Kansas State University,

Manhattan, KS, United States

9:45am – Nonlinear Wave Propagation in Reconﬁgurable 2D

Multistable Lattices With Bistable Springs

Technical Presentation. IMECE2018-89741

Julien Meaud,

Georgia Institute of Technology, Atlanta, GA,

United States

10:06am – Switchable Phononics via Instabilities in Soft

Composites

Technical Presentation. IMECE2018-88467

Stephan Rudykh,

Technion - Israel Institute of Technology,

Haifa, Israel

10:27am – Inter-Modal Energy Tunneling With

Subwavelength Characteristics in Nonlinear Waveguides

Technical Presentation. IMECE2018-87877

Weijian Jiao, Stefano Gonella,

University of Minnesota,

Minneapolis, MN, United States

10:48am – Conversion of Compressive Impact to Tensile

Stress Waves via Origami-Based Mechanical

Metamaterials

Technical Presentation. IMECE2018-87767

Hiromi Yasuda, Yasuhiro Miyazawa, Jinkyu Yang,

University

of Washington, Seattle, WA, United States

1-2 GENERAL NOISE AND VIBRATION

CONTROL

1-2-1 General Noise and Vibration Control

Third Floor, David L. Lawrence Convention Center, Room 302

9:45am–11:30am

Session Chair: Albert Kirwan,

Electric Boat, Groton, CT, United

States

Session Co-Chair: Brent Paul,

Alion Science and Technology,

Harrisburg, PA, United States

9:45am – Numerical Investigation on Effects of Structure

Parameters on Acceleration Noise of Involute Spur Gear

System Under Different Operation Conditions

Technical Paper Publication. IMECE2018-86955

Changyin Wei, Jingang Wang, Hai Liu, Yong Chen,

Hebei

University of Technology, Tianjin, China,

Hanzhengnan Yu,

China Automotive Technology & Research Center, Tianjin,

China,

Kunqi Ma,

Hebei University of Technology, Tianjin,

China

10:06am – An Improved Optimal Adaptive Control Method

for MIMO Sine Vibration Control of a Multichannel Coupled

System

Technical Paper Publication. IMECE2018-86983

Li Chao, Zhangwei Chen,

Zhejiang University, Hangzhou,

China,

Zu Hongfei,

University of Pittsburgh, Pittsburgh, PA,

United States,

Zhao Yugang,

Econ Technologies Co., Ltd.,

Hangzhou, China

10:27am – Experimental Investigation on the Vibration and

Noise Characteristics of the Vibration Damping Alloy

Material

Technical Paper Publication. IMECE2018-87189

Xiang Ji, Yong Chen, Hai Liu,

Hebei University of Technology,

Tianjin, China,

Hanzhengnan Yu,

China Automotive

Technology & Research Center, Tianjin, China,

Changyin Wei,

Zhibiao Yan,

Hebei University of Technology, Tianjin, China

10:48am – Different Deﬁnitions of Entropy for Statistical

Energy Analysis

Technical Paper Publication. IMECE2018-87240

Zahra Sotoudeh,

Cal Poly Pomona, Pamona, CA, United

States

11:09am – Objective Evaluation of FCV Interior Sound

Quality During Acceleration

Technical Paper Publication. IMECE2018-87011

Hai Liu,

Hebei University of Technology, Tianjin, China,

Yanyi Zhang, Dong Hao,

China Automotive Technology

and Research Center, Tianjin, China,

Yong Chen, Xiang Ji,

Changyin Wei,

Hebei University of Technology, Tianjin, China

1-8 VIBRATION AND ACOUSTIC

MEASUREMENTS, SIGNAL PROCESSING,

AND TEST FACILITIES

1-8-1 Vibration and Acoustic Measurements, Signal

Processing, and Test Facilities I

Fourth Floor, David L. Lawrence Convention Center, Room 403

9:45am–11:30am

Session Chair: Kristin Cody,

Naval Nuclear Laboratory,

Jefferson Hills, PA, United States

Session Co-Chair: Zhongquan Charlie Zheng, University of

Kansas, Lawrence, KS, United States

9:45am – Analyzing Interrelationships Between Structural

Damping and Vibro-Acoustic Performances of Elastic

Materials

Technical Presentation. IMECE2018-88778

Antonio Figueroa, Mike Telenko,

Shiloh Industries, Plymouth,

MI, United States,

Sean Wu, Lingguang Chen,

Wayne State

University, Detroit, MI, United States

10:06am – Parametric Study of Helmholtz Resonator

Performance and Effect of Poroacoustic Material Use in

Resonator Design

Technical Presentation. IMECE2018-88750

Yasaman Esfandiari, Atul Kelkar, Shan Hu,

Iowa State

University, Ames, IA, United States

TRACK  ACOUSTICS, VIBRATION, AND PHONONICS

–

MONDAY, NOVEMBER 

10:27am – On the Free Vibration Analysis of a Sandwich

Beam With Tip Mass

Technical Paper Publication. IMECE2018-87535

Eshagh Farzaneh Joubaneh, Oumar Raﬁou Barry,

Central

Michigan University, Mount Pleasant, MI, United States

10:48am – A Comprehensive Tool for Locating and

Analyzing Sound Sources

Technical Presentation. IMECE2018-88800

Yazhong Lu, Lingguang Chen,

Wayne State University,

Detroit, MI, United States

1-1 PHONONIC CRYSTALS AND

METAMATERIALS

1-1-2 Micro and Nano Phononics

Third Floor, David L. Lawrence Convention Center, Room 301

1:45pm–3:30pm

Session Chair: Ankit Srivastava,

Illinois Institute of Technology,

Chicago, IL, United States

1:45pm – Soft Opals Beyond Hypersonic Phononics

Technical Presentation. IMECE2018-88712

Yu Cang, Zuyuan Wang,

Max Planck Institute for Polymer

Research, Mainz, Germany,

Krzysztof Matyjaszewski,

Micheal R. Bockstaller,

Carnegie-Mellon University,

Pittsburgh, PA, United States,

George Fytas,

Max Planck

Institute for Polymer Research, Mainz, Germany

2:06pm – Direct Observation of Polymer Surface Mobility

via Nanoparticle Vibrations

Technical Presentation. IMECE2018-88711

Yu Cang, Eunsoo Kang, Bartlomiej Graczykowski,

Max Planck Institute for Polymer Research, Mainz, Germany,

Hojin Kim,

University of Delaware, Newark, DE, United States,

Maria Secchi, Maurizio Montagna,

University of Trento,

Trento, Italy,

Rodney D. Priestley,

Princeton University,

Princeton, NJ, United States,

Eric M. Furst,

University of

Delaware, Newark, DE, United States,

George Fytas,

Max Planck Institute for Polymer Research, Mainz, Germany

2:27pm – The Effect of Randomness on the Wave

Propagation Characteristics of Open-Cell Foams

Technical Presentation. IMECE2018-87861

Alireza Bayat, Stavros Gaitanaros,

Johns Hopkins University,

Baltimore, MD, United States

2:48pm – Anisotropic Sub-GHz Phonon Propagation in

Fibrous Plant Cell Walls

Technical Presentation. IMECE2018-88622

Maroun Abi Ghanem,

University of California San Diego, La

Jolla, CA, United States,

Liliane Khoryati,

Benaroya Research

Institute at Virginia Mason, Seattle, WA, United States,

Samuel

Raetz,

Le Mans Université, Le Mans, France,

Amey

Khanolkar,

University of Washington, Seattle, WA, United

States,

Nicholas Boechler,

University of California San Diego,

La Jolla, CA, United States,

Thomas Dehoux,

Université

Claude Bernard Lyon 1, Villeurbanne, France

3:09pm – Thermal Conductivity Reduction by Full-Spectrum

Phonon-Resonance Hybridizations

Technical Presentation. IMECE2018-87451

Hossein Honarvar, Mahmoud Hussein,

University of

Colorado Boulder, Boulder, CO, United States

1-3 COMPUTATIONAL ACOUSTICS

1-3-1 Computational Acoustics

Third Floor, David L. Lawrence Convention Center, Room 302

1:45pm–3:30pm

Session Chair: Sue Sung,

Ford, Dearborn, MI, United States

Session Co-Chair: Albert Kirwan,

Electric Boat, Groton, CT,

United States

1:45pm – Modeling the Wind Turbine Proﬁles Assuring the

Maximum Lift Force With Low-Noise Operation for Variable

Wind Velocities

Technical Paper Publication. IMECE2018-86795

Victorita Radulescu,

University Politechnica of Bucharest,

Bucharest, Romania

2:06pm – An Acoustic Analogy to Evaluate the Total

Acoustic Power of a Cooling Fan Using Mesh Morpher

Optimizer

Technical Paper Publication. IMECE2018-86873

Mike Kheirallah,

Advanced Safety and Energy, Flint, MI,

United States,

Badih Jawad,

Lawrence Technological

University, Dearborn Heights, MI, United States,

Abdallah

Hamieh, Liping Liu,

Lawrence Technological University,

Southeld, MI, United States

2:27pm – Structural-Acoustic Modeling and Optimization of

a Submarine Pressure Hull

Technical Presentation. IMECE2018-89535

James Spain,

University of Michigan, Ann Arbor, MI, United

States,

Geng Zhang, Sergey Medyanik,

MES, Ann Arbor, MI,

United States,

Nickolas Vlahopoulos,

University of Michigan,

Ann Arbor, MI, United States

2:48pm – Numerical Prediction of Hood Lift and Vibration of

Trailing Automobiles

Technical Presentation. IMECE2018-89627

Rodrigo Auza Gutierrez, Jack McNamara,

Ohio State

University, Columbus, OH, United States,

Austin Kimbrell,

Peter Kang,

Honda R&D Americas, Inc., Raymond, OH, United

States

TRACK  ACOUSTICS, VIBRATION, AND PHONONICS

–

MONDAY, NOVEMBER 

1-8 VIBRATION AND ACOUSTIC

MEASUREMENTS, SIGNAL PROCESSING,

AND TEST FACILITIES

1-8-2 Vibration and Acoustic Measurements, Signal

Processing, and Test Facilities II

Fourth Floor, David L. Lawrence Convention Center, Room 403

1:45pm–3:30pm

Session Chair: Robert Tomko,

Naval Nuclear Laboratory,

South Park, PA, United States

1:45pm – Use of Ultrasonic and Audio Signals to Monitor

Temperature in Stratospheric Balloons

Technical Paper Publication. IMECE2018-87131

Matthew C. Jones,

South Dakota School of Mines and

Technology, Westminster, CO, United States,

Jason T. Ash,

South Dakota School of Mines and Technology, Rapid City, SD,

United States,

Michael Smith,

Raven Aerostar International

Inc., Sulphur Springs, TX, United States,

Charles R. Tolle,

South Dakota School of Mines and Technology, Rapid City, SD,

United States

2:06pm – The Study of Holey Cavity in the Application of

Thermoacoustics Imaging

Technical Paper Publication. IMECE2018-87757

Chang Liu, Ashkan Ghanbarzadeh Dagheyan, Juan Heredia

Juesas, Ali Molaei, Jose Martinez Lorenzo,

Northeastern

University, Boston, MA, United States

2:27pm – Application of a Resonant Metamaterial Line

Array in Ultrasound Compressive Imaging

Technical Paper Publication. IMECE2018-88011

Ashkan Ghanbarzadeh Dagheyan, Ali Molaei, Juan Heredia

Juesas, Jose Martinez Lorenzo,

Northeastern University,

Boston, MA, United States

2:48pm – A Holey Cavity for High-Capacity Ultrasound

Imaging

Technical Paper Publication. IMECE2018-88028

Ashkan Ghanbarzadeh Dagheyan, Juan Heredia Juesas,

Chang Liu, Ali Molaei, Jose Martinez Lorenzo,

Northeastern

University, Boston, MA, United States

1-1 PHONONIC CRYSTALS AND

METAMATERIALS

1-1-3 Design of Phononic Crystals and

Metamaterials

Third Floor, David L. Lawrence Convention Center, Room 301

3:45pm–5:30pm

Session Chair: Nicholas Boechler,

University of Washington,

Seattle, WA, United States

3:45pm – Design of Acoustic Metamaterials Using Gradient

Based Optimization

Technical Paper Publication. IMECE2018-88254

Feruza Amirkulova,

San Jose State University, San Jose, CA,

United States,

Andrew Norris,

Rutgers University, Piscataway,

NJ, United States

4:06pm – Broadening the Bandgaps of Sonic Crystals by

Varying Shapes, Sizes, and Orientations of the Scatterers

Technical Paper Publication. IMECE2018-87398

Debasish Panda, Amiya Ranjan Mohanty,

Indian Institute of

Technology Kharagpur, Kharagpur, West Bengal, India

4:27pm – Broadband Control of Propagating Waves Using

Smooth Changes in Flexural Rigidity: Lenses, Cloaks, and

Acoustic Patterns

Technical Presentation. IMECE2018-87654

Amir Darabi,

Georgia Institute of Technology, Atlanta, GA,

United States,

Michael Leamy,

Georgia Institute of

Technology, Marietta, GA, United States

4:48pm – Tunable Tensegrity Metastructure for

Compression-Torsion Coupled Wave Control

Technical Presentation. IMECE2018-87338

Rui Zhu, Yitian Wang, Xiaoning Liu, Gengkai Hu,

Beijing

Institute of Technology, Beijing, China

5:09pm – A Metamaterials Design Approach From Discrete

Models

Technical Presentation. IMECE2018-87903

Kathryn Matlack,

University of Illinois at Urbana-Champaign,

Urbana, IL, United States,

Marc Serra,

ETH Zurich, Zurich,

Switzerland,

Antonio Palermo,

California Institute of

Technology, Pasadena, CA, United States,

Sebastian Huber,

ETH Zurich, Zurich, Switzerland,

Chiara Daraio,

California

Institute of Technology, Pasadena, CA, United States

1-6 FLOW-INDUCED ACOUSTICS AND

HUMAN PERCEPTION OF NOISE

1-6-1 Flow-Induced Acoustics and Human Perception

of Noise

Third Floor, David L. Lawrence Convention Center, Room 302

3:45pm–5:30pm

Session Chair: Robert Tomko,

Naval Nuclear Laboratory,

South Park, PA, United States

Session Co-Chair: Haijun Liu,

Temple University, Philadelphia,

PA, United States

3:45pm – Human Response and Perception of UAV Noise in

Simulated Warehouse Environments

Technical Presentation. IMECE2018-88081

Jesse Callanan, Payam Ghassemi, James Dimartino,

Christina Stocking, Souma Chowdhury, Mostafa Nouh,

University at Buffalo, State University of New York, Buffalo, NY,

United States

4:06pm – A Bio-Inspired Pressure Difference Receiver With

Optical Detection

Technical Presentation. IMECE2018-88945

Qian Dong, Haijun Liu,

Temple University, Philadelphia, PA,

United States

TRACK  ACOUSTICS, VIBRATION, AND PHONONICS

–

MONDAY, NOVEMBER 

4:27pm – Quadruple Flow and Acoustic Coincident

Resonance of Rotating Bladed Disks Interacting With

Stationary Elements

Technical Paper Publication. IMECE2018-86303

Frank Kushner,

Frank Kushner Consulting, Delmont, PA,

United States

4:48pm – The Physics of Deep Surge in an Automotive

Turbocharger Centrifugal Compression System

Technical Paper Publication. IMECE2018-87716

Rick Dehner, Ahmet Selamet,

Ohio State University,

Columbus, OH, United States

5:09pm – Experimental Study on the Leakage and

Rotordynamic Coefﬁcients of a Long Smooth Seal at

Laminar Flow Conditions

Technical Paper Publication. IMECE2018-88717

Min Zhang,

Praxair, Inc., Tonawanda, NY, United States,

Dara Childs, T

exas A&M University, College Station, TX,

United States

1-8 VIBRATION AND ACOUSTIC

MEASUREMENTS, SIGNAL PROCESSING,

AND TEST FACILITIES

1-8-3 Vibration and Acoustic Measurements, Signal

Processing, and Test Facilities III

Fourth Floor, David L. Lawrence Convention Center, Room 403

3:45pm–5:30pm

Session Chair: Kristin Cody,

Naval Nuclear Laboratory,

Jefferson Hills, PA, United States

Session Co-Chair: Zhongquan Charlie Zheng,

University of

Kansas, Lawrence, KS, United States

3:45pm – On the Dynamic Loading Effects of Soil on Plastic

Water Distribution Pipes and Its Signiﬁcance for Leak

Detection Using Acoustics

Technical Paper Publication. IMECE2018-87420

Oscar Scussel, Michael J. Brennan,

Universidade Estadual

Paulista, Ilha Solteira, São Paulo, Brazil,

Jennifer M.

Muggleton,

University of Southampton, Southampton, United

Kingdom,

Fabrício César Lobato de Almeida,

Universidade

Estadual Paulista, Tupã, São Paulo, Brazil,

Amarildo Tabone

Paschoalini,

Universidade Estadual Paulista, Ilha Solteira,

São Paulo, Brazil

4:06pm – Capturing BW Zone in an Intact Rotor System

Technical Paper Publication. IMECE2018-87480

Fatima Alhammadi, Mohammad AL-Shudeifat, Oleg

Shiryayev,

Khalifa University of Science and Technology,

Abu Dhabi, United Arab Emir.

4:27pm – Research on the Weak Signal Detection of

Bearing Fault Based on Dufﬁng Oscillator

Technical Paper Publication. IMECE2018-86892

Long Hao, Dan Liu, Fei Liu, Qingxin Wang, Lin Liang,

Guanghua Xu,

Xi’an Jiaotong University, Xi’an, China

4:48pm – Deep Convolutional Neural Network for Early Disk

Crack Diagnosis Under Variable Speed

Technical Paper Publication. IMECE2018-87247

Ruonan Liu, Ruqiang Yan, Meng Ma, Xuefeng Chen,

Xi’an

Jiaotong University, Xi’an, Shaanxi, China

TRACK  ACOUSTICS, VIBRATION, AND PHONONICS

–

MONDAY, NOVEMBER 

TUESDAY, NOVEMBER 13

1-13 PLENARY

1-13-1 Acoustics, Vibration, and Phononics Plenary

Third Floor, David L. Lawrence Convention Center, Room 305

8:00am–8:45am

8:00am – Active Acoustic Metamaterials

Plenary Presentation. IMECE2018-90090

Amr Baz,

University of Maryland, College Park, MD, United

States

1-1 PHONONIC CRYSTALS AND

METAMATERIALS

1-1-4 Topological Phononics I

Third Floor, David L. Lawrence Convention Center, Room 302

10:00am–11:45am

Session Chair: Mostafa Nouh,

University at Buffalo, State

University of New York, Buffalo, NY, United States

10:00am – Topological Phononic Crystals

Technical Presentation. IMECE2018-87617

Zeguo Chen,

King Abdullah University of Science and

Technology, Thuwal, Saudi Arabia,

Jun Mei,

South China

University of Technology, Guangzhou, China,

Ying Wu,

King Abdullah University of Science and Technology, Thuwal,

Saudi Arabia

10:21am – One-Dimensional Linear Bidirectional Acoustic

Diodes

Technical Presentation. IMECE2018-86801

Weiqiu Chen,

Zhejiang University, Hangzhou, China

10:42am – Non-Reciprocal Wave Phenomena Through

Pump-Signal Wave Interaction in Discrete Metastructures

Undergoing Large Deformation

Technical Presentation. IMECE2018-87976

Samuel P. Wallen, Benjamin M. Goldsberry, Michael R.

Haberman,

University of Texas at Austin, Austin, TX, United

States

11:03am – Use of Betti-Reciprocity in Metamaterials

Technical Presentation. IMECE2018-86358

Amir Ashkan Mokhtari, Ankit Srivastava,

Illinois Institute of

Technology, Chicago, IL, United States

11:24am – Demonstration of Topological Waveguiding in

Locally Resonant Plate Structures

Technical Presentation. IMECE2018-87774

Rajesh Chaunsali, Chun-Wei Chen, Jinkyu Yang,

University

of Washington, Seattle, WA, United States

1-4 STRUCTURAL-ACOUSTIC SYSTEM

IDENTIFICATION

1-4-1 Structural-Acoustic System Identication

Fourth Floor, David L. Lawrence Convention Center, Room 405

10:00am–11:45am

Session Chair: Weidong Zhu,

University of Maryland,

Baltimore County, Baltimore, MD, United States

Session Co-Chair: Yongfeng Xu,

University of Cincinnati,

Cincinnati, OH, United States

10:00am – Detection of Misﬁre in a Six-Cylinder Diesel

Engine Using Acoustic Emission Signals

Technical Paper Publication. IMECE2018-86506

Mohammad Jafari,

Queensland University of Technology,

Brisbane, Queensland, Australia,

Pietro Borghesani,

University of New South Wales, Sydney, New South Wales,

Australia,

Puneet Verma,

Queensland University of

Technology, Brisbane, Queensland, Australia,

Ashkan

Eslaminejad,

North Dakota State University, Fargo, ND, United

States,

Zoran D. Ristovski, Richard J. Brown,

Queensland

University of Technology, Brisbane, Queensland, Australia

10:21am – An Acoustic Field Reconstruction Method of

Near-Field Acoustic Radiation Modes Decomposition

Technical Presentation. IMECE2018-88940

Jie Wang,

Zhejiang University of Technology, Zhejiang,

Zhejiang, China,

Zubin Liu,

Zhejiang University of Technology,

Hangzhou, Zhejiang, China,

Liying Jiang,

Zhejiang University

of Technology, Zhejiang, China,

Huancai Lu,

Zhejiang

University of Technology, Hangzhou, China

10:42am – Operational Modal Analysis and Damage

Identiﬁcation of Structures Undergoing Random Vibration

Using a Continuously Scanning Laser Doppler Vibrometer

System

Technical Paper Publication. IMECE2018-88058

Daming Chen,

University of Maryland, Baltimore County,

Baltimore, MD, United States,

Yongfeng Xu,

University of

Cincinnati, Cincinnati, OH, United States,

Weidong Zhu,

University of Maryland, Baltimore County, Baltimore, MD,

United States

11:03am – Reducing Structure-Borne Sound Radiation via

Vibro-Acoustic Analysis

Technical Presentation. IMECE2018-88769

Lingguang Chen, Sean Wu, Yazhong Lu,

Wayne State

University, Detroit, MI, United States

11:24am – Nonlinear Vibration Analysis of a Fractional

Viscoelastic Euler-Bernoulli Microbeam

Technical Paper Publication. IMECE2018-87061

Firooz Bakhtiari-Nejad, Ehsan Loghman, Mostafa Pirasteh,

Amirkabir University of Technology, Tehran, MD, United States

TRACK  ACOUSTICS, VIBRATION, AND PHONONICS

–

TUESDAY, NOVEMBER 

1-12 CONGRESS-WIDE SYMPOSIUM ON

NDE & SHM: ULTRASONIC WAVES FOR

MATERIAL CHARACTERIZATION AND

DAMAGE ASSESSMENT

1-12-1 NDE & SHM: Ultrasonic Waves for Material

Characterization and Damage Assessment

Third Floor, David L. Lawrence Convention Center, Room 301

10:00am–11:45am

Session Chair: Yongfeng Xu,

University of Cincinnati,

Cincinnati, OH, United States

Session Co-Chairs: Weidong Zhu,

University of Maryland,

Baltimore County, Baltimore, MD, United States,

Firooz

Bakhtiari-Nejad,

Amirkabir University of Technology, Tehran,

MD, United States

10:00am – Elasto-Plastic Modeling of Beams for

Impedance Based Structural Health Monitoring

Technical Paper Publication. IMECE2018-87910

Naserodin Sepehry,

Shahrood University of Technology,

Shahrood, Iran,

Firooz Bakhtiari-Nejad,

Amirkabir University

of Technology, Tehran, MD, United States,

Weidong Zhu,

University of Maryland, Baltimore County, Baltimore, MD,

United States

10:21am – Real-Time Imaging of Damage Precursors in

Complex Composites

Technical Presentation. IMECE2018-88816

Fatemeh Pourahmadian,

University of Colorado Boulder,

Boulder, CO, United States

10:42am – Computational Time- Domain Wave Modeling in

Anisotropic Plate

Technical Presentation. IMECE2018-88863

Sajan Shrestha, Sourav Banerjee,

University of South

Carolina, Columbia, SC, United States

11:03am – Passive Extraction of Green’s Function of Solids

and Application to High-Speed Rail Inspection

Technical Presentation. IMECE2018-89371

Francesco Lanza Di Scalea, Albert Liang, Simone Sternini,

Margherita Capriotti,

University of California San Diego, La

Jolla, CA, United States

11:24am – Generation and Propagation of Rayleigh Surface

Wave in Anisotropic Materials by Line-Focus Ultrasonic

Transducer

Technical Presentation. IMECE2018-88278

Qiuyan Li, Chenglong Ji, Yuxiang Wang, Qing-Ming Wang,

University of Pittsburgh, Pittsburgh, PA, United States

1-1 PHONONIC CRYSTALS AND

METAMATERIALS

1-1-5 Topological Phononics II

Third Floor, David L. Lawrence Convention Center, Room 301

1:45pm–3:30pm

Session Chair: Jinkyu Yang,

University of Washington, Seattle,

WA, United States

1:45pm – The Applicability of the Principle of Reciprocity in

Acoustic Metamaterials

Technical Presentation. IMECE2018-88611

Allan Pierce,

Retired, East Sandwich, MA, United States

2:06pm – Topological Mechanics of Edge Waves in Kagome

Lattices

Technical Presentation. IMECE2018-88195

Hui Chen, Hussein Nassar, Guoliang Huang,

University of

Missouri, Columbia, MO, United States

2:27pm – Experimental Observation of Valley-Hall Edge

States in Elastic Waveguides Based on Diatomic-

Graphene-Like Phononic Crystals

Technical Presentation. IMECE2018-89423

Hongfei Zhu, Fabio Semperlotti, Ting-Wei Liu,

Purdue

University, West Lafayette, IN, United States

2:48pm – Universal Wave Manipulation by Periodic

Gyro-Elastic Structures

Technical Presentation. IMECE2018-88926

Mohamma

d Ali Attarzadeh,

University at Buffalo, State

University of New York, Tonawanda, NY, United States,

Mostafa Nouh,

University at Buffalo, State University of New

York, Buffalo, NY, United States

1-1-6 Theory, Computation, and Experiments in

Phononics

Third Floor, David L. Lawrence Convention Center, Room 302

1:45pm–3:30pm

Session Chair: Kathryn Matlack,

University of Illinois Urbana-

Champaign, Urbana, IL, United States

1:45pm – Study on Generation of Dual-Dirac Cone at k ? = 0

and Its Features by Angle Based Tunable Engineered

Phononic Crystal

Technical Presentation. IMECE2018-89099

Mustahseen Indaleeb, Hossain Ahmed, Sourav Banerjee,

University of South Carolina, Columbia, SC, United States

2:06pm – Modeling and Experimentation on 3D Printed

Decoupled and Mixed Mode Mechanical Metamaterials

Technical Presentation. IMECE2018-88336

Alireza Amirkhizi, Fateme Aghighi, Joshua Morris, Weidi

Wang,

University of Massachusetts, Lowell, Lowell, MA, United

States

TRACK  ACOUSTICS, VIBRATION, AND PHONONICS

–

TUESDAY, NOVEMBER 

2:27pm – Deep Convolutional Neural Networks for

Eigenvalue Problems in Mechanics

Technical Presentation. IMECE2018-87281

David Finol, Yan Lu,

Illinois Institute of Technology, Chicago,

IL, United States,

Vijay Mahadevan,

Amazon AWS AI, Seattle,

IL, United States,

Ankit Srivastava,

Illinois Institute of

Technology, Chicago, IL, United States

2:48pm – The Phononic Problem Under the Spectral

Theorem

Technical Presentation. IMECE2018-89670

Ankit Srivastava,

Illinois Institute of Technology, Chicago, IL,

United States

1-11 CONGRESS-WIDE SYMPOSIUM ON

NDE & SHM: ACOUSTIC AND VIBRATION

METHODS IN STRUCTURAL HEALTH

MONITORING AND NONDESTRUCTIVE

TESTING

1-11-1 NDE & SHM: Acoustic and Vibration Methods

in Structural Health Monitoring and Nondestructive

Testing

Fourth Floor, David L. Lawrence Convention Center, Room 405

1:45pm–3:30pm

Session Chair: Weidong Zhu,

University of Maryland,

Baltimore County, Baltimore, MD, United States

Session Co-Chair: Yongfeng Xu,

University of Cincinnati,

Cincinnati, OH, United States

1:45pm – Effect of Angular Acceleration and Unbalance

Force Orientation on the Backward Whirl in Cracked

Rotors

Technical Paper Publication. IMECE2018-87476

Fatima Alhammadi, Mohammad AL-Shudeifat, Oleg

Shiryayev,

Khalifa University of Science and Technology, Abu

Dhabi, United Arab Emir.

2:06pm – A Nondestructive Evaluation Method Based on

the Propagation of Nonlinear Solitary Waves

Technical Presentation. IMECE2018-87555

Amir Nasrollahi, Piervincenzo Rizzo,

University of Pittsburgh,

Pittsburgh, PA, United States

2:27pm – Transmission of Information by Acoustic

Communication Along Metal Pathways in Nuclear Facilities

Technical Presentation. IMECE2018-88155

Alexander Heifetz, Richard Vilim, Sasan Bakhtiari,

Argonne

National Laboratory, Lemont, IL, United States

2:48pm – “Flute Without Flute” An Experiment in

Turbulence Management

Technical Presentation. IMECE2018-88722

B.G. Shiva Prasad,

Fluid Thermal Technologies, Sidney, OH,

United States

1-1 PHONONIC CRYSTALS AND

METAMATERIALS

1-1-7 Control of Phononic Crystals and

Metamaterials

Third Floor, David L. Lawrence Convention Center, Room 301

3:45pm–5:30pm

Session Chair: Mahmoud Hussein,

University of Colorado

Boulder, Boulder, CO, United States

Session Co-Chair: Liang-Wu Cai,

Kansas State University,

Manhattan, KS, United States

3:45pm – Active Acoustic Metamaterials with

Programmable Densities Using an H-∞ Controller

Technical Paper Publication. IMECE2018-87749

Amr Baz,

University of Maryland, College Park, MD, United

States

4:06pm – A Programmable Metasurface for Real Time

Control of Broadband Elastic Rays

Technical Presentation. IMECE2018-88554

Yangyang Chen, Xiaopeng Li, Hussein Nassar, Guoliang

Huang,

University of Missouri, Columbia, MO, United States

4:27pm – The Auxetic Nature of Shunted Piezoelectrics

Technical Presentation. IMECE2018-89490

Carson Willey,

UES, Inc./AFRL, WPAFB, OH, United States,

Philip Buskohl, Abigail Juhl,

AFRL/RXAS, WPAFB, OH, United

States

4:48pm – Tunable Phononic Crystals With Kirigami-Based

Structures

Technical Presentation. IMECE2018-88877

Ronghao Bao,

Zhejiang Univeristy, Hangzhou, Zhejiang, China

5:09pm – 3D Printed Magnetorheological Elastomer

Metastructures With Magnetically Tunable Band Gaps

Technical Presentation. IMECE2018-89586

Connor D. Pierce,

University of Illinois at Urbana-Champaign,

Urbana, IL, United States,

Vincent Chen, James Hardin,

Carson Willey,

UES, Inc./AFRL, WPAFB, OH, United States,

Dan Berrigan,

Air Force Research Laboratory, WPAFB, OH,

United States,

Abigail Juhl,

AFRL/RXAS, WPAFB, OH, United

States,

Kathryn Matlack,

University of Illinois at Urbana-

Champaign, Urbana, IL, United States

TRACK  ACOUSTICS, VIBRATION, AND PHONONICS

–

TUESDAY, NOVEMBER 

NOTES

2-1-1: Advanced Manufacturing Plenary

2-11-1: Advanced Manufacturing Processes-Modeling and Simulation I

2-11-2: Advanced Manufacturing Processes-Modeling and Simulation II

2-11-3: Advanced Manufacturing Processes-Modeling and Simulation III

2-11-4: Advanced Manufacturing Processes-Modeling and Simulation V

2-12-1: Variation Simulation and Design for Assembly I

2-12-2: Variation Simulation and Design for Assembly II

2-13-1: Congress-Wide Symposium on Additive Manufacturing: Robotic Additive

Manufacturing

2-13-2: Manipulators and Interfaces

2-13-3: Algorithms and Optimization

2-14-1: Surface Modication based on Laser Peening and Ablation

2-14-2: Laser-Matter Interaction and Its Applications in Materials Processing

2-15-1: Digital Manufacturing in Cyber-Manufacturing Aspects

2-15-2: Digital Manufacturing in Digital Twin Aspects

2-15-3: Digital Manufacturing in Industry 4.0 Aspects

2-2-1: Congress-Wide Symposium on Additive Manufacturing: Metals – Directed Energy

Deposition I

2-2-2: Congress-Wide Symposium on Additive Manufacturing: Metals – Directed Energy

Deposition II

2-2-3: Congress-Wide Symposium on Additive Manufacturing: Metals – Powder Bed Fusion I

2-2-4: Congress-Wide Symposium on Additive Manufacturing: Metals – Powder Bed Fusion II

2-2-5: Congress-Wide Symposium on Additive Manufacturing: Polymers I

2-2-6: Congress-Wide Symposium on Additive Manufacturing: Polymers II

2-2-7: Congress-Wide Symposium on Additive Manufacturing: Composites/Ceramics &

Bio-Applications

2-4-1: Nanomanufacturing: Spray or Print Deposition Techniques for Nanomaterials and

Nanostructures

2-4-2: Nanomanufacturing: Nanomaterials Synthesis and Assembly

2-4-3: Nanomanufacturing: Integration of Nanoscale Materials or Textures for Enhanced

Performance

2-5-1: Mechanics and Physics of 2D Materials

2-5-2: Sensors and Electronics of 2D Materials

2-5-3: Synthesis and Processing of 2D Materials

2-6-1: Advanced Surface Modication Using Machining

2-6-2: Conventional Machining

2-6-3: Assisted Machining Techniques

2-6-4: Nontraditional Machnining Processes

2-6-5: Machinability of Engineering Materials

2-6-6: Cutting Tool Performance and Treatment

2-7-1: Bonded Joint and Bolted Joint Technologies

2-7-2: Welding Performance Evaluation and Simulation

2-8-1: Novel Processes

2-8-2: Formability – I

2-8-3: Formability – II

2-8-4: Testing and Defects

2-9-1: Innovative Product Design I

2-9-2: Innovative Product Design II

Track Organizers

Junghoon Yeom,

Michigan State

University, United States

Ruth Jill Urbanic,

University of Windsor,

Canada

William Emblom,

University of Louisiana-

Lafayette, United States

Marriner Merrill,

US Naval Research

Laboratory, United States

Topic Organizers

Junghoon Yeom,

Michigan State

University, United States

Ruth Jill Urbanic,

University of Windsor,

Canada

Scott Thompson,

Auburn University,

United States

Nima Shamsaei,

Auburn University,

United States

Mehran Tehrani,

University of New

Mexico, United States

Matt Maschmann,

University of Missouri,

United States

Dimitry Papkov,

University of Nebraska-

Lincoln, United States

Chih-Hao Chang,

North Carolina State

University, United States

Pilgyu Kang,

George Mason University,

United States

SungWoo Nam,

University of Illinois,

Urbana-Champaign (UIUC), United

States

Chi Hwan Lee,

Purdue University, United

States

Muhammad Jahan,

Miami University,

United States

Chang Ye,

University of Akron, United

States

Sathish Kannan,

American University of

Sharjah, United Arab Emirates

Yang Guo,

Michigan State University,

United States

Sayed Nassar,

Oakland University,

United States

Zhijun (Jason) Wu,

Oakland University,

United States

Thomas Whitney,

University of Dayton,

United States

Chetan Nikhare,

Pennsylvania State

University, United States

Scott Wagner,

Michigan Tech, United

States

Ricardo Jardim-Goncalves,

Universidade

Nova De Lisboa - Faculdade De

Cincias E Tecnologia, Portugal

Joao Silva,

Universidade do Minho,

Portugal

David Romero,

ITEMS, Mexico

Siddharthsinh Jadeja,

Aditya Silver Oak

Institute of Technology, India

Jianfeng Ma,

Saint Louis University,

United States

Yucheng Liu,

Mississippi State

University, United States

Stephanie Wimmer,

Naval Research

Laboratory, United States

Kristina Wärmefjord,

Chalmers University

of Technology, Sweden

Hua Wang,

Shanghai Jiao Tong

University, China

Daniel Cox,

Georgia Southern University,

United States

Andrzej Nycz,

Oak Ridge National

Laboratory, United States

Chang Ye,

University of Akron, United

States

Xin Zhao,

Clemson University, United

States

Dong Lin,

Kansas State University,

United States

Wenda Tan,

University of Utah, United

States

Yeqing Wang,

Mississippi State

University, United States

David Guerra-Zubiaga,

Kennesaw State

University, United States

Germanico Gonzalez-Badillo,

Universidad Autonoma De San Luis

Potosi, Mexico

Kai He,

Shenzhen Institutes of Advanced

Technology, Chinese Academy of

Sciences, China

Session Organizers

Roozbeh (Ross) Salary,

Marshall

University, United States

Scott Thompson,

Auburn University,

United States

Nima Shamsaei,

Auburn University,

United States

Ruth Jill Urbanic,

University of Windsor,

Canada

Albert To,

University of Pittsburgh, United

States

Mehran Tehrani,

University of New

Mexico, United States

Junghoon Yeom,

Michigan State

University, United States

Heather Lai,

SUNY New Paltz, United

States

Deborah D.L. Chung,

University at

Buffalo, State University of NY, United

States

Gretar Tryggvason,

Johns Hopkins

University, United States

Matt Maschmann,

University of Missouri,

United States

Chih-Hao Chang,

North Carolina State

University, United States

Dimitry Papkov,

University of Nebraska-

Lincoln, United States

Pilgyu Kang,

George Mason University,

United States

Mike Cai Wang,

University of South

Florida, United States

Pawan Tyagi,

University of the District of

Columbia, United States

Muhammad Jahan,

Miami University,

United States

Lewis Payton,

Auburn University, United

States

P.V.M. Rao,

IIT Delhi, India

Sathish Kannan,

American University of

Sharjah, United Arab Emir.

Chang Ye,

University of Akron, United

States

Guha Manogharan,

Penn State

University, United States

Yang Guo,

Michigan State University,

United States

Derek Yip-Hoi,

Western Washington

University, United States

Muhammad Jahan,

Miami University,

United States

Ihab Ragai,

Penn State University, United

States

Sayed Nassar,

Oakland University,

United States

Thomas Whitney,

University of Dayton,

United States

Chetan Nikhare,

Pennsylvania State

University, United States

Molla Hasan,

Department of Mechanical

and Aerospace Engineering, Rutgers,

United States

Ricardo Jardim-Goncalves,

Universidade

Nova De Lisboa – Faculdade De

Cincias E Tecnologia, Portugal

Joao Silva,

Universidade do Minho,

Portugal

Joao Sarraipa,

UNINOVA –

DEE/FCT/UNL, Portugal

Virginia DeGiorgi,

Naval Research Lab,

United States

Yucheng Liu,

Mississippi State

University, United States

Jose Teixeira,

University of Minho,

Portugal

Tien-Chien Jen,

University of

Johannesburg, South Africa

Hua Wang,

Shanghai Jiao Tong

University, China

Sriharsha Srinivas Sundarram,

Faireld

University, United States

Germanico Gonzalez-Badillo,

Universidad Autonoma De San Luis

Potosi, Mexico

TRACK 2

ADVANCED MANUFACTURING

WEDNESDAY, NOVEMBER 14

2-1 ADVANCED MANUFACTURING

PLENARY

2-1-1 Advanced Manufacturing Plenary

Third Floor, David L. Lawrence Convention Center, Room 305

9:00am–9:45am

9:00am – Manufacturing for X

Plenary Presentation. IMECE2018-90091

Jian Cao,

Northwestern University, Evanston, IL, United States

2-2 CONGRESS-WIDE SYMPOSIUM ON

ADDITIVE MANUFACTURING

2-2-1 Congress-Wide Symposium on Additive

Manufacturing: Metals-Directed Energy Deposition I

Third Floor, David L. Lawrence Convention Center, Room 301

10:00am–11:45am

Session Chair: Scott Thompson,

Auburn University, Auburn,

AL, United States

Session Co-Chairs: Nima Shamsaei,

Auburn University,

Auburn, AL, United States,

Roozbeh (Ross) Salary,

Marshall

University, Huntington, WV, United States

10:00am – Thermal-Mechanical Study of 3D Printing

Technology for Rail Repair

Technical Paper Publication. IMECE2018-86315

Ershad Mortazavian, Zhiyong Wang,

University of Nevada,

Las Vegas, Las Vegas, NV, United States,

Hualiang Teng,

University of Nevada, Las Vegas, Henderson, NV, United States

10:21am – Additive Manufacturing Bead Deposition Based

Rotary Tool Path Applications

Technical Paper Publication. IMECE2018-86461

Ruth Jill Urbanic,

University of Windsor, La Salle, ON,

Canada,

Robert Hedrick,

CAMufacturing Solutions Inc., La

Salle, ON, Canada

10:42am – Directed Energy Deposition of Magnetic Shape

Memory Alloy Ni-Mn-Ga: Towards Epitaxial Growth

Technical Presentation. IMECE2018-87160

Jakub Toman,

University of Pittsburgh, Pittsburgh, PA, United

States,

Peter Müllner,

Boise State University, Boise, ID, United

States,

Markus Chmielus,

University of Pittsburgh, Pittsburgh,

PA, United States

11:03am – ODS Coating for Critical Turbine Components

Using DED Additive Manufacturing

Technical Paper Publication. IMECE2018-87512

Eric Chia, Bruce Kang,

West Virginia University, Morgantown,

WV, United States,

Zheng Min,

University of Pittsburgh,

Wexford, PA, United States,

Yang Li, Minking Chyu,

University

of Pittsburgh, Pittsburgh, PA, United States

11:24am – Effect of Welding Mode on Microstructure and

Mechanical Properties of Aluminum Fabricated by Wire and

Arc Additive Manufacturing

Technical Presentation. IMECE2018-88703

Xuewei Fang, Lijuan Zhang, Bingheng Lu,

Xi’An Jiaotong

University, Xi’an, China

2-5 MANUFACTURING OF ATOMICALLY-

THIN, TWO-DIMENSIONAL MATERIALS

2-5-1 Mechanics and Physics of 2D Materials

Third Floor, David L. Lawrence Convention Center, Room 304

10:00am–11:45am

Session Chair: Pilgyu Kang,

George Mason University, Fairfax,

VA, United States

Session Co-Chairs: SungWoo Nam,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States,

Mike Cai Wang,

University of South Florida, Tampa, FL, United States

10:00am – Large-Area Solution-Manufactured Air-Stable 2D

Material for High-Performance Electronics and Smart

Sensors

Invited Presentation. IMECE2018-86603

Wenzhuo Wu,

Purdue University, West Lafayette, IN, United

States

10:42am – Large-Scale Nano-Manufacturing of Highly-

Uniform 0D/1D/2D Heterostructures via Self-Assembly

Technical Presentation. IMECE2018-89830

Michael Cai Wang,

University of South Florida, Tampa, FL,

United States,

Matthew Thomas Gole, Juyoung Leem,

Wayne Lin, Rachel Ziran Zhou, Paolo Furlanetto Ferrari,

Arend van der Zande, Catherine Jones Murphy, SungWoo

Nam,

University of Illinois at Urbana-Champaign, Urbana, IL,

United States

11:03am – Spatial Nanomechanical Mapping of Graphene

Monolayers on Crystalline Substrates

Technical Presentation. IMECE2018-89489

Matt Robertson, Kaihao Zhang, Matt Poss, Sameh Tawﬁck,

University of Illinois at Urbana-Champaign, Urbana, IL, United

States

11:24am – Anomalous Corrosion Dynamics of Two-

Dimensional (2D) Layered Materials

Technical Presentation. IMECE2018-89856

Yu-ting Huang,

Honk Kong University, Pok Fu Lam, Hong

Kong, Hong Kong,

Akhil Dodda,

Pennsylvania State University,

State College, PA, United States,

Amritanand Sebastian,

Pennsylvania State University, University Park, PA, United

States,

Daniel Schulman,

Penn State University, University

Park, PA, United States,

Saptarshi Das,

Pennsylvania State

University, State College, PA, United States

TRACK  ADVANCED MANUFACTURING

–

WEDNESDAY, NOVEMBER 

2-6 ADVANCED MACHINING AND

FINISHING

2-6-1 Advanced Surface Modication Using

Machining

Third Floor, David L. Lawrence Convention Center, Room 305

10:00am–11:45am

Session Chair: Pawan Tyagi,

University of the District of

Columbia, Washington, DC, United States

Session Co-Chair: Muhammad Jahan,

Miami University,

Oxford, OH, United States

10:00am – Study on Grinding Force and Surface Roughness

of Ni3Al Based Superalloy

Technical Paper Publication. IMECE2018-86959

Xiaoxiang Zhu, Wenhu Wang, Ruisong Jiang, Xiaofen Liu,

Northwestern Polytechnical University, Xi’an, Shaanxi, China

10:21am – Scanning Electron Microscopy and Optical

Proﬁlometry of Electropolished Additively Manufactured

316 Steel Components

Technical Paper Publication. IMECE2018-88339

Pawan Tyagi, Tobias Goulet, Denikka Brent,

University

of the District of Columbia, Washington, DC, United States,

Francisco Garcia-Moreno,

Department of Energy’s National

Security Campus, managed by Honeywell, Kansas City, MO,

United States,

Kate Klein,

University of the District of

Columbia, Washington, DC, United States

10:42am – Chemical Polishing Based Surface Finishing of

3D Printed Steel Components

Technical Paper Publication. IMECE2018-88378

Pawan Tyagi, Tobias Goulet, Nitt Chuenprateep, Robert

Stephenson, Rudolph Knott, Antione Reddick,

University of

the District of Columbia, Washington, DC, United States,

Justin

Schlitzer, Francisco Garcia-Moreno, Cordell Benton, Kansas

City National Security Campus, managed by Honeywell,

Kansas City, MO, United States,

Devdas Shetty, University of

the District of Columbia, Washington, DC, United States

11:03am – Improved Mechanical Properties and

Hierarchical Surfaces of 316 Stainless Steel Processed by

Ultrasonic Nanocrystal Surface Modiﬁcation

Technical Presentation. IMECE2018-89950

Xiaoning Hou, Jun Liu, Hao Zhang, Gary Doll,

University of

Akron, Akron, OH, United States,

Ashlie Martini,

University of

California -Merced, Atwater, CA, United States, Yalin Dong,

University of Akron, Akron, OH, United States,

Chang Ye,

University of Akron, Peninsula, OH, United States

11:24am – Inﬂuence of Surface Pretreatment on the

Hydrophobic Silane Coating on AISI 304 Steel

Technical Paper Publication. IMECE2018-86256

Akinsanya Damilare Baruwa,

University of Johannesburg,

Johannesburg, Gauteng, South Africa,

Oluseyi Philip Oladijo,

Botswana International University of Science and Technology,

Palapye, Palapye, Botswana,

Nthabiseng Maledi,

University of

the Witwatersrand, Johannesburg, Gauteng, South Africa,

Esther Akinlabi, U

niversity of Johannesburg, Johannesburg,

South Africa

2-13 ROBOTICS & AUTOMATION IN

ADVANCED MANUFACTURING

2-13-1 Congress-Wide Symposium on Additive

Manufacturing: Robotic Additive Manufacturing

Third Floor, David L. Lawrence Convention Center, Room 302

10:00am–11:45am

Session Chair: Daniel Cox,

Georgia Southern University,

Statesboro, GA, United States

Session Co-Chair: Andrzej Nycz,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States

10:00am – High-Throughput 3D Metal Printing

Technical Presentation. IMECE2018-87216

Michael R. Sullivan, Deborah D.L. Chung,

University at

Buffalo, State University of New York, Buffalo, NY, United

States

10:21am – The Effects of Direct Energy Deposition

Processes on the Thermal Properties of Invar

Technical Presentation. IMECE2018-89770

Alex Arbogast,

Oak Ridge National Laboratory, Knoxville, TN,

United States,

Mark W. Noakes, Christopher Masuo, Andrzej

Nycz,

Oak Ridge National Laboratory, Oak Ridge, TN, United

States

10:42am – Weld Pool and Bead Characterization for Gravity

Aligned (GA) and Non-Gravity Aligned (NGA) Wire-Arc

Additive Manufacturing

Technical Presentation. IMECE2018-89787

Joshua Penney, William Hamel, J.L. McNeil,

University of

Tennessee, Knoxville, TN, United States

11:03am – A Framework for Path Planning of Large Scale

Additive Metals Manufacturing in Arbitrary Directions

Technical Presentation. IMECE2018-89824

James McNeil, William Hamel, Josh Penney,

University of

Tennessee, Knoxville, TN, United States

11:24am – Effect of Shielding Gas on Metal Big Area

Additive Manufacturing

Technical Presentation. IMECE2018-89723

Bishal Silwal,

Georgia Southern University, Statesboro, GA,

United States,

Andrzej Nycz, Mark W. Noakes, Christopher

Masuo,

Oak Ridge National Laboratory, Oak Ridge, TN, United

States,

Derek Vaughan,

University of Purdue, West Lafayette,

IN, United States,

David Marsh,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States

TRACK  ADVANCED MANUFACTURING

–

WEDNESDAY, NOVEMBER 

2-14 LASER-BASED ADVANCED

MANUFACTURING AND MATERIALS

PROCESSING

2-14-1 Surface Modication based on Laser Peening

and Ablation

Third Floor, David L. Lawrence Convention Center, Room 306

10:00am–11:45am

Session Chair: Yeqing Wang,

Mississippi State University,

Mississippi State, MS, United States

Session Co-Chair: Chang Ye,

University of Akron, Peninsula,

OH, United States

10:00am – Ablation Characteristics of Nanosecond Laser

Pulsed Ablation of Aluminum

Technical Paper Publication. IMECE2018-87635

Yeqing Wang,

Mississippi State University, Mississippi State,

MS, United States,

Daniel Diaz, David Hahn,

University of

Florida, Gainesville, FL, United States

10:21am – Improvement of Fatigue Life of Tool Steel by

Laser Shock Peening

Technical Presentation. IMECE2018-88868

Sachin Patil,

Bharat Forge Ltd., Pune, Maharashtra, India

10:42am – Microstructure Evolution in Ti64 Subjected to

Laser-Assisted Ultrasonic Nanocrystal Surface

Modiﬁcation

Technical Presentation. IMECE2018-89553

Jun Liu,

University of Akron, Akron, OH, United States, Sergey

Suslov, Qatar Environment and Energy Research Institute,

Doha, Qatar,

Zhencheng Ren, Yalin Dong,

University of Akron,

Akron, OH, United States,

Chang Ye,

University of Akron,

Peninsula, OH, United States

11:03am – The Effects of Laser Shock Peening on the

Mechanical Properties and Biomedical Behavior of AZ31B

Magnesium Alloy

Technical Presentation. IMECE2018-89781

Chang Ye,

University of Akron, Peninsula, OH, United States,

Ruixia Zhang,

University of Akron, Akron, OH, United States,

Xianfeng Zhou,

Qingdao University of Science and

Engineering, Qingdao, China,

Hongyu Gao,

Saarland

University, Saarbrücken, Germany,

Steven Mankoci,

University

of Akron, Akron, OH, United States,

Yang Liu,

North Carolina

State University, Raleigh, NC, United States,

Xiahan Sang,

Center for Nanophase Materials Sciences, ORNL, Oak Ridge,

TN, United States,

Haifeng Qin, Xiaoning Hou, Zhencheng

Ren, Gary Doll,

University of Akron, Akron, OH, United States,

Ashlie Martini,

University of California-Merced, Atwater, CA,

United States,

Yalin Dong, Nita Sahai,

University of Akron,

Akron, OH, United States

11:24am – Effect of Electron Beam Weld Bead Geometry on

the Mechanical Properties of Ti6Al4V Alloy

Technical Presentation. IMECE2018-88866

Sandeep Thakare,

Kalyani Centre for Technology and

Innovation, Bharat Forge Ltd., Pune, Maharashtra, India

2-15 DIGITAL MANUFACTURING

SIMULATION AND VALIDATION

2-15-1 Digital Manufacturing in Cyber-

Manufacturing Aspects

Third Floor, David L. Lawrence Convention Center, Room 303

10:00am–11:45am

Session Chair: David Guerra-Zubiaga,

Kennesaw State

University, Marietta, GA, United States

Session Co-Chair: Kai He,

Shenzhen Institutes of Advanced

Technology, Chinese Academy of Sciences, China,

Shenzhen,

China, Germanico Gonzalez-Badillo,

Universidad Autonoma de

San Luis Potosi, Rioverde San Luis Potosi, Mexico

10:00am – Taxonomy for Secure CyberManufacturing

Systems

Technical Paper Publication. IMECE2018-86091

Mingtao Wu,

Syracuse University, Fayetteville, NY, United

States,

Young Moon,

Syracuse University, Syracuse, NY,

United States

10:21am – A Novel Framework in Manufacturing

Automation to Implement Cyber-Manufacturing Systems

Technical Paper Publication. IMECE2018-88243

David Guerra-Zubiaga,

Kennesaw State University, Marietta,

GA, United States,

Kathy Schwaig,

Kennesaw State

University, Kennesaw, GA, United States,

Mason Felix, John

Calfee, Aubrey Sims,

Kennesaw State University, Marietta,

GA, United States,

Tu Vo,

Kennesaw State University,

Kennesaw, GA, United States

10:42am – CyberManufacturing System: A Solution for

Sustainable Manufacturing

Technical Paper Publication. IMECE2018-86092

Zhengyi Song, Young Moon,

Syracuse University, Syracuse,

NY, United States

11:03am – An Internet-of-Things Based Framework for

Collaborative Cyber Physical Tasks in Micro Assembly

Technical Paper Publication. IMECE2018-88542

J. Cecil, Aaron Cecil-Xavier, Sadiq Albuhamood,

Oklahoma

State University, Stillwater, OK, United States

11:24am – A New Design of Cycloidal Planetary Reducer

With Internal Cycloidal Proﬁle

Technical Paper Publication. IMECE2018-86184

He Mao, Guanyi Liu, Deqiang Zeng, Yaning Cao, Kai He,

Shenzhen Institutes of Advanced Technology, Chinese

Academy of Sciences, Shenzhen, China,

Ruxu Du,

Chinese

University of Hong Kong, Hong Kong, Hong Kong

TRACK  ADVANCED MANUFACTURING

–

WEDNESDAY, NOVEMBER 

2-2 CONGRESS-WIDE SYMPOSIUM ON

ADDITIVE MANUFACTURING

2-2-2 Congress-Wide Symposium on Additive

Manufacturing: Metals-Directed Energy Deposition II

Third Floor, David L. Lawrence Convention Center, Room 301

1:45pm–3:30pm

Session Chair: Scott Thompson,

Auburn University, Auburn,

AL, United States

Session Co-Chairs: Nima Shamsaei,

Auburn University,

Auburn, AL, United States,

Ruth Jill Urbanic,

University of

Windsor, La Salle, ON, Canada

1:45pm – Application of Electrostatic Adhesion Method in

Metal-Powder-Based Additive Manufacturing Layer-

Forming Process

Technical Paper Publication. IMECE2018-88741

Teng-Yueh Tsao, Jen-Yuan (James) Chang,

National Tsing

Hua University, Hsinchu, Hsinchu, Taiwan

2:27pm – Meshfree Simulation of Oxide Dispersion in

Solid-State Additive Manufacturing of Aluminum Alloys

Technical Presentation. IMECE2018-89026

Robert Escobar Jr.,

University of Alabama, Tuscaloosa, AL,

United States,

Kirk Fraser,

National Research Council Canada,

Saguenay, QC, Canada,

J.B. Jordon, Paul Allison,

University

of Alabama, Tuscaloosa, AL, United States

2:48pm – Application of a Fast-Solving Semi-Analytical

Heat Transfer Model to Additive Manufacturing Alloy

Development

Technical Presentation. IMECE2018-89880

Nicholas Jones, Jack Beuth, Bryan Webler, Yining He,

Carnegie Mellon University, Pittsburgh, PA, United States

3:09pm – A Computational Fluid Dynamics (CFD) Study of

Material Transport and Deposition in Aerosol Jet Printing

(AJP) Process

Technical Paper Publication. IMECE2018-87647

Roozbeh (Ross) Salary,

Marshall University, Huntington, WV,

United States,

Jack P. Lombardi III, Darshana L.

Weerawarne,

State University of New York at Binghamton,

Vestal, NY, United States,

Prahalad Rao,

University of

Nebraska–Lincoln, Lincoln, NE, United States,

Mark D. Poliks,

State University of New York at Binghamton, Vestal, NY, United

States

2-5 MANUFACTURING OF ATOMICALLY-

THIN, TWO-DIMENSIONAL MATERIALS

2-5-2 Sensors and Electronics of 2D Materials

Third Floor, David L. Lawrence Convention Center, Room 304

1:45pm–3:30pm

Session Chair: Pilgyu Kang,

George Mason University, Fairfax,

VA, United States

Session Co-Chairs: Mike Cai Wang,

University of South

Florida, Tampa, FL, United States,

SungWoo Nam,

University of

Illinois at Urbana-Champaign, Urbana, IL, United States

1:45pm – 2D Materials Based Epidermal and Implantable

Conformal Bioelectronics

Invited Presentation. IMECE2018-89975

Nanshu Lu,

University of Texas at Austin, Austin, TX, United

States

2:27pm – Air Stable Black Phosphourus Sensors for

Humidity Detection

Technical Presentation. IMECE2018-89891

Jinshui Miao, Junghoon Yeom,

Michigan State University,

East Lansing, MI, United States,

Chuan Wang,

Washington

University in St. Louis, St. Louis, MO, United States

2:48pm – Crumple Nanostructuring of Atomically-Thin

Two-Dimensional (2D) Materials for Flexible Optoelectronic

Devices and Plasmonic Metamaterials

Technical Presentation. IMECE2018-89943

Pilgyu Kang,

George Mason University, Fairfax, VA, United

States

2-6 ADVANCED MACHINING AND

FINISHING

2-6-2 Conventional Machining

Third Floor, David L. Lawrence Convention Center, Room 305

1:45pm–3:30pm

Session Chair: Lewis Payton,

Auburn University, Auburn

University, AL, United States

Session Co-Chair: P.V.M. Rao,

IIT Delhi, New Delhi, India

1:45pm – Determining Cutting Pressure Coefﬁcients for

Aluminum 6061-T6 Using a Small Number of Drilling

Experiments

Technical Paper Publication. IMECE2018-86224

Charbel Seif,

American University of Beirut, Beirut, Lebanon,

Ilige Hage,

Notre Dame University-Louaize, Zouk Mosbeh,

Lebanon,

Ramsey Hamade,

American University of Beirut,

Beirut, Riad El Solh, Lebanon

2:06pm – Dislocation Theory of Orthogonal Metal Cutting of

Cu-Zn Alloys

Technical Paper Publication. IMECE2018-87634

Lewis Payton,

Auburn University, Auburn University, AL,

United States

TRACK  ADVANCED MANUFACTURING

–

WEDNESDAY, NOVEMBER 

2:27pm – Study on Turning of Non-Axisymmetric Three-

Dimensional Curved Surfaces

Technical Paper Publication. IMECE2018-87377

Taichi Mori, Yoshitaka Morimoto, Akio Hayashi,

Kanazawa

Institute of Technology, Nonoichi, Isikawa, Japan,

Yoshiyuki

Kaneko, Naohiko Suzuki, Ryo Hirono,

Takamatsu Machinery

Co., Ltd., Isikawa, Isikawa, Japan

2:48pm – Orthogonal Machining of Copper Alloy with a

Hardness Gradient

Technical Paper Publication. IMECE2018-87524

Lewis Payton,

Auburn University, Auburn University, AL,

United States

3:09pm – Process Planning Strategies to Reduce Energy

Consumption in Machining

Technical Paper Publication. IMECE2018-87735

Arun Unnikrishnan,

P.V.M. Rao, IIT Delhi, New Delhi, India

2-13 ROBOTICS & AUTOMATION IN

ADVANCED MANUFACTURING

2-13-2 Manipulators and Interfaces

Third Floor, David L. Lawrence Convention Center, Room 302

1:45pm–3:30pm

Session Chair: Daniel Cox,

Georgia Southern University,

Statesboro, GA, United States

Session Co-Chair: Andrzej Nycz,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States

1:45pm – Additive Manufacturing-Based Manipulator

Design, Fabrication, and Testing

Technical Presentation. IMECE2018-89800

Mark W. Noakes, Bradley S. Richardson,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States

2:06pm – VR-Mediated Teleoperation With Glove-Like

Interfaces

Technical Paper Publication. IMECE2018-87085

Kun Chen,

Prawesh Dahal, Mariam Avagyan, Kevin Huang,

Trinity College, Hartford, CT, United States

2:27pm – Torch End-Effector and TIG Electrode Changeout

Design for a TIG Welding Robot Used in Metal Big Area

Additive Manufacturing

Technical Paper Publication. IMECE2018-86726

Christopher Masuo, Andrzej Nycz, Mark W. Noakes,

Oak

Ridge National Laboratory, Oak Ridge, TN, United States,

Jared Bell, Justin Killian, Chandler Oakley, William Hamel,

University of Tennessee, Knoxville, TN, United States

2:48pm – Welding Robotic Co-Worker Using Brain

Computer Interface

Technical Paper Publication. IMECE2018-87503

Yao Li,

University of Illinois at Urbana-Champaign, Urbana, IL,

United States,

T. Kesavadas,

University of Illinois Urbana-

Champaign, Mahomet, IL, United States

3:09pm – Intelligent Decision Making Approach for Performance

Evaluation of a Robot-Based Manufacturing Cell

Technical Paper Publication. IMECE2018-86666

Tavo Kangru,

Tallinn University of Technology, Tallinn, Estonia,

Jüri Riives,

Innovative Manufacturing Engineering Systems

Competence Centre, Tallinn, Estonia,

Tauno Otto, Meelis

Pohlak, Kashif Mahmood,

Tallinn University of Technology,

Tallinn, Estonia

2-15 DIGITAL MANUFACTURING

SIMULATION AND VALIDATION

2-15-2 Digital Manufacturing in Digital Twin Aspects

Third Floor, David L. Lawrence Convention Center, Room 303

1:45pm–3:30pm

Session Chair: Germanico Gonzalez-Badillo,

Universidad

Autonoma De San Luis Potosi, Rioverde San Luis Potosi, Mexico

Session Co-Chairs: Kai He,

Shenzhen Institutes of Advanced

Technology, Chinese Academy of Sciences, China, Shenzhen,

China,

David Guerra-Zubiaga,

Kennesaw State University,

Marietta, GA, United States

1:45pm – Demonstration of an Industrial Framework for an

Implementation of a Process Digital Twin

Technical Paper Publication. IMECE2018-87361

J.M. Eyre,

Advanced Manufacturing Research Centre,

Shefeld, Yorkshire, United Kingdom,

T.J. Dodd,

University

of Shefeld, Shefeld, United Kingdom,

C. Freeman,

R. Lanyon-Hogg, A.J. Lockwood, R.W. Scott,

Advanced

Manufacturing Research Centre, Shefeld, United Kingdom

2:06pm – Towards a Digital Twin for Cloud Manufacturing:

Case Study

Technical Paper Publication. IMECE2018-87688

Diane Ngo,

Kennesaw State University, Marietta, GA, United

States,

Reza Vatankhah-Barenji,

Hacettepe University,

Ankara, Turkey,

Germanico Gonzalez-Badillo,

Universidad

Autonoma de San Luis Potosi, Rioverde San Luis Potosi,

Mexico,

David Guerra-Zubiaga,

Kennesaw State University,

Marietta, GA, United States

2:27pm – Virtual Experimental Investigation for Industrial

Robotics in Gazebo Environment

Technical Paper Publication. IMECE2018-87686

Mur

at Aksu, Frederick Proctor, John Michaloski,

The National

Institute of Standards and Technology, Gaithersburg, MD, United

States

2:48pm – A Digital Twin Concept for Manufacturing

Systems

Technical Paper Publication. IMECE2018-87737

Wesley Ellgass,

Kennesaw State University, Kennesaw, GA,

United States,

Ali Vatankhah-Barenji,

Guangdong University

of Technology, Guangzhou, China,

Hector S. Lemus, Nathan

Holt,

Kennesaw State University, Kennesaw, GA, United

States,

Julian Richmond,

Kennesaw State University

Marietta, GA, United States,

Germanico Gonzalez-Badillo,

Universidad Autonoma de San Luis Potosi, Riover

Potosi, Mexico

TRACK  ADVANCED MANUFACTURING

–

WEDNESDAY, NOVEMBER 

3:09pm – Digital Twin Using Siemens PLCs and PLM

Software: A Manufacturing Material System Case Study

Technical Presentation. IMECE2018-87772

David Guerra-Zubiaga, Steven Moser, Michael Fyfe,

Kennesaw State University, Marietta, GA, United States,

Sebastien Desarzens, Donato Laurent,

Fribourg University,

Fribourg, Switzerland

2-2 CONGRESS-WIDE SYMPOSIUM ON

ADDITIVE MANUFACTURING

2-2-3 Congress-Wide Symposium on Additive

Manufacturing: Metals – Powder Bed Fusion I

Third Floor, David L. Lawrence Convention Center, Room 301

3:45pm–5:09pm

Session Chair: Scott Thompson,

Auburn University, Auburn,

AL, United States

Session Co-Chair: Nima Shamsaei,

Auburn University,

Auburn, AL, United States

3:45pm – Utilizing Advanced Manufacturing Technologies

to Develop a Reconﬁgurable Lumbar Puncture Training

Model

Technical Paper Publication. IMECE2018-86851

Besim Kalajdzic,

University of Windsor, Windsor, ON, Canada,

Ruth Jill Urbanic,

University of Windsor, La Salle, ON,

Canada,

Andre Khayat, Anna Farias,

University of Windsor,

Windsor, ON, Canada

4:06pm – Porosity Analysis in Metal Additive Manufacturing

by Micro-CT

Technical Paper Publication. IMECE2018-87897

Subin Shrestha, Thomas Starr, Kevin Chou,

University of

Louisville, Louisville, KY, United States

4:27pm – Comparison of Louvered Plate-Fin Heat

Exchangers Made via Additive Manufacturing

Technical Paper Publication. IMECE2018-87941

Michael Bichnevicius, David Saltzman, Stephen Lynch,

Pennsylvania State University, University Park, PA, United

States

4:48pm – Optimize Additive Manufacturing Post-Build Heat

Treatment and Hot Iso-Static Pressing Process Using an

Integrated Computational Materials Engineering

Framework

Technical Paper Publication. IMECE2018-88550

Anahita Imanian, Kelvin Leung, Nagaraja Iyyer

Technical

Data Analysis, Falls Church, VA, United States,

Derek H.

Warner, Peipei Li,

Cornell University, Ithaca, NY, United States

2-5 MANUFACTURING OF ATOMICALLY-

THIN, TWO-DIMENSIONAL MATERIALS

2-5-3 Synthesis and Processing of 2D Materials

Third Floor, David L. Lawrence Convention Center, Room 304

3:45pm–5:30pm

Session Chair: Pilgyu Kang,

George Mason University, Fairfax,

VA, United States

Session Co-Chairs: SungWoo Nam,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States,

Mike Cai Wang,

University of South Florida, Tampa, FL, United States

3:45pm – Electrochemical Polishing of Large Area Two-

Dimensional Materials Grown by Physical Vapor Transport

Technical Presentation. IMECE2018-89854

Amritanand Sebastian,

Pennsylvania State University,

University Park, PA, United States,

Akhil Dodda,

Pennsylvania

State University, State College, PA, United States,

Daniel

Schulman,

Pennsylvania State University, University Park, PA,

United States,

Saptarshi Das,

Pennsylvania State University,

State College, PA, United States

4:06pm – Strengthening and Toughening of Thin Metal

Leaves by Graphene Synthesis

Technical Presentation. IMECE2018-89512

Kaihao Zhang, Sameh Tawﬁck,

University of Illinois at Urbana

Champaign, Urbana, IL, United States

4:27pm – Roll-to-Roll Plasma Chemical Vapor Deposition

for Scalable Nanomanufacturing of Graphene

Technical Presentation. IMECE2018-86382

Majed Alrefae,

Purdue University, West Lafayette, IN, United

States,

Timothy Fisher,

University of California, Los Angeles,

Los Angeles, CA, United States

4:48pm – Large-Scale Dynamic Energy Driven Assembly of

Two-Dimensional Layered Materials on Polymer Substrate

Technical Presentation. IMECE2018-88881

Dong Zhou, Bo Li,

Villanova University, Villanova, PA, United

States

5:09pm – Analysis of Multilayered Copper/Nickel/Titanium

Deposited Aluminum Alloys Using Electrochemical Process

Technical Presentation. IMECE2018-88889

Mohammad Asaduzzaman Chowdhury,

Dhaka University of

Engineering & Technology, Gazipur, Gazipur, Bangladesh,

Bengir Ahmed Shuvho,

Dhaka University of Engineering &

Technology, Dhaka, Bangladesh,

Uttam Kumar Debnath,

Rajib Nandee,

Dhaka University of Engineering & Technology,

Gazipur, Gazipur, Gazipur, Bangladesh,

Suman Das,

University

of Saskatchewan, Saskatchewan, SK, Canada,

Mohi Uddin

Ahmed,

Dhaka University of Engineering & Technology,

Gazipur, Bangladesh,

Atiqur Rahman,

Bangladesh Road

Transport Authority, Dhaka, Bangladesh

TRACK  ADVANCED MANUFACTURING

–

WEDNESDAY, NOVEMBER 

2-13 ROBOTICS & AUTOMATION IN

ADVANCED MANUFACTURING

2-13-3 Algorithms and Optimization

Third Floor, David L. Lawrence Convention Center, Room 302

3:45pm–5:30pm

Session Chair: Daniel Cox,

Georgia Southern University,

Statesboro, GA, United States

Session Co-Chair: Andrzej Nycz,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States

3:45pm – Efﬁcient Feedrate Optimization Method for Spline

Toolpath With Curvature-Base Planning and Accurate

Interpolating

Technical Paper Publication. IMECE2018-86162

Yong Zhang, Mingyong Zhao, Peiqing Ye, T

singhua, Beijing,

China,

Jiali Jiang,

China University of Mining & Technology,

Beijing, China,

Hui Zhang,

Tsinghua, Beijing, China

4:06pm – Adaptive Industrial Robots Using Machine Vision

Technical Paper Publication. IMECE2018-86720

Vladimir Kuts, Tauno Otto, Toivo Tähemaa, Khuldoon

Bukhari, Tengiz Pataraia,

Tallinn University of Technology,

Tallinn, Harju, Estonia

4:27pm – A Collision-Free Motion Planning Approach for

Parallel Manipulator Assembly Based on Machine Vision

Technical Presentation. IMECE2018-88784

Haodong Chen,

Hefei University of Technology, Hefei, China,

Zheng Guo,

Shanghai Jiao Tong University, Shanghai, China,

Yifan Wang, Ping Zhao,

Hefei University of Technology, Hefei,

China

4:48pm – Graphically Manipulating Procedurally Generated

G-Code

Technical Presentation. IMECE2018-89740

Steven Patrick,

Oak Ridge National Labratory, Knoxville, TN,

United States,

Andrzej Nycz, Mark W. Noakes,

Oak Ridge

National Laboratory, Oak Ridge, TN, United States

5:09pm – Control of Continuous Polymer Compounding

Fuse Filament Modeling

Technical Paper Publication. IMECE2018-87114

Connor Armstrong, Thomas Carlacci, David Bigio,

University of Maryland, College Park, MD, United States

2-14 LASER-BASED ADVANCED

MANUFACTURING AND MATERIALS

PROCESSING

2-14-2 Laser-Matter Interaction and Its Applications

in Materials Processing

Third Floor, David L. Lawrence Convention Center, Room 305

3:45pm–5:30pm

Session Chair: Leila Ladani,

University of Texas at Arlington,

Arlington, TX, United States

Session Co-Chair: Sriharsha Srinivas Sundarram,

Faireld

University, Faireld, CT, United States

3:45pm – Multi-Physics Modeling of Laser Interaction With

Surface in Powder Bed Melting Process

Technical Paper Publication. IMECE2018-86566

Faiyaz Ahsan,

University of Texas at Arlington, Arlington, TX,

United States,

Jafar Razmi,

University of Texas at Arlington,

Fort Worth, TX, United States,

Leila Ladani,

University of Texas

at Arlington, Arlington, TX, United States

4:06pm – Laser Triggered Alloying of Al-Shell/Ni-Core

Energetic Nanoparticle: A Molecular Dynamics Study

Technical Paper Publication. IMECE2018-86942

Pengfei Ji, Mengzhe He, Yiming Rong,

Southern University

of Science and Technology, Shenzhen, Guangdong, China,

Yuwen Zhang,

University of Missouri, Columbia, MO, United

States,

Yong Tang,

South China University of Technology,

Guangzhou, Guangdong, China

4:27pm – Simulation and Characterization of 3D Shape

Optical Fiber Sensors Fabricated by Femtosecond Laser

Technical Presentation. IMECE2018-88130

Seunghwan Jo, Hang-Eun Joe, Anmol Guram, Martin Jun,

Purdue University, West Lafayette, IN, United States

4:48pm – Laser Foaming of Polyetherimide (PEI)

Technical Paper Publication. IMECE2018-88623

Sriharsha Srinivas Sundarram, Venkateshwarlu Kakumanu,

Faireld University, Faireld, CT, United States

5:09pm – Synthesis of Molybdenum-Doped TiO

by Laser

Ablation in Precursor Solution

Technical Presentation. IMECE2018-89687

Mustafa Mozael,

Rutgers University, New Brunswick, NJ,

United States,

Stephen Tse, Bernard Kear,

Rutgers, The State

University of New Jersey, Piscataway, NJ, United States

TRACK  ADVANCED MANUFACTURING

–

WEDNESDAY, NOVEMBER 

2-15 DIGITAL MANUFACTURING

SIMULATION AND VALIDATION

2-15-3 Digital Manufacturing in Industry 4.0 Aspects

Third Floor, David L. Lawrence Convention Center, Room 303

3:45pm–5:30pm

Session Chair: Kai He,

Shenzhen Institutes of Advanced

Technology, Chinese Academy of Sciences, China, Shenzhen,

China

Session Co-Chairs: Germanico Gonzalez-Badillo,

Universidad

Autonoma de San Luis Potosi, Rioverde San Luis Potosi,

Mexico,

David Guerra-Zubiaga,

Kennesaw State University,

Marietta, GA, United States

3:45pm – Digital Factory: Simulation Enhancing Production

and Engineering Process

Technical Paper Publication. IMECE2018-88334

Angella Thomas, John Cohran III, David Guerra-Zubiaga,

Kennesaw State University, Marietta, GA, United States

4:06pm – A Novel Modeling Approach for Solving the Cell

Formation Problem

Technical Paper Publication. IMECE2018-88128

Taras Dmytryshyn, Mohamed Ismail,

University of Regina,

Regina, SK, Canada,

Ola Rashwan,

Pennsylvania State

University, Middletown, PA, United States

4:27pm – Research on the Integrated Optimization for Path

Planning of Transfer Robots and Production Scheduling of

Flexible Job Shops

Technical Presentation. IMECE2018-86759

Xixing Li,

Hubei University of Technology, Wuhan, Hubei,

China,

Baigang Du,

Wuhan University of Technology, Wuhan,

Hubei, China

4:48pm – Internet of Things in Manufacturing: An Overview

Technical Paper Publication. IMECE2018-88262

Hussam Alothman,

Binghamton University, Johnston City, NY,

United States,

Mohammad Khasawneh, Nagen Nagarur,

Binghamton University, Binghamton, NY, United States

5:09pm – AI Based Monitoring and Control of Injection

Molding Process for Consistent Product Quality

Technical Presentation. IMECE2018-89531

Hong Seok Park, Saurabh Kumar,

University of Ulsan, Ulsan,

Korea (Republic)

THURSDAY, NOVEMBER 15

2-2 CONGRESS-WIDE SYMPOSIUM ON

ADDITIVE MANUFACTURING

2-2-4 Congress-Wide Symposium on Additive

Manufacturing: Metals – Powder Bed Fusion II

Third Floor, David L. Lawrence Convention Center, Room 301

8:55am–10:40am

Session Chair: Scott Thompson,

Auburn University, Auburn,

AL, United States

Session Co-Chairs: Nima Shamsaei,

Auburn University,

Auburn, AL, United States,

Albert To,

University of Pittsburgh,

Pittsburgh, PA, United States

8:55am – Mitigating Near-Surface Porosity in a Laser

Powder Bed Fusion Process

Invited Presentation. IMECE2018-89768

Sneha Prabha Narra,

Worcester Polytechnic Institute,

Worcester, MA, United States,

Luke Scime, Jack Beuth,

Carnegie Mellon University, Pittsburgh, PA, United States

9:37am – Efﬁcient Optimization of Build Orientation and

Support Structure Design for Laser Powder Bed Additive

Manufacturing

Technical Presentation. IMECE2018-89493

Albert To, Lin Cheng, Qian Chen, Xuan Liang,

University of

Pittsburgh, Pittsburgh, PA, United States

9:58am – Microstructure Development After Thermal

Cycling by Adjacent Melt Pools in Ti-B Alloys

Technical Presentation. IMECE2018-89786

Yining He, Jack Beuth, Bryan Webler, Nicholas Jones,

Carnegie Mellon University, Pittsburgh, PA, United States

10:19am – Alloy Composition and Processing Changes to

Mitigate Melt Pool Balling Defects in Direct Metal Additive

Manufacturing

Technical Presentation. IMECE2018-89988

Jack Beuth, Debomita Basu, Zachary Francis, Nicholas

Jones, Bryan Webler,

Carnegie Mellon University, Pittsburgh,

PA, United States

2-4 NANOMANUFACTURING

2-4-1 Nanomanufacturing: Spray or Print Deposition

Techniques for Nanomaterials and Nanostructures

Third Floor, David L. Lawrence Convention Center, Room 304

8:55am–10:40am

Session Chair: Matt Maschmann,

University of Missouri,

Columbia, MO, United States

Session Co-Chair: Chih-Hao Chang,

North Carolina State

University, Raleigh, NC, United States

8:55am – Harnessing the Versatility of Carbon Nanotubes

as Printed Thin Films

Technical Presentation. IMECE2018-86495

Aaron Franklin,

Duke University

TRACK  ADVANCED MANUFACTURING

–

WEDNESDAY, NOVEMBER  / THURSDAY, NOVEMBER 

9:16am – Obtaining Thickness-Limited Electrospray

Deposition for 3D Coating

Technical Presentation. IMECE2018-88299

Lin Lei,

Rutgers University, Piscataway, NJ, United States,

Dylan Kovacevich,

Rutgers University, Belle Mead, NJ, United

States,

Michael P. Nitzsche,

Rutgers University, Piscataway,

NJ, United States,

Jihyun Ryu,

Drexel University, Piscataway,

NJ, United States,

Kutaiba Al-Marzoki,

Rutgers University,

Piscataway, NJ, United States,

Gabriela Rodriguez,

City

University of New York, Bronx, NY, United States,

Lisa C.

Klein,

Rutgers University, Piscataway, NJ, United States,

Andrei Jitianu,

City University of New York, Bronx, NY, United

States,

Jonathan Singer,

Rutgers University, Piscataway, NJ,

United States

9:37am – Geometric Effects on 3D Coating by Self-Limiting

Electrospray

Technical Presentation. IMECE2018-89649

Dylan Kovacevich,

Rutgers University, Belle Mead, NJ, United

States,

Lin Lei, Jonathan Singer,

Rutgers University,

Piscataway, NJ, United States

9:58am – Modeling Electrosprays: Millions of Charged

Drops Evaporating, Fissioning, and Depositing on a

Substrate

Technical Presentation. IMECE2018-89841

Marriner Merrill,

US Naval Research Laboratory, Washington,

DC, United States

2-6 ADVANCED MACHINING AND

FINISHING

2-6-3 Assisted Machining Techniques

Third Floor, David L. Lawrence Convention Center, Room 305

8:55am–10:40am

Session Chair: Sathish Kannan,

American University of

Sharjah, Sharjah, United Arab Emir.

Session Co-Chair: Chang Ye,

University of Akron, Peninsula,

OH, United States

8:55am – A Numerical Study to Investigate the Inﬂuence of

Edge Preparation in Vibration Assisted Machining

Technical Paper Publication. IMECE2018-87731

Salman Pervaiz,

Rochester Institute of Technology – Dubai

Campus, Dubai, United Arab Emir.,

Sathish Kannan,

American

University of Sharjah, Sharjah, United Arab Emir.,

Wael Samad,

Rochester Institute of Technology - Dubai Campus, Dubai,

United Arab Emir.

9:16am – Improving the Fretting and Corrosion Fatigue

Strength of 300M Ultra-High Strength Steel Using the

Ultrasonic Surface Rolling Process

Technical Presentation. IMECE2018-89765

Weidong Zhao,

University of Akron, Akron, OH, United States,

Chang Ye,

University of Akron, Peninsula, OH, United States,

Daoxin Liu, Xiaohua Zhang,

Northwestern Polytechnical

University, Xian, Shaanxi, China,

Ruixia Zhang, Hao Zhang,

University of Akron, Akron, OH, United States,

Ying Zhou,

INSA Rennes, Rennes, Bretagne, France

9:37am – Enhanced Plasticity for Metallic Glasses by

Electropulsing-Assisted Surface Severe Plastic

Deformation

Technical Presentation. IMECE2018-89780

Chi Ma,

University of Akron, Akron, OH, United States,

Sergey

Suslov,

Qatar Environment and Energy Research Institute,

Doha, Qatar,

Chang Ye,

University of Akron, Peninsula, OH,

United States,

Yalin Dong,

University of Akron, Akron, OH,

United States

9:58am – The Effects of Electrically-Assisted Ultrasonic

Nanocrystal Surface Modiﬁcation on 3D-Printed Ti-6Al-4V

Alloy

Technical Presentation. IMECE2018-89788

Hao Zhang, Jingyi Zhao, Jun Liu, Haifeng Qin, Zhencheng

Ren, Gary Doll,

University of Akron, Akron, OH, United States,

Yalin Dong,

University of Akron, Akron, OH, United States,

Chang Ye,

University of Akron, Peninsula, OH, United States

10:19am – Measuring Points Selection for Laser Tracker

Measurement of Five-Axis Machine Tool

Technical Paper Publication. IMECE2018-88314

Qingzhao Li, Wei Wang, Hai Li, Jing Zhang, Zhong Jiang,

University of Electronic Science and Technology of China,

ChengDu, China

2-8 ADVANCED MATERIAL FORMING

2-8-1 Novel Processes

Third Floor, David L. Lawrence Convention Center, Room 302

8:55am–10:40am

Session Chair: William Emblom,

University of Louisiana-

Lafayette, Lafayette, LA, United States

Session Co-Chair: Ihab Ragai,

Pennsylvania State University,

Behrend College, Erie, PA, United States

8:55am – Friction Stir Back Extrusion: Preliminary

Investigations on Through-Wall Characteristics for

AL-1100-O

Technical Paper Publication. IMECE2018-86318

William Emblom, Austin Menard, Clarissa Gallardo,

University of Louisiana at Lafayette, Lafayette, LA, United

States,

Clayton Loehn,

Louisiana State University, Baton

Rouge, LA, United States,

Ayotunde Olayinka,

University of

Louisiana at Lafayette, Lafayette, LA, United States,

Scott

Wagner,

Michigan Tech, Atlantic Mine, MI, United States,

Muhammad Wahab,

Louisiana State University, Baton Rouge,

LA, United States,

Daniel Seguin,

Michigan Technological

University, Houghton, MI, United States

9:16am – Effect of Process Parameters on the Electrically-

Assisted Sintered Iron-Copper Powder Metals

Technical Paper Publication. IMECE2018-86891

Ihab Ragai, Matt Schwabenbauer,

Pennsylvania State

University, Behrend College, Erie, PA, United States,

Seray Eser, Michael Müller,

Rosenheim University of Applied

Sciences, Rosenheim, Germany

TRACK  ADVANCED MANUFACTURING

–

THURSDAY, NOVEMBER 

9:37am – Mechanical Response and Grain Size Effects in

Microscale Reverse Extrusion of Copper

Technical Presentation. IMECE2018-87996

Bin Zhang, Yooseob Song, George Voyiadjis, Wen Meng,

Louisiana State University, Baton Rouge, LA, United States,

Kristian Juul, Kim L. Nielsen,

Technical University of

Denmark, Kgs. Lyngby, Denmark

9:58am – Electroplasticity Behavior of Mg AZ31B Subjected

To Electropulsing Assisted Tension

Technical Presentation. IMECE2018-89819

Chang Ye, University of Akron, Peninsula, OH, United States,

Zhencheng Ren, Jingyi Zhao, Jun Liu, Hao Zhang, Yalin

Dong,

University of Akron, Akron, OH, United States

10:19am – A Numerical Study on Rotational Tube Flaring

Process

Technical Paper Publication. IMECE2018-86918

Chetan Nikhare,

Pennsylvania State University, Erie, PA,

United States

2-11 COMPUTATIONAL MODELING AND

SIMULATION FOR ADVANCED

MANUFA

CTURING

2-11-1 Advanced Manufacturing Processes-Modeling

and Simulation I

Third Floor, David L. Lawrence Convention Center, Room 303

8:55am–10:40am

Session Chair: Virginia DeGiorgi,

Naval Research Laboratory,

Washington, DC, United States

Session Co-Chair: Yucheng Liu,

Mississippi State University,

Mississippi State, MS, United States

8:55am – Prediction of Residual Stress and Damage in

Thermal Spray Coatings Using Hybrid Computational

Approach

Technical Paper Publication. IMECE2018-86504

Abba Abubakar, Abul Fazal M. Arif, Khaled Al-Athel, Syed

Sohail Akhtar,

King Fahad University of Petroleum & Minerals,

Dhahran, Saudi Arabia

9:16am – Three-Dimensional Computational Modeling of

Microstructure Defects in Thermal Barrier Coatings

Technical Presentation. IMECE2018-88983

Stephanie Wimmer, Virginia DeGiorgi,

Naval Research

Laboratory, Washington, DC, United States,

John Drazin,

ASEE, Washington, DC, United States,

Edward Gorzkowski,

Naval Research Laboratory, Washington, DC, United States

9:37am – Modeling and Experimental Veriﬁcation of Torque

and Thrust Forces Generated by the Conventional Drill’s

Chisel Edge

Technical Paper Publication. IMECE2018-86155

Charbel Seif,

American University of Beirut, Beirut, Lebanon,

Ilige Hage,

Notre Dame University-Louaize, Zouk Mosbeh,

Lebanon,

Ramsey Hamade,

American University of Beirut,

Beirut, Riad El Solh, Lebanon

9:58am – Statistically Validated and Optimized Tabu Search

Estimation of Cutting Tool Life in Turning

Technical Paper Publication. IMECE2018-86232

Remi Hage, Ilige Hage, Chady Ghnatios,

Notre Dame

University-Louaize, Zouk Mosbeh, Lebanon,

Ramsey

Hamade,

American University of Beirut, Beirut, Riad El Solh,

Lebanon

10:19am – Flexible Fiber Motion in Fiber-Reinforced

Composite Material Processing

Technical Paper Publication. IMECE2018-86440

Diwei Zhang,

Prairie View A&M University, Cypress, TX, United

States,

Xiaobo Peng, Dongdong Zhang,

Prairie View A&M

University, Prairie View, TX, United States

2-12 VARIATION SIMULATION AND

DESIGN FOR ASSEMBLY

2-12-1 Variation Simulation and Design for

Assembly I

Fourth Floor, David L. Lawrence Convention Center, Room 402

8:55am–10:40am

Session Chair: Kristina Wärmefjord,

Chalmers University of

Technology, Gothenburg, Sweden

Session Co-Chair: Hua Wang,

Shanghai Jiao Tong University,

Shanghai, China

8:55am – Geometry Assurance in a Digitally Connected

Environment

Technical Presentation. IMECE2018-89239

Rikard Söderberg,

Chalmers University of Technology,

Gothenburg, Sweden

9:37am – Part Variation Simulations: An Industrial Case

Study With an Experimental Validation

Technical Paper Publication. IMECE2018-87329

Narendra Akhadkar,

Schneider Electric Industries SAS,

Grenoble, France,

Silvestre Cano,

Schneider Electric,

Apodaca, Mexico,

Alain Van Hoecke, Jean Marie Maldjian,

Christophe Gourru,

Schneider Electric Industries SAS,

Grenoble, France

9:58am – Convex Optimization Techniques as Applied to

Simulation of Compliant Assembly

Technical Presentation. IMECE2018-88963

Maria Stefanova, Boris Grigoriev, Margarita Petukhova,

Sergey Lupuleac, Stanislav Baklanov, Olga Minewitsch,

Peter the Great St. Petersburg Polytechnic University, Saint

Petersburg, Russia

10:19am – Tolerance Allocation With Simulation-Based

Digital Twin for CFRP-Metal Countersunk Bolt Joint

Technical Paper Publication. IMECE2018-86645

Hua Wa

ng, Mengqian Zhou,

Shanghai Jiao Tong University,

Shanghai, China,

Bo Liu,

Chongqing Changan Automobile Co.,

Ltd., Oushang Automobile Institute, Chongqing, China

TRACK  ADVANCED MANUFACTURING

–

THURSDAY, NOVEMBER 

2-2 CONGRESS-WIDE SYMPOSIUM ON

ADDITIVE MANUFACTURING

2-2-5 Congress-Wide Symposium on Additive

Manufacturing: Polymers I

Third Floor, David L. Lawrence Convention Center, Room 301

10:50am–12:35pm

Session Chair: Mehran Tehrani,

University of New Mexico,

Albuquerque, NM, United States

Session Co-Chairs: Junghoon Yeom,

Michigan State

University, East Lansing, MI, United States,

Heather Lai,

SUNY

New Paltz, New Paltz, NY, United States

10:50am – Direct and Converse Piezoelectric Behavior of

Three-Dimensionally Printed Polymer Without Filler or

Poling

Technical Presentation. IMECE2018-86014

Patatri Chakraborty, Chi Zhou, Deborah D.L. Chung,

University at Buffalo, State University of New York, Buffalo, NY,

United States

11:11am – In-Plane Molecular Alignment in 3D-Printed

Polymers Due to Printing-Process-Induced Shear Stress

Technical Presentation. IMECE2018-86015

Patatri Chakraborty, Naga B. Gundrati, Chi Zhou, Chong

Cheng, Deborah D.L. Chung,

University at Buffalo, State

University of New York, Buffalo, NY, United States

11:32am – Inﬂuence of the Weak Interfaces on the Fracture

Toughness of 3D Printed Polymers

Technical Presentation. IMECE2018-86508

L. Roy Xu, Mehran Tehrani,

University of New Mexico,

Albuquerque, NM, United States

11:53am – Effect of Process Parameters on Compressive

Properties of ULTEM 9085 Produced by FDM Process

Technical Paper Publication. IMECE2018-87523

Aboma Wagari Gebisa, Hirpa G. Lemu,

University of

Stavanger, Stavanger, Rogaland, Norway

12:14pm – Fully Resolved Simulations of Additive

Manufacturing Processes

Technical Presentation. IMECE2018-87850

Gretar Tryggvason, Huanxiong Xia, Jiacai Lu,

Johns Hopkins

University, Baltimore, MD, United States

2-4 NANOMANUFACTURING

2-4-2 Nanomanufacturing: Nanomaterials Synthesis

and Assembly

Third Floor, David L. Lawrence Convention Center, Room 304

10:50am–12:35pm

Session Chair: Dimitry Papkov,

University of Nebraska–

Lincoln, Lincoln, NE, United States

Session Co-Chair: Matt Maschmann,

University of Missouri,

Columbia, MO, United States

10:50am – Numerical Investigation of Internal Forces

During Carbon Nanotube Forest Self-Assembly

Technical Paper Publication. IMECE2018-86567

Taher Hajilounezhad, Matt Maschmann,

University of

Missouri-Columbia, Columbia, MO, United States

11:11am – Stochastic Growth of Tall Carbon Nanotube

Forest Using Rapid Thermal Chemical Vapor Deposition

Technical Presentation. IMECE2018-87644

Jaegeun Lee, Moataz Abdulhafez, Mostafa Bedewy,

University of Pittsburgh, Pittsburgh, PA, United States

11:32am – 3D Carbon Nanotube Microstructures From

Multi-Stage Chemical Vapor Deposition

Technical Presentation. IMECE2018-87840

Ryan Hines, Matt Maschmann,

University of Missouri-

Columbia, Columbia, MO, United States,

Cole Love-Baker,

University of South Carolina, Columbia, SC, United States

11:53am – Focused Laser Dewetting of Gold Nanoﬁlms and

Laser Induced Localized Physical Vapor Deposition

Technical Presentation. IMECE2018-88208

Jonathan Singer, Tiaxing Ma,

Rutgers University, Piscataway,

NJ, United States

12:14pm – 3D Compatible Sacriﬁcial Nanoimprint

Lithography for Tuning the Wettability of Thermoplastic

Materials

Technical Presentation. IMECE2018-89823

Molla Hasan, Jonathan Singer, Imrhankhan Shahjahan,

Rutgers University, Piscataway, NJ, United States

TRACK  ADVANCED MANUFACTURING

–

THURSDAY, NOVEMBER 

2-6 ADVANCED MACHINING AND

FINISHING

2-6-4 Nontraditional Machnining Processes

Third Floor, David L. Lawrence Convention Center, Room 305

10:50am–12:35pm

Session Chair: Guha Manogharan,

Pennsylvania State

University, University Park, PA, United States

Session Co-Chair: Yang Guo,

Michigan State University, East

Lansing, MI, United States

10:50am – A Comparison of the Effects of Wire Electrical

Discharge Machining Parameters on the Processing of

Traditionally Manufactured and Additively Manufactured

316L Stainless Steel Specimens

Technical Paper Publication. IMECE2018-88014

Gregory Bicknell,

Pennsylvania State University, State

College, PA, United States,

Guha Prasanna Manogharan,

Pennsylvania State University, Boardman, OH, United States

11:11am – Experimental Study on Machining of Hybrid

Composite Stacks Using Submerged Abrasive Waterjet

Machining Process

Technical Paper Publication. IMECE2018-88179

Sagil James, Mayur Sunil Narkhede,

California State

University Fullerton, Fullerton, CA, United States

11:32am – Methodology for the Control of the Volume of

Material Removal in the Plateau Honing Process

Technical Presentation. IMECE2018-88745

ilton Fabian Coba-Salcedo,

Universidad del Atlantico,

Barranquilla, Colombia,

Irene Buj-Corral, Joan Vivancos-

Calvet,

Universitat Politècnica de Catalunya, Barcelona, Spain

11:53am – Estimation of Machine Vision Parameters of

Surface Roughness and Wire Wear in Wire EDM of

Al-8%Si3N4 Metal Matrix Composite Material Using

Artiﬁcial Neural Network

Technical Presentation. IMECE2018-89478

Gurupavan H.R., Ravindra Holalu Venkatadas, Devegowda

T.M.,

P.E.S College of Engineering, Mandya, India

12:14pm – Geometric Tolerances Evaluation in Hydrostatic

Rotary Table

Technical Presentation. IMECE2018-88986

Jun Zha, Hangcheng Zhang, Yipeng Li, Yaolong Chen,

Xi’an Jiaotong University, Xi’an, China

2-8 ADVANCED MATERIAL FORMING

2-8-2 Formability-I

Third Floor, David L. Lawrence Convention Center, Room 302

10:50am–12:35pm

Session Chair: Chetan Nikhare,

Pennsylvania State University,

Erie, PA, United States

Session Co-Chair: William Emblom,

University of Louisiana-

Lafayette, Lafayette, LA, United States

10:50am – Technology Development and Tool Concepts for

High-Temperature Forming of Titanium

Technical Paper Publication. IMECE2018-86660

Frank Schieck,

Fraunhofer Institute for Machine Tools &

Forming Tech IWU, Chemnitz, Germany,

Dirk Landgrebe,

Matthias Demmler, Andre Albert,

Fraunhofer IWU, Chemnitz,

Germany,

Martin Weber,

Fraunhofer IST, Braunschweig,

Germany

11:11am – The Effect of Local Force Control on Punch

Forces During Panel Forming

Technical Paper Publication. IMECE2018-86030

William Emblom,

University of Louisiana-Lafayette, Lafayette,

LA, United States

11:32am – Tube Buckling: An Advantage to Tube Shaping

Technical Paper Publication. IMECE2018-86910

Chetan Nikhare,

Pennsylvania State University, Erie, PA,

United States

11:53am – Determination of Thermal Parameters of a Work-

Roll in Warm Rolling Using Inverse Modeling

Technical Paper Publication. IMECE2018-86106

Vinod Yadav,

North Eastern Regional Institute of Science &

Technology, Nirjuli, Arunachal Pradesh, India

12:14pm – Effect of Pre-Bending on Formability of DQ Steel

and Al 5182

Technical Paper Publication. IMECE2018-87321

Shabbir Memon, Hamid Lankarani, Obaidur Rahman

Mohammed,

Wichita State University, Wichita, KS, United

States

TRACK  ADVANCED MANUFACTURING

–

THURSDAY, NOVEMBER 

2-11 COMPUTATIONAL MODELING AND

SIMULATION FOR ADVANCED

MANUFACTURING

2-11-2 Advanced Manufacturing Processes-Modeling

and Simulation II

Third Floor, David L. Lawrence Convention Center, Room 303

10:50am–12:35pm

Session Chair: Muhammad Jahan,

Miami University, Oxford,

OH, United States

Session Co-Chair: Yucheng Liu,

Mississippi State University,

Mississippi State, MS, United States

10:50am – Finite Element Simulation of Backward Micro

Extrusion for Annealed Copper

Technical Paper Publication. IMECE2018-86755

Md. Mosleh Uddin, Debabrata Mondal, Paul D. Herrington,

University of New Orleans, New Orleans, LA, United States

11:11am – Effect of Size Distribution on Optical Absorption

During Intense Pulsed Light Sintering of Metal

Nanoparticles

Technical Paper Publication. IMECE2018-87038

Harish Devaraj, Hyun-Jun Hwang, Rajiv Malhotra,

Rutgers,

The State University of New Jersey, Piscataway, NJ, United

States

11:32am – Numerical Modeling of a Pure Water Jet

Machining of Ti-6Al-4V and Al 6061-T6 Using ABAQUS and

Smoothed Particle Hydrodynamics

Technical Paper Publication. IMECE2018-87271

Gre

g Pasken, Jianfeng Ma, Mark McQuilling,

Saint Louis

University, Saint Louis, MO, United States,

Muhammad

Jahan,

Miami University, Oxford, OH, United States

11:53am – FEM Investigation of Phase Transformation in

Vibration Assisted Nano Impact Machining by Loose

Abrasives (VANILA)

Technical Paper Publication. IMECE2018-87274

Nick Duong, Jianfeng Ma,

Saint Louis University, Saint Louis,

MO, United States,

Muhammad Jahan,

Miami University,

Oxford, OH, United States,

Shuting Lei,

Kansas State

University, Manhattan, KS, United States,

Murali Sundaram,

University of Cincinnati, Cincinnati, OH, United States

12:14pm – Cohesive Zone Modeling for Transfer Printing of

Thin Films

Technical Presentation. IMECE2018-89426

Shruti Jain, Roger Bonnecaze, Kenneth Liechti,

University of

Texas at Austin, Austin, TX, United States

2-12 VARIATION SIMULATION AND

DESIGN FOR ASSEMBLY

2-12-2 Variation Simulation and Design for

Assembly II

Fourth Floor, David L. Lawrence Convention Center, Room 402

10:50am–12:35pm

Session Chair: Hua Wang,

Shanghai Jiao Tong University,

Shanghai, China

Session Co-Chair: Kristina Wärmefjord,

Chalmers University

of Technology, Gothenburg, Sweden

10:50am – Efﬁcient Variation Simulation of Spot-Welded

Assemblies

Technical Paper Publication. IMECE2018-87454

Samuel Lorin,

Fraunhofer Chalmers Centre, Gothenburg,

Sweden,

Björn Lindau, Roham Sadeghi Tabar, Lars

Lindkvist, Kristina Wärmefjord, Rikard Söderberg,

Chalmers

University of Technology, Gothenburg, Sweden

11:11am – Simulation and Optimization of Airframe

Assembly Process

Technical Paper Publication. IMECE2018-87058

Sergey Lupuleac, Nadezhda Zaitseva, Maria Stefanova,

ergey Berezin, Julia Shinder, Margarita Petukhova,

Peter

the Great St. Petersburg Polytechnic University, St. Petersburg,

Russia,

Elodie Bonhomme,

Airbus SAS, Toulose, France

11:32am – Inﬂuence of Selective Laser Heat Treatment

Pattern Position on Geometrical Variation

Technical Paper Publication. IMECE2018-86164

Vaishak Ramesh Sagar, Kristina Wärmefjord, Rikard

Söderberg,

Chalmers University of Technology, Gothenburg,

Vastra Gotland, Sweden

11:53am – CAD-Based Tolerance Analysis in Preliminary

Design Stages Enabling Early Tolerance Evaluation

Technical Paper Publication. IMECE2018-86396

Stefan Goetz, Benjamin Schleich, Sandro Wartzack,

Friedrich-Alexander-University Erlangen-Nürnberg, Erlangen,

Germany

12:14pm – Compliant Variation Analysis for High-Speed

Train With Consideration of Welding Distortion

Technical Paper Publication. IMECE2018-86619

Tao Liu,

Shanghai Jiao Tong University, Shanghai, China,

Yongjun Li, Baowang Li,

CRRC Tangshan Co., Ltd.,

Tangshan, China,

Zhimin Li, Limin Yao, Sun Jin,

Shanghai

Jiao Tong University, Shanghai, China

TRACK  ADVANCED MANUFACTURING

–

THURSDAY, NOVEMBER 

2-2 CONGRESS-WIDE SYMPOSIUM ON

ADDITIVE MANUFACTURING

2-2-6 Congress-Wide Symposium on Additive

Manufacturing: Polymers II

Third Floor, David L. Lawrence Convention Center, Room 301

2:05pm–3:50pm

Session Chair: Mehran Tehrani,

University of New Mexico,

Albuquerque, NM, United States

Session Co-Chair: Deborah D.L. Chung,

University at Buffalo,

State University of New York, Buffalo, NY, United States

2:05pm – Optimization of Design Process of Fused

Filament Fabrication (FFF) 3D Printing

Technical Paper Publication. IMECE2018-87916

Jaeyoon Kim, Bruce Kang,

West Virginia University,

Morgantown, WV, United States

2:26pm – Mechanical Behavior of Octahedral and Octet

Structures Produced From CLIP Technology

Technical Paper Publication. IMECE2018-88192

Anil Saigal,

Tufts University, Medford, MA, United States,

Gian Calise,

Tufts University, Cranston, RI, United States

2:47pm – Flexible Strain Sensor Using Additive

Manufacturing and Conductive Liquid Metal: Design,

Fabrication, and Characterization

Technical Paper Publication. IMECE2018-88753

Austin Smith, Hamzeh Bardaweel,

Louisiana Tech University,

Ruston, LA, United States

3:08pm – Novel Ink for Ambient Condition Printing of Liquid

Crystal Elastomers for 4D Printing

Technical Presentation. IMECE2018-88768

Devin Roach, Devin J. Roach, H. Jerry Qi, Craig Hamel,

Georgia Institute of Technology, Atlanta, GA, United States

3:29pm – Rapid Multi-Material 3D Printing With Projection

Micro-Stereolithography Using an Enclosed Printing

Chamber and a Pump

Technical Presentation. IMECE2018-89396

Daehoon Han, Howon Lee,

Rutgers, The State University of

New Jersey, Piscataway, NJ, United States

2-4 NANOMANUFACTURING

2-4-3 Nanomanufacturing: Integration of Nanoscale

Materials or Textures for Enhanced Performance

Third Floor, David L. Lawrence Convention Center, Room 304

2:05pm–3:50pm

Session Chair: Chih-Hao Chang,

North Carolina State

University, Raleigh, NC, United States

Session Co-Chair: Dimitry Papkov,

University of Nebraska–

Lincoln, Lincoln, NE, United States

2:05pm – Advanced Nanomanufacturing and Hard-Soft

Materials Integration for Smart and Connected

Bioelectronics

Technical Presentation. IMECE2018-86294

Woon-Hong Yeo, Yun-Soung Kim,

Georgia Institute of

Technology, Atlanta, GA, United States

2:26pm – Regenerated Silk Fibroin Films With Reduced-

Sheet Content by Microwave Processing and Carbon

Nanotube Incorporation

Technical Presentation. IMECE2018-87653

Se Youn Cho, Moataz Abdulhafez, Mostafa Bedewy,

University of Pittsburgh, Pittsburgh, PA, United States

2:47pm – Systematic Analysis of Pattern Precision and

Uniformity in Roll-to-Roll Colloidal Assembly System

Technical Presentation. IMECE2018-86895

I-Te Chen, Elizabeth Schappell, Xiaolong Zhang, Chih-Hao

Chang,

North Carolina State University, Raleigh, NC, United

States

3:08pm – Modiﬁcation of Structure and Mechanical

Behavior of Continuous Nanoﬁbers Through Addition of

Small Amounts of Nanoinclusions

Technical Presentation. IMECE2018-89822

Dimitry Papkov, Mohammad N. Andalib, Yuris Dzenis,

University of Nebraska - Lincoln, Lincoln, NE, United States

2-6 ADVANCED MACHINING AND

FINISHING

2-6-5 Machinability of Engineering Materials

Third Floor, David L. Lawrence Convention Center, Room 305

2:05pm–3:50pm

Session Chair: Sathish Kannan,

American University of

Sharjah, Sharjah, United Arab Emir.

Session Co-Chair: Derek Yip-Hoi,

Western Washington

University, Bellingham, WA, United States

2:05pm – Effect of Rake Angle and Feed Rate on the

Surface Quality While Turning In Situ TiB2/7050 Al Metal

Matrix Composites

Technical Paper Publication. IMECE2018-87399

Kunyang Lin, Wenhu Wang, Ruisong Jiang, Yifeng Xiong,

Northwestern Ploytechnical University, Xi’an, Shaanxi, China

TRACK  ADVANCED MANUFACTURING

–

THURSDAY, NOVEMBER 

2:26pm – An Experimental Investigation of Inclined Hole

Drilling for CFRP Under Various Lubrication Techniques

Technical Paper Publication. IMECE2018-87550

Sathish Kannan,

American University of Sharjah, Sharjah,

United Arab Emir.,

Salman Pervaiz, Abhishek Ghoshal,

Rochester Institute of Technology - Dubai Campus, Dubai,

Dubai, United Arab Emir.

2:47pm – Investigation and Modeling of Flag Generation in

Honeycomb Sandwich Panel Machining

Technical Paper Publication. IMECE2018-87706

Derek Yip-Hoi, David Gill,

Western Washington University,

Bellingham, WA, United States

3:08pm – Delamination Area Prediction During Milling

Carbon Fiber Reinforced Polymer Composites Based on

Fiber Cutting Process Geometry Simulation Software

Technical Presentation. IMECE2018-87851

Xingyu Fu, Kyeongeun Song,

Purdue University, West

Lafayette, IN, United States,

Gyuho Kim, Byung-Kwon Min,

Yonsei University, Seoul, Korea (Republic),

Martin Jun,

Purdue University, West Lafayette, IN, United States

3:29pm – Comparative Assessment of Delamination

Control Techniques in Machining of CFRP

Technical Presentation. IMECE2018-88901

Kamlesh Phapale,

Bharat Forge Ltd., Pune, Maharashtra,

India

2-7 THIRD SYMPOSIUM ON FASTENING

AND JOINING TECHNOLOGY

2-7-2 Welding Performance Evaluation and

Simulation

Fourth Floor, David L. Lawrence Convention Center, Room 401

2:05pm–3:50pm

Session Chair: Thomas Whitney,

University of Dayton, Dayton,

OH, United States

Session Co-Chair: Sayed Nassar,

Oakland University,

Rochester, MI, United States

2:05pm – Numerical Investigation on the Effect of Pintool

Rotational Speed on the Coulomb and the Modiﬁed

Coulomb Friction Model of Friction-Stir-Welding (FSW)

Technical Presentation. IMECE2018-86673

Saad Aziz,

Louisiana State University, Baton Rouge, LA,

United States,

Washim Dewan,

DUET, Gazipur, Dhaka,

Bangladesh,

Daniel Huggett,

Louisiana State University,

Ponchatoula, LA, United States,

Muhammad Wahab, Ayman

Okeil, Warren Liao,

Louisiana State University, Baton Rouge,

LA, United States

2:26pm – Improvement of Joint Integrity in MIG Welded

Steel: A Review

Technical Paper Publication. IMECE2018-86788

Timothy Odiaka, Nkosinathi Madushele, Stephen Akinlabi,

University of Johannesburg, Johannesburg, Gauteng, South

Africa

2:47pm – Estimation and Comparison of Welding

Performances Using MRA and GMDH in P-GMAW for SS

316L Material

Technical Paper Publication. IMECE2018-88604

Rudreshi Addamani, Ravindra Holalu Venkatadas,

P E S

College of Engineering, Mandya, Karnataka, India,

Ugrasen

Gonchikar,

BMSC College of Engineering, Bangalore,

Karnataka, India,

Chethan Y.D.,

M I T Mysuru, Karnataka,

Mandya, India

3:08pm – Mathematical Model to Predict Tensile Strength

of Underwater Friction Stir Welded (UFSW) on 5052

Aluminium Alloys

Technical Paper Publication. IMECE2018-88610

Srinivasa Rao Pedapati,

Universiti Teknologi Petronas, Perak

Darul Ridzuan, Perak, Malaysia,

Dhanis Paramaguru,

Mokhtar Awang, Hamed Mohebbi,

Universiti Teknologi

Petronas, Seri Iskandar, Perak, Malaysia

3:29pm – Improving the Heat Dissipation From a Pressure

Wheel of a Laser Robotic End-of-Arm Tooling Using

Different Geometrical Designs and Materials

Technical Paper Publication. IMECE2018-86880

Abdallah Hamieh,

Lawrence Technological University,

Southeld, MI, United States,

Badih Jawad,

Lawrence

Technological University, Dearborn Heights, MI, United States,

Liping Liu, Vernon Fernandez,

Lawrence Technological

University, Southeld, MI, United States,

Mike Kheirallah,

Advanced Safety and Energy, Flint, MI, United States

2-8 ADVANCED MATERIAL FORMING

2-8-3 Formability – II

Third Floor, David L. Lawrence Convention Center, Room 302

2:05pm–3:50pm

Session Chair: Chetan Nikhare,

Pennsylvania State University,

Erie, PA, United States

Session Co-Chair: Scott Wagner,

Michigan Tech, Atlantic

Mine, MI, United States

2:05pm – A New Incremental Bending System to Form

Curved Metal Plate by Experiment and Finite Element

Simulation

Technical Paper Publication. IMECE2018-86800

Xiaobing Dang,

Chinese University of Hong Kong, Hong Kong,

Hong Kong,

Kai He,

Shenzhen Institutes of Advanced

Technology, Chinese Academy of Sciences, China, Shenzhen,

China,

Feifei Zhang,

Shenzhen Institutes of Advanced

Technology, Shenzhen, P.R.China, China,

Qiyang Zuo,

Shenzhen Institutes of Advanced Technology, Chinese

Academy of Sciences, China, Shenzhen, China,

Ruxu Du,

Chinese University of Hong Kong, Hong Kong, Hong Kong

2:26pm – Utilization of Wavy Toolpath in Single-Point

Incremental Forming

Technical Paper Publication. IMECE2018-86885

Tyler Grimm, Ihab Ragai, John Roth,

Pennsylvania State

University, Behrend College, Erie, PA, United States

TRACK  ADVANCED MANUFACTURING

–

THURSDAY, NOVEMBER 

2:47pm – Development of Processing Map for Superplastic

Deformation of Ti-6Al-4V Alloy

Technical Paper Publication. IMECE2018-88631

Abdul Wahed Mohd, Amit Kumar Gupta, Nitin Kotkunde,

BITS Pilani Hyderabad Campus, Hyderabad, Telangana, India,

Swadesh Kumar Singh,

GRIET, Hyderabad, India

3:08pm – Effect of Preform During Low Pressure Tube

Hydroforming

Technical Paper Publication. IMECE2018-86090

Ashley Trott, Chetan Nikhare,

Pennsylvania State University,

Erie, PA, United States

2-9 INNOVATIVE PRODUCT DESIGN

2-9-1 Innovative Product Design I

Fourth Floor, David L. Lawrence Convention Center, Room 402

2:05pm–3:50pm

Session Chair: Ricardo Jardim-Goncalves,

Universidade Nova

de Lisboa, Caparica, Portugal

Session Co-Chair: Siddharthsinh Jadeja,

Aditya Silver Oak

Institute of Technology, Rajkot Gujarat, India

2:05pm – The Design and Study of the Tensioned Whole

Coupling

Technical Paper Publication. IMECE2018-86458

Yaohui Li, A’ni Luo, Heping Liu,

Harbin Engineering

University, Harbin, China

2:26pm – Improve Enterprise Resources Management

Through the Usage of IoT in the Shopﬂoor

Technical Paper Publication. IMECE2018-87589

Adriana Cunha,

TecMinho/University of Minho, Guimarães,

Portugal,

Joao Silva,

Universidade do Minho, Guimaraes,

Portugal

2:47pm – Design of Damped Structures to Increase

Machine Tool Dynamical Performance

Technical Paper Publication. IMECE2018-87912

Francesco Aggogeri, Nicola Pellegrini,

University of Brescia,

Brescia, Lombardia, Italy,

Angelo Merlo,

CeSI, Cologno

Monzese (MI), Italy,

Alberto Borboni, Riccardo Adamini,

Claudio Taesi,

University of Brescia, Brescia, Lombardia, Italy

3:08pm – A Future Trend in Sensing Enterprise Systems

Technical Paper Publication. IMECE2018-88530

Majid Zamiri, Andreia Artiﬁce, Elsa Marcelino-Jesus,

Joao Sarraipa, Ricardo Jardim-Goncalves,

Universidade

Nova De Lisboa, Caparica, Portugal

3:29pm – Improve Product Proﬁtability While Accelerating

Time to Market

Technical Presentation. IMECE2018-88732

Stephanie Feraday,

aPriori, Concord, MA, United States

2-11 COMPUTATIONAL MODELING AND

SIMULATION FOR ADVANCED

MANUFACTURING

2-11-3 Advanced Manufacturing Processes-Modeling

and Simulation III

Third Floor, David L. Lawrence Convention Center, Room 303

2:05pm–3:50pm

Session Chair: Jose Teixeira,

University of Minho, Guimaraes,

Portugal

Session Co-Chair: Yucheng Liu,

Mississippi State University,

Mississippi State, MS, United States

2:05pm – A Study on Evolution of Splat Radius and

Temperature in Thermal Spray Process

Technical Paper Publication. IMECE2018-87303

Manpreet Dash, Sangharsh Kumar, Partha P. Bandyopadhyay,

Anandaroop Bhattacharya,

Indian Institute of Technology

Kharagpur, Kharagpur, West Bengal, India

2:26pm – A Numerical Study of Solder Paste Rolling

Process for PCB Printing

Technical Paper Publication. IMECE2018-88035

Ricardo Oliveira, Nelson Rodrigues, Jose Teixeira,

University of Minho, Guimaraes, Portugal,

Duarte Santos,

Bosch Car Multimedia SA, Braga, Portugal,

Delﬁm Soares,

University of Minho, Guimaraes, Portugal,

Maria Cerqueira,

Physics Department, Braga, Portugal,

Senhorinha Teixeira,

University of Minho, Guimaraes, Portugal

2:47pm – Numerical and Experimental Characterization of

Kerf Formation in Abrasive Waterjet Machining

Technical Paper Publication. IMECE2018-88617

Joseck Nyaporo Nyaboro,

Egypt-Japan University of Science

and Technology, New Borg Al Arab, Egypt,

Mahmoud Ahmed,

Assiut University, Assiut, Egypt,

Hassan El-Hofy,

Egypt-Japan

University of Science and Technology, New Borg Al Arab,

Egypt,

Mohamed El-Hofy,

Advanced Manufacturing Research

Centre with Boeing, University of Shefeld, Willis Way,

Rotherm, United Kingdom

3:08pm – Multiphysics Modeling and Parametric Analysis of

an Inductor for Heating Thin Sheet Materials

Technical Paper Publication. IMECE2018-88676

Alex Mazursky,

Miami University, Oxford, OH, United States,

Hee-Chang Park, Sung-Hyuk Song,

Korea Institute of

Machinery and Materials, Daejeon, Korea (Republic),

Jeong-

Hoi Koo,

Miami University, Oxford, OH, United States

3:29pm – Backpropagation Artiﬁcial Neural Network

Method for the Prediction of Nanostructured Waspaloy

Under Cryogenic and Hot Deformation

Technical Presentation. IMECE2018-88918

Harrison Onovo, David Esezobor, Muideen Bodude,

Adeyanju Sosimi,

University of Lagos, Lagos, Nigeria

TRACK  ADVANCED MANUFACTURING

–

THURSDAY, NOVEMBER 

2-2 CONGRESS-WIDE SYMPOSIUM ON

ADDITIVE MANUFACTURING

2-2-7 Congress-Wide Symposium on Additive

Manufacturing: Composites/Ceramics &

Bio-Applications

Third Floor, David L. Lawrence Convention Center, Room 301

4:00pm–5:45pm

Session Chair: Mehran Tehrani,

University of New Mexico,

Albuquerque, NM, United States

Session Co-Chairs: Gretar Tryggvason,

Johns Hopkins

University, Baltimore, MD, United States,

Scott Thompson,

Auburn University, Auburn, AL, United States

4:00pm – Dynamic Behavior of Biologically Inspired 3D

Printed Visco-Elastic Heterogeneous Structures

Technical Paper Publication. IMECE2018-87845

Heather Lai, Jennifer Beahan,

SUNY New Paltz, New Paltz,

NY, United States

4:21pm – Additively Manufactured, Design Optimized

Composites for Lightweighting

Technical Presentation. IMECE2018-88037

Nekoda Van De Werken, Pouria Khanbolouki,

University of

New Mexico, Albuquerque, NM, United States,

Chitrang Patel,

Ali Tamijani,

Embry-Riddle Aeronautical University, Daytona

Beach, FL, United States,

Mehran Tehrani,

University of New

Mexico, Albuquerque, NM, United States

4:42pm – Direct Ink Writing of Graphene Oxide Reinforced

PDMS Matrix Composites for Improved Mechanical

Properties

Technical Paper Publication. IMECE2018-88052

Chao Liu, Junjun Ding,

Alfred University, Alfred, NY, United

States,

Li Jiang,

Tuskegee University, Tuskegee, AL, United

States

5:03pm – Conformal 3D Printing of Tire Tread Using Ground

Tire Rubber (GTR) Composites

Technical Presentation. IMECE2018-89615

Faez Alkadi, Jae-Won Choi,

University of Akron, Akron, OH,

United States

5:24pm – Optimizing Process Parameters to Binder Jet

Ceramics

Technical Presentation. IMECE2018-89844

Edgar Mendoza, Daming Ding, B. Reeja-Jayan, Jack Beuth,

Carnegie Mellon University, Pittsburgh, PA, United States

2-6 ADVANCED MACHINING AND

FINISHING

2-6-6 Cutting Tool Performance and Treatment

Third Floor, David L. Lawrence Convention Center, Room 305

4:00pm–5:24pm

Session Chair: Muhammad Jahan,

Miami University, Oxford,

OH, United States

Session Co-Chair: Ihab Ragai,

Pennsylvania State University,

Behrend College, Erie, PA, United States

4:00pm – Studies on Cryogenic Treated Drills Under Nano-

Fluid Based Reduced Quantity Lubrication Conditions for

Machining Ti6Al4V

Technical Paper Publication. IMECE2018-86941

D. Samuel Raj, Aarthi Kumaran, Jerome Arul Praveen.C,

Anna University, Chennai, Tamil Nadu, India

4:21pm – Acoustic Signal Analysis for Prediction of Flank

Wear During Conventional Milling

Technical Paper Publication. IMECE2018-86886

Travis Roney, Anthony Bauccio, Derek Shaffer, Paige

Lorson, Ihab Ragai, David Loker,

Pennsylvania State

University, Behrend College, Erie, PA, United States,

Chetan

Nikhare,

Pennsylvania State University, Erie, PA, United States

4:42pm – Investigating the Effect of Tool Coating on Cutting

Forces and Tool Wear During Micro-Milling of

Polycarbonate Glass

Technical Paper Publication. IMECE2018-87441

Craig Hanson,

Miami University, Oxford, OH, United States,

Xingbang Chen,

Saint Louis University, St. Louis, MO, United

States,

Muhammad Jahan,

Miami University, Oxford, OH,

United States,

Jianfeng Ma,

Saint Louis University, St. Louis,

MO, United States,

Gregory K. Arbuckle,

Western Kentucky

University, Bowling Green, KY, United States

5:03pm – Experimental and Theoretical Investigations on

Tool Wear and Surface Quality in Micro Milling of SiCp/Al

Composites Under Dry and MQL Conditions

Technical Paper Publication. IMECE2018-86071

Ben Deng, Hao Wei Wang, Fang Yu Peng, Rong Yan, Lin

Zhou,

Huazhong University of Science and Technology,

Wuhan, China

TRACK  ADVANCED MANUFACTURING

–

THURSDAY, NOVEMBER 

2-7 THIRD SYMPOSIUM ON FASTENING

AND JOINING TECHNOLOGY

2-7-1 Bonded Joint and Bolted Joint Technologies

Third Floor, David L. Lawrence Convention Center, Room 304

4:00pm–5:45pm

Session Chair: Sayed Nassar,

Oakland University, Rochester,

MI, United States

Session Co-Chair: Thomas Whitney,

University of Dayton,

Dayton, OH, United States

4:00pm – The Effect of Temperature, Thickness, and

Working Time on Adhesive Properties

Technical Paper Publication. IMECE2018-86737

Nick Aerne, John P. Parmigiani,

Oregon State University,

Corvallis, OR, United States

4:21pm – Finite Element Analysis of the Load Factor and

Design for Bolted T-Shape Flange Joints Consisting of

Dissimilar Clamped Parts

Technical Paper Publication. IMECE2018-87335

Shunichiro Sawa,

Hardlock Industry Co., Ltd., Tokyo, Japan,

Yasuhisa Sekiguchi,

Hiroshima University, Hiroshima, Japan,

Toshiyuki Sawa,

Hiroshima University, Koto-City, Japan

4:42pm – Use of Tailored Fiber Placement (TFP) to

Reinforce Fastener Holes in Composites

Technical Presentation. IMECE2018-87999

Thomas Whitney, Gyaneshwar Tandon,

University of Dayton,

Dayton, OH, United States

5:03pm – Frequency Effect of Torsion on Rotating Bending

Fatigue Behavior of Gas Tungsten Arc (GTA) Welded AISI

1018 and AISI 4140 Welded Joints

Technical Paper Publication. IMECE2018-88338

Saad Aziz, Ahmet Eren, Muhammad Wahab,

Louisiana State

University, Baton Rouge, LA, United States

2-8 ADVANCED MATERIAL FORMING

2-8-4 Testing and Defects

Third Floor, David L. Lawrence Convention Center, Room 302

4:00pm–5:45pm

Session Chair: Scott Wagner,

Michigan Tech, Atlantic Mine,

MI, United States

Session Co-Chair: Molla Hasan,

Rutgers, The State University

of New Jersey, Piscataway, NJ, United States

4:00pm – High-Throughput Fabrication and Testing of

Metallic Glass Nanostructures

Technical Presentation. IMECE2018-89835

Molla Hasan,

Rutgers, The State University of New Jersey,

Piscataway, NJ, United States,

Golden Kumar,

Texas Tech

University, Lubbock, TX, United States

4:21pm – Novel Approach for Tension Testing Micro Tubes

Technical Paper Publication. IMECE2018-87244

Scott Wagner,

Michigan Tech, Atlantic Mine, MI, United

States,

William Emblom,

University of Louisiana-Lafayette,

Lafayette, LA, United States,

Kevin M. Johnson, Kahaan P.

Shah, Navrose Handa, Nihal Kapare,

Michigan Technological

University, Houghton, MI, United States

4:42pm – Experimental Analysis and Testing of the

Hemming Process Types Utilized in the Automotive

Industry

Technical Paper Publication. IMECE2018-87232

Pablo Alberto Limon Leyva, Pedro De Jesus Garcia

Zugasti, Eder Hazael Govea Valladares,

Instituto Tecnológico

de San Luis Potosi, San Luis Potosi, Mexico,

Antonio de

Jesus Balvantin Garcia,

University of Guanajuato, Salamanca,

Guanajuato, Mexico,

Jose Angel Diosdado De La Pena,

Universidad De Guanajuato, Salamanca, Mexico,

Isidro de

Jesus Sanchez Arce,

Instituto Tecnológico de San Luis

Potosi, San Luis Potosi, Mexico

5:03pm – Springback Analysis in Hybrid Material

Deformation

Technical Paper Publication. IMECE2018-86455

Elizabeth Mamros,

Pennsylvania State University, Behrend

College, McMurray, PA, United States,

Chetan Nikhare,

Pennsylvania State University, Erie, PA, United States

5:24pm – Simulation and Experiment Research on Squeeze

Casting Combined With Forging of Automobile Control Arm

Technical Paper Publication. IMECE2018-86006

Liang Zhenglong, Zhang Qi,

Xi’an Jiaotong University, Xi’an,

China

2-9 INNOVATIVE PRODUCT DESIGN

2-9-2 Innovative Product Design II

Fourth Floor, David L. Lawrence Convention Center, Room 401

4:00pm–5:45pm

Session Chair: Joao Silva,

Universidade do Minho,

Guimaraes, Portugal

Session Co-Chair: Joao Sarraipa,

UNINOVA - DEE/FCT/UNL,

Caparica, Portugal

4:00pm – A Mathematical Functional Decomposition

Approach Through Granularity Partition Process in

Quotient Space

Technical Paper Publication. IMECE2018-86217

Yu-Tong Li, China

University of Petroleum, Qingdao, China,

Yuxin Wang,

China University of Petroleum, Huadong,

Qingdao, Shandong, China

4:21pm – Visualization and Detection of Road Trafﬁc Events

Using Complex Event Processing

Technical Paper Publication. IMECE2018-87909

Paulo Figueiras, Hugo Antunes, Guilherme Guerreiro,

Ruben Costa, Ricardo Jardim-Goncalves,

Universidade

Nova De Lisboa, Caparica, Portugal

TRACK  ADVANCED MANUFACTURING

–

THURSDAY, NOVEMBER 

4:42pm – Monitoring, Risk Assessment and Actuation for

Alzheimer Patients: A Case Study

Technical Paper Publication. IMECE2018-88166

Fernando Luis-Ferreira, Joao Giao, Pedro Corista, Jorge

Calado, Joao Sarraipa,

UNINOVA, Caparica, Portugal

5:03pm – 3D Printing of Highly Thermal Insulated

Thermosets

Technical Presentation. IMECE2018-89539

Biran Wang, Kristen Arias, Zimeng Zhang, Zhijian Pei,

Shiren Wang,

Texas A&M University, College Station, TX,

United States

5:24pm – Effects of Environmental Conditions on

Geometrical and Mechanical Properties of Polycarbonate

Samples Made by the Fused Filament Fabrication Process

Technical Presentation. IMECE2018-89328

Yishu Yan, Lichen Fang, Ojaswi Agarwal, Kevin Hemker,

Sung Kang,

Johns Hopkins University, Baltimore, MD, United

States

2-11 COMPUTATIONAL MODELING AND

SIMULATION FOR ADVANCED

MANUFACTURI

2-11-4 Advanced Manufacturing Processes-Modeling

and Simulation V

Third Floor, David L. Lawrence Convention Center, Room 303

4:00pm–5:45pm

Session Chair: Tien-Chien Jen,

University of Johannesburg,

Johannesburg, South Africa

Session Co-Chair: Yucheng Liu,

Mississippi State University,

Mississippi State, MS, United States

4:00pm – Randoms Subspace Identiﬁcation in Modal

Analysis of Port Crane

Technical Presentation. IMECE2018-86993

Xiuzhong Xu,

Shanghai Maritime University, Shanghai,

Shanghai, China,

Weidong Zhu,

University of Maryland,

Baltimore County, Baltimore, MD, United States,

Xu Zhang,

Shanghai Maritime University, Shanghai, China

4:21pm – Feasibility Study of Condition Monitoring for

Some Event Around the Crosshead in a Reciprocating

Compressor

Technical Paper Publication. IMECE2018-87153

Yoshifumi Mori,

Tokuyama Corporation, Yamaguchi, Japan,

Takashi Saito, Yu Mizobe,

Yamaguchi University, Ube City/

Yamaguchi, Japan

4:42pm – The Mechanistic Process Comparison Between a

Novel Slotted Injection Manifold Versus the Multiple

Injection Manifold of a Low Pressure Square Type Atomic

Layer Deposition Reactor

Technical Paper Publication. IMECE2018-86401

Rigardt A.M. Coetzee, Tien-Chien Jen,

University of

Johannesburg, Johannesburg, South Africa

5:03pm – Generation Mechanism of Interfacial Residual

Stress and its Effect on Mechanical Properties of Hybrid

Fiber-Reinforced Thermoplastic Polymer (HFRTP)

Technical Paper Publication. IMECE2018-86523

Wan Cao, Ning Kang, Lingyu Sun, Shanshu Xiang, Xudong

Yang, Yiben Zhang,

Beihang University, Beijing, China

5:24pm – Analysis of Tool Position Error Induced Surface

Topography Changes in Five-Axis Flank Milling

Technical Paper Publication. IMECE2018-86898

Hao Si, Liping Wang,

Tsinghua University, Beijing, Beijing,

China

TRACK  ADVANCED MANUFACTURING

–

THURSDAY, NOVEMBER 

NOTES

3-1-1: General Aerospace

3-2-1: Advances in Aerodynamics

3-3-1: Novel Aerodynamics and Aerospace Propulsion Systems

3-4-1: Advances in Aerospace Structures and Materials – 1

3-4-2: Advances in Aerospace Structures and Materials – 2

3-5-1: Beam, Plate, and Shell Structures

3-6-1; Lightweight Sandwich Composites and Layered Structures – 1 (in Honor of

Prof. Frostig)

3-6-2: Lightweight Sandwich Composites and Layered Structures – 2 (in Honor of

Prof. Frostig)

3-7-1: Dynamic Behavior of Composites

3-8-1: Dynamics and Contr

ol of Aerospace Structures

3-9-1: Materials and Structures at High Temperature and Extreme Conditions

3-10-1: Impact, Damage and Fracture of Composite Structures

3-12-1: Peridynamics Modeling – 1

3-12-2: Peridynamics Modeling – 2

3-12-3: Peridynamics Modeling – 3

3-13-1: Multibody Dynamics Simulation in Aerospace Structures

3-17-1: Nonlinear Problems in Aerospace Structures

3-18-1: Congress-Wide Symposium on NDE&SHM – Structural Health Monitoring of

Aerospace Vehicles

3-19-1: Congress-Wide Symposium on NDE&SHM – Nondestructive Evaluation and

Structural Health Monitoring of Com

posite Materials and Structures

3-20-1: Advances in Aerospace Technology Plenary I

3-20-2: Advances in Aerospace Technology Plenary II

Track Organizer

Weihua Su,

University of Alabama,

United States

Yingtao Liu,

University of Oklahoma,

United States

Topic Organizers

Jose C. Pascoa,

Universidade Da Beira

Interior, Portugal

Michele Trancossi,

Shefeld Hallam

University – ACES, United Kingdom

Jakson Augusto Leger Monteiro,

University of Cape Verde, Cape Verde

Carlos Xisto,

Chalmers University of

Technology, Sweden

Abdollah Afjeh,

University of Toledo,

United States

Dianyun Zhang,

University of

Connecticut, United States

Yingtao Liu,

University of Oklahoma,

United States

Xin Ning,

Pennsylvania State University,

United States

Zahra Sotoudeh,

Cal Poly Pomona,

United States

Xin-Lin Gao,

Southern Methodist

University, United States

Victor Birman,

Missouri University of

Science and Technology, United

States

Oded Rabinovitch,

Technion – Israel

Institute of Technology, Israel

Zhangxian Yuan,

Georgia Inst of

Technology, United States

Weiyi Lu,

Michigan State University,

United States

Baoxing Xu,

University of Virginia, United

States

Meng Wang,

University of California, San

Diego, United States

Uttam Chakravarty,

University of New

Orleans, United States

Nikolaos Xiros,

University of New

Orleans, Naval Arch & Marine Eng.,

United States

Evan Pineda,

NASA Glenn Research

Center, United States

Natasha Vermaak,

Lehigh University,

United States

Pavana Prabhakar,

University of

Wisconsin-Madison, United States

Kwek Tze Tan,

The University of Akron,

United States

Ali Naja,

ANSYS Inc., United States

Erdogan Madenci,

University of Arizona,

United States

Erkan Oterkus,

University of Strathclyde,

United Kingdom

Jinwei Shen,

University of Alabama,

United States

Erasmo Carrera,

Politecnico Di Torino,

Italy

Matteo Filippi,

Politecnico Di Torino, Italy

Alfonso Pagani,

Politecnico Di Torino,

Italy

Yiska Goldfeld,

Technion – Israel Institute

of Technology, Israel

Andrei Zagrai,

New Mexico Institute of

Mining & Technology, United States

Francesco Lanza Di Scalea,

University of

California San Diego, United States

Yanfeng Shen,

Shanghai Jiao Tong

University, China

Session Organizers

Caglar Oskay,

Vanderbilt University,

United States

George Kardomateas,

Georgia Institute

of Technology, United States

Charles Wojnar,

Missouri S&T, United

States

TRACK 3 ADVANCES IN AEROSPACE

TECHNOLOGY

WEDNESDAY, NOVEMBER 14

3-20 PLENARY

3-20-1 Advances in AerospaceTechnology Plenary I

Third Floor, David L. Lawrence Convention Center, Room 304

9:00am–9:45am

9:00am – Rapid, Physics-Based Reduced Order Modeling

of Nonlinear Aerodynamics

Plenary Presentation. IMECE2018-90092

Marilyn Smith,

Georgia Institute of Technology, Atlanta, GA,

United States

3-1 GENERAL AEROSPACE

3-1-1 General Aerospace

Third Floor, David L. Lawrence Convention Center, Room 308

10:00am–11:45am

Session Chair: Yingtao Liu,

University of Oklahoma, Norman,

OK, United States

Session Co-Chair: Caglar Oskay,

Vanderbilt University,

Nashville, TN, United States

10:00am – Photo-Acoustic Based Non-Contact and Non-

Destructive Evaluation for Detection of Damage Precursors

in Composites

Technical Paper Publication. IMECE2018-86148

Siqi Wang, Liangzhong Xiang, Yingtao Liu, Hong Liu,

University of Oklahoma, Norman, OK, United States

10:21am – Fabrication, Optimization, and Characterization

of PDMS/CNF Nanocomposite Sensor Arrays

Technical Paper Publication. IMECE2018-86269

Wenyuan Luo, Yingtao Liu, Mrinal Saha,

University of

Oklahoma, Norman, OK, United States,

Steven Patterson,

Thomas Robison,

NNSA’s National Security Campus operated

by Honeywell, Kansas City, MO, United States

10:42am – Design and Optimization of a Multipurpose

Urban Fireﬁghting and Disaster Relief UAV

Technical Paper Publication. IMECE2018-86321

Mohammed Mayeed,

Kennesaw State University, Marietta,

GA, United States

11:03am – About the Immediate Shift From Large-Sized

Machine Boeing 747 to Boeing 777

Technical Paper Publication. IMECE2018-86770

Masako Shishido,

IWATE University, Morioka, Japan

11:24am – EHSA Primary Flight Controls Seals Wear

Degradation Model

Technical Paper Publication. IMECE2018-87080

Antonio C. Bertolino, Rocco Gentile, Giovanni Jacazio,

Francesco Marino, Massimo Sorli,

Politecnico di Torino,

Torino, Italy

3-18 CONGRESS-WIDE SYMPOSIUM ON

NDE & SHM: STRUCTURAL HEALTH

MONITORING OF AEROSPACE VEHICLES

3-18-1 Congress-Wide Symposium on NDE & SHM:

Structural Health Monitoring of Aerospace Vehicles

Third Floor, David L. Lawrence Convention Center, Room 307

10:00am–11:45am

Session Chair: Yiska Goldfeld,

Technion - Israel Institute of

Technology, Haifa, Israel

Session Co-Chair: Andrei Zagrai,

New Mexico Institute of

Mining & Technology, Socorro, NM, United States

10:00am – INTEGRATING THREE

INSPECTION/MONITORING METHODS FOR AEROSPACE

APPLICATIONS

Technical Presentation. IMECE2018-87548

Amir Nasrollahi, Piervincenzo Rizzo,

University of Pittsburgh,

Pittsburgh, PA, United States

10:21am – Hybrid Carbon Based Textile Reinforcement for

Monitoring Water Inﬁltration

Technical Presentation. IMECE2018-89241

Yiska Goldfeld, Gali Perry,

Technion - Israel Institute of

Technology, Haifa, Israel,

Gözdem Dittel, Till Quadﬂieg,

Thomas Gries,

RWTH Aachen University, Aachen, Germany

10:42am – Disbond Detection in a Honeycomb Composite

Plate Using an Ultrasonic Method

Technical Presentation. IMECE2018-89310

Ajit Mal, Fei Gao, Lifu Wang, Steffen Tai, Leonardo Araque,

University of California, Los Angeles, Los Angeles, CA, United

States,

Jing Lin,

Beihang University, Beijing, Beijing, China

11:03am – Development of in Orbit Guided Wave

Experiments

Technical Presentation. IMECE2018-89508

John Sanchez, Andrei Zagrai,

New Mexico Institute of Mining

& Technology, Socorro, NM, United States

11:24am – A Piezoelectric-Based Wireless Sensor for

Monitoring Strain Through Inductive Coupling

Technical Presentation. IMECE2018-89947

Paul Ferri, Xiyue Zou,

Rutgers, The State University of New

Jersey, Piscataway, NJ, United States,

Patrick V. Hull,

NASA

Marshall Space Flight Center, Huntsville, AL, United States,

Aaron Mazzeo, Rutgers,

The State University of New Jersey,

Piscataway, NJ, United States

TRACK  ADVANCES IN AEROSPACE TECHNOLOGY

–

WEDNESDAY, NOVEMBER 

3-4 ADVANCES IN AEROSPACE

STRUCTURES AND MATERIALS

3-4-1 Advances in Aerospace Structures and

Materials – 1

Third Floor, David L. Lawrence Convention Center, Room 308

1:45pm–3:30pm

Session Chair: Dianyun Zhang,

University of Connecticut,

Storrs, CT, United States

Session Co-Chair: Xin Ning,

Pennsylvania State University,

Urbana, IL, United States

1:45pm – The Effects of Layer-by-Layer Thickness and

Fiber Volume Fraction Variation on the Mechanical

Performance of a Pressure Vessel

Technical Paper Publication. IMECE2018-86468

Emre Özaslan, Volkan Coskun, Ali Yetgin, Bülent Acar,

Tarik Olgar,

Roketsan Inc., Ankara, Turkey

2:06pm – Recent Advancements in Spikes Used in

Hypersonic Re-Entry Vehicles by Using CFD

Technical Paper Publication. IMECE2018-86550

E.L.N. Rohit Madhukar,

Koneru Lakshmaiah Educational

Foundation, Durg, Chhattisgarh, India,

Harish Panjagala,

Koneru Lakshmaiah Educational Foundation, Guntur, Andhra

Pradesh, India

2:27pm – Effect of Different Cutting Depths to the Cutting

Forces and Machining Quality of CFRP Parts in Orthogonal

Cutting: A Numerical and Experimental Comparison

Technical Paper Publication. IMECE2018-87008

Farid Miah,

Institut Clement Ader, Toulouse, France,

Emmanuel De-Luycker,

Université de Toulouse, INP-ENIT,

Tarbes, France,

Frederic Lachaud, Yann Landon, Robert

Piquet,

Institut Clément Ader, Université de Toulouse, CNRS,

INSA, ISAE-SUPAERO, Mines Albi, UPS, Toulouse, France

2:48pm – Development of Structural Neural Network

Design Tool for Buckling Behaviour of Skin-Stringer

Structures Under Combined Compression and Shear

Technical Paper Publication. IMECE2018-87970

Aydin Okul,

Turkish Aerospace Industry, Ankara, Turkey,

Ercan Gurses,

Middle East Technical University, Ankara,

Turkey

3:09pm – Determination of Johnson Cook Material Model

Constants and Their Inﬂuence on Machining Simulations of

Tungsten Heavy Alloy

Technical Paper Publication. IMECE2018-88270

Kiran Sagar Chithajalu, Amrita Priyadarshini, Amit Kumar

Gupta, Sidharth Kumar Shukla,

BITS Pilani Hyderabad

Campus, Hyderabad, Telengana, India

3-12 PERIDYNAMICS MODELING

3-12-1 Peridynamics Modeling – 1

Third Floor, David L. Lawrence Convention Center, Room 306

1:45pm–3:30pm

Session Chair: Erdogan Madenci,

University of Arizona,

Tucson, AZ, United States

Session Co-Chair: Erkan Oterkus,

University of Strathclyde,

Glasgow, United Kingdom

1:45pm – Peridynamic Modeling Using a Commercial Finite

Element Software

Technical Presentation. IMECE2018-86022

Zhenghao Yang, Mingyang Li, Erkan Oterkus, Selda

Oterkus,

University of Strathclyde, Glasgow, United Kingdom

2:06pm – Peridynamics/Digital Imaging Correlation for

Tracking Crack Propagation Paths

Technical Presentation. IMECE2018-89721

Erdogan Madenci,

University of Arizona, Tucson, AZ, United

States,

Amin Yaghoobi, Atila Barut,

Global Engineering

Research and Technologies, Tucson, AZ, United States,

Nam Phan,

Naval Air Systems Command (NAVAIR), Patuxent

River, MD, United States

2:27pm – Peridynamic Modelling of Fatigue Crack Growth

In Welded Joints

Technical Presentation. IMECE2018-89663

Kyutack Hong, Selda Oterkus,

University of Strathclyde,

Glasgow, United Kingdom

2:48pm – One Inclusion in the Inﬁnite Peristatic Matrix

Technical Paper Publication. IMECE2018-86519

Valeriy Buryachenko,

Micromechanics & Composites LLC,

Dayton, OH, United States

3:09pm – Fully Coupled Thermomechanical Peridynamic

Analysis of Composite Structures

Technical Presentation. IMECE2018-89547

Yan Gao, Selda Oterkus,

University of Strathclyde, Glasgow,

United Kingdom

TRACK  ADVANCES IN AEROSPACE TECHNOLOGY

–

WEDNESDAY, NOVEMBER 

3-19 CONGRESS-WIDE SYMPOSIUM ON

NDE & SHM: NONDESTRUCTIVE

EVALUATION AND STRUCTURAL HEALTH

MONITORING OF COMPOSITE MATERIALS

AND STRUCTURES

3-19-1 Congress-Wide Symposium on NDE & SHM:

Nondestructive Evaluation and Structural Health

Monitoring of Composite Materials and Structures

Third Floor, David L. Lawrence Convention Center, Room 307

1:45pm–3:30pm

Session Chair: Francesco Lanza Di Scalea,

University of

California San Diego, La Jolla, CA, United States

Session Co-Chairs: Yanfeng Shen,

Shanghai Jiao Tong

University, Shanghai, China,

Andrei Zagrai,

New Mexico

Institute of Mining & Technology, Socorro, NM, United States

1:45pm – Application of Interface Guided Waves for

Inspection of Hybrid Bonded Joints: Semi Analytical Final

Element Approach

Technical Presentation. IMECE2018-86075

Mark Jahanbin,

Villanova University / Boeing Company,

Mukilteo, WA, United States,

Sridhar Santhanam,

Villanova

University, Collegeville, PA, United States

2:06pm – Guided Wave Generation and Propagation in

Self-Sensing Piezoelectric Composite Plates for Structural

Health Monitoring

Technical Paper Publication. IMECE2018-86229

Junzhen Wang, Yanfeng Shen,

Shanghai Jiao Tong University,

Shanghai, China

2:27pm – Advanced Structural Testing With Optical

Metrology

Technical Presentation. IMECE2018-87519

Jack Irwin,

Trilion Quality Systems, King of Prussia, PA, United

States

2:48pm – Guided Wave Techniques for Damage Detection

in Composite Aerospace Structures

Technical Presentation. IMECE2018-89370

Francesco Lanza Di Scalea, Margherita Capriotti, Ranting

Cui,

University of California San Diego, La Jolla, CA, United

States,

Antonino Spada,

University of Palermo, Palermo, Italy

3-2 ADVANCES IN AERODYNAMICS

3-2-1 Advances in Aerodynamics

Third Floor, David L. Lawrence Convention Center, Room 307

3:45pm–5:30pm

Session Chair: Jose C. Pascoa,

Universidade Da Beira Interior,

Covilha, Portugal

Session Co-Chairs: Michele Trancossi,

Shefeld Hallam

University - ACES, Shefeld, Shefeld, United Kingdom,

Jakson Augusto Leger Monteiro,

University of Cape Verde,

Praia, Cape Verde

3:45pm – Solution to Optimize the Airfoils Shapes Placed

Into a Supersonic Viscous Flow

Technical Paper Publication. IMECE2018-86781

Victorita Radulescu,

University Politechnica of Bucharest,

Bucharest, Romania

4:06pm – Investigations on Unsteady Flow Excitation and

Mechanical Performance of Last Turbine Stage Long Blade

Using Fluid-Structure Interaction Method

Technical Paper Publication. IMECE2018-86950

Jun Li, Zhigang Li, Liming Song,

Xian Jiaotong University,

Xian, Shaanxi, China,

Qinghua Deng,

Xi’An Jiaotong

University, Xi’An, China

4:27pm – Effects of Harmonic Vibration on Cycloidal Rotor

Performance

Technical Paper Publication. IMECE2018-87103

Jakson Augusto Leger Monteiro,

University of Cape Verde,

Praia, Cape Verde,

Jose C. Pascoa,

Universidade Da Beira

Interior, Covilha, Portugal

4:48pm – CFD-Based Aerodynamic Analysis of the Flow

Past an Airfoil With Passive Trapezoidal and Perforated

Vortex Generators

Technical Paper Publication. IMECE2018-87440

Charbel Bou-Mosleh, Rawad Himo, Charbel Habchi,

Notre Dame University - Louaize, Zouk Mosbeh, Lebanon

5:09pm – Experimental Analysis of Alternative Dielectric

Materials for DBD Plasma Actuators

Technical Paper Publication. IMECE2018-87455

Frederico Rodrigues, Jose C. Pascoa,

Universidade da

Beira Interior, Covilha, Portugal,

Michele Trancossi,

Shefeld

Hallam University, Shefeld, United Kingdom

TRACK  ADVANCES IN AEROSPACE TECHNOLOGY

–

WEDNESDAY, NOVEMBER 

3-7 DYNAMIC BEHAVIOR OF COMPOSITES

3-7-1 Dynamic Behavior of Composites

Third Floor, David L. Lawrence Convention Center, Room 306

3:45pm–5:30pm

Session Chair: Weiyi Lu,

Michigan State University,

East Lansing, MI, United States

Session Co-Chairs: Baoxing Xu,

University of Virginia,

Charlottesville, VA, United States,

Meng Wang,

University

of California, San Diego, La Jolla, CA, United States

3:45pm – Energy Capture Mechanism of Liquid Nanofoam

for Blast Wave Mitigation

Technical Presentation. IMECE2018-89404

Weiyi Lu,

Michigan State University, East Lansing, MI, United

States

4:06pm – Liquid Nanofoam System Under Compression:

Competition Between Liquid Inﬁltration and Nanopore

Deformation

Technical Presentation. IMECE2018-89110

Yue Zhang,

University of Virginia, Charlottesville, VA, United

States,

Mingzhe Li,

Michigan State University, East Lansing,

MI, United States,

Baoxing Xu,

University of Virginia,

Charlottesville, VA, United States,

Weiyi Lu,

Michigan State

University, East Lansing, MI, United States

4:27pm – Enhanced Interaction Between Filler and Tube

Wall in Liquid Nanofoam-Filled Thin-Walled Tubes

Technical Presentation. IMECE2018-89287

Mingzhe Li, Junfeng Li,

Michigan State University, East

Lansing, MI, United States,

Saeed Barbat,

Ford Motor

Company, Dearborn, MI, United States,

Mohamed Ridha

Baccouche,

Ford, Ann Arbor, MI, United States,

Weiyi Lu,

Michigan State University, East Lansing, MI, United States

4:48pm – Behavior of Lithium-Ion Battery Pouch Cells

Under Dynamic Penetration

Technical Presentation. IMECE2018-88858

Meng Wang,

University of California, San Diego, La Jolla, CA,

United States

5:09pm – Static and Dynamic Mechanical Behavior of

Suspended Graphene/Silver NanoWire/Graphene

(Gr/AgNW/Gr) Composite

Technical Presentation. IMECE2018-89529

Chenglin Wu, Chuanrui Guo, Yanxiao Li,

Missouri University

of Science and Technology, Rolla, MO, United States,

David Veysset, Yuchen Sun, Steven E. Kooi, Keith A.

Nelsom,

Massachusetts Institute of Technology, Cambridge,

MA, United States,

Genda Chen,

Missouri University of

Science and Technology, Rolla, MO, United States

THURSDAY, NOVEMBER 15

3-20 PLENARY

3-20-2 Advances in Aerospace Technology Plenary II

Third Floor, David L. Lawrence Convention Center, Room 305

8:00am–8:45am

8:00am – On the Flightpath to Adaptive Aerospace

Structures: Articulated Tensegrity

Plenary Presentation. IMECE2018-90093

George Lesieutre,

Pennsylvania State University, University

Park, PA, United States

3-6 LIGHTWEIGHT SANDWICH

COMPOSITES AND LAYERED

STRUCTURES—IN HONOR OF PROF.

FROSTIG

3-6-1 Lightweight Sandwich Composites and

Layered Structures – 1 (in Honor of Prof. Frostig)

Third Floor, David L. Lawrence Convention Center, Room 306

8:55am–10:40am

Session Chair: Victor Birman,

Missouri University of Science

and Technology, St. Louis, MO, United States

Session Co-Chair: George Kardomateas,

Georgia Institute of

Technology, Alpharetta, GA, United States

8:55am – Structural Modelling of Reinforced Cement

Composite Under Uniaxial Loading

Technical Presentation. IMECE2018-88960

Yiska Goldfeld,

Technion - Israel Institute of Technology, Haifa,

Israel

9:10am – Advanced Zig-Zag Beam Theories for Sandwich

Structures Analyses

Technical Paper Publication. IMECE2018-86783

Matteo Filippi, Erasmo Carrera,

Politecnico Di Torino, Torino,

Italy

9:25am – Higher-Order Shell Element for the Static and

Free-Vibration Analysis of Sandwich Structures

Technical Paper Publication. IMECE2018-86784

Erasmo Carrera, Stefano Valvano, Matteo Filippi,

Politecnico

di Torino, Torino, Italy

9:40am – Nonlocal Beam and Plate Models From Three-

Dimensional Stress Gradient Elasticity

Technical Presentation. IMECE2018-87739

Isaac Elishakoff,

Florida Atlantic University, Boca Raton, FL,

United States,

Florian Hache,

Florida Atlantic University,

Moussy Le Neuf, France,

Noel Challamel,

University Britagne

Sud, Lorient, France

TRACK  ADVANCES IN AEROSPACE TECHNOLOGY

–

WEDNESDAY, NOVEMBER 

9:55am – Optimization of the Composite Airplane Fuselage

for an Optimum Structural Integrity

Technical Paper Publication. IMECE2018-88215

Athreya Nagesh,

Penn State Harrisburg, Middletown, PA,

United States,

Ola Rashwan,

Penn State University,

Middletown, PA, United States,

Ma’moun Abu-Ayyad,

Penn

State Harrisburg, Middletwon, PA, United States

10:10am – Control of Fracture at the Interface of Dissimilar

Materials Using Randomly Oriented Inclusions and Fiber

Networks

Technical Presentation. IMECE2018-88664

Victor Birman,

Missouri University of Science and Technology,

St. Louis, MO, United States

3-8 DYNAMICS AND CONTROL OF

AEROSPACE STRUCTURES

3-8-1 Dynamics and Control of Aerospace

Structures

Third Floor, David L. Lawrence Convention Center, Room 307

8:55am–10:40am

Session Chair: Uttam Chakravarty,

University of New Orleans,

Kenner, LA, United States

Session Co-Chair: Nikolaos Xiros,

University of New Orleans,

New Orleans, LA, United States

8:55am – Active Vibration Control of a Helicopter Rotor

Blade by Using a Linear Quadratic Regulator

Technical Paper Publication. IMECE2018-86319

Md. Mosleh Uddin, Pratik Sarker,

University of New Orleans,

New Orleans, LA, United States,

Colin R. Theodore,

NASA

Ames Research Center, Mountain View, CA, United States,

Uttam Chakravarty,

University of New Orleans, Kenner, LA,

United States

9:10am – A Comparative Study Between Selective Laser

Melting and Electron Beam Additive Manufacturing Based

on Thermal Modeling

Technical Paper Publication. IMECE2018-86428

M. Shaﬁqur Rahman, Paul Schilling, Paul D. Herrington,

University of New Orleans, New Orleans, LA, United States,

Uttam Chakravarty,

University of New Orleans, Kenner, LA,

United States

9:25am – An Analysis of Harmonic Airloads Acting on

Helicopter Rotor Blades

Technical Paper Publication. IMECE2018-86625

Iftekhar Alam Riyad,

University of New Orleans, New Orleans,

LA, United States,

Uttam Chakravarty,

University of New

Orleans, Kenner, LA, United States

9:40am – A Hybrid Energy Harvesting System Based on

Solar Radiation and Mechanical Vibration

Technical Paper Publication. IMECE2018-86928

M. Shaﬁqur Rahman,

University of New Orleans, New

Orleans, LA, United States,

Uttam Chakravarty,

University of

New Orleans, Kenner, LA, United States

9:55am – System Identiﬁcation of Hydrokinetic Energy

Harvester Using Flow Induced Oscillations

Technical Paper Publication. IMECE2018-87059

Ralph Saxton, Soumyadip Patra, Nikolaos Xiros,

University

of New Orleans, New Orleans, LA, United States,

Michael

Bernitsas, Hai Sun,

University of Michigan, Ann Arbor, MI,

United States

10:10am – Characterizations of Diagnostic Properties and

Detection Techniques of Fentanyl and Related Synthetic

Opioids

Technical Paper Publication. IMECE2018-87803

M. Shaﬁqur Rahman,

University of New Orleans, New

Orleans, LA, United States,

Uttam Chakravarty,

University of

New Orleans, Kenner, LA, United States

3-9 HIGH TEMPERATURE MATERIALS AND

STRUCTURES

3-9-1 Materials and Structures at High Temperature

and Extreme Conditions

Fourth Floor, David L. Lawrence Convention Center, Room 403

8:55am–10:40am

Session Chair: Evan Pineda,

NASA Glenn Research Center,

Cleveland, OH, United States

Session Co-Chairs: Natasha Vermaak,

Lehigh University,

Bethlehem, PA, United States,

Pavana Prabhakar,

University of

Wisconsin-Madison, Madison, WI, United States

8:55am – Method of Fundamental Solution in

Thermoelasticity of Random Structure Matrix Composites

Technical Paper Publication. IMECE2018-86515

Valeriy Buryachenko,

Micromechanics & Composites LLC,

Dayton, OH, United States

9:16am – Optimization of Spatially Tailored Metal-Ceramic

Composite Airframe in a High-Speed Environment

Technical Presentation. IMECE2018-87960

Phillip Deierling,

University of Iowa, Iowa City, IA, United

States,

Emily Dryer,

Ohio State University, Columbus, OH,

United States,

Olesya Zhupanska,

University of Arizona,

Tucson, AZ, United States

9:37am – Microstructure Based Constitutive Model for

Two-Phase Superalloys

Technical Presentation. IMECE2018-88358

asoud Ghorbani Moghaddam,

Medical College of

Wisconsin, Milwaukee, WI, United States,

Ajit Achuthan,

Clarkson University, Potsdam, NY, United States,

Brett A.

Bednarcyk, Steven Arnold, Evan Pineda,

NASA Glenn

Research Center, Cleveland, OH, United States

9:58am – Effects of Microstructure on the Viscoplastic

Response of Sea Ice

Technical Presentation. IMECE2018-89408

Shuvrangsu Das, Pedro Ponte Castañeda,

University of

Pennsylvania, Philadelphia, PA, United States

TRACK  ADVANCES IN AEROSPACE TECHNOLOGY

–

WEDNESDAY, NOVEMBER 

10:19am – A Novel Methodology for Accurate

Determination of Local Interphase Modulus Gradients in

Model Nanocomposites

Technical Presentation. IMECE2018-89667

Pavan Kolluru,

Duke University, Durham, NC, United States,

Min Zhang,

Northwestern University, Evanston, IL, United

States,

L. Catherine Brinson,

Duke University, Durham, NC,

United States

3-5 BEAM, PLATE, AND SHELL

STRUCTURES

3-5-1 Beam, Plate, and Shell Structures

Fourth Floor, David L. Lawrence Convention Center, Room 403

10:50am–12:35pm

Session Chair: Zahra Sotoudeh,

Cal Poly Pomona, Ontario,

CA, United States

Session Co-Chair: Xin-Lin Gao,

Southern Methodist

University, Dallas, TX, United States

10:50am – Finite Element Modelling of TBC Failure

Mechanisms by Using XFEM

Technical Paper Publication. IMECE2018-86576

Safa Mesut Bostanci,

Aselsan A.S., Ankara, Turkey,

Ercan

Gurses, Demirkan Coker,

Middle East Technical University,

Ankara, Turkey

11:11am – Mixed One-/Two-Dimensional Models With Node

Dependent Kinematic Capabilities for the Analysis of

Metallic and Composite Structures

Technical Paper Publication. IMECE2018-87490

Enrico Zappino, Erasmo Carrera,

Politecnico di Torino,

Torino, Italy

11:32am – New Non-Classical Kirchhoff Rod Model

Incorporating the Microstructure Effect

Technical Presentation. IMECE2018-89994

Gongye Zhang, Xin-Lin Gao,

Southern Methodist University,

Dallas, TX, United States

11:53am – Residual Strength Prediction of 3D Textile

Composites Under Combined Mechanical Loading and

Hostile Environmental Conditions

Technical Presentation. IMECE2018-89772

Qingda Yang, Yuhang Yang,

University of Miami, Coral

Gables, FL, United States

12:14pm – A Preliminary Design Method for Axial Turbine

Technical Paper Publication. IMECE2018-88251

Fan Yang,

Xi’an Jiaotong University, Xi’an, China,

Lei Li,

Shouyi Sun,

Northwestern Polytechnical University, Xi’an,

China

3-6 LIGHTWEIGHT SANDWICH

COMPOSITES AND LAYERED

STRUCTURES—IN HONOR OF PROF.

FROSTIG

3-6-2 Lightweight Sandwich Composites and

Layered Structures – 2 (in Honor of Prof. Frostig)

Third Floor, David L. Lawrence Convention Center, Room 306

10:50am–12:35pm

Session Chair: Zhangxian Yuan,

Georgia Institute of

Technology, Atlanta, GA, United States

Session Co-Chair: Oded Rabinovitch,

Technion - Israel

Institute of Technology, Haifa, Israel

10:50am – Flexural Elastic Wave Propagation in a Periodic

Composite Plate Structure Incorporating Microstructure,

Surface Energy and Foundation Effects

Technical Presentation. IMECE2018-87262

Gongye Zhang, Xin-Lin Gao,

Southern Methodist University,

Dallas, TX, United States

11:05am – Hygro-Thermal 2D Debonding in Sandwich-Like

Tiles

Technical Presentation. IMECE2018-88718

Shai Feldfogel, Oded Rabinovitch,

Technion - Israel Institute

of Technology, Haifa, Israel

11:20am – Dynamic Stability Behavior of Sandwich Panels

Under Impulsive Axial Loads

Technical Presentation. IMECE2018-88946

Zhangxian Y

uan,

Georgia Institute of Technology, Atlanta, GA,

United States,

George Kardomateas,

Georgia Institute of

Technology, Alpharetta, GA, United States

11:35am – A High Order Approach for Sandwich Beams

With Face/Core debonds

Technical Presentation. IMECE2018-88947

Zhangxian Yuan,

Georgia Institute of Technology, Atlanta, GA,

United States,

George Kardomateas,

Georgia Institute of

Technology, Alpharetta, GA, United States,

Leif Carlsson,

Florida Atlantic University, Boca Raton, FL, United States

11:50am – Exact Analytical Buckling Loads Calculation of

Thin Orthotropic Plates

Technical Presentation. IMECE2018-88959

Moshe Eisenberger,

Technion - Israel Institute of Technology,

Technion City, Israel,

Joseph Tenenbaum, Aharon Deutsch,

Technion - Israel Institute of Technology, Haifa, Israel

12:05pm – Inﬂuence of Core Deformation Constraints on

Energy Release Rate in Debonding of Honeycomb Core

Sandwich

Technical Presentation. IMECE2018-89804

Mohammad Ta

uhiduzzaman, Leif Carlsson,

Florida Atlantic

University, Boca Raton, FL, United States

TRACK  ADVANCES IN AEROSPACE TECHNOLOGY

–

WEDNESDAY, NOVEMBER 

3-12 PERIDYNAMICS MODELING

3-12-2 Peridynamics Modeling – 2

Third Floor, David L. Lawrence Convention Center, Room 307

10:50am–12:35pm

Session Chair: Erkan Oterkus,

University of Strathclyde,

Glasgow, United Kingdom

Session Co-Chair: Erdogan Madenci,

University of Arizona,

Tucson, AZ, United States

10:50am – Peridynamic Modeling of Composite Laminates

Technical Presentation. IMECE2018-89554

Erdogan Madenci, Mehmet Dorduncu,

University of Arizona,

Tucson, AZ, United States,

Nam Phan,

Naval Air Systems

Command (NAVAIR), Patuxent River, MD, United States

11:11am – Peridynamics Formulation for Beam Structures

Technical Presentation. IMECE2018-89550

Cong Tien Nguyen, Selda Oterkus,

University of Strathclyde,

Glasgow, United Kingdom

11:32am – Modeling Material Anisotropy with

Peridynamics: Part I

Technical Presentation. IMECE2018-89962

Pablo Seleson, Jeremy Trageser,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States,

Max Gunzburger,

Florida State University, Tallahassee, FL, United States

11:53am – Modeling Material Anisotropy with

Peridynamics: Part II

Technical Presentation. IMECE2018-89970

Pablo Seleson, Jeremy Trageser,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States,

Max Gunzburger,

Florida State University, Tallahassee, FL, United States

12:14pm – Generalized Mori-Tanaka Approach in

Micromechanics of Random Structure Peristatic

Composites

Technical Presentation. IMECE2018-89218

Valeriy Buryachenko,

Micromechanics & Composites LLC,

Dayton, OH, United States

3-3 NOVEL AEROSPACE PROPULSION

SYSTEMS

3-3-1 Novel Aerodynamics and Aerospace Propulsion

Systems

Fourth Floor, David L. Lawrence Convention Center, Room 403

2:05pm–3:50pm

Session Chair: Jose C. Pascoa,

Universidade Da Beira Interior,

Covilha 6200, Portugal

Session Co-Chairs: Carlos Xisto,

Chalmers University of

Technology, Göteborg, Sweden,

Abdollah Afjeh,

University of

Toledo, Toledo, OH, United States

2:05pm – Numerical Analysis of a Multi-Species MHD

Model for Plasma Layer Control of Re-Entry Vehicles

Technical Paper Publication. IMECE2018-87467

Filipe Dias,

Universidade da Beira Interior, Covilhã, Portugal,

Carlos Xisto,

Chalmers University of Technology, Göteborg,

Sweden,

Jose C. Pascoa,

Universidade da Beira Interior,

Covilha, Portugal

2:26pm – Flight Load Analysis and Prediction Based on

Scaled Sequential Threshold Least-Squares (S2TLS)

Algorithm

Technical Presentation. IMECE2018-88993

Shengwei Zhu, Yi Wang,

University of South Carolina,

Columbia, SC, United States

2:47pm – A Novel Approach for Satellite Attitude Control by

Using Solar Sailing

Technical Paper Publication. IMECE2018-88311

Ni Li, P. Arguelles, K. Chaput, S. Kenan, S. Kim, D. Li,

Y. Vazquez, D. Viveros, T. Nye,

California State University,

Los Angeles, Los Angeles, CA, United States,

K. Salinas,

Northrop Grumman, Carson, CA, United States

3:08pm – A Review of Propulsion Systems for Cubesats

Technical Paper Publication. IMECE2018-88174

Jose C. Pascoa, Odelma Teixeira, Gustavo Filipe,

Universidade da Beira Interior, Covilhã, Portugal

3-4 ADVANCES IN AEROSPACE

STRUCTURES AND MATERIALS

3-4-2 Advances in Aerospace Structures and

Materials – 2

Third Floor, David L. Lawrence Convention Center, Room 306

2:05pm–3:50pm

Session Chair: Yingtao Liu,

University of Oklahoma, Norman,

OK, United States

Session Co-Chair: Dianyun Zhang,

University of Connecticut,

Storrs, CT, United States

2:05pm – Method of Creating Composite Manufacture

Drawing

Technical Presentation. IMECE2018-88823

Chethan Rangaswamy,

Rolls-Royce, Pune, India

TRACK  ADVANCES IN AEROSPACE TECHNOLOGY

–

WEDNESDAY, NOVEMBER 

2:26pm – Static Failure Analysis of Textile Composite

Structures Using Mechanics of Structure Genome in

MSC.NASTRAN

Technical Presentation. IMECE2018-89175

Xin Liu,

Purdue University, West Lafayette, IN, United States,

Federico Gasco,

Spirit AeroSystems, Inc., Wichita, KS, United

States,

Wenbin Yu,

Purdue University, West Lafayette, IN,

United States

2:47pm – Low-Velocity Impact and Interlaminar Fracture

Toughness of Unidirectional and Quasi 3D Braided

Composite

Technical Presentation. IMECE2018-89719

Tony Wente, Wu Zhou, Xinyu Mao,

Michigan State University,

Lansing, MI, United States,

Danielle Zeng,

Ford, Dearborn, MI,

United States,

Xinran Xiao,

Michigan State University, Lansing,

MI, United States

3:08pm – Imperfection-Insensitive Axially Loaded

Cylindrical Shells

Technical Presentation. IMECE2018-89894

Xin N

ing,

Pennsylvania State University, Urbana, IL, United

States

3:29pm – Homogenization Estimates for Viscoelastic

Composites Based on an Incremental Variational Principle

Technical Presentation. IMECE2018-89598

Jose E. Cotelo Alonso, Pedro Ponte Castañeda,

University

of Pennsylvania, Philadelphia, PA, United States

3-10 IMPACT, DAMAGE AND FRACTURE OF

COMPOSITE STRUCTURES

3-10-1 Impact, Damage and Fracture of Composite

Structures

Third Floor, David L. Lawrence Convention Center, Room 307

2:05pm–3:50pm

Session Chair: Kwek Tze Tan,

University of Akron, Akron, OH,

United States

Session Co-Chair: Ali Naja,

ANSYS Inc., Houston, TX, United

States

2:05pm – Mode-II Crack Initiation of Carbon Fiber Epoxy

Under Marine Conditions

Technical Presentation. IMECE2018-89875

Rodrigo Chavez, Veronica Eliasson,

University of California

San Diego, La Jolla, CA, United States

2:20pm – Composite Fan Case Damage From Fan Blade

Out Replicated With Flat Panel Gas Gun Testing

Technical Presentation. IMECE2018-89178

Andy VanderKlok,

Williams International, Commerce Charter

Township, MI, United States,

Jim Dorer, Xinran Xiao,

Michigan State University, Lansing, MI, United States

2:35pm – Experimental Specimen for Classiﬁcation of

Matrix Compression Damage in Carbon Fiber Reinforced

Polymers

Technical Paper Publication. IMECE2018-87132

Taylor Rawlings, Kevin Carpenter, John P. Parmigiani,

Oregon State University, Corvallis, OR, United States

2:50pm – Effect of Low Temperature Arctic Conditions on

Impact and Post-Impact Mechanisms of Composite

Sandwich Structures

Technical Presentation. IMECE2018-88556

Kwek Tze Tan, Mahfujul Khan,

University of Akron, Akron,

OH, United States

3:05pm – Lightning Strike Protection and EMI Shielding of

Fiber Reinforced Composite Using Gold and Silver

Nanoﬁlms

Technical Paper Publication. IMECE2018-88639

Praveen Bollavaram, Muhammad Rahman, Ramazan

Asmatulu,

Wichita State University, Wichita, KS, United States

3:20pm – Elastic Metamaterial Design to Filter Harmonic

Mechanical Wave Propagation

Technical Paper Publication. IMECE2018-87753

Gustavo Rodrigues,

Universidade Estácio de Sá, Rio de

Janeiro, Brazil,

Hans Weber,

Pontical Catholic University of

Rio de Janeiro, Rio de Janeiro, RJ, Brazil,

Larissa Driemeier,

University of São Paulo, São Paulo, Brazil

3-12 PERIDYNAMICS MODELING

3-12-3 Peridynamics Modeling – 3

Third Floor, David L. Lawrence Convention Center, Room 307

4:00pm–5:45pm

Session Chair: Erdogan Madenci,

University of Arizona,

Tucson, AZ, United States

Session Co-Chair: Erkan Oterkus,

University of Strathclyde,

Glasgow, United Kingdom

4:00pm – Peridynamic Model to Predict Fracture Evolution

During Lithiation Process

Technical Presentation. IMECE2018-89372

Hanlin Wang, Erkan Oterkus, Selda Oterkus,

University of

Strathclyde, Glasgow, United Kingdom

4:21pm – Peridynamic Modeling of Concrete Pavement

Structures

Technical Presentation. IMECE2018-89515

Nicolas Sau, Jose Medina,

Universidad de Sonora,

Hermosillo, Sonora, Mexico

4:42pm – Peridynamic Modeling of a Viscoelastic Material

Technical Presentation. IMECE2018-89659

Yunke Huang, Selda Oterkus,

University of Strathclyde,

Glasgow, United Kingdom

5:03pm – Computational Homogenization in Peristatics of

Periodic Structure Composites

Technical Paper Publication. IMECE2018-86517

Valeriy Buryachenko,

Micr

TRACK  ADVANCES IN AEROSPACE TECHNOLOGY

–

WEDNESDAY, NOVEMBER 

3-13 MULTIBODY DYNAMICS SIMULATION

IN AEROSPACE STRUCTURES

3-13-1 Multibody Dynamics Simulation in Aerospace

Structures

Fourth Floor, David L. Lawrence Convention Center, Room 403

4:00pm–5:45pm

Session Chair: Jinwei Shen,

University of Alabama,

Tuscaloosa, AL, United States

Session Co-Chair: Charles Wojnar,

Missouri S&T, Rolla, MO,

United States

4:00pm – Real Time Loading Test Rig for Flight Control

Actuators Under PHM Experimentation

Technical Paper Publication. IMECE2018-86967

Piergiorgio Chiavaroli, Giuseppe Evangelista, Andrea de

Martin, Giovanni Jacazio, Massimo Sorli,

Politecnico di

Torino, Torino, TO, Italy

4:21pm – Experimental Flight Validation of NATASHA’s

Results for Aeroelastic Analysis of a HALE Aircraft

Technical Presentation. IMECE2018-87878

Ehsan Izadpanahi, Kishan Kalpoe,

Florida International

University, Miami, FL, United States,

Pezhman Mardanpour,

Florida International University, Weston, FL, United States

4:42pm – Fundamental Unstanding of Propeller Whirl

Flutter Through Multibody Dynamics Simulation

Technical Presentation. IMECE2018-88792

Christian Hoover, Jinwei Shen,

University of Alabama,

Tuscaloosa, AL, United States

5:03pm – Multibody Dynamics Study of Effects of Hub Type

on Tiltrotor Whirl Flutter and Rotor Loads

Technical Presentation. IMECE2018-88793

Kyle Nelson, Jinwei Shen, Christian Hoover,

University of

Alabama, Tuscaloosa, AL, United States

5:24pm – Multibody Dynamics Analysis of Helicopter

Rotor-Fuselage Systems

Technical Presentation. IMECE2018-88795

Jennifer Baggett,

University of Alabama, Gardendale, AL,

United States,

Jinwei Shen,

University of Alabama,

Tuscaloosa, AL, United States

3-17 NONLINEAR PROBLEMS IN

AEROSPACE STRUCTURES

3-17-1 Nonlinear Problems in Aerospace Structures

Third Floor, David L. Lawrence Convention Center, Room 306

4:00pm–5:45pm

Session Chair: Erasmo Carrera,

Politecnico Di Torino, Torino,

Italy

4:00pm – Comparative Study of Post-Buckling Load

Redistribution in Stiffened Aircraft Panel With and Without

Material Nonlinearity

Technical Paper Publication. IMECE2018-86346

Enes Aydin,

Turkish Aerospace Industries, Ankara, Ankara,

Turkey,

Altan Kayran,

METU Center for Wind Energy, Ankara,

Turkey

4:21pm – A Global-Local Strategy for the Elastoplastic

Analysis of Complex Metallic Structures via Component-

Wise Approach

Technical Paper Publication. IMECE2018-86564

Erasmo Carrera, Ibrahim Kaleel, Manish Nagaraj, Marco

Petrolo,

Politecnico di Torino, Torino, Italy

4:42pm – Evaluation of In-Plane and Out-of-Plane Stresses

in Composite Structures Subjected to Large

Displacements/Rotations

Technical Paper Publication. IMECE2018-86671

Alfonso Pagani, Riccardo Augello, Erasmo Carrera,

Politecnico di Torino, Torino, Italy

5:03pm – Virtual Vibration Correlation Technique (VCT) for

Nonlinear Analysis of Metallic and Composite Structures

Technical Paper Publication. IMECE2018-86674

Alfonso Pagani, Riccar

do Augello, Erasmo Carrera,

Politecnico di Torino, Torino, Italy

5:24pm – Nonlinear Dynamics of Rotating Structures and

Helicopter Blades

Technical Paper Publication. IMECE2018-86786

Matteo Filippi, Alfonso Pagani, Erasmo Carrera,

Politecnico

di Torino, Torino, Italy

TRACK  ADVANCES IN AEROSPACE TECHNOLOGY

–

WEDNESDAY, NOVEMBER 

NOTES

4-1-1: Biomedical and Biotechnology Plenary I

4-1-2: Biomedical and Biotechnology Plenary II

4-2-1: Damage Biomechanics I: Blunt Impact Effects and Analysis

4-2-2: Damage Biomechanics II: Ballistic Impact and Blast Effects and Analysis

4-2-3: Damage Biomechanics III: Materials Characterization, Modeling and

Analysis

4-2-4: Damage Biomechanics IV: Cavitation as a Mechanism for Brain Injury

4-3-1: Vibration Characteristics and Characterisations

4-3-2: Vibration applications to Therapy and Rehabilitation

4-4-1: Tissue Characterisations

4-4-2: Biomedical Imaging and Characterisation

4-5-1: Biomaterials and Tissue I: Fabrication

4-5-2: Biomaterials and Tissue II: Modelling

4-5-3: Biomaterials and Tissue III: Sythesis and Characteriazation

4-5-4: Biomaterials and Tissue IV: Syth

esis and Characteriazation

4-6-1: Mechanobiology

4-7-1: Detection and Monitoring Biomedical Devices

4-7-2: Surgical Assistive Devices

4-7-3: Fluid and Microuid Biomedical Devices

4-7-4: Fluid and Microuid Biomedical Devices

4-8-1: Dynamics and Control of Biomechanical Systems I

4-8-2: Dynamics and Control of Biomechanical Systems II

4-8-3: Dynamics and Control of Biomec

hanical Systems III

4-9-1: Clinical Applications of Bioengineering I – Experimental Methods

4-9-2: Clinical Applications of Bioengineering II

4-10-1: Biomedical Modeling I

4-10-2: Biomedical Modeling II

4-10-3: Biomedical Modeling III

4-10-4: Biomedical Modeling IV

4-10-5: Biomedical Modeling V

4-11-2: Musculoskeletal Biomechanics

4-11-3: Musculoskeletal and Sport Biomechanics

4-14-1: Biotransport

4-14-2: Heat Transfer and Fluid

Track Organizers

Ahmed Al-Jumaily,

Auckland University

of Technology, New Zealand

Sara Wilson,

University of Kansas,

United States

Lulu Wang,

Hefei University of

Technology, China

Topic Organizers

Anil Saigal,

Tufts University, United

States

Seyed Allameh,

Northern Kentucky Univ,

United States

Karen Chang Yan,

College of New

Jersey, United States

Xun Yu,

New York Institute of

Technology, United States

Maurizio Manzo,

University of North

Texas, United States

Shan Hu,

Iowa State University, United

States

Mostafa Fatemi,

Mayo Clinic, United

States

Assimina Pelegri,

Rutgers University,

United States

Xiaoning Jiang,

NC State University,

United States

Cahit A Evrensel,

Ankara University,

Turkey

X. Gary Tan,

U.S. Naval Research Lab,

United States

Douglas E. Dow,

Wentworth Institute of

Technology, United States

Li-Hsin Han,

Drexel University, United

States

Linxia Gu,

University of Nebraska-

Lincoln, United States

Shanzhong (Shawn) Duan,

Saint Martin's

University, United States

Yi Hua,

University of Pittsburgh, United

States

Reuben Kraft,

Pennsylvania State

University, United States

Karim Muci-Kuchler,

South Dakota

School of Mines and Technology,

United States

Amit Bagchi,

U.S. Naval Research

Laboratory, United States

Dumitru Caruntu,

University of Texas

Rio Grande Valley, United States

Bogdan Epureanu,

University of

Michigan, United States

Davide Piovesan,

Gannon University,

United States

Yuan Feng,

Shanghai Jiao Tong

University, China

Peyman Honarmandi,

Manhattan

College, United States

Parisa Saboori,

Manhattan College,

United States

Hai-Chao Han,

University of Texas at

San Antonio, United States

Zhangli Peng,

University of Notre Dame,

United States

Ahmed Al-Jumaily,

Auckland University

of Technology, New Zealand

Toshihiko Shiraishi, Y

okohama National

University, Japan

Takashi Saito,

Yamaguchi University,

Japan

Session Organizers

Anne Schmitz,

Gannon University, United

States

Ashfaq Adnan,

University of Texas

Arlington, United States

C.S. Florio,

US Army ARDEC, United

States

Chao Liang,

Praxair, Inc., United States

Dan Wang,

Old Dominion University,

United States

Junfei Tong,

University of Nebraska

Lincoln, United States

Kalyani Nair,

Bradley University, United

States

Liandong Yu,

Hefei University of

Technology, China

Lara Thompson,

University of the District

of Columbia, United States

Margaret Nowicki,

United States Military

Academy, United States

Miri Weiss Cohen,

Braude College of

Engineering, Israel

Ping Zhao,

Hefei University of

Technology, China

Rika Carlsen,

Robert Morris University,

United States

Sikhanda S. Satapathy,

ARL WMRD,

United States

Souransu Nandi,

University st Buffalo,

United States

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY

ENGINEERING

WEDNESDAY, NOVEMBER 14

4-1 BIOMEDICAL AND BIOTECHNOLOGY

PLENARY PRESENTATION

4-1-1 Biomedical and Biotechnology Plenary I

Third Floor, David L. Lawrence Convention Center, Room 303

9:00am–9:45am

9:00am – Acoustoﬂuidics: Merging Acoustics and

Microﬂuidics for Biomedical Applications

Plenary Presentation. IMECE2018-90094

Tony Jun Huang,

Duke University, Durham, NC, United States

4-2 DAMAGE BIOMECHANICS

4-2-4 Damage Biomechanics IV: Cavitation as a

Mechanism for Brain Injury

Third Floor, David L. Lawrence Convention Center, Room 309

10:00am–11:45am

Session Chair: Rika Carlsen,

Robert Morris University, Moon

Township, PA, United States

Session Co-Chair: X. Gary Tan,

U.S. Naval Research Lab,

Washington, DC, United States

10:00am – Cavitation Nucleation in Tissue Simulant Due to

Mechanical Impact

Technical Presentation. IMECE2018-88941

Wonmo Kang,

U.S. Naval Research Laboratory, Washington,

DC, United States,

Ashfaq Adnan,

University of Texas

Arlington, Arlington, TX, United States,

Amit Bagchi,

U.S.

Naval Research Laboratory, Washington, DC, United States

10:15am – Acceleration-Induced Pressure Gradient and

Cavitation in Soft Biomaterials During Mechanical Impact

Technical Presentation. IMECE2018-88942

Wonmo Kang, Marc Raphael,

U.S. Naval Research

Laboratory, Washington, DC, United States

10:30am – Computational Study of Cavitation Nucleation in

Gelatin Due to Impact and Shock

Technical Presentation. IMECE2018-89828

Fuad Hasan, Siddarth Chintamani, Bria

n Dennis,

University

of Texas at Arlington, Arlington, TX, United States,

Amit

Bagchi, Thomas O’Shaughnessy, Wonmo Kang,

U.S.

Naval Research Laboratory, Washington, DC, United States,

Ashfaq Adnan,

University of Texas Arlington, Arlington, TX,

United States

10:45am – Computational Study of Mild Traumatic Brain

Injury Due to Shock Induced Bubble Dynamics in

Viscoelastic Soft Tissues

Technical Presentation. IMECE2018-89820

Fuad Hasan, Yuan Ting Wu, Ashfaq Adnan,

University of

Texas at Arlington, Arlington, TX, United States

11:00am – Interfacial Shear Behavior of Collagen Triple

Helix Bundle

Technical Presentation. IMECE2018-89989

Khandakar Mahmud, Yuan Ting Wu, Ashfaq Adnan,

University of Texas Arlington, Arlington, TX, United States

4-8 DYNAMICS AND CONTROL OF

BIOMECHANICAL SYSTEMS

4-8-1 Dynamics and Control of Biomechanical

Systems I

Third Floor, David L. Lawrence Convention Center, Room 310

10:00am–11:45am

Session Chair: Dumitru Caruntu,

University of Texas

Rio Grande Valley, Edinburg, TX, United States

Session Co-Chairs: Bogdan Epureanu,

University of Michigan,

Ann Arbor, MI, United States,

Davide Piovesan,

Gannon

University, Erie, PA, United States

10:00am – Virtual Interaction Between Patients and

Occupational Therapists Using an Assistive Robotic Device

With Cyber-Physical System

Technical Paper Publication. IMECE2018-87289

Marvin Cheng,

Embry-Riddle Aeronautical University,

Morgantown, WV, United States,

Po-Lin Huang, Hao-Chuan

Chu, Li-Han Peng,

National Tsing Hua University, Hsinchu,

Taiwan,

Ezzat Bakhoum,

University of West Florida,

Pensacola, FL, United States

10:21am – Estimation of Hip and Ankle Visco-Elastic

Parameters During Quiet Standing

Technical Paper Publication. IMECE2018-87585

Angel Cerda-Lugo, Alejandro González,

UASLP, San Luis

Potosi, Mexico,

Antonio Cardenas,

UASLP, San Luis Potosã ,

Mexico,

Davide Piovesan,

Gannon University, Erie, PA, United

States

10:42am – Viscoelastic Characterization of Woven Dacron

for Aortic Grafts by Using Direction-Dependent Quasi-

Linear Viscoelasticity

Technical Paper Publication. IMECE2018-87806

Eleonora Tubaldi,

University of Arizona, Tucson, AZ, United

States,

Giovanni Ferrari, Prabakaran Balasubramanian, Ivan

Breslavskyi, Marco Amabili,

McGill University, Montreal, QC,

Canada

11:03am – 2-D Inverse Dynamics Knee Model: Aligning

Anatomical Knee Model With Squatting Kinematic Data

Using Ligament Forces

Technical Paper Publication. IMECE2018-88123

Jose M. Salinas, Dumitru Caruntu,

University of Texas

Rio Grande Valley, Edinburg, TX, United States

11:24am – A Dynamic Escape Problem of Molecular Motors

Technical Paper Publication. IMECE2018-88612

Dean Culver,

Army Research Laboratory, Durham, NC, United

States,

Bryan Glaz,

Army Research Laboratory

United States,

Samuel C. Stanton,

US Army Resear

Durham, NC, United States

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – WEDNESDAY, NOVEMBER 14

4-10 COMPUTATIONAL MODELING IN

BIOMEDICAL APPLICATIONS

4-10-1 Biomedical Modeling I

Third Floor, David L. Lawrence Convention Center, Room 311

10:00am–11:45am

Session Chair: Yi Hua,

University of Pittsburgh, Pittsburgh, PA,

United States

Session Co-Chair: Chao Liang,

Praxair, Inc., Tonawanda, NY,

United States

10:00am – Hydrodynamic Recruitment of Leukocytes Is

Inﬂuenced by Adherent Cell Morphology

Technical Paper Publication. IMECE2018-86502

Dhananjay Subramaniam,

University of Cincinnati, Cincinnati,

OH, United States,

David Gee,

Gannon University, Erie, PA,

United States

10:21am – Finite Element Modeling of Crimping and Sealing

of Metallic Braided Stents for Endovascular Repair (EVAR)

Technical Presentation. IMECE2018-87025

Jayendiran Raja,

Texas A&M University, Doha, Doha, Qatar,

Annie Ruimi,

Texas A&M University at Qatar, College Station,

TX, United States,

Bakr Nour,

Weill Cornell Medicine, Doha,

Doha, Qatar

10:42am – Degradation Modeling of Bioabsorbable Polymer

Stent

Technical Paper Publication. IMECE2018-88116

Pengfei Dong, Longzhen Wang, Linxia Gu,

University of

Nebraska–Lincoln, Lincoln, NE, United States

11:03am – Multiscale and Multiphysics Modeling of

Thrombus Biomechanics in Circulation

Technical Presentation. IMECE2018-88761

Alireza Yazdani, George Karniadakis,

Brown University,

Providence, RI, United States

11:24am – Numerical Study of Passive Micromixers for DNA

Analysis

Technical Presentation. IMECE2018-89133

Ritesh Agarwal, Tarek Abdel-Salam, Stephanie George,

East Carolina University, Greenville, NC, United States

4-11 MUSCULOSKELETAL AND SPORTS

BIOMECHANICS

4-11-1 Sports Related Brain Injury and Modeling

Third Floor, David L. Lawrence Convention Center, Room 315

10:00am–11:45am

Session Chair: Yuan Feng,

Shanghai Jiao Tong University,

Shanghai, China

Session Co-Chair: Parisa Saboori,

Manhattan College,

Riverdale, NY, United States

10:00am – Development of a Low-Cost Mechanical Model

of a Human Head

Technical Paper Publication. IMECE2018-87129

Grace Foltz, Elizabeth Tillotson, Beth Todd,

University of

Alabama, Tuscaloosa, AL, United States

10:21am – Study of Head Concussions on Female Soccer

Players

Technical Paper Publication. IMECE2018-88347

Peyman Honarmandi, Alessandra Palmisano,

Manhattan

College, Riverdale, NY, United States,

Iryna Stashuk,

City

College of New York, New York, NY, United States,

Shawn

Ladda,

Manhattan College, Riverdale, NY, United States

10:42am – Neck Loading Model of a Child in a Car Seat

Technical Paper Publication. IMECE2018-88363

Parisa Saboori, Gregory Bohn, Caitlin Hall, Kathia

Coronado, Veronica Valerio,

Manhattan College, Riverdale,

NY, United States

11:03am – A New Scaling Relationship Between Human

and Mouse Brain to Study Concussion

Technical Presentation. IMECE2018-90033

Haojie Mao,

Western University, Detroit, MI, United States,

Lihong Lu, Kewei Bian,

Western University, London, ON,

Canada

11:24am – Age Related Brain Atrophy and Vulnerability to

TBI

Technical Presentation. IMECE2018-87498

Arpad Bakonyi, Alan Faitelewicz, Siavash Hashemi, Shahab

Mansoorbaghaei,

City College of New York, New York, NY,

United States,

Ali Sadegh,

City University of New York, New

York, NY, United States

4-3 VIBRATION AND ACOUSTICS IN

BIOMEDICAL APPLICATIONS

4-3-1 Vibration Characteristics and

Characterisations

Third Floor, David L. Lawrence Convention Center, Room 309

1:45pm–3:30pm

Session Chair: Ping Zhao,

Hefei University of Technology,

Hefei, China

Session Co-Chair: Toshihiko Shiraishi,

Yokohama National

University, Yokohama, Japan

1:45pm – Acoustic Radiation of Axially Stepped-Thickness

Piezoelectric Cylindrical Shells

Technical Paper Publication. IMECE2018-86306

Ata Meshkinzar, Ahmed M. Al-Jumaily,

Auckland University

of Technology, Auckland, New Zealand

2:06pm – Investigation of the Scattering of Focused

Ultrasonic Waves at Bones

Technical Paper Publication. IMECE2018-87133

Christoph Schaal, Vibhav Durgesh,

California State

University, Northridge, CA, United States

2:27pm – Inﬂuence of Brain Cooling on Frequency

Characteristics of the Epileptic Focus and Its Surrounding

Area

chnical Paper Publication. IMECE2018-87288

Saya Kumano,

Yamaguchi University

Takashi

Saito,

Yamagu

Kenyu

Uehara,

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – WEDNESDAY, NOVEMBER 14

2:48pm – Determination of Mechanical Properties of

Human Skull With Modal Analysis

Technical Paper Publication. IMECE2018-88103

Ashkan Eslaminejad, Mohammad Hosseini Farid,

Mohammadreza Ramzanpour, Mariusz Ziejewski, Ghodrat

Karami,

North Dakota State University, Fargo, ND, United

States

4-8 DYNAMICS AND CONTROL OF

BIOMECHANICAL SYSTEMS

4-8-2 Dynamics and Control of Biomechanical

Systems II

Third Floor, David L. Lawrence Convention Center, Room 310

1:45pm–3:30pm

Session Chair: Davide Piovesan,

Gannon University, Erie, PA,

United States

Session Co-Chairs: Dumitru Caruntu,

University of Texas

Rio Grande Valley, Edinburg, TX, United States,

Bogdan Epureanu,

University of Michigan, Ann Arbor, MI,

United States

1:45pm – Develop a Flexible Regenerative Exoskeleton to

Assist Walking

Technical Paper Publication. IMECE2018-86779

Longhan Xie, Xiaodong Li,

South China University of

Technology, Guangzhou, China

2:06pm – Is Linear Camera Space Manipulation Impervious

to Systematic Distortions?

Technical Paper Publication. IMECE2018-87645

Felipe Martinez,

UASLP, San Luis Potosi, Mexico,

Adam

Mihalko, Lillian Blum,

Gannon University, Erie, PA, United

States,

Antonio Cardenas,

UASLP, San Luis Potosã, Mexico,

Davide Piovesan,

Gannon University, Erie, PA, United States

2:27pm – Robust and Iterative Learning Control of

Agonist/Antagonist Pair

Technical Presentation. IMECE2018-87939

Patrick J. Schimoler,

Allegheny General Hospital, Pittsburgh,

PA, United States,

Jeffrey S. Vipperman,

University of

Pittsburgh, Pittsburgh, PA, United States,

Mark Carl Miller,

Allegheny General Hospital, Pittsburgh, PA, United States

2:48pm – Design of Robotic System for Cognitive

Rehabilitation Based on Machine Vision

Technical Presentation. IMECE2018-88909

Haodong Chen, Ping Zhao, Kangren Zhao, Wenxiu Chen,

Hefei University of Technology, Hefei, Anhui, China

3:09pm – Design and Evaluation of Controllers for an

Elastically Strapped Lower Extremity Exoskeleton

Technical Presentation. IMECE2018-89965

Xianlian Zhou,

New Jersey Institute of Technology, Newark,

NJ, United States,

Xinyu Chen,

CFD Research Corporation,

Huntsville, AL, United States

4-10 COMPUTATIONAL MODELING IN

BIOMEDICAL APPLICATIONS

4-10-2 Biomedical Modeling II

Third Floor, David L. Lawrence Convention Center, Room 311

1:45pm–3:30pm

Session Chair: Yi Hua,

University of Pittsburgh, Pittsburgh, PA,

United States

Session Co-Chair: Chao Liang,

Praxair, Inc., Tonawanda, NY,

United States

1:45pm – Evaluation of Soft Material Fracture Behavior via

Indentation Testing With a Needle-Like Indenter

Technical Paper Publication. IMECE2018-87199

Takayuki Ishino, Atsushi Sakuma,

Kyoto Institute of

Technology, Kyoto, Japan

2:06pm – Validation of a Finite Element Model of the

Mechanical Performance of Surgical Knots of Varying

Topology

Technical Paper Publication. IMECE2018-87868

Arz Y. Qwam Alden, Andrew G. Geeslin, Peter A. Gustafson,

Western Michigan University, Kalamazoo, MI, United States

2:27pm – The Inﬂuence of Primary Blast Wave on the

Posterior Part of the Eyeball

Technical Paper Publication. IMECE2018-88113

Junfei Tong, Linxia Gu,

University of Nebraska–Lincoln,

Lincoln, NE, United States

2:48pm – A Computational Model of Continuous Hollow

Cerebrovascular Arterioles Using a Fractal L-System

Technical Paper Publication. IMECE2018-88511

Nicolas Cuitino,

Rutgers University, Piscataway, NJ, United

States,

Assimina Pelegri,

Rutgers University, East Brunswick,

NJ, United States,

Benjamin Johannesson,

Boyce

Technologies, Long Island City, NJ, United States

3:09pm – A Machine Learning Approach for Intraoperative

Reconstruction of Soft Tissue

Technical Presentation. IMECE2018-89929

Ye Han, Qi Wang, Yoed Rabin, Levent Burak Kara,

Carnegie

Mellon University, Pittsburgh, PA, United States

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – WEDNESDAY, NOVEMBER 14

4-11 MUSCULOSKELETAL AND SPORTS

BIOMECHANICS

4-11-2 Musculoskeletal Biomechanics

Third Floor, David L. Lawrence Convention Center, Room 315

1:45pm–3:30pm

Session Chair: Peyman Honarmandi,

Manhattan College,

Riverdale, NY, United States

Session Co-Chair: Yuan Feng,

Shanghai Jiao Tong University,

Shanghai, China

1:45pm – Evaluation of ACL Insertion Site Load

Transmission

Technical Presentation. IMECE2018-86829

Michael Smolinski, Brandon Marshall, Monica Linde,

Freddie H. Fu, Patrick Smolinski, William Slaughter,

University of Pittsburgh, Pittsburgh, PA, United States

2:06pm – Prophylactic Brace Design to Prevent ACL

Injuries

Technical Presentation. IMECE2018-88393

Gregory Bohn, Parisa Saboori,

Manhattan College, Riverdale,

NY, United States,

Lorraine Piccorelli,

Manhattan College,

Bronx, NY, United States

2:27pm – ACL Graft Position in the Tunnel

Technical Presentation. IMECE2018-86835

Junjun Zhu, Brandon Marshall, Xin Tang, Weimin Zhu,

Michael Smolinski, Joon Ho Wang, Monica Linde, Freddie

H. Fu, Patrick Smolinski,

University of Pittsburgh, Pittsburgh,

PA, United States

2:48pm – A Misoriented Biceps Tendon Repair Has No

Effect on Strength

Technical Presentation. IMECE2018-87415

Sean Delserro,

University of Pittsburgh, Pittsburgh, PA,

United States,

Tyler Madonna,

Rehab Neural Engineering

Labs, Pittsburgh, PA, United States,

Stephen Liu,

Penn

Orthopaedics, Exton, PA, United States,

Michael Smolinski,

University of Pittsburgh, Pittsburgh, PA, United States,

Joseph Styron,

Cleveland Clinic, Cleveland, OH, United

States,

Nicholas Vaudreuil, Brandon Brown, Patrick

Smolinski, Mark Miller,

University of Pittsburgh, Pittsburgh,

PA, United States,

Christopher Schmidt,

Orthopaedic

Specialists, Pittsburgh, PA, United States

3:09pm – Assessing Non-Uniform Stiffening of the Achilles

Tendon Noninvasively Using Surface Wave Elastography

Technical Presentation. IMECE2018-89879

Muhammad Salman,

Kennesaw State University, Marietta,

GA, United States,

Karim Sabra,

Georgia Institute of

Technology, Marietta, GA, United States

4-3 VIBRATION AND ACOUSTICS IN

BIOMEDICAL APPLICATIONS

4-3-2 Vibration Applications to Therapy and

Rehabilitation

Third Floor, David L. Lawrence Convention Center, Room 309

3:45pm–5:30pm

Session Chair: Takashi Saito,

Yamaguchi University, Ube/

Yamaguchi, Japan

Session Co-Chair: Toshihiko Shiraishi,

Yokohama National

University, Yokohama, Japan

3:45pm – Design of Planar 1-DOF Rehabilitation

Mechanisms via Kinematic-Mapping Motion Synthesis

Framework

Technical Presentation. IMECE2018-88785

Ping Zhao, Kangren Zhao, Wenxiu Chen, Haodong Chen,

Hefei University of Technology, Hefei, China

4:06pm – Fluid Impact Under Various Tapping Conditions

for Biomedical Application (Shirodhara)

Technical Paper Publication. IMECE2018-87341

Swathika M., Lakshmana Rao C., Balasubramanian

Venkatesh,

Indian Institute of Technology Madras, Chennai,

Tamil Nadu, India

4:27pm – A Study of a Mechanism of Cell Proliferation

Promotion of Cultured Osteoblasts by Mechanical Vibration

Technical Paper Publication. IMECE2018-87364

Toshihiko Shiraishi, Akitoshi Nishijima,

Yokohama National

University, Yokohama, Japan

4:48pm – Experimental Identiﬁcation of Model Parameters

and the Statistical Processing Using a Nonlinear Oscillator

Applied to EEG Analysis

Technical Paper Publication. IMECE2018-88112

Kenyu Uehara,

Yamaguchi University, Ube, Japan,

Takashi

Saito,

Yamaguchi University, Ube/Yamaguchi, Japan

4-4 BIOMEDICAL IMAGING AND TISSUE

CHARACTERIZATION

4-4-1 Tissue Characterisations

Third Floor, David L. Lawrence Convention Center, Room 308

3:45pm–5:30pm

Session Chair: Margaret Nowicki,

United States Military

Academy, West Point, NY, United States

Session Co-Chair: Xiaoning Jiang,

NC State University,

Raleigh, NC, United States

3:45pm – Relating Bone Intra-Cortical Elastic Stiffness to

EDX Spectroscopy Mineralization Measurements

Technical Paper Publication. IMECE2018-86233

Ilige Hage, Remi Hage,

Notre Dame University-Louaize, Zouk

Mosbeh, Lebanon,

Charbel Seif,

American University of Beirut,

Beirut, Lebanon,

Ramsey Hamade,

American University of

Beirut, Beirut, Riad El Solh, Lebanon

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – WEDNESDAY, NOVEMBER 14

4:06pm – Human Mandibular Bone Density Distribution:

Image Analysis and Patient-Speciﬁc Bone Remodeling

Simulation

Technical Presentation. IMECE2018-86866

Kangning Su, Kayla Reigh,

Pennsylvania State University,

State College, PA, United States,

Li Yuan,

Shenzhen People’s

Hospital, 2nd Clinical Medical College of Jinan University,

Shen Zhen, China,

Jie Yang,

Temple University, Philadelphia,

PA, United States,

Jing Du,

Pennsylvania State University,

State College, PA, United States

4:27pm – A Modular Test Platform for Micromechanical

Tensile Testing of Soft Biomaterials

Technical Paper Publication. IMECE2018-87259

Wilson Eng, Max Kim, Anand Ramasubramanian, Sang-

Joon (John) Lee,

San Jose State University, San Jose, CA,

United States

4:48pm – Compliance Effect on the Flow Condition in

Vascular In Vitro Experiments

Technical Paper Publication. IMECE2018-87362

Masami Matsuura, Simon Tupin, Makoto Ohta,

Tohoku

University, Sendai, Miyagi, Japan

5:09pm – Temporal Evolution of Abdominal Aortic Wall

Stress Using Image-Based Vascular Mechanical

Characterization (iV-MeCh) Technique

Technical Presentation. IMECE2018-88275

Prahlad Menon,

University of Pittsburgh, Pittsburgh, PA,

United States,

Mirunalini. Thirugnanasambandam,

University

of Texas at San Antonio, San Antonio, TX, United States,

Stephane Avril,

Ecole Nationale Supérieure Des Mines, Saint-

Etienne, France,

Ender Finol, Senol Piskin, Tejas Canchi,

University of Texas at San Antonio, San Antonio, TX, United

States,

Christof Karmonik,

The Methodist Hospital, Houston,

TX, United States,

Soroosh Sanatkhani,

University of

Pittsburgh, Pittsburgh, PA, United States

4-8 DYNAMICS AND CONTROL OF

BIOMECHANICAL SYSTEMS

4-8-3 Dynamics and Control of Biomechanical

Systems III

Third Floor, David L. Lawrence Convention Center, Room 310

3:45pm–5:30pm

Session Chair: Dumitru Caruntu,

University of Texas

Rio Grande Valley, Edinburg, TX, United States

Session Co-Chairs: Davide Piovesan,

Gannon University, Erie,

PA, United States,

Souransu Nandi,

University at Buffalo, State

University of New York, Buffalo, NY, United States,

Dan Wang,

Old Dominion University, Norfolk, VA, United States

3:45pm – Arterial Wall Motion and its Dynamic Modeling for

Arterial Stiffness and Damping

Technical Paper Publication. IMECE2018-86883

Dan Wang, L

inda Vahala, Thomas Alberts,

Old Dominion

University, Norfolk, VA, United States,

Zhili Hao,

Old Dominion

University, Virginia Beach, VA, United States

4:06pm – Material and Posture Modeling for Sleeping on

Soft Low-Density Porous Material

Technical Paper Publication. IMECE2018-87249

Takahiro Yamaguchi, Hajime Kimura, Atsushi Sakuma,

Kyoto Institute of Technology, Kyoto, Japan,

Kazushige

Takahashi, Shigetoshi Mimura,

Toyo Quality One

Corporation, Kawagoe, Japan

4:27pm – Hypo/Hyperglycemic Constrained Design of IV

Insulin Control for Type 1 Diabetic Patients With Meal and

Initial Condition Uncertainties Using Sequential Quadratic

Programming

Technical Paper Publication. IMECE2018-87742

Souransu Nandi, Tarunraj Singh,

University at Buffalo,

State University of New York, Buffalo, NY, United States

4:48pm – Chance Constraint Based Design of IV Insulin

Control for Type 1 Diabetic Patients Under Model and Meal

Uncertainties

Technical Paper Publication. IMECE2018-87759

Souransu Nandi, Tarunraj Singh,

University at Buffalo, State

University of New York, Buffalo, NY, United States

4-10 COMPUTATIONAL MODELING IN

BIOMEDICAL APPLICATIONS

4-10-3 Biomedical Modeling III

Third Floor, David L. Lawrence Convention Center, Room 311

3:45pm–5:30pm

Session Chair: Junfei Tong,

University of Nebraska–Lincoln,

Lincoln, NE, United States

Session Co-Chair: Chao Liang,

Praxair, Inc., Tonawanda, NY,

United States

3:45pm – Fluid-Structure Interaction of Blood Flow in

Human Aorta Under Dynamic Conditions: A Numerical

Approach

Technical Paper Publication. IMECE2018-87793

Massimo Milani, Francesca Martelli, Luca Montorsi,

University of Modena and Reggio Emilia, Reggio Emilia, Italy,

Guido Ligabue, Pietro Torricelli,

University of Modena and

Reggio Emilia, Modena, Italy

4:06pm – Reconstruction of Swirling Blood Flow in the

Heart and Aorta on the Basis of Measurements of Dynamic

Geometry and Elastic Properties of the Flow Channel

Technical Paper Publication. IMECE2018-87680

Eugeny Talygin, Shota Zhorzholiani, Marina Tkhagapsova,

Yuriy Tsygankov, Andrey Agafonov, Alexander Gorodkov,

Gennadiy Kiknadze, Leo Bockeria,

Bakulev Research Center

for Cardiovascular Surgery, Moscow, Russia

4:27pm – Virtual Septoplasty Using Computational Fluid

Dynamics

Technical Presentation. IMECE2018-88153

Masoud Ghorbani Moghaddam,

Medical College of

Wisconsin, Milwaukee, WI, United States,

Julia S. Kimbell,

University of North Carolina, Chapel Hill, NC, United States,

Dennis O. Frank-Ito,

Duke University

States,

John S. Rhee, Guilherme J.M. Garcia,

Medical

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – WEDNESDAY, NOVEMBER 14

4:48pm – Comparison of Ablation Volume Produced With

Multi-Tine Dry Type and Wet Type Electrodes During Radio

Frequency Ablation: An In Vitro Study

Technical Paper Publication. IMECE2018-88588

Sundeep Singh, Ramjee Repaka,

Indian Institute of

Technology Ropar, Rupnagar, Punjab, India

5:09pm – Spatiotemporal Organization of Excitation and

Mechanical Waves During Life-Threatening Re-Entrant

Cardiac Arrhythmias

Technical Presentation. IMECE2018-89458

Amirhossein Molavi Tabrizi, Ata Mesgarnejad,

Northeastern

University, Boston, MA, United States,

Jan Christoph,

Stephan Luther,

Max Planck Institute for Dynamics and Self-

Organization, Göttingen, Germany,

Maher N. Bazzi,

University

of Kansas School of Medicine-Wichita, Wichita, KS, United

States,

Alain Karma,

Northeastern University, Boston, MA,

United States

4-11 MUSCULOSKELETAL AND SPORTS

BIOMECHANICS

4-11-3 Musculoskeletal and Sport Biomechanics

Third Floor, David L. Lawrence Convention Center, Room 315

3:45pm–5:30pm

Session Chair: Parisa Saboori,

Manhattan College, Riverdale,

NY, United States

Session Co-Chair: Peyman Honarmandi,

Manhattan College,

Riverdale, NY, United States

3:45pm – Anteior Cruciate Ligament Graft-Tunnel Relative

Motion

Technical Presentation. IMECE2018-86816

Junjun Zhu, Brandon Marshall, Xin Tang, Weimin Zhu,

Michael Smolinski, Monica Linde, Joon Ho Wang, Freddie

H. Fu, Patrick Smolinski,

University of Pittsburgh, Pittsburgh,

PA, United States

4:06pm – Finite Element Analysis of Dynamics of Human

Muscle Compressed by Fabric Sleeve

Technical Paper Publication. IMECE2018-87304

Shodai Ueda, Atsushi Sakuma,

Kyoto Institute of Technology,

Kyoto, Japan

4:27pm – Assessment of Muscle Stiffness while Using

Single Axis Accelerometers

Technical Presentation. IMECE2018-89728

Carlos Munoz, Muhammad Salman,

Kennesaw State

University, Marietta, GA, United States

4:48pm – Computational Prediction of Neck

Musculoskeletal Loading in Walking and Running with

Head Supported Mass

Technical Presentation. IMECE2018-89808

Xianlian Zhou,

New Jersey Institute of Technology, Newark,

NJ, United States,

Xinyu Chen, Paulien Roos, Phillip Whitley,

CFD Research Corporation, Huntsville, AL, United States

5:09pm – Gait Analysis for Muscular Forces Evaluation in

Human Movement: Integration Protocol of Typical

Measurement Methods

Technical Paper Publication. IMECE2018-87670

Massimo Milani, Luca Fontanili, Luca Montorsi,

University of

Modena and Reggio Emilia, Reggio Emilia, Italy,

Giordano

Valente,

Medical Technology Laboratory, Rizzoli Orthopaedic

Institute, Bologna, Italy

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – WEDNESDAY, NOVEMBER 14

THURSDAY, NOVEMBER 15

4-1 BIOMEDICAL AND BIOTECHNOLOGY

PLENARY PRESENTATION

4-1-2 Biomedical and Biotechnology Plenary II

Third Floor, David L. Lawrence Convention Center, Room 304

8:00am–8:45am

8:00am – New Directions in Medical Ultrasound

Plenary Presentation. IMECE2018-90095

Mostafa Fatemi,

Mayo Clinic, Rochester, MN, United States

4-4 BIOMEDICAL IMAGING AND TISSUE

CHARACTERIZATION

4-4-2 Biomedical Imaging and Characterization

Third Floor, David L. Lawrence Convention Center, Room 308

8:55am–10:40am

Session Chair: Mostafa Fatemi,

Mayo Clinic, Rochester, MN,

United States

Session Co-Chair: Assimina Pelegri,

Rutgers University, East

Brunswick, NJ, United States

8:55am – Analysis of High Frequency Ultrasound Power

Spectrum Peak Density for Detecting Soft Tissue

Microstructure/Pathology

Technical Presentation. IMECE2018-86568

Jeremy Stromer,

University of Connecticut, Storrs, CT, United

States,

Koushik Paul, Jorge Fernandez Losada, Leila Ladani,

University of Texas at Arlington, Arlington, TX, United States

9:10am – Deep Convolutional Neural Networks for Breast

Image Analysis on Holographic Microwave Imaging

Technical Paper Publication. IMECE2018-86765

Lulu Wang, Jinzhang Xu,

Hefei University of Technology,

Hefei, China

9:25am – Investigating the Progression of Alzheimer’s

Disease Using Digital Volume Correlation Algorithm and

Strain as a Metric

Technical Paper Publication. IMECE2018-87563

Annastacia McCarty, Sarah Bentil,

Iowa State University,

Ames, IA, United States

9:40am – Temporal Evolution of the Walls of Elastase-

Induced Rabbit Aneurysms

Technical Presentation. IMECE2018-88290

Chao Sang,

University of Pittsburgh, Pittsburgh, PA, United

States,

David F. Kallmes,

Mayo Clinic, Rochester, MN, United

States,

Simon C. Watkins, Anne M. Robertson,

University of

Pittsburgh, Pittsburgh, PA, United States

9:55am – A Computational Simulation of Brain White Matter

Accounting for Structural Anisotropy in Frequency Domain

Technical Presentation. IMECE2018-88488

Xuehai Wu, Daniel Sullivan,

Rutgers University, Piscataway,

NJ, United States,

John Georgiadis,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States,

Assimina

Pelegri,

Rutgers University, East Brunswick, NJ, United States

10:10am – Optical Microlaser Sensing Devices for Brain

Activity Monitoring

Technical Presentation. IMECE2018-89316

Maurizio Manzo,

University of North Texas, Denton, TX,

United States

4-5 BIOMATERIALS AND TISSUE:

MODELLING, SYNTHESIS, FABRICATION

AND CHARACTERIZATION

4-5-1 Biomaterials and Tissue I: Fabrication

Third Floor, David L. Lawrence Convention Center, Room 309

8:55am–10:40am

Session Chair: Anil Saigal,

Tufts University, Medford, MA,

United States

Session Co-Chair: Seyed Allameh,

Northern Kentucky

University, Newport, KY, United States

8:55am – Stretch-and-Folding Method to Mass Produce

Biomedical Nanoﬁbers

Technical Presentation. IMECE2018-87975

Mingkun Wang, Lanziye He, Chunxiao Cui, Li-Hsin Han,

Drexel University, Philadelphia, PA, United States

9:16am – Effect of Laser Texturing and Plasma Nitriding on

Titanium

Technical Presentation. IMECE2018-89446

Mohammad Hossan, Morshed Khandaker,

University of

Central Oklahoma, Edmond, OK, United States

9:37am – In Situ Contactless 3D Printing of Cellular

Structures

Technical Presentation. IMECE2018-89651

Sarah Mishriki, Abdel Rahman Abdel Fattah,

Elvira Meleca,

McMaster University, Hamilton, ON, Canada,

Tobias Kammann,

Friedrich Schiller University Jena, Jena,

Germany,

Rakesh Sahu, Fei Geng, Ishwar K. Puri,

McMaster

University, Hamilton, ON, Canada

9:58am – Biofabrication of Zonally-Stratiﬁed Construct for

Cartilage Repair

Technical Presentation. IMECE2018-89682

Yang Wu,

Pennsylvania State University, State College, PA,

United States,

Aman Dhawan,

Pennsylvania State University,

Hershey, PA, United States,

Ibrahim Ozbolat,

Pennsylvania

State University, University Park, PA, United States

10:19am – A New Aspiration-Assisted Bioprinting

Technique for Tissue Biofabrication

Technical Presentation. IMECE2018-89799

Bugra Ayan, Dong Nyoung Heo, Madhuri Dey, Adomas

Pavilianskas, Zhifeng Zhang, Mecit Altan Alioglu, Corina S.

Drapaca, Ibrahim Ozbolat,

Pennsylvania State University,

University Park, PA, United States

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – THURSDAY, NOVEMBER 15

4-7 BIOMEDICAL DEVICES

4-7-1 Detection and Monitoring Biomedical Devices

Third Floor, David L. Lawrence Convention Center, Room 310

8:55am–10:40am

Session Chair: Margaret Nowicki,

United States Military

Academy, West Point, NY, United States

Session Co-Chair: Chao Liang,

Praxair, Inc., Tonawanda, NY,

United States

8:55am – Design and Validation of a Low-Cost Non-Invasive

Device to Detect Overnight Hypoglycemia

Technical Paper Publication. IMECE2018-86009

Jonathan Lesko, Stephen Seibert, Yong Zhu,

Wilkes

University, Wilkes-Barre, PA, United States

9:16am – Design and Validation of a Low-Cost Heart Health

Monitoring Device

Technical Paper Publication. IMECE2018-86031

Nuzhat Ahmed, Lucas Kline, Yong Zhu,

Wilkes University,

Wilkes-Barre, PA, United States

9:37am – A Numerical Study of the Inﬂuence of Different

Factors on Mechanical Characterization of Tumors via a 2D

Tactile Sensor

Technical Paper Publication. IMECE2018-87669

Zhili Hao, Cristina Genoese-Zerbi,

Old Dominion University,

Virginia Beach, VA, United States,

James Jobe,

Old Dominion

University, Williamsburg, VA, United States,

Kylee Kohl,

Old

Dominion University, Virginia Beach, VA, United States,

Nathan

Abshier, Timothy Watjen,

Old Dominion University, Norfolk,

VA, United States,

Charles Tison,

Old Dominion University,

Virginia Beach, VA, United States

9:58am – Smartphone-Based Device for Monitoring

Chemical Pollutants in Water

Technical Paper Publication. IMECE2018-86893

Samuel Ozeh,

Purdue University Northwest, Hammond, IN,

United States,

A. G. Agwu Nnanna,

University of Texas of the

Permian Basin, Odessa, TX, United States,

Justus C.

Ndukaife,

Vanderbilt University, Nashville, TN, United States

10:19am – A Small Radio Frequency Sensor for Microwave

Tumor Ablation

Technical Paper Publication. IMECE2018-86766

Lulu Wang,

Hefei University of Technology, Hefei, China,

Mengke Ge, Bensheng Qiu,

University of Science and

Technology of China, Hefei, China

4-10 COMPUTATIONAL MODELING IN

BIOMEDICAL APPLICATIONS

4-10-4 Biomedical Modeling IV

Third Floor, David L. Lawrence Convention Center, Room 311

8:55am–10:40am

Session Chair: Shanzhong (Shawn) Duan,

Saint Martin’s

University, Lacey, WA, United States

Session Co-Chair: Chao Liang,

Praxair, Inc., Tonawanda, NY,

United States

8:55am – Monte Carlo Simulation of the Laser-Induced

Temperature Dynamics in Very Thin Scattering and

Absorbing Biological Layer Piles

Technical Paper Publication. IMECE2018-86545

Reginald Eze,

City University of New York, Long Island City,

NY, United States

9:10am – Patellofemoral Pain Syndrome: Sensitivity

Analysis of Muscle Parameters for Expedited Recovery

Utilizing an OpenSim Model for Lower Extremities

Technical Paper Publication. IMECE2018-87042

Adam Novotny, Manish Paliwal,

The College of New Jersey,

Ewing, NJ, United States

9:25am – Computational Modeling of Coagulopathy for

Decision Support

Technical Paper Publication. IMECE2018-87683

Brandon Saltsman, Carey Balaban, Jeffrey S. Vipperman,

University of Pittsburgh, Pittsburgh, PA, United States

9:40am – A Stochastic Finite Element Method for

Simulating Trabecular Bone

Technical Paper Publication. IMECE2018-87869

Saif Alrafeek

, James R. Jastifer, Peter A. Gustafson,

Western Michigan University, Kalamazoo, MI, United States

9:55am – A Biomechanical and Thermal Analysis for Bone

Augmentation of the Proximal Femur

Technical Paper Publication. IMECE2018-88583

Amirhossein Farvardin, Mahsan Bakhtiarinejad, Michael

Pozin, Mehran Armand,

Johns Hopkin University, Baltimore,

MD, United States

10:10am – Thermal Analysis of Marginal Conditions to

Facilitate Cryopreservation by Vitriﬁcation

Technical Presentation. IMECE2018-89607

Purva Joshi, Yoed Rabin,

Carnegie Mellon University,

Pittsburgh, PA, United States

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – THURSDAY, NOVEMBER 15

4-14 BIOTRANSPORT (FLUID. HEAT AND

MASS)

4-14-1 Biotransport

Third Floor, David L. Lawrence Convention Center, Room 315

8:55am–10:40am

Session Chair: Anne Schmitz,

Gannon University, Erie, PA,

United States

Session Co-Chair: Cahit A. Evrensel,

Ankara University,

Ankara, Turkey

8:55am – Efﬁcient Uncertainty Quantiﬁcation for

Biotransport in Tumors With Uncertain Material Properties

Technical Paper Publication. IMECE2018-86216

Alen Alexanderian, William Reese, Ralph C. Smith,

North Carolina State University, Raleigh, NC, United States,

Meilin Yu,

University of Maryland Baltimore County, Baltimore,

MD, United States

9:16am – Inﬂuence of Non-Newtonian Rheology on Mass

Transfer From a Bioﬂuid in Separated and Reattached

Flows

Technical Paper Publication. IMECE2018-86809

Khaled J. Hammad,

Central Connecticut State University,

Simsbury, CT, United States

9:37am – CFD Model of White Thrombus Formation by High

Shear Blood Flows With Consideration of Transport

Process of Concentration and Aggregation Process, and

Related Thrombus Visualization

Technical Presentation. IMECE2018-88379

Masaaki Tamagawa,

Kyushu Institute of Technology,

Kitakyushu, Japan

9:58am – Optimum Frequency Range for Enhancing Cough

Clerance Through Flow Oscillations

Technical Presentation. IMECE2018-89987

Duygu L. Tuna, Altay Ünal, Fikret Ari,

Ankara University,

Ankara, Turkey,

Peter Krumpe,

University of Nevada, Reno,

NV, United States,

Cahit A. Evrensel,

Ankara University,

Ankara, Turkey

10:19am – Eletrokinetic Remediation of Contaminated Soils

With Chromium

Technical Paper Publication. IMECE2018-87552

André Ribeiro, Jorge Araújo,

CVR—Centro para a Valorização

de Resíduos, Guimarães, Portugal,

Cândida Vilarinho, Joana

Carvalho,

University of Minho, Guimarães, Portugal

4-2 DAMAGE BIOMECHANICS

4-2-3 Damage Biomechanics III: Materials

Characterization, Modeling and Analysis

Third Floor, David L. Lawrence Convention Center, Room 308

10:50am–12:35pm

Session Chair: Sikhanda S Satapathy,

ARL WMRD, APG, MD,

United States

Session Co-Chair: Karim Muci-Kuchler,

South Dakota School

of Mines and Technology, Rapid City, SD, United States

10:50am – Brain Tissue Material and Damage Properties for

Blast Trauma

Technical Paper Publication. IMECE2018-88419

Soroush Assari, Kurosh Darvish,

Temple University,

Philadelphia, PA, United States

11:05am – Characterization of Injured Brain Tissue After

Controlled Cortical Impact (CCI) Using a Mouse Model

Technical Presentation. IMECE2018-86109

Suhao Qiu,

Shanghai Jiao Tong University, Shanghai, China,

Wei Chen, Shanshan Qiu, Jianfeng Zeng, Mingyuan Gao,

Luyang Tao,

Soochow University, Suzhou, China,

Ankush

Aggarwal,

Swansea University, Swansea, United Kingdom,

Chung-Hao Lee,

University of Oklahoma, Norman, OK, United

States,

Yuan Feng,

Shanghai Jiao Tong University, Shanghai,

China

11:20am – A Comparison of Neuronal Membrane

Mechanoporation Strain Behavior for

Dilauroylphosphatidylcholine (DLPC) and 1-Palmitoyl-2-

Oleoylphosphatidylcholine (POPC) Phospholipids

Technical P

resentation. IMECE2018-89831

Folly Crawford, Michael Murphy,

Mississippi State University,

Starkville, MS, United States,

S. Mun,

Mississippi State

University, Mississippi State, MS, United States,

R.K. Prabhu,

Mississippi State University, Starkville, MS, United States

11:35am – Failure and Damage of Mineralized Tissue Under

Tension

Technical Presentation. IMECE2018-89207

Rizacan Sarikaya, Anil Misra,

University of Kansas,

Lawrence, KS, United States

11:50am – A Non-Linear Multi-Axial Fatigue Damage Model

for the Intervertebral Disc Annulus

Technical Presentation. IMECE2018-89755

Adhitya Vikraman Subramani,

Pennsylvania State University,

University Park, PA, United States,

Shruti Motiwale,

Tesla

Motors, Palo Alto, CA, United States,

Xianlian Zhou,

CFDRC,

Huntsville, AL, United States,

Reuben Kraft,

Pennsylvania

State University, University Park, PA, United States

12:05pm – Towards a Better Understanding of Optic Nerve

Biomechanics Using a Multimaterial Finite Element Model

Technical Presentation. IMECE2018-89874

Rika Carlsen,

Robert Morris University, Moon Township, PA,

United States,

Anirban Jana,

Pittsbur

Center, Carnegie Mellon University, Pittsburgh, PA, United

States

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – THURSDAY, NOVEMBER 15

4-5 BIOMATERIALS AND TISSUE:

MODELLING, SYNTHESIS, FABRICATION

AND CHARACTERIZATION

4-5-2 Biomaterials and Tissue II: Modelling

Third Floor, David L. Lawrence Convention Center, Room 309

10:50am–12:35pm

Session Chair: Seyed Allameh,

Northern Kentucky University,

Newport, KY, United States

Session Co-Chair: Karen Chang Yan,

The College of New

Jersey, Ewing Township, NJ, United States

10:50am – Cellular Automaton and Finite Element Hybrid

Simulation to Predict Axonal Extension Enhancement of

Nerve Cell Under Mechanical Stimulation

Technical Paper Publication. IMECE2018-86653

Shota Takeda, Yoshihiro Tomita, Eiji Nakamachi,

Doshisha

University, Kyotanabe, Kyoto, Japan

11:11am – Some Considerations for Hyperelastic Modeling

of the Brain Tissue

Technical Presentation. IMECE2018-87072

Aref Samadi-Dooki, George Voyiadjis,

Louisiana State

University, Baton Rouge, LA, United States

11:32am – On Continuum Based Multiscale Modelling of

Engineered Soft Tissue Constructs

Technical Paper Publication. IMECE2018-88482

Karen Chang Yan,

The College of New Jersey, Ewing

Township, NJ, United States,

Jacob Bennedsen,

The College

of New Jersey, Lebanon, NJ, United States

11:53am – Brazier Buckling in Grain Stems: Modeling and

Understanding the Role of Functional Grading and Other

Structural Characteristics

Technical Presentation. IMECE2018-89062

Christopher Stubbs,

New York University, Brooklyn, NY,

United States,

Wenhuan Sun,

Carnegie Mellon University,

Pittsburgh, PA, United States,

Douglas D. Cook,

Brigham

Young University, Provo, UT, United States

12:14pm – Nonlinear Contact Mechanics for the Indentation

of Cellular Cylindrical Bodies

Technical Presentation. IMECE2018-89082

Amy Dagro, K.T. Ramesh,

Johns Hopkins University,

Baltimore, MD, United States

4-7 BIOMEDICAL DEVICES

4-7-2 Surgical Assistive Devices

Third Floor, David L. Lawrence Convention Center, Room 310

10:50am–12:35pm

Session Chair: Lulu Wang,

Hefei University of Technology,

Hefei, China

Session Co-Chair: Maurizio Manzo,

University of North Texas,

Denton, TX, United States

10:50am – Pre-Surgical Planning of Screw-Position

Arrangement for the Femur Fractures With a Custom APP

Technical Paper Publication. IMECE2018-86013

Chen-Yuan Chung, Jiing-Yih Lai, He-Kai Young, Han-Yuan

Gao,

National Central University, Taoyuan City, Taiwan

11:11am – Biomedical Devices Using Shape Memory

Polymer Foams for Treatment of Intracranial Aneurysms

Technical Paper Publication. IMECE2018-86120

Jingyu Wang, Jishan Luo, Robert Kunkel, Yingtao Liu,

University of Oklahoma, Norman, OK, United States,

Bradley

Bohnstedt,

University of Oklahoma, Oklahoma City, OK,

United States,

Chung-Hao Lee,

University of Oklahoma,

Norman, OK, United States

11:32am – Modiﬁed Laparoscopic Tool for Enhanced Haptic

Feedback

Technical Paper Publication. IMECE2018-86345

Rajesh Kumar, Sudipto Mukherjee,

Indian Institute of

Technology Delhi, New Delhi, India

11:53am – A Novel Stent Graft that Contains Superelastic

Nitnol and Ultra-Stretchable ePTFE for the Hemorrhage

Control

Technical Presentation. IMECE2018-87829

Moataz Elsisy, Yanfei Chen, Brya

n Tillman, Catherine Go,

Sung Kwon Cho, William Clark, Tae hur, Yicheng Ding,

Youngjae Chun,

University of Pittsburgh, Pittsburgh, PA,

United States

12:14pm – Demonstration and Experimental Validation of

Plastic-Encased Resonant Ultrasonic Piezoelectric

Actuator for MRI-Guided Surgical Robots

Technical Paper Publication. IMECE2018-87963

Paulo Carvalho, Christopher Nycz, Katie Gandomi, Gregory

Fischer,

Worcester Polytechnic Institute, Worcester, MA,

United States

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – THURSDAY, NOVEMBER 15

4-10 COMPUTATIONAL MODELING IN

BIOMEDICAL APPLICATIONS

4-10-5 Biomedical Modeling V

Third Floor, David L. Lawrence Convention Center, Room 311

10:50am–12:35pm

Session Chair: Shanzhong (Shawn) Duan,

Saint Martin’s

University, Lacey, WA, United States

Session Co-Chair: Chao Liang,

Praxair, Inc., Tonawanda, NY,

United States

10:50am – The Wisdom of Crowds Approach to Inﬂuenza-

Rate Forecasting

Technical Paper Publication. IMECE2018-86559

Jeff Morgan,

Joint Research and Development, Inc., Stafford,

VA, United States,

Otto Wilson,

The Catholic University of

America, Washington, DC, United States,

Prahlad Menon,

University of Pittsburgh, Pittsburgh, PA, United States

11:11am – Non-Linear Analysis of Bio-Structures Through

Reﬁned Beam Models

Technical Paper Publication. IMECE2018-86848

Daniele Guarnera, Erasmo Carrera, Ibrahim Kaleel, Alfonso

Pagani,

Politecnico di Torino, Torino, Italy,

Marco Petrolo,

Politecnico di Torino, Turin, Italy

11:32am – Differential Plate Lengths in Long Bone Fixation

Can Increase Peak Strains

Technical Presentation. IMECE2018-87557

David Jordan, Mark Miller,

University of Pittsburgh,

Pittsburgh, PA, United States,

Alexander Kharlamov,

Allegheny General Hospital, Pittsburgh, PA, United States

11:53am – Modeling Heat Regulation With a Structured

Mesh, Finite Volume Approach in a Voxelized Domain

Technical Paper Publication. IMECE2018-88036

Rohan Amare, Steven Eckels, Amir Bahadori,

Kansas State

University, Manhattan, KS, United States

12:14pm – Analysis of Temperature in Surgical-Drilling of

Ex-vivo Human Femurs Using Probabilistic Approach

Technical Presentation. IMECE2018-88811

Pandithevan Ponnusamy, Prasannavenkadesan

Varatharajan, Vinayaga Muruga Pandy Natarajan,

Indian

Institute of Information Technology Design and Manufacturing

Kancheepuram, Chennai, Tamilnadu, India

4-14 BIOTRANSPORT (FLUID. HEAT AND

MASS)

4-14-2 Heat Transfer and Fluid

Third Floor, David L. Lawrence Convention Center, Room 315

10:50am–12:35pm

Session Chair: X. Gary Tan,

U.S. Naval Research Lab,

Washington, DC, United States

Session Co-Chair: Anne Schmitz,

Gannon University, Erie, PA,

United States

10:50am – Numerical Investigation of Heat Transfer in

Tissues During Therapeutic Hyperthermia

Technical Paper Publication. IMECE2018-86485

Saeed Tiari, Mahboobe Mahdavi, Kinjalkumar Chauhan,

Davide Piovesan,

Gannon University, Erie, PA, United States

11:11am – Investigation of Radio-frequency Rewarming as

a Means to Reduce Thermomechanical Stress During Ice-

Free Rewarming From Cryopreservation Storage

Technical Presentation. IMECE2018-89224

Prem Solanki, Yoed Rabin,

Carnegie Mellon University,

Pittsburgh, PA, United States

11:32am – Review of Diffusive Transport in the Vitreous

Humor: Experimental and Analytical Studies

Technical Presentation. IMECE2018-89421

Anita Penkova, Satwindar Sadhal,

University of Southern

California, Los Angeles, CA, United States

11:53am – Thermal Conductivity of Cryoprotective Agents

in the Presence of Silica-Coated and Uncoated Iron-Oxide

Nanoparticles

Technical Presentation. IMECE2018-89584

Lili Ehrlich,

Carnegie Mellon University, Pittsburgh, PA, United

States,

Zhe Gao, John Bischof,

University of Minnesota,

Minneapolis, MN, United States,

Yoed Rabin,

Carnegie Mellon

University, Pittsburgh, PA, United States

4-2 DAMAGE BIOMECHANICS

4-2-2 Damage Biomechanics II: Ballistic Impact and

Blast Effects and Analysis

Third Floor, David L. Lawrence Convention Center, Room 308

2:05pm–3:50pm

Session Chair: Reuben Kraft,

Pennsylvania State University,

University Park, PA, United States

Session Co-Chair: Ashfaq Adnan,

University of Texas

Arlington, Arlington, TX, United States

2:05pm – The Strain Rates of the Brain and Skull Under

Dynamic Loading

Technical Paper Publication. IMECE2018-88300

Mohammad Hosseini Farid, Ashkan Eslaminejad,

Mohammadreza Ramzanpour, Mariusz Ziejewski,

Ghodrat Karami,

North Dakota State University

United States

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – THURSDAY, NOVEMBER 15

2:20pm – Computational Analysis for Validation of Blast

Induced Traumatic Brain Injury and Protection of Combat

Helmet

Technical Paper Publication. IMECE2018-87689

X. Gary Tan, Amit Bagchi,

U.S. Naval Research Laboratory,

Washington, DC, United States

2:35pm – Indent Depth in the Clay Backing for Ceramic

Armor

Technical Paper Publication. IMECE2018-88284

Timothy Zhang, Sikhanda S. Satapathy,

ARL WMRD, APG,

MD, United States

2:50pm – Development of an Experiment to Visualize Air

Flow Into Ballistics Gelatin Targets Shot With Small Caliber

Projectiles

Technical Presentation. IMECE2018-89706

Karim Muci-Kuchler, Steven Dixler, Aaron Bost,

South

Dakota School of Mines and Technology, Rapid City, SD,

United States

3:05pm – A Multiscale Approach to Model

Mechanoporation Damage in Neurons

Technical Presentation. IMECE2018-89588

A.H. Bakhtiary,

Mississippi State University, Mississippi State,

MS, United States,

Michael Murphy,

Mississippi State

University, Starkville, MS, United States,

M.D. Jones,

Cardiff

University, Cardiff, Wales,

D. Bammann, R.K. Prabhu,

Mississippi State University, Starkville, MS, United States

3:20pm – Mapping Combat Helmet Design and Operational

Parameter Trade Spaces Based on Ballistic Threats and

Head Injury Severity

Technical Presentation. IMECE2018-86725

Peter Matic, Robert Saunders,

U.S. Naval Research

Laboratory, Washington, DC, United States

4-5 BIOMATERIALS AND TISSUE:

MODELLING, SYNTHESIS, FABRICATION

AND CHARACTERIZATION

4-5-3 Biomaterials and Tissue III: Sythesis and

Characteriazation

Third Floor, David L. Lawrence Convention Center, Room 309

2:05pm–3:50pm

Session Chair: Karen Chang Yan,

The College of New Jersey,

Ewing Township, NJ, United States

Session Co-Chair: Anil Saigal, T

ufts University, Medford, MA,

United States

2:05pm – Development of Chemotherapy System Using

Plasma Activated Medium to Enhance PC12 Axonal

Extension

Technical Paper Publication. IMECE2018-86630

Takanobu Haccho, Hiroshi Ichikawa, Koji Yamamoto,

Yusuke Morita, Eiji Nakamachi,

Doshisha University, Kyoto,

Japan

2:20pm – Development of Three-Dimensional DC Electric

Field Stimulation Bio-Reactor for Axonal Outgrowth

Enhancement

Technical Paper Publication. IMECE2018-86637

Shohei Tanaka, Ryota Sakiyama, Yusuke Morita, Koji

Yamamoto, Eiji Nakamachi,

Doshisha University, Kyoto,

Japan

2:35pm – Development of Stretch Stimulation Device for

Three-Dimensional Culture of PC12 Cells

Technical Paper Publication. IMECE2018-86643

Madoka Imura, Ryota Sakiyama, Yusuke Morita, Koji

Yamamoto, Eiji Nakamachi,

Doshisha University, Kyoto,

Japan

2:50pm – Design and Fabrication of Pneumatic Soft Gripper

Technical Paper Publication. IMECE2018-86648

Zhonghua Guo, Xiaoning Li, Zhongsheng Sun, Nanjing

University of Science and Technology, Nanjing, Jiangsu, China

3:05pm – Folding Artiﬁcial Mucosa With Cell-Laden

Hydrogels Guided by Mechanics Models

Technical Presentation. IMECE2018-89290

Honfei Chan,

Hongkong City University, Hongkong, China,

Ruike Zhao, Xuanhe Zhao,

Massachusetts Institute of

Technology, Cambridge, MA, United States

3:20pm – Biomaterial Models Adjustment and Comparison

for Ultra-High Molecular Weight Polyethylene in Finite

Element Models

Technical Paper Publication. IMECE2018-87719

Humberto Corro Hernandez,

Universidad de Guanajuato,

Guanajuato, Mexico,

Agustin Vidal-Lesso, Elias Ledesma,

Antonio de Jesus Balvantin Garcia,

University of Guanajuato,

Salamanca, Mexico

4-7 BIOMEDICAL DEVICES

4-7-3 Fluid and Microuid Biomedical Devices

Third Floor, David L. Lawrence Convention Center, Room 310

2:05pm–3:50pm

Session Chair: Chao Liang,

Praxair, Inc., Tonawanda, NY,

United States

Session Co-Chair: Margaret Nowicki,

U.S. Military Academy,

West Point, NY, United States

2:05pm – Design of Forward-Looking Intravascular

Ultrasonic Transducer for Microbubble-Mediated

Thrombolysis

Technical Presentation. IMECE2018-86464

Ho-Wuk Kim, Jinwook Kim, Huaiyu Wu, Xiaoning Jiang,

North Carolina State University, Raleigh, NC, United States

2:26pm – An Approach to Capture Humidity From Exhaled

Air

Technical Paper Publication. IMECE2018-86507

Sandra Grau Bartual, Ahmed M. Al-Jumaily,

Auckland

University of Technology, Auckland, New Zealand

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – THURSDAY, NOVEMBER 15

2:47pm – Canal Design for SLA Printing of Closed

Geometries

Technical Paper Publication. IMECE2018-87097

Erin Petrosky, Anne Schmitz,

Gannon University, Erie, PA,

United States

3:08pm – Development of a Hybrid Blood Pump for

Extracorporeal Blood Circulation Devices

Technical Presentation. IMECE2018-87291

Nahmkeon Hur, Sungwon Kang, Wonjung Kim,

Sogang

University, Seoul, Korea (Republic)

3:29pm – Continuous Cell Sorting by Dielectrophoresis in a

Straight Microﬂuidic Channel

Technical Paper Publication. IMECE2018-88156

Yuhao Qiang, Jia Liu, Darryl Dieujuste, Katrina Ramsamooj,

Sarah E. Du,

Florida Atlantic University, Boca Raton, FL,

United States

4-9 CLINICAL APPLICATIONS OF

BIOENGINEERING

4-9-1 Clinical Applications of Bioengineering I –

Experimental Methods

Third Floor, David L. Lawrence Convention Center, Room 311

2:05pm–3:50pm

Session Chair: Douglas E. Dow,

Wentworth Institute of

Technology, Boston, MA, United States

Session Co-Chair: Lara Thompson,

University of the District of

Columbia, Washington, DC, United States

2:05pm – Exploring Training Methodologies Towards the

Improvement of Elderly Balance

Technical Paper Publication. IMECE2018-86815

Lara Thompson, Joao Augusto Renno Brusamolin, Jelani

Guise, Mehdi Badache, Sandy Collado Estrada, Lonika

Behera, Marzieh Savadkoohi, Tyra Coombs, Pablo Sanchez

Guerrero, Devdas Shetty,

University of the District of

Columbia, Washington DC, United States

2:26pm – Investigation of Forces in Deep Hole Bone Drilling

Technical Paper Publication. IMECE2018-87064

JuEun Lee, Serena Chu, Craig L. Chavez,

University of the

Pacic, Stockton, CA, United States

2:47pm – A Clinical Experiment on Infant Applied Pressures

During Breastfeeding

Technical Paper Publication. IMECE2018-87674

Lin Jiang, Diana Alatalo,

University of Texas at Dallas,

Richardson, TX, United States,

Donna Geddes,

University of

Western Australia, Crawley, WA, Australia,

Fatemeh

Hassanipour,

University of Texas at Dallas, Richardson, TX,

United States

3:08pm – In Situ Tension of the Digital Nerves

Technical Presentation. IMECE2018-87835

Patrick J. Schimoler, Jacob Didesch, Peter Tang, Mark Carl

Miller,

Allegheny General Hospital, Pittsburgh, PA, United

States

3:29pm – Experimental Study of Bio-Polymer Knee Implant

Technical Paper Publication. IMECE2018-88479

Maria Ramos Gonzalez, Brendan O’Toole, Zhiyong Wang,

University of Nevada, Las Vegas, Las Vegas, NV, United States

4-2 DAMAGE BIOMECHANICS

4-2-1 Damage Biomechanics I: Blunt Impact Effects

and Analysis

Third Floor, David L. Lawrence Convention Center, Room 308

4:00pm–5:45pm

Session Chair: C.S. Florio, U

.S. Army ARDEC, Picatinny

Arsenal, NJ, United States

Session Co-Chair: Amit Bagchi,

U.S. Naval Research

Laboratory, Washington, DC, United States

4:00pm – Ranking of Biomechanical Metrics to Describe

Human Response to Impact-Induced Damage

Technical Paper Publication. IMECE2018-88007

Nicholas DeVogel, Anjishnu Banerjee, Frank Pintar,

Medical

College of Wisconsin, Milwaukee, WI, United States,

Narayan

Yoganandan,

Medical College of Wisconsin and VA Medical

Center, Milwaukee, WI, United States

4:15pm – Computational Human Torso Model Validation for

Frontal Blunt Trauma

Technical Paper Publication. IMECE2018-88382

Carolyn Hampton,

ORISE, Bel Air, MD, United States,

Michael Kleinberger,

ARL, Aberdeen Proving Ground, MD,

United States

4:30pm – Cerebrospinal Fluid and Spherically Convergent

Shear Waves During Blunt Head Trauma

Technical Presentation. IMECE2018-88389

Martin Ostoja-Starzewski, Amit Madhukar,

University of

Illinois at Urbana-Champaign, Urbana, IL, United States,

Ying Chen,

Simulia Corp., Katy, TX, United States

4:45pm – Computational Modeling of Blunt Impact to Head

and Correlation of Biomechanical Measures With Medical

Images

Technical Paper Publication. IMECE2018-88026

X. Gary Tan,

U.S. Naval Research Laboratory, Washington, DC,

United States,

Maria M. D’Souza, Subhash Khushu,

INMAS,

New Dehli, India,

Raj K. Gupta,

USMRMC, Fort Detrick, MD,

United States,

Virginia DeGiorgi,

U.S. Naval Research

Laboratory, Washington, DC, United States,

Ajay K. Singh,

INMAS, New Dehli, India,

Amit Bagchi,

U.S. Naval Research

Laboratory, Washington, DC, United States

5:00pm – Monitoring Tissue Damage Using Cloud-Based

Brain Biomechanics

Technical Presentation. IMECE2018-89984

Ritika Menghani, Reuben Kraft,

Pennsylvania State

University, University Park, PA, United States

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – THURSDAY, NOVEMBER 15

5:15pm – Pelvic Injury Survival Analysis for a Finite Element

Human Body Model Using Multiple Data Sets

Technical Paper Publication. IMECE2018-88447

Caitlin Weaver,

Wake Forest University, Winston Salem, NC,

United States,

Anna Miller,

Washington University, St. Louis,

MO, United States,

Joel Stitzel,

Wake Forest University,

Winston Salem, NC, United States

4-5 BIOMATERIALS AND TISSUE:

MODELLING, SYNTHESIS, FABRICATION

AND CHARACTERIZATION

4-5-4 Biomaterials and Tissue IV: Sythesis and

Characteriazation

Third Floor, David L. Lawrence Convention Center, Room 309

4:00pm–5:45pm

Session Chair: Anil Saigal,

Tufts University, Medford, MA,

United States

Session Co-Chair:

Seyed Allameh, Northern Kentucky

University, Newport, KY, United States

4:00pm – Reproduction of Kinematic Behavior of Elastic

Lamellae in the Thoracic Aortic Media

Technical Paper Publication. IMECE2018-87242

Atsutaka Tamura, Yuya Kato,

Tottori University, Tottori, Japan

4:21pm – Mechanical Properties of the Human Elbow

Bones Measured by Nanoindentation and Microindentation

Technical Paper Publication. IMECE2018-87406

Dilpreet Singh, Pulak Mohan Pandey, Dine

Kalyanasundaram,

Indian Institute of Technology Delhi, New

Delhi, India

4:42pm – Mechanical Property Determination of a

Stereolithographic Resin Subjected to Compressive

Technical Paper Publication. IMECE2018-87600

Christian Fry, Adam Mihalko, Robert Michael, Davide

Piovesan,

Gannon University, Erie, PA, United States

5:03pm – Correlation of Tumor Mechanical Rigidity to

Cancer Stage and Chemotherapeutic Response

Technical Presentation. IMECE2018-89317

Brian Bush,

National Institute of Standards and Technology,

Gaithersburg, MD, United States

5:24pm – Self-Folding Microgels to Form Artiﬁcial Capillary

Blood Vessels and a Mathematical Model to Decipher the

Dynamics of Self-Folding

Technical Presentation. IMECE2018-89784

Chunxiao Cui, Devon Eichfeld, Sean Liu, Mingkun Wang,

Li-Hsin Han,

Drexel University, Philadelphia, PA, United States

4-6 SYMPOSIUM ON MECHANOBIOLOGY

4-6-1 Mechanobiology

Third Floor, David L. Lawrence Convention Center, Room 317

4:00pm–5:45pm

Session Chair: Hai-Chao Han,

University of Texas at San

Antonio, San Antonio, TX, United States

Session Co-Chair: Zhangli Peng,

University of Notre Dame,

Notre Dame, IN, United States

4:00pm – Shear Stress Induced Calcium Dependent

Nuclear Deformation in Epithelial Cells

Technical Paper Publication. IMECE2018-87650

Deekshitha Jetta, Deepika Verma, Mohammad M. Maneshi,

Susan Z. Hua,

University at Buffalo, State University of New

York, Buffalo, NY, United States

4:21pm – Pneumatic Microﬂuidic Cell Compression Device

Technical Presentation. IMECE2018-89141

Donghee Lee, Alek G. Erickson,

University of Nebraska

Medical Center, Omaha, NE, United States,

Taesun You,

Texas Department of Transportation, Houston, TX, United

States,

Andrew T. Dudley,

University of Nebraska Medical

Center, Omaha, NE, United States,

Sangjin Ryu,

University

of Nebraska–Lincoln, Lincoln, NE, United States

4:42pm – A Multi-Physics Model for Mechanosensing in

Cell Migration

Technical Presentation. IMECE2018-89346

Bahador Marzban, Hongyan Yuan,

University of Rhode

Island, Kingston, RI, United States

5:03pm – A Model for Cellular Mechanotransduction and

Contractility at Finite Strain

Technical Presentation. IMECE2018-89389

Nikolaos Bouklas,

Cornell University, Ithaca, NY, United

States,

Selman Sakar, William Curtin,

EPFL, Lausanne,

Switzerland

5:24pm – A Coupled Reaction-Diffusion-Strain Model of

Mesenchymal Stem Cell Differentiation Into Osteoblasts

Technical Presentation. IMECE2018-89761

Matthew Dolack,

Pennsylvania State University, State College,

PA, United States

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – THURSDAY, NOVEMBER 15

4-7 BIOMEDICAL DEVICES

4-7-4 Rehabilitation and Treatment Devices

Third Floor, David L. Lawrence Convention Center, Room 310

4:00pm–5:45pm

Session Chair: Liandong Yu,

Hefei University of Technology,

Hefei, China

Session Co-Chair: Shan Hu,

Iowa State University, Ames, IA,

United States

4:00pm – Minimizing Pain in Below Knee Amputees’—

Patients Wearing Prosthetic Socket by Increasing Flexibility

in Speciﬁc Relief Areas

Technical Paper Publication. IMECE2018-86450

Gabi Nehme, Micheline Dib Nehme, Yousef Khalife, Antoun

Chagoury,

University of Balamand, El-Koura, Lebanon North,

Lebanon

4:21pm – Development of a Passive Prosthetic Ankle With

Slope Adapting Capabilities

Technical Paper Publication. IMECE2018-86593

Sandesh G. Bhat, Sangram Redkar,

Arizona State University,

Mesa, AZ, United States,

Thomas Sugar,

Arizona State

University, Chandler, AZ, United States

4:42pm – Design of a Smart Glove Using Flexible

Technology for Artiﬁcial Gripper

Technical Paper Publication. IMECE2018-86620

Vidya Nandikolla, Robin Bochen, Tristin Suhr,

California

State University Northridge, Northridge, CA, United States

5:03pm – Design and Prototype Development of a

Reconﬁgurable Wheelchair With Stand-Sit-Sleep

Conﬁgurations

Technical Paper Publication. IMECE2018-87905

Sumit Desai, Shankar Mantha, Vikas Phalle, Sa

ngram Patil,

Vishwadeep Handikherkar,

Veermata Jijabai Technological

Institute, Mumbai, Maharashtra, India

5:24pm – Neural Network Modeling of Maximum Insertion

Force of Bevel-Tip Surgical Needle

Technical Paper Publication. IMECE2018-88383

Sai Teja Reddy Gidde, Tololupe Verissimo, Nuo Chen,

Temple University, Philadelphia, PA, United States,

Byoung-

gook Loh,

Hansung University, Seoul, Korea (Republic),

Parsaoran Hutapea,

Temple University, Philadelphia, PA,

United States

4-9 CLINICAL APPLICATIONS OF

BIOENGINEERING

4-9-2 Clinical Applications of Bioengineering II

Third Floor, David L. Lawrence Convention Center, Room 311

4:00pm–5:45pm

Session Chair: Kalyani Nair,

Bradley University, Peoria, IL,

United States

Session Co-Chair: Li-Hsin Han,

Drexel University,

Philadlephia, PA, United States

4:00pm – Coupling Immunoﬂuorescence and

Optoelectrokinetic Technique for Escherichia Coli

Detection and Quantiﬁcation in Water

Technical Paper Publication. IMECE2018-86749

Uzumma O. Ozeh,

Purdue University Northwest, Hammond,

IN, United States,

A.G. Agwu Nnanna,

University of Texas of

the Permian Basin, Odessa, TX, United States,

Justus C.

Ndukaife,

Vanderbilt University, Nashville, TN, United States

4:21pm – Viscoelastic Properties of the L3-L4 Myofascial

Tissue in Ankylosing Spondylitis Patients

Technical Paper Publication. IMECE2018-87906

Allison White, Hannah Abbott,

Bradley University, Peoria, IL,

United States,

Alfonse Masi,

University of Illinois College of

Medicine, Peoria, IL, United States,

Kalyani Nair,

Bradley

Univeristy, Peoria, IL, United States

4:42pm – Three-Dimensional Cephalometric Analysis Using

Computed Tomographic Imaging

Technical Paper Publication. IMECE2018-88259

Prahlad Menon, Soroosh Sanatkhani,

University of

Pittsburgh, Pittsburgh, PA, United States

5:03pm – Deposition Control of a FDM 3D Printer Based

Direct Writing System for Hydrogel Molding in Microﬂuidic

Devices Fabrication

Technical Paper Publication. IMECE2018-88267

Karen Chang Yan,

The College of New Jersey, Ewing

Township, NJ, United States,

Jacob Boyle,

The College of

New Jersey, Hillsdale, NJ, United States,

Kristi Petersen,

The

College of New Jersey, Ewing, NJ, United States

5:24pm – A New Wideband Microwave Antenna for Breast

Cancer Detection

Technical Paper Publication. IMECE2018-87390

Lulu Wang, Jinzhang Xu,

Hefei University of Technology,

Hefei, China

TRACK 4 BIOMEDICAL & BIOTECHNOLOGY ENGINEERING – THURSDAY, NOVEMBER 15

NOTES

5-1-1: Product and Process Design I

5-1-2: Product and Process Design II

5-1-3: Product and Process Design III

5-1-4: Product and Process Design IV

5-2-1: Social Context Aware Design

5-4-1: CAD, CAM and CAE Design I

5-4-2: CAD, CAM and CAE Design II

5-5-1: Product Optimization I

5-5-2: Product Optimization II

5-8-1: Reliability and Risk in Energy Systems

5-10-1: Topics on Safety and Hazard Analysis

5-10-2: Topics on Risk and Hazard A

nalysis

5-11-1: Failure and Forensic Analysis

5-12-1: Reliability Methods

5-13-1: Safety, Risk and Reliability of Emerging Technologies

5-14-1: Testing for Product Reliability and Safety

5-16-1: Safety in Transportation, Agriculture, and Off-Road Vehicles

5-16-2: Safety in Transportation, Agriculture, and Off-Road V

ehicles

5-17-1: Structural Systems Crashworthiness

5-17-2: Full Vehicle Crashworthiness and Occupants Protection

5-18-2: General

5-19-1: Design, Reliability, Safety, and Risk Plenary

Track Organizers

Dumitru Caruntu,

University of Texas

Rio Grande Valley, United States

Bogdan Epureanu,

University of

Michigan, United States

Marco Amabili,

McGill University,

Canada

Topic Organizers

Shuichi Fukuda,

Keio University, Japan

Masato Inoue, Meiji University, Japan

Caterina Rizzi,

University of Bergamo,

Italy

Daniele Regazzoni,

University of

Bergamo, Italy

Marco Rossoni,

Politecnico di Milano,

Italy

Miri Weiss Cohen,

Braude College of

Engineering, Israel

Antonio Caputi,

Università degli Studi di

Bergamo, Italy

Guangdong Zhu,

NREL, United States

Zhiwen Ma,

NREL, United States

Mihai Diaconeasa,

UCLA, CA, United

States

Alba So, University

“Mediterranea” of

Reggio Calabria, Italy

Xiaobin Le,

Wentworth Institute of

Technology, United States

Arun Veeramany,

Pacic Northwest

National Laboratory, United States

Bin Zhou,

FM Global, United States

Chimba Mkandawire,

Exponent Inc.,

United States

Mohammad Pourgol-Mohammad,

JCI/

Sahand University of Technology,

United States

Enrique Droguett,

University of Chile,

Chile

Dengji Zhou,

Shanghai Jiao Tong

University,

China

Jeremy Gernand,

Pennsylvania State

University, United States

John Wiechel,

SEA, Limited, United

States

Thomas Maull,

SEA, Limited, United

States

Mohamed Ridha Baccouche,

Ford,

United States

Saeed Barbat,

Ford Motor Company,

United States

Session Organizers

Daniele Regazzoni,

University of

Bergamo, Italy

Pooya Mahmoudian,

Haskel

International, United States

Shuichi Fukuda,

Keio University, Japan

Sina Mohsenian,

University of

Massachusetts Lowell, United States

Anthony D Angelo,

US Army ARDEC,

United States

Olga Sankowski,

Hamburg University of

Technology, Germany

Giorgio Colombo,

Politecnico Di Milano,

Italy

Marco Rossoni,

Politecnico di Milano,

Italy

Ragavanantham Shanmugam,

Anna

University, India

Yucheng Liu,

Mississippi State

University, United States

Jorge D. Camba,

Purdue University,

United States

Antonio Caputi,

Università degli Studi di

Bergamo, Italy

C.S. Florio,

US Army ARDEC, United

States

Miri Weiss Cohen,

Braude College of

Engineering, Israel

Victorita Radulescu,

University

Politechnica of Bucharest, Romania

Guangdong Zhu,

NREL, United States

Bin Zhou,

FM Global, United States

Arun Veeramany,

Pacic Northwest

National Laboratory, United States

John Wiechel,

SEA, Limited, United

States

Javad Sattarvand,

University of Nevada,

United States

Xiaobin Le,

Wentworth Institute of

Technology, United States

Rudolf Reichert,

George Mason

University, United States

TRACK 5 DESIGN, RELIABILITY, SAFETY, AND

RISK

MONDAY, NOVEMBER 12

5-1 PRODUCT AND PROCESS DESIGN

5-1-1 Product and Process Design I

Third Floor, David L. Lawrence Convention Center, Room 303

9:45am–11:30am

Session Chair: Daniele Regazzoni,

University of Bergamo,

Dalmine (BG), Italy

Session Co-Chair: Pooya Mahmoudian,

Haskel International,

Burbank, CA, United States

9:45am – Method of Construction for High Cycle Fatigue

Resistant Pressure Vessels in Hydrogen Service

Technical Paper Publication. IMECE2018-86292

Pooya Mahmoudian,

Haskel International, Burbank, CA,

United States

10:06am – An Empirically Determined Design Guideline for

Rectangular Cross Section Nitinol Flexure Hinges With the

Focus on Flexibility-Strength Trade-Off

Technical Paper Publication. IMECE2018-86551

Suat Coemert, Mar Olmeda, Julia Fuckner, Christoph

Rehekampff, Sandra Vanessa Brec

ht, Tim Christian Lueth,

Technical University of Munich, Garching bei Muenchen,

Bavaria, Germany

10:27am – Comparing Contact Stress Estimates of Some

Straight Bevel Gears With ISO 10300 Standards

Technical Paper Publication. IMECE2018-86572

Edward Osakue,

Texas Southern University, Houston, TX,

United States,

Lucky Anetor,

Nigerian Defence Academy,

Nigeria, Kaduna, Nigeria

10:48am – A Method for Constructing Standard Involute

Gear Tooth Proﬁle

Technical Paper Publication. IMECE2018-86573

Edward Osakue,

Texas Southern University, Houston, TX,

United States,

Lucky Anetor,

Nigerian Defence Academy,

Nigeria, Kaduna, Nigeria

11:09am – Introducing ISO to AGMA Conversion Factors for

Steel Spiral Bevel Gears Design Under Bending Fatigue

Technical Presentation. IMECE2018-89231

Mehmet Onur Ogulata,

Karamanoglu Mehmetbey University,

Karaman, Turkey,

Necdet Geren,

University of Cukurova,

Adana, Turkey

5-5 PRODUCT OPTIMIZATION

5-5-1 Product Optimization I

Third Floor, David L. Lawrence Convention Center, Room 304

9:45am–11:30am

Session Chair: Miri Weiss Cohen,

Braude College of

Engineering, Karmiel, Israel

Session Co-Chair: C.S. Florio,

U.S. Army ARDEC, Picatinny

Arsenal, NJ, United States

9:45am – Structural Optimization of Truck Front-Frame

Under Multiple Load Cases

Technical Paper Publication. IMECE2018-86293

Shuvodeep De, Karanpreet Singh, Berkan Alanbay, Rakesh

Kapania,

Virginia Tech, Blacksburg, VA, United States,

Raymond Aguero,

Metalsa, Roanoke, VA, United States

10:06am – Truss Design and Optimization Using Stress

Analysis and NURBS Curves

Technical Paper Publication. IMECE2018-87728

Antonio Caputi,

Università degli Studi di Bergamo, Dalmine

(BG), Italy,

Miri Weiss Cohen,

Braude College of Engineering,

Karmiel, Israel,

Davide Russo,

University of Bergamo,

Dalmine, Italy,

Caterina Rizzi,

University of Bergamo, Rho (MI),

Italy

10:27am – Optimization Methods for Controlling Stresses at

Contacting Surfaces of Interference Fit Assemblies Under

Axial and Torsional Loads

Technical Paper Publication. IMECE2018-88180

C.S. Florio,

U.S. Army ARDEC, Picatinny Arsenal, NJ, United

States

10:48am – A Novel Optimization Design Method of Additive

Manufacturing Oriented Porous Structures

Technical Paper Publication. IMECE2018-86952

Jiaqi Zhao, Ming Zhang, Yu Zhu, Xin Li, Leijie Wang,

Tsinghua University, Beijing, China

11:09am – Static Stress and Thermal Analysis of

Connecting Rod Using FE-Analysis

Technical Presentation. IMECE2018-88846

Lalit Kumar Choudhary,

Delhi Technological University, Delhi,

Delhi, India

5-11 FAILURE AND FORENSIC ANALYSIS

5-11-1 Failure and Forensic Analysis

Third Floor, David L. Lawrence Convention Center, Room 305

9:45am–11:30am

Session Chair: John Wiechel,

SEA, Limited, Columbus, OH,

United States

9:45am – Early Fault Warning of Spindle Based on the

Adaptive Weighted Fuzzy Petri Net

Technical Paper Publication. IMECE2018-86042

Hai Li, Wei Wang, Qingzhao Li, Lei Fan, Pu Huang,

University Electrionic Science T

China

TRACK  DESIGN, RELIABILITY, SAFETY, AND RISK

–

MONDAY, NOVEMBER 

10:06am – Test Results: Vehicle Responses to Simulated

Drag Caused by Front Tire Tread Detachment; The Effect of

Scrub Radius and Speed

Technical Paper Publication. IMECE2018-87609

Mark W. Arndt,

Transportation Safety, Technologies, Inc.,

Phoenix, AZ, United States,

Stephen Arndt,

Safety

Engineering and Forensic Analysis, Phoenix, AZ, United States

10:27am – Life Prediction of L6 Steel Using Strain-Life

Curve and Strain Softening Phenomenon by Means of Low

Cycle Fatigue Testing

Technical Presentation. IMECE2018-88867

Sanket Inamdar,

Bharat Forge Ltd., Pune, Maharashtra, India

10:48am – Microstructure Characterization and Evaluation

of Mechanical Properties for Friction Welded En-24 Alloy

Steel

Technical Presentation. IMECE2018-89043

Vijay Gaikwad,

Bharat Forge Ltd., KCTI, Pune, Mharashtra,

India

5-14 TESTING FOR PRODUCT RELIABILITY

AND SAFETY

5-14-1 Testing for Product Reliability and Safety

Fourth Floor, David L. Lawrence Convention Center, Room 406

9:45am–11:30am

Session Chair: John Wiechel,

SEA, Limited, Columbus, OH,

United States

9:45am – Sawing Status Prediction of Diamond Sawblade

Sawing Concrete Based on the Characteristics of Material

Composition

Technical Paper Publication. IMECE2018-86340

Shanshan Hu, Fan Yang, Zili Yang, Feixiang Xiong, Weiwei

Shi, Hongqun Tang,

Guangxi University, Nanning, Guangxi,

China

10:06am – Testing for AM Products With Recycled

Filaments

Technical Presentation. IMECE2018-87112

Serdar Tumkor, Jonathan Holman,

University of Pittsburgh,

Johnstown, PA, United States

10:27am – Product Design in a Global Economy

Technical Paper Publication. IMECE2018-87685

Dennis Guenther,

SEA Limited, Columbus, OH, United States,

Michael Arnett, Manuel Forero Rueda,

SEA Limited, Elk

Grove Village, IL, United States

10:48am – Statistical Time Domain Feature Based

Approach to Assess the Performance Degradation of

Rotary Seals

Technical Paper Publication. IMECE2018-87857

Madhumitha Ramachandran, Zahed Siddique,

University of

Oklahoma, Norman, OK, United States

11:09am – Considerations for Communications Systems in

Underground Refuge Alternatives

Technical Paper Publication. IMECE2018-87952

Nicholas Damiano, Chenming Zhou, Bruce Whisner,

National Institute for Occupational Safety and Health,

Pittsburgh, PA, United States

5-17 CRASHWORTHINESS, OCCUPANT

PROTECTION, AND BIOMECHANICS

5-17-1 Structural Systems Crashworthiness

Fourth Floor, David L. Lawrence Convention Center, Room 405

9:45am–11:30am

Session Chair: Rudolf Reichert,

George Mason University,

Fairfax, VA, United States

Session Co-Chair: Mohamed Ridha Baccouche,

Ford, Ann

Arbor, MI, United States

9:45am – Experimental and Numerical Studies on Dynamic

Mechanical Properties of Metal-Polymer Hybrid Materials

Technical Paper Publication. IMECE2018-86521

Yiben Zhang, Lingyu Sun, Lijun Li,

Beihang University,

Beijing, China,

Taikun Wang, Yantao Wang,

Henan Key

Laboratory of Underwater Intelligent Equipment, Zhengzhou

Electromechanical Engineering Re, Zhengzhou, China

10:06am – Side Structure Integrity Research for Passenger

Rail Equipment

Technical Paper Publication. IMECE2018-87700

Shaun Eshraghi, Michael Carolan, A. Be

njamin Perlman,

Volpe National Transportation Systems Center, Cambridge,

MA, United States

10:27am – Finite Element Analysis of the Passenger Rail

Equipment Workstation Table Sled Test

Technical Paper Publication. IMECE2018-87751

Shaun Eshraghi, Kristine Severson,

Volpe National

Transportation Systems Center, Cambridge, MA, United States,

David Hynd,

Transport Research Laboratory, Wokingham,

Berkshire, United Kingdom,

A. Benjamin Perlman,

Volpe

National Transportation Systems Center, Cambridge, MA,

United States

10:48am – Dynamic Energy Absorption Characteristics of

Additively-Manufactured Macrolattice Materials

Technical Paper Publication. IMECE2018-88521

Keivan Davami, Mehrdad Mohsenizadeh, Michael Munther,

Tyler Palma,

Lamar University, Beaumont, TX, United States

11:09am – Numerical Study on Explosion Cutting Process

of PMMA Plate and Key Factors Inﬂuence on Cutting

Performance

Technical Paper Publication. IMECE2018-86793

Lei Ge,

Beihang University, Beijing, China,

Yantao Wang,

Huipeng Hu,

Henan Key Laboratory of Underwater Intelligent

Equipment, Zhengzhou Electromechanical Engineering Re,

Zhengzhou, China,

Lijun Li, Yiben Zhang,

Beihang University

Beijing, China

TRACK  DESIGN, RELIABILITY, SAFETY, AND RISK

–

MONDAY, NOVEMBER 

5-1 PRODUCT AND PROCESS DESIGN

5-1-2 Product and Process Design II

Third Floor, David L. Lawrence Convention Center, Room 303

1:45pm–3:30pm

Session Chair: Shuichi Fukuda,

Keio University, Minato-ku,

Tokyo, Japan

Session Co-Chair: Sina Mohsenian,

University of

Massachusetts Lowell, Lowell, MA, United States

1:45pm – The Automatic Basketball Rebound System

Technical Paper Publication. IMECE2018-86715

Thomas Smith, Vidya Nandikolla,

California State University

Northridge, Northridge, CA, United States

2:06pm – Journal Bearing With Controllable Radial

Clearance

Technical Paper Publication. IMECE2018-86748

Shahrbanoo Farkhondeh Biabnavi,

Cleveland State

University, Beachwood, OH, United States,

Majid Rashidi,

Cleveland State University, Pepper Pike, OH, United States

2:27pm – Cross Sectional Area Changes Due to Plastic

Bending of Prismatic Bars

Technical Paper Publication. IMECE2018-87608

Michael Zielinski,

Rotor Clip Co Inc., Somerset, NJ, United

States,

Ismail Soner Cinoglu,

Lehigh University, Bethlehem,

PA, United States

2:48pm – Numerical Analysis of the Contribution of Shot

Peening in the Fatigue Strength of Multipass Welded Joints

Technical Paper Publication. IMECE2018-87720

Unai Etxeberria, Jon Ander Esnaola, Ibai Ulacia,

Mondragon

Universitatea - Mondragon Goi Eskola Politeknikoa J.M.A.S.

Coop., Mondragon, Spain,

Done Ugarte, Iñigo Llavori, Miren

Larrañaga,

Mondragon Unibertsitatea, Mondragon, Spain,

Arkaitz Lopez-Jauregi,

Escuela Politécnica Superior,

Mondragon Unibertsitatea, Mondragon, Spain

3:09pm – Reactive Nitrogen Plasma Spray Coating of

Titanium Nitride: Plasma Torch Design and Coating

Analysis

Technical Presentation. IMECE2018-88813

Sina Mohsenian,

University of Massachusetts Lowell, Lowell,

MA, United States

5-5 PRODUCT OPTIMIZATION

5-5-2 Product Optimization II

Third Floor, David L. Lawrence Convention Center, Room 304

1:45pm–3:30pm

Session Chair: Antonio Caputi,

Università degli Studi di

Bergamo, Dalmine (BG), Italy

Session Co-Chair: Victorita Radulescu,

University Politechnica

of Bucharest, Bucharest, Romania

1:45pm – Optimal Reaction Wrench Measuring Platform

Technical Paper Publication. IMECE2018-87057

Rajesh Kumar, Aditya Jain, Jitendra Prasad Khatait,

Indian

Institute of Technology Delhi, New Delhi, India

2:06pm – Systematic Study of the Effect of Non-Uniform

Seal Stiffness on the Contact Stress in Flat-Faced Soft-

Seated Spring Operated Pressure Relief Valves

Technical Paper Publication. IMECE2018-87926

Alex Schimanowski, Arthur Seibel, Josef Schlattmann,

Hamburg University of Technology, Hamburg, Germany

2:27pm – Automotive Headlamp Design Optimization and

Photometry Performance Improvement

Technical Presentation. IMECE2018-89120

Girish Kerur, Sac

hin M. Jadhao,

Savitribai Phule Pune

University, Pune, Maharashtra, India

2:48pm – Numerical Modeling of the Intelligent Heating

Systems for Living Space

Technical Presentation. IMECE2018-89189

Victorita Radulescu,

University Politechnica of Bucharest,

Bucharest, Romania

3:09pm – Advanced Modeling and Experimental Validation

of an Optimized Power Transformer Tank

Technical Paper Publication. IMECE2018-87769

Hélder Fernando Gonçalves Mendes, Cristiano José

Pereira Coutinho, Sérgio Manuel Oliveira Tavares, Luís

Miguel Ribeiro Félix, Agostinho Emanuel Nunes Martins de

Matos, Efacec Energia,

Máquinas e Equipamentos Eléctricos,

S.A., Porto, Porto, Portugal,

José Filipe Bizarro Meireles,

António Costa Marques Pinho, Joel Ricardo da Silva

Teixeira,

University of Minho, Guimarães, Portugal

TRACK  DESIGN, RELIABILITY, SAFETY, AND RISK

–

MONDAY, NOVEMBER 

5-12 RELIABILITY METHODS

5-12-1 Reliability Methods

Third Floor, David L. Lawrence Convention Center, Room 305

1:45pm–3:30pm

Session Chair: Mohammad Pourgol-Mohammad,

JCI/Sahand

University of Technology, York, PA, United States

Session Co-Chair: Xiaobin Le,

Wentworth Institute of

Technology, Boston, MA, United States

1:45pm – Applications of the Monte Carlo Method for

Estimating the Reliability of Components Under Multiple

Cyclic Fatigue Loadings

Technical Paper Publication. IMECE2018-86130

Xiaobin Le,

Wentworth Institute of Technology, Boston, MA,

United States

2:06pm – System Wear Life Estimation Under Uncertainty

Technical Paper Publication. IMECE2018-87015

Mohammad Pourmostafaei,

Sahand University of Technology,

Tabriz, East Azarbaijan, Iran,

Mohammad Pourgol-

Mohammad,

JCI/Sahand University of Technology, York, PA,

United States,

Mojtaba Yazdani, Hossein Salimi,

Sahand

University of Technology, Tabriz, East Azarbaijan, Iran

2:27pm – A Whole Operation Life Cycle Model of Gas

Turbine Blades Under Multi-Physics Based on Variation of

Blade Proﬁle Parameters

Technical Paper Publication. IMECE2018-87040

Dengji Zhou, Tingting Wei, Ma Shixi, Huisheng Zhang,

Zhenhua Lu, Shilie Weng,

Shanghai Jiao Tong University,

Shanghai, China

2:48pm – Reliability-Based Optimal Design of a Micro-Grid

System Under Natural Disasters

Technical Paper Publication. IMECE2018-88139

Zhetao Chen,

Rutgers, The State University of New Jersey,

Piscataway, NJ, United States,

Zhimin Xi,

Rutgers University -

New Brunswick, Piscataway, NJ, United States

3:09pm – An Investigation for Operational Reliability

Assessment of Rolling Bearings Using Ensemble Stacked

Deep Auto-encoders

Technical Presentation. IMECE2018-89518

Qibin Wang, Xianguang Kong, Hongbo Ma, Lei Yin, Jiantao

Chang, Yao Liu,

Xidian University, Xi’an, China

5-16 SAFETY IN TRANSPORTATION,

AGRICULTURE, AND OFF-ROAD VEHICLES

5-16-1 Safety in Transportation, Agriculture, and Off-

Road Vehicles

Fourth Floor, David L. Lawrence Convention Center, Room 406

1:45pm–3:30pm

Session Chair: John Wiechel,

SEA, Limited, Columbus, OH,

United States

1:45pm – Road Guard: Innovative Use of Plastic Waste

Material in Redesigning Road Curbs

Technical Paper Publication. IMECE2018-86021

Ebenezer Ahiati,

Kwame Nkrumah University of Science and

Technology, Kumasi, Ghana

2:06pm – Low-Cost Wi-Fi Navigation of Smart Wheelchairs

Technical Paper Publication. IMECE2018-86277

Wafa Batayneh, Khaled Hatamleh,

Jordan University of

Science & Technology, Irbid, Jordan,

Amjad Nusayr,

University

of Houston–Victoria, Victoria, TX, United States,

Rama

AlQuraan, Aseel Al-Khaleel, Ahmad Bataineh,

Jordan

University of Science & Technology, Irbid, Jordan

2:27pm – Variable Braking Force Using Intelligent Twin

Calipers

Technical Paper Publication. IMECE2018-86594

Ganesh Vinayaga Sundaram,

Sri Venkateswara College of

Engineering, Chennai, India,

Chidambaram Subramanian,

Centre for Tire Research, Blacksburg, VA, United States

2:48pm – Optimal Design of a Conventional and

Magnetorheological Fluid Brakes Using Sensitivity Analysis

and Taguchi Method

Technical Paper Publication. IMECE2018-86775

Salwan Obaid Waheed Khafaji, Noah Manring, Mohammed

Al-Mudhafar,

University of Missouri - Columbia, Columbia,

MO, United States

5-17 CRASHWORTHINESS, OCCUPANT

PROTECTION, AND BIOMECHANICS

5-17-2 Full Vehicle Crashworthiness and Occupants

Protection

Fourth Floor, David L. Lawrence Convention Center, Room 405

1:45pm–3:30pm

Session Chair: Lingyu Sun,

Beihang University, Beijing, China

Session Co-Chair: Mohamed Ridha Baccouche,

Ford, Ann

Arbor, MI, United States

1:45pm – Development of Structural Countermeasures for

NHTSA’s Oblique Impact

Technical Paper Publication. IMECE2018-86684

Rudolf Reichert, Cing-Dao (Steve) Kan,

George Mason

University, Fairfax, VA, United States

TRACK  DESIGN, RELIABILITY, SAFETY, AND RISK

–

MONDAY, NOVEMBER 

2:06pm – A New Crashworthiness Design Method for

Complex Vehicular Structures Using Principal Components

Analysis (PCA) and Data Mining

Technical Presentation. IMECE2018-87703

Xianping Du, Feng Zhu,

Embry-Riddle Aeronautical University,

Daytona Beach, FL, United States

2:27pm – Finite Element Model Validation of the Hybrid-III

Rail Safety (H3-RS) Anthropomorphic Test Device (ATD)

Technical Paper Publication. IMECE2018-87736

Shaun Eshraghi, Kristine Severson,

Volpe National

Transportation Systems Center, Cambridge, MA, United States,

David Hynd,

Transport Research Laboratory, Wokingham,

Berkshire, United Kingdom,

A. Benjamin Perlman,

Volpe

National Transportation Systems Center, Cambridge, MA,

United States

2:48pm – Pedestrian Collision Responses Using Legform

Impactor Subsystem and Full-Sized Pedestrian Model on

Different Workbenches

Technical Paper Publication. IMECE2018-87904

Obaidur Rahman Mohammed, Hamid Lankarani, Shabbir

Memon,

Wichita State University, Wichita, KS, United States

3:09pm – A Peak-Selection RBF Mesh Morphing Method for

Subject-Speciﬁc Child Occupant Modeling

Technical Paper Publication. IMECE2018-88398

Yunlei Yin, Wenxiang Dong,

Chongqing University,

Chongqing, China,

Zhenfei Zhan,

Chongqing University,

Livonia, MI, United States,

JunMing Li,

Chongqing University,

Chongqing, China

5-1 PRODUCT AND PROCESS DESIGN

5-1-3 Product and Process Design III

Third Floor, David L. Lawrence Convention Center, Room 303

3:45pm–5:30pm

Session Chair: Anthony D Angelo,

U.S. Army ARDEC,

Hillsborough, NJ, United States

Session Co-Chair: Olga Sankowski,

Hamburg University of

Technology, Hamburg, Hamburg, Germany

3:45pm – Effective Design Team Composition Using

Individual and Group Cognitive Attributes

Technical Paper Publication. IMECE2018-86888

Kaitlyn Fritz, Line Deschenes, Vijitashwa Pandey,

Oakland

University, Rochester, MI, United States

4:06pm – Application of Moving Particle Simulation Method

to Transmission Design Process

Technical Presentation. IMECE2018-87310

Chulmin Ahn,

Hyundai Motor Group, Hwaseong-si, Gyeonggi-

do, Korea (Republic)

4:27pm – Using Multi-Channel Human-System Interaction

for User-Centered Product Design

Technical Paper Publication. IMECE2018-88091

Olga Sankowski, Dieter Krause,

Hamburg University of

Technology, Hamburg, Hamburg, Germany

4:48pm – Hand Design Selection for Precision Grasping of

Small Objects Based on Hand-object System Workspace

Technical Presentation. IMECE2018-89640

Roshan Kumar Hota,

Indian Institute of Technology,

Kharagpur, Kharagpur, West Bengal, India,

Kumar Cheruvu,

Indian Institute of Technology Kharagpur, Kharagpur, India

5:09pm – A Systems Engineering Approach to

Incorporating the Internet of Things to Reliability-Risk

Modeling for Ranking Conceptual Designs

Technical Paper Publication. IMECE2018-86711

Anthony D. Angelo,

U.S. Army ARDEC, Hillsborough, NJ,

United States,

Edwin K.P. Chong,

Colorado State University,

Ft. Collins, CO, United States

5-8 RELIABILITY AND RISK IN ENERGY

SYSTEMS

5-8-1 Reliability and Risk in Energy Systems

Third Floor, David L. Lawrence Convention Center, Room 304

3:45pm–5:30pm

Session Chair: Guangdong Zhu,

NREL, Englewood, CO,

United States

3:45pm – A Novel Hybrid Strategy for Multimode Operation

Mapping and Feature Extraction on Data-Driven Statistical

Fault Detection Methods

Technical Paper Publication. IMECE2018-87417

Horacio Pinzon, Cinthia Audivet, Melitsa Torres, Marlon

Consuegra, Javier Alexander, Marco Sanjuan,

Promigas,

Barranquilla, Colombia

4:06pm – Seismic Probabilistic Risk Assessment of Nuclear

Power Plants: 10 CFR 50.69 Assumptions and Sources of

Uncertainty

Technical Paper Publication. IMECE2018-87677

Sara Lyons,

U.S. Nuclear Regulatory Commission,

Kensington, MD, United States,

Shilp Vasavada,

U.S. Nuclear

Regulatory Commission, Washington, DC, United States

4:27pm – Life Assessment of Gas Turbine Blades Under

Creep Failure Mechanism Considering Humidity

Technical Paper Publication. IMECE2018-87883

Bita Soltanmohammadlou,

Sahand University of Technology,

Tabriz, East Azarbaijan, Iran,

Mohammad Pourgol-

Mohammad,

JCI/Sahand University of Technology, York, PA,

United States,

Mojtaba Yazdani,

Sahand University of

Technology, Tabriz, East Azarbaijan, Iran

4:48pm – Accelerated Degradation Testing of Rigid Wet

Cooling Media to Analyse the Impact of Calcium Scaling

Technical Paper Publication. IMECE2018-88508

Hemanth Narayan Dakshinamurthy, Ashwin Siddarth,

University of Texas at Arlington, Arlington, TX, United States,

Abhishek Guhe,

Mestex, A Division of Mestek Inc., Dallas, TX,

United States,

Rajesh Kasukurthy,

University of Texas at

Arlington, Arlington, TX, United States,

James Hoverson,

Mestex, A Division of Mestek Inc., Dallas, TX, United States,

Dereje Agonafer,

University of T

TX, United States

TRACK  DESIGN, RELIABILITY, SAFETY, AND RISK

–

MONDAY, NOVEMBER 

5:09pm – Adhesion Durability in Photovoltaic Backsheets

as a Function of Indoor Accelerated Weathering Exposure

Technical Presentation. IMECE2018-89704

Scott Julien, Jianfeng Sun,

Northeastern University, Boston,

MA, United States,

Yu Wang,

Case Western Reserve

University, Cleveland, OH, United States,

Andrew Fairbrother,

Xiaohong Gu,

National Institute of Standards and Technology,

Gaithersburg, MD, United States,

Sophie Napoli,

Arkema, Inc.,

King of Prussia, PA, United States,

Liang Ji, Kenneth P.

Boyce,

Underwriters Laboratories, LLC, Northbrook, IL, United

States,

Michael Kempe,

National Renewable Energy

Laboratory, Golden, CO, United States,

Roger H. French,

Laura S. Bruckman,

Case Western Reserve University,

Cleveland, OH, United States,

Gregory S. O’Brien, Adam W.

Hauser,

Arkema, Inc., King of Prussia, PA, United States,

Kai

Tak Wan,

Northeastern University, Boston, MA, United States

5-13 SAFETY, RISK AND RELIABILITY OF

EMERGING TECHNOLOGIES

5-13-1 Safety, Risk and Reliability of Emerging

Technologies

Third Floor, David L. Lawrence Convention Center, Room 305

3:45pm–5:30pm

Session Chair: Mohammad Pourgol-Mohammad,

JCI/Sahand

University of Technology, York, PA, United States

Session Co-Chair: Jeremy M. Gernand,

Pennsylvania State

University, University Park, PA, United States

3:45pm – Examining Pulmonary Toxicity of Engineered

Nanoparticles Using Clustering for Safe Exposure Limits

Technical Paper Publication. IMECE2018-87431

Vignesh Ramchandran,

Pennsylvania State University,

University Park, PA, United States,

Jeremy Gernand,

Pennsylvania State University, Port Matilda, PA, United States

4:06pm – Limit Load Analysis of As-Fabricated Pipe Bends

With Low Ovality Under In-Plane Closing Moment Loading

and Internal Pressure

Technical Paper Publication. IMECE2018-88004

Sherif Sorour, Mostafa Shazly,

The British University in Egypt,

El Sherouk City, Egypt,

Mohammad Megahed,

Cairo

University, Giza, Cairo, Egypt

4:27pm – Real-Time Fault Diagnosis of Rotating Machinery

Based on Improved 1-D Convolutional Neural Network

Under Noisy Environment

Technical Presentation. IMECE2018-88878

Liu Xingchen, Qi Caizhou, Zhao Jiong, Shen Hehong, Xiong

Xiaolei,

Tongji University, Shanghai, Shanghai, China

4:48pm – Flammability Risk Assessment of Mildly

Flammable Refrigerant Leak From Roof Top Unit

Technical Presentation. IMECE2018-89011

Ahmed Elatar, Ahmad Abu-Heiba, Mingkan Zhang,

Oak

Ridge National Laboratory, Oak Ridge, TN, United States,

Kevin Dean Edwards,

Oak Ridge National Laboratory,

Knoxville, TN, United States,

Viral Patel, Van Baxter,

Oak

Ridge National Laboratory, Oak Ridge, TN, United States,

Omar Abdelaziz,

Cleat Consulting, Dubai, United Arab Emir.

5:09pm – Uncertainty Optimization Design of Vehicle Wheel

Made of Long Glass Fiber Reinforced Thermoplastic

Technical Paper Publication. IMECE2018-86769

Daijun Hu, Yingchun Shan, Xiandong Liu, Weihao Chai,

Beihang University, Beijing, China,

Xiaoyin Wang,

Pan Asia

Technical Automotive Center Co., Ltd., Shanghai, China

5-16 SAFETY IN TRANSPORTATION,

AGRICULTURE, AND OFF-ROAD VEHICLES

5-16-2 Safety in Transportation, Agriculture, and Off-

Road Vehicles

Fourth Floor, David L. Lawrence Convention Center, Room 406

3:45pm–5:30pm

Session Chair: John Wiechel,

SEA, Limited, Columbus, OH,

United States

3:45pm – Vulnerability Analysis of Link-Weighted Shanghai

Metrorail Transit Network

Technical Paper Publication. IMECE2018-86863

Yanjie Zhang,

Tongji University, Shanghai, China,

Yalda

Saadat,

University of Maryland College Park, College Park,

MD, United States,

Dongming Zhang,

Tongji University,

Shanghai, China,

Bilal Ayyub,

University of Maryland College

Park, College Park, MD, United States,

Hongwei Huang,

Tongji University, Shanghai, China

4:06pm – Design, Installation, and Validation of a Data

Acquisition System

Technical Paper Publication. IMECE2018-87071

Yucheng Liu, Andrew LeClair, Matthew Doude, Reuben F.

Burch V,

Mississippi State University, Mississippi State, MS,

United States

4:27pm – A Model Based Framework for Wheel Lock

Simulation in a Brake Dynamometer Towards Heavy Road

Vehicle Safety

Technical Paper Publication. IMECE2018-87230

Indeevar Shyam Lanka, Akhil Challa, Nithya Sridhar,

Indian

Institute of Technology Madras, Chennai, India,

Sankarganesh

Sankaralingam,

Madras Engineering Industries Private

Limited, Chennai, India,

Shankar Coimbatore Subramanian,

Indian Institute of Technology, Madras, Chennai, India,

Gunasekaran Vivekanandan,

Madras Engineering Industries

Private Limited, Chennai, India

4:48pm – Post-Failure Recovery Strategies for Metrorail

Transit Networks With Washington D.C. as a Case Study

Technical Paper Publication. IMECE2018-87471

Yalda Saadat,

University of Maryland College Park, College

Park, MD, United States,

Yanjie Zhang, Dongming Zhang,

Hongwei Huang,

Tongji University, Shanghai, China,

Bilal

Ayyub,

University of Maryland College Park, College Park, MD,

United States

5:09pm – Analytical Vehicle KANO Model Development

Technical Paper Publication. IMECE2018-87825

Jiaquan Chen,

FAW, Rochester, MI, United States,

Yin-ping

Chang,

Oakland University

TRACK  DESIGN, RELIABILITY, SAFETY, AND RISK

–

MONDAY, NOVEMBER 

TUESDAY, NOVEMBER 13

5-19 DESIGN, RELIABILITY, SAFETY, AND

RISK PLENARY

5-19-1 Design, Reliability, Safety, and Risk Plenary

Third Floor, David L. Lawrence Convention Center, Room 304

8:00am–8:45am

8:00am – Autonomous Vehicle Safety: Tomorrow’s Rewards

Versus Today’s Reality

Plenary Presentation. IMECE2018-90096

Roger McCarthy,

McCarthy Engineering, Palo Alto, CA, United

States

5-1 PRODUCT AND PROCESS DESIGN

5-1-4 Product and Process Design IV

Third Floor, David L. Lawrence Convention Center, Room 303

10:00am–11:45am

Session Chair: Giorgio Colombo,

Politecnico di Milano, Milan,

Italy

Session Co-Chair: Ragavanantham Shanmugam,

Anna

University, Chennai, India

10:00am – Design and Development of a Low-Cost Roof

Top Solar Ventilator

Technical Paper Publication. IMECE2018-86997

Ragavanantham Shanmugam,

Anna University, Chennai,

India,

Umayakumar Vellaisamy,

Larsen and Toubro Limited,

Chennai, India,

Karthikeyan Balasubramaniam,

Wheels India

Limited, Chennai, India,

Sathishkumar Mani,

Anna University,

Chennai, India

10:21am – A Small-Scale Robotic Spill Detection and

Cleaning Method

Technical Paper Publication. IMECE2018-87180

Hussain F. Alsaif, Houssam Antar, Demitri Baker, Ashmita

Tandon, Jack Manning, Guohua Ma, James McCusker,

Wentworth Institute of Technology, Boston, MA, United States

10:42am – Unmanned Underwater Drone Design for Ocean

Exploration

Technical Paper Publication. IMECE2018-87649

Rojitha Goonesekere, Yu Guo,

Midwestern State University,

Wichita Falls, TX, United States

11:03am – Nuclear Storage Cask Inspection Robotics as a

Case Study in System Design Challenges

Technical Paper Publication. IMECE2018-88374

Jen Bracken, Sean N. Brennan, Ian Van Sant,

Pennsylvania

State University, University Park, PA, United States,

Cliff

Lissenden,

Pennsylvania State University, State College, PA,

United States,

Karl Reichard,

Pennsylvania State University,

University Park, PA, United States

11:24am – The Improved Model of Particle Shape

Prediction Considering the Choke-Level Effect for Cone

Crusher

Technical Paper Publication. IMECE2018-88603

Wei Zhang, Wang Jixin,

Jilin University, Changchun, China,

Yu Xiangjun,

Kunming University, Kunming, China

5-4 CAD, CAM AND CAE DESIGN

5-4-1 CAD, CAM and CAE Design I

Third Floor, David L. Lawrence Convention Center, Room 304

10:00am–11:45am

Session Chair: Marco Rossoni,

Politecnico di Milano, Milan,

Italy

Session Co-Chair: Yucheng Liu,

Mississippi State University,

Mississippi State, MS, United States

10:00am – Computational Design and Analysis of Nitinol-

Based Arch Wedge Support

Technical Paper Publication. IMECE2018-86287

Tyler N. Stranburg, Yucheng Liu, Harish Chander, Adam

Knight,

Mississippi State University, Mississippi State, MS,

United States

10:21am – Analysis of Reciprocating Seals in the Wet-Mate

Electrical Connectors for Underwater Applications

Technical Paper Publication. IMECE2018-86988

Quan Han, Yan Zhang, Haiyang Chen, Juekuan Yang,

Yunfei Chen,

Southeast University, Nanjing, Jiangsu, China

10:42am – BIM Integration to Railway Projects —Case

Study

Technical Presentation. IMECE2018-88851

Mounir Bensalah,

Ibn Tofail University, ENSAK - Colas Rail

Maroc, Casablanca, Morocco,

Abdelmajid Elouadi, Hassan

Mharzi,

Ibn Tofail University, ENSAK, Kénitra, Morocco

11:03am – A Big Shift in Engineering: What Issues are

Expected and How We Could Possibly Deal With Them

Technical Presentation. IMECE2018-89170

Shuichi Fukuda,

Keio University, Minato-ku, Tokyo, Japan

11:24am – An Algorithm for Similar 3D Model Difference

Examination Using Geometric Matching

Technical Paper Publication. IMECE2018-86996

Lianshui Guo,

Yue Yin, Beihang University, Beijing, China

TRACK  DESIGN, RELIABILITY, SAFETY, AND RISK

–

TUESDAY, NOVEMBER 

5-10 GENERAL TOPICS ON RISK, SAFETY

AND RELIABILITY

5-10-1 Topics on Safety and Hazard Analysis

Third Floor, David L. Lawrence Convention Center, Room 305

10:00am–11:45am

Session Chair: Bin Zhou,

FM Global, Norwood, MA, United

States

Session Co-Chair: Arun Veeramany,

Pacic Northwest

National Laboratory, Richland, WA, United States

10:00am – Occupational Safety Implications of the

Changing Energy Mix

Technical Paper Publication. IMECE2018-86678

Jeremy Gernand,

Pennsylvania State University, Port Matilda,

PA, United States

10:21am – Track Shape, Resulting Dynamics, and Injury

Rates of Greyhounds

Technical Paper Publication. IMECE2018-87156

Fatemeh Mahdavi, Md. Imam Hossain, Hasti Hayati, Paul

Kennedy, David Eager,

University of Technology Sydney,

Sydney, NSW, Australia

10:42am – Engineering a Pool Ladder to Prevent Drownings

in Above-Ground Pools

Technical Paper Publication. IMECE2018-87875

William Pierce, Richard Ziernicki,

Knott Laboratory LLC,

Centennial, CO, United States

11:03am – A Set of Preliminary Model Experiments for

Studying Engineering Student Biases in the Assessment

and Prioritization of Risks

Technical Paper Publication. IMECE2018-87888

Jere

my Gernand,

Pennsylvania State University, Port Matilda,

PA, United States

11:24am – Design and Testing of a Novel Human Vibration

Measurement System to Analyze the Connection Between

Vibration Exposure and Hearing Loss

Technical Presentation. IMECE2018-89867

Olivia Bridston, Gaelen Murray, Zac Oldham,

Gonzaga

University, Spokane, WA, United States

5-2 SOCIAL CONTEXT AWARE DESIGN

5-2-1 Social Context Aware Design

Third Floor, David L. Lawrence Convention Center, Room 303

1:45pm–3:30pm

Session Chair: Shuichi Fukuda,

Keio University, Minato-ku,

Tokyo, Japan

Session Co-Chair: Marco Rossoni,

Politecnico di Milano,

Milano, Italy

1:45pm – Printed and 360 Head-Mounted Display

Rendering: A Cross-Cultural Study Comparing Utility,

Spatial Representation and Emotional Capabilities

Technical Paper Publication. IMECE2018-87163

Juan-Carlos Rojas,

Tecnologico de Monterrey, Monterrey,

Nuevo León, Mexico,

Juan Luis Higuera-Trujillo,

Universitat

Politècnica de València, Valencia, Valencia, Spain,

Roberto

Mora-Salinas,

Tecnológico de Monterrey, Puebla, Puebla,

Mexico,

Jessica Galindo,

Tecnologico de Monterrey, Puebla,

Mexico,

Susana Iñarra Abad,

Universitat Politècnica de

València - I3B, Valencia, Spain

2:06pm – Binomial Parameter Estimation and Mapping for

Demand Prediction: A Case Study of Bike Sharing Station

Expansion Design

Technical Paper Publication. IMECE2018-87865

Bryan Watson, Cassandra Telenko,

Georgia Institute of

Technology, Atlanta, GA, United States

2:27pm – Scalability Considerations in the Design of

Microgrids to Support Socioeconomic Development in

Rural Communities

Techni

cal Paper Publication. IMECE2018-88441

Hailie Suk,

University at Buffalo, State University of New York,

Buffalo, NY, United States,

Abhishek Yadav,

University of

Oklahoma, Norman, OK, United States,

John Hall,

University

at Buffalo, State University of New York, Buffalo, NY, United

States

2:48pm – Decision Making Under Severe Uncertainty in

Engineering Projects

Technical Presentation. IMECE2018-89744

Sara Naranjo Corona,

Oakland University, Clarkston, MI,

United States,

Vijitashwa Pandey, Judson Estes,

Oakland

University, Rochester, MI, United States

3:09pm – From Customer Requirements to Detailed Design:

How Do Product Data Change?

Technical Paper Publication. IMECE2018-87900

Marco Rossoni, Giorgio Colombo, Luca Bergonzi,

Politecnico di Milano, Milan, Italy

TRACK  DESIGN, RELIABILITY, SAFETY, AND RISK

–

TUESDAY, NOVEMBER 

5-4 CAD, CAM AND CAE DESIGN

5-4-2 CAD, CAM and CAE Design II

Third Floor, David L. Lawrence Convention Center, Room 304

1:45pm–3:30pm

Session Chair: Daniele Regazzoni,

University of Bergamo,

Dalmine (BG), Italy

Session Co-Chair: Jorge D. Camba,

Purdue University, West

Lafayette, IN, United States

1:45pm – A Study on Sampling Strategies to Determine the

Variability of Parametric History-Based 3D CAD Models

Technical Paper Publication. IMECE2018-87404

Manuel Contero, Ferran Naya, David Pérez-López,

Universitat Politècnica de València, Valencia, Spain,

Pedro

Company,

Universitat Jaume I, Castellón, Castellón, Spain,

Jorge D. Camba,

Purdue University, West Lafayette, IN, United

States

2:06pm – Motion Capture and Data Elaboration to Analyze

Wheelchair Setup and Users’ Performance

Technical Paper Publication. IMECE2018-87531

Daniele Regazzoni, Andrea Vitali,

University of Bergamo,

Dalmine (BG), Italy,

Caterina Rizzi,

University of Bergamo,

Rho (MI), Italy,

Filippo Colombo Zeﬁnetti,

University of

Bergamo, Dalmine (BG), Italy

2:27pm – Research on a Multi-Fidelity Surrogate Model

Based Model Updating Strategy

Technical Paper Publication. IMECE2018-88421

Ping Wang, Qingmiao Wang, Xin Yang,

Chongqing University,

Chongqing, China,

Zhenfei Zhan,

Chongqing University,

Livonia, MI, United States

2:48pm – Extending Model Based Deﬁnition (MBD) to

Capture Product Behavior and Contextual Information

Using a Model Based Feature Information Network (MFIN)

Technical Presentation. IMECE2018-89646

Saikiran Gopalakrishnan, Kevin J. Del Re,

Purdue University,

West Lafayette, IN, United States,

Daniel Campbell,

Capvidia,

Sugar Land, TX, United States,

Rosemary Astheimer, Michael

D. Sangid, Nathan W. Hartman,

Purdue University, West

Lafayette, IN, United States

3:09pm – Identiﬁcation, Modeling and Experimental

Characterization of Oil/Gas Drill Pipe Failure

Technical Presentation. IMECE2018-88815

Jamil Abdo,

Frostburg State University, Frostburg, MD, United

States,

Edris Hassan,

Sultan Qaboos University, Muscat,

Oman,

Jan Kwak,

Qatar University, Doha, Qatar

5-10 GENERAL TOPICS ON RISK, SAFETY

AND RELIABILITY

5-10-2 Topics on Risk and Hazard Analysis

Third Floor, David L. Lawrence Convention Center, Room 305

1:45pm–3:30pm

Session Chair: John Wiechel,

SEA, Limited, Columbus, OH,

United States

Session Co-Chair: Javad Sattarvand,

University of Nevada,

Reno, NV, United States

1:45pm – Escalator Risk and Assessment of Safety Review

Technical Paper Publication. IMECE2018-87889

Thomas Bress,

Exponent, Bowie, MD, United States,

Eugenia Kennedy,

Exponent, Natick, MA, United States,

Rob Kupkovits,

Exponent, Atlanta, GA, United States

2:00pm – Equipment Fault Diagnosis Based on Image

Recognition From Sensor Network Using Deep Learning

Technical Presentation. IMECE2018-89156

Tingting Wei, Ma Shixi, Dengji Zhou,

Shanghai Jiao Tong

University, Shanghai, China

2:15pm – Flexible Parametric Proportional Hazard Model

for Performance Assessment in Complex Systems: Case

Study of Mining Equipment

Technical Presentation. IMECE2018-89315

Amin Moniri-Morad,

Sahand University of Technology, Tabriz,

East Azarbaijan, Iran,

Mohammad Pourgol-Mohammad,

JCI/Sahand University of Technology, York, PA, United States,

Amid Agha Babaei,

Sahand University of Technology, Tabriz,

East Azarbaijan, Iran,

Javad Sattarvand,

University of Nevada,

Reno, NV, United States

2:30pm – Study on the Structural Stability Evaluation of

Telescopic Boom Crane for ROV Lars

Technical Presentation. IMECE2018-89076

Namsub Woo, Young Ju Kim, Hyunji Kim, Sangmok Han,

Korea Institute of Geoscience and Mineral Resources, Pohang,

Korea (Republic),

Jiho Ha,

Korea Institute of Geoscience and

Mineral Resources, Pohang-si, Gyeongsangbuk-do, Korea

(Republic),

Sunchul Huh,

Gyeongsang National University,

Tongyeong-si, Gyeongsangnam-do, Korea (Republic)

2:45pm – Numerical Analysis of Propagation

Characteristics of Hazard and Noxious Substance (HNS)

Based on the Kriging Model

Technical Presentation. IMECE2018-88830

Seong Hyuk Lee, C.H. Jeong, Min Kyu Ko,

Chung-Ang

University, Seoul, Korea (Republic),

Moonjin Lee,

KRISO,

Daejeon, Korea (Republic),

Joo Hyun Moon,

Chung-Ang

University, Seoul, Korea (Republic)

3:00pm – Remaining Useful Life (RUL) Prediction of Rolling

Element Bearing Using Random Forest and Gradient

Boosting Technique

Technical Paper Publication. IMECE2018-87623

Sangram Patil, Aum Patil, Vishwadeep Handikherkar,

Sumit Desai, Vikas Phalle, Faruk Kazi,

Technological Institute, Mumbai, Maharashtra, India

TRACK  DESIGN, RELIABILITY, SAFETY, AND RISK

–

TUESDAY, NOVEMBER 

5-18 GENERAL

5-18-1 General

Third Floor, David L. Lawrence Convention Center, Room 302

3:45pm–5:30pm

Session Chair: Mohammad Pourgol-Mohammad,

JCI/Sahand

University of Technology, York, PA, United States

3:45pm – How Much Is Too Much for a Seatback Recline to

Promote Occupant Submarining: A Study Using Rigid Seat

Sled Model and 5th Percentile Female ATD

Technical Paper Publication. IMECE2018-86258

Chandra Thorbole,

TST LLC, Rogers, AR, United States

4:27pm – Extension Injuries During Motor Vehicle Collisions

in Thoracic Spines With Pre-Existing Pathology

Technical Paper Publication. IMECE2018-86701

Mathieu Davis, Jessica Isaacs,

Exponent, Philadelphia, PA,

United States,

Sridhar Natarajan,

Exponent, Phoenix, AZ,

United States,

Amy Mumbower,

UT Health San Antonio, San

Antonio, TX, United States,

Jacob Fisher,

Exponent,

Philadelphia, PA, United States

4:48pm – Assessing Occupant Motion and Seat Back

Performance of Contemporary Seats in Rear Impact

Collisions

Technical Paper Publication. IMECE2018-87997

Steven Meyer, Arin Nelson, Jeremy McMillin, Brian Herbst,

Safety Analysis & Forensic Engineering (SAFE) Laboratories

LLC, Goleta, CA, United States

5:09pm – Comparison Study on Reliability Index Approach,

Performance Measure Approach and Monte Carlo

Simulation Method for Pipeline Reliability Evaluation

Technical Presentation. IMECE2018-87326

Shabbir Memon, Obaidur Rahman Mohammed, Hamid

Lankarani,

Wichita State University, Wichita, KS, United States

5-18-2 General

Third Floor, David L. Lawrence Convention Center, Room 303

3:45pm–5:30pm

Session Chair: Mohammad Pourgol-Mohammad,

JCI/Sahand

University of Technology, York, PA, United States

3:45pm – A Decision-Based Mobility Model and Value of

Information for Autonomous Ground Vehicles

Technical Presentation. IMECE2018-89630

Sam Kassoumeh, Line Deschenes, Vijitashwa Pandey,

Oakland University, Rochester, MI, United States,

David Gorsich,

U.S. Army RDECOM - TARDEC, Warren, MI,

United States

4:06pm – Design of Smart Electromagnetic Clutch and

Development of Control Algorithm for Implementation in a

4-Wheeler

Technical Presentation. IMECE2018-88759

Vedanth Reddy,

National institute of Technology Suratkal-

Karnataka, Suratkal, Karnataka, India

4:27pm – Calculation of Neck Loads in Minor Impact

Technical Paper Publication. IMECE2018-88655

John Wiechel,

SEA, Limited, Columbus, OH, United States

4:48pm – Mitigating Vehicle Incompatibility in Rear Impacts

Technical Paper Publication. IMECE2018-88268

Christopher Clarke,

SAFE, Santa Barbara, CA, United

States,

Steven Meyer,

SAFE LLC, Goleta, CA, United States,

Brian Herbst,

SAFE Laboratories LLC, Goleta, CA, United

States,

Lauren Bell,

SAFE, Santa Barbara, CA, United States

5:09pm – Analysis of Deformation Induced Vehicle Door

Latch Actuation

Technical Paper Publication. IMECE2018-88205

Christopher Clarke,

SAFE, Santa Barbara, CA, United States,

Steven Meyer, Brian Herbst,

SAFE Laboratories LLC, Goleta,

CA, United States,

Lauren Bell,

SAFE, Santa Barbara, CA,

United States

TRACK  DESIGN, RELIABILITY, SAFETY, AND RISK

–

TUESDAY, NOVEMBER 

6-1-1: Dynamics, Vibration, and Control Plenary

6-2-1: Dynamics, Vibration, and Control – I

6-2-2: Dynamics, Vibration, and Control – II

6-3-1: Nonlinear Dynamics, Control, and Stochastic Mechanics I

6-3-2: Nonlinear Dynamics, Control, and Stochastic Mechanics II

6-4-1: Robot Control I

6-4-2: Robot Control II

6-4-3: Robot Design I

6-4-4: Robot Design II

6-4-5: Mechanism Design I

6-4-6: Mechanism Design II

6-4-7: Compliant Mechanisms

6-5-1: Fluid-Structure Interaction I

6-5-2: Fluid-Structure Interaction

6-6-1: Vibration, Noise Control and Damping Technologies I

6-6-2: Vibration, Noise Control and Damping Technologies II

6-6-3: Vibration, Noise Control and Damping Technologies III

6-7-1: Dynamics and Control in Micro/Nano Engineering I

6-8-1: Mec

hanics of Smart Structures

6-8-2: Energy Harvesting and Transducers

6-9-1: Novel Control of Dynamic System I

6-9-2: Novel Control of Dynamic System II

6-10-1: Multibody Dynamic Systems and Applications I

6-10-2: Multibody Dynamic Systems and Applications II

6-10-3: Multibody Dynamic Systems and Applications III

6-11-1: Vibrations of Continuous Systems I

6-11-2: Vibrations of Continuous Systems II

6-12-1: Mobile Service Robots and Unmanned Vehicles I

6-12-2: Mobile Service Robots and Unmanned Vehicles II

6-13-1: Control Theory and Applications I

6-15-1: Measurement and Anal

ysis Techniques in Nonlinear Dynamics I

6-17-1: Multi-Physics Dynamics-Control & Diagnostics-Prognostics of Structures I

6-19-1: Renewable Energy, Structural Health Monitoring, and Distributed

Structural Systems I

6-20-1: Dynamics, Vibration, and Control for Structural Health Monitoring

Applications I

Track Organizers

Dumitru Caruntu,

University of Texas

Rio Grande Valley, United States

Bogdan Epureanu,

University of

Michigan, United States

Marco Amabili,

McGill University,

Canada

Topic Organizers

Dumitru Caruntu,

University of Texas

Rio Grande Valley, United States

Bogdan Epureanu,

University of

Michigan, United States

Marco Amabili,

McGill University,

Canada

Zhibin Lin,

North Dakota State University,

United States

Xiangqing Tangpong,

North Dakota State

University, United States

Ying Huang,

North Dakota State

University, United States

Hong Zhou,

Texas A&M University-

Kingsville, United States

Puren Ouyang,

Ryerson University,

Canada

Kostas Karazis,

Framatome Inc., United

States

Dennis Gottuso,

AREVA, United States

Farbod Alijani,

Technical University of

Delft, Netherlands

Brian Painter,

Framatome Inc., United

States

Rinaldo Garziera,

Universitry of Parma,

Italy

Eleonora Tubaldi,

University of Arizona,

United States

Huancai Lu,

Zhejiang University of

Technology, China

Chin-An Tan,

Wayne State University,

United States

Donald Michael McFarland,

University

of Illinois at Urbana-Champaign,

United States

Hornsen(HS) Tzou,

Nanjing University of

Aeronautics and Astronautics, China

Hua Li,

Zhejiang University, China

Lifeng Wang,

Nanjing University of

Aeronautics and Astronautics, China

C. Steve Suh,

Texas A&M University,

United States

Weidong Zhu,

University of Maryland,

Baltimore County, United States

Shanzhong (Shawn) Duan,

Saint Martin’s

University, United States

William Prescott,

Siemens Product

Lifecycle Management, United States

Ilie Talpasanu,

Wentworth Institute of

Technology, United States

Marco Amabili,

McGill University,

Canada

Giuseppe Quaglia,

Politecnico Di

Torino – DIMEAS, Italy

Luca Bruzzone,

DIMEC – Università degli

Studi di Genova, Italy

Giulio Reina,

U Salento, Italy

Renato Vidoni,

Free University of

Bolzano, Italy

Majura Selekwa,

North Dakota State

University, United States

Dale McDonald,

Gonzaga University,

United States

Pezhman Hassanpour,

Loyola

Marymount University, United States

Ioannis Georgiou,

Nat'l Tech University of

Athens, Greece

Francesco Romeo,

SAPIENZA Universita

of Roma, Italy

Nikolaos Xiros,

University of New

Orleans, Naval Arch & Marine Eng.,

United States

C. Steve Suh,

Texas A&M University,

United States

Andrei Zagrai,

New Mexico Institute of

Mining & Technology, United States

Session Organizers

Christopher Jobes,

NIOSH, United

States

Ashkan Eslaminejad,

North Dakota State

University, United States

Sohel Anwar,

Indiana University-Purdue

University Indianapolis, United States

Isaac Elishakoff,

Florida Atlantic

University, United States

Ho-Hoon Lee,

Southeastern LA

University, United States

Yong Zhu,

Wilkes University, United

States

Yoram Halevi,

Tech-israel Institute of

Tech, Israel

Wooram Park,

University of Texas at

Dallas, United States

Vivek Sangwan,

Indian Institute of

Technology Bombay, India

Kiwon Sohn,

University of Hartford,

United States

He Shen,

California State University, Los

Angeles, United States

Yin-ping Chang,

Oakland University,

United States

Sebastian Roa Prada,

Universidad

Autonoma de Bucaramanga, Colombia

Hong Zhou,

Texas A&M University-

Kingsville, United States

Naoufel Azouz,

University of Evry, France

Ayse Tekes,

Kennesaw State University,

United States

Robley G. Kirk,

Virginia Tech, United

States

Akintoye O. Oyelade,

University of

Lagos, Nigeria

Ashok Belegundu,

Pennsylvania State

Univ, United States

Saad Ilyas,

King Abdullah University of

Science & Tech, Saudi Arabia

Hornsen(HS) Tzou,

Nanjing University of

Aeronautics and Astronautics, China

C. Steve Suh,

Texas A&M University,

United States

Shanzhong (Shawn) Duan,

Saint Martin's

University, United States

Isaac Elishakoff,

Florida Atlantic

University, United States

Berkan Alanbay,

Virginia Tech, United

States

Ibrahim F Gebrel,

University of Western

Ontario, Canada

Aman Kumar,

Indian Institute of

Technology Kharagpur, India

Mustapha Fofana,

Worcester Polytechnic

Inst, United States

Giuseppe Quaglia,

Politecnico Di

Torino – DIMEAS, Italy

Jacob A. Farber,

University of Pittsburgh,

United States

Pezhman Hassanpour,

Loyola

Marymount University, United States

Nikolaos Xiros,

University of New

Orleans, Naval Arch & Marine Eng.,

United States

Andrei Zagrai,

New Mexico Institute of

Mining & Technology, United States

TRACK 6 DYNAMICS, VIBRATION, AND

CONTROL

MONDAY, NOVEMBER 12

6-4 DESIGN AND CONTROL OF ROBOTS,

MECHANISMS AND STRUCTURES

6-4-1 Robot Control I

Third Floor, David L. Lawrence Convention Center, Room 307

9:45am–11:30am

Session Chair: Ho-Hoon Lee,

Southeastern Louisiana

University, Hammond, LA, United States

Session Co-Chair: Yong Zhu,

Wilkes University, Wilkes-Barre,

PA, United States

9:45am – Control of a Robotic Prosthetic Hand Using an

EMG Signal Based Counter

Technical Paper Publication. IMECE2018-86032

Kyle Stanek, Nathan Barnhart, Yong Zhu,

Wilkes University,

Wilkes-Barre, PA, United States

10:06am – Dynamic Modeling and Control of the Hexapod

Robot Using Matlab SimMechanics

Technical Paper Publication. IMECE2018-88226

Sameh I. Beaber,

Military Technical College, Cairo, Cairo,

Egypt,

Abdelrahman Zaghloul,

McMaster University,

Hamilton, ON, Canada,

Mohamed Kamel, Wessam Hussein,

Military Technical College, Cairo, Egypt

10:27am – Simultaneously Satisfying Multi-Objective

Design of Structural and Control Systems Based on

Consideration of Uncertainty by Set-Based Approach

Technical Paper Publication. IMECE2018-86757

Haruo Ishikawa, Naoko Sasaki,

The Electro-

Communications, Chofu, Japan

10:48am – Control for a Two-Link Planar Robot With an

Actuated Tail

Technical Paper Publication. IMECE2018-86827

Xinjia Yu,

Carnegie Mellon University, Pittsburgh, PA, United

States,

Mark Bedillion,

Carnegie Mellon University, Gibsonia,

PA, United States

11:09am – A Path-Generating Motion Control Scheme for a

Mobile Robot in the Environment of Obstacles

Technical Paper Publication. IMECE2018-86524

Ho-Hoon Lee,

Southeastern Louisiana University, Hammond,

LA, United States

6-4-7 Compliant Mechanisms

Third Floor, David L. Lawrence Convention Center, Room 308

9:45am–11:30am

Session Chair: Hong Zhou,

Texas A&M University-Kingsville,

Kingsville, TX, United States

Session Co-Chair: Ayse Tekes,

Kennesaw State University,

Marietta, GA, United States

9:45am – Compliant Translational Double Exact Dwell

Mechanism

Technical Paper Publication. IMECE2018-86073

Ayse Tekes, Hongkuan Lin,

Kennesaw State University,

Marietta, GA, United States

10:06am – On Novel Dynamic Displacement Ampliﬁcation

Using Compliant Mechanisms

Technical Paper Publication. IMECE2018-87638

Abhijit Tanksale, Prasanna Gandhi,

Indian Institute of

Technology, Bombay, Mumbai, Maharashtra, India

10:27am – Reduction of Jerk Through Optimization of a

Knee Assistive Device Designed Using Four-Bar Controlled

Compliance Actuator

Technical Paper Publication. IMECE2018-87012

Saikat Sahoo, Aditya Jain, Dilip Pratihar,

Indian Institute of

Technology Kharagpur, Kharagpur, West Bengal, India

10:48am – Large Deformation Analysis and Experiments

With Double Parallelogram Compliant Mechanisms

Technical Paper Publication. IMECE2018-87604

Abhijit Tanksale, Prasanna Gandhi,

Indian Institute of

Technology, Bombay, Mumbai, Maharashtra, India

11:09am – Synthesizing Bidirectional Constant Torque

Compliant Mechanisms Using Precompressed Beams

Technical Paper Publication. IMECE2018-86469

Monik Thanaki, Hong Zhou,

Texas A&M University-Kingsville,

Kingsville, TX, United States

6-12 MOBILE SERVICE ROBOTS AND

UNMANNED VEHICLES

6-12-1 Mobile Service Robots and Unmanned

Vehicles I

Third Floor, David L. Lawrence Convention Center, Room 315

9:45am–11:30am

Session Chair: Giuseppe Quaglia,

Politecnico di Torino, Torino,

Italy

9:45am – Rese_Q: UGV for Rescue Tasks Functional Design

Technical Paper Publication. IMECE2018-86395

Giuseppe Quaglia, Paride Cavallone,

Politecnico di Torino,

Torino, Italy

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

MONDAY, NOVEMBER 

10:06am – Image Identiﬁcation of a Moving Object Based

on an Improved Canny Edge Detection Algorithm

Technical Paper Publication. IMECE2018-86792

Yang Liu, Lingyu Sun, Lijun Li, Yiben Zhang,

Beihang

University, Beijing, China,

Zongmiao Dai, Zhenkai Xiong,

Zhengzhou Electromechanical Engineering Research Institute,

Zhengzhou, China

10:27am – GA Optimized Formation Control of Autonomous

Underwater Vehicles

Technical Paper Publication. IMECE2018-87299

Mansour Karkoub,

Texas A&M University, College Station, TX,

United States,

Lotﬁ Romdhane,

American University of

Sharjah, Sharjah, United Arab Emir.

10:48am – Performance Analysis of UAV Visual Landmark

Tracking Under Rapid Motion

Technical Paper Publication. IMECE2018-88345

Eric Jacobson, Akin Tatoglu,

University of Hartford, West

Hartford, CT, United States

11:09am – On Self-Driving Car Safety: Occupancy Map

Modiﬁcation With Rapid Emergency Vehicle Detection

Technical Paper Publication. IMECE2018-88492

Akin Tatoglu, Eoin King, Jarrett Lagler,

University of Hartford,

West Hartford, CT, United States

6-13 CONTROL THEORY AND

APPLICATIONS

6-13-1 Control Theory and Applications I

Third Floor, David L. Lawrence Convention Center, Room 309

9:45am–11:30am

Session Chair: Jacob A. Farber,

University of Pittsburgh,

Pittsburgh, PA, United States

9:45am – Improving Boiler Efﬁciency Using PLC Controller

Technical Paper Publication. IMECE2018-86100

Hung Tang,

TAI Engineering, York, PA, United States,

Ma’moun Abu-Ayyad,

Penn State Harrisburg, Middletwon, PA,

United States

10:00am – Dynamic Exposure Model of Scanning Beam

Interference Lithography

Technical Paper Publication. IMECE2018-86979

Sen Lu, Kaiming Yang, Yu Zhu, Leijie Wang, Ming Zhang

Tsinghua University, Beijing, China

10:15am – Using Multiple-Model Adaptive Estimation and

System Identiﬁcation for Fault Detection in Nuclear Power

Plants

Technical Paper Publication. IMECE2018-87616

Jacob A. Farber, Daniel G. Cole,

University of Pittsburgh,

Pittsburgh, PA, United States

10:30am – Intelligent Adaptive Control for Anti-Lock

Braking System

Technical Paper Publication. IMECE2018-87659

Wafa Batayneh,

Jordan University of Science and Technology,

Irbid, Jordan,

Mohammad Jaradat,

American University of

Sharjah, Sharjah, United Arab Emir.,

Ahmad Bataineh,

Jordan

University of Science and Technology, Irbid, Jordan

10:45am – A Game-Theoretic Approach to Defending

Nuclear Instrumentation and Control Systems From

Cyber-Threats

Technical Paper Publication. IMECE2018-87713

Lee T. Maccarone, Daniel G. Cole,

University of Pittsburgh,

Pittsburgh, PA, United States

11:00am – Application of the Levenberg-Marquardt

Algorithm to Control a Gough-Stewart Platform

Technical Presentation. IMECE2018-89399

David Gordon, Kevin Anderson, Nolan Tsuchiya,

California

State Polytechnic University, Pomona, Pomona, CA, United

States

6-15 MEASUREMENT AND ANALYSIS

TECHNIQUES IN NONLINEAR DYNAMIC

6-15-1 Measurement and Analysis Techniques in

Nonlinear Dynamics I

Third Floor, David L. Lawrence Convention Center, Room 311

9:45am–11:30am

Session Chair: Pezhman Hassanpour,

Loyola Marymount

University, Los Angeles, CA, United States

9:45am – Effect of Eccentricity on the Nonlinear Dynamic

Behavior of a Cam and Follower Mechanism With Clearance

Technical Paper Publication. IMECE2018-86202

Louay S. Yousuf,

Auburn University, Walled Lake, MI, United

States,

Dan Marghitu,

Auburn University, Auburn, AL, United

States

10:06am – Numerical Modeling and Analysis of Nonlinear

Dynamic Response for a Bolted Joint Beam Considering

Interface Frictional Contact

Technical Paper Publication. IMECE2018-86743

Dongwu Li, Chao Xu,

Northwestern Polytechnical University,

Xi’an, Shaanxi, China,

Dong Wang,

China Academy of

Engineering Physics, Mianyang, China,

Lihua Wen,

Northwestern Polytechnical University, Xi’an, Shaanxi, China

10:27am – An Improved Analytical Model of Friction and

Ball Motion in Linear Ball Bearings: With Application to

Ball-To-Ball Contact Prediction

Technical Paper Publication. IMECE2018-88033

Bo Lin, Molong Duan, Chinedum Okwudire,

University of

Michigan, Ann Arbor, MI, United States,

Jason Wou,

Ford

Motor Company, Dearborn, MI, United States

10:48am – Dynamic Characteristics of Resonant Beams

With Passive Thermal Stress Regulators

Technical Paper Publication. IMECE2018-88536

Tyler Kellar, Pezhman Hassanpour,

Loyola Marymount

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

MONDAY, NOVEMBER 

11:09am – Approximate Response of Beam-Type Resonant

Biosensors

Technical Paper Publication. IMECE2018-88535

Pezhman Hassanpour,

Loyola Marymount University, Los

Angeles, CA, United States

6-17 MULTI-PHYSICS DYNAMICS-CONTROL

& DIAGNOSTICS-PROGNOSTICS OF

STRUCTURES

6-17-1 Multi-Physics Dynamics-Control &

Diagnostics-Prognostics of Structures I

Third Floor, David L. Lawrence Convention Center, Room 310

9:45am–11:30am

Session Chair: Nikolaos Xiros,

University of New Orleans,

Naval Arch & Marine Eng, New Orleans, LA, United States

9:45am – Toward a Contactless Hydrokinetic Energy

Harvester: A Computational Magnetic Field Estimation

Technical Paper Publication. IMECE2018-87063

Georgios Tsakyridis, Nikolaos Xiros,

University of New

Orleans, New Orleans, LA, United States,

Michael Bernitsas,

University of Michigan, Ann Arbor, MI, United States

10:06am – Research on a Mechanical Model of the

Connecting and Sliding Parts in Motion for a Reciprocating

Compressor

Technical Paper Publication. IMECE2018-87392

Yu Mizobe, Takashi Saito,

Yamaguchi University,

Ube/Yamaguchi, Japan,

Yoshifumi Mori,

Tokuyama

Corporation, Yamaguchi, Japan

10:27am – Study on Dependency of Dynamic Properties in

a Rolling Roller on Fine Coal Upon the Running Velocity

Technical Paper Publication. IMECE2018-87416

Kentaro O

shiro,

Yamaguchi University, Ube/Yamaguchi,

Japan,

Akira Kobayashi, Kazuhiro Watanabe, Emi Ohno,

Makoto Echizenya,

IHI Corporation, Koto-ku, Japan,

Katsuhide Fujita,

National Institute of Technology, Ube

College, Ube, Japan,

Takashi Saito,

Yamaguchi University,

Ube/Yamaguchi, Japan

10:48am – Shape Memory Alloy Based Rotational Actuator

Technical Paper Publication. IMECE2018-87646

Nicholas Hofmann, Michael Hennessey,

University of St.

Thomas, St. Paul, MN, United States

11:09am – System Identiﬁcation for Control of a Bow

Thruster With Brushless Motor and Shaft-Less Propeller

Technical Paper Publication. IMECE2018-88029

Priyatham Sanjeeva Reddy Ramidi, Nikolaos Xiros,

University of New Orleans, New Orleans, LA, United States,

Stavros Lalizas, Anastasios Papavasileiou, Vasileios

Douvris, Nikolas Theodorou, Alexandros Lalizas,

LALIZAS

Hellas, Piraeus, Piraeus, Greece

6-2 GENERAL

6-2-1 Dynamics, Vibration, and Control-I

Third Floor, David L. Lawrence Convention Center, Room 308

1:45pm–3:30pm

Session Chair: Christopher Jobes,

NIOSH, Pittsburgh, PA,

United States

Session Co-Chair: Ashkan Eslaminejad,

North Dakota State

University, Fargo, ND, United States

1:45pm – Identiﬁcation of Lug Excitation Force by Using

Three-Dimensional Rigid Ring Model

Technical Presentation. IMECE2018-86339

Katsuhide Fujita,

National Institute of Technology, Ube

College, Ube, Japan,

Takashi Saito,

Yamaguchi University,

Ube/Yamaguchi, Japan,

Mitsugu Kaneko,

Yanmar Co., Ltd.,

Maibara, Japan

2:06pm – Development of Vehicle Seat by Embedding

Urethane Within Air Cell

Technical Paper Publication. IMECE2018-86389

Shinichiro Ota, Yuji Nakamura,

Okayama Prefectural

University, Okayama, Japan

2:27pm – Dynamic Modeling System to Determine Stopping

Distances of Mobile Underground Coal Equipment

Technical Paper Publication. IMECE2018-86422

Christopher Jobes, Jacob Carr,

NIOSH, Pittsburgh, PA,

United States

2:48pm – A Comparative Study of Rapid Quadrupedal

Sprinting and Turning Dynamics on Different Terrains and

Conditions: Racing Greyhounds Galloping Dynamics

Technical Paper Publication. IMECE2018-87144

Hasti Hayati,

University of Technology Sydney, Sydney,

NSW, Australia,

Paul Walker, Fatemeh Mahdavi,

University

of Technology Sydney, Ultimo, NSW, Australia,

Robert

Stephenson,

University of Technology Sydney, Sydney,

NSW, Australia,

Terry Brown,

University of Technology

Sydney, Ultimo, NSW, Australia,

David Eager,

University of

Technology Sydney, Sydney, NSW, Australia

3:09pm – Numerical Research on Machining Stability

Subject to Delayed PID Control

Technical Paper Publication. IMECE2018-87475

Mingjie Li, Xiaojian Zhang, Yakun Xie,

Huazhong University

of Science and Technology, Wuhan City, China

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

MONDAY, NOVEMBER 

6-4 DESIGN AND CONTROL OF ROBOTS,

MECHANISMS AND STRUCTURES

6-4-2 Robot Control II

Third Floor, David L. Lawrence Convention Center, Room 307

1:45pm–3:30pm

Session Chair: Yoram Halevi,

Technion-Israel Institute of

Technology, Technion City, Haifa, Israel

Session Co-Chair: Wooram Park,

University of Texas at Dallas,

Richardson, TX, United States

1:45pm – Brain-Computer Interface Application in Robotic

Gripper Control

Technical Paper Publication. IMECE2018-86274

Briana Landavazo, Vidya Nandikolla,

California State

University Northridge, Northridge, CA, United States

2:06pm – Minimum Energy Control of Redundant Systems

Using Evolutionary Bi-Level Optimization

Technical Paper Publication. IMECE2018-88709

Uriel Nusbaum,

Technion, Haifa, Israel,

Miri Weiss Cohen,

Braude College of Engineering, Karmiel, Israel,

Yoram Halevi,

Technion-Israel Institute of Technology, Technion City, Haifa,

Israel

2:27pm – Light-Powered Soft Robots

Technical Presentation. IMECE2018-89146

Shengqiang Cai,

University of California San Diego, La Jolla,

CA, United States

2:48pm – Dynamic Analysis for Motor-Powered Periotomes

in Dentistry

Technical Paper Publication. IMECE2018-88196

Jianping Lin, Om A. Sharma, Wooram Park,

University of

Texas at Dallas, Richardson, TX, United States

3:09pm – Functional Design of a Robust Dynamic Position

and Data Acquisition System

Technical Paper Publication. IMECE2018-87993

James Meyers,

U.S. Coast Gaurd, Quincy, MA, United States,

Tooran Emami,

U.S. Coast Gaurd Academy, East Lyme, CT,

United States

6-8 SMART STRUCTURES AND

STRUCTRONIC SYSTEMS: SENSING,

ENERGY GENERATION AND CONTROL

6-8-1 Mechanics of Smart Structures

Third Floor, David L. Lawrence Convention Center, Room 309

1:45pm–3:30pm

Session Chair: Hornsen (HS) Tzou,

Nanjing University of

Aeronautics and Astronautics, Nanjing, Jiangsu, China

1:45pm – Development of Soft Body Rescue-Bot Using 3D

Printing

Technical Paper Publication. IMECE2018-86860

Cody Lewis, Jared Legg, Minchul Shin,

Georgia Southern

University, Statesboro, GA, United States

2:00pm – Inductance of Twisted Nylon Actuators With

Conductive Wires

Technical Presentation. IMECE2018-87214

Hua Li, Haochen Ye, K.M. Hu,

Zhejiang University, Hangzhou,

China

2:15pm – Structural Self-Sensing by Capacitance

Measurement

Technical Presentation. IMECE2018-87748

Deborah D.L. Chung, Kairong Shi, Yulin Wang, Asma A.

Eddib,

University at Buffalo, State University of New York,

Buffalo, NY, United States

2:30pm – Study on Large Deformation of Laminated

Piezoelectric Rectangular Plate

Technical Paper Publication. IMECE2018-88599

Lihua Chen, Shoujie Cui,

Beijing University of Technology,

Beijing, China,

Xiaozhi Zhang,

University of Vermont,

Burlington, VT, United States,

Wei Zhang,

Beijing University of

Technology, Beijing, China

2:45pm – Frequency Control of Simply Supported Beam by

Light-Activated Shape Memory Polymers

Technical Presentation. IMECE2018-88814

Yang Yunze, Yuan Jihai, Fan Mu,

Nanjing University of

Aeronautics and Astronautics, Nanjing, Jiangsu, China

3:00pm – Mesh-Free Vibration Analysis of Suspended

Strain Gradient Nano-Plate

Technical Paper Publication. IMECE2018-87428

Wang Li, Lifeng Wang, Jingnong Jiang,

Nanjing University of

Aeronautics and Astronautics, Nanjing, Jiangsu, China

6-9 NOVEL CONTROL OF DYNAMIC

SYSTEM AND

6-9-1 Novel Control of Dynamic System I

Third Floor, David L. Lawrence Convention Center, Room 310

1:45pm–3:30pm

Session Chair: C. Steve Suh,

Texas A&M University, College

Station, TX, United States

1:45pm – A Novel Nonlinear Time-Frequency Strategy for

Stabilizing Inverted Pendulum Cart System

Technical Paper Publication. IMECE2018-86758

Zilong Zhang, C. Steve Suh,

Texas A&M University, College

Station, TX, United States

2:06pm – An Experimental Study of Periodic Motions in a

Dufﬁng Oscillator

Technical Paper Publication. IMECE2018-86833

Yu Guo,

Midwestern State University, Wichita Falls, TX, United

States,

Albert Luo,

Southern Illinois University, Edwardsville,

IL, United States,

Abigail Reyes, Zeltzin Reyes,

Midwestern

State University, Wichita Falls, TX, United States

2:27pm – Period Motions in a Periodically Forced, Damped

Double Pendulum

Technical Paper Publication. IMECE2018-86849

Chuan Guo, Albert Luo,

Souther

Edwards

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

MONDAY, NOVEMBER 

2:48pm – On the Proper Description of Complex Network

Dynamics

Technical Paper Publication. IMECE2018-88051

Chun-Lin Yang, C. Steve Suh,

Texas A&M University, College

Station, TX, United States

3:09pm – An Optimization Model of High-Speed and High-

Precision Machining Based on Model Predictive Control

Technical Paper Publication. IMECE2018-88326

Jing Zhang, Jiexiong Ding, Qingzhao Li, Qicheng Ding,

Zhong Jiang, Li Du, Wei Wang,

University of Electrionic

Science and Technology of China, Chengdu, China

6-12 MOBILE SERVICE ROBOTS AND

UNMANNED VEHICLES

6-12-2 Mobile Service Robots and Unmanned

Vehicles II

Third Floor, David L. Lawrence Convention Center, Room 315

1:45pm–3:30pm

Session Chair: Giuseppe Quaglia,

Politecnico di Torino, Torino,

Italy

1:45pm – Iterative Modeling of a Small Underwater

Tethered Remotely Operated Vehicle

Technical Paper Publication. IMECE2018-88501

Andrés F. Aldana, Helio Sneyder Esteban Villegas,

Universidad Autonóma de Bucaramanga, Bucaramanga,

Colombia,

Sebastian Roa Prada,

Universidad Autonoma de

Bucaramanga, Bucaramanga, Santander, Colombia

2:06pm – Design of a Robust Yaw Rate Controller Using

Sliding Mode Control and Extended State Observer for

Navigation of an Autonomous Ground Vehicle

Technical Paper Publication. IMECE2018-88752

Suraj Borate,

Defence Institute of Advanced Technology,

Pune, India,

Shubhashisa Sahoo,

Center for Articial

Intelligence and Robotics, Bangalore, India,

Devika K.B.,

Shankar Coimbatore Subramanian,

Indian Institute of

Technology, Madras, Chennai, India,

K.K. Mangrulkar,

Defence Institute of Advanced Technology, Pune, India

2:27pm – Low-Light Pedestrian Recognition System

Technical Presentation. IMECE2018-88835

Fei Lin, John E. Ball,

Mississippi State University, Starkville,

MS, United States

2:48pm – Advances in Multirobot Adaptive Navigation of

Environmental Scalar Fields

Technical Presentation. IMECE2018-88910

Christopher Kitts,

Santa Clara University, Santa Clara, CA,

United States

6-19 RENEWABLE ENERGY, STRUCTURAL

HEALTH MONITORING, AND

DISTRIBUTED STRUCTURAL SYSTEMS

6-19-1 Renewable Energy, Structural Health

Monitoring, and Distributed Structural Systems I

Third Floor, David L. Lawrence Convention Center, Room 311

1:45pm–3:30pm

Session Chair: Weidong Zhu,

University of Maryland,

Baltimore County, Baltimore, MD, United States

1:45pm – Effectiveness of Using Mixed Coordinates in

Modeling Wind Turbines

Technical Paper Publication. IMECE2018-87493

Ayman A. Nada, Ali S. Al-Shahrani,

Jazan University, Jazan,

Saudi Arabia

2:06pm – Effect of Damage on the Normalized Frequency of

Beam-Like Structures Using Vibration Based Technique

Technical Presentation. IMECE2018-88788

Putti Srinivasa Rao,

Andhra University, Visakhapatnam,

Andhra Pradesh, India,

Siva Sankara Babu Chinka,

Lakireddy

Balireddy College of Engineering, Mylavaram, India,

Balakrishna Adavi,

SRKR College of Engineering,

Bhimavaram, India

2:27pm – Damage Recognition in Plate-Form Structures

Using Changes in Modal Strain Energy

Technical Presentation. IMECE2018-88798

Putti Srinivasa Rao,

Andhra University, Visakhapatnam,

Andhra Pradesh, India,

Ramesh Lanka,

Gudlavalleru

Engineering College, Gudlavalleru, India

2:48pm – Proof Mass Study for Low Frequency Vibration

Energy Harvesting of Piezoelectric Cantilever

Technical Paper Publication. IMECE2018-88163

Lu Wang,

Xi’an Jiaotong University, Xi’an, Shaanxi, China,

Libo Zhao, Dejiang Lu, Chen Jia, Zhuangde Jiang,

Xi’an

Jiaotong University, Xi’an, Shaanxi, China

3:09pm – Absolute Vibration Suppression (AVS) Control for

Fractional Order Systems

Technical Presentation. IMECE2018-88710

Yoram Halevi,

Technion-Israel Institute of Tech, Technion City,

Haifa, Israel

6-2 GENERAL

6-2-2 Dynamics, Vibration, and Control-II

Third Floor, David L. Lawrence Convention Center, Room 308

3:45pm–5:30pm

Session Chair: Sohel Anwar,

Indiana University-Purdue

University Indianapolis, Carmel, IN, United States

3:45pm – Sommerfeld Effect and Passive Energy

Reallocation in a Self-Synchronizing System

Technical Paper Publication. IMECE2018-87559

Anubhab Sinha, Saurabh Kumar Bharti, Arun Kumar

Samantaray, Ranjan Bhattacharyya,

Indian Institute of

Technology Kharagpur

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

MONDAY, NOVEMBER 

4:06pm – Finite Element Analysis (FEA) for Optimization the

Design of a Baja SAE Chassis

Technical Paper Publication. IMECE2018-87564

Jessica Gissella Maradey Lazaro, Helio Sneyder Esteban

Villegas, Braulio José Blanco Caballero,

Universidad

Autonóma de Bucaramanga, Bucaramanga, Colombia

4:27pm – A Virtual Sensor for Soot Load Estimation in

Diesel Particulate Filters

Technical Paper Publication. IMECE2018-88094

Pratik V. Magar, Afshin Izadian,

Indiana University-Purdue

University Indianapolis, Indianapolis, IN, United States,

Sohel Anwar,

Indiana University-Purdue University

Indianapolis, Carmel, IN, United States

4:48pm – Analysis of Magneto Electro Elastic Circular

Plates Based on DQ Method

Technical Presentation. IMECE2018-88782

Saeed Amir,

University of Kashan, Kashan, Isfahan, Iran,

Abbasn Loghman, Ehsan Arshid,

Kashan University, Kashan,

Iran,

Ali Haghshenas,

Louisiana State University, Louisiana

State, LA, United States

5:09pm – An Efﬁcient Layerwise Theory Based Facet Shell

Element for Modeling of Composite and Sandwich Shells

With Multiple Delaminations Using a Hybrid Continuity

Method

Technical Presentation. IMECE2018-89558

Adnan Ahmed, Santosh Kapuria,

Indian Institute of

Technology Delhi, New Delhi, India

6-4 DESIGN AND CONTROL OF ROBOTS,

MECHANISMS AND STRUCTURES

6-4-3 Robot Design I

Third Floor, David L. Lawrence Convention Center, Room 307

3:45pm–5:30pm

Session Chair: Vivek Sangwan,

Indian Institute of Technology

Bombay, Mumbai, India

Session Co-Chair: Kiwon Sohn,

University of Hartford, West

Hartford, CT, United States

3:45pm – Development of Lower Body for Vehicle Driving

Robot, HART

Technical Paper Publication. IMECE2018-86470

Kiwon Sohn, Mark Markiewicz, Stefan Keilich,

University of

Hartford, West Hartford, CT, United States

4:06pm – An Accurate On-Line Correction Strategy for

Gravity Compensation Aiming at Teaching by Touch of

Collaborative Robots

Technical Paper Publication. IMECE2018-86649

Yunfei Dong, Tianyu Ren, Dan Wu, Ken Chen,

Tsinghua

University, Beijing, Beijing, China

4:27pm – Optimal Mechatronic Design of a Quadruped

Robot With Compliant Legs

Technical Paper Publication. IMECE2018-88055

Jaime Arcos-Legarda, Khunsa Hisham,

Indiana University-

Purdue University Indianapolis, Indianapolis, IN, United States,

Sohel Anwar,

Indiana University-Purdue University

Indianapolis, Carmel, IN, United States,

Andres Tovar,

Indiana

University-Purdue University Indianapolis, Indianapolis, IN,

United States

4:48pm – Paper-Based Robotic Systems With Stackable

Inﬂatable Actuators

Technical Presentation. IMECE2018-89611

Xiyue Zou, Michael Yang, Cora LoPresti,

Rutgers, The State

University of New Jersey, Piscataway, NJ, United States,

Smit Shukla,

Birla Institute of Technology, Mesra, India,

Tongfen Liang,

Rutgers, The State University of New Jersey,

Piscataway, NJ, United States,

Meriem Akin, Braunschweig

University of Technology, Braunschweig, Germany,

Aaron Mazzeo,

Rutgers, The State University of New Jersey,

Piscataway, NJ, United States

5:09pm – Study of Symmetric Solutions of an

Underactuated Bipedal Robot

Technical Paper Publication. IMECE2018-87723

Prachi Shah, Vivek Sangwan,

Indian Institute of Technology

Bombay, Mumbai, Maharashtra, India

6-8 SMART STRUCTURES AND

STRUCTRONIC SYSTEMS: SENSING,

ENERGY GENERATION AND CONTROL

6-8-2 Energy Harvesting and Transducers

Third Floor, David L. Lawrence Convention Center, Room 309

3:45pm–5:30pm

Session Chair: Hornsen (HS) Tzou,

Nanjing University of

Aeronautics and Astronautics, Nanjing, Jiangsu, China

3:45pm – Multi-Stable Magnetic Spring-Based Energy

Harvester Subject to Harmonic Excitation: Comparative

Study and Experimental Evaluation

Technical Paper Publication. IMECE2018-86157

Hieu Nguyen, Hamzeh Bardaweel,

Louisiana Tech University,

Ruston, LA, United States

4:06pm – Study on Motor-Driven Gyroscopic Generator:

Part 1 — Characteristics at Constant Velocity

Technical Paper Publication. IMECE2018-86390

Hiroshi Hosaka, Yoshinori Oonishi, Yuki Tajima,

University of

Tokyo, Kashiwa-City, Chiba, Japan,

Akira Yamashita,

Seigi

Kanagata Co., Ltd., Shiroi-City, Chiba Prefecture, Japan

4:27pm – Study on Motor-Driven Gyroscopic Generator:

Part 2 — Self-Acceleration by Power Feedback

Technical Paper Publication. IMECE2018-86444

Yuki Tajima, Yoshinori Oonishi, Hiroshi Hosaka,

University of

Tokyo, Kashiwa-City, Chiba, Japan

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

MONDAY, NOVEMBER 

4:48pm – Energy Partition of Coupled and High Frequency

Vibrations of Quartz Crystal Plates

Technical Presentation. IMECE2018-88333

Qi Huang, Rongxing Wu, Longtao Xie,

Ningbo University,

Ningbo, Zhejiang, China,

Guoliang Huang,

University of

Missouri, Columbia, MO, United States,

Jianke Du, Ji Wang,

Ningbo University, Ningbo, Zhejiang, China

5:09pm – Control-Based Power Ampliﬁcation in

Thermoacoustic-Piezoelectric Energy Harvesting Devices

Technical Presentation. IMECE2018-88125

Jesse Callanan, Mostafa Nouh,

University at Buffalo, State

University of New York, Buffalo, NY, United States

6-9 NOVEL CONTROL OF DYNAMIC

SYSTEM AND

6-9-2 Novel Control of Dynamic System II

Third Floor, David L. Lawrence Convention Center, Room 310

3:45pm–5:30pm

Session Chair: C. Steve Suh,

Texas A&M University, College

Station, TX, United States

3:45pm – Periodic Motions in a First-Order, Time-Delayed,

Nonlinear System

Technical Paper Publication. IMECE2018-86824

Siyuan Xing, Albert Luo,

Southern Illinois University

Edwardsville, Edwardsville, IL, United States

4:06pm – Periodic Motions in a Van Der Pol Oscillator

Technical Paper Publication. IMECE2018-86842

Yeyin Xu, Albert Luo,

Southern Illinois University Edwardsville,

Edwardsville, IL, United States

4:27pm – Period Motions and Stability in a Nonlinear Spring

Pendulum

Technical Paper Publication. IMECE2018-86862

lbert Luo, Yaoguang Yuan,

Southern Illinois University

Edwardsville, Edwardsville, IL, United States

4:48pm – On the Temporal Network Analysis With Link

Prediction

Technical Paper Publication. IMECE2018-88101

Bin Wu, C. Steve Suh,

Texas A&M University, College Station,

TX, United States

5:09pm – Low Cost Robotic Arm Manipulator Controller

With Single Stage Fluid Valves

Technical Paper Publication. IMECE2018-88435

Claudio Campana, Akin Tatoglu,

University of Hartford, West

Hartford, CT, United States

6-11 VIBRATIONS OF CONTINUOUS

SYSTEMS

6-11-2 Vibrations of Continuous Systems II

Third Floor, David L. Lawrence Convention Center, Room 311

3:45pm–5:30pm

Session Chair: Ibrahim F. Gebrel,

University of Western

Ontario, London, ON, Canada

Session Co-ChairS: Aman Kumar,

Indian Institute of

Technology Kharagpur, Khargapur, India,

Mustapha Fofana,

Worcester Polytechnic Institute, Worcester, MA, United States

3:45pm – Dynamic Analysis and Design of a Novel Ring-

Based Vibratory Energy Harvester

Technical Paper Publication. IMECE2018-87164

Ibrahim F. Gebrel,

University of Western Ontario, London, ON,

Canada,

Ligang Wang,

Harbin Engineering University, Harbin,

Heilongjiang, China,

Samuel Asokanthan,

University of

Western Ontario, London, ON, Canada

4:06pm – Modal Identiﬁcation and Nonlinear Vibration of

Flexible Manipulator With Revolute Pair Incorporating

Generic Payload

Technical Paper Publication. IMECE2018-88527

Pravesh Kumar, Barun Pratiher,

Indian Institute of Technology

Jodhpur, Jodhpur, Rajasthan, India

4:27pm – Evaluation of Vibration Performance of Overhead

Line Conductor and Insulator String for 800 KV HVDC

System

Technical Presentation. IMECE2018-86105

Gnanavel B.K.,

Saveetha Engineering College, Chennai,

Tamilnadu, India,

Anantha Babu M.D.,

Vibration Laboratory

Mechanical Engineering Division, Bangalore, Karnataka, India,

Raja Rajeswari N., Lakshmanan Singaram,

Saveetha

Engineering College, Chennai, Tamailnadu, India,

Kamesh K.,

Murugappa Polytechnic College, Chennai, Tamilnadu, India

4:48pm – Generation of Traveling Waves in Beams Using

Search Based Optimization

Technical Presentation. IMECE2018-88719

Aman Kumar, Anirvan Dasgupta,

Indian Institute of

Technology Kharagpur, Khargapur, India

5:09pm – Impact Vibration Analysis of a Continuous System

Colliding With Elastic Bodies at an Arbitrary Position

Technical Presentation. IMECE2018-88742

Yuji Suzuki, Tatsuhito Aihara,

Hosei University, Tokyo, Tokyo,

Japan

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

MONDAY, NOVEMBER 

TUESDAY, NOVEMBER 13

6-1 PLENARY PRESENTATIONS

6-1-1 Dynamics, Vibration, and Control Plenary

Third Floor, David L. Lawrence Convention Center, Room 303

8:00am–8:45am

8:00am – Complex Modal Decomposition for Traveling

Waves and Nonsynchronous Oscillations

Plenary Presentation. IMECE2018-90097

Brian Feeny,

Michigan State University, East Lansing, MI,

United States

6-4 DESIGN AND CONTROL OF ROBOTS,

MECHANISMS, AND STRUCTURES

6-4-4 Robot Design II

Third Floor, David L. Lawrence Convention Center, Room 307

10:00am–11:45am

Session Chair: He Shen,

California State University,

Los Angeles, Los Angeles, CA, United States

Session Co-Chair: Kiwon Sohn,

University of Hartford,

West Hartford, CT, United States

10:00am – Service Robot Design for Uses in Human

Centered Environments

Technical Paper Publication. IMECE2018-86479

Kiwon Sohn, Ethan Morris, Obioma Ulebor, Thomas Currier,

Shaun Merrill,

University of Hartford, West Hartford, CT,

United States

10:21am – Motion Planning for Handspring Maneuver Using

a Two Link Robot

Technical Paper Publication. IMECE2018-87809

Raunaq Bhirangi, Vivek Sangwan,

Indian Institute of

Technology Bombay, Mumbai, Maharashtra, India

10:42am – Low Cost Optical Mechanical System for Human

Robot Interaction

Technical Paper Publication. IMECE2018-87885

Yulai Weng, Andrew Specian, Mark Yim,

University of

Pennsylvania, Philadelphia, PA, United States

11:03am – Enhancing the Path Planning Generation of a

Five DOF Manipulator Using Low-Cost Camera-Laser

Triangulation Technique

Technical Paper Publication. IMECE2018-88144

Ahmed Y. AbdelHamid,

Military Technical College, Cairo,

Egypt,

Maged M. Abou Elyazed,

Technical Research Center,

Cairo, Egypt,

Mohamed H. Mabrouk, Mootaz E. Abo Elnor,

Military Technical College, Cairo, Egypt

11:24am – Development and Analysis of Robotic Arms for

Humanoid Melo

Technical Paper Publication. IMECE2018-87987

He Shen,

California State University, Los Angeles, Los

Angeles, CA, United States,

Salvador Rojas,

California State

University, Los Angeles, Whittier, CA, United States,

Eduardo

Molina, Francisco Moxo Galicia, Ni Li,

California State

University, Los Angeles, Los Angeles, CA, United States

6-5 FLUID-STRUCTURE INTERACTION

6-5-1 Fluid-Structure Interaction I

Third Floor, David L. Lawrence Convention Center, Room 310

10:00am–11:45am

Session Chair: Marco Amabili,

McGill University, Montreal,

QC, Canada

10:00am – Developing an Advance Tire Hydroplaning Model

Using Co-Simulation of Fully Coupled FEM and CFD Codes

to Estimate Cornering Force

Technical Paper Publication. IMECE2018-86581

Ashkan Nazari,

Virginia Tech, Blacksburg, VA, United States,

Lu Chen, Francine Battaglia,

University at Buffalo, State

University of New York, Buffalo, NY, United States,

Saied

Taheri,

Virginia Tech, Blacksburg, VA, United States

10:21am – Experimental and CFD Investigation of

Aerodynamic Forces and Moments in a Linear Turbine

Blade Cascade

Technical Paper Publication. IMECE2018-86667

Vaclav Slama,

Doosan Skoda Power, Pilsen, Czech Republic,

Jiri Ira,

NUM Solution s.r.o., Prague, Czech Republic,

Petr Eret,

University of West Bohemia, Pilsen, Czech Republic,

Bartolomej Rudas,

Doosan Skoda Power, Pilsen, Czech

Republic,

Ales Macalka,

NUM Solution, Prague, Czech

Republic,

Volodymyr Tsymbalyuk,

University of West

Bohemia, Pilsen, Czech Republic

10:42am – Effect of Speed on the Performance

Characteristics of Non-Recessed Worn Hybrid Conical

Journal Bearing for Different Semi Cone Angles

Technical Paper Publication. IMECE2018-87734

Sanjay Pawar, Vikas Phalle, Sangram Patil, Veermata

Jijabai Technologicacl Institute, Mumbai, Maharashtra, India

11:03am – Experiments on Nonlinear Vibrations of a

Nuclear Fuel Rod in Air and in Water

Technical Presentation. IMECE2018-88755

Marco Amabili, Prabakaran Balasubramanian,

Giovanni Ferrari,

McGill University, Montreal, QC, Canada,

Kostas Karazis,

Framatome, Lychburg, VA, United States,

Brian Painter,

Framatome Ltd., Lychburg, VA, United States

11:24am – A Numerical Study of VIV Suppression Using a

Rotative Non-Linear Vibration Absorber (NVA) and a Wake-

Oscillator Model

Technical Presentation. IMECE2018-88767

Tatiana Ueno,

University of São Paulo, Lins, São Paulo, Brazil,

Guilherme Franzini,

University of São Paulo, São Paulo, São

Paulo, Brazil

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

TUESDAY, NOVEMBER 

6-6 VIBRATION, NOISE CONTROL AND

DAMPING TECHNOLOGIES

6-6-1 Vibration, Noise Control and Damping

Technologies I

Third Floor, David L. Lawrence Convention Center, Room 308

10:00am–11:45am

Session Chair: Robley G. Kirk,

Virginia Tech, Christiansburg,

VA, United States

10:00am – Maxwell-Voigt and Voigt Models for Vibration

Isolation: Inﬂuence of Fractional Damping and Time Delay

Technical Paper Publication. IMECE2018-86089

Sudhir Kaul,

Western Carolina University, Cullowhee, NC,

United States

10:21am – A Vertical Seismometer With Build-in

Retroreﬂector for Absolute Gravimetry

Technical Paper Publication. IMECE2018-86136

Meiying Guo, Kang Wu, Jiamin Yao, Jin Qian, Lijun Wang,

Tsinghua University, Beijing, China

10:42am – Improved Design Tool for Thermal Synchronous

Instability

Technical Paper Publication. IMECE2018-86142

Robley G. Kirk,

Virginia Tech, Christiansburg, VA, United

States,

Wen Jeng Chen,

Eigen Technologies, Inc., Davidson,

NC, United States

11:03am – An Energy-Regenerative Suspension System

Technical Paper Publication. IMECE2018-86143

Thomas Lato,

University of Ontario Institute of Technology,

Oshawa, ON, Canada,

Huiyong Zhao,

Hubei University of

Automotive Technology, Shiyan, Hubei Province, China,

Lin Zhao, Yuping He,

University of Ontario Institute of

Technology, Oshawa, ON, Canada

11:24am – Energy Absorption Mechanisms and Crash

Analysis of Helicopter Seats

Technical Paper Publication. IMECE2018-86220

Gulce Ozturk,

Turkish Aerospace Industries, Ankara, Ankara,

Turkey,

Altan Kayran,

METU Center for Wind Energy, Ankara,

Turkey

6-7 DYNAMICS AND CONTROL IN

MICRO/NANO ENGINEERING

6-7-1 Dynamics and Control in Micro/Nano

Engineering I

Third Floor, David L. Lawrence Convention Center, Room 309

10:00am–11:45am

Session Chair: Dumitru Caruntu,

University of Texas

Rio Grande Valley, Edinburg, TX, United States

Session Co-Chairs: Marco Amabili,

McGill University,

Montreal, QC, Canada,

Saad Ilyas,

King Abdullah University

of Science & Tech, Thuwal, Saudi Arabia

10:00am – Bouncing Dynamics of Cantilever-Type NEM

Switches Considering Tip-Substrate Contact

Technical Paper Publication. IMECE2018-87124

Mohamed Bognash, Samuel Asokanthan,

University of

Western Ontario, London, ON, Canada

10:21am – Evaluation of Tribological Properties of

Graphene Oxide Dispersed Liquid Parafﬁn Oil

Technical Paper Publication. IMECE2018-87346

Bhavyanidhi Vats, Monika Singh,

Moradabad Institute of

Technology, Moradabad, India,

Anuj Gupta,

Gautam Budddha

University, Delhi, Delhi, India

10:42am – Frequency Response for MEMS Circular Plate

Resonators Under Superharmonic Resonance of the

Second Order

Technical Paper Publication. IMECE2018-87823

Martin Botello, Julio Beatriz, Dumitru Caruntu,

University

of Texas Rio Grande Valley, Edinburg, TX, United States

11:03am – Investigating Simulteneous Excitation of Primary

and Subharmonic Resonance on a Doubly Clamped Mems

Microbeam

Technical Presentation. IMECE2018-88976

Saad Ilyas, Feras Alfosail, Mohammad Younis,

King

Abdullah University of Science & Tech, Thuwal, Saudi Arabia

11:24am – Analytical Study of Vibratory Transport Under

Spatially Asymmetric Motion

Technical Presentation. IMECE2018-88707

Jyayasi Nath, Anirvan Dasgupta,

Indian Institute of

Technology Kharagpur, Khargapur, India

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

TUESDAY, NOVEMBER 

6-10 MULTIBODY DYNAMIC SYSTEMS AND

APPLICATIONS

6-10-1 Multibody Dynamic Systems and

Applications I

Third Floor, David L. Lawrence Convention Center, Room 306

10:00am–11:45am

Session Chair: Shanzhong (Shawn) Duan,

Saint Martin’s

University, Lacey, WA, United States

10:00am – A New Approach for Locating the Instantaneous

Centers of Zero Velocity for 1-DOF Planar Linkages

Technical Paper Publication. IMECE2018-86341

Nadim Diab,

Rak Hariri University, Mount Lebanon, Lebanon

10:21am – Identiﬁcation of Vehicle Inertia Parameters:

From Test Bench Design to Movement Trajectory

Optimization

Technical Paper Publication. IMECE2018-87545

Di Yao, Kay Büttner, Günther Prokop,

Dresden University of

Technology, Dresden, Germany

10:42am – Vibration Suppression in Two-Dimensional

Oscillation Dynamical Systems

Technical Paper Publication. IMECE2018-87858

Adnan S. Saeed, Mohammad Al-Shudeifat,

Khalifa

University, Abu Dhabi, Abu Dhabi, United Arab Emir.

11:03am – Multibody Dynamics Approaches for Study on

Good and Bad Whole-Body Vibrations

Technical Paper Publication. IMECE2018-88485

Shanzhong (Sh

awn) Duan,

Saint Martin’s University, Lacey,

WA, United States

11:24am – Real-Time Simulation of Flexible Multibody

Models in Real-Time

Technical Presentation. IMECE2018-89504

William Prescott,

Siemens Product Lifecycle Management,

Coralville, IA, United States

6-3 NONLINEAR DYNAMICS, CONTROL,

AND STOCHASTIC MECHANICS

6-3-1 Nonlinear Dynamics, Control, and Stochastic

Mechanics I

Third Floor, David L. Lawrence Convention Center, Room 309

1:45pm–3:30pm

Session Chair: Dumitru Caruntu,

University of Texas

Rio Grande Valley, Edinburg, TX, United States

Session Co-ChairS: Marco Amabili,

McGill University,

Montreal, QC, Canada,

Bogdan Epureanu,

University of

Michigan, Ann Arbor, MI, United States

1:45pm – Design and Development of an Unmanned

Underwater Vehicle (UUV) in the Form of a Cuttleﬁsh

Technical Paper Publication. IMECE2018-86530

Susheelkumar Cherangara Subramanian, Thao Le, Jason

Olson, Sandesh G. Bhat, Sangram Redkar,

Arizona State

University, Mesa, AZ, United States

2:06pm – Modal Damping and Frequency Variations in

Nonlinearly Coupled Oscillators With Negative Linear

Stiffness Components

Technical Paper Publication. IMECE2018-87474

Fatima Alhammadi, Mohammad Al-Shudeifat,

Khalifa

University of Science and Technology, Abu Dhabi, Abu Dhabi,

United Arab Emir.

2:27pm – Nonlinear Damping in Nonlinear Vibrations

Technical Presentation. IMECE2018-87718

Marco Amabili,

McGill University, Montreal, QC, Canada

2:48pm – Voltage Response of Circular Plate MEMS

Resonators Under Superharmonic Resonance

Technical Paper Publication. IMECE2018-87766

Martin Botello, Julio Beatriz, Dumitru Caruntu,

University of

Texas Rio Grande Valley, Edinburg, TX, United States

3:09pm – Dynamic Model and Control Design for a

Nonlinear Hydraulic Actuator

Technical Paper Publication. IMECE2018-88320

Carlos Borrás Pinilla, José L. Sarmiento, Juan F. Ortíz,

Universidad Industrial de Santander, Bucaramanga, Colombia

6-4 DESIGN AND CONTROL OF ROBOTS,

MECHANISMS AND STRUCTURES

6-4-5 Mechanism Design I

Third Floor, David L. Lawrence Convention Center, Room 307

1:45pm–3:30pm

Session Chair: Yin-ping Chang,

Oakland University, Rochester,

MI, United States

Session Co-Chair: Sebastian Roa Prada,

Universidad

Autonoma de Bucaramanga, Bucaramanga, Santander,

Colombia

1:45pm – Improving Motion Stability of the Plane 3-RPR

Parallel Manipulator at Singular Conﬁguration

Technical Paper Publication. IMECE2018-86218

Yu-Tong Li, Yuxin Wang,

China University of Petroleum,

Huadong, Qingdao, Shandong, China

2:06pm – Computational Design of a Bird-Inspired Perching

Landing Gear Mechanism

Technical Paper Publication. IMECE2018-86615

Paul Nadan, Christopher Lee,

Frankln W. Olin College of

Engineering, Needham, MA, United States

2:27pm – Motion Capture of the Selective Hand Picking

Movements as the Basis for the Design of Mechanically

Assisted Picking Tools in Coffee Plantations in Colombia

Technical Paper Publication. IMECE2018-88428

Jeyson Andres Hernandez Barbosa, Sebastian Roa Prada,

Dario J. Hernandez Bolivar, Brajan Nicolas Ruiz Romero,

Oscar E. Rueda,

Universidad Autonoma de Bucaramanga,

Bucaramanga, Santander, Colombia

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

TUESDAY, NOVEMBER 

2:48pm – Design and Construct a Portable, Low Cost,

Ankle Foot Rehabilitation Device

Technical Presentation. IMECE2018-89433

Ahmad Alshorman,

Jordan University of Science and

Technology, Irbid, Jordan

3:09pm – The Virtual Cam: Hexagon Method Authentication

on Locating Key Instant Centers of All Planar Single Degree

of Freedom Kinematically Indeterminate Linkages up to

Ten-Bar

Technical Paper Publication. IMECE2018-87802

Zhengqi Liu,

FCA, Rochester, MI, United States,

Yin-ping

Chang,

Oakland University, Rochester, MI, United States

6-5 FLUID-STRUCTURE INTERACTION

6-5-2 Fluid-Structure Interaction II

Third Floor, David L. Lawrence Convention Center, Room 310

1:45pm–3:30pm

Session Chair: Marco Amabili,

McGill University, Montreal,

QC, Canada

1:45pm – Aerodynamics Analysis for Optimization the

Design of a Baja SAE Chassis

Technical Paper Publication. IMECE2018-88027

Jessica Gissella Maradey Lazaro, Sergio Andrés Ardila

Gómez, Helio Sneyder Esteban Villegas,

Universidad

Autonóma de Bucaramanga, Bucaramanga, Colombia

2:06pm – Active Control of a Two-Dimensional Nonlinear

Wing Encountering a Gust

Technical Paper Publication. IMECE2018-88456

Xiaoyang Zhang, Mojtaba Kheiri, Wen-Fang Xie,

Concordia

University, Montreal, QC, Canada

2:27pm – Investigation of Temperature Effect on Cracked

Pressurized Pipes

Technical Paper Publication. IMECE2018-88572

Karim Egab,

University of Mazaya, Nassiriyah, Nassiriyah,

Iraq,

Saad Oudah, Yeasin Bhuiyan,

University of South

Carolina, Columbia, SC, United States,

Ameen Nassar,

University of Basrah, Basrah, Iraq,

H.R. Hassan,

Mazaya

University, Thiqar, Iraq

2:48pm – 2 DOF Vortex-Induced Vibration Response and

Energy Harvesting of Slender Marine Structures

Technical Presentation. IMECE2018-89060

Jing Xu, Menglan Duan, Yingying Wang,

China University of

Petroleum (Beijing), Beijing, China

3:09pm – Research Efforts on Aeroelasticity Effects in

Airborne Diesel Engine Turbochargers

Technical Presentation. IMECE2018-89589

Ryan C. McGowan, Muthuvel Murugan, Michael T.

Szedlmayer, Kenneth S. Kim, Kurt M. Kruger, David J.

Gondol, Chol-Bum M. Kweon,

U.S. Army Research

Laboratory, Aberdeen Proving Ground, MD, United States,

Peter J. Clerkin,

Environmental Research Group, Aberdeen

Proving Ground, MD, United States,

Rik D. Meininger,

Science

Applications International Corporation, Redstone Arsenal, AL,

United States,

Joseph A. Gibson, Khanh Q. Dang,

Christopher A. Lindsey, Bernard N. Acker,

U.S. Army

Aviation and Missile Research, Development, and Engineering

Center, Redstone Arsenal, AL, United States,

Marshall R.

Musser,

Sigmatech, Inc., Huntsville, AL, United States

6-6 VIBRATION, NOISE CONTROL AND

DAMPING TECHNOLOGIES

6-6-2 Vibration, Noise Control and Damping

Technologies II

Third Floor, David L. Lawrence Convention Center, Room 308

1:45pm–3:30pm

Session Chair: Akintoye O. Oyelade,

University of Lagos,

Lagos, Nigeria

1:45pm – Energy Harvesting From a Vehicle Damper by

Using Electromagnetic Transducers

Technical Paper Publication. IMECE2018-86774

Longhan Xie, Jiehong Li,

South China University of

Technology, Guangzhou, China

2:06pm – Rigid-Flexible Coupling Dynamic Modeling and

Simulation of Ravigneaux Compound Planetary Gear

Systems

Technical Paper Publication. IMECE2018-86787

Yigong Lv, Yanfang Liu, Junbin Lai, Peng Dong,

Beihang

University, Beijing, China

2:27pm – Frequency Domain Non-Linear Modeling and

Analysis of Liquid Filled Column Dampers

Technical Paper Publication. IMECE2018-86850

H. Sefa Kizilay, Ender Cigeroglu,

Middle East Technical

University, Ankara, Turkey

2:48pm – Vibration Prediction of Horizontal Axis Washing

Machine Through FEA on Wooden and Concrete Floor

Technical Paper Publication. IMECE2018-87001

Sachin Nilawar, Vasudeo Patil, Sushilkumar Vishwakarma,

Whirlpool of India Ltd., Pune, Maharashtra, India

3:09pm – Numerical and Analytical Analyses of Bi-Stable

Element as Negative Stiffness

Technical Paper Publication. IMECE2018-87175

Akintoye O. Oyelade,

University of Lagos, Lagos, Nigeria

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

TUESDAY, NOVEMBER 

6-10 MULTIBODY DYNAMIC SYSTEMS AND

APPLICATIONS

6-10-2 Multibody Dynamic Systems and

Applications II

Third Floor, David L. Lawrence Convention Center, Room 306

1:45pm–3:30pm

Session Chair: Shanzhong (shawn) Duan,

Saint Martin’s

University, Lacey, WA, United States

1:45pm – Modeling Stablization of Crane and Ship by

Gyroscopic Control Using the Moving Frame Method

Technical Paper Publication. IMECE2018-86165

Josef Flatlandsmo, Torbjoern Smith, Ørjan Ommedal

Halvorsen,

Western Norway University of Applied Sciences,

Bergen, Norway,

Johnny Vinje,

Western Norway University of

Applied Sciences, Flora, Sogn og Fjorande, Norway,

Thomas

Impelluso,

Western Norway University of Applied Sciences,

Bergen, Norway

2:06pm – Modeling Crane Induced Ship Motion Using the

Moving Frame Method

Technical Paper Publication. IMECE2018-86190

Øystein Haveland, Paulo Alexander Jacobsen Jardim, Jan

Tore Rein, Thomas Impelluso,

Western Norway University of

Applied Sciences, Bergen, Norway

2:27pm – Dynamic Comparison of a 3-Degrees-of-Freedom

Parallel Manipulator With Multiple Dry Clearance Joints

and With Lubricated Joints

Technical Paper Publication. IMECE2018-87016

Haodong Zhang, Xianmin Zhang, Xuchon

g Zhang, Zhenhui

Zhan,

South China University of Technology, Guangzhou,

China

2:48pm – A Variational Derivation of Equations of Motion

With Contact Constraints Using SE(3)

Technical Paper Publication. IMECE2018-87126

Hidenori Murakami,

University of California, San Diego, San

Diego, CA, United States,

Takeyuki Ono,

The National Defense

Academy, Yokosuka, Japan

3:09pm – Development of Equations of Motion for a

Stewart Platform Under Prescribed Mount Motion

Technical Paper Publication. IMECE2018-87253

Takeyuki Ono, Ryosuke Eto, Junya Yamakawa,

The National

Defense Academy, Yokosuka, Japan,

Hidenori Murakami,

University of California, San Diego, San Diego, CA, United

States

6-3 NONLINEAR DYNAMICS, CONTROL,

AND STOCHASTIC MECHANICS

6-3-2 Nonlinear Dynamics, Control, and Stochastic

Mechanics II

Third Floor, David L. Lawrence Convention Center, Room 309

3:45pm–5:30pm

Session Chair: Marco Amabili,

McGill University, Montreal,

QC, Canada

Session Co-Chairs: Bogdan Epureanu,

University of Michigan,

Ann Arbor, MI, United States,

Isaac Elishakoff,

Florida Atlantic

University, Boca Raton, FL, United States

3:45pm – A Time-Frequency Domain Adaptive Control

Approach for Vibration of Active Magnetic Bearing System

Technical Paper Publication. IMECE2018-86110

Xuan Yao, Zhaobo Chen,

Harbin Institute of Technology,

Harbin, Heilongjiang, China,

Xiaoxiang Liu,

Beijing Institute of

Control Engineering, Beijing, China,

Yinghou Jiao,

Harbin

Institute of Technology, Harbin, Heilongjiang, China

4:06pm – Optimal Vibration Control and Energy Scavenging

Using Collocated Nonlinear Energy Sinks and Piezoelectric

Elements

Technical Paper Publication. IMECE2018-86299

Zahra Nili Ahmadabadi,

Dana Incorporated, Maumee, OH,

United States,

Siamak Esmaeilzadeh Khadem,

Tarbiat

Modares University, Tehran, Tehran, Iran

4:27pm – Control Analysis of a 3D Self-Balancing Inverted

Pendulum and Cart System for Stability in the Event of a

Sensor Failure

Technical Paper Publication. IMECE2018-87586

Sarah Lamb,

Stanley Black & Decker, Inc., New Britain, CT,

United States,

Patricia Mellodge, Kiwon Sohn, Akin Tatoglu,

University of Hartford, West Hartford, CT, United States

4:48pm – Multidimensional Integration Methods Used for

Catastrophic Event Prediction Associated With Nonlinear

Dynamic Responses of Road Vehicles

Technical Paper Publication. IMECE2018-88009

Jesus Gonzalez Anaya, Julian Dunne,

University of Sussex,

Brighton, United Kingdom

5:09pm – Rigorous Implementation of the Galerkin Mechod

for Stepped Columns

Technical Presentation. IMECE2018-87779

Isaac Elishakoff,

Florida Atlantic University, Boca Raton, FL,

United States,

Damien Boutur,

Sigma Clermont, Aubiere,

France

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

TUESDAY, NOVEMBER 

6-4 DESIGN AND CONTROL OF ROBOTS,

MECHANISMS AND STRUCTURES

6-4-6 Mechanism Design II

Third Floor, David L. Lawrence Convention Center, Room 307

3:45pm–5:30pm

Session Chair: Hong Zhou,

Texas A&M University-Kingsville,

Kingsville, TX, United States

Session Co-Chair: Naoufel Azouz,

University of Evry, Evry-

Courcouronnes, France

3:45pm – Modeling Subsea ROV Motion Using the Moving

Frame Method

Technical Paper Publication. IMECE2018-86191

Katrine Oen Austefjord, Linn-Kristin Skeide Larsen,

Western

Norway University of Applied Sciences, Bergen, Hordaland,

Norway,

Martin Hestvik, Høgskolen på Vestlandet,

Kristiansund, MORE OG ROMSDAL, Norway,

Thomas

Impelluso,

Western Norway University of Applied Sciences,

Bergen, Norway

4:06pm – Modelling and Design of an Airship Crane

Technical Paper Publication. IMECE2018-87587

Naoufel Azouz,

University of Evry, Evry-Courcouronnes,

France,

Mahmoud Khamlia, Fida Benabdallah,

University of

Evry Paris-Saclay, Evry-Courcouronnes, France,

Fatma

Guesmi,

Polytechnic School of Tunis, La Marsa, Tunisia

4:27pm – Path Generation Algorithm Veriﬁcation of Five

DOF Robotic Arm With Linear Actuator Using MATLAB

Sim-Mechanics

Technical Paper Publication. IMECE2018-88185

Ahmed Y. AbdelHamid,

Military Technical College, Cairo,

Egypt,

Maged M. Abou Elyazed,

Technical Research Center,

Cairo, Egypt,

Abdelrahman Zaghloul,

McMaster University,

Hamilton, ON, Canada

4:48pm – Locomotion of Two-Mass Robot Using an

Impulsive actuator

Technical Presentation. IMECE2018-89432

Ahmad Alshorman,

Jordan University of Science and

Technology, Irbid, Jordan

5:09pm – Linkage Synthesis for Solar Tracking

Technical Paper Publication. IMECE2018-86471

Kavan Jani, Hong Zhou, Chung Leung,

Texas A&M

University-Kingsville, Kingsville, TX, United States

6-6 VIBRATION, NOISE CONTROL AND

DAMPING TECHNOLOGIES

6-6-3 Vibration, Noise Control and Damping

Technologies III

Third Floor, David L. Lawrence Convention Center, Room 308

3:45pm–5:30pm

Session Chair: Ashok Belegundu,

Pennsylvania State

University, University Park, PA, United States

3:45pm – Optimized Vibration Suppression of Structural

Floor Using Passive TMD

Technical Paper Publication. IMECE2018-87488

Zaman Chini, Haifeng Zhang,

University of North Texas,

Denton, TX, United States

4:00pm – Vibration Analysis of Washing Machines in

Rotating Plane of Drum

Technical Paper Publication. IMECE2018-88632

Cem Baykal, Ender Cigeroglu, Yigit Yazicioglu,

Middle East

Technical University, Ankara, Turkey

4:15pm – Optimal Design of a Segmented Tube With Side

Branches for Noise Reduction

Technical Paper Publication. IMECE2018-88691

Ashok Belegundu,

Pennsylvania State University, University

Park, PA, United States,

Michael Grissom,

Soundless, LLC,

State College, PA, United States

4:30pm – Quenching of Friction Induced Vibration by

Tangential Acceleration Feedback Control

Technical Presentation. IMECE2018-88894

Jyayasi Nath,

IIT Kharagpur, Kharagpur, India,

Shyamal

Chatterjee,

IIEST SHIBPUR, Howrah, India

4:45pm – Theoretical Model for Vibration Reduction in

Human Body-Wheelchair System

Technical Presentation. IMECE2018-89523

Akihiro Yamamoto, Shinichiro Ota

Okayama Prefectural

University, Souja, Okayama, Japan

5:00pm – Dynamic Analysis Rectangular Aluminium Plate

Under Transverse Loading Using Finite Difference

Algorithm

Technical Paper Publication. IMECE2018-86198

Michael Agarana,

Covenant University., Ota, Ogun State,

Nigeria,

Esther Akinlabi,

University of Johannesburg,

Johannesburg, Gauteng Province, South Africa

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

TUESDAY, NOVEMBER 

6-10 MULTIBODY DYNAMIC SYSTEMS AND

APPLICATIONS

6-10-3 Multibody Dynamic Systems and

Applications III

Third Floor, David L. Lawrence Convention Center, Room 306

3:45pm–5:30pm

Session Chair: Shanzhong (Shawn) Duan,

Saint Martin’s

University, Lacey, WA, United States

Session Co-Chair: Isaac Elishakoff,

Florida Atlantic University,

Boca Raton, FL, United States

3:45pm – Steering Strategy for a Multi-Axle Wheeled

Vehicles

Technical Paper Publication. IMECE2018-86323

Waqar Ahmed, Sana Fatima, Raja Amer Azim,

National

University of Sciences and Technology, Islamabad, Pakistan

4:06pm – Finite Element Analysis of Contact Force Models

During Solid Elastic and Plastic Bodies Impact

Technical Paper Publication. IMECE2018-87458

Gustavo Rodrigues,

Universidade Estácio de Sá, Rio de

Janeiro, Brazil,

Hans Weber,

Pontical Catholic University of

Rio de Janeiro, Rio de Janeiro, RJ, Brazil,

Larissa Driemeier,

University of São Paulo, São Paulo, Brazil

4:27pm – Topology Optimization of an Anti Roll Bar of a

Heavy Commercial Truck for Vehicle Dynamics and

Durability

Technical Paper Publication. IMECE2018-87862

Ece Yenilmez, Ali Yasar, Polat Sendur,

Ozyegin University,

Cekmekoy, Istanbul, Turkey

4:48pm – Design Optimization and Dynamic Analysis of

Elliptical Cross-Section Helical Spring

Technical Presentation. IMECE2018-89537

Majdi Gzal, Oleg Gendelman,

Technion, Israel Institute of

Technology, Haifa, Israel

5:09pm – Uncertainty Quantiﬁcation of Edwards High-

Pressure Pipe Behavior Using Complex System

Thermal-Hydraulics Codes

Technical Paper Publication. IMECE2018-88053

Mojtaba Raheli Kaleibar,

Sahand University of Technology,

Tabriz, East Azarbaijan, Iran,

Mohammad Pourgol-

Mohammad,

JCI/Sahand University of Technology, York, PA,

United States,

Rahim Khoshbakhti Saray,

Sahand University

of Technology, Tabriz, East Azarbaijan, Iran,

Seyed Mohsen

Hoseyni,

KTH Royal Institute of Technology, Stokholm,

Sweden

6-11 VIBRATIONS OF CONTINUOUS

SYSTEMS

6-11-1 Vibrations of Continuous Systems I

Third Floor, David L. Lawrence Convention Center, Room 310

3:45pm–5:30pm

Session Chair: Dumitru Caruntu,

University of Texas

Rio Grande Valley, Edinburg, TX, United States

Session Co-Chairs: Marco Amabili,

McGill University,

Montreal, QC, Canada,

Berkan Alanbay,

Virginia Tech,

Blacksburg, VA, United States

3:45pm – Vibration of Curvilinearly Stiffened Plates Using

Ritz Method With Orthogonal Jacobi Polynomials

Technical Paper Publication. IMECE2018-86871

Berkan Alanbay, Karanpreet Singh, Rakesh Kapania,

Virginia Tech, Blacksburg, VA, United States

4:06pm – Dynamic Analysis and Parametric Excitation of a

Multi-Span Beam Structure Coupled With a Sequence of

Moving Rigid Bodies

Technical Paper Publication. IMECE2018-87181

Hao Gao, Bingen (Ben) Yang,

University of Southern

California, Los Angeles, CA, United States

4:27pm – Parametric Instability of Planetary Gear

Transmission Mounted on Discrete Support Struts With

Minimum Ring Gear Rim Thickness Design

Technical Paper Publication. IMECE2018-87220

Peng Guan,

University of Tennessee, Dublin, OH, United

States,

Hans Desmidt,

University of Tennessee, Knoxville, TN,

United States

4:48pm – Parametric Resonance of Electrostatically

Actuated MEMS Cantilever Resonators: Homotopy

Analysis Method Versus the Method of Multiple Scales

Technical Paper Publication. IMECE2018-88015

Dumitru Caruntu, Christopher Reyes,

University of Texas

Rio Grande Valley, Edinburg, TX, United States

5:09pm – A Simple Spring-Loaded Inverted Pendulum (Slip)

Model of a Bio-Inspired Quadrupedal Robot Over

Compliant Terrains

Technical Paper Publication. IMECE2018-87134

Hasti Hayati, Paul Walker, Terry Brown, Paul Kennedy,

David Eager

University of Technology Sydney, Sydney, NSW,

Australia

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

TUESDAY, NOVEMBER 

6-20 CONGRESS-WIDE SYMPOSIUM ON

NDE & SHM: DYNAMICS, VIBRATION, AND

CONTROL FOR STRUCTURAL HEALTH

MONITORING APPLICATIONS

6-20-1 Dynamics, Vibration, and Control for

Structural Health Monitoring Applications I

Third Floor, David L. Lawrence Convention Center, Room 305

3:45pm–5:30pm

Session Chair: Andrei Zagrai,

New Mexico Institute of Mining

& Technology, Socorro, NM, United States

3:45pm – Interfacial Strength Evaluation of Surface

Coatings by Using Repeated Pulsed Laser Irradiations

Technical Presentation. IMECE2018-86494

Takeshi Yamada, Yusaku Saito, Kohei Kanamori,

Akio Yonezu,

Chuo University, Tokyo, Japan

4:06pm – A Phase Spectrum Method for the Measurement

of Liquid-Layer Thickness

Technical Paper Publication. IMECE2018-87201

Wenbin Huang, Quanchang Li, Junkai Ding,

Chongqing

University, Chongqing, China

4:27pm – Negative Effective Stiffness Content in Cracked

Rotors

Technical Paper Publication. IMECE2018-87470

Mohammad Al-Shudeifat, Fatima Alhammadi, Khalifa

University of Science and Technology, Abu Dhabi, Abu Dhabi,

United Arab Emir.

4:48pm – Electromechanical-Resonance-Based Self-

Sensing in Metal-Cement Structures

Technical Presentation. IMECE2018-88325

ong Liang, Deborah D.L. Chung,

University at Buffalo,

State University of New York, Buffalo, NY, United States

5:09pm – Application of Electromechanical Impedance

Method to Structural Health Monitoring of Composite

Elements of Aerospace Structures

Technical Presentation. IMECE2018-89507

Aaron Misla, Andrei Zagrai,

New Mexico Institute of Mining &

Technology, Socorro, NM, United States

TRACK  DYNAMICS, VIBRATION, AND CONTROL

–

TUESDAY, NOVEMBER 

NOTES

7-1-1: Curriculum Innovations, Pedagogy and Learning Methodologies – I

7-1-2; Curriculum Innovations, Pedagogy and Learning Methodologies – II

7-2-1: Globalization of Engineering

7-3-1: Engineering Accreditation, Data Collection, Assessment and ABET

Session I

7-3-2: Engineering Accreditation, Data Collection, Assessment and ABET

Session II

7-4-1: Systems Engineering and Sustainable Engineering Education – I

7-4-2: Systems Engineering and Sustainable Engineering Education – II

7-5-1: Applied Mechanics, Dynamic Systems and Control Engineering – I

7-5-2: Applied Mechanics, Dynamic Systems and Control Engineering – II

7-6-1: Fluid Mechanics, Heat Transfer, Experiments and Energy Systems

7-7-1: Problem Solving in Engineering Education, Research and Practice – I

7-7-2: Problem Solving in Engineering Education, Research and Practice – II

7-8-1: Distance/Online Engineering, Models and Enabling Technologies – I

7-8-2: Distance/Online Engineering, Models and Enabling Technologies – II

7-9-1: K-12 STEM, RET- University, School and Industry Alliance, Session in

Honor of Late Professor Devdas Pai

7-10-1: Teaching Laboratories, Machine Shop Experiences and Technology-Aided

Learning

7-12-1: Engineering Research Innov

ation

Track Organizers

Subha Kumpaty,

Milwaukee School of

Engineering, United States

Mohammad Naraghi,

Manhattan College,

United States

Topic Organizers

Anabela Alves,

University of Minho,

Portugal

Amir Karimi,

University of Texas-San

Antonio, United States

Hephzibah Kumpaty,

University of

Wisconsin–Whitewater, United States

Nael Barakat,

Texas A&M Kingsville,

United States

Mohammad Mahinfalah,

Milwaukee

School of Engineering, United States

Wael Mokhtar,

Grand Valley State

University, United States

Zbigniew Bzymek,

University of

Connecticut, United States

Reza Mirshams,

University of North

Texas, United States

Emine Celik Foust,

York College of

Pennsylvania, United States

Salim Azzouz,

Midwestern State

University, United States

Session Organizers

Anabela Alves,

University of Minho,

Portugal

Salim Azzouz,

Midwestern State

University, United States

Celina P. Leao,

University of Minho,

Portugal

Subha Kumpaty,

Milwaukee School of

Engineering, United States

Amir Karimi,

University of Texas–San

Antonio, United States

Nael Barakat,

Texas A&M Kingsville,

United States

Emine Celik Foust,

York College of

Pennsylvania, United States

Mohammad Mahinfalah,

Milwaukee

School of Engineering, United States

Wael Mokhtar,

Grand Valley State

University, United States

Mohammad Naraghi,

Manhattan College,

United States

Nazmul Islam,

University of Texas

Rio Grande Valley, United States

TRACK 7 ENGINEERING EDUCATION

WEDNESDAY, NOVEMBER 14

7-13 ENGINEERING EDUCATION PLENARY

7-13-1 Engineering Education Plenary

Third Floor, David L. Lawrence Convention Center, Room 302

9:00am–9:45am

9:00am – Lessons and Perspectives on Transformational

Engineering Education: Past, Present, and Future

Plenary Presentation. IMECE2018-90098

Harvey Borovetz,

University of Pittsburgh, Pittsburgh, PA,

United States

7-2 GLOBALIZATION OF ENGINEERING

7-2-1 Globalization of Engineering

Third Floor, David L. Lawrence Convention Center, Room 317

10:00am–11:45am

Session Chair: Subha Kumpaty,

Milwaukee School of

Engineering, Milwaukee, WI, United States

10:00am – Temperature and Heat Flux Data-Logger for Use

in Tunnel Ovens: An International Partnered Project

Technical Paper Publication. IMECE2018-86076

Alexander Watt, Jason Wichert, Justine Staniszewski,

Nathaniel Nakles, Yvonne English, Mike Bright,

Grove City

College, Grove City, PA, United States,

Michel Havet,

ONIRIS,

Nantes, France,

Erik Bardy, Mark Reuber,

Grove City College,

Grove City, PA, United States

10:21am – Study on Functionally Gradient Materials Under

International Research Experiences for Undergraduates

Program: US–South Africa Collaboration

Technical Paper Publication. IMECE2018-86288

Subha Kumpaty,

Milwaukee School of Engineering,

Milwaukee, WI, United States,

Esther Akinlabi,

University of

Johannesburg, Johannesburg, South Africa,

Sisa Pityana,

Council of Scientic and Industrial Research, Pretoria, South

Africa,

Andrew Gray, Kevin Sivak,

Milwaukee School of

Engineering, Milwaukee, WI, United States,

Mutiu F. Erinosho,

University of Johannesburg, Johannesburg, South Africa

10:42am – Curricular Structure for a Mechanical

Engineering Undergrad Program Based on Human

Capabilities and Professional Competences

Technical Paper Publication. IMECE2018-88240

Diego A. Flórez,

Universidad Ponticia Bolivariana, Medellin,

Colombia

11:03am – Motivational Tools for Engineering Students in

Privileged Developing Countries: Examples From UAE

Technical Paper Publication. IMECE2018-88499

Bashar El-Khasawneh,

Khalifa University, Abu Dhabi, United

Arab Emir.

11:24am – Gender Climate and Gender Experience in

Engineering Education

Technical Presentation. IMECE2018-86385

Jan Fertig, Subha Kumpaty,

Milwaukee School of

Engineering, Milwaukee, WI, United States

7-4 SYSTEMS ENGINEERING AND

SUSTAINABLE ENGINEERING EDUCATION

7-4-1 Systems Engineering and Sustainable

Engineering Education – I

Third Floor, David L. Lawrence Convention Center, Room 318

10:00am–11:45am

Session Chair: Nael Barakat,

Texas A&M Kingsville, Kingsville,

TX, United States

10:00am – Application of Systems Engineering to Machine

Design for Technology Students

Technical Paper Publication. IMECE2018-86713

Anthony D. Angelo,

U.S. Army ARDEC, Hillsborough, NJ,

United States,

Edwin K.P. Chong,

Colorado State University,

Ft. Collins, CO, United States

10:21am – Technology on Trial: The Social Framework of

Safe Design

Technical Paper Publication. IMECE2018-87017

W.P. Munsell,

University of Oklahoma, Norman, OK, United

States

10:42am – Assessing the Educational Effectiveness of a

System Engineering Software in Capstone Design Projects

Technical Paper Publication. IMECE2018-87640

Angran Xiao,

New York City College of Technology, Yorktown

Heights, NY, United States,

Gaffar Gailani, Shaojin Zhang,

New York City College of Technology, Brooklyn, NY, United

States

11:03am – Development of a New Course on Microgrids

and Distributed Energy Resources

Technical Paper Publication. IMECE2018-88506

Sasan Haghani,

University of the District of Columbia,

Washington, DC, United States

TRACK  ENGINEERING EDUCATION

–

WEDNESDAY, NOVEMBER 

7-5 APPLIED MECHANICS, DYNAMIC

SYSTEMS AND CONTROL ENGINEERING

7-5-1 Applied Mechanics, Dynamic Systems and

Control Engineering – I

Third Floor, David L. Lawrence Convention Center, Room 316

10:00am–11:45am

Session Chair: Mohammad Mahinfalah,

Milwaukee School of

Engineering, Milwaukee, WI, United States

10:00am – Inspiring Learning: Assessment of Friction in a

Real-World Model Using the Moving Frame Method in

Dynamics

Technical Paper Publication. IMECE2018-86189

Thorstein R. Rykkje,

University of Bergen, Bergen, Hordaland,

Norway,

Erlend Bergaas,

Western Norway University of

Applied Sciences, Bergen, Norway,

Andreas Skjelde,

Høgskolen på Vestlandet, Bergen, Hordaland, Norway,

Daniel Leinebø, Thomas Impelluso,

Western Norway

University of Applied Sciences, Bergen, Norway

10:21am – Interactive Educational Testbed for Statics and

Mechanics of Materials

Technical Paper Publication. IMECE2018-87938

Zhelong He, Qingchang Liu, Katherine Yang, Niemann Pest,

Baoxing Xu, Jason Kerrigan, Marek-Jerzy Pindera,

University of Virginia, Charlottesville, VA, United States

10:42am – Developing and Implementing a Projectile

Launching Mechanism During a Senior Engineering

Capstone Project to Demonstrate Advanced Projectile

Motion Principles

Technical Presentation. IMECE2018-87173

Edward Bednarz III, Debbie A. French,

Wilkes University,

Wilkes-Barre, PA, United States

11:03am – Derivation of Rotation Matrix for Axis-Angle

Representation of Rotation Based on an Intuitive

Interpretation of Rotation Matrix to Be Taught in Robot

Kinematics Courses

Technical Presentation. IMECE2018-89645

Roshan Kumar Hota, Kumar Cheruvu,

Indian Institute of

Technology Kharagpur, Kharagpur, India

7-1 CURRICULUM INNOVATIONS,

PEDAGOGY, AND LEARNING

METHODOLOGIES

7-1-1 Curriculum Innovations, Pedagogy, and

Learning Methodologies – I

Third Floor, David L. Lawrence Convention Center, Room 317

1:45pm–3:30pm

Session Chair: Anabela Alves,

University of Minho,

Guimareves, Portugal

Session Co-Chair: Salim Azzouz,

Midwestern State University,

Wichita Falls, TX, United States

1:45pm – Traditional, Active, and Problem-Based Learning

Methods Used to Improve an Undergraduate Biomechanics

Course

Technical Paper Publication. IMECE2018-87478

Sally Shady,

Stevens Institute of Technology, Hoboken, NJ,

United States

2:06pm – User Centered Design Applied to the

Improvement of Fine Motor Skills

Technical Paper Publication. IMECE2018-88407

Carolina Castro Alarcon, Santiago Eduardo Castillo

Cadena, Daniel Haro Mendoza,

National Autonomous

University of Mexico, Mexico City, Mexico,

Alejandro

Ramirez-Reivich,

National Autonomous University of Mexico,

Distrito Federal, Mexico,

Vicente Borja Ramírez,

National

Autonomous University of Mexico, Distrito Federal, Mexico,

Arturo Treviño Arizmendi,

National Autonomous University of

Mexico, Periodista, Mexico,

Jessica Daniela Vega Bello,

National Autonomous University of Mexico, Venustiano

Carranza, Mexico,

Yesica Escalera Matamoros,

National

Autonomous University of Mexico, Coyoacan, Mexico

2:27pm – Integrating Collaborative Robots in Engineering

and Engineering Technology Programs

Technical Paper Publication. IMECE2018-88147

Ana Djuric, Jeremy Rickli,

Wayne State University, Detroit,

MI, United States,

John P. Sefcovic, Donald Hutchison,

Michael M. Goldin,

Oakland Community College, Auburn Hills,

MI, United States

2:48pm – Understanding Mathematical Deﬁnitions of

Circularity/Roundness in ASME GD&T Y14.5 As Related to

Part Functionality

Technical Paper Publication. IMECE2018-87148

Chittaranjan Sahay,

University of Hartford, Glastonbury, CT,

United States,

Suhash Ghosh,

University of Hartford, West

Hartford, CT, United States

TRACK  ENGINEERING EDUCATION

–

WEDNESDAY, NOVEMBER 

7-4 SYSTEMS ENGINEERING AND

SUSTAINABLE ENGINEERING EDUCATION

7-4-2 Systems Engineering and Sustainable

Engineering Education- II

Third Floor, David L. Lawrence Convention Center, Room 318

1:45pm–3:30pm

Session Chair: Emine Celik Foust,

York College of

Pennsylvania, York, PA, United States

1:45pm – Devices to Aid Mobility: Biomedical Engineering-

Focused Undergraduate Senior Capstone Design Projects

Technical Paper Publication. IMECE2018-86826

Lara Thompson, Jiajun Xu, Devdas Shetty,

University of the

District of Columbia, Washington DC, United States

2:06pm – Measuring the Impact of a New Mechanical

Engineering Sophomore Design Course on Students’

Systems Thinking Skills

Technical Paper Publication. IMECE2018-87624

Cassandra Degen, Karim H. Muci-Kuchler,

South Dakota

School of Mines and Technology, Rapid City, SD, United

States,

Mark Bedillion,

Carnegie Mellon University, Gibsonia,

PA, United States,

Shaobo Huang,

South Dakota School

of Mines and Technology, Rapid City, SD, United States,

Marius D. Ellingsen,

VRC Metal Systems, Rapid City, SD,

United States

2:27pm – Student Learning Projects in Sustainable Energy:

Solar-Powered Algae Culture, Photovoltaics, and CO

Capture

Technical Paper Publication. IMECE2018-88404

Michael Mauk, Richard Chiou, Carlos Ruiz, Jean Espaillat,

Senyu Wang, Ainhoa Garcia, Robert Surrette,

Drexel

University, Philadelphia, PA, United States

2:48pm – Revolutionizing Mechanical Engineering

Departments

Technical Presentation. IMECE2018-89725

Yen-Lin Han,

Seattle University, Seattle, WA, United States,

Edward Berger, Elizabeth Briody,

Purdue University, West

Lafayette, IN, United States,

Kathleen Cook, Greg Mason,

Seattle University, Seattle, WA, United States,

Edward

Morrison,

Purdue University, West Lafayette, IN, United States,

Teodora Shuman,

Seattle University, Seattle, WA, United

States,

Jennifer Turns,

University of Washington, Seattle, WA,

United States,

Elizabeth Wirtz,

Purdue University, West

Lafayette, IN, United States

7-5 APPLIED MECHANICS, DYNAMIC

SYSTEMS AND CONTROL ENGINEERING

7-5-2 Applied Mechanics, Dynamic Systems and

Control Engineering- II

Third Floor, David L. Lawrence Convention Center, Room 316

1:45pm–3:30pm

Session Chair: Mohammad Mahinfalah,

Milwaukee School of

Engineering, Milwaukee, WI, United States

1:45pm – Rattlebacks for Undergraduate Engineers:

Modelling Complex Behavior Using Introductory Dynamics

and Numerical Methods

Technical Paper Publication. IMECE2018-86580

Simon Jones, Kirby Kern,

Rose-Hulman Institute of

Technology, Terre Haute, IN, United States

2:06pm – Robotic Polishing of Free-Form Surfaces With

Controlled Force and Effective Path Planning

Technical Paper Publication. IMECE2018-87371

Imran Mohsin, Kai He,

Shenzhen Institutes of Advanced

Technology, Chinese Academy of Sciences, Shenzhen, China,

Ruxu Du,

Chinese University of Hong Kong, Hong Kong, Hong

Kong

2:27pm – A Consistent Approach to Problem Solving in

Mechanical Vibrations

Technical Paper Publication. IMECE2018-88241

Amir Danesh Yazdi, Yi Wu, Oladipo Onipede,

Penn State

University Erie, Erie, PA, United States

2:48pm – A Material Model Fitting for Recycled

Polyethylene Terephthalate Implemented in the Finite

Element Modeling

Technical Paper Publication. IMECE2018-88305

Diego Fernando Mesa Vargas,

Universidad de Guanajuato,

Salamanca, Mexico,

Agustin Vidal-Lesso,

Universidad de

Guanajuato-Dicis, Salamanca, Mexico,

Jorge Arturo Alfaro

Ayala,

Universidad de Guanajuato, Guanajuato, Guanajuato,

Mexico

TRACK  ENGINEERING EDUCATION

–

WEDNESDAY, NOVEMBER 

7-1 CURRICULUM INNOVATIONS,

PEDAGOGY AND LEARNING

METHODOLOGIES

7-1-2 Curriculum Innovations, Pedagogy and

Learning Methodologies – II

Third Floor, David L. Lawrence Convention Center, Room 317

3:45pm–5:30pm

Session Chair: Anabela Alves,

University of Minho,

Guimareves, Portugal

Session Co-Chair: Celina P. Leao,

University of Minho,

Guimaraes, Portugal

3:45pm – Dealing With the Students’ Proﬁle Diversity in an

Industrial Engineering and Management Program: PBL

versus Non-PBL

Technical Paper Publication. IMECE2018-86368

Anabela Alves, Francisco Moreira, Celina P. Leao,

University

of Minho, Guimarães, Portugal

4:06pm – Blended Learning by Gamiﬁcation in a Second-

Year Introductory Engineering Design Course

Technical Paper Publication. IMECE2018-86879

Alyona Sharunova, Ahmed Ead, Christopher Robson, Misha

Afaq, Pierre Mertiny,

University of Alberta, Edmonton, AB,

Canada

4:27pm – Effectiveness of Evidence-Based Active Learning

Pedagogies in Engineering Technology Courses

Technical Paper Publication. IMECE2018-87656

Mohsen Ayoobi, Mukasa Ssemakula, Ana Djuric,

Wayne

State University, Detroit, MI, United States

4:48pm – A Reﬂection of a Pedagogic Approach in an

Engineering Course

Technical Paper Publication. IMECE2018-88538

Manuel Eduardo Ferreira,

University of Minho, Guimarães,

Portugal,

Joao Ferreira,

Metrics, Guimarães, Portugal,

Celina P. Leao,

University of Minho, Guimarães, Portugal

5:09pm – Development of a Hybrid Heat and Mass Transfer

Course

Technical Paper Publication. IMECE2018-87934

Julie Mendez,

Indiana University-Purdue University Columbus,

Columbus, IN, United States

7-9 PRE-COLLEGE (K-12) STEM, RET—

UNIVERSITY, SCHOOL AND INDUSTRY

ALLIANCE (IN HONOR OF LATE

PROFESSOR DEVDAS PAI)

7-9-1 K-12 STEM, RET—University, School and

Industry Alliance, Session in Honor of Late Professor

Devdas Pai

Third Floor, David L. Lawrence Convention Center, Room 318

3:45pm–5:30pm

Session Chair: Subha Kumpaty,

Milwaukee School of

Engineering, Milwaukee, WI, United States

3:45pm – Development of a Multidisciplinary Engineering

Research Program for Middle/High School Teachers

Technical Paper Publication. IMECE2018-86411

Wen Li, Joshua Kim, Drew Kim,

Michigan State University,

East Lansing, MI, United States,

Adam Alster,

Renaissance

High School, Detriot, MI, United States,

Marianne Livezey,

Pontiac High School, Pontiac, MI, United States,

Tuyen

Duddles,

Macomb Math and Science, Warren, MI, United

States

4:06pm – Collaborative Multidisciplinary Engineering

Design Experiences in IoT (Internet of Things) for Teachers

Through Summer Research Site Program

Technical Paper Publication. IMECE2018-87491

Hyoung Jin Cho, Alireza Karbalaei, Damla Turgut,

Melissa Dagley, Eleazar Vasquez III,

University of Central

Florida, Orlando, FL, United States

4:27pm – Mechanical Engineering Student Developed Lego

Engineering Design Learning Activity for 6th Grade Science

Students

Technical Paper Publication. IMECE2018-87499

Heather Lai,

SUNY New Paltz, New Paltz, NY, United States,

Laura Bryant,

New Paltz Middle School, New Paltz, NY, United

States

4:48pm – A Project-Based Learning Stem Program for

Middle and High School Students

Technical Paper Publication. IMECE2018-88647

Mohamed Gharib, G. Benjamin Cieslinski, Jowaher

Al-Marri, Brady Creel,

Texas A&M University at Qatar, Doha,

Qatar

5:09pm – Experiential Learning in STEM at the University of

the District of Columbia (UDC) Through the Implementation

of the First UDC Firebird Rover for the NASA Human

Exploration Rover Challenge

Technical Presentation. IMECE2018-88700

Jiajun Xu, Sasan Haghani,

University of the District of

Columbia, Washington, DC, United States

TRACK  ENGINEERING EDUCATION

–

WEDNESDAY, NOVEMBER 

7-12 ENGINEERING RESEARCH

INNOVATION AND RESEARCH

EXPERIENCES FOR UNDERGRADUATES

7-12-1 Engineering Research Innovation

Third Floor, David L. Lawrence Convention Center, Room 316

3:45pm–5:30pm

Session Chair: Nazmul Islam,

Univ of Texas Rio Grande Valley,

Edinburg, TX, United States

3:45pm – Development and Testing of a Lab-Scale Air-Gap

Membrane Distillation Unit for Water Desalination

Technical Paper Publication. IMECE2018-87088

Reza Baghaei Lakeh, Keaton Cornell, Benny Ly, Aaron

Chan,

Cal Poly Pomona, Pomona, CA, United States,

Sepideh

Jankhah,

Sterlitech Corp., Kent, WA, United States

4:06pm – Design of Instruments for Mechanical Testing of

3D Printed Parts

Technical Presentation. IMECE2018-87115

Serdar Tumkor, Jonathan Holman, Jace M. Rearick,

University of Pittsburgh, Johnstown, PA, United States

4:27pm – Outcomes of the Student Mentoring and

Research Training (SMART) Program

Technical Paper Publication. IMECE2018-88684

Nazmul Islam, Amy Weimer,

University of Texas Rio Grande

Valley, Edinburg, TX, United States

4:48pm – 3D Food Printing Insights and Opportunities: A

Capstone Design Case Study

Technical Presentation. IMECE2018-88770

Joseph Piacenza,

University of West Florida, Pensacola, FL,

United States,

Hope Weiss, Monika Patel, Sean Moore, Tam

Nguyen,

California State University Fullerton, Fullerton, CA,

United States

5:09pm – The Concept of Integrated Research in

Engineering Education

Technical Presentation. IMECE2018-88887

Mohammad Asaduzzaman Chowdhury,

Dhaka University of

Engineering & Technology, Gazipur, Gazipur, Bangladesh,

Bengir Ahmed Shuvho,

Dhaka University of Engineering &

Technology, Dhaka, Bangladesh,

Uttam Kumar Debnath,

Rajib Nandee,

Dhaka University of Engineering & Technology,

Gazipur, Gazipur, Bangladesh,

Suman Das,

University of

Saskatchewan, Saskatchewan, SK, Canada,

Atiqur Rahman,

Bangladesh Road Transport Authority, Dhaka, Bangladesh

THURSDAY, NOVEMBER 15

7-8 DISTANCE/ONLINE ENGINEERING

EDUCATION, MODELS AND ENABLING

TECHNOLOGIES

7-8-1 Distance/Online Engineering, Models and

Enabling Technologies – I

Third Floor, David L. Lawrence Convention Center, Room 317

8:55am–10:40am

Session Chair: Mohammad Naraghi,

Manhattan College,

Bronx, NY, United States

8:55am – Immersive Educational Systems With Procedure-

Oriented Combinations of Real and Virtual Environments

Technical Paper Publication. IMECE2018-86597

Zhou Zhang,

CUNY New York City College of Technology,

Jersey City, NJ, United States,

Shaojin Zhang,

New York City

College of Technology, Brooklyn, NY, United States,

Mingshao

Zhang,

Southern Illinois University Edwardsville, Edwardsville,

IL, United States,

Sven Esche,

Stevens Institute of Technology,

Hoboken, NJ, United States

9:16am – Virtual Teach Pendant Interface for Android

Cellphones (VTPAC)

Technical Paper Publication. IMECE2018-86865

Giulia A. Ferri,

Federal University of Techology, Curitiba,

Parana, Brazil,

Scott Walter, Asiri Tennakoon,

Visual

Components, Lake Orion, MI, United States,

Ana Djuric,

Wayne State University, Detroit, MI, United States

9:37am – Real-Time Distance Courses to Improve

Satisfaction and Competence: A Case Study of

International Professors and Local Students

Technical Paper Publication. IMECE2018-86877

Martha Elena Núñez,

Tecnologico de Monterrey, Puebla,

Puebla, Mexico,

Juan-Carlos Rojas,

Tecnologico de

Monterrey, Monterrey, Nuevo León, Mexico

9:58am – Assessing the Impact of Using Educational

Videos in Teaching Engineering Courses

Technical Paper Publication. IMECE2018-88216

Essam Zaneldin, Waleed Ahmed,

United Arab Emirates

University, Al Ain, United Arab Emir.

10:19am – Development of a Virtual Objects Tool to

Enhance Pedagogy of Thermodynamic Concepts

Technical Presentation. IMECE2018-89415

Sathyanarayanan Subramanian, Diana Bairaktarova,

Scott Huxtable,

Virginia Polytechnic Institute and State

University, Blacksburg, VA, United States

TRACK  ENGINEERING EDUCATION

–

WEDNESDAY, NOVEMBER  / THURSDAY, NOVEMBER 

7-10 TEACHING LABORATORIES, MACHINE

SHOP EXPERIENCES, AND TECHNOLOGY-

AIDED LECTURING

7-10-1 Teaching Laboratories, Machine Shop

Experiences and Technology-Aided Learning

Third Floor, David L. Lawrence Convention Center, Room 316

8:55am–10:40am

Session Chair: Salim Azzouz,

Midwestern State University,

Wichita Falls, TX, United States

8:55am – Incorporating Student-Led Design Projects in

Instrumentation and Measurements Laboratory

Technical Paper Publication. IMECE2018-86055

Emine Celik Foust,

York College of Pennsylvania, York, PA,

United States

9:16am – Introduction of Prevention Engineering in

Mechanical Engineering Curriculum

Technical Presentation. IMECE2018-86447

Zbigniew Bzymek,

University of Connecticut, Storrs, CT,

United States

9:37am – A Gear-Chain Based Transmission for the

Machine Elements Design Laboratory

Technical Paper Publication. IMECE2018-87107

Salim Azzouz, Guy Bernard,

Midwestern State University,

Wichita Falls, TX, United States

9:58am – Manufacturing Science Laboratory: Robotic

Ultrasonic Welding

Technical Paper Publication. IMECE2018-88437

Michael Mauk, Richard Chiou, Carlos Ruiz, Prashant Yadav,

Drexel University, Philadelphia, PA, United States

10:19am – A Proposed Engineering Curriculum for At-Risk

Students

Technical Presentation. IMECE2018-88921

Louis Everett,

University of Texas El Paso, El Paso, TX, United

States

7-3 ENGINEERING ACCREDITATION, DATA

COLLECTION, ASSESSMENT AND ABET

7-3-1 Engineering Accreditation, Data Collection,

Assessment and ABET Session I

Third Floor, David L. Lawrence Convention Center, Room 316

10:50am–12:35pm

Session Chair: Amir Karimi,

University of Texas-San Antonio,

San Antonio, TX, United States

10:50am – Sensitising Core Employability Skill Through

Peer Assessment Approach

Technical Paper Publication. IMECE2018-86056

Siddharthsinh Jadeja,

Aditya Silver Oak Institute of

Technology, Rajkot Gujarat, India,

Sujata Wadhwa,

FSO,

Ahmedabad, India,

Kapil Shukla,

Silver Oak College of

Engineering & Technology, Ahmedabad, India,

Amit Ved,

Marwadi University, Rajkot, India

11:11am – An Excel Add-in for Accreditation Data

Collection and Auto Grading Sheets (AGS): A Canadian

Experience

Technical Paper Publication. IMECE2018-88096

Mohamed Ismail,

University of Regina, Regina, SK, Canada

11:32am – Improving Engineering Students’ College Math

Readiness by MSEIP Summer Bridge Program

Technical Paper Publication. IMECE2018-88685

Nazmul Islam, Yong Zhou,

University of Texas Rio Grande

Valley, Edinburg, TX, United States

11:53am – Implementation of a New Student Outcome

Assessment and Continuous Improvement Procedure for

ABET-ETAC at SUNY Morrisville

Technical Pre

sentation. IMECE2018-88855

Mehmet Murat Baysal,

SUNY Morrisville State College,

Morrisville, NY, United States

7-8 DISTANCE/ONLINE ENGINEERING

EDUCATION, MODELS AND ENABLING

TECHNOLOGIES

7-8-2 Distance/Online Engineering, Models and

Enabling Technologies- II

Third Floor, David L. Lawrence Convention Center, Room 317

10:50am–12:35pm

Session Chair: Mohammad Naraghi,

Manhattan College,

Bronx, NY, United States

10:50am – Development of Telepresence Teaching Robots

With Social Capabilities

Technical Paper Publication. IMECE2018-86686

Mingshao Zhang, Pengji Duan,

Southern Illinois University

Edwardsville, Edwardsville, IL, United States,

Zhou Zhang,

CUNY New York City College of Technology, Jersey City, NJ,

United States,

Sven Esche,

Stevens Institute of Technology,

Hoboken, NJ, United States

11:11am – The Positive Effects of Using Social Networks in

Courses of Applied Mechanics on Students’ Performance

Technical Paper Publication. IMECE2018-87217

Miguel X. Rodriguez-Paz, Jorge A. Gonzalez-Mendivil, J.

Asuncion Zarate-Garcia, Luis O. Peña-Ortega,

Tecnologico

de Monterrey, Puebla, Puebla, Mexico

11:32am – Assessment of Three-Dimensional CAD Models

Using CAD Application Programming Interface

Technical Paper Publication. IMECE2018-87776

Sung-hwan Joo,

Grand Valley State University, Grand Rapids,

MI, United States

11:53am – Student Engagement Through Service Learning

Project

Technical Presentation. IMECE2018-89923

Shah Alam, Ulan Dakeev,

Texas A&M University - Kingsville,

Kingsville, TX, United States

TRACK  ENGINEERING EDUCATION

–

THURSDAY, NOVEMBER 

7-3 ENGINEERING ACCREDITATION, DATA

COLLECTION, ASSESSMENT AND ABET

7-3-2 Engineering Accreditation, Data Collection,

Assessment and ABET Session II

Third Floor, David L. Lawrence Convention Center, Room 316

2:05pm–3:50pm

Session Chair: Amir Karimi,

University of Texas-San Antonio,

San Antonio, TX, United States

2:05pm – OBACIS Analytics: The Catalogs

Technical Paper Publication. IMECE2018-88168

Mohamed Ismail,

University of Regina, Regina, SK, Canada

2:26pm – Cooperation of Three Faculty Members in

Assessment of Student Knowledge in Two Sections of an

Undergraduate Course

Technical Presentation. IMECE2018-89562

Amir Karimi, Ender Finol, Randall Manteufel,

University of

Texas at San Antonio, San Antonio, TX, United States

2:47pm – Implementing the Wright State Model for

Engineering Mathematics at University of Detroit Mercy

Technical Presentation. IMECE2018-89513

Shuvra Das,

University of Detroit Mercy, Detroit, MI, United

States

3:08pm – Mechanical Systems Senior Capstone Design

Course Experiences

Technical Presentation. IMECE2018-89261

aghu Echempati,

Kettering University, Flint, MI, United

States

7-7 PROBLEM SOLVING IN ENGINEERING

EDUCATION, RESEARCH AND PRACTICE

7-7-1 Problem Solving in Engineering Education,

Reseach and Practice – I

Third Floor, David L. Lawrence Convention Center, Room 315

2:05pm–3:50pm

Session Chair: Zbigniew Bzymek,

University of Connecticut,

Storrs, CT, United States

2:05pm – Finite Element Educational Program Improves

Mechanical Engineering Technology Student Performance

in the Finite Element Class

Technical Paper Publication. IMECE2018-86583

Serdar Ozlek,

New York City College of Technology, CUNY,

Brooklyn, NY, United States

2:26pm – Effective Approach to Teaching Stress and

Deformation Analysis in Mechanical Engineering Design

Technical Paper Publication. IMECE2018-86732

Zbigniew Bzymek,

University of Connecticut, Storrs, CT,

United States

2:47pm – Post-Graduation Assessment of the Effectiveness

of an Industrially Sponsored Senior Design Capstone

Course

Technical Paper Publication. IMECE2018-86812

Vito Moreno, Bryan Weber, Thomas Barber,

University of

Connecticut, Storrs, CT, United States

3:08pm – The Effect of Psychological Strategies in

Engineering Education

Technical Presentation. IMECE2018-88925

Mohammad Asaduzzaman Chowdhury,

Dhaka University of

Engineering & Technology, Gazipur, Gazipur, Bangladesh,

Bengir Ahmed Shuvho,

Dhaka University of Engineering &

Technology, Dhaka, Bangladesh,

Uttam Kumar Debnath,

Rajib Nandee,

Dhaka University of Engineering & Technology,

Gazipur, Gazipur, Bangladesh,

Suman Das,

University of

Saskatchewan, Saskatchewan, SK, Canada,

Md. Mir Sakib

Ahmed,

Dhaka University of Engineering & Technology,

Gazipur, Gazipur, Bangladesh

3:29pm – Real (Out of This) World Education and Research:

A Decade of Experience in Operating Professional Space

Missions

Technical Presentation. IMECE2018-89122

Christopher Kitts,

Santa Clara University, Santa Clara, CA,

United States

7-6 FLUID MECHANICS, HEAT TRANSFER,

EXPERIMENTS AND ENERGY SYSTEMS

7-6-1 Fluid Mechanics, Heat Transfer, Experiments

and Energy Systems

Third Floor, David L. Lawrence Convention Center, Room 316

4:00pm–5:45pm

Session Chair: Wael Mokhtar,

Grand Valley State University,

Grand Rapids, MI, United States

4:00pm – Fabrication and Plumbing Works Using Pipe

Fusion Thermal Technology: A Mechanical Engineering

Extension Service for the Drug Dependents

Technical Presentation. IMECE2018-89183

Ronald Galindo,

Cebu Technological University, Cebu City,

Philippines

4:21pm – An Experimental and Numerical Study on Airfoil

Flow Characteristics: Evaluating the Problem-Solving Skills

of Students

Technical Presentation. IMECE2018-89475

Sanjivan Manoharan, Dylan DiGiovanni, Jordan O’Hearn,

Grand Valley State University, Grand Rapids, MI, United States

4:42pm – Macgyvering and Entrepreneurial Mindset

Learning: Examples for the Thermodynamics Classroom

Technical Presentation. IMECE2018-89579

Natasha Vermaak, Yaozhong Zhang, Yangze Sun,

Lehigh

University, Bethlehem, PA, United States

TRACK  ENGINEERING EDUCATION

–

THURSDAY, NOVEMBER 

5:03pm – Examples of Undergraduate Research Project in

Thermodynamics: Generalized Correlations of Vapor

Pressure and Enthalpy of Vaporization

Technical Presentation. IMECE2018-89747

Amir Karimi, Joseph Stephen Fernandez,

University of Texas

at San Antonio, Victoria, TX, United States

7-7 PROBLEM SOLVING IN ENGINEERING

EDUCATION, RESEARCH AND PRACTICE

7-7-2 Problem Solving in Engineering Education,

Reseach and Practice – II

Third Floor, David L. Lawrence Convention Center, Room 315

4:00pm–5:45pm

Session Chair: Zbigniew Bzymek,

University of Connecticut,

Storrs, CT, United States

4:00pm – Using Engineering Equation Solver (EES) to Solve

Engineering Problems in Mechanical Engineering

Technical Paper Publication. IMECE2018-86078

Haifa El-Sadi,

Wentworth Institute of Technology, Boston, MA,

United States

4:21pm – Problem Based Learning: Generating a 3D

Educational Brain Model to Engage Undergraduate

Engineering Honors Students

Technical Paper Publication. IMECE2018-87197

Connie Gomez, Sheema Nasir,

San Jacinto College, Houston,

TX, United States

4:42pm – Hands-on Experiences for Problem Solving in

Engineering Education Based on Trees and Plants

Technical Paper Publication. IMECE2018-87583

Gustavo Vargas-Silva,

University of the Basque Country, San

Sebastian, Gipuzkoa, Spain,

Mariappan Jawaharlal,

California

State Polytechnic University, Pomona, Pomona, CA, United

States

5:03pm – Strategies to Address “Design Thinking” in

Engineering Curriculum

Technical Paper Publication. IMECE2018-87816

Devdas Shetty, Jiajun Xu,

University of the District of

Columbia, Washington, DC, United States

TRACK  ENGINEERING EDUCATION

–

THURSDAY, NOVEMBER 

8-1-1: Energy-Related Multidisciplinary – 1

8-1-2: Energy-Related Multidisciplinary – 2

8-2-1: Energy and Exergy Analysis of Power Cycles

8-2-2: Thermodynamics of Cooling and Thermal Processes

8-2-3: Chemical Thermodynamic Processes

8-2-4: On Entropy and Irreversibilities’ Minimization

8-3-1: Thermoeconomics

8-4-1: Advanced Power Cycles

8-4-2: Improvement in Performance and Emissions of Energy Systems

8-4-3: Solar/Waste-Heat Power Generation

8-4-4:

Engines Behaviour and Fuel Characteristics

8-4-5: Design and Analysis of Energy Systems – 1

8-4-6: Design and Analysis of Energy Systems – 2

8-5-1: Energy Systems Components – 1

8-5-2: Energy Systems Components – 2

8-6-1: Low-Temperature Energy Conversion Systems

8-7-1: Thermal Energy Storage – Devices I

8-7-2: Thermal Energy Storage – Materials

8-7-3: Thermal Energy Storage – Dev

ices II

8-7-4: Thermal Energy Storage – Systems Integration

8-8-1: Environmental Aspects of Energy Systems

8-9-1: Cooling Technologies

8-9-2: Building Energy Generation

8-9-3: Building Structure/Materials for Load Reduction

8-10-1: Advanced Technologies for Wind Energy

8-10-2: Advanced Technologies for Solar Energy

8-10-3: Advanced Technologies for Ocean Energy

8-10-4: Ad

vanced Technologies for Wind Energy II

8-10-5: Advanced Technologies for Solar Energy II

8-10-6: Energy Storage, Energy Harvesting, and Electric Cars

8-10-7: Biomass, Geothermal, and Small Scale Generation

8-10-8: Feasibility and Techno-Economic Analysis of Renewable Energy Technologies

8-11-1: Lithium Ion Batteries – Design and Performance

8-11-2: Modeling Efforts in Batteries

8-11-3: Structural Analysis of Li-Ion Batteries

8-11-4: Thermal A

spects of Li-Ion Batteries

8-11-5: Beyond Li-Ion Batteries

8-12-1: PEM Fuel Cells – I

8-12-2: PEM Fuel Cells – II

8-12-3: Fuel Cell Systems and Infrastructure

8-14-1: Nuclear Power Plants: Design, Analysis, and Safety

8-15-1: CMS-Biofuel Systems and Processes

8-16-1: CMS-Biofuels Production, Conversion, and Simulation

8-17-1: Energy Plenary

8-13-1 Plenary

Track Organizers

Roberto Carapellucci,

University of

L’Aquila, Italy

Yunho Hwang,

University of Maryland,

United States

Christopher Depcik,

University of

Kansas, United States

Topic Organizers

Claudia Toro,

University of Rome

Sapienza DMA, Italy

Mahmoud Elshara,

Midwestern State

University, United States

Irene Koronaki,

NTUA, Greece

Michael Nitsas,

National Technical

University of Athens, Greece

Vittorio Verda,

Politecnico di Torino –

Dip Energetica Politech, Italy

Roberto Capata,

University of Rome,

Italy

Andrea Lazzaretto,

University of Padua,

Italy

Adriano Sciacovelli,

University of

Birmingham, United Kingdom

Helena Navarro,

University of

Birmingham, United Kingdom

Jeyhoon Khodadadi,

Auburn University,

United States

Elisa Guelpa,

Politecnico di Torino –

DENERG, Italy

Yoshiharu Amano,

Waseda University,

Tokyo, Japan

Navid Goudarzi,

UNCC, United States

Jim Kuo,

California State University –

Los Angeles, United States

Soumik Banerjee,

Washington State

University, United States

George Nelson,

University of Alabama in

Huntsville, United States

Partha Mukherjee,

Purdue University,

United States

Soumik Banerjee,

Washington State

University, United States

Hakan Ozaltun,

Idaho National

Laboratory, United States

Jovica Riznic,

Canadian Nuclear Safety

Commission, Canada

Yunye Shi,

St. Ambrose University,

United States

Seyed Allameh,

Northern Kentucky

University, United States

Albert Ratner,

University of Iowa, United

States

Seyed Allameh,

Northern Kentucky

University, United States

Mohsen Saffari Pour,

KTH Royal Institute

of Technology, Sweden

Ahmed Emara,

Faculty of Engineering

Mattaria –Cairo, Egypt

Session Organizers

Mahmoud Elshara,

Midwestern State

University, United States

Claudia Toro,

University of Rome

Sapienza DMA, Italy

Michael Nitsas,

National Technical

University of Athens, Greece

Tatiana Morosuk,

Technical University

Berlin, Germany

George Tsatsaronis,

Technical University

of Berlin, Germany

Vittorio Verda,

Politecnico di Torino – Dip

Energetica Politech, Italy

Khamid Mahkamov,

Northumbria

University, United Kingdom

Gregory Kowalski,

Northeastern

University, United States

Qun Chen,

Tsinghua University, China

Auteliano A Santos,

Universidade

Estadual de Campinas, Brazil

Yousef Haseli,

Central Michigan

University, United States

Andrea Lazzaretto,

University of Padua,

Italy

Adriano Sciacovelli,

University of

Birmingham, United Kingdom

Maike Johnson,

German Aerospace

Center (DLR), Germany

Peiwen Li,

University of Arizona, United

States

Angel D. Ramirez,

Escuela Superior

Politécnica del Litoral, ESPOL,

Ecuador

Elisa Guelpa,

Politecnico di Torino –

DENERG, Italy

Sayed M. Metwalli,

Cairo University,

Egypt

Hohyun Lee,

Santa Clara University,

United States

Navid Goudarzi,

UNCC, United States

Emrah Celik,

University of Miami, United

States

Lea-Der Chen,

Texas A&M University-

Corpus Christi, United States

Jose C. Pascoa,

Universidade Da Beira

Interior, Portugal

Soumik Banerjee,

Washington State

University, United States

Partha Mukherjee,

Purdue University,

United States

Jovica Riznic,

Canadian Nuclear Safety

Commission, Canada

Hakan Ozaltun,

Idaho National

Laboratory, United States

Grant Hawkes,

Idaho National

Laboratory, United States

Yunye Shi,

St. Ambrose University,

United States

Seyed Allameh,

Northern Kentucky

University, United States

Albert Ratner,

University of Iowa, United

States

TRACK 8 ENERGY

MONDAY, NOVEMBER 12

8-4 DESIGN AND ANALYSIS OF ENERGY

CONVERSION SYSTEMS

8-4-1 Advanced Power Cycles

Third Floor, David L. Lawrence Convention Center, Room 317

9:45am–11:30am

Session Chair: Khamid Mahkamov,

Northumbria University,

Newcastle upon Tyne, United Kingdom

Session Co-Chair: Roberto Carapellucci,

University of

L’Aquila, L’Aquila, IT, Italy

9:45am – Power and Efﬁciency Optimizations for an Open

Cycle Two-Shaft Gas Turbine Power Plant

Technical Paper Publication. IMECE2018-86246

Huijun Feng, Wanli Zhang, Lingen Chen, Shaojun Xia,

Naval

University of Engineering, Wuhan, China

10:06am – Novel Twin-Screw Stirling Cycle Machine for

Cryogenic and Refrigeration Applications

Technical Paper Publication. IMECE2018-86853

Khamid Mahkamov, Irina Makhkamova, Fadi Kahwash,

Northumbria University, Newcastle upon Tyne, United Kingdom

10:27am – Thermal Design and Performance Prediction of a

Shell Condenser for Closed-Cycle Underwater Vehicles

Technical Paper Publication. IMECE2018-86999

Peiyu Chen, Hongbin Yan, Gongnan Xie,

Northwestern

Polytechnical University, Xi’an, China,

Bengt Sunden,

Lund

University, Lund, Sweden

10:48am – Heat Pump-Organic Rankine Cycle (HP-ORC)

Integrated Systems for Energy Storage Applications

Technical Presentation. IMECE2018-87442

Claudia Toro,

University of Rome Sapienza DMA, Rome, Italy,

Roberto Capata, Enrico Sciubba,

Univerersity of Rome,

Rome, Italy

11:09am – Thermodynamic Modeling of Allam Cycle

Technical Paper Publication. IMECE2018-88079

Najmus Saquib Sifat, Yousef Haseli,

Central Michigan

University, MT Pleasant, MI, United States

8-5 ENERGY SYSTEMS COMPONENTS

8-5-1 Energy Systems Components – 1

Third Floor, David L. Lawrence Convention Center, Room 306

9:45am–11:30am

Session Chair: Roberto Capata,

University of Rome, Roma, Italy

9:45am – On Numerical Investigation of Water Injection to

Screw Compressors

Technical Paper Publication. IMECE2018-86463

Sham Rane,

University of Oxford, Oxford, England, United

Kingdom,

Ahmed Kovacevic, Nikola Stosic,

City University

London, London, United Kingdom,

Graham Stupple,

Jaecklin

GmbH, Augsburg, Bavaria, Germany

10:06am – A Performance Comparison for Electric and

Hydraulic Motors

Technical Paper Publication. IMECE2018-86761

Mohammed Al-Mudhafar, Noah Manring,

University of

Missouri – Columbia, Columbia, MO, United States

10:27am – Design and Analysis of the Self-Powered Two-

Lobe and Three-Lobe Continuous Mud-Pulse Turbo Siren

Technical Paper Publication. IMECE2018-87733

Xiaobo Peng,

Prairie View A&M University, Prairie View, TX,

United States,

Diwei Zhang,

Prairie View A&M University,

Cypress, TX, United States

10:48am – A Reforming Characteristics of a Mid-

Temperature Methane-Steam Reformer With Various

Conﬁgurations

Technical Paper Publication. IMECE2018-88260

Kyungin Cho, Sangseok Yu, Jinwon Yun,

Chungnam National

University, Daejeon, Korea (Republic)

11:09am – Translator Dynamics and Performance

Comparison on One- and Two-Cylinder Free Piston Engines

Technical Paper Publication. IMECE2018-88689

Mehar Bade, Nigel Clark, Parviz Famouri, PriyaankaDevi

Guggilapu,

West Virginia University, Morgantown, WV, United

States

8-6 LOW-TEMPERATURE ENERGY

CONVERSION SYSTEMS

8-6-1 Low-Temperature Energy Conversion Systems

Third Floor, David L. Lawrence Convention Center, Room 319

9:45am–11:30am

Session Chair: Andrea Lazzaretto,

University of Padua, Italy,

Padova, Italy

9:45am – Preliminary Design of a Lab-Scale Organic

Rankine Cycle for Waste Heat Recovery Applications

Technical Paper Publication. IMECE2018-86434

Carlos Cabezas, José Mendoza, Iván Ponce, Rafael

Cantorin, Daniel Gonzales, Jessica Estrella, Sergio Peralta,

Cesar Celis,

Ponticia Universidad Católica del Perú, Lima,

Peru

10:06am – Comparative Exergy-Based Analysis of the LNG

Regasiﬁcation Integrated Into Air Separation Units With

External or Internal Compression Process

Technical Presentation. IMECE2018-87551

Tatiana Morosuk, Stefanie Tesch, George Tsatsaronis,

Technical University of Berlin, Berlin, Germany

10:27am – Exergy-Based and Economic Evaluation of

Cryogenics-Based Energy Storage

Technical Presentation. IMECE2018-87572

Tatiana Morosuk, Sarah Hamdy, George Tsatsaronis,

Technical University of Berlin, Berlin, Germany

TRACK  ENERGY

–

MONDAY, NOVEMBER 

10:48am – Low-Temperature Thermal Energy Harvesting

Using Solid/Liquid Phase Change Materials

Technical Paper Publication. IMECE2018-87956

Guangyao Wang, Dong Sam Ha, Kevin G. Wang,

Virginia

Tech, Blacksburg, VA, United States

11:09am – Design and Optimization of Flow Thermo-

Electrochemical Cell to Harvest Low Temperature Waste

Heat

Technical Presentation. IMECE2018-89546

Ali Hussain Kazim, Aqib Javaid, Asif Mutahir, Muhammad

Faraz,

University of Engineering and Technology, Lahore,

Lahore, Punjab, Pakistan

8-11 ELECTROCHEMICAL ENERGY

CONVERSION AND STORAGE

8-11-1 Lithium Ion Batteries—Design and

Performance

Third Floor, David L. Lawrence Convention Center, Room 318

9:45am–11:30am

Session Chair: Soumik Banerjee,

Washington State University,

Pullman, WA, United States

Session Co-Chair: George Nelson,

University of Alabama in

Huntsville, Huntsville, AL, United States

9:45am – Discovery and Development of a Fast Charging

Li-Ion Battery

Technical Paper Publication. IMECE2018-87661

Teng Liu, Xiao-Guang Yang,

Pennsylvania State University,

State College, PA, United States,

Chao-Yang Wang,

Pennsylvania State University, University Park, PA, United

States

10:06am – Predicting Second-Life Aging in Lithium-Ion

Batteries Repurposed From Electric Vehicles Battery Packs

Technical Presentation. IMECE2018-88842

Daniela Galatro, Carlos Da Silva, Olivier Trescases, Zhe

Gong, Cristina H. Amon,

University of Toronto, Toronto, ON,

Canada

10:27am – A Comprehensive Review of Deformation

Induced Short Circuit (ISC) in Li-Ion Batteries

Technical Presentation. IMECE2018-88952

Golam Newaz,

Wayne State University, Ann Arbor, MI, United

States,

Leela Mohana Reddy Arava,

Wayne State University,

Farmington Hills, MI, United States,

Sanket Mundhe,

Wayne

State University, Detroit, MI, United States,

Min Zhu, Omar

Faruque, James Cheng, Saeed Barbat,

Ford Motor

Company, Dearborn, MI, United States

10:48am – Characterization of Transport Parameters in

NMC Cathode Phases Using X-ray Microtomography Data

Technical Presentation. IMECE2018-88285

Thushananth Rajendra,

University of Alabama in Huntsville,

Huntsville, AL, United States,

Aashutosh Mistry,

Purdue

University, West Lafayette, IN, United States,

Xianghui Xiao,

Argonne National Laboratory, Lemont, IL, United States,

Partha Mukherjee,

Purdue University, West Lafayette, IN,

United States,

George Nelson,

University of Alabama in

Huntsville, Huntsville, AL, United States

11:09am – Measurement of Mechanical Properties and

Assessment of Mechanical Degradation of Solid Electrolyte

Interphase (SEI) Formed With Carbonate-Based

Electrolytes

Technical Presentation. IMECE2018-89471

Insun Yoon, Pradeep Guduru,

Brown University, Providence,

RI, United States

8-15 CMS-BIOFUEL PRODUCTION,

GASIFICATION, AND COMBUSTION

8-15-1 CMS-Biofuel Systems and Processes

Third Floor, David L. Lawrence Convention Center, Room 316

9:45am–11:30am

Session Chair: Yunye Shi,

St. Ambrose University, Davenport,

IA, United States

Session Co-Chair: Seyed Allameh,

Northern Kentucky

University, Newport, KY, United States

9:45am – Modeling Woody Biomass Torrefaction Process

Technical Paper Publication. IMECE2018-87974

Mahmudul Hasan, Yousef Haseli,

Central Michigan

University, Mt. Pleasant, MI, United States

10:06am – Experimental and Simulation Studies of Corn

Kernel Gasiﬁcation in a Double Air Stage Downdraft

Reactor

Technical Paper Publication. IMECE2018-88010

Yunye Shi,

St. Ambrose University, Davenport, IA, United

States,

Diego M. Yepes Maya, Regis Nascimento,

Federal

University of Itajuba, Itajuba, MG, Brazil,

Tejasvi Sharma,

Albert Ratner,

University of Iowa, Iowa City, IA, United States,

Electo E. Silva Lora,

Federal University of Itajuba, Itajuba, MG,

Brazil

10:27am – Physical (Steam) Activation of Post-Gasiﬁcation

Biochar Derived From Peach Pits

Technical Paper Publication. IMECE2018-88386

Andres Munoz-Hernandez, Sina Dehghan, Gerardo Diaz,

University of California – Merced, Merced, CA, United States

10:48am – Design, Flame Analysis and Performance

Evaluation of a Laboratory Scale Bio Lantern Fueled Using

Cow-Tallow Bio-Diesel

Technical Presentation. IMECE2018-88991

Onyemazuwa A. Azaka, Emmanuel C. Nwadike,

Nnamdi

Azikiwe University, Awka, Anambra State/South-Easter

Nigerian, Nigeria

TRACK  ENERGY

–

MONDAY, NOVEMBER 

11:09am – Design and Construction of a Laboratory Scale

Lantern for bio Fuel-Biodiesel Combustion and Flame

Structure Analysis

Technical Presentation. IMECE2018-88992

Emmanuel C. Nwadike, Onyemazuwa A. Azaka,

Nnamdi

Azikiwe University, Awka, Southeastern Nigeria, Nigeria

8-2 FUNDAMENTALS AND APPLICATIONS

OF THERMODYNAMICS

8-2-1 Energy and Exergy Analysis of Power Cycles

Third Floor, David L. Lawrence Convention Center, Room 306

1:45pm–3:30pm

Session Chair: Michael Nitsas,

National Technical University of

Athens, Zografou, Greece

1:45pm – Modeling and Performance Analysis of a Dual-

Shaft Counter-Rotating Gas Turbine

Technical Paper Publication. IMECE2018-86146

Qiao Zhou,

Chinese Academy of Sciences, Beijing, China,

Zhao Yin, Chunqing Tan, Qing Gao, Yongsheng Tian,

Institute of Engineering Thermophysics, Chinese Academy of

Sciences, Beijing, China

2:06pm – Triaxial Gas Turbine Performance Analysis for

Variable Power Turbine Inlet Guide Vane Control Law

Optimization

Technical Paper Publication. IMECE2018-86161

Tao Wang,

Chinese Academy of Sciences, Beijing, China,

Yongsheng Tian, Zhao Yin, Qing Gao, Chunqing Tan,

Institute of Engineering Thermophysics, Chinese Academy of

Sciences, Beijing, China

2:27pm – Performance Comparison and Parametric

Analysis of sCO

Power Cycles Conﬁgurations

Technical Paper Publication. IMECE2018-86843

Ali Alsagri,

University of Dayton, Beavercreek, OH, United

States,

Andrew Chiasson, Ahmad A. Aljabr,

University of

Dayton, Dayton, OH, United States

2:48pm – Thermo-Economic Analysis of an Integrated

Supercritical CO

Brayton Cycle and Multiple Effect

Desalination Systems

Technical Paper Publication. IMECE2018-88409

Sattam Alharbi, Mohamed L. Elsayed, Louis Chow,

University of Central Florida, Orlando, FL, United States

3:09pm – Exergy and Energy Analysis of a Combined Power

Cycle

Technical Presentation. IMECE2018-88917

Almandhar AlNaamani,

Sultan Qaboos University, Muscat,

Muscat, Oman,

Nabeel AlRawahi,

Sultan Qaboos University,

Al Khoud, Muscat, Oman

8-4 DESIGN AND ANALYSIS OF ENERGY

CONVERSION SYSTEMS

8-4-2 Improvement in Performance and Emissions of

Energy Systems

Third Floor, David L. Lawrence Convention Center, Room 317

1:45pm–3:30pm

Session Chair: Gregory Kowalski,

Northeastern University,

Boston, MA, United States

Session Co-Chair: Roberto Carapellucci,

University of

L’Aquila, L’Aquila, IT, Italy

1:45pm – Thermodynamic Performance Study of the SOFC-

GT-RC System Fueled by LNG With Zero-CO

-Emission

Technical Paper Publication. IMECE2018-86115

Xiaoyu Yang, Hongbin Zhao,

China University of Petroleum,

Beijing, Beijing, China

2:06pm – MCFC-Based System for Active CO

Capture

From Flue Gases

Technical Paper Publication. IMECE2018-86881

Roberto Carapellucci, Roberto Cipollone, Davide Di

Battista,

University of L’Aquila, L’Aquila, Italy

2:27pm – Methanol Production From Coal—Performance

and Exergy Analysis of Synthesis Routes With an Entrained

and a Moving Bed Gasiﬁer

Technical Presentation. IMECE2018-87560

Tatiana Morosuk, Timo Blumberg, George Tsatsaronis,

Technical University of Berlin, Berlin, Germany

2:48pm – Energy and Exergy Analysis of a Biomass Based

Ceramic Plant

Technical Paper Publication. IMECE2018-88046

Diogo Esteves, Cândida Vilarinho, Manuel Eduardo

Ferreira, Joana Carvalho,

University of Minho, Guimarães,

Portugal,

Jorge Araújo,

CVR - Centro para a Valorização de

Resíduos, Guimarães, Portugal,

Jose Teixeira,

University of

Minho, Guimarães, Portugal

3:09pm – Effect of Thermal Storage on the Performance of

Residential Scale Hybrid Tri-Generation System

Technical Presentation. IMECE2018-88213

Varun Gaur, Vaibhav Sahdev,

Northeastern University, Boston,

MA, United States,

Mansour Zenouzi,

Wentworth Institute of

Technology, Boston, MA, United States,

Gregory Kowalski,

Northeastern University, Boston, MA, United States

TRACK  ENERGY

–

MONDAY, NOVEMBER 

8-10 RENEWABLE ENERGY

8-10-1 AdvancedTechnologies for Wind Energy

Third Floor, David L. Lawrence Convention Center, Room 319

1:45pm–3:30pm

Session Chair: Christopher Depcik,

University of Kansas,

Lawrence, KS, United States

Session Co-Chair: Navid Goudarzi,

UNCC, Charlotte, NC,

United States

1:45pm – Large-Eddy Simulation of Offshore Wind Farms

for Power Prediction

Technical Paper Publication. IMECE2018-87965

Micah Sandusky,

Boise State University, Boise, ID, United

States,

Rey DeLeon,

University of Idaho, Moscow, ID, United

States,

Inanc Senocak,

University of Pittsburgh, Pittsburgh,

PA, United States

2:06pm – Variable Twist Blade Transformation to Improve

Wind Turbine Performance

Technical Paper Publication. IMECE2018-88433

Hamid Khakpour Nejadkhaki, John Hall,

University at

Buffalo, State University of New York, Buffalo, NY, United

States

2:27pm – Wind Farm Micrositing Layout Optimization Using

Stackelberg Game Theory Approach

Technical Presentation. IMECE2018-88978

Ramin Farajiﬁjani,

Alfred University, Alfred, NY, United States,

Saeed Ahmadian,

University of Houston, Houston, TX, United

States,

Ehsan Ghotbi,

Alfred University, Alfred, NY, United

States

2:48pm – Numerical Investigation and Optimization of

Conventional VAWT in Combination with Convergent

Nozzle

Technical Presentation. IMECE2018-88765

Mst Sunzida Ferdoues, Krishna Vijayaraghavan,

Simon

Fraser University, North York, ON, Canada

3:09pm – Mini Wind Turbine for Small Scale Power

Generation and Storage (Archimedes Wind Turbine Model)

Technical Paper Publication. IMECE2018-88455

Michael Ozeh, Ashreet Mishra, Xiuling Wang,

Purdue

University Northwest, Hammond, IN, United States

8-11 ELECTROCHEMICAL ENERGY

CONVERSION AND STORAGE

8-11-2 Modeling Efforts in Batteries

Third Floor, David L. Lawrence Convention Center, Room 318

1:45pm–3:30pm

Session Chair: Soumik Banerjee,

Washington State University,

Pullman, WA, United States

Session Co-Chair: Partha Mukherjee,

Purdue University, West

Lafayette, IN, United States

1:45pm – Machine Learning Based Understanding of

Lithium-Ion Battery Performance Decay

Technical Presentation. IMECE2018-87162

Ankit Verma, Partha Mukherjee,

Purdue University, West

Lafayette, IN, United States

2:06pm – Sodium Ion Transport in Sodium Thiophosphate

Glasses: An Ab Initio Molecular Dynamics Study

Technical Presentation. IMECE2018-88224

Aniruddha Dive, Scott Beckman, Soumik Banerjee,

Washington State University, Pullman, WA, United States

2:27pm – A Computer Experiment Based Real Time

Simulation Model for a Spirally-Wounded Lithium-Ion Cell

Technical Presentation. IMECE2018-88509

Chao Li,

Rutgers University, Piscataway, NJ, United States,

Assimina Pelegri,

Rutgers University, East Brunswick, NJ,

United States

2:48pm – Machine Learning Analysis of Degradation—

Safety Interaction in Li-Ion Cells

Technical Presentation. IMECE2018-87819

Daniel Juarez-Robles, Partha Mukherjee,

Purdue University,

West Lafayette, IN, United States,

Judith Jeevarajan,

Underwriters Laboratories Inc., Northbrook, IL, United States

3:09pm – Reactive Force Field Based Molecular Dynamics

Simulations to Investigate Sodium Ion Transport in Glassy

Electrolytes

Technical Presentation. IMECE2018-88207

Aniruddha Dive, Scott Beckman, Soumik Banerjee,

Washington State University, Pullman, WA, United States

TRACK  ENERGY

–

MONDAY, NOVEMBER 

8-16 CMS-BIOFUELS PRODUCTION,

CONVERSION, AND SIMULATION

8-16-1 CMS-Biofuels Production, Conversion, and

Simulation

Third Floor, David L. Lawrence Convention Center, Room 316

1:45pm–3:30pm

Session Chair: Albert Ratner,

University of Iowa, Iowa City, IA,

United States

Session Co-Chair: Seyed Allameh,

Northern Kentucky

University, Newport, KY, United States

1:45pm – A Life Cycle Assessment of Biofuel Produced

From Waste Cooking Oil

Technical Paper Publication. IMECE2018-86301

Sierra Spencer, Malia Scott, Nelson Macken,

Swarthmore

College, Swarthmore, PA, United States

2:06pm – Understanding the Effect of Oxygenated Biofuels

Addition on Combustion Characteristics of Gasoline

Technical Paper Publication. IMECE2018-86490

Shrabanti Roy,

Mississippi State University, Starkville, MS,

United States,

Saeid Zare, Omid Askari,

Mississippi State

University, Mississippi State, MS, United States

2:27pm – The Development of a Simple Alternative Hybrid

Engine for Gasoline, LPG and Biogas

Technical Paper Publication. IMECE2018-86552

Anchasa Pramuanjaroenkij, Amarin Tongkratoke, Siriluk

hankhoksoong,

Kasetsart University, Sakon Nakhon, Sakon

Nakhon, Thailand,

Sadik Kakac,

Tobb University of Economics

and Technology, Ankara, Turkey

2:48pm – Effect of Diethyl Ether on the Performance and

Emission Characteristics of Diesel “Rice Bran Methyl

Ester” Biogas Fueled Dual Fuel Diesel Engine

Technical Presentation. IMECE2018-89362

S.K. Mahla, IKG Punjab

Technical University, Hoshiarpur,

India,

Haeng Muk Cho,

Kongju National University, South

Korea, Cheonan, Korea (Republic),

Bhupendra Singh

Cahauhan,

Lovely Professional University, Phagwara, Punjab,

India

8-1 ENERGY-RELATED

MULTIDISCIPLINARY

8-1-1 Energy-Related Multidisciplinary – 1

Third Floor, David L. Lawrence Convention Center, Room 316

3:45pm–5:30pm

Session Chair: Mahmoud Elshara,

Midwestern State

University, Wichita Falls, TX, United States

Session Co-Chair: Claudia Toro,

University of Rome Sapienza

DMA, Roma, Italy

3:45pm – Deep Decarbonization of Total Global Energy:

Hydrogen and Ammonia C-free Fuels versus Electricity as

Integrated CO

-Emission-Free Energy Systems

Technical Presentation. IMECE2018-86186

William Leighty,

The Leighty Foundation, Juneau, AK, United

States

4:06pm – Experimental Study of the Sustainability of a

Renewable-Energy-Driven Residential System With Heating

Loads

Technical Paper Publication. IMECE2018-86242

Takao Kakizaki, Kosuke Hirano, Norio Morohashi, Masahito

Oguma,

Nihon University, Koriyama, Fukushima, Japan

4:27pm – Wet Gas Compressor Operation and Performance

Technical Paper Publication. IMECE2018-86562

Martin Bakken, Tor Bjorge, Lars Eirik Bakken,

Norwegian

University of Science and Technology, Trondheim, Norway

4:48pm – Energy Mix Forecasting in Abu Dhabi Using Mixed

Integer Linear Program

Technical Paper Publication. IMECE2018-87575

Moza Al Naimi, Mohamed Ali,

Khalifa University of Science

and Technology, Masdar City, Abu Dhabi, United Arab Emir.,

Gento Mogi,

University of Tokyo, Tokyo, Japan

5:09pm – Energy Efﬁcient Metal Mesh Fog Filters to

Simultaneously Harness Atmospheric Fog-Water and

Remove VOCs

Technical Presentation. IMECE2018-89731

Ritwick Ghosh, Rakesh Sahu, Igor Zhitomirsky,

McMaster

University, Hamilton, ON, Canada,

Ranjan Ganguly,

Jadavpur

University, Kolkata, West Bengal, India,

Ishwar K. Puri,

McMaster Universiy, Hamilton, ON, Canada

TRACK  ENERGY

–

MONDAY, NOVEMBER 

8-2 FUNDAMENTALS AND APPLICATIONS

OF THERMODYNAMICS

8-2-2 Thermodynamics of Cooling and Thermal

Processes

Third Floor, David L. Lawrence Convention Center, Room 315

3:45pm–5:30pm

Session Chair: Michael Nitsas,

National Technical University of

Athens, Zografou, Greece

3:45pm – Thermoeconomic Analysis of a Solar MVC

Desalination System

Technical Paper Publication. IMECE2018-86212

Lei Gao, Gyeong Sung Kim, Yunho Hwang,

University of

Maryland, College Park, MD, United States

4:06pm – A Comparative Study of Solar-Driven Absorption

Refrigeration Cycles- Effect of the Utilized Working Pair

Technical Presentation. IMECE2018-86864

Michael Nitsas, Irene Koronaki,

National Technical University

of Athens, Zografou, Greece

4:27pm – Thermal Analysis of Phase Change Materials by

Utilizing Nanoparticles

Technical Paper Publication. IMECE2018-87026

Michael Nitsas, Irene Koronaki, Athanasios Beliotis,

National Technical University of Athens, Athens, Greece

4:48pm – First and Second Law Analysis of a Flat Plate

Collector Working With Nanoﬂuids

Technical Paper Publication. IMECE2018-87782

Michael Nitsas, Irene Koronaki, Loukia Prentza,

National

Technical University of Athens, Athens, Greece

5:09pm – Experimental Investigation of Ejector

Refrigeration System With Double Condensers

Technical Paper Publication. IMECE2018-88671

H.H. Sait,

King Abdulaziz University, Rabigh, Makkah, Saudi

Arabia,

B.A. Habibullah, Nadim Turkman,

King Abdulaziz

University, Jeddah, Saudi Arabia,

Hongbin Ma,

University of

Missouri, Columbia, MO, United States

8-4 DESIGN AND ANALYSIS OF ENERGY

CONVERSION SYSTEMS

8-4-3 Solar/Waste-Heat Power Generation

Third Floor, David L. Lawrence Convention Center, Room 317

3:45pm–5:30pm

Session Chair: Tatiana Morosuk,

Technical University Berlin,

Berlin, Germany

Session Co-Chair: Roberto Carapellucci,

University of

L’Aquila, L’Aquila, IT, Italy

3:45pm – Thermodynamic Performance Study on Solar-

Assisted SOFC - GT Distributed Energy System Fueled by

Methanol

Technical Paper Publication. IMECE2018-86114

Qinlong Hou, Hongbin Zhao,

China University of Petroleum,

Beijing, Beijing, China

4:06pm – Supercritical CO

Cycle Combined With

Concentrated Solar Tower Technology

Technical Presentation. IMECE2018-87578

atiana Morosuk, Mohamed Noaman, George Tsatsaronis,

Technical University of Berlin, Berlin, Germany

4:27pm – Exergy-Based Evaluation of a Waste-Heat Driven

Tri-Generation System With CO

as Working Fluid

Technical Presentation. IMECE2018-87584

Tatiana Morosuk, Jing Luo, George Tsatsaronis,

Technical

University of Berlin, Berlin, Germany

4:48pm – Retroﬁtting Gas Turbine Units Parabolic Trough

Concentrated Solar Power for Sustainable Electricity

Generation

Technical Paper Publication. IMECE2018-87673

Mohamed Ali, Wael Alnahdi, Sara Al Shamsi, Wafaa

Alantali, Shaikha Al Shehhi,

Khalifa University of Science and

Technology, Masdar City, Abu Dhabi, United Arab Emir.

5:09pm – Development and Investigation of a Solar-Biogas

Hybrid Brayton Cycle for 100 kW Power Generation

Technical Paper Publication. IMECE2018-87678

Saad Alshahrani, Abraham Engeda,

Michigan State

University, East Lansing, MI, United States

8-5 ENERGY SYSTEMS COMPONENTS

8-5-2 Energy Systems Components – 2

Third Floor, David L. Lawrence Convention Center, Room 306

3:45pm–5:30pm

Session Chair: Roberto Capata,

University of Rome, Roma, Italy

3:45pm – Design and Testing of a Micro-Bubble Separation

System

Technical Paper Publication. IMECE2018-86104

Jordan Farina, Christopher Manderson, Phillip Tran,

Heather Dillon,

University of Portland, Portland, OR, United

States

4:06pm – Experimental Study of a Robust Foil Regenerator

in the Oscillating Flow

Technical Paper Publication. IMECE2018-86702

Koji Yanaga, Songgang Qiu, Pawan Yadav,

West Virginia

University, Morgantown, WV, United States

4:27pm – Effect of Geometric Conﬁguration and Back Plate

Addition in Minichannel Solar Collectors

Technical Paper Publication. IMECE2018-87852

Julio Perez, Sai Kiran Hota, Gerardo Diaz,

University of

California – Merced, Merced, CA, United States

4:48pm – A Study of Water Transport of Hollow Fiber

Membranes Over Various Operating Conditions

Technical Paper Publication. IMECE2018-88067

Jongmin Chae, Sangseok Yu,

Chungnam National University,

Daejeon, Korea (Republic)

TRACK  ENERGY

–

MONDAY, NOVEMBER 

5:09pm – Structural Analysis of Ground Mounted Solar

Panel Array

Technical Paper Publication. IMECE2018-88526

Ashhar Tufail Mohammmad, Barun Pratiher,

Indian Institute

of Technology Jodhpur, Jodhpur, Rajasthan, India

8-10 RENEWABLE ENERGY

8-10-2 AdvancedTechnologies for Solar Energy

Third Floor, David L. Lawrence Convention Center, Room 319

3:45pm–5:30pm

Session Chair: Christopher Depcik,

University of Kansas,

Lawrence, KS, United States

Session Co-Chair: Navid Goudarzi,

UNCC, Charlotte, NC,

United States

3:45pm – Thermal Modeling of Concentrated Photovoltaic

Thermal System at Different Operating Conditions

Technical Paper Publication. IMECE2018-86899

Shah Alam, Rahul C. Yelamanchili,

Texas A&M University -

Kingsville, Kingsville, TX, United States

4:06pm – Harnessing of Solar Energy With and Without

Tracking

Technical Presentation. IMECE2018-89922

Mehmet Sozen,

Grand Valley State University, Grand Rapids,

MI, United States,

Md. Nahid Pervez,

Ford Motor Company,

Palo Alto, CA, United States

4:27pm – Optimization of Nano-Texture Parameters of

CdTe/CdS Thin Film Solar Cells

Technical Paper Publication. IMECE2018-86858

Joshua Smay, Ola Rashwan, James Then

Penn State-

Harrisburg, Middletown, PA, United States

4:48pm – Solar Photovoltaic Power Plant Development for

a Desert Climate

Technical Paper Publication. IMECE2018-86588

Abdullah Alanezi, Mohammad Naraghi,

Manhattan College,

Bronx, NY, United States

5:09pm – Photovoltaic Solar Energy: Potentials and

Outlooks

Technical Paper Publication. IMECE2018-86991

Williams S. Ebhota, Tien-Chien Jen,

University of

Johannesburg, Johannesburg, South Africa

8-11 ELECTROCHEMICAL ENERGY

CONVERSION AND STORAGE

8-11-3 Structural Analysis of Li-ion Batteries

Third Floor, David L. Lawrence Convention Center, Room 318

3:45pm–5:30pm

Session Chair: George Nelson,

University of Alabama in

Huntsville, Huntsville, AL, United States

3:45pm – In Situ Measurement of Plane Strain Modulus of

the Solid Electrolyte Interphase (SEI) on Lithium Metal

Anodes in Ionic Liquid Electrolytes

Technical Presentation. IMECE2018-89473

Insun Yoon, Pradeep Guduru,

Brown University, Providence,

RI, United States

4:06pm – Tuning Electrode Structure to Improve the Rate

Capability of Energy Dense Lithium Ion Batteries

Technical Presentation. IMECE2018-89998

Prehit Patel, Thushananth Rajendra, George Nelson,

University of Alabama in Huntsville, Huntsville, AL, United

States

4:27pm – Local Strain Assessment in Li-Ion Battery Layers

Subjected to External Deformation

Technical Presentation. IMECE2018-88962

Golam Newaz,

Wayne State University, Ann Arbor, MI, United

States,

Leela Mohana Reddy Arava,

Wayne State Univeristy,

Farmington Hills, MI, United States,

Sanket Mundhe,

Wayne

State Univeristy, Detroit, MI, United States,

Min Zhu, Omar

Faruque, James Cheng, Saeed Barbat,

Ford Motor

Company, Dearborn, MI, United States

4:48pm – Real-Time Measurement of Phase Transformation

in Electrode Materials by Integrating In Situ Picosecond

Ultrasonics and Atomic Force Microscopy

Technical Presentation. IMECE2018-89477

Shaghayegh Rezazadeh Kalehbasti, LiWei Liu, Humphrey

Maris, Pradeep Guduru,

Brown University, Providence, RI,

United States

5:09pm – Effect of Stress on the Li Diffusivity in Ge

Electrode

Technical Presentation. IMECE2018-89295

Siva P.V. Nadimpalli, Rajasekhar Tripuraneni, Subhajit

Rakshit,

New Jersey Institute of Technology, Newark, NJ,

United States

TRACK  ENERGY

–

MONDAY, NOVEMBER 

TUESDAY, NOVEMBER 13

8-17 ENERGY PLENARY

8-17-1 Energy Plenary

Third Floor, David L. Lawrence Convention Center, Room 302

8:00am–8:45am

8:00am – Thoughts on the Future of Power Generation:

A Low Carbon Perspective

Plenary Presentation. IMECE2018-90099

Ahmed Ghoniem,

Massachusetts Institute of Technology,

Cambridge, MA, United States

8-1 ENERGY-RELATED

MULTIDISCIPLINARY

8-1-2 Energy-Related Multidisciplinary – 2

Third Floor, David L. Lawrence Convention Center, Room 315

10:00am–11:45am

Session Chair: Claudia Toro,

University of Rome Sapienza

DMA, Roma, Italy

Session Co-Chair: Mahmoud Elshara,

Midwestern State

University, Wichita Falls, TX, United States

10:00am – Measurements of the Contact Angles for Various

Fluids Which Are Widely Used in the Oilﬁelds to Improve Oil

Recovery

Technical Paper Publication. IMECE2018-86717

Mahmoud Elsharaﬁ, Kelton Vidal, Rumeli

a Thomas,

Midwestern State University, Wichita Falls, TX, United States

10:21am – On-Board State of Health Estimation of Lithium

Ion Batteries With Incremental Capacity Analysis Based on

Gaussian Function

Technical Paper Publication. IMECE2018-86902

Tongyi Liang, Lingjun Song,

Beihang University, Beijing,

China

10:42am – Effect of Nonlinear Characteristic of the Gas

Turbine Engine Fuel System With Hardware-in-the-Loop

Technical Paper Publication. IMECE2018-86922

Jinwei Chen, Jingxuan Li, Shengnan Sun, Huisheng Zhang,

Shanghai Jiao Tong University, Shanghai, China

11:03am – High Voltage Plasma Reactor for Treatment of

Carbon Dioxide and Oxygen Generation

Technical Paper Publication. IMECE2018-87610

Kamau Wright,

University of Hartford, West Hartford, CT,

United States

11:24am – Mechanical Testing and Modeling of the

Graphite Anode of Lithium-Ion Batteries

Technical Presentation. IMECE2018-89468

Wei Li, Tsinghua

University, Beijing, Beijing, China,

Juner Zhu,

Massachusetts Institute of Technology, Cambridge, MA, United

States,

Xia Yong,

Tsinghua University, Beijing, Beijing, China,

Elham Sahraei Esfahani,

George Mason University, Fairfax,

VA, United States

8-2 FUNDAMENTALS AND APPLICATIONS

OF THERMODYNAMICS

8-2-3 Chemical Thermodynamic Processes

Third Floor, David L. Lawrence Convention Center, Room 311

10:00am–11:45am

Session Chair: George Tsatsaronis,

Technical University of

Berlin, Berlin, Germany

Session Co-Chair: Michael Nitsas,

National Technical

University of Athens, Zografou, Greece

10:00am – Ecological Performance of a Generalized

Radiative System Light-Driven Engine (LDE) With [A]f [B]

Reacting System Improved by Controlling Piston Motion

Technical Paper Publication. IMECE2018-86252

Huijun Feng, Kang Ma, Lingen Chen, Shaojun Xia,

Naval

University of Engineering, Wuhan, China

10:21am – Avoidable and Unavoidable Exergetic

Destruction Analysis of a Nitric Acid Production Plant

Technical Paper Publication. IMECE2018-87495

Juan Fajardo,

Universidad Tecnológica de Bolívar, Cartagena,

Colombia,

Harold Valle,

University of Puerto Rico, Cartagena,

Cartagena, Colombia,

Ana Buelvas,

Universidad Tecnológica

de Bolívar, Catagena de Indias, Bolivar, Colombia

10:42am – Advances in Combustion Irreversibility Analysis

by Using a Heuristic Finite Increment Method

Technical Presentation. IMECE2018-89270

Yuejun Yan, Noam Lior,

University of Pennsylvania,

Philadelphia, PA, United States

11:03am – Inﬂuence of Advanced Injection Timing on

Exergy Anaysis of DI Diesel Engine Fuelled With Waste

Cooking Oil Biodiesel

Technical Presentation. IMECE2018-89534

Veena Chaudhary,

Indian Institute of Technology Roorkee,

Roorkee, Uttrakhand, India

11:24am – Extending Degree of Disequilibrium Analysis for

Automatic Selection of Kinetic Constraints in the Rate-

Controlled Constrained-Equilibrium Method

Technical Paper Publication. IMECE2018-86509

Fatemeh Hadi,

Tennessee State University, Nashville, TN,

United States,

Vreg Youseﬁan,

Tennessee State University,

Carlisle, MA, United States,

Ehsan Sarfaraz,

Tennessee State

University, Nashville, TN, United States,

Gian Paolo Beretta,

Universita di Brescia, Brescia, Italy

TRACK  ENERGY

–

TUESDAY, NOVEMBER 

8-4 DESIGN AND ANALYSIS OF ENERGY

CONVERSION SYSTEMS

8-4-4 Engines Behaviour and Fuel Characteristics

Third Floor, David L. Lawrence Convention Center, Room 316

10:00am–11:45am

Session Chair: Qun Chen,

Tsinghua University, Beijing, China

Session Co-Chair: Roberto Carapellucci,

University of

L’Aquila, L’Aquila, IT, Italy

10:00am – Development of Test Rigs to Investigate Fluid

Flow and Heat Transfer in a Stirling Engine Heater Head

Technical Paper Publication. IMECE2018-86378

Pawan Yadav, Songgang Qiu, Koji Yanaga,

West Virginia

University, Morgantown, WV, United States

10:21am – Power Flow Topology of Supercritical Carbon

Dioxide Power Generation System and Its Application in

Modeling and Optimization

Technical Paper Publication. IMECE2018-87272

Qun Chen, Xia Li, Xi Chen,

Tsinghua University, Beijing, China

10:42am – Improvement in Thermal Efﬁciency of a Fuel

Reforming Engine System Using Low Concentration

Hydrous Ethanol

Technical Presentation. IMECE2018-87402

Yuzo Shirakawa, Atsushi Shiamda, Takao Ishikawa,

Hitachi,

Ltd., Ibaraki, Japan,

Toshio Shudo,

Tokyo Metropolitan

University, Tokyo, Japan

11:03am – Lean-Burn Characteristics of a Heavy-Duty

Diesel Engine Retroﬁtted to Natural Gas Spark Ignition

Technical Paper Publication. IMECE2018-87761

Jinlong Liu, Cosmin Dumitrescu,

West Virginia University,

Morgantown, WV, United States

11:24am – Effect of Piston Crevices on 3D Simulation of a

Heavy-Duty Diesel Engine Retroﬁtted to Natural Gas Spark

Ignition

Technical Paper Publication. IMECE2018-87783

Iolanda Stocchi,

University of Perugia, Morgantown, WV,

United States,

Jinlong Liu, Cosmin Dumitrescu,

West

Virginia University, Morgantown, WV, United States,

Michele Battistoni, Carlo N. Grimaldi,

University of Perugia,

Perugia, Italy

8-10 RENEWABLE ENERGY

8-10-3 Advanced Technologies for Ocean Energy

Third Floor, David L. Lawrence Convention Center, Room 318

10:00am–11:45am

Session Chair: Navid Goudarzi,

UNCC, Charlotte, NC, United

States

10:00am – Gyroscopic Wave Energy Generator for Fish

Farms and Rigs

Technical Paper Publication. IMECE2018-86188

Alexandra Norbach,

Western Norway University of Applied

Sciences, Ågotnes, Norway,

Kotryna Bedrovaite Fjetland,

Western Norway University of Applied Sciences, Kverneland,

Norway,

Gina Hestetun, Thomas Impelluso,

Western Norway

University of Applied Sciences, Bergen, Bergen, Norway

10:21am – River Turbines Controlled by Mechanical Speed

Converters

Technical Paper Publication. IMECE2018-88417

Navid Goudarzi,

UNCC, Charlotte, NC, United States,

Kyung

Soo Han,

DDMotion, Owings Mills, MD, United States

10:42am – Design and Optimization of a Tidal Turbine and

Farm

Technical Paper Publication. IMECE2018-86264

Mohammed Mayeed,

Kennesaw State University, Marietta,

GA, United States

11:03am – Effect of Oscillating Water Column Chamber

Inclination on the Performance of a Savonius Rotor

Technical Paper Publication. IMECE2018-87313

Deepak Prasad, Mohammed Ra

ﬁuddin Ahmed,

University of

the South Pacic, Suva, Fiji,

Young-Ho Lee,

Korea Maritime

and Ocean University, Busan, Korea (Republic)

11:24am – An Energy Harvester for Kuroshio Power

Technical Presentation. IMECE2018-88870

Bang-Fuh Chen, Shang-Yu Tsai, Wei-Ren Chen,

National

Sun Yat-Sen University, Kaohsiung, Taiwan

8-11 ELECTROCHEMICAL ENERGY

CONVERSION AND STORAGE

8-11-4 Thermal Aspects of Li-ion Batteries

Third Floor, David L. Lawrence Convention Center, Room 317

10:00am–11:45am

Session Chair: Dervis Demirocak,

Texas A&M University-

Kingsville, Kingsville, TX, United States

10:00am – Effect of Thermal Gradient on Lithium

Electrodeposition

Technical Presentation. IMECE2018-87621

Conner Fear,

Purdue University, Lafayette, IN, United States

TRACK  ENERGY

–

TUESDAY, NOVEMBER 

10:21am – A Hybrid Thermal Management System With

Negative Parasitic Losses for Electric Vehicle Battery

Packs

Technical Paper Publication. IMECE2018-86111

Shashank Arora, Kari Tammi,

Aalto University, Espoo, Finland

10:42am – A Novel Technique for Estimation of the Solid

Electrolyte Interphase Film Resistance for Li-Ion Batteries

Technical Paper Publication. IMECE2018-87311

Shashank Arora,

Aalto University, Espoo, Finland

11:03am – Low-Temperature Energy Efﬁciency of Lithium-

Ion Batteries

Technical Paper Publication. IMECE2018-86582

Ashkan Nazari,

Virginia Tech, Blacksburg, VA, United States,

Roja Esmaeeli, Seyed Reza Hashemi, Haniph

Aliniagerdroudbari, Siamak Farhad,

University of Akron,

Akron, OH, United States

8-2 FUNDAMENTALS AND APPLICATIONS

OF THERMODYNAMICS

8-2-4 On Entropy and Irreversibilities’ Minimization

Third Floor, David L. Lawrence Convention Center, Room 311

1:45pm–3:30pm

Session Chair: Tatiana Morosuk,

Technical University Berlin,

Berlin, Germany

Session Co-Chair: Michael Nitsas,

National Technical

University of Athens, Zografou, Greece

1:45pm – An Easier Approach to Introduce Entropy in

Undergraduate Thermodynamics Classes

Technical Paper Publication. IMECE2018-86510

Yousef Haseli,

Central Michigan University, MT Pleasant, MI,

United States

2:06pm – Exergy Analysis of a Machining Operation Using

Finite Element (FE) Assisted Simulations

Technical Paper Publication. IMECE2018-88494

Mohamed

Gadalla,

American University of Sharjah, Sharjah,

United Arab Emir.,

Salman Pervaiz,

Rochester Institute of

Technology - Dubai, Dubai, Dubai, United Arab Emir.

2:27pm – Entropy Generation Minimization for Energy-

Efﬁcient Desalination

Technical Paper Publication. IMECE2018-88543

John Lienhard V,

Massachusetts Institute of Technology,

Cambridge, MA, United States

2:48pm – Spontaneous Violations of the Second Law of

Thermodynamics, Nanoscale Fluid Mechanics, and

Poromechanics

Technical Presentation. IMECE2018-88826

Martin Ostoja-Starzewski,

University of Illinois at Urbana-

Champaign, Urbana, IL, United States

3:09pm – Generalized Thermodynamic Dynamic-

Optimization of Irreversible Processes

Technical Presentation. IMECE2018-88893

Lingen Chen,

Naval University of Engineering, Wuhan, China

8-4 DESIGN AND ANALYSIS OF ENERGY

CONVERSION SYSTEMS

8-4-5 Design and Analysis of Energy Systems – 1

Third Floor, David L. Lawrence Convention Center, Room 316

1:45pm–3:30pm

Session Chair: Auteliano A. Santos,

Universidade Estadual de

Campinas, Campinas, SP, Brazil

Session Co-Chair: Roberto Carapellucci,

University of

L’Aquila, L’Aquila, IT, Italy

1:45pm – Ecological Optimization for an Endoreversible

Chemical Pump With Three Mass Reservoirs

Technical Paper Publication. IMECE2018-86250

Lingen Chen, DAn Xia, Huijun Feng, Shaojun Xia,

Naval

University of Engineering, Wuhan, China

2:06pm – Mechanical Design of Magnetic Gearboxes

Optimized for Assembly

Technical Paper Publication. IMECE2018-86878

Sina Modaresahmadi, Casey Nichols, Wesley Williams,

University of North Carolina at Charlotte, Charlotte, NC, United

States

2:27pm – Design of a Ducted Cross-Flow Turbine for

Marine Current Energy Extraction

Technical Paper Publication. IMECE2018-87324

Jai N. Goundar, Deepak Prasad, Mohammed Raﬁuddin

Ahmed,

University of the South Pacic, Suva, Fiji

2:48pm – Vibration Energy Harvesting to Power Ultrasonic

Sensors in Heavy Haul Railway Cars

Technical Paper Publication. IMECE2018-87836

Auteliano A. Santos, Matheus V. Lopes, Vanessa V.

Goncalves, Jony Eckert,

University of Campinas, Campinas,

SP, Brazil,

Thiago S. Martins,

VALE S.A., Vitoria, ES, Espirito

Santo, Brazil

3:09pm – Reverberatory Furnace CFD Modeling for

Efﬁcient Design: Burners and Chimney Location

Technical Paper Publication. IMECE2018-87843

Mohamed Ali, Saeed Alshehhi,

Khalifa University of Science

and Technology, Masdar City, Abu Dhabi, United Arab Emir.

TRACK  ENERGY

–

TUESDAY, NOVEMBER 

8-10 RENEWABLE ENERGY

8-10-4 AdvancedTechnologies for Wind Energy II

Third Floor, David L. Lawrence Convention Center, Room 318

1:45pm–3:30pm

Session Chair: Navid Goudarzi,

UNCC, Charlotte, NC, United

States

Session Co-Chair: Christopher Depcik,

University of Kansas,

Lawrence, KS, United States

1:45pm – Self-Excited Induction Generator (SEIG) for

Hydrogen and Ammonia C-Free Fuel Production Without

Electricity Grid Connection

Technical Presentation. IMECE2018-87527

William Leighty, The Leighty Foundation, Juneau, AK,

United States, Eduard Muljadi,

Auburn University, Auburn,

AL, United States

2:06pm – CFD Analysis of a Cross-Flow Turbine for Wind

and Hydrokinetic Applications

Technical Paper Publication. IMECE2018-88469

Arian Hosseini,

KTH Royal Institute of Technology, Stockholm,

Sweden,

Navid Goudarzi,

UNCC, Charlotte, NC, United States

2:27pm – Wind Energy Assessment of Michigan City, United

States

Technical Paper Publication. IMECE2018-88412

Michael Okorie, Uzumma O. Ozeh, Xiuling Wang,

Purdue

University Northwest, Hammond, Armenia

2:48pm – The Value of Energy Flexibility: Integrating Wind

Resources in New York State

Technical Paper Publication. IMECE2018-87521

Terence Conlon, Vijay Modi, Michael Waite,

Columbia

University, New York, NY, United States

8-11 ELECTROCHEMICAL ENERGY

CONVERSION AND STORAGE

8-11-5 Beyond Li-ion Batteries

Third Floor, David L. Lawrence Convention Center, Room 317

1:45pm–3:30pm

Session Chair: Dervis Demirocak,

Texas A&M University-

Kingsville, Kingsville, TX, United States

1:45pm – Development of a Membraneless Organic Redox

Flow Battery

Technical Paper Publication. IMECE2018-88024

Korey Cook, Andre Benard,

Michigan State University,

East Lansing, MI, United States,

Tom Guarr, Shane Mann,

Michigan State University Bioeconomy Institute, Holland, MI,

United States,

Ethan Lau, Jordan Thayer,

Michigan State

University, East Lansing, MI, United States

2:06pm – CNT Reinforced Polymer Nanocomposites for

Thermochemical Energy Conversion and Storage

Technical Presentation. IMECE2018-89525

Oluwafunmilola Ola, Yanqiu Zhu,

University of Exeter, Exeter,

United Kingdom

2:27pm – Robust Nitrogen-Doped Graphene on Metal

Reduced Organic Framework Catalyst for Oxygen

Reduction Reactions

Technical Presentation. IMECE2018-88936

Harsimranjit Singh, Eon Soo Lee, Bharath Babu Nunna,

Ashok Pullamsetty,

New Jersey Institute of Technology,

Newark, NJ, United States

2:48pm – The Effect of Nanoscale Architecture on Ionic

Diffusion in rGO/Aramid Nanoﬁber Structural Electrodes

for Supercapacitors

Technical Presentation. IMECE2018-88911

Sarah Aderyani, Haleh Ardebili,

University of Houston,

Houston, TX, United States

3:09pm – Improving Oil and Gas Operations by Integration

of Solid Oxide Fuel Cells in a Sustainable Manner

Technical Presentation. IMECE2018-88919

Khalid Al-Khori, Yusuf Bicer, Muammer Koc, Hamad Bin

Khalifa University, Doha, Qatar

8-14 NUCLEAR POWER PLANTS: DESIGN,

ANALYSIS, AND SAFETY

8-14-1 Nuclear Power Plants: Design, Analysis, and

Safety

Third Floor, David L. Lawrence Convention Center, Room 315

1:45pm–3:30pm

Session Chair: Jovica Riznic,

Canadian Nuclear Safety

Commission, Ottawa, ON, Canada

Session Co-Chairs: Hakan Ozaltun, Grant Hawkes,

Idaho

National Laboratory, Idaho Falls, ID, United States

1:45pm – Probabilistic Properties of Steel for Nuclear

Piping

Technical Paper Publication. IMECE2018-87054

Kleio Avrithi,

University of Houston - Downtown, Houston, TX,

United States

2:00pm – Thermal Transport in Defective Actinide Oxides

Technical Paper Publication. IMECE2018-87605

Alex Resnick, Katherine Mitchell, Jungkyu Park, Hannah

Maier, Eduardo Farfan, Tien Yee, Christian Velasquez,

Kennesaw State University, Marietta, GA, United States

2:15pm – Thermo-Hydro-Chemo-Mechanical Modeling of

Bentonite Extrusion in the Near Borehole Crack

Technical Presentation. IMECE2018-87944

Mohammad Islam,

National Energy Technology Laboratory,

Pittsburgh, PA, United States

2:30pm – Thermal Model of the AGR-5/6/7 Experiment

Technical Presentation. IMECE2018-88628

Grant Hawkes,

Idaho National Laboratory, Idaho Falls, ID,

United States

TRACK  ENERGY

–

TUESDAY, NOVEMBER 

2:45pm – Numerical Simulation of Sub-Cooled Water

Flashing Flow From Nuclear Steam Generator Secondary

Side Through Broken Feed Water Pipes

Technical Presentation. IMECE2018-88849

Jong Chull Jo,

Pusan National University/Korea Institute of

Nuclear Safety, Busan, Korea (Republic),

Jae Jun Jeong,

Byong Jo Yun,

Pusan National University, Busan, Korea

(Republic),

Soon-ho Kang,

Korea Institute of Nuclear Safety,

Daejon, Korea (Republic)

3:00pm – Thermo-Mechanical Performance Assessment of

Selected Plates From MP-1 Low Power Experiments

Technical Paper Publication. IMECE2018-86010

Hakan Ozaltun, Barry H. Rabin,

Idaho National Laboratory,

Idaho Falls, ID, United States

8-3 THERMOECONOMICS

8-3-1 Thermoeconomics

Third Floor, David L. Lawrence Convention Center, Room 317

3:45pm–5:30pm

Session Chair: Vittorio Verda,

Politecnico di Torino, Torino,

Italy

3:45pm – Thermoeconomic Analysis of Reverse Brayton

Cycle Based Cryocooler

Technical Paper Publication. IMECE2018-87190

Aman Kumar Dhillon, Parthasarathi Ghosh,

Indian Institute

of Technology Kharagpur, Kharagpur, West Bengal, India

4:06pm – Ground Level Integrated Diverse Energy Storage

(GLIDES) Cost Analysis

Technical Paper Publication. IMECE2018-87517

Saiid Kassaee,

University of Tennessee, Knoxville, TN, United

States,

Adewale Odukomaiya,

Oak Ridge National

Laboratory/Georgia Tech, Oak Ridge, TN, United States,

Ahmad Abu-Heiba, Xiaobing Liu,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States,

Matthew M.

Mench,

University of Tennessee, Knoxville, TN, United States,

Patrick W. O’Connor, Ayyoub M. Momen,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States

4:27pm – Exergoeconomic Analysis Applied to a Novel

Concept of Integrated Solar Combined Cycle

Technical Presentation. IMECE2018-87596

Tatiana Morosuk, Louay Elmorsy, George Tsatsaronis,

Technical University of Berlin, Berlin, Germany

4:48pm – MED-MVC Systems: Exergy and Thermo-

Economic Analysis Approach

Technical Presentation. IMECE2018-88361

Mohamed L. Elsayed,

University of Central Florida, Orlando,

FL, United States,

Osama Mesalhy,

Zagazig University,

Zagazig, Sharkia, Egypt,

Ramy Mohammed, Louis Chow,

University of Central Florida, Orlando, FL, United States

5:09pm – Exergoeconomic Analysis of Intercooled,

Reheated and Recuperated Gas Turbine Cycles With Air

Film Blade Cooling

Technical Paper Publication. IMECE2018-88483

Mohamed Gadalla, Waleed El-Damaty,

American University

of Sharjah, Sharjah, United Arab Emir.

8-4 DESIGN AND ANALYSIS OF ENERGY

CONVERSION SYSTEMS

8-4-6 Design and Analysis of Energy Systems – 2

Third Floor, David L. Lawrence Convention Center, Room 316

3:45pm–5:30pm

Session Chair: Yousef Haseli,

Central Michigan University, MT

Pleasant, MI, United States

Session Co-Chair: Roberto Carapellucci,

University of

L’Aquila, L’Aquila, IT, Italy

3:45pm – Speciﬁc Entropy Generation: A Measure of

Inefﬁciencies in Power Plants

Technical Presentation. IMECE2018-88730

Yousef Haseli,

Central Michigan University, MT Pleasant, MI,

United States

4:06pm – A Novel Silica-Gel/Foam Packed Bed for

Adsorption Cooling Applications

Technical Presentation. IMECE2018-88913

Ramy Mohammed,

University of Central Florida, Orlando, FL,

United States,

Osama Mesalhy,

Zagazig University, Zagazig,

Sharkia, Egypt,

Mohamed L. Elsayed, Louis Chow,

University

of Central Florida, Orlando, FL, United States

4:27pm – Development of Dynamic Model for Mechanical

Vapor Recompression System Simulation

Technical Presentation. IMECE2018-89124

Le Wang,

Hefei General Machinery Research Institute Co. Ltd.,

Hefei, China,

Guangbin Liu,

Qingdao University of Science

and Technology, Qingdao, China,

Jun Xiao,

Hefei General

Machinery Research Institute Co. Ltd., Hefei, China

4:48pm – Studying the Degradation of Platinum Based

Proton Exchange Membrane Fuel Cells Using the

Nanoscale X-Ray Computed Tomography Method

Technical Presentation. IMECE2018-89572

Jonathan Braaten, Shohei Ogawa,

Carnegie Mellon

University, Pittsburgh, PA, United States,

Venkata Yarlagadda,

General Motors/University of Michigan, Ann Arbor, MI, United

States,

Anusorn Kongkanand,

General Motors Company, Fuel

Cell Activities, Pontiac, MI, United States,

Shawn Litster,

Carnegie Mellon University, Pittsburgh, PA, United States

TRACK  ENERGY

–

TUESDAY, NOVEMBER 

100

8-7 THERMAL ENERGY STORAGE

8-7-1 Thermal Energy Storage—Devices I

Third Floor, David L. Lawrence Convention Center, Room 315

3:45pm–5:30pm

Session Chair: Adriano Sciacovelli,

University of Birmingham,

Birmingham, United Kingdom

3:45pm – Longer Passage of Airﬂow in Multiple Packed-

Bed Thin Tanks Versus in a Short Big Tank for Improved

Thermal Storage Performance

Technical Paper Publication. IMECE2018-86123

Yan Wang,

Institute of Electrical Engineering, Chinese

Academy of Sciences, Beijing, China,

Peiwen Li,

University of

Arizona, Tucson, AZ, United States,

Zhifeng Wang, Bei Yang,

Guofeng Yuan,

Institute of Electrical Engineering, Chinese

Academy of Sciences, Beijing, China,

Wenxun Tang,

Guangdong Five Star Solar Energy, Dongguan, China

4:06pm – Design and Integration of High Temperature

Latent Heat Thermal Energy Storage for High Power Levels

Technical Paper Publication. IMECE2018-86281

Maike Johnson,

German Aerospace Center (DLR), Stuttgart,

Germany,

Bernd Hachmann,

F. W. Brökelmann Aluminiumwerk

GmbH & Co. KG, Ense, Germany,

Andreas J. Dengel,

Steag

New Energies GmbH, Saarbruecken, Germany,

Michael Fiß,

Matthias Hempel, Dan Bauer,

German Aerospace Center

(DLR), Stuttgart, Germany

4:27pm – Numerical Study of High Temperature

Thermochemical Energy Storage Using Co

/CoO

Technical Paper Publication. IMECE2018-86329

Nasser Vahedi, Qasim A. Ranjha, Alparslan Oztekin,

Lehigh University, Bethlehem, PA, United States

4:48pm – Analytical and Computational Thermal Analysis

of a Latent Heat Storage and Cooling System (LHSCS)

Technical Presentation. IMECE2018-86565

Francisco Montero, Mario Di Capua, Amador Guzmán,

Ponticia Universidad Católica de Chile, Santiago, Chile,

Daming Chen, Loreto Canales,

Ponticia Universidad

Catolica de Chile, Macul, Region Metropolitana, Chile

8-8 ENVIRONMENTAL ASPECTS OF

ENERGY SYSTEMS

8-8-1 Environmental Aspects of Energy Systems

Third Floor, David L. Lawrence Convention Center, Room 311

3:45pm–5:30pm

Session Chair: Angel D. Ramirez,

Escuela Superior Politécnica

del Litoral, Guayaquil, Guayas, Ecuador

Session Co-Chair: Elisa Guelpa,

Politecnico di Torino, Torino,

Italy

3:45pm – Modelling Produced Water Re-Injection Scaling

Compability Performance in Matured Hydrocarbon Aquifer,

Nigeria

Technical Paper Publication. IMECE2018-86126

Kingsley Abhulimen, Theophilus. A. Fashanu,

University of

Lagos, Nigeria, Nigeria,

Peter Idialu,

Department of System

Engineering, Lagos, Nigeria

4:06pm – Some Studies on NOX Reduction From a Diesel

Engine Using Stabilized Emulsion

Technical Paper Publication. IMECE2018-87374

Naveen Kumar,

Delhi Technological University, Delhi, Delhi,

India,

Harveer Singh Pali,

JSS Academy of Technical

Education, Noida, UP, India,

SIdharth Bansal,

MAIT, New

Delhi, Delhi, India

4:27pm – Mitigation of Greenhouse Gas Emissions Through

the Shift From Fossil Fuels to Electricity in the Mass

Transport System in Guayaquil, Ecuador

Technical Paper Publication. IMECE2018-87732

Angel D. Ramirez, Danilo Arcentales, Andrea J. Boero,

Escuela Superior Politecnica del Litoral, Guayaquil, Guayas,

Ecuador

4:48pm – Water Recovery in Cooling Towers

Technical Presentation. IMECE2018-88687

Maher Damak, Karim Khalil, Kripa Varanasi,

Massachusetts

Institute of Technology, Cambridge, MA, United States

5:09pm – Life-Cycle-Analysis of Novel Heat Exchanger for

Dry Cooling of Power Plants Based on Encapsulated Phase

Change Materials

Technical Presentation. IMECE2018-89633

Lige Zhang, Swanand Bhagwat, Sabrina Spatari, Ying Sun,

Drexel University, Philadelphia, PA, United States

TRACK  ENERGY

–

TUESDAY, NOVEMBER 

101

8-10 RENEWABLE ENERGY

8-10-5 AdvancedTechnologies for Solar Energy II

Third Floor, David L. Lawrence Convention Center, Room 318

3:45pm–5:30pm

Session Chair: Christopher Depcik,

University of Kansas,

Lawrence, KS, United States

Session Co-Chair: Navid Goudarzi,

UNCC, Charlotte, NC,

United States

3:45pm – Development of a Low Cost Self-Sustaining Water

Distillation System Using Activated Carbon Nanoﬂuids

Technical Paper Publication. IMECE2018-86906

Ashreet Mishra,

Purdue University Northwest, Hammond, IN,

United States,

A.G. Agwu Nnanna,

University of Texas of the

Permian Basin, Odessa, TX, United States

4:06pm – Design and Testing of a Solar-Driven Wastewater

Treatment Unit for Off-Grid Applications

Technical Paper Publication. IMECE2018-87090

Reza Baghaei Lakeh,

California State Polytechnic University,

Pomona, Pomona, CA, United States,

Daniel Andrade,

California State Polytechnic University, Pomona, Los Angeles,

CA, United States,

Kyle Miller, Mohammad Modabernia,

Thuan Nguyen, Elbon Flanagan, Johnny Baradii, John Kest,

David Jacobo, Justine Nguyen, Laura Lopez, Binh Phun,

California State Polytechnic University, Pomona, Pomona, CA,

United States,

Saied Delagah,

U.S. Bureau of Reclamation,

Denver, CO, United States,

Mohammadali Sharbatmaleki,

California State Polytechnic University, Pomona, Pomona, CA,

United States

4:27pm – Numerical Study of Nanoﬂuid-Based Solar

Collector for Humidiﬁcation-Dehumidiﬁcation (HDH)

Desalination

Technical Paper Publication. IMECE2018-87318

Kapil Garg,

Indian Institute of Technology Ropar, Rupnagar,

PB, Punjab, India,

Vikrant Khullar,

Thapar Institute of

Engineering and Technology, Patiala, India, Patiala, Pujab,

India,

Sarit Kumar Das, Himanshu Tyagi,

Indian Institute of

Technology Ropar, Rupnagar, PB, Punjab, India

4:48pm – Performances Investigation of a SOFC-Based

Distributed Energy System Integrated With Solar

Thermochemical Process

Technical Presentation. IMECE2018-88392

Taixiu Liu, Qibin Liu,

Institute of Engineering Thermophysics,

Chinese Academy of Sciences, Beijing, China,

Jing Lei,

North

China Electric Power University, Beijing, China,

Jun Sui,

Hongguang Jin,

Institute of Engineering Thermophysics,

Chinese Academy of Sciences, Beijing, Beijing, China

WEDNESDAY, NOVEMBER 14

8-7 THERMAL ENERGY STORAGE

8-7-2 Thermal Energy Storage—Materials

Third Floor, David L. Lawrence Convention Center, Room 323

10:00am–11:45am

Session Chair: Maike Johnson,

German Aerospace Center

(DLR), Stuttgart, Germany

Session Co-Chair: Adriano Sciacovelli,

University of

Birmingham, Birmingham, United Kingdom

10:00am – The Origin of Hydrophilic Surface

Functionalization-Induced Thermal Conductance

Enhancement across Solid-Water Interfaces

Technical Presentation. IMECE2018-86409

Dezhao Huang, Ruimin Ma,

University of Notre Dame, South

Bend, IN, United States,

Tengfei Luo,

University of Notre

Dame, Notre Dame, IN, United States,

Teng Zhang,

Schrodinger Inc., New York, NY, United States

10:21am – Experimental Study of Hygroscopy of Single and

Different Mixtures of MgCl

, KCl, NaCl, ZnCl

for

Application as Heat Transfer Fluids in CSP

Technical Paper Publication. IMECE2018-86416

Xiaoxin Wang, Qichao Hu, Xiankun Xu, Peiwen Li, Gil-Pyo

Kim,

Dominic Gervasio,

University of Arizona, Tucson, AZ,

United States

10:42am – Thermal Analysis of a High-Temperature Heat

Pipe-Assisted Thermal Energy Storage System With Nano-

Enhanced Phase Change Material

Technical Paper Publication. IMECE2018-86481

Saeed Tiari, Mahboobe Mahdavi, Virensinh Thakore, Stacy

Joseph,

Gannon University, Erie, PA, United States

11:03am – Non-Isothermal Phase Change Behaviors of

Binary Mixtures of D-Dulcitol and Pentaerythritol as Novel

Heat Storage Materials

Technical Paper Publication. IMECE2018-87643

Xuefeng Shao, Jun Wang, Liwu Fan,

Zhejiang University,

Hangzhou, Zhejiang, China

11:24am – Atomistic Modelling and Experimental

Characterization of Water Sorption Onto

Silicoaluminophosphate Zeolites for Low Temperature

Thermal Storage Applications

Technical Presentation. IMECE2018-89000

Eliodoro Chiavazzo, Matteo Fasano, Gabriele Falciani,

Politecnico di Torino, Torino, Italy,

Vincenza Brancato,

CNR -

Istituto di Tecnologie Avanzate per l’Energia “Nicola Giordano,”

Messina, Italy,

Valeria Palomba,

Università di Messina,

Messina, Italy,

Pietro Asinari,

Politecnico di Torino, Torino,

Italy,

Andrea Frazzica,

CNR - Istituto di Tecnologie Avanzate

per l’Energia “Nicola Giordano,” Messina, Italy

TRACK  ENERGY

–

TUESDAY, NOVEMBER  / WEDNESDAY, NOVEMBER 

102

8-9 ENERGY SYSTEMS FOR BUILDINGS

8-9-1 Cooling Technologies

Third Floor, David L. Lawrence Convention Center, Room 319

10:00am–11:45am

Session Chair: Yunho Hwang,

University of Maryland, College

Park, MD, United States

10:00am – Thermal Performance of Earth-Air Heat

Exchanger Systems for Cooling Applications in Residential

Buildings

Technical Paper Publication. IMECE2018-86974

Fadi Ghaith,

Heriot Watt University Dubai Campus, Dubai,

United Arab Emir.,

Habib Ur Razzaq,

Heriot Watt University,

Dubai, United Arab Emir.

10:21am – Using Adsorption Cooling and Thermal Solar

Collection for Residential Cooling Applications in Canada

Technical Paper Publication. IMECE2018-87246

Jordan McNally, Christopher Baldwin, Cynthia A.

Cruickshank,

Carleton University, Ottawa, ON, Canada

10:42am – Thermal Modeling of a Building Integrated

Radiative Cooler for Space Cooling Applications

Technical Paper Publication. IMECE2018-87456

Ravita Lamba,

Indian Institute of Technology Delhi, New Delhi,

Delhi, India,

Mehdi Zeyghami, David Young, D. Yogi

Goswami,

University of South Florida, Tampa, FL, United

States,

S.C. Kaushik,

Indian Institute of Technology Delhi, New

Delhi, New Delhi, India

11:03am – Economical and Non-Invasive Residential

Human Presence Sensing via Temperature Measurement

Technical Paper Publication. IMECE2018-88211

Chenli Wang, Hohyun Lee,

Santa Clara University, Santa

Clara, CA, United States

11:24am – Neural Network Based Bin Analysis for

Indirect/Direct Evaporative Cooling of Modular Data

Centers

Technical Paper Publication. IMECE2018-88502

Abhishek Uday Walekar, Ashwin Siddarth,

University of

Texas at Arlington, Arlington, TX, United States,

Abhishek

Guhe,

Mestex, A Division of Mestek Inc., Dallas, TX, United

States,

Nikita R. Sukthankar, Dereje Agonafer,

University of

Texas at Arlington, Arlington, TX, United States

8-10 RENEWABLE ENERGY

8-10-6 Energy Storage, Energy Harvesting, and

Electric Cars

Third Floor, David L. Lawrence Convention Center, Room 325

10:00am–11:45am

Session Chair: Emrah Celik,

University of Miami, Pinecrest, FL,

United States

10:00am – Increasing Energy Efﬁciency in Vehicles by

Harvesting Wasted Engine Heat

Technical Paper Publication. IMECE2018-88253

Emrah Celik,

University of Miami, Pinecrest, FL, United States,

Mutabe Aljaghtham,

University of Miami, Miami, FL, United

States

10:21am – Enhancement of Thermoelectric Figure of Merit

of Bi

Using Carbon Dots

Technical Paper Publication. IMECE2018-88280

Emrah Celik,

University of Miami, Pinecrest, FL, United States,

Cagri Oztan,

University of Miami, Coral Gables, FL, United

States,

Yiqun Zhou, Roger LeBlanc,

University of Miami,

Miami, FL, United States,

Sedat Ballikaya, Oguz Genc,

Istanbul University, Istanbul, Turkey

10:42am – Design and Fabrication of Three Stages Solar

Still With Two Focal Concentric Collectors

Technical Presentation. IMECE2018-89027

Fayadh Abed, Khalil Farhan, Muhammad Eleiwi,

Tikrit

University, Tikrit, SalahAdeen, Iraq

11:03am – Evaluation of Thermal Energy Storage (TES)

Systems on Thermo-Economic Characteristics of PTSC

Solar-Based Power Generation Plants

Technical Paper Publication. IMECE2018-88477

Mohamed Gadalla, Adnan Alashkar,

American University of

Sharjah, Sharjah, United Arab Emir.

11:24am – Magnets for Tommorow

Technical Presentation. IMECE2018-89047

Anish B. Soman, Balendu Divakar,

SCMS School of

Engineering and Technology, Ernakulam, Kerala, Kerala, India,

Anoop Anilkumar, Soorya Nath K.U.,

SCMS School of

Engineering and Technology, Kerala, Kerala, India

TRACK  ENERGY

–

WEDNESDAY, NOVEMBER 

103

8-12 FUEL CELL SYSTEMS DESIGN AND

APPLICATIONS

8-12-1 PEM Fuel Cells – I

Third Floor, David L. Lawrence Convention Center, Room 324

10:00am–11:45am

Session Chair: Dervis Demirocak,

Texas A&M University-

Kingsville, Kingsville, TX, United States

10:00am – Investigation of Cell Reversal of Polymer

Electrolyte Fuel Cells in Freezing Conditions

Technical Presentation. IMECE2018-89394

Leiming Hu,

Carnegie Mellon University, Pittsburgh, PA, United

States,

Bo Ki Hong, Jong-Gil Oh,

Hyundai Motor Company,

Yongin-si, Gyeonggi-do, Korea (Republic),

Shawn Litster,

Carnegie Mellon University, Pittsburgh, PA, United States

10:21am – Electrode and Membrane Development for Anion

Exchange Membrane Fuel Cells

Technical Presentation. IMECE2018-89428

Dylan Ritter, Leiming Hu, Megan Treichel, Tyler Womble,

Kevin Noonan, Shawn Litster,

Carnegie Mellon University,

Pittsburgh, PA, United States

10:42am – Enhanced Water Management for Platinum

Group Metal-Free Polymer Electrolyte Fuel Cells by

Engineered Gas Diffusion Layers

Technical Presentation. IMECE2018-89565

Lisa Langhorst, Aman Uddin,

Carnegie Mellon University,

Pittsburgh, PA, United States,

Hanguang Zhang, Gang Wu,

University at Buffalo, State University of New York, Buffalo, NY,

United States,

Shawn Litster,

Carnegie Mellon University,

Pittsburgh, PA, United States

11:03am – Structural Analysis of MEA Considering Catalyst

Layer Microstructure

Technical Presentation. IMECE2018-87385

Tomaru Ogawa, Norio Saito, Shinichi Takahashi, Atsushi

Ohma,

Nissan Motor Co., Ltd., Yokosuka, Kanagawa, Japan

11:24am – Nonequilibrium Thermodynamics Explains

Thermal Osmosis in PEM Fuel Cells

Technical Presentation. IMECE2018-87853

Nicholas Ingarra, Xia Wang,

Oakland University, Rochester,

MI, United States

8-7 THERMAL ENERGY STORAGE

8-7-3 Thermal Energy Storage—Devices II

Third Floor, David L. Lawrence Convention Center, Room 323

1:45pm–3:30pm

Session Chair: Adriano Sciacovelli,

University of Birmingham,

Birmingham, United Kingdom

Session Co-Chair: Maike Johnson,

German Aerospace Center

(DLR), Stuttgart, Germany

1:45pm – Heat Transfer Analysis of a Low-Temperature

Heat Pipe-Assisted Latent Heat Thermal Energy Storage

System With Nano-Enhanced PCM

Technical Paper Publication. IMECE2018-86609

Mahboobe Mahdavi, Saeed Tiari, Vivek Pawar,

Gannon

University, Erie, PA, United States

2:06pm – Experimental and Numerical Study on Melting of

Solar Salt in a Finned Metallic Container

Technical Paper Publication. IMECE2018-88072

Sol-Carolina Costa, Khamid Mahkamov, Murat Kenisarin,

Mohammad Ismail,

Northumbria University, Newcastle upon

Tyne, United Kingdom,

Elvedin Halimic, David Mullen, Kevin

Lynn, Thomas Werner,

Aavid Thermacore Europe Ltd.,

Ashington, United Kingdom

2:27pm – Layout of Phase Change Materials in a Thermal

Energy Storage System

Technical Paper Publication. IMECE2018-88636

Habeeb Ur Rahman Khan, Taha Aldoss, Muhammad

Rahman,

Wichita State University, Wichita, KS, United States

2:48pm – Numerical Investigation of Thermal Performance

for Plate Type PCM Thermal Storage Unit

Technical Paper Publication. IMECE2018-88667

Chen Mengdong, Yang Cenyu, Jin Yi, Hu Xiao

Global

Energy Interconnection Research Institute, Beijing, China

8-9 ENERGY SYSTEMS FOR BUILDINGS

8-9-2 Building Energy Generation

Third Floor, David L. Lawrence Convention Center, Room 319

1:45pm–3:30pm

Session Chair: Sayed M. Metwalli,

Cairo University, Cairo,

Egypt

1:45pm – Energy Demand, Efﬁciency Measures and

Embodied Energy in the Italian Residential Sector

Technical Paper Publication. IMECE2018-86400

Sara Abd Alla, Vincenzo Bianco, Scarpa Federico, Luca

Tagliaﬁco,

University of Genoa, Genoa, Italy

2:06pm – Feasibility Analysis of Distributed Generation

System for Large University Campus

Technical Paper Publication. IMECE2018-86477

Amy Allen, Moncef Krarti,

University of Colorado Boulder

Boulder, CO, United States

TRACK  ENERGY

–

WEDNESDAY, NOVEMBER 

104

2:27pm – Evaluation of Optimal Designs for Hybrid

Renewable Energy Systems Speciﬁc to Residential

Communities in Saudi Arabia

Technical Paper Publication. IMECE2018-88090

Ammar H.A. Dehwah, Moncef Krarti,

University of Colorado

Boulder, Boulder, CO, United States

2:48pm – Potential Aggregate Effects of Net-Zero Energy

Homes (NZEHs) With Distributed Energy Generation on the

U.S. Electrical Grid

Technical Paper Publication. IMECE2018-88359

Dongsu Kim, Heejin Cho, Rogelio Luck, Pedro Mago,

Mississippi State University, Mississippi State, MS, United

States

3:09pm – Towards Net-Zero Energy Buildings: A Case

Study in Humid Subtropical Climate

Technical Paper Publication. IMECE2018-88518

Owen G. Betharte, Hamidreza Najaﬁ, Troy Nguyen,

Florida

Institute of Technology, Melbourne, FL, United States

8-10 RENEWABLE ENERGY

8-10-7 Biomass, Geothermal, and Small-Scale

Generation

Third Floor, David L. Lawrence Convention Center, Room 325

1:45pm–3:30pm

Session Chair: Navid Goudarzi,

UNCC, Charlotte, NC, United

States

Session Co-Chair: Lea-Der Chen,

Texas A&M University-

Corpus Christi, Corpus Christi, TX, United States

1:45pm – Radiative Transport and Hydrodynamic Modeling

of Microalgae Photosynthesis in Bio-Flow Reactors

Technical Paper Publication. IMECE2018-87116

Lea Der Chen,

Texas A&M University - Corpus Christi, Corpus

Christi, TX, United States

2:06pm – Hot Surface Ignition Properties of Jet-A/Canola

Methyl Ester Blends in a Constant Volume Chamber

Technical Paper Publication. IMECE2018-87544

Bach Duong,

University of Oklahoma, Norman, OK, United

States,

Ramkumar N. Parthasarathy, Subramanya

Gollahalli,

University of Oklahoma, Norman, OK, United States

2:27pm – Combustion Modelling of a 20 kW Pellet Boiler

Technical Paper Publication. IMECE2018-88063

Joao Silva,

University of Minho, Guimaraes, Portugal,

Lelis

Fraga,

National University of East Timor, Dili, East Timor,

Manuel Eduardo Ferreira,

University of Minho, Guimaraes,

Portugal,

Sergio Chapela, Jacobo Porteiro,

University of

Vigo, Vigo, Spain,

Senhorinha Teixeira, Jose Teixeira,

University of Minho, Guimaraes, Portugal

2:48pm – Improvement in Compost Waste Heat Recovery

System Using LDPE Insulation

Technical Paper Publication. IMECE2018-88597

Nikhil Shrikant Mane,

PVPIT, Budhgaon, Sangli, Maharashtra,

India,

Narayanrao Hargude,

RIT Sakharale, Budhgaon

Maharashtra, India,

Manoj Yadav,

PVPIT, Budhgaon, Sangli,

Maharashtra, India,

Avinash Patil,

SBGI, Miraj, Sangali,

Maharashtra, India,

Mukund L. Harugade,

PVPIT, Budhgaon,

Sangli, Maharashtra, India

3:09pm – Exploration of Solar Hybridization and Thermal

Energy Storage to Enhance Geothermal Power Generation

and Dispatchability

Technical Presentation. IMECE2018-89596

Guangdong Zhu,

NREL, Englewood, CO, United States,

Joshua Dominic McTigue,

NREL, Golden, CO, United States,

Kevin Kitz,

Kitzworks, Boise, ID, United States,

Greg Mungas,

Hyperlight Energy, Riverside, CA, United States,

Daniel Wendt,

INL, Idaho Springs, ID, United States

8-12 FUEL CELL SYSTEMS DESIGN AND

APPLICATIONS

8-12-2 PEM Fuel Cells – II

Third Floor, David L. Lawrence Convention Center, Room 324

1:45pm–3:30pm

Session Chair: Partha Mukherjee,

Purdue University, West

Lafayette, IN, United States

1:45pm – Improving Thermal Performance of a PEMFC With

Wavy Serpentine Flow Channels: A Parametric Study

Technical Paper Publication. IMECE2018-86145

Yuxin Jia, Hongbin Yan,

Northwestern Polytechnical

University, Xi’an, China,

Bengt Sunden,

Lund University, Lund,

Sweden,

Gongnan Xie,

Northwestern Polytechnical University,

Xi’an, China

2:06pm – Numerical Simulation of Droplet Emergence and

Growth From Gas Diffusion Layers (GDLs) in Proton

Exchange Membrane (PEM) Fuel Cell Flow Channels

Technical Paper Publication. IMECE2018-86579

Jingru Benner, Anthony Santamaria, Mehdi Mortazavi,

Western New England University, Springeld, MA, United

States

2:27pm – Modeling Three-Dimensional Complex Flow-

Fields of Proton Exchange Membrane Fuel Cells With Gas

Density Change in Cathode

Technical Paper Publication. IMECE2018-88388

Jinyong Kim, Chao-Yang Wang,

Pennsylvania State

University, University Park, PA, United States

TRACK  ENERGY

–

WEDNESDAY, NOVEMBER 

105

2:48pm – Catalyst-scale Simulation of Transport and

Reaction on 3D STEM-CT Images of Carbon-Supported Pt

Catalyst for Polymer Electrolyte Fuel Cells

Technical Presentation. IMECE2018-89664

Shohei Ogawa,

Carnegie Mellon University, Pittsburgh, PA,

United States,

Elliot Padgett, David A. Muller,

Cornell

University, Ithaca, NY, United States,

Anusorn Kongkanand,

General Motors Company, Fuel Cell Activities, Pontiac, MI,

United States,

Shawn Litster,

Carnegie Mellon University,

Pittsburgh, PA, United States

3:09pm – Optimization of Triple Phase Boundary Length in

YSZ-Carbon-Nanotube Composites

Technical Presentation. IMECE2018-86946

Shiuan-Duo Chiang, Jordan Miller, Leila Ladani,

University

of Texas at Arlington, Arlington, TX, United States

8-7 THERMAL ENERGY STORAGE

8-7-4 Thermal Energy Storage—Systems Integration

Third Floor, David L. Lawrence Convention Center, Room 323

3:45pm–5:30pm

Session Chair: Peiwen Li,

University of Arizona, Tucson, AZ,

United States

3:45pm – Examining Ice Storage and Solar PV as a

Potential Push Toward Sustainability for Qatar

Technical Paper Publication. IMECE2018-86709

Ibraheam Al-Aali, Vijay Modi,

Columbia University, New York,

NY, United States

4:06pm – Analysis of Phase Change Thermal Storage

Conﬁgurations for Minichannel-Based Solar Collectors

Technical Paper Publication. IMECE2018-87837

Sai Kiran Hota, Julio Perez, Gerardo Diaz,

University of

California – Merced, Merced, CA, United States

4:27pm – Using Forecasted Daily Maximum Temperatures

to Control a Chiller Thermal Storage System

Technical Paper Publication. IMECE2018-88307

Christopher Baldwin, Cynthia A. Cruickshank,

Carleton

University, Ottawa, ON, Canada

4:48pm – Novel Thermochemical Heat Storage System for

Medium Temperature Range

Technical Presentation. IMECE2018-89845

Arpit Dwivedi, Manjunath Rajagopal,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States,

Srirupa

Ganguly, B.K. Sharma, Kishore Rajagopalan,

Illinois

Sustainable Technology Center, Champaign, IL, United States,

Sanjiv Sinha,

University of Illinois at Urbana-Champaign,

Urbana, IL, United States

8-9 ENERGY SYSTEMS FOR BUILDINGS

8-9-3 Building Structure/Materials for Load

Reduction

Third Floor, David L. Lawrence Convention Center, Room 319

3:45pm–5:30pm

Session Chair: Hohyun Lee,

Santa Clara University, Santa

Clara, CA, United States

3:45pm – Inﬂuence of Façade Area on Thermal

Performance of Building for Cooling Purposes

Technical Paper Publication. IMECE2018-86033

Hamad Almutairi, Abdulrahman Almutairi, Jaber H.

Almutairi,

Public Authority for Applied Education and Training,

Kuwait, Kuwait

4:06pm – Effect of Inlet Location on Ventilation Flow

Through a Room Fitted With Solar Chimney

Technical Paper Publication. IMECE2018-87051

Kashif Nazir,

University of Technology Sydney, Ultimo, NSW,

Australia,

B. Phuoc Huynh,

University of Technology Sydney,

Broadway NSW, Australia

4:27pm – Wood–Concrete Composite for Thermally

Insulated Building Construction Material

Technical Paper Publication. IMECE2018-87340

Anuj Gupta, Harishchandra Thakur, Gautam Buddha

University, Gautam Budh Nagar, Uttar Pradesh, India

4:48pm – A Numerical Approach for the Evaluation of the

Energy Efﬁciency in Ventilated Façade

Technical Paper Publication. IMECE2018-87525

Massimo Milani, Luca Montorsi, Matt

eo Venturelli,

University of Modena and Reggio Emilia, Reggio Emilia, Italy

5:09pm – Thermal Behavior of Soils Under Tidal Effect:

A Case Study in Guayaquil, Ecuador

Technical Paper Publication. IMECE2018-87738

Daniel Moreira, Ruben Hidalgo-Leon,

Escuela Superior

Politecnica del Litoral, Guayaquil, Ecuador,

Jose Macias,

Instituto Nacional de Eciencia Energética y Energías

Renovables INER, Guayaquil, Ecuador,

Guillermo E. Soriano,

ESPOL Polytechnic University, Guayaquil, Guayas, Ecuador

8-10 RENEWABLE ENERGY

8-10-8 Feasibility and Techno-Economic Analysis of

Renewable Energy Technologies

Third Floor, David L. Lawrence Convention Center, Room 325

3:45pm–5:30pm

Session Chair: Jose C. Pascoa,

Universidade Da Beira Interior,

Covilha 6200, Portugal

3:45pm – Disc Turbine for Energy Harvesting

Technical Paper Publication. IMECE2018-88143

Jose C. Pascoa, Sílvio Cândido, Fernando Charrua-Santos,

Antonio Espirito-Santo, Marco Canario,

Universidade da

Beira Interior, Covilhã, Portugal

TRACK  ENERGY

–

WEDNESDAY, NOVEMBER 

106

4:06pm – How Solar and Storage Can Reduce Coincident

Peak Loads and Payments: A Case Study in Austin, TX

Technical Paper Publication. IMECE2018-86482

Arkasama Bandyopadhyay, Joshua D. Rhodes, Julia P.

Conger, Michael E. Webber,

University of Texas at Austin,

Austin, TX, United States

4:27pm – Annual Performance Investigation of Finned

Double-Pass Solar Air Heater Installed in Sudan

Technical Presentation. IMECE2018-89024

Mohand H. Mohamed,

Pennsylvania State University

Harrisburg, Harrisburg, PA, United States,

Issam Abu-

Mahfouz,

Pennsylvania State University Harrisburg,

Middletown, PA, United States

4:48pm – Deep Decarbonization of Total Global Energy:

Hydrogen and Ammonia C-Free Fuels Versus Electricity as

Integrated CO2-Emission-Free Energy Systems

Technical Pre

sentation. IMECE2018-86187

William Leighty,

The Leighty Foundation, Juneau, AK, United

States

5:09pm – Performance of a Greenhouse Equipped With

Light-Splitting Material and Desalination Unit

Technical Presentation. IMECE2018-89337

Sina Jahangiri Mamouri, James Klausner,

Michigan State

University, East Lansing, MI, United States,

Ronggui Yang,

University of Colorado, Boulder, CO, United States,

Andre

Benard,

Michigan State University, East Lansing, MI, United

States

8-12 FUEL CELL SYSTEMS DESIGN AND

APPLICATIONS

8-12-3 Fuel Cell Systems and Infrastructure

Third Floor, David L. Lawrence Convention Center, Room 324

3:45pm–5:30pm

Session Chair: George Nelson,

University of Alabama in

Huntsville, Huntsville, AL, United States

3:45pm – Dynamic Behavior of a Solid Oxide Steam

Electrolyzer System Using Transient Photovoltaic

Generated Power for Renewable Hydrogen Production

Technical Paper Publication. IMECE2018-86685

Alireza Saeedmanesh,

University of California, Irvine, Irvine,

CA, United States,

Paolo Colombo,

Politecnico di Torino,

Torino, Italy,

Jack Brouwer,

University of California, Irvine,

Irvine, CA, United States

4:06pm – Resolving the Electrochemical Equations of a

Solid Oxide Fuel Cell for Use in Transient Simulation and

Integration Into Cyber-Physical Systems

Technical Paper Publication. IMECE2018-87770

Jesus Arias, Comas Haynes, Aklilu Giorges,

Georgia

Institute of Technology, Atlanta, GA, United States

4:27pm – Electrolyzer Exergy Analysis for an Environmental

Control and Life Support System

Technical Paper Publication. IMECE2018-88119

Raymond Chow,

University of Alabama in Huntsville,

Huntsville, AL, United States,

Jay Perry,

NASA Marshall Space

Flight Center, Huntsville, AL, United States,

George Nelson,

University of Alabama in Huntsville, Huntsville, AL, United

States

4:48pm – Gaseous Fuel Leakage From Natural Gas

Infrastructure

Technical Paper Publication. IMECE2018-88271

Nohora Hormaza Mejia, Jack Brouwer,

National Fuel Cell

Research Center/University of California, Irvine, Irvine, CA,

United States

5:09pm – Assessments From an Expert Elicitation

Workshop on the Cost, Performance, and Market Viability

of Solid Oxide Fuel Cells

Technical Presentation. IMECE2018-89895

Michael Whiston, Inês Azevedo, Shawn Litster, Constantine

Samaras, Kate S. Whitefoot, Jay F. Whitacre,

Carnegie

Mellon University, Pittsburgh, PA, United States

TRACK  ENERGY

–

WEDNESDAY, NOVEMBER 

107

NOTES

108

9-11-1: Computational Modeling of Multiphase Flows

9-11-2: Experimental Characterization of Complex Multiphase Flows

9-11-3: Simulation of Multiphase Flows in Pumps and Complex Systems

9-11-4: Modeling of Slug Flows, Separators and Shocks

9-12-1: Multiphase Flow with Bio-Applications

9-13-1: Industrial Flows – I

9-13-2: Industrial Flows – II

9-13-3: Industrial Flows – III

9-14-1: Symposium on Wind Turbines Aerodynamics and Control

9-15-1: 18th International Symposium on Measurement and Modeling of

Environmental Flows

9-16-1: Fluid Measurements and Instrumentation – I

9-16-2: Fluid Measurements and Instrumentation – II

9-17-1: Fluids Engineering Plenary

9-17-2: Fluids Engineering Plena

ry II

9-18-1: Young Engineers Paper (YEP) Contest

9-2-1: Electric, Magnetic & Thermal Phenomena

9-3-1: Fluid Mechanics and Rheology of Nonlinear Materials and Complex Fluids – I

9-3-2: Fluid Mechanics and Rheology of Nonlinear Materials and Co

mplex Fluids – II

9-3-3: Fluid Mechanics and Rheology of Nonlinear Materials and Complex Fluids – III

9-4-1: Fundamentals and Basic Research

9-4-2: Computational Methods in Fluid Mechanics

9-4-3: Fundamental Fluids Engineering and A

lications

9-5-1: CFD Applications for Flow Optimization and Control – I

9-5-2: CFD Applications for Flow Optimization and Control – II

9-5-3: CFD Applications for Flow Optimization and Control – III

Track Organizers

Mark Duignan,

Savannah River National

Laboratory, United States

Judith Bamberger,

Pacic Northwest

National Laboratory, United States

Topic Organizers

Dennis A. Siginer,

Botswana International

University of Science and Technology &

Universidad de Santiago de Chile

Boris Khusid,

New Jersey Inst of Tech,

United States

Mhamed Boutaous,

Universite de Lyon,

France

Sayavur Bakhtiyarov,

New Mexico Institute

of Mining and Technology, United States

Wayne Strasser,

Eastman Chemical Co,

United States

Stefan aus der Wiesche,

University of

Applied Sciences Muenster, Germany

Khaled J. Hammad,

Central Connecticut

State University, United States

Jun Chen,

Purdue University, United States

Zhongquan Charlie Zheng,

University of

Kansas, United States

Ning Zhang,

McNeese State University,

United States

Philipp Epple,

Coburg University of Applied

Sciences, Germany

Emma Frosina,

University of Naples, Italy

Elia Merzari,

Argonne National Laboratory,

United States

Surya Vanka,

University of Illinois, United

States

S.A. Sherif,

University of Florida, United

States

Yu-Tai Lee,

United States

Javid Bayandor,

State University of New

York, United States

Khaled J. Hammad,

Central Connecticut

State University, United States

Jingsen Ma,

Dynaow, Inc., United States

Mohammad Hossan,

University of Central

Oklahoma, United States

Jacek Wrobel,

poltechresearch.com,

United States

Hongwei Sun,

University of Massachusetts

Lowell, United States

Joseph Katz,

Johns Hopkins University,

United States

Tim O’Hern,

Sandia National Laboratories,

United States

Marianne Francois,

Los Alamos National

Laboratory, United States

Robert Kunz,

Penn State University, United

States

Jingsen Ma,

Dynaow, Inc., United States

Zhongquan Charlie Zheng,

University of

Kansas, United States

Ning Zhang,

McNeese State University,

United States

Alexandrina Untaroiu,

Virginia Tech, United

States

George Chamoun,

Eastman Kodak, United

States

Ivaylo Nedyalkov,

University of New

Hampshire, United States

Nikhil Kumar Palakurthi,

University of

Cincinnati, United States

Lyes Khezzar,

Khalifa University of Science

and Technology, United Arab Emir.

Henry Foust,

University of St. Thomas,

United States

Kevin Anderson,

California State Polytech

University, United States

Majid Rashidi,

Cleveland State University,

United States

Jinkook Lee,

Eaton, United States

Jaikrishnan Kadambi,

Case University,

United States

Upendra Rohatgi,

Brookhaven National

Laboratory, United States

Kashif Nawaz,

Oak Ridge National

Laboratory | ORNL, United States

Stamatios Pothos,

TSI Incorporated, United

States

Martin Wosnik,

University of New

Hamshire, United States

Joel Park,

Naval Surface Warfare Center

Carderock Division, United States

Judith Bamberger,

Pacic Northwest

National Laboratory, United States

B. Terry Beck,

Kansas State Univ, United

States

D. Keith Walters,

University of Oklahoma,

United States

Session Organizers

Dennis A. Siginer,

Botswana International

University of Science and Technology &

Universidad de Santiago de Chile, Chile

Boris Khusid,

New Jersey Inst of Tech,

United States

Mhamed Boutaous,

Universite de Lyon,

France

John Buchanan,

UNNPP, United States

Wayne Strasser,

Eastman Chemical Co,

United States

Taewoo Lee,

Arizona State Univ, United

States

Zhongquan Charlie Zheng,

University of

Kansas, United States

Ning Zhang,

McNeese State University,

United States

Philipp Epple, Coburg University of Applied

Sciences, Germany

Emma Frosina,

University of Naples, Italy

Surya Vanka,

University of Illinois, United

States

Jae Sung Park,

University of Nebraska-

Lincoln, United States

Nazmul Islam,

University of Texas

Rio Grande Valley, United States

Hongwei Sun,

University of Massachusetts

Lowell, United States

Jacek Wrobel,

poltechresearch.com,

United States

Marianne Francois,

Los Alamos National

Laboratory, United States

Robert Kunz,

Penn State University, United

States

Alexandrina Untaroiu,

Virginia Tech, United

States

Kevin Anderson,

California State Polytech

Univ, United States

Ivaylo Nedyalkov,

University of New

Hampshire, United States

Nikhil Kumar Palakurthi,

University of

Cincinnati, United States

Majid Rashidi,

Cleveland State University,

United States

Kashif Nawaz,

Oak Ridge National

Laboratory | ORNL, United States

Stamatios Pothos,

TSI Incorporated, United

States

Ivaylo Nedyalkov,

University of New

Hampshire, United States

TRACK 9 FLUIDS ENGINEERING

TUESDAY, NOVEMBER 13

9-17 FLUIDS ENGINEERING PLENARIES

9-17-1 Fluids Engineering Plenary I

Third Floor, David L. Lawrence Convention Center, Room 301

8:00am–8:45am

8:00am – Interface Actuations for Micro/Nano Fluidics

Plenary Presentation. IMECE2018-90100

Sung Kwon Cho,

University of Pittsburgh, Pittsburgh, PA,

United States

9-17 FLUIDS ENGINEERING PLENARIES

9-17-2 Fluids Engineering Plenary II

Third Floor, David L. Lawrence Convention Center, Room 301

9:00am–9:45am

9:00am – Microﬂuidic Rheometry of Complex Fluids

Plenary Presentation. IMECE2018-90101

Gareth McKinley,

Massachusetts Institute of Technology,

Cambridge, MA, United States

9-3 25

SYMPOSIUM ON FLUID

MECHANICS AND RHEOLOGY OF

NONLINEAR MATERIALS AND COMPLEX

FLUIDS

9-3-1 Fluid Mechanics and Rheology of Nonlinear

Materials and Complex Fluids – I

Third Floor, David L. Lawrence Convention Center, Room 319

10:00am–11:45am

Session Chair: Dennis A. Siginer,

Botswana International

University of Science and Technology & Universidad de

Santiago de Chile, Santiago in Chile & Palapye in Botswana,

Chile

Session Co-Chair: Mhamed Boutaous,

Universite de Lyon,

Villeurbanne, France

10:00am – Brownian Dynamics Simulations of Aggregation

Phenomena in a Magnetic Particle Suspension With an

Alternating Magnetic Field (Relationship Between the

Aggregate Structure and the Heat Production)

Technical Paper Publication. IMECE2018-86544

Seiya Suzuki, Akira Satoh, Muneo

Futamura,

Akita

Prefectural University, Yuri-Honjo, Akita, Japan

10:21am – The Effect of Porous Support Layer in Forward

Osmosis Membranes: A Computational Fluid Dynamics

Simulation

Technical Paper Publication. IMECE2018-86328

Ahmed M. Alshwairekh, Abdullah A. Alghaﬁs, Mustafa Usta,

Anas Alwatban, Robert M. Krysko, Alparslan Oztekin,

Lehigh University, Bethlehem, PA, United States

10:42am – 3D Modeling of the Thermal Phenomena During

Laser Melting of Polymers

Technical Paper Publication. IMECE2018-87549

Mhamed Boutaous,

Universite de Lyon, Villeurbanne, France,

Aoulaiche Mokrane, Shihe Xin,

INSA de Lyon, Villeurbanne,

France,

Dennis A. Siginer,

Botswana International University

of Science and Technology & Universidad de Santiago de

Chile, Santiago in Chile & Palapye in Botswana, Chile

11:03am – Analysis of Melt Flows in an Electric Heating

Furnace for Quartz Glass Synthesis

Technical Paper Publication. IMECE2018-86112

Qianli Ma, Haisheng Fang,

Huazhong University of Science &

Technology, Wuhan, Hubei, China,

Chunli Shang,

Hubei

Feilihua Quartz Glass Co., Ltd., Jingzhou, Hubei, China,

Zhongyi Liu, Jing Wang,

Huazhong University of Science &

Technology, Wuhan, Hubei, China

11:24am – 3D Monte Carlo Simulations on the Preferred

Conﬁguration of Cubic Hematite Particles in the Aggregate

Structures

Technical Presentation. IMECE2018-86635

Kazuya Okada, Akira Satoh, Muneo Futamura,

Akita

Prefectural University, Yuri-honjo, Akita, Japan

9-5 SYMPOSIUM ON CFD APPLICATIONS

FOR OPTIMIZATION AND CONTROLS

9-5-1 CFD Applications for Flow Optimization and

Control – I

Third Floor, David L. Lawrence Convention Center, Room 323

10:00am–11:45am

Session Chair: Zhongquan Charlie Zheng,

University of

Kansas, Lawrence, KS, United States

Session Co-Chairs: Ning Zhang,

McNeese State University,

Lake Charles, LA, United States,

Philipp Epple,

Coburg

University of Applied Sciences, Coburg, Bavaria, Germany

10:00am – Investigation of Three-Dimensional Lagrangian

Coherent Structures in Flow Past Single and Arrays of

Plate: Linear Energy Harvesting Applications

Technical Paper Publication. IMECE2018-86332

Bashar Attiya, I-Han Liu, Cosan Daskiran, Muhannad

Altimemy, Alparslan Oztekin,

Lehigh University, Bethlehem,

PA, United States

10:21am – High Resolution Overset Structured Grid RANS

Simulations of Flow Past a Surface Mounted Cube Using

Eddy Viscosity Closure Models

Technical Paper Publication. IMECE2018-86480

Marc Goldbach,

University of North Carolina at Charlotte,

Tega Cay, SC, United States,

Mesbah Uddin,

North Carolina

Motorsports and Automotive Research Center, Charlotte, NC,

United States

TRACK  FLUIDS ENGINEERING

–

TUESDAY, NOVEMBER 

109

10:42am – Method to Reduce Drag Coefﬁcient for Fuel

Efﬁciency in Semi-Truck Trailer and Trailer Stability

Technical Paper Publication. IMECE2018-86584

Anu Nair, Fred Barez,

San Jose State University, San Jose,

CA, United States,

Metin Ozen,

Ozen Engineering, Inc., San

Jose, CA, United States,

Ernie Thurlow,

San Jose State

University, San Jose, CA, United States

11:03am – Effect of Underbody Geometry on the Fuel

Efﬁciency of Gasoline and Electric Vehicles

Technical Paper Publication. IMECE2018-86629

Krishnaswamy Mahadevan, Fred Barez, Davood

Abdollahian, Ernie Thurlow,

San Jose State University, San

Jose, CA, United States

11:24am – CFD Simulation of Multiphase Flow in

Concentric Annuli

Technical Paper Publication. IMECE2018-86640

Amina Shynybayeva, Luis Rojas-Solorzano,

Nazarbayev

University, Astana, Kazakhstan,

Kristian J. Sveen,

Institute for

Energy Technology, Kjeller, Norway

9-9 MICROFLUIDICS 2018—FLUID

ENGINEERING IN MICRO- AND

NANOSYSTEMS

9-9-1 Mathematical Modeling in Microuidics

Third Floor, David L. Lawrence Convention Center, Room 324

10:00am–11:45am

Session Chair: Jae Sung Park,

University of Nebraska–

Lincoln, Lincoln, NE, United States

Session Co-Chair: Nazmul Islam,

University of Texas

Rio Grande Valley, Edinburg, TX, United States

10:00am – Modelling on Predicting Pressure Distribution

and Capacity of Foil Thrust Bearing

Technical Paper Publication. IMECE2018-86085

Zheng Xu, Fenzhu JI, Yu Zhou, Shuiting Ding, Fanyong Wu,

Beihang University, Beijing, China

10:21am – Combined Magnetohydrodynamic/Pressure

Driven Flow of Multi-Layer Pseudoplastic Fluids Through a

Parallel Flat Plates Microchannel

Technical Paper Publication. IMECE2018-86676

Juan R. Gomez, Juan P. Escandon,

Instituto Politecnico

Nacional, SEPI-ESIME Unidad Azcapotzalco, Cuidad de

México, Mexico

10:42am – Theoretical and Numerical Analysis of Mixing of

Conﬁned Nanodroplets

Technical Presentation. IMECE2018-87826

Alireza Karbalaei, Hyoung Jin Cho,

University of Central

Florida, Orlando, FL, United States

11:03am – A Passive Stokes Flow Rectiﬁer for Newtonian

Fluids

Technical Presentation. IMECE2018-89658

Aryan Mehboudi, Junghoon Yeom,

Michigan State University,

East Lansing, MI, United States

11:24am – Spray Performance of Alternative Jet Fuel Based

Nanofuels at High-Ambient Conditions

Technical Paper Publication. IMECE2018-87387

Mohamed Soltan, Buthaina Al Abdulla, Al Reem Al-Dosari,

Kumaran Kannaiyan,

Texas A&M University at Qatar, Doha,

Qatar,

Reza Sadr,

Texas A&M University, College Station, TX,

United States

9-18 YOUNG ENGINEERS PAPER (YEP)

CONTEST

9-18-1 Young Engineers Paper (YEP) Contest

Third Floor, David L. Lawrence Convention Center, Room 325

10:00am–11:45am

Session Chair: B. Terry Beck,

Kansas State University,

Manhattan, KS, United States

Session Co-Chair: D. Keith Walters,

University of Oklahoma,

Norman, OK, United States

10:00am – Downwind Two-Bladed Wind Turbine

Aerodynamic Performance Evaluation Implementing

Actuator Line Model

Technical Paper Publication. IMECE2018-86549

Sebastian Henao,

National University of Colombia, Marinilla,

Antioquia, Colombia,

Aldo G. Benavides,

National University

of Colombia, Medellín, Antioquia, Colombia,

Omar D. López,

Los Andes University, Bogota, Cundinamarca, Colombia

10:21am – The Effect of a Spanwise Body Force on Skin-

Friction Reduction and Its Connections to Low-Drag States

in Turbulent Flow

Technical Paper Publication. IMECE2018-86610

Jae Sung Park, Thomas Hafner,

University of Nebraska–

Lincoln, Lincoln, NE, United States

10:42am – Pulsatory Mixing of Laminar Flow Using Bubble-

Driven Micro-Pumps

Technical Paper Publication. IMECE2018-86937

Brandon Hayes, Austin Hayes, Matthew Rolleston,

James Krisher, Alexander Ferreira,

Rochester Institute of

Technology, Rochester, NY, United States

11:03am – The Impact of Adding a Labyrinth Surface to an

Optimal Helical Seal Design

Technical Paper Publication. IMECE2018-87089

Wisher Paudel, Cori Watson, Houston G. Wood,

University of

Virginia, Charlottesville, VA, United States

11:24am – Comparing Fish-Inspired Ram Filters for

Collection of Harmful Algae

Technical Paper Publication. IMECE2018-88797

Lauren Marshall, Adam Schroeder, Brian Trease,

University

of Toledo, Toledo, OH, United States

TRACK  FLUIDS ENGINEERING

–

TUESDAY, NOVEMBER 

110

9-3 25

SYMPOSIUM ON FLUID

MECHANICS AND RHEOLOGY OF

NONLINEAR MATERIALS AND COMPLEX

FLUIDS

9-3-2 Fluid Mechanics and Rheology of Nonlinear

Materials and Complex Fluids – II

Third Floor, David L. Lawrence Convention Center, Room 319

1:45pm–3:30pm

Session Chair: Mhamed Boutaous,

Universite de Lyon,

Villeurbanne, France

Session Co-Chair: Dennis A. Siginer,

Botswana International

University of Science and Technology & Universidad de

Santiago de Chile, Santiago in Chile & Palapye in Botswana,

Chile

1:45pm – Numerical Modeling of Phan-Thien-Tanner

Viscoelastic Fluid Flow Through a Square Cross-Section

Duct: Heat Transfer Enhancement due to Shear-Thinning

Effects

Technical Paper Publication. IMECE2018-87568

Mhamed Boutaous,

Universite de Lyon, Villeurbanne, France,

Fouad Hagani, Shihe Xin, Ronnie Knikker,

INSA de Lyon,

Villeurbanne, France,

Dennis A. Siginer,

Botswana

International University of Science and Technology &

Universidad de Santiago de Chile, Santiago in Chile & Palapye

in Botswana, Chile

2:06pm – Resonance in Laminar Pipe Flow of Non-Linear

Viscoelastic Fluids

Technical Paper Publication. IMECE2018-87973

Mario Letelier,

University of Santiago of Chile, Santiago,

Chile,

Dennis A. Siginer,

Botswana International University

of Science and Technology & Universidad de Santiago de

Chile, Santiago in Chile & Palapye in Botswana, Chile,

Diego Almendra, Juan Stockle,

Universidad de Santiago

de Chile, Santiago, Chile

2:27pm – Rheology of Non-Dilute Suspensions of

Deformable Particles in Newtonian Solvents Under Large

Amplitude Oscillatory Shear (LAOS)

Technical Presentation. IMECE2018-89194

Christoph Kammer, Pedro Ponte Castañeda,

University of

Pennsylvania, Philadelphia, PA, United States

2:48pm – Rheological Characteristics of Surfactant-Based

Fluids: A Comprehensive Study

Technical Paper Publication. IMECE2018-86044

Ahmed Kamel,

University of Texas of the Permian Basin,

Odessa, TX, United States

3:09pm – Study on the Numerical Analysis of In-Line Type

Subsea Separator for Liquid-Liquid Mixture Flow

Technical Paper Publication. IMECE2018-87301

Young Ju Kim, Namsub Woo, Hyunji Kim, Sangmok Han,

Jiho Ha,

Korea Institute of Geoscience and Mineral Resources,

Pohang, Gyeongsangbuk-do, Korea (Republic),

Sunchul Huh,

Gyeongsang National University, Tongyeong-si,

Gyeongsangnam-do, Korea (Republic)

9-5 SYMPOSIUM ON CFD APPLICATIONS

FOR OPTIMIZATION AND CONTROLS

9-5-2 CFD Applications for Flow Optimization and

Control – II

Third Floor, David L. Lawrence Convention Center, Room 323

1:45pm–3:30pm

Session Chair: Zhongquan Charlie Zheng,

University of

Kansas, Lawrence, KS, United States

Session Co-Chairs: Ning Zhang,

McNeese State University,

Lake Charles, LA, United States,

Philipp Epple,

Coburg

University of Applied Sciences, Coburg, Bavaria, Germany

1:45pm – Optimization of Curved Spacer Prototype Design

for Flow Improvement in Centrifugal Pump Impeller

Technical Paper Publication. IMECE2018-87075

Munther Hermez,

Lawrence Technological University,

Southeld, MI, United States,

Badih Jawad,

Lawrence

Technological University, Dearborn Heights, MI, United States,

Liping Liu, Sabah Abro,

Lawrence Technological University,

Southeld, MI, United States

2:06pm – Inﬂuence of Blade Shape Geometry on Very Low

Speciﬁc Speed Centrifugal Pump Performance

Technical Paper Publication. IMECE2018-87119

Muhamed Elsayed Albadawi, Ihab Adam, Sherif Haddara,

Ahmed Elsherif,

Alexandria University, Alexandria, Egypt

2:27pm – Efﬁciency Variation on a 4-Stage Low Speed

Research Compressor With a Redesigned Cantilevered

Stator

Technical Paper Publ

ication. IMECE2018-87166

Zhenzhou Ju, Jinfang Teng,

Shanghai Jiao Tong University,

Shanghai, China,

Lin Fan, Yongjian Zhong,

AECC Commercial

Aircraft Engine Company, Shanghai, China,

Xiao-Qing Qiang,

Shanghai Jiao Tong University, Shanghai, China

2:48pm – Surrogate Model Based Optimization for Chevron

Foil Thrust Bearing

Technical Presentation. IMECE2018-87778

Gen Fu, Alexandrina Untaroiu,

Virginia Tech, Blacksburg, VA,

United States

3:09pm – Comparison of Experimental,

Thermoelastohydrodynamic (TEHD) and Thermal, Non-

Deforming Computational Fluid Dynamics (CFD) Results for

Thrust Bearings: Part II

Technical Paper P

ublication. IMECE2018-87798

Xin Deng, Cori Watson, Minhui He, Houston G. Wood,

Roger Fittro,

University of Virginia, Charlottesville, VA, United

States

TRACK  FLUIDS ENGINEERING

–

TUESDAY, NOVEMBER 

111

9-9 MICROFLUIDICS 2018—FLUID

ENGINEERING IN MICRO- AND

NANOSYSTEMS

9-9-2 Droplet Microuidics

Third Floor, David L. Lawrence Convention Center, Room 324

1:45pm–3:30pm

Session Chair: Hongwei Sun,

University of Massachusetts

Lowell, Lowell, MA, United States

1:45pm – Experimental Investigation on Newtonian Drop

Formation in Different Continuous Phase Fluids

Technical Paper Publication. IMECE2018-86602

Ashkan Nazari,

Virginia Tech, Blacksburg, VA, United States,

Arash Nazari,

K.N. Toosi University of Technology, Tehran, Iran

2:06pm – Droplet Mixing Based on Thermotaxis

Technical Presentation. IMECE2018-87730

Alireza Karbalaei, Ranganathan Kumar, Hyoung Jin Cho,

University of Central Florida, Orlando, FL, United States

2:27pm – Forced Wetting of Liquids Using Ultrasonic

Surface Vibration

Technical Paper Publication. IMECE2018-87832

Matthew Trapuzzano, Nathan Crane, Rasim Guldiken,

Andres Tejada-Martinez,

University of South Florida, Tampa,

FL, United States

2:48pm – Preliminary Investigation of the Effect of

Dielectrophoresis on Colloidal Transport and Deposition in

Evaporating Droplets

Technical Paper Publication. IMECE2018-88054

Xi Li, Kara L. Maki, Michael Schertzer,

Rochester Institute of

Technology, Rochester, NY, United States

3:09pm – Study of Gas-Liquid Droplet Microﬂuidics in

Conﬁned Flow Focusing Geometries for Enhanced Droplet

Generation

Technical Presentation. IMECE2018-89904

Pooyan Tirandazi, Julian D. Arroyo, Dac Duc Ho, Carlos H.

Hidrovo,

Northeastern University, Boston, MA, United States

9-11 14

FORUM ON RECENT

DEVELOPMENTS IN MULTIPHASE FLOW

9-11-1 Computational Modeling of Multiphase Flows

Third Floor, David L. Lawrence Convention Center, Room 325

1:45pm–3:30pm

Session Chair: Joseph Katz,

Johns Hopkins University,

Baltimore, MD, United States

Session Co-Chair: Marianne Francois,

Los Alamos National

Laboratory, Los Alamos, NM, United States

1:45pm – An Accurate Unstructured Finite Volume Discrete

Boltzmann Method

Technical Paper Publication. IMECE2018-87136

Leitao Chen, Laura Schaefer,

Rice University, Houston, TX,

United States,

Xiaofeng Cai,

University of Delaware, Newark,

DE, United States

2:06pm – A Hyperbolicity Analysis of the 1991 OLGA’s

Model for Isothermal Flow

Technical Paper Publication. IMECE2018-87513

Carina N. Sondermann, Raphael V. Freitas, Rodrigo

Patricio, Aline B. Figueiredo, Gustavo C.R. Bodstein,

Federal University of Rio de Janeiro, Rio de Janeiro, Brazil,

Felipe B. De F. Rachid,

Fluminense Federal University

(PGMEC/UFF), Rio de Janeiro, Brazil,

Renan Martins

Baptista,

Petrobras, Rio de Janeiro, Brazil

2:27pm – Numerical Study of Two-Phase Flow in a

Horizontal Pipeline Using an Unconditionally Hyperbolic

Two-Fluid Model

Technical Paper Publication. IMECE2018-87571

Raphael V. Freitas, Carina N. Sondermann, Rodrigo

Patricio, Aline B. Figueiredo, Gustavo C.R. Bodstein,

Federal University of Rio de Janeiro, Rio de Janeiro, Brazil,

Felipe B. De F. Rachid,

Fluminense Federal University

(PGMEC/UFF), Rio de Janeiro, Brazil,

Renan Martins

Baptista,

Petrobras, Rio de Janeiro, Brazil

2:48pm – Interfacial Mobility Calculations From Random

Atomistic Walks

Technical Presentation. IMECE2018-87957

Paul Barclay, Jennifer Lukes,

University of Pennsylvania,

Philadelphia, PA, United States

3:09pm – Investigation of Power-Law Shear Thinning Fluid

Wicking in Capillary Channels by Two-Phase Direct

Numerical Simulation With Volume-of-Fluid (VOF) Method

Technical Presentation. IMECE2018-89580

An Fu, Nikhil Kumar Palakurthi,

University of Cincinnati,

Cincinnati, OH, United States,

James Comer,

The Procter &

Gamble Company, Cincinnati, OH, United States,

Milind Jog,

University of Cincinnati, Cincinnati, OH, United States

9-3 25

SYMPOSIUM ON FLUID

MECHANICS AND RHEOLOGY OF

NONLINEAR MATERIALS AND COMPLEX

FLUIDS

9-3-3 Fluid Mechanics and Rheology of Nonlinear

Materials and Complex Fluids – III

Third Floor, David L. Lawrence Convention Center, Room 319

3:45pm–5:30pm

Session Chair: Mhamed Boutaous,

Universite de Lyon,

Villeurbanne, France

Session Co-Chair: Dennis A. Siginer,

Botswana International

University of Science and Technology & Universidad de

Santiago de Chile, Santiago in Chile & Palapye in Botswana,

Chile

3:45pm – The Flow Structure of Annular Yield-

Pseudoplastic Non-Newtonian Jets

Technical Presentation. IMECE2018-89383

Khaled J. Hammad,

Central Connecticut State University

Simsbury, CT, United States

TRACK  FLUIDS ENGINEERING

–

TUESDAY, NOVEMBER 

112

4:06pm – The Effect of the Fluid Film Variable Viscosity on

the Hydrostatic Thrust Spherical Bearing Performance in

the Presence of Centripetal Inertia and Surface Roughness:

Part 2—Recessed Fitted Bearing

Technical Paper Publication. IMECE2018-86029

Ahmad W.Y. Elescandarany,

Alex University, Alexandria,

Egypt

4:27pm – Herschel-Bulkley Fluid Flow Characteristics in a

Duct With an Obstacle

Technical Paper Publication. IMECE2018-87092

Nariman Ashraﬁ,

IAU, Tehran, Iran,

Ali Sadeghi, Armin

Chegini,

SRBIAU, Tehran, Iran,

Mehdi Shafahi,

IAU, Tehran,

Iran

4:48pm – Mixing Enhancement in a Novel Type of “Split and

Recombine” Static Mixer

Technical Paper Publication. IMECE2018-88030

Charbel Habchi,

Notre Dame University - Louaize, Zouk

Mosbeh, Lebanon,

Thierry Lemenand,

University of Angers,

Angers, France,

Fouad Azizi,

American University of Beirut,

Beirut, Lebanon

5:09pm – Viscoplastic Fluid Flow Between Parallel Plates

With Triangular Obstacles

Technical Paper Publication. IMECE2018-87105

Nariman Ashraﬁ,

IAU, Tehran, Iran,

Ali Sadeghi, Armin

Chegini,

SRBIAU, Tehran, Iran

9-5 SYMPOSIUM ON CFD APPLICATIONS

FOR OPTIMIZATION AND CONTROLS

9-5-3 CFD Applications for Flow Optimization and

Control – III

Third Floor, David L. Lawrence Convention Center, Room 323

3:45pm–5:30pm

Session Chair: Zhongquan Charlie Zheng,

University of

Kansas, Lawrence, KS, United States

Session Co-Chairs: Ning Zhang,

McNeese State University,

Lake Charles, LA, United States,

Philipp Epple,

Coburg

University of Applied Sciences, Coburg, Bavaria, Germany

3:45pm – LES and Hybrid RANS-LES Simulation of a

Pulsating Channel Flow

Technical Paper Publication. IMECE2018-87990

Tausif Jamal,

University of Oklahoma, Norman, OK, United

States,

Huiyu Wang,

University of Oklahoma, Norman, OK,

United States,

D. Keith Walters,

University of Oklahoma,

Norman, OK, United States

4:06pm – Transient Analysis of Air Flow in a Channel for

Unconventional Radiator

Technical Paper Publication. IMECE2018-88327

Wahidul Islam, Jobaidur Khan,

University at Buffalo, State

University of New York, Buffalo, NY, United States

4:27pm – On Fine Tuning the SST K - ω Turbulence Model

Closure Coefﬁcients for Improved Prediction of Automotive

External Flows

Technical Paper Publication. IMECE2018-88328

Chunhui Zhang,

University of North Carolina at Charlotte,

Charlotte, NC, United States,

Mesbah Uddin,

North Carolina

Motorsports and Automotive Research Center, Charlotte, NC,

United States,

Christian Selent,

University of North Carolina at

Charlotte, Charlotte, NC, United States

4:48pm – Experimental Analysis of Air Flow in a Channel for

Unconventional Radiator

Technical Paper Publication. IMECE2018-88332

Saad Salman, Rishabh Sharma, Kanishk Suri, Zeshan

Khetani, Muhammad Taha Junaidy, Jonatan Meza,

Jobaidur Khan,

University at Buffalo, State University of New

York, Buffalo, NY, United States

5:09pm – Effects of Double Noise Barriers on Highway

Pollutant Dispersion Under Various Atmospheric Boundary

Conditions

Technical Presentation. IMECE2018-88444

Liyuan Gong, Xiuling Wang,

Purdue University Northwest,

Hammond, IN, United States

9-9 MICROFLUIDICS 2018—FLUID

ENGINEERING IN MICRO- AND

NANOSY

STEMS

9-9-3 Fundamentals and Applications of

Microuidics

Third Floor, David L. Lawrence Convention Center, Room 324

3:45pm–5:30pm

Session Chair: Nazmul Islam,

University of Texas Rio Grande

Valley, Edinburg, TX, United States

Session Co-Chair: Jacek Wrobel,

Poltechresearch.com, Great

Falls, VA, United States

3:45pm – Transition From Planar Stratiﬁed Flow in

Converging Microchannels

Technical Paper Publication. IMECE2018-86289

Zachary Lamberty, Minseo Park, Nelson Macken,

Swarthmore College, Swarthmore, PA, United States,

Adam Melvin,

Louisiana State University, Baton Rouge, LA,

United States

4:06pm – Experimental Study of the Suspension Flow Past

Conﬁned Low-Aspect-Ratio Cylinder Arranged

Microchannels

Technical Paper Publication. IMECE2018-86980

Xiao Cheng, Zhenhai Pan, Huiying Wu,

Shanghai Jiao Tong

University, Shanghai, China

4:27pm – Degradation of Hydrophobic Surface Coatings

Under Water Exposure

Technical Paper Publication. IMECE2018-87860

Matthew Trapuzzano, Rasim Guldiken, Andres Tejada-

Martinez, Nathan Crane,

University of South Florida, T

FL, United States

TRACK  FLUIDS ENGINEERING

–

TUESDAY, NOVEMBER 

113

4:48pm – A Quick and Easy Fabrication Method for

Microﬂuidics Using Solid Ink Printing

Technical Presentation. IMECE2018-89139

Sara Hopper,

Endicott College, Beverly, MA, United States,

Haipeng Zhang, Sangjin Ryu,

University of Nebraska–Lincoln,

Lincoln, NE, United States

5:09pm – Micropattern-Controlled Wicking Enhancement in

Hierarchical Micro-/Nanostructures

Technical Presentation. IMECE2018-89192

Arif Rokoni, Dong-Ook Kim, Ying Sun,

Drexel University,

Philadelphia, PA, United States

9-11 14

FORUM ON RECENT

DEVELOPMENTS IN MULTIPHASE FLOW

9-11-2 Experimental Characterization of Complex

Multiphase Flows

Third Floor, David L. Lawrence Convention Center, Room 325

3:45pm–5:30pm

Session Chair: Marianne Francois,

Los Alamos National

Laboratory, Los Alamos, NM, United States

Session Co-Chair: Mark R Duignan,

Savannah River National

Laboratory, Aiken, SC, United States

3:45pm – Parametric Study and Improvement of Phase

Separation in Intermediate Headers of Microchannel

Condensers

Technical Paper Publication. IMECE2018-88438

Jun Li, Pega Hrnjak,

University of Illinois at Urbana-

Champaign, Urbana, IL, United States

4:06pm – Experimental Study of Chamber Volume Effect on

Bubble Formation From Oriﬁce Plates Submerged in Water

Technical Paper Publication. IMECE2018-87652

Omkar Gokhale, Milind Jog, Raj M. Manglik,

University of

Cincinnati, Cincinnati, OH, United States

4:27pm – Using Experimental Fluid Dynamics and

Computational Fluid Dynamics for Evaluating Periodic

Mixing

Technical Paper Publication. IMECE2018-88531

Judith Bamberger, Leonard Pease, Kurtis Recknagle,

Carl Enderlin, Michael Minette,

Pacic Northwest National

Laboratory, Richland, WA, United States

4:48pm – Experimental Analysis of Two Phase Flow in a

Quasi-Homogeneous Porous Inclined Hele-Shaw Cell

Technical Presentation. IMECE2018-88633

Luis Luviano-Ortiz,

University of Guanajuato,

Salamanca/Guanajuato, Guanajuato, Mexico,

Gustavo

Guerrero-Arellano,

University of Guanajuato, Santa Cruz de

Juventino Rosas, Guanajuato, Mexico,

Nubia Sanchez,

University of Guanajuato, Salamanca, Guanajuato, Mexico,

Eduardo Ramos,

Universidad Nacional Autónoma de México,

Temixco, Morelos, Mexico,

Abel Hernandez-Guerrero,

University of Guanajuato, Salamanca, Guanajuato, Guanajuato,

Mexico

5:09pm – Understanding Transport of Microgels Through a

Constrictive Channel

Technical Presentation. IMECE2018-89990

Shuaijun Li, Florian Crepin, Alimohammad Anbari, Jing Fan,

City College of New York, New York, NY, United States

TRACK  FLUIDS ENGINEERING

–

TUESDAY, NOVEMBER 

114

WEDNESDAY, NOVEMBER 14

9-5 SYMPOSIUM ON CFD APPLICATIONS

FOR OPTIMIZATION AND CONTROLS

9-5-4 CFD Applications for Flow Optimization and

Control – IV

Third Floor, David L. Lawrence Convention Center, Room 326

10:00am–11:45am

Session Chair: Zhongquan Charlie Zheng,

University of

Kansas, Lawrence, KS, United States

Session Co-Chairs: Ning Zhang,

McNeese State University,

Lake Charles, LA, United States,

Philipp Epple,

Coburg

University of Applied Sciences, Coburg, Bavaria, Germany

10:00am – Numerical Analysis of Breakwaters Turbulence

Under Coastal Wave Actions

Technical Paper Publication. IMECE2018-88613

Huanrong Ouyang, Joshua Hantz, Tam Nguyen,

McNeese State University, Lake Charles, LA, United States,

Amy Harrington,

McNeese State University, Winnie, TX,

United States,

Ning Zhang,

McNeese State University, Lake

Charles, LA, United States

10:21am – New Design Method for Spiral Casings

Considering the Properties of the Impeller and Spiral

Casing at Design and Off-Design Conditions and Numerical

Veriﬁcation With CFD

Technical Paper Publication. IMECE2018-88673

Philipp Epple, Manuel Fritsche, Michael Steppert, Michael

Steber,

Coburg University of Applied Sciences, Coburg,

Bavaria, Germany

10:42am – The Impact of the Gas Temperature and of the

Relative Humidity on the Performance of Fans Operating in

Drying Plants

Technical Paper Publication. IMECE2018-88674

Manuel Fritsche, Philipp Epple,

Coburg University of Applied

Sciences, Coburg, Bavaria, Germany,

Antonio Delgado,

Friedrich-Alexander University of Erlangen-Nuernberg,

Erlangen, Germany

11:03am – Numerical Investigation to the Inﬂuence of

Upstream Components on the Pressure Fluctuation in Draft

Tube of Francis Turbine

Technical Presentation. IMECE2018-88818

Wen-Tao Su,

Harbin Institute of Technology, Harbin,

Heilongjiang, China,

You-Ning Xu,

Shenyang Institute of

Engineering, Shenyang, Liaoning, China

9-11 14

FORUM ON RECENT

DEVELOPMENTS IN MULTIPHASE FLOW

9-11-3 Simulation of Multiphase Flows in Pumps and

Complex Systems

Third Floor, David L. Lawrence Convention Center, Room 327

10:00am–11:45am

Session Chair: Robert Kunz,

Pennsylvania State University,

University Park, PA, United States

Session Co-Chair: Joseph Katz,

Johns Hopkins University,

Baltimore, MD, United States

10:00am – Large Eddy Simulation of Ventilated Pump-

Turbine for Wastewater Treatment

Technical Paper Publication. IMECE2018-86330

Cosan Daskiran, Bashar Attiya, Muhannad Altimemy, I-Han

Liu, Alparslan Oztekin,

Lehigh University, Bethlehem, PA,

United States

10:21am – A Reduced-Order Model for Predicting the

Performance of a Liquid-Ring Vacuum Pump

Technical Paper Publication. IMECE2018-86710

Irsha Pardeshi, Ashutosh Pandey, Tom Shih,

Purdue

University, West Lafayette, IN, United States

10:42am – Effect of Particle Parameters on Erosion Wear

and Performance of Screw Centrifugal Pump

Technical Paper Publication. IMECE2018-88586

Zhengjing Shen, Wuli Chu,

Northwestern Polytechnical

University, Xi’an, China

11:03am – Numerical and Experimental Investigation of the

Manufacturing Process of Ball Bearings Focusing on

Enhancing the Aesthetics of the Outer Surface

Technical Presentation. IMECE2018-89614

Abdullah Alsairaﬁ, Stefan Moldovan,

Youngstown State

University, Youngstown, OH, United States

9-13 27

SYMPOSIUM ON INDUSTRIAL

FLOWS

9-13-1 Industrial Flows – I

Third Floor, David L. Lawrence Convention Center, Room 321

10:00am–11:45am

Session Chair: Alexandrina Untaroiu,

Virginia Tech,

Blacksburg, VA, United States

Session Co-Chairs: George Chamoun,

Eastman Kodak, Gray,

TN, United States,

Kevin Anderson,

California State Polytech

University, Pomona, CA, United States

10:00am – Full Scale Testing of Pulse Jet Mixer Operating

Control

Technical Paper Publication. IMECE2018-87866

Leolein Moualeu, Aaron Wand, Klemme Herman, Michaela

Trenidad, Bethany Springer, Michael Hall,

Bechtel National

Inc., Richland, WA, United States,

Nathan McAdams,

Bechtel

National Inc., Reston, VA, United States,

Langdon Holton,

U.S. Department of Ener

TRACK  FLUIDS ENGINEERING

–

WEDNESDAY, NOVEMBER 

115

10:42am – Numerical Investigations of a Rotating Wire-

Wrapped Cylinder

Technical Paper Publication. IMECE2018-86672

Assma Begum, Komal Gada, Hamid Rahai,

California State

University-Long Beach, Long Beach, CA, United States

11:03am – The Effect of PTFE Membrane Properties on

Vacuum Membrane Distillation Module Performance

Technical Paper Publication. IMECE2018-86327

Mustafa Usta, Robert M. Krysko, Ali E. Anqi, Ahmed M.

Alshwairekh, Alparslan Oztekin,

Lehigh University,

Bethlehem, PA, United States

11:24am – Assessment of Different Turbulence Models on

Simulations of Conﬁned Jets in a Crossﬂow at Supercritical

Pressure

Technical Paper Publication. IMECE2018-87894

Saeid Janani, Komal Gada, Hamid Rahai,

California State

University-Long Beach, Long Beach, CA, United States,

Farhad Davoudzadeh,

Air Force Research Laboratory,

Lancaster, CA, United States

9-8 KIRTI (KARMAN) GHIA CELEBRATION

OF LIFE SYMPOSIUM

9-8-1 Kirti Ghia Celebration of Life – I

Third Floor, David L. Lawrence Convention Center, Room 326

1:45pm–3:30pm

Session Chair: Surya Vanka,

University of Illinois, Champaign,

IL, United States

Session Co-Chair: S.A. Sherif,

University of Florida,

Gainesville, FL, United States

1:45pm – Flow in Driven Cavities: Building on Karman

Ghia’s Legacy

Technical Presentation. IMECE2018-89029

Surya Vanka,

University of Illinois, Champaign, IL, United

States

2:06pm – In Memory of Prof. Kirti Ghia: A Tribute to Life-

Long Learning and Evolution

Technical Presentation. IMECE2018-90010

Ameer G.,

Department of Homeland Security, Arlington, VA,

United States

2:27pm – LOW-Emission Combustion Research at NASA

Glenn

Technical Presentation. IMECE2018-89025

Dhanireddy Reddy,

NASA Glenn Research Center, Cleveland,

OH, United States

2:48pm – GlennICE: A Next Generation Computational Ice

Accretion Solver

Technical Presentation. IMECE2018-89142

Christopher Porter,

NASA Glenn Research Center, Cleveland,

OH, United States

9-11 14

FORUM ON RECENT

DEVELOPMENTS IN MULTIPHASE FLOW

9-11-4 Modeling of Slug Flows, Separators, and

Shocks

Third Floor, David L. Lawrence Convention Center, Room 327

1:45pm–3:30pm

Session Chair: Mark R. Duignan,

Savannah River National

Laboratory, Aiken, SC, United States

Session Co-Chair: Robert Kunz,

Pennsylvania State

University, University Park, PA, United States

1:45pm – The Investigation of the Kinetic Energy of Slug in

a Horizontal Channel Using VOF Method

Technical Paper Publication. IMECE2018-87108

Nariman Ashraﬁ,

IAU, Tehran, Iran,

Mohammad Reza Ansari,

Tarbiat Modares University, Tehran, Iran,

Armin Chegini, Ali

Sadeghi,

SRBIAU, Tehran, Iran

2:06pm – Analysis of Two-Phase Flow Slug Regime With

Engineering Approach

Technical Paper Publication. IMECE2018-87118

Nariman Ashraﬁ,

IAU, Tehran, Iran,

Armin Chegini, Ali

Sadeghi,

SRBIAU, Tehran, Iran

2:27pm – Mechanistic Modeling of Dynamic Zero-Net

Liquid Holdup (ZNLH) in Gas-Liquid Cylindrical Cyclone

(GLCC©) Separator

Technical Paper Publication. IMECE2018-88481

Srinivas Swaroop Kolla, Megharaj Praneeth Karpurapu,

Ram Mohan, Ovadia Shoham,

University of Tulsa, Tulsa, OK,

United States

2:48pm – On the Aspects of a Convergent Shock Wave

Impinging a Perturbed Density Interface

Technical Paper Publication. IMECE2018-88098

Erik Proano, Bertrand Rollin, Dongeun Seo,

Embry-Riddle

Aeronautical University, Daytona Beach, FL, United States

9-13 27

SYMPOSIUM ON INDUSTRIAL

FLOWS

9-13-2 Industrial Flows – II

Third Floor, David L. Lawrence Convention Center, Room 321

1:45pm–3:30pm

Session Chair: Kevin Anderson,

California State Polytech

University, Pomona, CA, United States

Session Co-Chairs: Alexandrina Untaroiu,

Virginia Tech,

Blacksburg, VA, United States,

Ivaylo Nedyalkov,

University

of New Hampshire, Durham, NH, United States

1:45pm – Pressure Fluctuation Mitigation in a Francis

Turbine With Water Injection: Computational Study

Technical Paper Publication. IMECE2018-86333

Muhannad Altimemy, Cosan Daskiran, Bashar A

ttiya,

I-Han Liu, Alparslan Oztekin,

Lehigh University

PA, United States

TRACK  FLUIDS ENGINEERING

–

WEDNESDAY, NOVEMBER 

116

2:06pm – Development of the Pneumatic Non-Contact

Holder

Technical Paper Publication. IMECE2018-86618

Tetsuhiro Tsukiji,

Sophia University, Tokyo, Japan,

Ryosuke

Kondo,

Sophia University, Tokorozawa-shi, Saitama, Japan

2:27pm – Experimental Characterization of Particle-Laden

Air Flow Across Horizontal Pipe Junctions

Technical Paper Publication. IMECE2018-87833

Tariq Khan, Mohamed Alshehhi,

The Petroleum Institute, Abu

Dhabi, Abu Dhabi, United Arab Emir.,

Xu Rumin,

Khalifa

University of Science and Technology, Abu Dhabi, Abu Dhabi,

United Arab Emir.,

Saqib Salam,

The Petroleum Institute, Abu

Dhabi, Abu Dhabi, United Arab Emir

2:48pm – Numerical Analysis on the Hydraulic Performance

of the Auxiliary Impeller in Large Capacity Canned-Motor

Pump

Technical Paper Publication. IMECE2018-87285

Shengde Wang, Zhenqiang Yao, Hong Shen, Guohu Luo,

Shanghai Jiao Tong University, Shanghai, China

3:09pm – An Assessment of Health Hazards in Valves for

Gaseous Oxygen Service: Sources and Preventive

Measures

Technical Paper Publication. IMECE2018-86018

Anil Kumar,

Independent Author, Pune, India,

Younus Sheikh,

Army Institute of Technology, Savitribai Phule Pune University,

Pune, India

9-6 PANEL: CFD/EFD CHOICE? —

A DILEMMA FOR INDUSTRIES

9-6-1 Computational or Experimental Fluid

Dynamics?—A Dilemma for Industries

Third Floor, David L. Lawrence Convention Center, Room 327

3:45pm–5:30pm

Session Chair: Philipp Epple,

Coburg University of Applied

Sciences, Coburg, Bavaria, Germany

Session Co-Chair: Emma Frosina,

University of Naples,

Naples, Italy

3:45pm – CFD and EFD in the Design Process of Fans and

Blowers

Panel Presentation. IMECE2018-88829

Philipp Epple,

Coburg University of Applied Sciences, Coburg,

Bavaria, Germany

4:06pm – How Do You Know It’s Accurate? An Insider’s

Guide to CFD Validation and Veriﬁcation

Panel Presentation. IMECE2018-88844

William Kulp,

ANSYS, Canonsburg, PA, United States

4:27pm – Prediction of Both Aeration and Cavitation in

Axial Piston Pumps Using a 3D-CFD Numerical Approach

Panel Presentation. IMECE2018-88969

Emma Frosina,

University of Naples, Naples, Italy

4:48pm – Evaluating Periodic Mixing With Experimental and

Computational Fluid Dynamics

Panel Presentation. IMECE2018-89407

Judith Bamberger,

Pacic Northwest National Laboratory,

Richland, WA, United States

9-8 KIRTI (KARMAN) GHIA CELEBRATION

OF LIFE SYMPOSIUM

9-8-2 Kirti Ghia Celebration of Life – II

Third Floor, David L. Lawrence Convention Center, Room 326

3:45pm–5:30pm

Session Chair: Surya Vanka,

University of Illinois, Champaign,

IL, United States

Session Co-Chair: Mark R. Duignan,

Savannah River National

Laboratory, Aiken, SC, United States

3:45pm – CFD for the Development of Bio-Inspired

Unmanned Vehicles

Technical Presentation. IMECE2018-88982

Ravi Ramamurti, Jason Geder,

Naval Research Laboratory,

Washington, DC, United States

4:06pm – Flow and Heat Transfer Past Turbine Airfoils

Technical Presentation. IMECE2018-89591

Sumanta Acharya, Yousef Kanani,

Illinois Institute of

Technology, Chicago, IL, United States

4:27pm – Multiphase Boundary Layer Models for Aircraft

Icing Simulation

Technical Presentation. IMECE2018-89605

Alric Rothmayer,

Iowa State University, Ames, IA, United

States

4:48pm – Automated Hybrid Volume Mesh Generation With

Adaptive Surface/Volume Reﬁnement

Technical Presentation. IMECE2018-89624

John Steinbrenner, Steve Karman, Jr., Nick Wyman,

Pointwise, Inc., Fort Worth, TX, United States

5:09pm – Utilization of The StreamVane for Boundary Layer

Ingestion Testing

Technical Presentation. IMECE2018-89753

Mark Celestina, Julia Stephens,

NASA Glenn Research

Center, Cleveland, OH, United States

TRACK  FLUIDS ENGINEERING

–

WEDNESDAY, NOVEMBER 

117

9-13 27

SYMPOSIUM ON INDUSTRIAL

FLOWS

9-13-3 Industrial Flows – III

Third Floor, David L. Lawrence Convention Center, Room 321

3:45pm–5:30pm

Session Chair: George Chamoun,

Eastman Kodak, Gray, TN,

United States

Session Co-Chairs: Kevin Anderson,

California State Polytech

University, Pomona, CA, United States,

Nikhil Kumar

Palakurthi,

University of Cincinnati, Cincinnati, OH, United

States

3:45pm – Analyzing the Flow in Annular Gap With a

Restrictor Mounted on Outer Cylinder

Technical Paper Publication. IMECE2018-87207

Guohu Luo, Zhenqiang Yao, Hong Shen, Shengde Wang,

Shanghai Jiao Tong University, Shanghai, China

4:06pm – Bench Scale Experimental Study of Slug Flow

Phenomena Using PID Control

Technical Paper Publication. IMECE2018-88564

Derek Staal, Daniel Schmidt, Jeffery McClung, Mark Behl,

Mayank Tyagi,

Louisiana State University, Baton Rouge, LA,

United States

4:27pm – Pilot Scale Experimental Study of Slug Flow

Phenomena Using PID Control

Technical Paper Publication. IMECE2018-88565

Daniel Schmidt, Jeffery McClung, Mark Behl, Derek Staal,

yank Tyagi,

Louisiana State University, Baton Rouge, LA,

United States

4:48pm – Numerical Simulation and Analysis of Heat

Recovery for Multi-Stage Air Compressors

Technical Presentation. IMECE2018-89705

Yiming Ma, Yi Chu,

FS-Elliott CN Co., Shanghai, China,

Rongxin Zhang, Brad Hayes,

FS-Elliott LLC, Export, PA,

United States,

Xuyang Chi,

FS-Elliott CN Co., Shanghai,

Shanghai, China

THURSDAY, NOVEMBER 15

9-12 4

FORUM ON MULTIPHASE FLOW

WITH BIO-APPLICATIONS

9-12-1 Multiphase Flow With Bio-Applications

Third Floor, David L. Lawrence Convention Center, Room 318

8:55am–10:40am

Session Chair: Ning Zhang,

McNeese State University,

Lake Charles, LA, United States

8:55am – Multiphase Fluid Flow Modeling for Biomedical

Application (Shirodhara)

Technical Presentation. IMECE2018-87432

Swathika M.,

Indian Institute of Technology Madras, Chennai,

Tamil Nadu, India,

B.T. Kannan,

Independent Trainer/

Consultant, Chennai, Tamil Nadu, India,

L. Sugumar,

Sukra Helitek Pvt. Ltd., Chennai, Tamil Nadu, India,

Lakshmana Rao C., Balasubramanian Venkatesh,

Indian

Institute of Technology Madras, Chennai, Tamil Nadu, India

9:16am – Modelling of the Transport of Salinity and Organic

Matters in Sabine Lake

Technical Presentation. IMECE2018-89896

Ning Zhang,

McNeese State University, Lake Charles, LA,

United States

9:37am – Interaction and Coalescence on a Pair of Laser-

Induced Bubbles

Technical Presentation. IMECE2018-89903

Yiwei Wang, Hongchen Li, Jingzhu Wang,

Institute of

Mechanics, Chinese Academy of Sciences, Beijing, China

9-14 SYMPOSIUM ON WIND TURBINES

AERODYNAMICS AND CONTROL

9-14-1 Symposium on Wind Turbines Aerodynamics

and Control

Third Floor, David L. Lawrence Convention Center, Room 319

8:55am–10:40am

Session Chair: Majid Rashidi,

Cleveland State University,

Pepper Pike, OH, United States

8:55am – Aerodynamic Shape Optimization of Diffuser

Augmented Wind Turbine Shrouds Using Asynchronous

Differential Evolution

Technical Paper Publication. IMECE2018-86820

Stavros Leloudas, Georgios Lygidakis, Giorgos Strofylas,

Ioannis Nikolos,

Technical University of Crete, Chania, Greece

9:16am – The Impact of the Wind Power Plant on the Air

Radar’s Functioning

Technical Paper Publication. IMECE2018-86823

Victorita Radulescu,

University Politechnica of Bucharest,

Bucharest, Romania

TRACK  FLUIDS ENGINEERING

–

WEDNESDAY, NOVEMBER 

118

9:37am – Genetic Algorithm-Based Design of Airfoil for the

Root Region of Small Wind Turbines and Performance

Analysis With Gurney Flaps

Technical Paper Publication. IMECE2018-87327

Mohammed Raﬁuddin Ahmed, Krishnil R. Ram,

University

of the South Pacic, Suva, Fiji,

Bum-Suk Kim,

Jeju National

University, Jeju, Korea (Republic),

Sunil P. Lal,

Massey

University, Palmerston, New Zealand

9:58am – Numerical Simulation on Aerodynamic

Performance of Ram Air Turbine Based on Mixed Flow

Field

Technical Paper Publication. IMECE2018-88304

Xiangbo Zhang, Shuiting Ding, Fenzhu Ji, Farong Du,

Beihang University, Beijing, China,

Shengrong Guo,

Nanjing

Engineer Institute of Aircraft System Jincheng, Nanjing, China

9-15 18

INTERNATIONAL SYMPOSIUM ON

MEASUREMENT AND MODELING OF

ENVIRONMENTAL FLOWS

9-15-1 18

International Symposium on

Measurement and Modeling of Environmental Flows

Third Floor, David L. Lawrence Convention Center, Room 323

8:55am–10:40am

Session Chair: S.A. Sherif,

University of Florida, Gainesville,

FL, United States

Session Co-Chair: Kashif Nawaz,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States

8:55am – PittPack: Open-Source FFT-Based Poisson’s

Equation Solver for Computing With Accelerators

Technical Paper Publication. IMECE2018-87697

Jaber Javanshir Hasbestan,

University of Pittsburgh, East

Ridge, TN, United States,

Inanc Senocak,

University of

Pittsburgh, Pittsburgh, PA, United States

9:16am – Front Dynamics in Miscible Displacement Flow in

a Curved Pipe

Technical Paper Publication. IMECE2018-88449

Mohammadreza Yavari, Majid Bazargan,

Khaje Nassir Toosi

Univesrity of Technology, Tehran, Iran,

Elaheh Bagherizadeh,

Stony Brook University, Stony Brook, NY, United States

9:37am – Effect of Wind Speed on Ventilation Flow Through

a Two Dimensional Room Fitted With a Windcatcher

Technical Paper Publication. IMECE2018-88666

Rahil Taghipour, Peter Abdo,

University of Technology

Sydney, Sydney, Australia,

B. Phuoc Huynh,

University of

Technology Sydney, Broadway NSW, Australia

9:58am – Large Eddy Simulation of Turbulent

Freestream/Bed Interactions With Coupled

Surface/Subsurface Momentum Balance

Technical Presentation. IMECE2018-89196

Y. P. Lian, J. D. Dallmann, B. H. Sonin, K. R. Roche,

A. I. Packman, Gregory Wagner,

Northwestern University,

Evanston, IL, United States

10:19am – Interference of Straight and Tapered Cylinder

Pairs Near the First Critical Speed

Technical Presentation. IMECE2018-89883

Rishav Rishav, Srinivas V. Veeravalli,

Indian Institute of

Technology Delhi, Delhi, Delhi, India,

Suhail Ahmad,

Indian

Institute of Technology Delhi, Hauz Khas, New Delhi, Delhi,

India

9-4 24

SYMPOSIUM ON FUNDAMENTAL

ISSUES AND PERSPECTIVES IN FLUID

MECHANICS

9-4-1 Fundamentals and Basic Research

Third Floor, David L. Lawrence Convention Center, Room 318

10:50am–12:35pm

Session Chair: John Buchanan,

UNNPP, Pittsburgh, PA,

United States

Session Co-Chair: Wayne Strasser,

Eastman Chemical Co.,

Kingsport, TN, United States

10:50am – Extracting Substantial Free Energy From Static

Ambient Potential Energy Using Distance, Time-Lapse

Chaos, and Coriolis Principles

Technical Paper Publication. IMECE2018-86128

Jim Surjaatmadja,

Halliburton, Duncan, OK, United States

11:11am – Liquid Sloshing in a Partially-Filled Enclosure

due to Sudden Impact or Periodic Motion

Technical Presentation. IMECE2018-86724

Bakhtier Farouk,

Drexel University, Philadelphia, PA, United

States

11:32am – The Reynolds Stress in Turbulence From an

Alternate Perspective

Technical Paper Publication. IMECE2018-86870

Taewoo Lee,

Arizona State University, Tempe, AZ, United

States

11:53am – Force Decomposition of Medium Reynolds

Number Oscillating Flow Over a Submerged Sphere

Technical Paper Publication. IMECE2018-88187

Aibek Bekkulov,

University of Texas Rio Grande Valley,

Edinburg, TX, United States,

Shehua Huang,

Wuhan

University, Wuhan, Hubei, China,

Ben Xu,

University of Texas

Rio Grande Valley, Edinburg, TX, United States

12:14pm – Effect of Slip Length on Drag Reduction and

Delayed Transition in Laminar Channel Flow

Technical Presentation. IMECE2018-89179

Ethan Davis, Jae Sung Park,

University of Nebraska–Lincoln,

Lincoln, NE, United States

TRACK  FLUIDS ENGINEERING

–

WEDNESDAY, NOVEMBER 

119

9-16 11

FORUM ON FLUID MEASUREMENTS

AND INSTRUMENTATION

9-16-1 Fluid Measurements and Instrumentation – I

Third Floor, David L. Lawrence Convention Center, Room 319

10:50am–12:35pm

Session Chair: Stamatios Pothos,

TSI Incorporated,

Shoreview, MN, United States

10:50am – Digital Processors’ Algorithms Used in Laser

Based Pointwise Measurement Techniques

Technical Presentation. IMECE2018-86837

Stamatios Pothos, Daniel Troolin,

TSI Incorporated,

Shoreview, MN, United States

11:11am – Effect of Passive Green Wall Modules on Air

Temperature and Humidity

Technical Paper Publication. IMECE2018-86963

Peter Abdo,

University of Technology Sydney, Sydney,

Australia,

B. Phuoc Huynh,

Univesrity of Technology Sydney,

Broadway NSW, Australia

11:32am – Volumetric Velocity and Sizing Using Imaging in

Two Phase Flows

Technical Presentation. IMECE2018-87831

Daniel Troolin, Aaron Boomsma, Stamatios Pothos,

TSI

Incorporated, Shoreview, MN, United States

11:53am – Stereoscopic Particle Shadow Velocimetry

Technical Paper Publication. IMECE2018-88013

Jeff Harris, Christine Truong,

Pennsylvania State University,

State College, PA, United States,

Michael McPhail,

Mayo

Clinic, Phoenix, AZ, United States,

Arnie Fontaine,

Pennsylvania State University, State College, PA, United States

12:14pm – Settling Characteristics of Polymeric Additives

in Dodecane

Technical Paper Publication. IMECE2018-88555

Gurjap Singh, Stephen Pitts,

University of Iowa, Iowa City, IA,

United States,

Elio Lopes,

Santa Catarina State University,

Joinville, Santa Catarina, Brazil,

Albert Ratner,

University of

Iowa, Iowa City, IA, United States

9-2 16

SYMPOSIUM ON ELECTRIC,

MAGNETIC AND THERMAL PHENOMENA

IN MICRO- AND NANO-SCALE SYSTEMS

9-2-1 Electric, Magnetic & Thermal Phenomena

Third Floor, David L. Lawrence Convention Center, Room 317

2:05pm–3:50pm

Session Chair: Dennis A. Siginer,

Botswana International

University of Science and Technology & Universidad de

Santiago de Chile, Santiago in Chile & Palapye in Botswana,

Chile

Session Co-Chair: Boris Khusid,

New Jersey Institute of

Technology, Newark, NJ, United States

2:05pm – Characterizing Microﬂuidic Operations

Underlying an Electrowetting Heat Pipe on the International

Space Station

Technical Paper Publication. IMECE2018-86223

Enakshi Wikramanayake, Renee Hale, John Elam, Arjang

Shahriari, Vaibhav Bahadur,

University of Texas at Austin,

Austin, TX, United States,

Angel R. Alvarez-Hernandez,

Nathan Howard,

NASA Johnson Space Center, Houston, TX,

United States

2:26pm – Dielectrophoretic Control of a Droplet at the

Interface of Two Liquids in a Three Liquid System

Technical Paper Publication. IMECE2018-86487

Manojkumar Lokanathan, Enakshi Wikramanayake,

Vaibhav Bahadur, Roger Bonnecaze,

University of Texas at

Austin, Austin, TX, United States

2:47pm – Enhancement in Gas Pumping to Generate

Corona Wind by an EHD Gas Pump

Technical Presentation. IMECE2018-86958

A.K.M. Monayem Mazumder,

Saginaw Valley State University,

Saginaw, MI, United States

3:08pm – Electric Field Control of Propulsion Force of

Chemically Driven Marangoni Locomotor

Technical Presentation. IMECE2018-87233

Shigeki Tsuchitani, Takumi Ikebe, Hirofumi Miki, Kunitomo

kuchi,

Wakayama University, Wakayama, Japan

TRACK  FLUIDS ENGINEERING

–

WEDNESDAY, NOVEMBER 

120

9-4 24

SYMPOSIUM ON FUNDAMENTAL

ISSUES AND PERSPECTIVES IN FLUID

MECHANICS

9-4-2 Computational Methods in Fluid Mechanics

Third Floor, David L. Lawrence Convention Center, Room 318

2:05pm–3:50pm

Session Chair: Taewoo Lee,

Arizona State University, Tempe,

AZ, United States

Session Co-Chair: Wayne Strasser,

Eastman Chemical Co.,

Kingsport, TN, United States

2:05pm – A Central Difference Finite Volume Lattice

Boltzmann Method for Simulation of 2D Inviscid

Compressible Flows on Triangular Meshes

Technical Paper Publication. IMECE2018-86302

Alireza Karbalaei,

University of Central Florida, Orlando, FL,

United States,

Kazem Hejranfar,

Sharif University of

Technology, Tehran, Tehran, Iran

2:26pm – Finite Element Models of One-Dimensional Flows

With Node-Dependent Accuracy

Technical Paper Publication. IMECE2018-86852

Daniele Guarnera, Enrico Zappino, Alfonso Pagani, Erasmo

Carrera,

Politecnico di Torino, Torino, Italy

2:47pm – Characterization of Model-Based Uncertainties in

Incompressible Turbulent Flows by Machine Learning

Technical Paper Publication. IMECE2018-87178

Mustafa Usta,

Lehigh University, Bethlehem, PA, United

States,

Ali Tosyali,

Rutgers, The State University of New

Jersey, Piscataway, NJ, United States

3:08pm – Computational Investigation of Flow Over

Geometry Compliant Lattice Structures

Technical Paper Publication. IMECE2018-87846

James Tinsley,

Honeywell FM&T, Kansas City, MO, United

States,

Kelly Homan,

Missouri University of Science &

Technology, Rolla, MO, United States,

Gregory Vernon,

Honeywell FM&T, Kansas City, MO, United States

3:29pm – Bridging Method of Turbulence for High Reynolds

Number Separated Flows Past Bluff Bodies

Technical Presentation. IMECE2018-89693

Sagar Saroha, Sawan S. Sinha,

Indian Institute of Technology

Delhi, Delhi, Delhi, India,

Sunil Lakshmipathy,

Gexcon AS,

Bergen, Norway

9-16 11

FORUMONFLUID

MEASUREMENTS AND

INSTRUMENTATION

9-16-2 Fluid Measurements and Instrumentation – II

Third Floor, David L. Lawrence Convention Center, Room 319

2:05pm–3:50pm

Session Chair: Ivaylo Nedyalkov,

University of New

Hampshire, Durham, NH, United States

2:05pm – Practical Considerations for Simultaneous LDV

and PIV Measurements

Technical Presentation. IMECE2018-86841

Stamatios Pothos, Daniel Troolin, Aaron Boomsma,

TSI

Incorporated, Shoreview, MN, United States

2:26pm – An Experimental Setup to Characterize Boundary

Layer Asymmetry on a Spinning Projectile Using Magnetic

Resonance Velocimetry

Technical Paper Publication. IMECE2018-87472

Kevin Sullivan,

U.S. Military Academy, Avon Lake, OH, United

States,

Aaron P. Schlenker,

U.S. Military Academy,

Lenhartsville, PA, United States,

Noah W. Siegel,

U.S. Military

Academy, Las Vegas, NV, United States,

Isaiah Valdez,

U.S.

Military Academy, Aztec, NM, United States,

Bret Van Poppel,

Michael Benson,

U.S. Military Academy, West Point, NY,

United States,

Gregory Rodebaugh,

Armament Research

Development and Engineering Center, Picatinny, NJ, United

States,

Christopher Elkins,

Stanford University, Palo Alto, CA,

United States,

Chase Snow,

U.S. Army, West Point, NY, United

States

2:47pm – Weep Hole and Interlayer Gap Flow Within

Layered Pressure Vessels

Technical Paper Publication. IMECE2018-87948

Cameron Coates, Timothy Chastain,

Georgia Southern

University, Savannah, GA, United States

3:08pm – CFD Analysis of Vortex Shedding of an Isolated

Rolling Tire

Technical Presentation. IMECE2018-88443

Navid Goudarzi,

UNCC, Charlotte, NC, United States

3:29pm – Optical Measurement Techniques to Development

Cardiovascular Devices

Technical Presentation. IMECE2018-88630

Keefe Manning,

Pennsylvania State University, University

Park, PA, United States

TRACK  FLUIDS ENGINEERING

–

WEDNESDAY, NOVEMBER 

121

9-4 24

SYMPOSIUM ON FUNDAMENTAL

ISSUES AND PERSPECTIVES IN FLUID

MECHANICS

9-4-3 Fundamental Fluids Engineering and

Applications

Third Floor, David L. Lawrence Convention Center, Room 318

4:00pm–5:45pm

Session Chair: John Buchanan,

UNNPP, Pittsburgh, PA,

United States

Session Co-Chair: Wayne Strasser, Eastman Chemical Co.,

Kingsport, TN, United States

4:00pm – The Effect of Delta Winglet Inclination Angle on

the Vortical Flow Downstream

Technical Paper Publication. IMECE2018-86331

Junguo Wang, David Ting,

University of Windsor, Windsor,

ON, Canada,

Steve Ray,

Essex Energy, Oldcastle, ON, Canada

4:21pm – Numerical Investigation of Velocity Coefﬁcient for

Organic Turbine Nozzles Using MM as Working Fluid

Technical Paper Publication. IMECE2018-87212

Laihe Zhuang, Guoqiang Xu, Jie Wen, Bensi Dong,

Beihang

University, Beijing, China

4:42pm – Analyzing the Shear Heating Effects in Modeling

the Hydrodynamic Lubrication of High Torque Low Speed

Diesel Engine by Considering Different Viscosity-Grade

Lubricants

Technical Paper Publication. IMECE2018-88238

Saqib Naseer,

NUST College of Electrical and Mechanical

Engineering, Rawalpindi, Pakistan,

Syed Adnan Qasim,

NUTECH School of Engineering & Technologies, Islamabad,

Punjab, Pakistan,

Raja Amer Azim,

NUST College of E&ME,

Rawalpindi, Punjab, Pakistan,

Kishwat Ijaz Malik,

University of

Wah, Wah Cant, Punjab, Pakistan

5:03pm – Performance Evaluation of Coefﬁcient of

Performance of Variable Refrigerants Using Vapour

Compression Refrigeration System Model

Technical Presentation. IMECE2018-88774

Cyril Okorowo,

Institute of Management and Technology,

Enugu, Enugu, Nigeria,

Okechukwu T. Onah,

Enugu State

University of Science and Technology, Enugu, Enugu, Nigeria

5:24pm – Organized Motion of Turbulent Flow at Low

Reynolds Number in a Square Duct

Technical Presentation. IMECE2018-89560

Hamid Hassan Khan,

Indian Institute of Technology Delhi,

New Delhi, India, Syed

Fahad Anwer, Nadeem Hasan,

Aligarh

Muslim University, Aligarh, Uttar Pradesh, India,

Sanjeev

Sanghi,

Indian Institute of Technology Delhi, New Delhi, Delhi,

India

TRACK  FLUIDS ENGINEERING

–

WEDNESDAY, NOVEMBER 

122

10-1-1: Analysis of Thermal Systems

10-3-1: K6-2 Numerical Analysis and Performance

Assessment of Energy Systems

10-4-1: System Analysis

10-4-2: Component/Material Design and Analysis

10-6-1: Batteries

10-6-2: Capacitors

10-7-1: Analysis of Radiative Transfer in Energy

Systems

10-7-2: Radiative Properties

10-8-1: Heat Transfer in Passive Thermal Control

Systems

10-10-1: K6-9 Two Phase Transport in Energy Systems

and Non-Equilibrium and Dynamic Energy

Systems

0-11-1: K6-10 Panel on the Key Role of Heat Transfer

Analysis and Methodology in Research

10-13-1: Measurements of Thermophysical Properties

10-14-1: Calculations of Thermophysical Properties 1

10-14-2: Calculations of Thermophysical Properties 2

10-15-1: Fundamentals of Boiling and Evaporation

10-15-2: K8-1 Fundamentals of Boiling

10-15-3: K8-1 Fundamentals of Boiling, Evaporation,

nd Condensation

10-16-1: K8-2 Fundamentals of Single Phase

Convection

10-17-1: Fundamentals of Multi-Scale Modeling

10-18-1: K8-4 Fundamentals of Liquid/Solid Phase

Change (Icing/Deicing, Solidication)

10-20-1: Pan

on Fundamentals of Non-Equilibrium

Transport

10-21-1: K9-1 Thermal Transport across Hard/Soft

Interfaces – I

10-21-2: K9-1 Thermal Transport across Hard/Soft

Interfaces – II

10-21-3: K9-1 Thermal Transport across Hard/Soft

Interfaces – III

10-22-1: K

9-2 Coupled ThermalTransport by Electrons,

Magnons, and Phonons

10-23-1: K9-3 Phononic Crystals and Thermoelectrics –

10-23-2: K9-3 Phononic Crystals and Thermoelectrics –

10-25-1: K9-5 Micro/Nanoscale Phase Change Heat

Transfer – I

10-25-2: K9-5 Micro/Nanoscale Phase Change Heat

ransfer – II

10-26-1: Measurement of Near-FieldThermal Radiation

10-26-2: Theoretical Prediction of Thermal Emission

and Energy Conversion

10-26-3: Radiative Properties and Radiative Transfer in

the Far Field

10-27-1: Thermal Metrology for Nanoscale Heat

Transfer

10-28-1: K9-8 Advances in Simulation Methods

10-29-1: Heat Conduction in 2D Materials/Devices

10-29-2: Heat Transfer Devices and Engineering

10-29-3: Transport a

t Interfaces

10-29-4: T

hermal Conductivity

10-29-5: Thermal Engineering with Plasmonic

Materials

10-29-7: Micro-/Nanoelectronics and Related Issues

10-30-1: Single-Phase Enhanced Heat Transfer –

Numerical Studies – II

10-30-2: Single-Phase Enhanced Heat Transfer –

Numerical Studies – I

10-30-3: Single-Phase Enhanced Heat Transfer –

Numerical Studies – III

10-32-1: CMS – Combustion Power System

10-33-1: CMS – Sprays and Emissions

10-34-1: CMS – Applied Combustion – Modeling Heat

Transfer and Combustion

10-34-2: CMS – Applied Combustion –

Improving

System Performance

10-36-1: K13-1 Heat Transfer in Multiphase Systems – I

10-36-2: K13-1 Heat Transfer in Multiphase Systems

– II

10-36-3: K13-1 Heat Transfer in Multiphase Systems

– III

10-39-1: Gas Turbine Heat Transfer and Cooling

10-40-1: K15-1Transport Phenomena in

Manufacturing and Materials Processing – I

10-40-2: K15-1 Transport Phenomena in

Manufacturing and Materials Processing – II

10-42-1: K16-1: Heat Transfer in Electronic

Equipment – I0-42-2: K16-1: Heat Transfer

in Electronic Equipment – II

10-44-1: Thermal Transport under Microscale and

Rotating Features

10-44-2: Thermal Transport Understanding and Its

Applications

10-47-1: Heat Transfer and H

eat Exc

hange

10-50-1: Heat Transfer in HVAC Systems and Air

Quality and Comfort in Conned Spaces

10-51-1: Thermal Management of Electronic

Equipment

10-53-1: Applications of Computational Heat

Transfer: Convection

10-53-2: Applications of Computational Heat

Transfer: Industrial Applications

0-54-1: Methods in Computational Heat Transfer

10-55-1: Heat Transfer and Fluid Flow Roundtable:

Navigating the Code Landscape

10-55-2: Heat Transfer and Fluid Flow Roundtable:

Navigating the Code Landscape

10-56-1: Panel on Recent Advances in Heat Transfer

Education

10-59-1: Heat and Mass Transport Photogallery

10-60-1: Prof. Frank Kreith Memorial Symposium:

Advances in Heat Transfer, Energy Systems

& Sustainability – I

10-60

-2: Prof. Frank Kreith Memorial Symposium:

Advances in Heat Transfer, Energy Systems

& Sustainability – II

10-60-3: Prof. Frank Kreith Memorial Symposium:

Advances in Heat Transfer, Energy Systems

& Sustainability – III

10-61-1: K8-7 Fundamentals of Boiling and

Condensation – II-B

10-61-2: K8-7 Fundamentals of Condensation,

Transient Boiling, and Dehumidication

10-62-1: Single-Phase Enhanced Heat Transfer –

Applications

10-63-1: Multi-Phase and Passive Enhanced Heat

Transfer

10-63-2: Multi-Phase and Pass

ive Enhan

ced Heat

Transfer

10-64-1: Heat Transfer and Thermal Engineering

Plenary I

10-64-2: Heat Transfer and Thermal Engineering

Plenary II

Track Organizers

John Maulbetsch,

Maulbetsch Consulting, United

States

Kevin Dowding,

Sandia National Laboratories,

United States

Peiwen Li,

University of Arizona, United States

Topic Organizers

Mitra Sexton,

Knolls Atomic Power Lab, United

States

Matthew Schifano,

Naval Nuclear Laboratory,

United States

Alexander Rattner,

The Pennsylvania State

University, United States

Hohyun Lee,

Santa Clara University, United

States

Leitao Chen,

Rice University, United States

Laura Schaefer,

Rice University, United States

Matthew R. Jones,

Brigham Young University,

United States

Rydge Mulford,

Brigham Young University, United

States

David Pratt,

USAF, United States

Nesrin Ozalp,

University of Minnesota Duluth,

United States

Nicholas Roberts,

Utah State University, United

States

Xianming Bai,

Virginia Tech, United States

Amitabh Narain,

Michigan Tech University, United

States

Vaibhav Bahadur,

University of Texas at Austin,

United States

Navdeep Singh Dhillon,

California State

University Long Beach, United States

Sajjad Bigham,

Michigan Technological

University, United States

Alan McGaughey,

Carnegie Mellon University,

United States

Patrick Oosthuizen,

Queen's University, Canada

Chris Kobus,

Oakland University, United States

Oronzio Manca,

Università degli Studi della

Campania, Italy

Amitabh Narain,

Michigan Tech University, United

States

Nicholas Roberts,

Utah State University, United

States

Vaibhav Bahadur,

University of Texas at Austin,

United States

Yan Wang,

University of Nevada, Reno, United

States

Xiulin Ruan,

Purdue University, United States

Liping Wang,

Arizona State University, United

States

Sanjiv Sinha,

University of Illinois, United States

Sangyeop Lee,

University of Pittsburgh, United

States

Dong Liu,

University of Houston, United States

Sandra Boetcher,

Embry-Riddle Aeronautical

University, United States

Subramanyaravi Annapragada,

United

Technologies Research, United States

Gongnan Xie,

Northwestern Polytechnical

University, China

Kashif Nawaz,

Oak Ridge National Laboratory |

ORNL, United States

Cheng-xian Lin,

Florida International University,

United States

Omid Askari,

Mississippi State University, United

States

Like Li,

Mississippi State University, United

States

Albert Ratner,

University of Iowa, United States

Mehdi Esmaeilpour,

Marshall University, United

States

Mohsen Ghamari,

Wilkes University, United

States

Kris Jorgensen,

A. O. Smith, Brookeld, WI,

United States

Abhijit Mukherjee,

California State University,

United States

Vinod Srinivasan,

UMN, Minneapolis, MN, United

States

Scott Thompson,

Auburn University, United

States

Stephen Lynch,

Penn State University, United

States

John Blanton,

Classic Engineering, LLC, United

States

Andrew Nix,

West Virginia University, United

States

Phillip M. Ligrani,

University of Alabama In

Huntsville, United States

Minking Chyu,

University of Pittsburgh, United

States

Patrick Mensah,

Southern University, United

States

Ying Sun,

Mechanical Engineering, Drexel

University, United States

Seungbae Park,

Binghamton University, United

States

Hendrik PJ De Bock,

GE Global Research, United

States

Ankur Jain,

UTA, United States

Qiuwang Wang,

Xi'an Jiaotong University, China

Xinwei Wang,

Iowa State University, United

States

S. A. Sherif,

University of Florida, United States

Michael Pate,

Texas A&M University, United

States

Columbia Mishra,

Intel Corporation, United

States

Shima Hajimirza,

Texas A&M University, United

States

Sandip Mazumder,

Ohio State University, United

States

Aaron Wemhoff,

Villanova University, United

States

Samuel Subia,

Sandia National Laboratories,

United States

John Tencer,

Sandia National Laboratories,

United States

Xiuling Wang,

Purdue University Northwest,

United States

Cheng-xian Lin,

Florida International University,

United States

Elia Merzari,

Argonne National Laboratory, United

States

Leitao Chen,

Rice University, United States

Nenad Miljkovic,

University of Illinois at Urbana-

Champaign, United States

Chang Kyoung Choi,

Michigan Technological

University, United States

Raj M. Manglik,

University of Cincinnati, United

States

Satwindar Sadhal,

University of Southern

California, United States

Navdeep Singh Dhillon,

California State

University Long Beach, United States

Sandra Boetcher,

Embry-Riddle Aeronautical

University, United States

Subramanyaravi Annapragada,

United

Technologies Research, United States

Ebrahim Al-Hajri,

Petroleum Institute of Abu

Dhabi, United Arab Emir.

Amanie Abdelmessih,

California Baptist

University, United States

Mark Kedzierski,

NIST, United States

A. G. Agwu Nnanna,

University of Texas of the

Permian Basin, United States

Ahmed Elatar,

Oak Ridge National Laboratory,

United States

Session Organizers

Mitra Sexton,

Knolls Atomic Power Lab, United

States

Leitao Chen,

Rice University, United States

Diana-Andra Borca-Tasciuc,

Rensselaer Polytech

Instit, United States

C. Thomas Avedisian,

Cornell University, United

States

Isaac Perez-Raya,

Rochester Institute of

Technology, United States

Navdeep Dhillon,

California State University Long

Beach, United States

Chris Kobus,

Oakland University, United States

Alan McGaughey,

Carnegie Mellon University,

United States

Enakshi Wikramanayake,

University of Texas at

Austin, United States

Shalabh Maroo,

Syracuse University, United

States

Yan Wang,

University of Nevada, Reno, United

States

Xiulin Ruan,

Purdue University, United States

Bladimir Ramos,

Penn State University, United

States

Hasan Babaei,

University of Pittsburgh, Carnegie

Mellon University, United States

Yee Kan Koh,

National University of Singapore,

Singapore

Anil Yuksel,

IBM Corporation, United States

Tengfei Luo,

University of Notre Dame, United

States

Ruiqiang Guo,

Caltech, United States

Yanliang Zhang,

University of Notre Dame,

United States

Tianli Feng,

Vanderbilt University/Oak Ridge

National Laboratory, United States

Ruiqiang Guo,

Caltech, United States

Dong Liu,

University of Houston, United States

Chuanhua Duan,

Boston University, United

States

Bo Zhao,

Stanford University, United States

Sheng Shen,

Carnegie Mellon University, United

States

Sheila Edalatpour,

University of Maine, United

States

Zhen Chen,

Southeast University, China

Yongjie Hu,

University of California, Los Angeles

(UCLA), United States

Sanjiv Sinha,

University of Illinois, United States

Yaguo Wang,

University of Texas, United States

Michael Pettes,

LANL MPA-CINT, United States

Neil Zuckerman,

Seagate Technologies, United

States

Yan Wang,

University of Nevada, Reno, United

States

Yee Kan Koh,

National University of Singapore,

Singapore

Edward Kinzel,

Missouri University of Science

and Technology, United States

Yu-bin Chen,

National Tsing Hua University,

Taiwan

Yanbao Ma,

University California, Merced, United

States

Maulik Shelat,

Praxair, United States

Ahmed Elatar,

Oak Ridge National Laboratory,

United States

Omid Askari,

Mississippi State University, United

States

Mohsen Ghamari,

Wilkes University, United

States

Mohsen Ayoobi,

Wayne State University, United

States

Mehdi Esmaeilpour,

Marshall University, United

States

Abhijit Mukherjee,

California State University

Northridge, United States

Stephen Akwaboa,

Southern University and A&M

College, United States

Shima Hajimirza,

Texas A&M University, United

States

Samuel Subia,

Sandia National Laboratories,

United States

Aaron Wemhoff,

Villanova University, United

States

Leitao Chen,

Rice University, United States

Shreyas Chavan,

University of Illinois at Urbana-

Champaign, United States

Muhammad Jahidul Hoque,

University of Illinois

Urbana-Champaign, United States

Sajjad Bigham,

Michigan Technological

University, United States

Enakshi Wikramanayake,

University of Texas at

Austin, United States

Mark Kedzierski,

NIST, United States

Yaroslav Chudnovsky,

Gas Technology Institute,

United States

Amanie Abdelmessih,

California Baptist

University, United States

Ahmed Elatar,

Oak

United States

TRACK 10 HEAT TRANSFER AND THERMAL

ENGINEERING

MONDAY, NOVEMBER 12

10-3 K6-2 NUMERICAL ANALYSIS AND

PERFORMANCE ASSESSMENT OF ENERGY

SYSTEMS

10-3-1 K6-2 Numerical Analysis and Performance

Assessment of Energy Systems

Third Floor, David L. Lawrence Convention Center, Room 323

9:45am–11:30am

Session Chair: Mitra Sexton,

Knolls Atomic Power Lab, Clifton

Park, NY, United States

9:45am – Numerical Simulation of Convection and Heat

Transfer in Unsteady Transverse Tube Banks

Technical Paper Publication. IMECE2018-86897

Ling ling, Wenjie Wang, Mo Yang,

University of Shanghai for

Science and Technology, Shanghai, China

10:06am – Forced Convection Enhancement in a Square

Channel by an EHD Gas Pump

Technical Presentation. IMECE2018-86961

A.K.M. Monayem Mazumder,

Saginaw Valley State University,

Saginaw, MI, United States

10:27am – Numerical Investigation on Simultaneous Effects

of Surface Roughness and Variable Properties on Laminar

Flow in Annular Tubes

Technical Paper Publication. IMECE2018-88288

Morteza Heydari, Amirhossein Bagheri, Hamid Sadat,

Huseyin Bostanci, Seifollah Nasrazadani,

University of North

Texas, Denton, TX, United States

10:48am – Accelerating Evaluation of Converged Lattice

Thermal Conductivity

Technical Presentation. IMECE2018-89007

Guangzhao Qin, Ming Hu,

University of South Carolina,

Columbia, SC, United States

11:09am – The Adiabatic Analysis on Rotary Displacer

Stirling Engine

Technical Paper Publication. IMECE2018-87758

Amirhossein Bagheri, William C. Mullins, Phillip R. Foster,

Huseyin Bostanci,

University of North Texas, Denton, TX,

United States

10-4 K6-3 HEAT TRANSFER ANALYSIS IN

WASTE HEAT RECOVERY SYSTEMS

10-4-2 Component/Material Design and Analysis

Third Floor, David L. Lawrence Convention Center, Room 327

9:45am–11:30am

Session Chair: Hohyun Lee,

Santa Clara University, Santa

Clara, CA, United States

9:45am – Studies on the Hard Chrome Plating in

Reciprocating Air Compressors

Technical Paper Publication. IMECE2018-86532

Aadhithiyan Amutha Kulasekaran,

National Institute of

Technology, Sundergarh, Odisha, India,

Anbarasu

Subramanian,

National Institute of Technology, Rourkela,

Rourkela, Odisha, India

10:06am – Experimental Investigation of Heat Pipe Heat

Exchanger (HPHE) for Waste Heat Recovery Application

Technical Presentation. IMECE2018-88031

Md. Farhan Shakil, A.K.M.M. Morshed,

Bangladesh

University of Engineering & Technology, Dhaka, Bangladesh,

Azzam Salman,

University of South Carolina, West Columbia,

SC, United States,

Titan Paul,

University of South Carolina

Aiken, Aiken, SC, United States

10:27am – Thermomechanical Reliability in Thermoelectric

Power Generators Consisting of Low Thermal Conductivity

Materials

Technical Presentation. IMECE2018-86606

Hee Seok Kim,

University of South Alabama, Mobile, AL,

United States

10:48am – Thermal and Phonon Transport Analysis in 2D

Materials Systems With Record-High Efﬁciency for Wast

Heat Recovery

Technical Presentation. IMECE2018-86053

Joon Sang Kang, Man Li, Yongjie Hu,

University of California,

Los Angeles, Los Angeles, CA, United States

10-21 K9-1 THERMAL TRANSPORT ACROSS

HARD/SOFT INTERFACES

10-21-1 K9-1 Thermal Transport Across Hard/Soft

Interfaces – I

Third Floor, David L. Lawrence Convention Center, Room 325

9:45am–11:30am

Session Chair: Xiulin Ruan,

Purdue University, West Lafayette,

IN, United States

Session Co-Chair: Sangyeop Lee,

University of Pittsburgh,

Pittsburgh, PA, United States

9:45am – Achieving Huge Thermal Conductance of Metallic

Nitride on Graphene Through Enhanced Elastic and

Inelastic Phonon Transmission

Technical Presentation. IMECE2018-89402

Weidong Zheng, Bin Huang, Hongkun Li, Yee Kan Koh,

National University of Singapor ngapor

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

MONDAY, NOVEMBER 

123

10:06am – Nonequilibrium Landauer Approach for Thermal

Interfaces

Technical Presentation. IMECE2018-89938

Jingjing Shi, Xiaolong Yang,

Purdue University, West

Lafayette, IN, United States,

Timothy Fisher,

University of

California, Los Angeles, Los Angeles, CA, United States,

Xiulin

Ruan,

Purdue University, West Lafayette, IN, United States

10:27am – Fullerene-Based Superatomic Crystals? Thermal

Transport Controlled by Orientation Disorder

Technical Presentation. IMECE2018-87762

Matthew Bartnof, Alexander D. Christodoulides,

Carnegie

Mellon University, Pittsburgh, PA, United States,

Wee-Liat

Ong, ZJU-UIUC,

Zhejiang University, Haining, Zhejiang

Province, China,

Evan O’Brien, Xavier Roy,

Columbia

University, New York, NY, United States,

Alan McGaughey,

Jonathan Malen,

Carnegie Mellon University, Pittsburgh, PA,

United States

10:48am – Strain Effect on Thermal Transport in Carbon

Nanotube-Graphene Junctions

Technical Paper Publication. IMECE2018-87764

Jungkyu Park, Paul Pena,

Kennesaw State University,

Marietta, GA, United States

11:09am – Implication of 1D-2D van der Waals

Heterostructures for Pressure Sensors

Technical Presentation. IMECE2018-89083

Yuan Gao, Baoxing Xu,

University of Virginia, Charlottesville,

VA, United States

10-51 K20-1 THERMAL MANAGEMENT OF

ELECTRONIC EQUIPMENT

10-51-1 Thermal Management of Electronic

Equipment

Fourth Floor, David L. Lawrence Convention Center, Room 404

9:45am–11:30am

Session Chair: Columbia Mishra,

Intel Corporation, Hillsboro,

OR, United States

Session Co-Chairs: Vaibhav Bahadur,

University of Texas at

Austin, Austin, TX, United States,

Shima Hajimirza,

Texas A&M

University, College Station, TX, United States

9:45am – Design and Testing of Liquid Cooled Thermal

Solution for High Loading (Socket P) Processors

Technical Paper Publication. IMECE2018-86730

Anali Soto, Veronica Torreblanca,

Intel, Zapopan, Jalisco,

Mexico,

Devdatta Kulkarni,

Intel, Hillsboro, OR, United States

10:06am – Spray Cooling-Based Thermal Management of

Extreme Power Densities Using Orthotropic Composite

Heat Spreaders

Technical Presentation. IMECE2018-87708

Huseyin Bostanci, Sai S. Obuladinne,

University of North

Texas, Denton, TX, United States

10:27am – Raising Inlet Air Temperature for a Hybrid-

Cooled Server Retroﬁtted With Liquid Cooled Cold Plates

Technical Paper Publication. IMECE2018-88497

Uschas Chowdhury, Ashwin Siddarth, Manasa Sahini,

Dereje Agonafer,

University of Texas at Arlington, Arlington,

TX, United States

10:48am – Feasibility Study of Effective Cooling Through

Microchannel Heat Sink (MCHS) and Nanoﬂuid

Applications

Technical Paper Publication. IMECE2018-88690

Darryl Jennings, Jr., Sonya Smith,

Howard University,

Washington, DC, United States

11:09am – Wake Vortex Regimes in Airﬂows Generated by

Piezoelectric Fans and Their Effect on the Mean Air Jet

Technical Presentation. IMECE2018-89181

Navid Dehdari Ebrahimi, Y. Sungtaek Ju,

University of

California, Los Angeles, Los Angeles, CA, United States

10-59 K22-1 HEAT AND MASS TRANSPORT

PHOTOGALLERY

10-59-1 Heat and Mass Transport Photogallery

Third Floor, David L. Lawrence Convention Center, Room 326

9:45am–11:30am

Session Chair: Shreyas Chavan,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States

Session Co-Chair: Muhammad Jahidul Hoque,

University of

Illinois at Urbana-Champaign, Urbana, IL, United States

Coalescence-Induced Droplet Jumping on

Superhydrophobic Nanostructured, Superhydrophobic

Hierarchical, and Biphilic Hierarchical Surfaces

Poster Presentation. IMECE2018-86903

Xiao Yan, Soumyadip Sett, Lezhou Feng, Leicheng Zhang,

University of Illinois at Urbana-Champaign, Urbana, IL, United

States,

Zhiyong Huang, Feng Chen,

Tsinghua University,

Beijing, Beijing, China,

Nenad Miljkovic,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States

Dynamic Defrosting on Superhydrophobic and Bi-Philic

Surfaces

Poster Presentation. IMECE2018-86943

Shreyas Chavan, Kalyan Boyina, Kirk Fortelka, Maury Lira,

Peter Sokalski, Deokgeun Park, Nenad Miljkovic,

University

of Illinois at Urbana-Champaign, Urbana, IL, United States

Water Vapor Condensation on Bi-Conductive Surfaces

Poster Presentation. IMECE2018-87081

Moonkyung Kim, Xiao Yan, Sean Ebihara, Irene Andsager,

Nenad Miljkovic,

University of Illinois at Urbana-Champaign,

Urbana, IL, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

MONDAY, NOVEMBER 

124

Flow Visualization of Microscale Effusion and Transpiration

Cooling on Semi-Cylinder for Gas Turbine Cooling

Application

Technical Presentation. IMECE2018-87257

Dong Hwan Shin, Seongsik Moon, Jin Sub Kim, Do Won

Kang, Jeong Lak Sohn, Jungho Lee,

Korea Institute of

Machinery & Materials, Deajeon, Korea (Republic)

Visualization of Two-phase Bursting Flow inside the Entire

Thermosyphon at Different Filling Ratios

Technical Presentation. IMECE2018-87269

Yeonghwan Kim, Dong Hwan Shin, Jin Sub Kim,

Korea

Institute of Machinery & Materials, Deajeon, Korea (Republic),

Seung M. You,

The University of Texas at Dallas, Richardson,

TX, United States,

Jungho Lee,

Korea Institute of Machinery &

Materials, Deajeon, Korea (Republic)

Dropwise Condensation of Ethanol on Lubricant-Infused

Surfaces

Poster Presentation. IMECE2018-87283

Soumyadip Sett, Longnan Li, Kalyan Boyina, Peter

Sokalski, Xiao Yan, Nenad Mil

jkovic,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States

Visualization Study on Hydrodynamics and Material

Deformation of Zirconium Wire by Transient Pool Boiling

Poster Presentation. IMECE2018-87287

Jun-young Kang, SeungHyun Hong, Byong-Guk Jeon, Yong

Seok Choi, Seok Cho, Jong-Kuk Park, Sang-Ki Moon,

Korea Atomic Energy Research Institute, Daejeon, Korea

(Republic)

Cicada-Inspired Self-Cleaning Superhydrophobic Surfaces

Poster Presentation. IMECE2018-87924

Junho Oh, Sabrina Yin, Shreyas Chavan, Catherine Dana,

University of Illinois at Urbana-Champaign, Urbana, IL, United

States,

Sungmin Hong, Jessica Roman, Kyoo Jo, Donald M.

Cropek,

Army Construction Engineering Research Laboratory,

Champaign, IL, United States,

Marianne Alleyne, Nenad

Miljkovic,

University of Illinois at Urbana-Champaign, Urbana,

IL, United States

Visualization of Droplet Nucleation on Patterned Hybrid

Surfaces

Poster Presentation. IMECE2018-88092

Muhammad Jahidul Hoque, Seok Kim, Nenad Miljkovic,

University of Illinois at Urbana-Champaign, Urbana, IL, United

States

Visualizing Conﬁned Boiling of Self-Assembled Liquid

Bridges for Electronics Cooling

Technical Presentation. IMECE2018-88922

Thomas Foulkes, Shreyas Chavan, Junho Oh,

University of

Illinois at Urbana-Champaign, Urbana, IL, United States,

Robert Pilawa,

University of California, Berkeley, Berkeley, CA,

United States,

Nenad Miljkovic,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States

10-60 PROF. FRANK KREITH MEMORIAL

SYMPOSIUM: ADVANCES IN HEAT

TRANSFER, ENERGY SYSTEMS &

SUSTAINABILITY

10-60-1 Prof. Frank Kreith Memorial Symposium:

Advances in Heat Transfer, Energy Systems &

Sustainability – I

Third Floor, David L. Lawrence Convention Center, Room 324

9:45am–11:30am

Session Chair: Raj M. Manglik,

University of Cincinnati,

Cincinnati, OH, United States

Session Co-Chairs: Satwindar Sadhal,

University of Southern

California, Los Angeles, CA, United States,

John Maulbetsch,

Maulbetsch Consulting, Menlo Park, CA, United States

9:45am – Sunrise Delayed but the Sun Shines Brightly:

The Legacy of Professor Frank Kreith

Technical Presentation. IMECE2018-86304

Raj M. Manglik,

University of Cincinnati, Cincinnati, OH,

United States

10:06am – Thirst for Power: Energy, Water and Human

Survival

Technical Presentation. IMECE2018-86320

Michael E. Webber,

University of Texas at Austin, Austin, TX,

United States

10:27am – Multi-Scale Modeling of Power Plant

Performance Enhancement Using Asynchronous Thermal

Storage and Heat Rejection

Technical Paper Publication. IMECE2018-88107

Lauren B. Gagnon, Dre Helmns, Van P. Carey,

University of

California, Berkeley, Berkeley, CA, United States

10:48am – How Long is the Lull? Supply and Demand

Responses to Wind and Solar Variability

Technical Presentation. IMECE2018-89623

Robert Socolow,

Princeton University, Princeton, NJ, United

States

11:09am – Bringing Solar Hot Water to a Navajo School in

Breadsprings, New Mexico Using CPC Stationary

Concentrators

Technical Presentation. IMECE2018-90055

Joseph J. O’Gallagher,

Alternative Energy Solutions,

Flossmoor, IL, United States,

Roland Winston,

University of

California, Merced, Merced, CA, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

MONDAY, NOVEMBER 

125

10-4 K6-3 HEAT TRANSFER ANALYSIS IN

WASTE HEAT RECOVERY SYSTEMS

10-4-1 System Analysis

Third Floor, David L. Lawrence Convention Center, Room 323

1:45pm–3:30pm

Session Chair: Alexander Rattner,

Pennsylvania State

University, University Park, PA, United States

1:45pm – Thermodynamic Analysis and Multi-Objective

Optimizations of a Combined Recompression sCO

Brayton Cycle: tCO

Rankine Cycles for Waste Heat

Recovery

Technical Paper Publication. IMECE2018-86844

Ali Alsagri,

University of Dayton, Beavercreek, OH, United

States,

Andrew Chiasson, Ahmad A. Aljabr,

University of

Dayton, Dayton, OH, United States

2:06pm – Simple Analytic Model for Optimally Sizing

Thermoelectric Generator Module Arrays

Technical Presentation. IMECE2018-87145

Alexander Rattner,

Pennsylvania State University, University

Park, PA, United States

2:27pm – Efﬁciency Improvement in Small Internal

Combustion Engine Using Exhaust Heat Recovery System

Technical Paper Publication. IMECE2018-87565

Shashank Rai, Selin Arslan,

Lawrence Technological

University, Southeld, MI, United States,

Badih Jawad,

Lawrence Technological University, Dearborn Heights, MI,

United States

2:48pm – Uniquely Designed Solar Tube in a Natural/Forced

Mini-Water Heating System

Technical Paper Publication. IMECE2018-86896

Amanie Abdelmessih,

California Baptist University, Diamond

Bar, CA, United States,

Siddiq/S.S. Mohammed,

California

Baptist University, Riverside, CA, United States

3:09pm – Performance Prediction Modeling of a Full-Scale

Electrostatic Precipitator

Technical Presentation. IMECE2018-89748

Abu Nayem Md. Asraf Siddiquee,

Arkansas State University,

Jonesboro, AR, United States,

Kwangkook Jeong,

Arkansas

State University, State University, AR, United States,

Shinku

Lee, Eungchul Lee,

Doosan Heavy Industries & Construction

Co. Ltd., Gyeongnam, Korea (Republic)

10-20 K8-6 PANEL ON FUNDAMENTALS OF

NON-EQUILIBRIUM TRANSPORT (JOINT

WITH K9)

10-20-1 Panel on Fundamentals of Non-Equilibrium

Transport

Third Floor, David L. Lawrence Convention Center, Room 326

1:45pm–3:30pm

Session Chair: Yan Wang,

University of Nevada, Reno, Reno,

NV, United States

Session Co-Chair: Xiulin Ruan,

Purdue University, West

Lafayette, IN, United States

1:45pm – Non-Equilibrium Transport in Two-Dimensional

Materials

Panel Presentation. IMECE2018-90005

Xianfan Xu,

Purdue University, West Lafayette, IN, United

States

2:06pm – Optical Generation and Detection of Non-

Equilibrium Phonons and Magnons

Panel Presentation. IMECE2018-90032

Li Shi,

University of Texas, Austin, TX, United States

2:27pm – Role of Ballistic Electron Transport and Electron-

Injection on thermal Conductance Across Metal/Non-Metal

Interfaces

Panel Presentation. IMECE2018-90063

Patrick E. Hopkins,

University of Virginia, Charlottesville, VA,

United States

2:48pm – A Multi-Temperature Model for Non-Equilibrium

Thermal Transport

Panel Presentation. IMECE2018-90058

Xiulin Ruan,

Purdue University, West Lafayette, IN, United

States

10-21 K9-1 THERMAL TRANSPORT ACROSS

HARD/SOFT INTERFACES

10-21-2 K9-1 Thermal Transport Across Hard/Soft

Interfaces – II

Third Floor, David L. Lawrence Convention Center, Room 325

1:45pm–3:30pm

Session Chair: Bladimir Ramos,

Pennsylvania State University,

University Park, PA, United States

Session Co-Chair: Hasan Babaei,

University of Pittsburgh,

Carnegie Mellon University, Pittsburgh, PA, United States

1:45pm – Prediction of Spectral Contribution to Thermal

Boundary Conductance Between Dissimilar Materials

Exhibiting Extreme Interfacial Bond Strengths

Technical Presentation. IMECE2018-87554

James Moughamian, William Yorgason, Nicholas Roberts,

Utah State University, Logan, UT, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

MONDAY, NOVEMBER 

126

2:06pm – Heat Transfer Across Crystalline and Amorphous

Silicon Surfaces in Contact With Water and the Effects of

the Interfacial Liquid Structuring

Technical Paper Publication. IMECE2018-86497

Luis E. Paniagua-Guerra, C. Ulises Gonzalez-Valle,

Pennsylvania State University, State College, PA, United

States,

Bladimir Ramos,

Pennsylvania State University,

University Park, PA, United States

2:27pm – Interfacial Heat Transfer Between Erythritol and

Xylitol Crystals as a Mixture Heat Storage Material

Technical Paper Publication. IMECE2018-87195

Biao Feng, Liwu Fan,

Zhejiang University, Hangzhou,

Zhejiang, China

2:48pm – Heat Transfer Across 3C-SiC-Water Interfaces:

Solid-Liquid Afﬁnity, Interfacial Structuring, and Spectral

Characteristics

Technical Presentation. IMECE2018-88890

C. Ulises Gonzalez-Valle,

Pennsylvania State University, State

College, PA, United States,

Bladimir Ramos,

Pennsylvania

State University, University Park, PA, United States

3:09pm – TX-100 Capped Iron Oxide Nanoparticle

Transformation and Implications for Induction Heating and

Hyperthermia Treatment

Technical Presentation. IMECE2018-87556

Hayden Carlton, David Huitink,

University of Arkansas,

Fayetteville, AR, United States

10-40 K15-1 TRANSPORT PHENOMENA IN

MANUFACTURING AND MATERIALS

PROCESSING

10-40-1 K15-1 Transport Phenomena in

Manufacturing and Materials Processing – I

Third Floor, David L. Lawrence Convention Center, Room 327

1:45pm–3:30pm

Session Chair: Patrick Mensah,

Southern University, Baton

Rouge, LA, United States

Session Co-Chair: Stephen Akwaboa,

Southern University

and A&M College, Baton Rouge, LA, United States

1:45pm – Defects Evaluation of Selective Laser Melting

Stainless Steel 316 Parts Using Positron Annihilation

Lifetime Measurement

Technical Paper Publication. IMECE2018-86729

Hong Yao,

Louisiana State University, Baton Rouge, LA,

United States,

Ryan Katona,

University of Virginia,

Charlottesville, VA, United States,

Jianren Zhou,

Louisiana

State University, Baton Rouge, LA, United States,

Md. Islam,

Louisiana State University, Baton Rouge, LA, United States,

Jonathan Raush,

ULL, Lafayette, LA, United States,

Fengyuan Lu, Shengmin Guo,

Louisiana State University,

Baton Rouge, LA, United States

2:06pm – Scale Up of Powder Flow and Heat Transfer in

Rotary Kilns

Technical Presentation. IMECE2018-89951

Bereket Yohannes, Anna Nachtigal, William Borghard,

Fernando Muzzio, Benjamin Glasser, Alberto Cuitino,

Rutgers University, Piscataway, NJ, United States

2:27pm – Phase Evolution and Corrosion Performance of

Laser Processed Oxide Dispersion Strengthened Ferritic

Alloys

Technical Paper Publication. IMECE2018-86736

Ali Hemmasian Ettefagh, Hao Wen, Fengyuan Lu, Shengmin

Guo,

Louisiana State University, Baton Rouge, LA, United

States

2:48pm – Atomistic Modeling of Ga Doping of Crystalline Si

by Focused Ion Beam

Technical Presentation. IMECE2018-89933

Srilok Srinivasan,

Iowa State University, Ames, IA, United

States,

Ganesh Balasubramanian,

Lehigh University,

Bethlehem, PA, United States,

Zayd Leseman,

Kansas State

University, Manhattan, KS, United States

10-54 K20-4 METHODS IN

COMPUTATIONAL HEAT TRANSFER

10-54-1 Methods in Computational Heat Transfer

Fourth Floor, David L. Lawrence Convention Center, Room 404

1:45pm–3:30pm

Session Chair: Cheng-xian Lin,

Florida International University,

Miami, FL, United States

Session Co-Chair: Xiuling Wang,

Purdue University Northwest,

Hammond, IN, United States

1:45pm – Effects of Vacancy Cluster Defects on Phonon

Transport of the Phase Change Material GeTe Using a

Neural Network Interatomic Potential

Technical Presentation. IMECE2018-89390

Ruiqiang Guo, Sangyeop Lee,

University of Pittsburgh,

Pittsburgh, PA, United States

2:06pm – A Transient Approach to Determine Heat Source

Strength and Location in a Wall Plume

Technical Presentation. IMECE2018-89809

Ardeshir Bangian Tabrizi,

Rutgers University, New Brunswick,

NJ, United States,

Yogesh Jaluria,

Rutgers University,

Piscataway, NJ, United States

2:27pm – Applying a Radiative Heat Transfer Finite-Volume

Methodology to a Geometrically Complex Furnace

Technical Paper Publication. IMECE2018-86831

Georgios Lygidakis, Stavros Leloudas, Ioannis Nikolos,

Technical University of Crete, Chania, Greece

2:48pm – An Integrated Method of FVM and SPH for

Treating Melting Process of Quartz Ingot

Technical Paper Publication. IMECE2018-86113

Zhongyi Liu, Jing Wa

ng, Qianli Ma, Haisheng Fang,

Huazhong University of Science & T

China

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

MONDAY, NOVEMBER 

127

3:09pm – Heat Transfer Enhancement in Wavy Micro-

Channels Through Multiharmonic Surfaces

Technical Paper Publication. IMECE2018-86425

Justin Moon,

California State University, Los Angeles, Los

Angeles, CA, United States,

J. Rafael Pacheco,

SAP America

Inc., Tempe, AZ, United States,

Arturo Pacheco-Vega,

California State University, Los Angeles, Los Angeles, CA,

United States

10-60 PROF. FRANK KREITH MEMORIAL

SYMPOSIUM: ADVANCES IN HEAT

TRANSFER, ENERGY SYSTEMS &

SUSTAINABILITY

10-60-2 Prof. Frank Kreith Memorial Symposium:

Advances in Heat Transfer, Energy Systems &

Sustainability – II

Third Floor, David L. Lawrence Convention Center, Room 324

1:45pm–3:30pm

Session Chair: Satwindar Sadhal,

University of Southern

California, Los Angeles, CA, United States

Session Co-Chairs: John Maulbetsch,

Maulbetsch Consulting,

Menlo Park, CA, United States,

Raj M. Manglik,

University of

Cincinnati, Cincinnati, OH, United States

1:45pm – Recent Advances in Thermal Energy Storage

Using Phase Change Materials

Technical Presentation. IMECE2018-88900

D. Yogi Goswami,

University of South Florida, Tampa, FL,

United States

2:06pm – Experimental and Economic Evaluation of Some

Promising Flat Plate Solar Collectors

Technical Presentation. IMECE2018-88779

Noam Lior,

University of Pennsylvania, Philadelphia, PA,

United States

2:27pm – Future Scenarios for Emissions From Energy and

Power Production in the Rocky Mountain Region

Technical Paper Publication. IMECE2018-87614

Rene Nsanzineza, Jana Milford,

University of Colorado

Boulder, Boulder, CO, United States

2:48pm – Near Term Prospects for Solar Syngas and

Hydrogen

Technical Presentation. IMECE2018-89758

Jane Davidson,

University of Minnesota, Wayzata, MN, United

States

3:09pm – Forced Convection in High Porosity Metal Foams

in a Square Duct in Presence of an Array of Impinging Jets

Technical Presentation. IMECE2018-88939

Roop Mahajan,

Virginia Tech, Blacksburg, VA, United States,

Prashant Singh,

North Carolina State University, Raleigh, NC,

United States

10-6 K6-5 THERMAL MANAGEMENT OF

BATTERY SYSTEMS

10-6-1 Batteries

Third Floor, David L. Lawrence Convention Center, Room 325

3:45pm–5:30pm

Session Chair: Leitao Chen,

Rice University, Houston, TX,

United States

Session Co-Chair: Laura Schaefer,

Rice University, Houston,

TX, United States

3:45pm – In Situ Characterization of the Thermal, Ionic, and

Mechanical Behaviors of Lithium Ion Batteries for

Advanced Thermal Management

Technical Presentation. IMECE2018-86049

Yongjie Hu, Joon Sang Kang, Ming Ke,

University of

California, Los Angeles, Los Angeles, CA, United States

4:06pm – 3D-Printed PCM/HDPE Composites for Battery

Thermal Management

Technical Paper Publication. IMECE2018-86081

Thomas Freeman,

Embry-Riddle Aeronautical University,

Carthage, NC, United States,

Kaloki Nabutola, David Spitzer,

Patrick Currier, Sandra Boetcher,

Embry-Riddle Aeronautical

University, Daytona Beach, FL, United States

4:27pm – A Comprehensive Parametric Study of

Minichannel Based Liquid Cooling of Li-Ion Battery Pack

Technical Paper Publication. IMECE2018-87923

Zhoujian An, Krishna Shah,

University of California, Merced,

CA, United States,

Yanbao Ma,

University of California,

Merced, Merced, CA, United States,

Jia Li,

Beijing Jiaotong

University, Beijing, China

4:48pm – Development of a Nine-Cell Hybrid Heat Sink for

Thermal Management of Hot-Spots—Concentrated

Photovoltaic Applications

echnical Presentation. IMECE2018-88839

Ibrahim Hassan, Ahmad Almomani, Danish Rahman,

Aziz Rahman,

Texas A&M University at Qatar, Doha, Qatar,

Yasser Al Hamidi,

Texas A&M University, College Station, TX,

United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

MONDAY, NOVEMBER 

128

10-8 K6-7 HEAT TRANSFER IN PASSIVE

THERMAL CONTROL SYSTEMS

10-8-1 Heat Transfer in Passive Thermal Control

Systems

Third Floor, David L. Lawrence Convention Center, Room 327

3:45pm–5:30pm

Session Chair: Rydge Mulford,

Brigham Young University,

Provo, UT, United States

3:45pm – A 1-kW Day-and-Night Radiative Cooling System

for Cold Water Generation

Technical Presentation. IMECE2018-88495

Ablimit Aili, Dongliang Zhao, Yao Zhai, Jiatao Lu, Dillon

Kidd, Nicolas Seitz, Alexander Savage,

University of

Colorado Boulder, Boulder, CO, United States,

Gang Tan,

University of Wyoming, Laramie, WY, United States,

Xiaobo

Yin, Ronggui Yang,

University of Colorado Boulder, Boulder,

CO, United States

4:06pm – Dynamic Temperature Control via Actuation of a

Deployable/Retractable Radiator

Technical Presentation. IMECE2018-88891

Rydge Mulford, Lance Hyatt, Samuel Salt, Ernest Lee,

Brigham Young University, Provo, UT, United States,

Vivek

Dwivedi,

NASA Goddard, Greenbelt, MD, United States,

Matthew R. Jones, Brian D. Iverson,

Brigham Young

University, Provo, UT, United States

4:27pm – Sub-Ambient Passive Daytime Radiative Cooling

Using a Directional Approach

Technical Presentation. IMECE2018-89481

Bikram Bhatia, Arny Leroy, Yichen Shen, Lin Zhao, Melissa

Gianello, Duanhui Li, Tian Gu, Juejun Hu, Marin Soljacic,

Evelyn Wang,

Massachusetts Institute of Technology,

Cambridge, MA, United States

4:48pm – The Solid-State Electrocaloric Refrigeration With

Unimorph Beam and Its Analytical Model

Technical Paper Publication. IMECE2018-88634

Zhimin Sun, Qing-Ming Wang, William Slaughter, University

of Pittsburgh, Pittsburgh, PA, United States

5:09pm – Device-Level Thermodynamic Model for an

Electrocaloric Cooler

Technical Presentation. IMECE2018-86433

Jie Gong, Alan McGaughey,

Carnegie Mellon University,

Pittsburgh, PA, United States

10-22 K9-2 COUPLED THERMAL

TRANSPORT BY ELECTRONS, MAGNONS,

AND PHONONS

10-22-1 K9-2 Coupled Thermal Transport by

Electrons, Magnons, and Phonons

Third Floor, David L. Lawrence Convention Center, Room 326

3:45pm–5:30pm

Session Chair: Tengfei Luo,

University of Notre Dame, Notre

Dame, IN, United States

Session Co-Chair: Ruiqiang Guo,

Caltech, Pasadena, CA,

United States

3:45pm – Crystalline Polymer Nanoﬁbers With Ultra-High

Thermal Conductivity and Strength

Invited Presentation. IMECE2018-89242

Sheng Shen,

Carnegie Mellon University, Pittsburgh, PA,

United States

4:27pm – Magnon and Phonon Dispersion, Lifetime and

Thermal Conductivity of Iron From Spin-Lattice Dynamics

Simulations

Technical Presentation. IMECE2018-86297

Xufei Wu, Zeyu Liu, Tengfei Luo,

University of Notre Dame,

Notre Dame, IN, United States

4:48pm – Atomistic Simulations of Phononic and Magnonic

Thermal Transport in Magnetic Materials

Technical Presentation. IMECE2018-88860

Yanguang Zhou,

University of California, Los Angeles, Los

Angeles, CA, United States,

Julien Tranchdia,

Sandia National

Laboratories, Albuquerque, NM, United States,

Yijun Ge,

Timothy S. Fisher, Jayathi Murthy,

University of California,

Los Angeles, Los Angeles, CA, United States

5:09pm – Tuning Electronic Heat Transport in

Graphene/Metal Heterostructures With Ultralow Thermal

Conductivity

Technical Presentation. IMECE2018-89400

Bin Huang, Weidong Zheng, Yee Kan Koh,

National

University of Singapore, Singapore, Singapore

10-32 K11-1 CMS—COMBUSTION POWER

SYSTEMS

10-32-1 CMS—Combustion Power System

Third Floor, David L. Lawrence Convention Center, Room 323

3:45pm–5:30pm

Session Chair: Omid Askari,

Mississippi State University,

Mississippi State, MS, United States

3:45pm – An Integrated Design for a Portable Methanol

Fuel Microcombustion-Thermoelectric Coupled Power

Device

Technical Presentation. IMECE2018-88186

Bhanu Prakash Reddy Guggilla, Alexander Rusted, Bruce

Barrett, Ryan Moran, Navroop Kaur, Smitesh Bakrania,

Rowan University,

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

MONDAY, NOVEMBER 

129

4:06pm – Automated Engine Calibration Optimization Using

Online Extremum Seeking

Technical Paper Publication. IMECE2018-87911

Ripudaman Singh, Andrew Mansﬁeld, Margaret

Wooldridge,

University of Michigan, Ann Arbor, MI, United

States

4:27pm – Characteristics of a Non-Premixed Rotating

Detonation Combustor Using Natural Gas-Hydrogen Blend

at Elevated Air-Preheat Temperature and Backpressure

Technical Paper Publication. IMECE2018-88569

Arnab Roy, Donald Ferguson, Todd Sidwell, Peter Strakey,

National Energy Technology Laboratory, Morgantown, WV,

United States

4:48pm – Micro Combustor Development Using Hydrogen

as Fuel

Technical Paper Publication. IMECE2018-88659

Ronak Shah,

ADIT, Anand, Gujarat, India,

Digvijay

Kulshreshtha, Nisarg Chaudhari,

C K Pithawala College of

Engineering and Technology, Surat, Gujarat, India

5:09pm – Performance and Emissions Analysis of Partially

Pre-Mixed Charge Compression Ignition Combustion

Technical Paper Publication. IMECE2018-86410

Charu V. Srivatsa, Jonathan Mattson, Christopher Depcik,

University of Kansas, Lawrence, KS, United States

10-42 K16-1: HEAT TRANSFER IN

ELECTRONIC EQUIPMENT

10-42-1 K16-1: Heat Transfer in Electronic

Equipment – I

Fourth Floor, David L. Lawrence Convention Center, Room 404

3:45pm–5:30pm

Session Chair: Seungbae Park,

Binghamton University,

Binghamton, NY, United States

Session Co-Chair: Hendrik PJ De Bock,

GE Global Research,

Schenectady, NY, United States

3:45pm – Two-Wavelength Thermoreﬂectance and Its

Application in Temperature Measurement of Micro-

Electronic Devices

Technical Paper Publication. IMECE2018-87989

Hongjie Zhang, Sy-Bor Wen,

Texas A&M University, College

Station, TX, United States

4:06pm – Experimental Evaluation of a Dual Taper Manifold

in a Thermosiphon Loop for Data Center Application

Technical Presentation. IMECE2018-88799

Aranya Chauhan, Satish Kandlikar,

Rochester Institute of

Technology, Rochester, NY, United States

4:27pm – Heat Transfer Analysis of a High Capacity

Thermal Battery

Technical Presentation. IMECE2018-89187

Mun Goung Jeong,

KAIST, Daejeon, Korea (Republic),

Jang-Hyeon Cho,

Agency for Defense Development, Daejeon,

Korea (Republic),

Bong Jae Lee,

KAIST, Daejeon, Korea

(Republic)

4:48pm – Temperature Measurement of M.2 NVMe Solid

State Drive Using Infrared Thermometry

Technical Presentation. IMECE2018-89153

Eung Chang Lee, Jinsung Rho,

KAIST, Daejeon, Korea

(Republic),

Heeyoub Kang,

Samsung Electronics, Suwon,

Korea (Republic),

Bong Jae Lee,

KAIST, Daejeon, Korea

(Republic)

5:09pm – Constructal Design Development in China

Technical Presentation. IMECE2018-88892

Lingen Chen,

Naval University of Engineering, Wuhan, China

10-60 PROF. FRANK KREITH MEMORIAL

SYMPOSIUM: ADVANCES IN HEAT

TRANSFER, ENERGY SYSTEMS &

SUSTAINABILITY

10-60-3 Prof. Frank Kreith Memorial Symposium:

Advances in Heat Transfer, Energy Systems &

Sustainability – III

Third Floor, David L. Lawrence Convention Center, Room 324

3:45pm–5:30pm

Session Chair: John Maulbetsch,

Maulbetsch Consulting,

Menlo Park, CA, United States

Session Co-Chairs: Satwindar Sadhal,

University of Southern

California, Los Angeles, CA, United States,

Raj M. Manglik,

University of Cincinnati, Cincinnati, OH, United States

3:45pm – Toward Optimal Operation of Thermal Systems

Technical Presentation. IMECE2018-88920

Yogesh Jaluria,

Rutgers University, Piscataway, NJ, United

States

4:06pm – Challenges in the Heat and Mass Transfer

Aspects of Comfort Cooling: Separating Sensible and

Latent Loads—Material Constraints and New Opportunities

Technical Presentation. IMECE2018-86719

William Worek,

Texas A&M University - Kingsville, Corpus

Christi, TX, United States

4:27pm – Interdisciplinary Network of Sustainable

Engineering and Its Application to Built Environment

Technical Presentation. IMECE2018-88789

Cem Keskin, M. Pinar Menguc,

Ozyegin University, Istanbul,

Turkey

4:48pm – Improvements in Distributed Power Generation

and Waste Heat Recovery (Including Data Center Cooling)

Based on Signiﬁcantly Reduced Air-Side Thermal

Resistances and Enhanced Flow-Boiling

Technical Presentation. IMECE2018-86344

Amitabh Narain,

Michigan Tech University, Houghton, MI,

United States,

Vibhu Vivek,

Vivek Technologies LLC, Santa

Clara, CA, United States,

Hrishikesh Ranga Prasad, Nikhil

Shinde, Soroush Sepahyar,

Michigan Technological

University, Houghton, MI, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

MONDAY, NOVEMBER 

130

5:09pm – Array Jet Impingement Onto High Porosity Thin

Metal Foams at Zero Jet-to-Foam Spacing

Technical Paper Publication. IMECE2018-87915

Prashant Singh,

North Carolina State University, Raleigh, NC,

United States,

Mingyang Zhang, Jaideep Pandit, Roop

Mahajan,

Virginia Polytechnic Institute & State University,

Blacksburg, VA, United States

TUESDAY, NOVEMBER 13

10-64 HEAT TRANSFER AND THERMAL

ENGINEERING PLENARIES

10-64-1 Heat Transfer and Thermal Engineering

Plenary I

Third Floor, David L. Lawrence Convention Center, Room 306

8:00am–8:45am

8:00am – Multiscale Modeling of Nanoparticle Transport:

Applications to Targeted Drug

Plenary Presentation. IMECE2018-90102

Portonovo Ayyaswamy,

University of Pennsylvania,

Philadelphia, PA, United States

10-64 HEAT TRANSFER AND THERMAL

ENGINEERING PLENARIES

10-64-2 Heat Transfer and Thermal Engineering

Plenary II

Third Floor, David L. Lawrence Convention Center, Room 306

9:00am–9:45am

9:00am – Aerospace Thermal Management: Challenges and

Opportunities

Plenary Presentation. IMECE2018-90103

Andrew Bicos,

Boeing Co., Huntington Beach, CA, United

States

10-7 K6-6 RADIATIVE HEAT TRANSFER

AND RADIATIVE PROPERTIES OF ENERGY

SYSTEMS

10-7-1 Analysis of RadiativeTransfer in Energy

Systems

Third Floor, David L. Lawrence Convention Center, Room 321

10:00am–11:45am

Session Chair: Matthew R. Jones,

Brigham Young University,

Provo, UT, United States

10:00am – Design and Evaluation of the Fresnel-Lens

Based Solar Concentrator System Through a Statistical-

Algorithmic Approach

Technical Paper Publication. IMECE2018-87023

Hassan Qandil, Weihuan Zhao,

University of North Texas,

Denton, TX, United States

10:21am – Non-Gray Radiation Exchange: The Internal

Fractional Function Reconsidered

Technical Paper Publication. IMECE2018-86386

John Lienhard V,

Massachusetts Institute of Technology,

Cambridge, MA, United States

10:42am – Radiation Characterization of Packed Beds

Using Artiﬁcial Neural Networks

Technical Presentation. IMECE2018-89013

Hynn Hee Kang, Shima Hajimirza,

College Station, TX, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

MONDAY, NOVEMBER  / TUESDAY, NOVEMBER 

131

11:03am – Orthogonal Function Extension to the Hottel

Zone Method

Technical Presentation. IMECE2018-88771

Daniel Wanegar, Ofodike Ezekoye,

University of Texas,

Austin, TX, United States

11:24am – Uncertainty in Optical Particulate Counters

Technical Presentation. IMECE2018-87781

Jared Blanchard, Jacob Thomas, Nicholas J. Wallace,

Connan Wu, Randy S. Lewis, Matthew R. Jones,

Brigham

Young University, Provo, UT, United States

10-15 K8-1 FUNDAMENTALS OF BOILING

AND CONDENSATION – I

10-15-1 Fundamentals of Boiling and Evaporation

Third Floor, David L. Lawrence Convention Center, Room 320

10:00am–11:45am

Session Chair: Vijay Dhir,

University of California, Los Angeles,

Los Angeles, CA, United States

Session Co-Chairs: Diana-Andra Borca-Tasciuc,

Rensselaer

Polytech Institute, Troy, NY, United States,

C. Thomas

Avedisian,

Cornell University, ithaca, NY, United States

10:00am – Mechanism Interaction During Droplet

Evaporation on Nanostructured Hydrophilic Surfaces

Technical Paper Publication. IMECE2018-87991

Van P. Carey,

University of California, Berkeley, CA, United

States,

Claire K. Wemp,

University of California, San Jose, CA,

United States,

Emma R. McClure, Samuel Cabrera,

University of California, Berkeley, CA, United States

10:21am – Nanoscale Wetting and Energy Transmission at

Solid-Liquid Interfaces

Technical Presentation. IMECE2018-89801

John A. Tomko, Ashutosh Giri, David Olson, John Gaskins,

University of Virginia, Charlottesville, VA, United States,

Sean

O’Malley,

Rutgers University, Camden, NJ, United States,

Patrick E. Hopkins,

University of Virginia, Charlottesville, VA,

United States

10:42am – Origin and Evolution of Microlayer in a Vapor

Bubble During Pool Boiling

Technical Presentation. IMECE2018-88965

An Zou, Manish Gupta, Shalabh Maroo,

Syracuse University,

Syracuse, NY, United States

11:03am – Simulation of Nucleate Boiling With Interfacial

Temperature Gradients and Sharp Interface

Technical Paper Publication. IMECE2018-87998

Satish Kandlikar, Isaac Perez-Raya,

Rochester Institute of

Technology, Rochester, NY, United States

11:24am – Role and Enhancement of Micro-Nucleation in

Annular Flow-Boiling

Technical Presentation. IMECE2018-86343

Amitabh Narain, Patcharapol Gorgitrattanagul,

Michigan

Technological University, Houghton, MI, United States,

Ritunesh Kumar,

Indian Institute of Technology, Indore, India,

Hrishikesh Ranga Prasad, Sunil Mehendale, Soroush

Sepahyar,

Michigan Technological University, Houghton, MI,

United States

10-23 K9-3 PHONONIC CRYSTALS AND

THERMOELECTRICS

10-23-1 K9-3 Phononic Crystals and

Thermoelectrics – I

Third Floor, David L. Lawrence Convention Center, Room 330

10:00am–11:45am

Session Chair: Yanliang Zhang,

University of Notre Dame,

Notre Dame, IN, United States

Session Co-Chair: Tianli Feng,

Vanderbilt University/Oak

Ridge National Laboratory, Oak Ridge, TN, United States

10:00am – Lattice Thermal Conductivity of Nanostructured

Thermoelectric Materials

Technical Presentation. IMECE2018-87177

Bo Fu, Guihua Tang,

Xi’an Jiaotong University, Xi’an, Shaanxi,

China

10:21am – Thermal and Thermoelectric Transport in

Additive Printed Nanostructured Flexible Thermoelectric

Films

Technical Presentation. IMECE2018-87729

Yanliang Zhang,

University of Notre Dame, Notre Dame, IN,

United States,

Tony Varghese,

Boise State University, Boise,

ID, United States,

Nick Kempf, Mortaza Saeidi-Javash,

University of Notre Dame, Notre Dame, IN, United States

10:42am – Interatomic Potential Development for Thermal

Conductivity Prediction Of Materials: The Complex Binary

Compound Sb

Technical Presentation. IMECE2018-88650

Prabudhya Roy Chowdhury,

Purdue University, West

Lafayette, IN, United States,

Tianli Feng,

Vanderbilt

University/Oak Ridge National Laboratory, Oak Ridge, TN,

United States,

Xiulin Ruan,

Purdue University, West Lafayette,

IN, United States

11:03am – Thermoelectric Transport in Bismuth Telluride

Nanoribbon With Surface Protection by Organic Molecule

Coating

Technical Presentation. IMECE2018-89557

Wei Wu, Michael Pettes,

University of Connecticut, Storrs, CT,

United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

TUESDAY, NOVEMBER 

132

11:24am – Thermal Conductivity in CdO Modulation-Doped

Single Lattice Films (MoDSiLFs)

Technical Presentation. IMECE2018-89890

Elizabeth Radue,

University of Virginia, Charlottesville, VA,

United States,

Evan L. Runnerstrom,

NCSU, Raleigh, NC,

United States,

Christina M. Rost,

University of Virginia,

Charlottesville, VA, United States,

Brian F. Donovan,

U.S.

Naval Academy, Annapolis, MD, United States,

Everett D.

Grimley, James M. LeBeau,

NCSU, Raleigh, NC, United

States,

Jon-Paul Maria,

Pennsylvania State University,

University Park, PA, United States,

Patrick Hopkins,

University

of Virginia, Charlottesville, VA, United States

10-33 K11-2 CMS- SPRAYS AND EMISSIONS

10-33-1 CMS—Sprays and Emissions

Third Floor, David L. Lawrence Convention Center, Room 326

10:00am–11:45am

Session Chair: Mohsen Ghamari,

Wilkes University, Wilkes-

Barre, PA, United States

Session Co-Chair: Mohsen Ayoobi,

Wayne State University,

Detroit, MI, United States

10:00am – Cubic Formula for Determination of the Drop

Size During Atomization of Liquid Jets in Co- and Cross-

Flow of Air

Technical Paper Publication. IMECE2018-86372

Taewoo Lee, Jung Eun Park,

Arizona State University, Tempe,

AZ, United States,

Ryoichi Kurose,

Kyoto University, Kyoto,

Japan

10:21am – Nitrogen-Bearing Emissions From Combustion

of Raw and Torreﬁed Corn Straw in a Fixed-Bed Reactor

Technical Paper Publication. IMECE2018-86612

Xiaohan Ren,

Shandong University, Jinan, Shandong, China,

Emad Rokni,

Northeastern University, Brookline, MA, United

States,

Yu Liu, Zheng Cui,

Shandong University, Jinan,

Shandong, China,

Yiannis Levendis,

Northeastern University,

Boston, MA, United States

10:42am – Inﬂuence of Injection Angle on Pollutant

Emissions and Combustion Temperature on a CFM56-3

Engine

Technical Paper Publication. IMECE2018-87353

Pedro C. Moreira,

Universidade da Beira Interior, Covilhã,

Portugal,

Francisco Brojo,

Universidade da Beira Interior,

Beira, Portugal

11:03am – Preliminary Development of a Measurement

Standard Using a Research Simplex Atomizer

Technical Paper Publication. IMECE2018-87940

Scott Leask, Alice Li, Vincent McDonell, Scott Samuelsen,

University of California, Irvine, CA, United States

11:24am – Thermal Conductivity of Colloidal Suspensions

of Jet Fuel and Carbon-Based Nanoparticles and Its Effect

on Evaporation Rate

Technical Paper Publication. IMECE2018-88618

Mohsen Ghamari, Ahmed Aboalhamayie,

Wilkes University,

Wilkes-Barre, PA, United States

10-36 K13-1 HEAT TRANSFER IN

MULTIPHASE SYSTEMS

10-36-1 K13-1 HeatTransfer in Multiphase Systems – I

Fourth Floor, David L. Lawrence Convention Center, Room 406

10:00am–11:45am

Session Chair: Abhijit Mukherjee,

California State University

Northridge, Northridge, CA, United States

10:00am – Experimental Investigation on Heat Transfer

Characteristics of Smooth Water Wall Tube of an Ultra-

Supercritical CFB Boiler

Technical Paper Publication. IMECE2018-86137

Wenyu Wang, Ziyu Liang, Li Wan, Dan Liu, Dong Yang,

Xi’an Jiaotong University, Xi’an, China

10:21am – A Correlation for Maximum Heat Transfer to

Cylinders and Spheres in Gas-Fluidized Beds

Technical Paper Publication. IMECE2018-86586

Mirza Mohammed Shah,

Engineering Research Associates,

Redding, CT, United States

10:42am – General Correlation for Heat Transfer During

Two-Component Gas-Liquid Flow in Horizontal Pipes

Technical Paper Publication. IMECE2018-86589

Mirza Mohammed Shah,

Engineering Research Associates,

Redding, CT, United States

11:03am – A Correlation for Heat Transfer to Two-

Component Gas-Liquid Flowing in Vertical Channels

Technical Paper Publication. IMECE2018-86590

Mirza Mohammed Shah,

Engineering Research Associates,

Redding, CT, United States

11:24am – CFD Analysis of Direct Contact Condensation

(DCC) of Subsonic Steam Jets in a Cross-Flow of Water

Using a Two-Fluid Model

Technical Paper Publication. IMECE2018-87382

Jayachandran K. N., Arnab Roy, Parthasarathi Ghosh,

Indian Institute of Technology Kharagpur, Kharagpur, West

Bengal, India

10-42 K16-1: HEAT TRANSFER IN

ELECTRONIC EQUIPMENT

10-42-2 K16-1: Heat Transfer in Electronic Equipment – II

Third Floor, David L. Lawrence Convention Center, Room 327

10:00am–11:45am

Session Chair: Seungbae Park,

Binghamton University,

Binghamton, NY, United States

Session Co-Chair: Hendrik PJ De Bock,

GE Global Research,

Schenectady, NY, United States

10:00am – Thermal Transport at Ga

/Metal Interfaces and

Bulk Ga2O

Polymorphs

Technical Presentation. IMECE2018-86459

Henry Aller, Xiaoxiao Yu, Andrew Gellman, Jonathan Malen,

Alan McGaughey,

Car

United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

TUESDAY, NOVEMBER 

133

10:21am – Thermal Analysis of a Subscale Flux Focusing

Magnetic Gearbox

Technical Paper Publication. IMECE2018-86876

Sina Modaresahmadi, Javad Khalesi, Josh Kadel, Wesley

Williams,

University of North Carolina at Charlotte, Charlotte,

NC, United States

10:42am – Validation and Evaluation of Turbulence Models

in Thermal Predictions of a Small Data Center Facility

Technical Paper Publication. IMECE2018-87479

Beichao Hu, Long Phan, Cheng-Xian Lin,

Florida

International University, Miami, FL, United States

11:03am – An Experimental Study on the Convective Heat

Transfer Behavior of Diamond Nanoﬂuids in Electronic

Cooling Applications

Technical Paper Publication. IMECE2018-87481

Farzin Mashali, Ethan Languri,

Tennessee Technological

University, Cookeville, TN, United States,

Jim Davidson, David

Kerns,

FemtoScience, Nashville, TN, United States,

Fahad

Alkhaldi,

Tennessee Technological University, Cookeville, TN,

United States

11:24am – Micron Variations of the Thermal Conductivity of

Copper-Tin Intermetallics

Technical Presentation. IMECE2018-88551

Matthias Daeumer, Scott Schiffres,

SUNY Binghamton,

Binghamton, NY, United States,

Charles L. Arvin,

IBM,

Hopewell Junction, NY, United States

10-7 K6-6 RADIATIVE HEAT TRANSFER

AND RADIATIVE PROPERTIES OF ENERGY

SYSTEMS

10-7-2 Radiative Properties

Third Floor, David L. Lawrence Convention Center, Room 321

1:45pm–3:30pm

Session Chair: Rydge Mulford,

Brigham Young University,

Provo, UT, United States

1:45pm – Directional Radiative Properties of Thin

Polytetraﬂuoroethylene (PTFE) Sheets on a Silver Film

Technical Presentation. IMECE2018-87882

Peiyan Yang, Zhuomin Zhang, Chuyang Chen,

Georgia

Institute of Technology, Atlanta, GA, United States

2:06pm – How to Make Silica Aerogel Transparent?

Technical Presentation. IMECE2018-88885

Tiphaine Galy,

University of California, Los Angeles, Los

Angeles, CA, United States,

Mu Du, Guihua Tang,

Xi’an

Jiaotong University, Xi’an, China,

Laurent Pilon,

University of

California, Los Angeles, Los Angeles, CA, United States

2:27pm – Selective Thermal Radiation From Nanoribbons

Technical Presentation. IMECE2018-89679

Mahmoud Elzouka, Ravi Prasher,

Lawrence Berkeley

National Laboratory, Berkeley, CA, United States

2:48pm – Measurement of the Radiative Surface Properties

of Opaque Materials

Technical Presentation. IMECE2018-87771

Christopher Brooks, Matthew R. Jones,

Brigham Young

University, Provo, UT, United States

10-15 K8-1 FUNDAMENTALS OF BOILING

AND CONDENSATION ? I

10-15-2 K8-1 Fundamentals of Boiling

Third Floor, David L. Lawrence Convention Center, Room 320

1:45pm–3:30pm

Session Chair: Amitabh Narain,

Michigan Tech University,

Houghton, MI, United States

Session Co-Chair: Isaac Perez-Raya,

Rochester Institute of

Technology, Rochester, NY, United States

1:45pm – A Novel Multiscale Wick Structure for Delayed

Critical Heat Flux in Microchannel Flow Boiling Process

Technical Presentation. IMECE2018-88292

Mojtaba Hosseinnia, Sajjad Bigham,

Michigan Technological

University, Houghton, MI, United States

2:06pm – Boiling Heat Transfer on a Two-Tier Copper

Structure of Nanowires and Microgrooves

Technical Presentation. IMECE2018-88825

Guanglei Chen, Calvin Hong Li,

Villanova University,

Villanova, PA, United States

2:27pm – Molecular Dynamics Simulation of Explosive

Boiling on Concave Nanostructured Surface

Technical Paper Publication. IMECE2018-86965

Pengfei Ji, Mengzhe He, Yiming Rong,

Southern University

of Science and Technology, Shenzhen, Guangdong, China,

Yuwen Zhang,

University of Missouri, Columbia, MO, United

States,

Yong Tang,

South China University of Technology,

Guangzhou, Guangdong, China

2:48pm – Investigation of Bubble Departure Radius in

Subcooled Pool Boiling Under Microgravity Condition

Technical Paper Publication. IMECE2018-87741

Xueli Wang,

Xi’an Jiaotong University, Xi’an, China,

Zan Wu,

Lund University, Lund, Sweden,

Jinjia Wei,

Xi’an Jiaotong

University, Xi’an, China,

Bengt Sunden,

Lund University, Lund,

Sweden

3:09pm – Multi-Fractal Analysis of Surface Temperature

Time Series to Predict the Critical Heat Flux

Technical Presentation. IMECE2018-89500

Ankit Saini, Vinod Srinivasan,

University of Minnesota,

Minneapolis, MN, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

TUESDAY, NOVEMBER 

134

10-23 K9-3 PHONONIC CRYSTALS AND

THERMOELECTRICS

10-23-2 K9-3 Phononic Crystals andThermoelectrics – II

Third Floor, David L. Lawrence Convention Center, Room 330

1:45pm–3:30pm

Session Chair: Tianli Feng,

Vanderbilt University/Oak Ridge

National Laboratory, Oak Ridge, TN, United States

Session Co-Chair: Ruiqiang Guo,

Caltech, Pasadena, CA,

United States

1:45pm – Anisotropic Thermal Transport in Single-Crystal

Group-III Nitride Films Extrinsically Induced by Highly-

Oriented Dislocations

Technical Presentation. IMECE2018-89505

Bo Sun,

National University of Singapore, Singapore,

Singapore,

Georg Haunschild,

Technical University of Munich,

Garching, Germany,

Carlos Polanco,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States,

James (Zi-Jian) Ju,

Technical University of Munich, Garching, Germany,

Lucas

Lindsay,

Oak Ridge National Laboratory, Oak Ridge, TN,

United States,

Gregor Koblmueller,

Technical University of

Munich, Garching, Germany,

Yee Kan Koh,

National University

of Singapore, Singapore, Singapore

2:06pm – Probing the Lower Limit of Lattice Thermal

Transport in One-Dimensional Phononic Crystals

Technical Presentation. IMECE2018-89708

Pranay Chakraborty, Lei Cao, Yan Wang,

University of

Nevada, Reno, Reno, NV, United States

2:27pm – Investigations of Encapsulated Phase Change

Material in Boron Nitride Nanotubes

Technical Presentation. IMECE2018-89778

Nastaran Barhemmati-Rajab, Weihuan Zhao,

University of

North Texas, Denton, TX, United States

2:48pm – Thermal Conductivity Measurement of

Methylammonium Lead Iodide Based Ruddlesden Popper

Perovskite Phases

Technical Presentation. IMECE2018-87814

Alexander D. Christodoulides,

Carnegie Mellon University,

Pittsburgh, PA, United States,

Peijun Guo,

Argonne National

Laboratory, Lemont, IL, United States,

Constantinos

Stoumpos, Mercouri G. Kanatzidis,

Northwestern University,

Evanston, IL, United States,

Richard Schaller,

Argonne

National Laboratory/Northwestern University, Lemont, IL,

United States,

Jonathan Malen,

Carnegie Melon University,

Pittsburgh, PA, United States

10-34 K11-3 CMS- APPLIED COMBUSTION

10-34-1 CMS—Applied Combustion: Modeling Heat

Transfer and Combustion

Third Floor, David L. Lawrence Convention Center, Room 326

1:45pm–3:30pm

Session Chair: Mehdi Esmaeilpour,

Marshall University,

Huntington, WV, United States

Session Co-Chair: Kris Jorgensen,

A. O. Smith, Brookeld,

WI, United States

1:45pm – Numerical Modeling of Water Impingement and

Heat Transfer With Solid Slabs During Secondary Cooling

in a Continuous Caster

Technical Paper Publication. IMECE2018-86691

Haibo Ma, Kaile Tang,

Purdue University Northwest CIVS,

Hammond, IN, United States,

Rui Liu, Michael Lowry,

ArcelorMittal, East Chicago, IN, United States,

Armin Silaen,

Purdue University Northwest CIVS, Hammond, IN, United

States,

Chenn Zhou,

Purdue University Calumet, Hammond,

IN, United States

2:06pm – Optimization of Heat Transfer Process in a

Walking Beam Reheat Furnace Using Computational Fluid

Dynamics

Technical Paper Publication. IMECE2018-88117

Yuchao Chen,

Purdue University Northwest, Hammond, IN,

United States,

Armin Silaen,

Purdue University Northwest

CIVS, Hammond, IN, United States,

Nicholas Walla,

Purdue

University Northwest, Hammond, IN, United States,

Kurt

Johnson,

ArcelorMittal Global Research and Development,

East Chicago, IN, United States,

Chenn Zhou,

Purdue

University Calumet, Hammond, IN, United States

2:27pm – CFD Modelling of NO

and Soot Formation in

Aluminum Anode Baking Furnace

Technical Paper Publication. IMECE2018-88390

Abdul Raouf Tajik,

Khalifa University of Science and

Technology, Masdar City, Abu Dhabi, United Arab Emir.,

Tariq

Shamim,

University of Michigan-Flint, Flint, MI, United States,

Ahmed Ghoniem,

Massachusetts Institute of Technology,

Cambridge, MA, United States,

Rashid K. Abu Al-Rub,

Khalifa

University of Science and Technology, Abu Dhabi, Abu Dhabi,

United Arab Emir.

2:48pm – Modeling for Mineral Redistribution of Coal

Blending During Pulverized Coal Combustion

Technical Paper Publication. IMECE2018-87834

Md. Saifujjaman,

Arkansas State University, Jonesboro, AR,

United States,

Kwangkook Jeong,

Arkansas State University,

State University, AR, United States,

Shinku Lee,

Doosan

Heavy Industries & Construction Co., Ltd., Gyeongnam, Korea

(Republic)

3:09pm – CFD Analysis of Premixed Combustion in a Two

Stroke Polygon Engine

Technical Presentation. IMECE2018-89361

Christian Mendez, Kevin Anderson,

Califor

University, Pomona, CA, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

TUESDAY, NOVEMBER 

135

10-36 K13-1 HEAT TRANSFER IN

MULTIPHASE SYSTEMS

10-36-2 K13-1 HeatTransfer in Multiphase Systems – II

Fourth Floor, David L. Lawrence Convention Center, Room 406

1:45pm–3:30pm

Session Chair: Scott Thompson,

Auburn University, Auburn,

AL, United States

1:45pm – Effect of Particle-Laden Flow on Heat Transfer

Technical Presentation. IMECE2018-88005

Sarah R. Masters, Michael Manahan, Jr.,

Pennsylvania State

University, State College, PA, United States

2:06pm – Functional Coating Durability

Technical Presentation. IMECE2018-88110

Muhammad Jahidul Hoque, Longnan Li, Nenad Miljkovic,

University of Illinois at Urbana-Champaign, Urbana, IL, United

States

2:27pm – Three-Dimensional Multiple-Relaxation-Time

Lattice Boltzmann Simulation of Vapor Condensation on

Subcooled Wall

Technical Paper Publication. IMECE2018-88490

Wandong Zhao,

Nanchang University, Nanchang, Jiangxi,

China,

Ben Xu,

University of Texas Rio Grande Valley,

Edinburg, TX, United States,

Ying Zhang,

Nanchang

University, Nanchang, Jiangxi, China

2:48pm – Temperature Proﬁle Across Liquid-Vapor

Interface With Phase Change: Results From Molecular

Dynamics Simulations

Technical Presentation. IMECE2018-89202

Arif Rokoni, Ying Sun,

Drexel University, Philadelphia, PA,

United States

3:09pm – Numerical Study of Bubble Dynamics During

Nucleate Pool Boiling of Nanoﬂuids

Technical Presentation. IMECE2018-89266

Abhijit Mukherjee, Goutham Kumar Reddy Burla,

California

State University Northridge, Northridge, CA, United States,

Yash Jawanjal,

Indian Institute of Technology Bombay,

Mumbai, Maharashtra, India

10-53 K20-3 APPLICATIONS OF

COMPUTATIONAL HEAT TRANSFER

10-53-1 Applications of Computational Heat

Transfer: Convection

Third Floor, David L. Lawrence Convention Center, Room 327

1:45pm–3:30pm

Session Chair: Samuel Subia,

Sandia National Laboratories,

Albuquerque, NM, United States

Session Co-Chair: Aaron Wemhoff,

Villanova University,

Villanova, PA, United States

1:45pm – Numerical Modeling for a Supercritical CO2-

Liquid Sodium Hybrid Compact Heat Exchanger

Technical Paper Publication. IMECE2018-86682

Sean Kissick, Hailei Wang,

Oregon State University, Corvallis,

OR, United States

2:06pm – Calibration of External Heat Transfer Coefﬁcients

During Cooling of a Partially-Filled Water Tank Using

Measured Temperature-Time Data

Technical Paper Publication. IMECE2018-86716

Vishal Ramesh, Sandip Mazumder,

Ohio State University,

Columbus, OH, United States,

Gurpreet Matharu, Dhaval

Vaishnav, Syed Ali, Don Lawrence, Jatin Desai, Mohsen

Ehteshami,

Ford Motor Company, Dearborn, MI, United States

2:27pm – Preliminary Heat Transfer Simulation Model of a

Novel Dynamic Thermal Ablation Probe

Technical Paper Publication. IMECE2018-86874

Joseph Nakao, Yen-Lin Han,

Seattle University, Seattle, WA,

United States

2:48pm – Analysis of Flow and Thermal Stress in a Blast

Furnace Blowpipe

Technical Paper Publication. IMECE2018-88468

Yuhan Cui, Justina Lee, Nicholas Walla,

Purdue University

Northwest, Hammond, IN, United States,

Armin Silaen,

Purdue University Northwest CIVS, Hammond, IN, United

States,

Dale Goodloe,

ArcelorMittal, East chicago, IN, United

States,

Chenn Zhou,

Purdue University Calumet, Hammond,

IN, United States

3:09pm – Numerical Heat Transfer Study of Combined

Water and Air Cooling in a High-Speed Electric Motor

Technical Presentation. IMECE2018-89401

Jun Lin, Kevin Anderson,

California State Polytech University,

Pomona, CA, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

TUESDAY, NOVEMBER 

136

10-6 K6-5 THERMAL MANAGEMENT OF

BATTERY SYSTEMS

10-6-2 Capacitors

Fourth Floor, David L. Lawrence Convention Center, Room 407

3:45pm–5:30pm

Session Chair: Leitao Chen,

Rice University, Houston, TX,

United States

3:45pm – Heat Generation Rate Measurements in Hybrid

Supercapacitors Devices

Technical Presentation. IMECE2018-88886

Obaidallah Munteshari, Jonathan Lau, Ampol

Likitchatchawankun, Bing-Ang Mei, Christopher Choi,

Bruce Dunn, Laurent Pilon,

University of California,

Los Angeles, Los Angeles, CA, United States

4:06pm – Heat Generation in All-Solid-State

Supercapacitors With Graphene Electrodes and Gel

Electrolytes

Technical Presentation. IMECE2018-88899

Ampol Likitchatchawankun,

University of California,

Los Angeles, Los Angeles, CA, United States,

Arpan Kundu,

Purdue University, West Lafayette, IN, United States,

Obaidallah Munteshari, Timothy Fisher, Laurent Pilon,

University of California, Los Angeles, Los Angeles, CA,

United States

4:27pm – Continuum Modeling of Heat Generation in

Porous Electrical Double-Layer Capacitors During

Galvanostatic Charge/Discharge

Technical Presentation. IMECE2018-88903

Arpan Kundu,

Purdue University, West Lafayette, IN, United

States,

Laurent Pilon, Timothy Fisher,

University of California,

Los Angeles, Los Angeles, CA, United States

10-10 K6-9 TWO PHASE TRANSPORT IN

ENERGY SYSTEMS AND NON-EQUILIBRIUM

AND DYNAMIC ENERGY SYSTEMS

10-10-1 K6-9 Two Phase Transport in Energy Systems

and Non-Equilibrium and Dynamic Energy Systems

Third Floor, David L. Lawrence Convention Center, Room 321

3:45pm–5:30pm

Session Chair: David Pratt,

USAF, WPAFB, OH, United States

3:45pm – Calculation of Evaporation From Fukushima NPP

Spent Fuel Pools

Technical Paper Publication. IMECE2018-86561

Mirza Mohammed Shah,

Engineering Research Associates,

Redding, CT, United States

4:06pm – An Inﬂuence of the Numerical Modeling of the

Transition Between the Stator and Rotor on the

Thermodynamic Condensation Loss in the Low-Pressure

Part of a Steam Turbine

Technical Paper Publication. IMECE2018-86571

Guk-chol Jun,

Czech Technical University in Prague, Prague,

Czech Republic,

Lukas Mrozek,

University of West Bohemia,

Pilsen, Czech Republic

4:27pm – Pool Boiling Heat Transfer of N-Pentane and

Acetone on Nanostructured Surfaces by Electrophoretic

Deposition

Technical Paper Publication. IMECE2018-87752

Zan Wu, Anh Duc Pham, Zhen Cao,

Lund University, Lund,

Sweden,

Cathrine Albèr, Peter Falkman, Tautgirdas Ruzgas,

Malmö University, Malmö, Sweden,

Bengt Sunden,

Lund

University, Lund, Sweden

4:48pm – Supply Air Temperature Prediction in an Air-

Handling Unit Using Artiﬁcial Neural Network

Technical Paper Publication. IMECE2018-88507

Nikita R. Sukthankar, Abhishek Uday Walekar, Dereje

Agonafer,

University of Texas at Arlington, Arlington, TX,

United States

5:09pm – Numerical Study on the Performance

Characteristics of Cylindrical Heat Pipes With Differing

Wick Type

Technical Paper Publication. IMECE2018-86607

Mahboobe Mahdavi, Saeed Tiari, Ajaysinh B. Solanki,

Vivek Pawar,

Gannon University, Erie, PA, United States

10-15 K8-1 FUNDAMENTALS OF BOILING

AND CONDENSATION – I

10-15-3 K8-1 Fundamentals of Boiling, Evaporation,

and Condensation

Third Floor, David L. Lawrence Convention Center, Room 320

3:45pm–5:30pm

Session Chair: Diana-Andra Borca-Tasciuc,

Rensselaer

Polytech Institute, Troy, NY, United States

Session Co-Chair: Navdeep Dhillon,

California State

University Long Beach, Long Beach, CA, United States

3:45pm – Electrowetting-Induced Rapid Coalescence and

Shedding of Droplets During Condensation of Moist Air

Technical Presentation. IMECE2018-88973

Enakshi Wikramanayake, Vaibhav Bahadur,

University of

Texas at Austin, Austin, TX, United States

4:06pm – Hierarchical Microporous Surfaces for Enhancing

Capillary Boiling Heat Transfer

Technical Presentation. IMECE2018-87270

Rongfu Wen, Shanshan Xu, Yung-Cheng Lee, Ronggui

Yang,

University of Colorado Boulder, Boulder, CO, United

States

4:27pm – Producing Syngas From Glycerol by Film Boiling

Technical Presentation. IMECE2018-87613

Pushan Sharma, C. Thomas Avedisian, Jordan D. Brunson,

Cornell University, Ithaca, NY, United States,

Wing Tsang,

National Institute of Standards and Technology, Gaithersburg,

MD, United States,

Ivan Keresztes,

Cornell University, Ithaca,

NY, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

TUESDAY, NOVEMBER 

137

4:48pm – Theoretical Model of Droplets Motions on Solid

Surface With Radial Wettable and Evaporation Rate

Gradients

Technical Paper Publication. IMECE2018-87890

Yanjie Yang, Zan Wu,

Lund University, Lund, Sweden,

Xiaoqian Chen,

National University of Defense Technology,

Changsha, China, China,

Bengt Sunden,

Lund University,

Lund, Sweden,

Yiyong Huang,

National University of Defense

Technology, Changsha, China

5:09pm – Molecular Simulation of Steady-state Evaporation

and Condensation in the Presence of a Non-Condensable

Gas

Technical Presentation. IMECE2018-86180

Zhi Liang,

California State University, Fresno, Clovis, CA,

United States,

Pawel Keblinski,

RPI, Troy, NY, United States

10-25 K9-5 MICRO/NANOSCALE PHASE

CHANGE HEAT TRANSFER

10-25-1 K9-5 Micro-/Nanoscale Phase Change Heat

Transfer – I

Third Floor, David L. Lawrence Convention Center, Room 330

3:45pm–5:30pm

Session Chair: Dong Liu,

University of Houston, Houston, TX,

United States

Session Co-Chair: Tengfei Luo,

University of Notre Dame,

Notre Dame, IN, United States

3:45pm – Fast Evaporation From Single Graphene

Nanopore

Technical Presentation. IMECE2018-89652

Siyang Xiao,

Boston University, Allston, MA, United States,

Chuanhua Duan,

Boston University, Boston, MA, United

States

4:06pm – Effects of Size, Shape and Porosity on

Evaporation From Nanopores

Technical Presentation. IMECE2018-89669

Haowen Chen, Chuanhua Duan,

Boston University, Boston,

MA, United States

4:27pm – Computational Study of Thermodynamics and

Transport of Water Conﬁned Between Graphene

Technical Presentation. IMECE2018-89864

Ujash Shah, Timothy Fisher,

University of California, Los

Angeles, Los Angeles, CA, United States

4:48pm – Molecular Dynamics Simulation of Thin-Film

Evaporation From Nanocoated Surfaces: An Investigation

of the Role of Surface Wettability Interfacial Thermal

Resistance on the Evaporate Rate

Technical Presentation. IMECE2018-90017

Binjian Ma,

Washington University in St. Louis, College

Station, TX, United States,

Li Shan,

Washington University

in St. Louis, St. Louis, MO, United States,

Baris Dogruoz,

Cisco Systems Inc., Santa Clara, CA, United States,

Damena Agonafer,

Washington University in St. Louis,

Saint Louis, MO, United States

5:09pm – Fundamental Mechanisms of Evaporation

Kinetics of Non-Spherical Microdroplets Conﬁned by

Asymmetric Micropillar Structures

Technical Presentation. IMECE2018-90018

Li Shan,

Washington University in St. Louis, St. Louis,

MO, United States,

Binjian Ma,

Washington University in

St. Louis, College Station, TX, United States,

Baris Dogruoz,

Cisco Systems Inc., Santa Clara, CA, United States,

Damena

Agonafer,

Washington University in St. Louis, Saint Louis,

MO, United States

10-34 K11-3 CMS- APPLIED COMBUSTION

10-34-2 CMS—Applied Combustion: Improving

System Performance

Third Floor, David L. Lawrence Convention Center, Room 326

3:45pm–5:30pm

Session Chair: Kris Jorgensen,

A. O. Smith, Brookeld, WI,

United States

Session Co-Chair: Mehdi Esmaeilpour,

Marshall University,

Huntington, WV, United States

3:45pm – Correlating Thermal Characteristics From Flow-

Reactor Experiments With Primary Reference Fuel

Technical Paper Publication. IMECE2018-88042

Jun-Chun Wong,

Super Micro Computer, Inc., San Jose, CA,

United States,

Lea Der Chen,

Texas A&M University - Corpus

Christi, Corpus Christi, TX, United States

4:06pm – Inﬂuence of Renewable Gas Addition to Natural

Gas on the Combustion Performance of Cooktop Burners

Technical Paper Publication. IMECE2018-87932

Yan Zhao, Shiny Choudhury, Vincent McDonell,

University of

California, Irvine, CA, United States

4:27pm – Preheat Limits in Practical Combustor Design:

Experiments and Simulations

Technical Paper Publication. IMECE2018-88111

Aleksandr Fridlyand, Brian Sutherland, Paul Glanville,

Gas

Technology Institute, Des Plaines, IL, United States

4:48pm – Water/Steam Injection for NOx Reduction in

Process Burners

Technical Paper Publication. IMECE2018-88688

Steve Londerville,

Coen, Hayward, CA, United States,

Kevin Anderson,

Coen, Sacramento, CO, United States,

Charles Baukal,

John Zink Co. LLC, Tulsa, OK, United States,

Wes Bussman,

John Zink Hamworthy Combustion, Tulsa, OK,

United States

5:09pm – Infrared Thermography to Measure Heat Transfer

of a Heated Curved Thin Sheet

Technical Paper Publication. IMECE2018-86172

Gaofeng Wang, Liang Zhong, Yifan Xia,

Zhejiang University,

Hangzhou, Zhejiang, China

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

TUESDAY, NOVEMBER 

138

10-39 K14-1 GAS TURBINE HEAT TRANSFER

AND COOLING

10-39-1 Gas Turbine Heat Transfer and Cooling

Fourth Floor, David L. Lawrence Convention Center, Room 405

3:45pm–5:30pm

Session Chair: Stephen Lynch,

Pennsylvania State University,

University Park, PA, United States

Session Co-Chair: Andrew Nix,

West Virginia University,

Morgantown, WV, United States

3:45pm – Effect of Nozzle-to-Target Spacing on Fin

Effectiveness and Convective Heat Transfer Coefﬁcient for

Array Jet Impingement Onto Novel Micro-Roughness

Structures

Technical Paper Publication. IMECE2018-86501

Prashant Singh,

North Carolina State University, Raleigh, NC,

United States,

Mingyang Zhang,

Virginia Tech, Blacksburg,

VA, United States,

Shoaib Ahmed, Srinath Ekkad,

North

Carolina State University, Raleigh, NC, United States

4:06pm – Simulation of Film Cooling Heat Transfer and

Simulation Improvement With a Modiﬁed DES Turbulence

Model

Technical Paper Publication. IMECE2018-86887

Feiyan Yu, Savas Yavuzkurt,

Pennsylvania State University,

University Park, PA, United States

4:27pm – Large Eddy Simulations of Discrete Film Cooling

With Different Freestream Turbulence Levels

Technical Presentation. IMECE2018-89763

Yousef Kanani, Sumanta Acharya,

Illinois Institute of

Technology, Chicago, IL, United States

4:48pm – Large-Eddy Simulations of Low Pressure Turbine

Endwall Flow and Heat Transfer

Technical Paper Publication. IMECE2018-87876

Stephen Lynch,

Pennsylvania State University, University Park,

PA, United States

5:09pm – A Novel Air-Air Heat Exchanger Design and

Experimental Validation for Aero-Engines

Technical Paper Publication. IMECE2018-87169

Yinlong Liu, Yanchen Fu, Haoran Huang, Jie Wen,

Guoqiang Xu,

Beihang University, Beijing, China

10-40 K15-1 TRANSPORT PHENOMENA IN

MANUFACTURING AND MATERIALS

PROCESSING

10-40-2 K15-1 Transport Phenomena in

Manufacturing and Materials Processing – II

Fourth Floor, David L. Lawrence Convention Center, Room 406

3:45pm–5:30pm

Session Chair: Patrick Mensah,

Southern University, Baton

Rouge, LA, United States

Session Co-Chair: Ying Sun,

Drexel University, Philadelphia,

PA, United States

3:45pm – Thermal Stress Associated With Non-Fourier Heat

Conduction in Femtosecond Laser Heating of Multilayer

Metallic Films

Technical Paper Publication. IMECE2018-86144

Swarup Bag,

IIT Guwahati, Guwahati, India,

M. Ruhul Amin,

Montana State University, Bozeman, MT, United States

4:06pm – A Study of Photo-Thermal-Fluids Transport

Phenomena With Marangoni Effect of Laser Micro-

Patterning Process

Technical Presentation. IMECE2018-88808

Ming-Tsang Lee,

National Tsing Hua University, Hsinchu,

Taiwan

4:27pm – An Experimental Setup for Multiple Air Jet

Impingement Over a Surface

Technical Paper Publication. IMECE2018-87995

Flávia Barbosa, Joao Silva, Pedro Ribeiro, Senhorinha

Teixeira, Delﬁm Soares,

University of Minho, Guimarães,

Portugal,

Duarte Santos,

Bosch Car Multimedia SA, Braga,

Portugal,

Maria Cerqueira,

Physics Department, Braga,

Portugal,

Jose Teixeira,

University of Minho, Guimarães,

Portugal

10-53 K20-3 APPLICATIONS OF

COMPUTATIONAL HEAT TRANSFER

10-53-2 Applications of Computational Heat

Transfer: Industrial Applications

Third Floor, David L. Lawrence Convention Center, Room 327

3:45pm–5:30pm

Session Chair: Samuel Subia,

Sandia National Laboratories,

Albuquerque, NM, United States

Session Co-Chair: Aaron Wemhoff,

Villanova University,

Villanova, PA, United States

3:45pm – Study on Cutting Temperature Modeling of

Machined Workpiece in End Milling In Situ TiB2/7050Al

MMCs

Technical Paper Publication. IMECE2018-87319

Yifeng Xiong, Wenhu Wang, Ruisong Jiang, Kunyang Lin,

Northwestern Polytechnical University, Xi’an, Shaanxi, China

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

TUESDAY, NOVEMBER 

139

4:06pm – Air Flow Velocity Field Validation and Turbulence

Studies on a Single Rack Model in Data Centers

Technical Paper Publication. IMECE2018-86575

Long Phan, Beichao Hu, Cheng-xian Lin,

Florida

International University, Miami, FL, United States

4:27pm – CFD Model of the Turboprop Engine Hot Part:

Bay Cooling

Technical Paper Publication. IMECE2018-87066

Goran Simeunovic, Petr Hatschbach, Lukas Popelka,

Czech Technical University in Prague, Prague, Czech Republic

4:48pm – Combined Computational and Experimental

Analysis of Cooldown of a Surrogate Engine Mount

Assembly

Technical Paper Publication. IMECE2018-87139

Navni N. Verma, Andrei Iacob, Sandip Mazumder, Ahmet

Selamet,

Ohio State University, Columbus, OH, United States

5:09pm – Dynamic Numerical Simulation of Heat Transfer

and Fluid Flow in Sustainable Farming Compartment

Technical Presentation. IMECE2018-89254

Jae Sung Park, Siamak Mirfendereski,

University of

Nebraska–Lincoln, Lincoln, NE, United States,

M. Sina

Mousavi, Jongwan Eun,

University of Nebraska–Lincoln,

Omaha, NE, United States

WEDNESDAY, NOVEMBER 14

10-16 K8-2 FUNDAMENTALS OF SINGLE

PHASE CONVECTION

10-16-1 K8-2 Fundamentals of Single Phase

Convection

Third Floor, David L. Lawrence Convention Center, Room 331

10:00am–11:45am

Session Chair: Patrick Oosthuizen,

Queen’s University,

Kingston, QC, Canada

Session Co-Chairs: Chris Kobus,

Oakland University,

Rochester, MI, United States,

Diana-Andra Borca-Tasciuc,

Rensselaer Polytech Institute, Troy, NY, United States

10:00am – Measurement of Heat Transfer Coefﬁcient in

Interaction Zone of Multiple Liquid Jet Impingement

Technical Presentation. IMECE2018-88888

Chaitanya Ghodake, Bharat Forge,

Pune, Maharshtra, India

10:21am – Utilizing the Integral Technique to Determine the

Similarity Variable in Classical Heat Transfer Problems:

Thermal Boundary Layer Theory

Technical Paper Publication. IMECE2018-88662

Chris Kobus,

Oakland University, Rochester, MI, United States

10:42am – Numerical Study on Apparent Permeability of

Porous Media in Slip Gas Flows Based on Lattice

Boltzmann Method

Technical Paper Publication. IMECE2018-87152

Zhenyu Liu, Zhiyu Mu, Huiying Wu,

Shanghai Jiao Tong

University, Shanghai, China

11:03am – Nonlinear Analysis of Convection in

Ferromagnetic Liquids: Effect of Rotation

Technical Paper Publication. IMECE2018-87367

Anthony Christy Melson, G.N. Sekhar,

BMS College of

Engineering, Bengaluru, Karnataka, India

11:24am – Experimental Investigation of Vapor

Compression Cycle Under Inﬂuence of

Magnetohydrodynamic Force

Technical Paper Publication. IMECE2018-88528

Nikhil Shrikant Mane,

PVPIT, Budhgaon, Sangli, Maharashtra,

India,

Narayanrao Hargude,

RIT Sakharale, Budhgaon

Maharashtra, India,

Nutan Hargude,

Adarsh Collge, Vita,

Sangli, Maharashtra, India

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

TUESDAY, NOVEMBER  / WEDNESDAY, NOVEMBER 

140

10-25 K9-5 MICRO/NANOSCALE PHASE

CHANGE HEAT TRANSFER

10-25-2 K9-5 Micro-/Nanoscale Phase Change Heat

Transfer – II

Third Floor, David L. Lawrence Convention Center, Room 320

10:00am–11:45am

Session Chair: Chuanhua Duan,

Boston University, Boston,

MA, United States

Session Co-Chair: Dong Liu,

University of Houston, Houston,

TX, United States

10:00am – Local Measurement of the Evaporative Heat

Transfer Coefﬁcient in Thin Films Using Frequency Domain

Thermoreﬂectance

Technical Presentation. IMECE2018-86605

Xiaoman Wang, Xiaoyue Zhao, Alan McGaughey, Jonathan

Malen,

Carnegie Mellon University, Pittsburgh, PA, United

States

10:21am – Interfacial Defrosting

Technical Presentation. IMECE2018-86939

Shreyas Chavan, Kazi Fazle Rabbi, Thomas Foulkes,

Kalyan Boyina, Robert Pilawa-Podgurski, Nenad Miljkovic,

University of Illinois at Urbana-Champaign, Urbana, IL, United

States

10:42am – Hybrid Surface Derived From PDMS Stamping

Technical Presentation. IMECE2018-88106

Muhammad Jahidul Hoque, Seok Kim, Nenad Miljkovic,

University of Illinois at Urbana-Champaign, Urbana, IL, United

States

11:03am – Thermal Transport Crossover From Crystalline

to Partial-Crystalline Partial-Liquid State

Technical Presentation. IMECE2018-88862

Yanguang Zhou,

University of California, Los Angeles, Los

Angeles, CA, United States,

Shiyun Xiong,

Soochow

University, China, Soochow, China,

Xiaoliang Zhang,

Dalian

University of Technology, China, Dalian, China,

Sebastian Volz,

University of Tokyo, Japan, Chatenay, France,

Ming Hu,

University of South Carolina, Columbia, DC, United States

11:24am – Contact Line and Microlayer Movement in a

Vapor Bubble During Pool Boiling

Technical Presentation. IMECE2018-88966

An Zou, Shalabh Maroo,

Syracuse University, Syracuse, NY,

United States

10-36 K13-1 HEAT TRANSFER IN

MULTIPHASE SYSTEMS

10-36-3 K13-1 HeatTransfer in Multiphase Systems – III

Third Floor, David L. Lawrence Convention Center, Room 330

10:00am–11:45am

Session Chair: Vinod Srinivasan,

UMN, Minneapolis, MN,

United States

10:00am – Transient Ash Deposition Modeling in Full-scale

Low Temperature Heat Exchangers for Pulverized Coal-

ﬁred Power Plant Applications

Technical Presentation. IMECE2018-89694

Sandeep Aryal, Kwangkook Jeong,

Arkansas State

University, State University, AR, United States,

Shinku Lee,

Eungchul Lee,

Doosan Heavy Industries & Construction Co.

Ltd., Gyeongnam, Korea (Republic)

10:21am – Analytical Modeling on Multiphase Heat and

Mass Transfer in Full-Scale Gas-to-Gas Cooler for

Pulverized Coal-Fired Power Plant Applications

Technical Presentation. IMECE2018-89698

Santosh Tamang,

Arkansas State University, Jonesboro, AR,

United States,

Kwangkook Jeong,

Arkansas State University,

State University, AR, United States,

Shinku Lee, Eungchul

Lee,

Doosan Heavy Industries & Construction Co. Ltd.,

Gyeongnam, Korea (Republic)

10:42am – Thermal Performance of Slurry Flow With

Microencapsulated Phase Change Material in Circular Tube

Technical Presentation. IMECE2018-89940

Weiwei Zhu, Hamidreza Shabgard,

University of Oklahoma,

Norman, OK, United States

11:03am – Substrate Thermal Conductivity Controls the

Ability to Manufacture Microstructures via Laser-Induced

Direct Write

Technical Presentation. IMECE2018-89797

John A. Tomko, David Olson, Jeffrey Braun, Andrew

Kelliher,

University of Virginia, Charlottesville, VA, United

States,

Bryan Kaehr,

Sandia National Laboratories,

Albuquerque, NM, United States,

Patrick E. Hopkins,

University of Virginia, Charlottesville, VA, United States

11:24am – Integrated Wick System in Evaporatively-Cooled

Heat Sink for Thermal Management of Thermoelectric

Generators

Technical Paper Publication. IMECE2018-86904

Michael Ozeh,

Purdue University Northwest, Hammond, IN,

United States,

A. G. Agwu Nnanna,

University of Texas of the

Permian Basin, Odessa, TX, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

WEDNESDAY, NOVEMBER 

141

10-44 K18-1 THERMAL TRANSPORT UNDER

HIGH TEMPERATURE AND/OR PRESSURE

CONDITIONS

10-44-1 Thermal Transport Under Microscale and

Rotating Features

Third Floor, David L. Lawrence Convention Center, Room 333

10:00am–11:45am

Session Chair: Qiuwang Wang,

Xi’an Jiaotong University,

Xi’an, Shaanxi, China

10:00am – Experimental Investigation on Flow Field in a

Rotating Channel With a New TR-PIV System

Technical Paper Publication. IMECE2018-86976

Shengjun Zhou, Haiwang Li, Zhi Tao, Ruquan You,

Haoyu Duan,

Beihang University, Beijing, China

10:21am – Computational Investigation of the Effects of

Pseudo-Boiling on Microscale Supercritical CO

Heat

Transfer

Technical Presentation. IMECE2018-87140

Mahdi Nabil, Alexander Rattner,

Pennsylvania State

University, University Park, PA, United States

10:42am – Experimental Investigation on Boundary Layer

Flow Under the Effect of Temperature Gradient in a Smooth

Rotating Channel Using Hot-Wire

Technical Paper Publication. IMECE2018-87183

Gangfu

Li, Zhi Tao, Huijie Wu, Ruquan You, Haiwang Li,

Beihang University, Beijing, China

11:03am – Numerical Study on Inﬂuencing Factors of Film

Cooling on Turbine Blade Leading Edge Under Rotating

State

Technical Paper Publication. IMECE2018-87258

Yiwen Ma, Haiwang Li, Meisong Yang, Min Wu, Huimin

Zhou,

Beihang University, Beijing, Beijing, China

11:24am – Rotating Film Cooling Performance of the Hole

Near the Leading Edge on the Suction Side of the Turbine

Blade

Technical Paper Publication. IMECE2018-86929

Zhiyu Zhou, Haiwang Li, Haichao Wang, Guoqin Zhao,

Feng Han, Min Wu,

Beihang University, Beijing, Beijing, China

10-17 K8-3 FUNDAMENTALS OF

MULTI-SCALE MODELING

10-17-1 Fundamentals of Multi-Scale Modeling

Third Floor, David L. Lawrence Convention Center, Room 331

1:45pm–3:30pm

Session Chair: Nicholas Roberts,

Utah State University,

Logan, UT, United States

Session Co-Chair: Alan McGaughey,

Carnegie Mellon

University, Pittsburgh, PA, United States

1:45pm – Long-Wave Homogenization of Porous Media

Electromagnetic Heat Exchangers

Technical Presentation. IMECE2018-87408

Joseph Gaone, Burt Tilley, Vadim Yakovlev,

Worcester

Polytechnic Institute, Worcester, MA, United States

2:06pm – From Discrete Ordinate Method to Interpolation

Supplemented Lattice Boltzmann Modeling of in-Plane

Phonon Transport

Technical Paper Publication. IMECE2018-87590

Dongyang Zhao, Yangyu Guo,

Tsinghua University, Beijing,

Beijing, China

2:27pm – Stochastic Homogenization of Randomly

Perturbed, Multiscale Periodic Heat Conduction Problems

Technical Presentation. IMECE2018-89762

Kelechi Ogbuanu, R. Valery Roy,

University of Delaware,

Newark, DE, United States

2:48pm – Multiscale Investigation of Thickness Dependent

Melting Thresholds of Nickel Film Under Femtosecond

Laser Heating

Technical Paper Publication. IMECE2018-86947

Pengfei Ji, Mengzhe He, Yiming Rong,

Southern University

of Science and Technology, Shenzhen, Guangdong, China,

Yuwen Zhang,

University of Missouri, Columbia, MO, United

States,

Yong Tang,

South China University of Technology,

Guangzhou, Guangdong, China

3:09pm – A Combined GCMC and FVM Simulation Method

for CO

Adsorption in 13X Zeolite Adsorption Bed

Technical Paper Publication. IMECE2018-87009

Hui Wang, Jun-Qiang Bai,

Northwestern Polytechnical

University, Xi’an, China,

Zhiguo Qu,

Xi’an Jiaotong University,

Xi’an, Shaanxi, China,

Yu Wang,

Northwestern Polytechnical

University, Xi’an, China,

Yang Zhang,

Xi’an Jiaotong University,

Xi’an, China

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

WEDNESDAY, NOVEMBER 

142

10-21 K9-1 THERMAL TRANSPORT ACROSS

HARD/SOFT INTERFACES

10-21-3 K9-1 Thermal Transport Across Hard/Soft

Interfaces – III

Third Floor, David L. Lawrence Convention Center, Room 330

1:45pm–3:30pm

Session Chair: Yee Kan Koh,

National University of Singapore,

Singapore, Singapore

Session Co-Chair: Anil Yuksel,

IBM Corporation, Austin, TX,

United States

1:45pm – Fundamental Study of Multiple Slopes Exhibited

by Measured Thermal Contact Conductance (TCC) Versus

Load Data for Metal-Metal Contacts

Technical Paper Publication. IMECE2018-86722

Navni N. Verma, Sandip Mazumder,

Ohio State University,

Columbus, OH, United States

2:06pm – Transient Heat and Mass Transfer During Gas

Adsorption Into Metal-Organic Frameworks

Technical Presentation. IMECE2018-88057

Hasan Babaei,

University of Pittsburgh, Carnegie Mellon

University, Pittsburgh, PA, United States,

Christopher E.

wilmer,

University of Pittsburgh, Pittsburgh, PA, United States

2:27pm – Heat Transfer Modeling of Nanoparticle Packings

on a Substrate

Technical Paper Publication. IMECE2018-88642

Anil Yuksel,

IBM Corporation, Austin, TX, United States,

Edward Yu, Michael Cullinan,

University of Texas at Austin,

Austin, TX, United States,

Jayathi Murthy,

University of

California, Los Angeles, Los Angeles, CA, United States

2:48pm – Monitoring Heat Transport Across Organic-

Inorganic Heterojunctions With Atomic Spatial Resolution

Technical Presentation. IMECE2018-89393

Yuexiang Yan, Yee Kan Koh,

National University of Singapore,

Singapore, Singapore

10-26 K9-6 NANOSCALE RADIATION HEAT

TRANSFER

10-26-1 Measurement of Near-Field Thermal

Radiation

Third Floor, David L. Lawrence Convention Center, Room 320

1:45pm–3:30pm

Session Chair: Liping Wang,

Arizona State University, Tempe,

AZ, United States

Session Co-Chair: Bo Zhao,

Stanford University, Stanford, CA,

United States

1:45pm – Near-Field Based Energy Transfer and Conversion

in Nanoscale Gaps

Invited Presentation. IMECE2018-89363

Pramod Sangi Reddy,

University of Michigan, Ann Arbor, MI,

United States

2:27pm – Experimental Measurement of the Spectrum of

Near-Field Thermal Emission

Technical Presentation. IMECE2018-88834

Saman Zare, Carl Tripp, Sheila Edalatpour,

University of

Maine, Orono, ME, United States

2:48pm – Conversion of Heat to Electricity Using a Nano

Gap Near-Field Thermophotovoltaic Device

Technical Presentation. IMECE2018-89352

Linxiao Zhu, Anthony Fiorino, Dakotah Thompson, Rohith

Mittapally, Pramod Sangi Reddy, Edgar Meyhofer,

University

of Michigan, Ann Arbor, MI, United States

3:09pm – Near-Field Radiative Thermal Regulation With

Electrically Tunable Monolayer Graphene

Technical Presentation. IMECE2018-89213

Xiaoyan Ying, Liping Wang,

Arizona State University, Tempe,

AZ, United States

10-29 K9-9 NANOSCALE HEAT TRANSPORT

IN PRACTICAL SYSTEMS

10-29-7 Micro-/Nanoelectronics and Related Issues

Third Floor, David L. Lawrence Convention Center, Room 333

1:45pm–3:30pm

Session Chair: Sanjiv Sinha,

University of Illinois at Urbana-

Champaign, Urbana, IL, United States

Session Co-Chair: Yanbao Ma,

University of California,

Merced, Merced, CA, United States

1:45pm – Phonon Transport Properties of Pristine and

Defective Beta-Ga

Invited Presentation. IMECE2018-89447

Zhequan Yan, Satish Kumar,

Georgia Institute of Technology,

Atlanta, GA, United States

2:27pm – 3D Anisotropic Thermal Conductivity Tensor of

Beta-Ga

Measured Using an Elliptical-Beam TDTR

Approach

Technical Presentation. IMECE2018-87569

Puqing Jiang, Xin Qian, Ronggui Yang,

University of

Colorado Boulder, Boulder, CO, United States

2:48pm – Ultra-Compliant Heterogeneous Copper-Tin

Nanowire Arrays Making a Super-Solder

Technical Presentation. IMECE2018-89168

Wei Gong, Pengfei Li, Yunheng Zhang,

Carnegie Mellon

University, Pittsburgh, PA, United States,

Xuhui Feng,

National

Renewable Energy Laboratory, Golden, CO, United States,

Joshua Major, Douglas DeVoto, Paul Paret, Charles King,

Sreekant Narumanchi,

National Renewable Energy

Laboratory, Golden, CO, United States,

Sheng Shen,

Carnegie

Mellon University, Pittsburgh, PA, United States

3:09pm – Multi-Length Scale Electrothermal Simulations of

GaN-Based Field Effect Transistors

Technical Presentation. IMECE2018-88133

Qing Hao, Hongbo Zhao, Yue Xiao,

University of Arizona,

Tucson, AZ, United Stat

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

WEDNESDAY, NOVEMBER 

143

10-11 K6-10 PANEL ON THE KEY ROLE OF

HEAT TRANSFER ANALYSIS IN ENERGY

SYSTEMS RESEARCH

10-11-1 K6-10 Panel on the Key Role of Heat Transfer

Analysis and Methodology in Research

Third Floor, David L. Lawrence Convention Center, Room 330

3:45pm–5:30pm

Session Chair: Nesrin Ozalp,

University of Minnesota Duluth,

Duluth, MN, United States

3:45pm – The Key Role of Heat Transfer Analysis in Energy

Systems Research

Panel Presentation. IMECE2018-89073

Patrick Oosthuizen,

Queen’s University, Kingston, QC,

Canada

4:06pm – Panel on the Key Role of Heat Transfer Analysis in

Energy Systems Research

Panel Presentation. IMECE2018-90046

Debjyoti Banerjee,

Texas A&M University, College Station, TX,

United States

4:27pm – Panel on the Key Role of Heat Transfer Analysis in

Energy Systems Research

Panel Presentation. IMECE2018-90047

Yaroslav Chudnovsky,

Gas Technology Institute, Des Plaines,

IL, United States

4:48pm – Panel on the Key Role of Heat Transfer Analysis in

Energy Systems Research

Panel Presentation. IMECE2018-90048

Kashif Nawaz,

Oak Ridge National Laboratory, Oak Ridge, TN,

United States

10-18 K8-4 FUNDAMENTALS OF

LIQUID/SOLID PHASE CHANGE

(ICIN

G/DEICING, SOLIDIFICATION)

10-18-1 K8-4 Fundamentals of Liquid/Solid Phase

Change (Icing/Deicing, Solidication)

Third Floor, David L. Lawrence Convention Center, Room 331

3:45pm–5:30pm

Session Chair: Enakshi Wikramanayake,

University of Texas at

Austin, Austin, TX, United States

Session Co-Chair: Shalabh Maroo,

Syracuse University,

Syracuse, NY, United States

3:45pm – Extreme Icephobicity of Passive Anti-Icing

Materials

Technical Presentation. IMECE2018-86360

Rukmava Chatterjee,

University of Illinois at Chicago,

Chicago, IL, United States,

Daniel Beysens,

ESPCI PMMH,

École Supérieure de Physique et de Chimie Industrielles, Paris,

France,

Sushant Anand,

University of Illinois at Chicago,

Chicago, IL, United States

4:06pm – Exploration of Variable Conductance Effects

During Input and Extraction of Heat From Phase Change

Thermal Storage

Technical Paper Publication. IMECE2018-88078

Zachary Theroff, Dre Helmns, Van P. Carey,

University of

California Berkeley, Berkeley, CA, United States’

4:27pm – Pore-Scale Modeling on Solidiﬁcation of Parafﬁn

With Volume Change in High Porosity Open-Cell Metal

Foam

Technical Presentation. IMECE2018-88875

Yuanpeng Yao, Huiying Wu,

Shanghai Jiao Tong University,

Shanghai, China

4:48pm – Molecular Dynamics Simulations of Droplet

Condensation on Nano-Structured Surfaces

Technical Presentation. IMECE2018-88981

Shalabh Maroo, Manish Gupta,

Syracuse University,

Syracuse, NY, United States,

M. Fernandino, C.A. Dorao,

Norwegian University of Science and Technology, Trondheim,

Norway

10-26 K9-6 NANOSCALE RADIATION HEAT

TRANSFER

10-26-2 Theoretical Prediction of Thermal Emission

and Energy Conversion

Third Floor, David L. Lawrence Convention Center, Room 320

3:45pm–5:30pm

Session Chair: Sheng Shen,

Carnegie Mellon University,

Pittsburgh, PA, United States

Session Co-Chair: Sheila Edalatpour,

University of Maine,

Orono, ME, United States

3:45pm – Near-Field Thermal Emission by Periodic Arrays

Technical Presentation. IMECE2018-86335

Sheila Edalatpour,

University of Maine, Orono, ME, United

States

4:06pm – Dipolar Radiative Thermal Conductivity in

Nanoparticle Arrays

Technical Presentation. IMECE2018-89069

Eric Tervo, Baratunde Cola, Zhuomin Zhang,

Georgia

Institute of Technology, Atlanta, GA, United States

4:27pm – Near-Field Thermophotonic Systems for Low-

Grade Waste Heat Recovery

Technical Presentation. IMECE2018-86723

Bo Zhao, Parthiban Santhanam, Kaifeng Chen, Siddharth

Buddhiraju, Shanhui Fan,

Stanford University, Stanford, CA,

United States

4:48pm – Quasi-Normal Mode Theory for Resonant Thermal

Infrared Emitters in Near- and Far-Fields

Technical Presentation. IMECE2018-89227

Jiayu Li, Sheng Shen, Liu Baoan,

Carnegie Mellon University

Pittsburgh, PA, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

WEDNESDAY, NOVEMBER 

144

5:09pm – Directional and Narrow-Band Thermal Emission

From Nanoantennas

Technical Presentation. IMECE2018-89391

Bowen Yu, Jiayu Li, Sheng Shen,

Carnegie Mellon University,

Pittsburgh, PA, United States

10-44 K18-1 THERMAL TRANSPORT UNDER

HIGH TEMPERATURE AND/OR PRESSURE

CONDITIONS

10-44-2 Thermal Transport Understanding and Its

Applications

Third Floor, David L. Lawrence Convention Center, Room 333

3:45pm–5:30pm

Session Chair: Qiuwang Wang,

Xi’an Jiaotong University,

Xi’an, Shaanxi, China

3:45pm – Tunable Thermal Transport and Reversible

Thermal Conductivity Switching in Topologically Networked

Bio-Inspired Materials

Technical Presentation. IMECE2018-89793

John A. Tomko,

University of Virginia, Charlottesville, VA,

United States,

Abdon Pena-Francesch, Huihun Jung,

Pennsylvania State University, State College, PA, United

States,

Madhusudan Tyagi,

National Institute of Standards,

Gaithersburg, MD, United States,

Benjamin Allen,

Pennsylvania State University, State College, PA, United

States,

Melik Demirel,

Pennsylvania State University,

University Park, PA, United States,

Patrick E. Hopkins,

University of Virginia, Charlottesville, VA, United States

4:06pm – Lattice Thermal Transport in Superhard

Hexagonal Diamond and Wurtzite Boron Nitride Under

High Temperature and/or High Pressure

Technical Presentation. IMECE2018-89714

Pranay Chakraborty, Guoping Xiong, Lei Cao, Yan Wang,

University of Nevada, Reno, Reno, NV, United States

4:27pm – Numerical Simulation With LB Method for

Propane Combustion Within Catalytic Micro-Porous

Media Combustor

Technical Paper Publication. IMECE2018-86754

X.B. Feng, Zhiguo Qu,

Xi’an Jiaotong University, Xi’an,

Shaanxi, China

4:48pm – Fruit Ripeness Estimation for Avocado Using

Thermal Imaging

Technical Paper Publication. IMECE2018-86290

Sathish Kumar Gurupatham, Nick Jacob, Kevin Van Der

Horn, Fahad Fahad, Erhan Ilksoy,

Kennesaw State Univeristy,

Marietta, GA, United States

5:09pm – Incubation Phenomenon Induced by Multiple

Femtosecond Laser Pulses Burst From a Single Pulse to

Process Aluminum

Technical Paper Publication. IMECE2018-86960

Pengfei Ji, Mengzhe He, Yiming Rong,

Southern University

of Science and Technology, Shenzhen, Guangdong, China,

Yuwen Zhang,

University of Missouri, Columbia, MO, United

States,

Yong Tang,

South China University of Technology,

Guangzhou, Guangdong, China

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

WEDNESDAY, NOVEMBER 

145

THURSDAY, NOVEMBER 15

10-29 K9-9 NANOSCALE HEAT TRANSPORT

IN PRACTICAL SYSTEMS

10-29-5 Thermal Engineering With Plasmonic

Materials

Fourth Floor, David L. Lawrence Convention Center, Room 405

8:00am–8:45am

Session Chair: Sanjiv Sinha,

University of Illinois at Urbana-

Champaign, Urbana, IL, United States

Session Co-Chairs: Edward Kinzel,

Missouri University of

Science and Technology, Rolla, MO, United States,

Yu-bin

Chen,

National Tsing Hua University, Hsinchu, Taiwan

8:00am – Ultrathin Liquid Film Thickness Measurement

Using Surface Plasmon Resonance Imaging

Technical Presentation. IMECE2018-89269

Iltai (Isaac) Kim,

Texas A&M University-Corpus Christi, Corpus

Christi, TX, United States

8:21am – Surface Plasmon Effects on the Interfacial Heat

Transport Processes in Gold Nanorods

Technical Presentation. IMECE2018-89712

Andrew Kelliher, John A. Tomko,

University of Virginia,

Charlottesville, VA, United States,

Brian B. Lynch, Joseph B.

Tracy,

North Carolina State University, Raleigh, NC, United

States,

Patrick Hopkins,

University of Virginia, Charlottesville,

VA, United States

8:42am – Optimization of External Quantum Efﬁciency of

Thin Film Solar Cells Using Surrogate Modeling of

Absorptivity

Technical Presentation. IMECE2018-89012

Mine Kaya, Shima Hajimirza,

Texas A&M University, College

Station, TX, United States

10-13 K7-1 MEASUREMENTS OF

THERMOPHYSICAL PROPERTIES

10-13-1 Measurements of Thermophysical Properties

Third Floor, David L. Lawrence Convention Center, Room 326

8:55am–10:40am

Session Chair: Nicholas Roberts,

Utah State University,

Logan, UT, United States

8:55am – Picosecond Transient Thermoreﬂectance

Technique for Measuring Thermal Conductivity in Thin

Films

Technical Presentation. IMECE2018-87712

Jihoon Jeong, Xianghai Meng, Jung-Fu Lin, Yaguo Wang,

University of Texas at Austin, Austin, TX, United States

9:16am – The Thermal Properties of Pristine and Loaded

Metal Organic Framework Thin Films Under Different

Environmental Conditions

Technical Presentation. IMECE2018-89240

Mallory E. DeCoster,

University of Virginia, Charlottesville, VA,

United States,

Hasan Babaei, University of Pittsburgh,

Carnegie

Mellon University, Pittsburgh, PA, United States,

Minyoung Jeong,

Carnegie Mellon University, Pittsuburg, PA,

United States,

Zeinab Hassan,

Karlsruhe Institute of

Technology, Baden-Wurttemberg, Baden-Wurttemberg,

Germany,

Timur Islamoglu,

Northwestern University,

Evanston, IL, United States,

Christopher E. Wilmer,

University

of Pittsburgh, Pittsburgh, PA, United States,

Helmut

Baumgart,

Old Dominion University, Newport News, VA,

United States,

Jonathan Malen,

Carnegie Melon University,

Pittsburgh, PA, United States,

Engelbert Redel,

Karlsruhe

Institute of Technology, Baden-Wurttemberg, Baden-

Wurttemberg, Germany,

Patrick Hopkins,

University of

Virginia, Charlottesville, VA, United States

9:37am – Thermal Transport in Electrospun Vinyl Polymer

Nanoﬁbers: Effects of Molecular Weight and Side Chain

Groups

Technical Presentation. IMECE2018-89769

Yin Zhang,

Southeast University, Nanjing, China,

Xin Zhang,

Lin Yang, Qian Zhang, Matthew Fitzgerald,

Vanderbilt

University, Nashville, TN, United States,

Akira Ueda,

Fisk

University, Nashville, TN, United States,

Yunfei Chen,

Southeast University, Nanjing, China,

Richard Mu,

Tennessee

State University, Nashville, TN, United States,

Deyu Li, Leon

Bellan,

Vanderbilt University, Nashville, TN, United States

9:58am – Microstructural and Thermal Characterization of

Diamond Nanoﬂuids

Technical Paper Publication. IMECE2018-87496

Farzin Mashali, Ethan Languri, Gholamreza Mirshekari,

Tennessee Technological University, Cookeville, TN, United

States,

Jim Davidson, David Kerns,

FemtoScience, Nashville,

TN, United States

10:19am – Evaluation of Heat Transfer Kinetics on Layers of

Air-Rich Soft Materials in Their Natural State

Technical Paper Publication. IMECE2018-87268

Hiroki Kaneko, Atsushi Sakuma,

Kyoto Institute of

Technology, Kyoto, Japan

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

THURSDAY, NOVEMBER 

146

10-26 K9-6 NANOSCALE RADIATION HEAT

TRANSFER

10-26-3 Radiative Properties and Radiative Transfer

in the Far Field

Third Floor, David L. Lawrence Convention Center, Room 324

8:55am–10:40am

Session Chair: Liping Wang,

Arizona State University, Tempe,

AZ, United States

Session Co-Chair: Zhen Chen,

Southeast University, Nanjing,

Jiangsu, China

8:55am – Simultaneously and Synergistically Harvest

Energy From the Sun and Outer Space

Technical Presentation. IMECE2018-86538

Zhen Chen,

Southeast University, Nanjing, Jiangsu, China,

Linxiao Zhu,

University of Michigan, Ann Arbor, Ann Arbor, MI,

United States,

Wei Li, Shanhui Fan,

Stanford University,

Stanford, CA, United States

9:16am – Scalable Metal-Free Paint for Passive Radiative

Cooling Under Direct Sunlight in Daytime and Nighttime

Technical Paper Publication. IMECE2018-88658

Xiangyu Li,

Purdue University, West Lafayette, IN, United

States,

Zhifeng Huang,

Wuhan University, Wuhan, China,

Joseph Peoples,

Purdue University, West Lafayette, IN, United

States,

Jun Qiu,

Harbin Institute of Technology, Harbin, China,

Xiulin Ruan,

Purdue University, West Lafayette, IN, United

States

9:37am – Hierarchical Approach of Nanoparticle Size

Selection for Enhancing Reﬂectance of the Solar Irradiation

Technical Presentation. IMECE2018-89973

Joseph Peoples, Xiangyu Li,

Purdue University, West

Lafayette, IN, United States,

Yaobing Lv, Jun Qiu,

Harbin

Institute of Technology, Harbin, China,

Zhifeng Huang,

Wuhan

University, Wuhan, China,

Xiulin Ruan,

Purdue University, West

Lafayette, IN, United States

9:58am – Thermochromic VO

-Based Variable Emittance

Coatings for Spacecraft Thermal Control

Technical Presentation. IMECE2018-89215

Sydney Taylor, Liping Wang,

Arizona State University, Tempe,

AZ, United States

10:19am – Hundred-Fold Enhancement in Far-Field

Radiative Heat Transfer Over the Blackbody Limit

Technical Presentation. IMECE2018-89312

Dakotah Thompson, Linxiao Zhu, Rohith Mittapally, Seid

Sadat,

University of Michigan, Ann Arbor, MI, United States,

Zhen Xing, Patrick McArdle, Mumtaz Qazilbash,

College of

William and Mary, Williamsburg, VA, United States,

Pramod

Sangi Reddy, Edgar Meyhofer,

University of Michigan, Ann

Arbor, MI, United States

10-29 K9-9 NANOSCALE HEAT TRANSPORT

IN PRACTICAL SYSTEMS

10-29-2 Heat Transfer Devices and Engineering

Third Floor, David L. Lawrence Convention Center, Room 325

8:55am–10:40am

Session Chair: Sanjiv Sinha,

University of Illinois at Urbana-

Champaign, Urbana, IL, United States

Session Co-Chair: Neil Zuckerman,

Seagate Technologies,

Bloomington, MN, United States

8:55am – Flow Characteristics of Nitrogen (N2) in Micro-

Channels of Printed Circuit Heat Exchanger (PCHE)

Technical Paper Publication. IMECE2018-86617

Jeong-Heon Shin, Seok Ho Yoon, Jun Seok Choi,

Korea

Institute of Mechinery & Materials, Daejeon, Korea (Republic)

9:16am – Enhanced Heat Convection in Nanochannels

Through Surface Engineering

Technical Presentation. IMECE2018-89827

Pranay Chakraborty, Tengfei Ma, Yan Wang,

University of

Nevada, Reno, Reno, NV, United States

9:37am – Simulation and Fabrication of Additively

Manufactured Heat Pipes

Technical Presentation. IMECE2018-89839

Daniel Hsieh, Oluseyi Babatola, Sanjiv Sinha,

University of

Illinois at Urbana-Champaign, Urbana, IL, United States

9:58am – Optimization of Heat Transfer Using Nano-Cutting

Fluids

Technical Presentation. IMECE2018-89618

Ali Hussain Kazim, Marriyam Shabbir, Faiza Mansoor,

Sumaira Gulfam,

University of Engineering and Technology,

Lahore, Lahore, Punjab, Pakistan

10:19am – Thermomechanical Design Optimization of Roll-

to-Roll Manufactured Hybrid Metal-Polymer Heat

Exchanger Pipes for Waste Heat Recovery

Technical Presentation. IMECE2018-89791

Manjunath Rajagopal, Yuquan Meng, Timothy Man,

Harikrishnan Kumar, Arpit Dwivedi, Dhruv Gelda, Chenhui

Shao, Sanjiv Sinha,

University of Illinois at Urbana-

Champaign, Urbana, IL, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

THURSDAY, NOVEMBER 

147

10-47 K18-4 THERMAL ANALYSIS OF

INDUSTRIAL EQUIPMENT AND SYSTEMS

OPERATING UNDER EXTREME PROCESS

CONDITIONS

10-47-1 Heat Transfer and Heat Exchange

Third Floor, David L. Lawrence Convention Center, Room 327

8:55am–10:40am

Session Chair: Qiuwang Wang,

Xi’an Jiaotong University,

Xi’an, Shaanxi, China

8:55am – Performance Analysis of Multi-Pass Cross-Flow

Heat Exchangers

Technical Paper Publication. IMECE2018-87049

Kiran Lankalapalli, Ahmed ElSawy, Stephen Idem,

Tennessee Technological University, Cookeville, TN, United

States

9:16am – The Cooling Process of Agricultural Products

After Boxing and Palletizing

Technical Paper Publication. IMECE2018-87788

Aklilu Giorges, John Pierson,

Georgia Institute of Technology,

Atlanta, GA, United States

9:37am – Turbulent Multi-Jet Air Impingement for

Applications in Commercial Cooking

Technical Paper Publication. IMECE2018-88635

Shantanu Shevade,

University of South Florida, Tampa, FL,

United States,

Muhammad Rahman,

Wichita State University,

Wichita, KS, United States,

Rasim Guldiken,

University of

South Florida, Tampa, FL, United States

9:58am – Heat Transfer Aspect of a Counter-Current Two

Phase Flow System for Harvesting Natural Gas From

Seaﬂoor Hydrates

Technical Presentation. IMECE2018-88853

Boyun Guo,

Univiversity of Louisiana, Lafayette, LA, United

States

10:19am – Experimental Comparison of 50 kW and 200 kW

Printed Circuit Heat Exchangers (PCHE)

Technical Presentation. IMECE2018-89521

Jeong-Heon Shin,

Korea Institute of Machinery and Materials,

Daejeon, Daejeon, Korea (Republic),

Joo Ha Ahn,

TankTech,

Busan, Korea (Republic),

Jungchul Kim, Sangho Sohn,

Seok

Ho Yoon, Korea Institute of Machinery and Materials, Daejeon,

Korea (Republic)

10-63 K10-4 MULTI-PHASE AND PASSIVE

ENHANCED HEAT TRANSFER

10-63-2 Multi-Phase and Passive Enhanced Heat

Transfer

Third Floor, David L. Lawrence Convention Center, Room 321

8:55am–10:40am

Session Chair: Amanie Abdelmessih,

California Baptist

University, Diamond Bar, CA, United States

Session Co-Chair: Ahmed Elatar,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States

8:55am – Enhanced Heat Transfer in Radial Heat Sinks for

LED Lamps

Technical Paper Publication. IMECE2018-87958

Fernando Cano-Banda,

University of Guanajuato, Irapuato

Guanajuato, Guanajuato, Mexico,

Ana Gallardo-Gutierrez,

Luis Luviano-Ortiz, Abel Hernandez-Guerrero,

University of

Guanajuato, Salamanca, Guanajuato, Guanajuato, Mexico,

Jesus Garcia-Gonzalez,

Grupo SSC, San Miguel de Allende,

Guanajuato, Mexico

9:16am – Inﬂuence of Pattern Geometry of Hybrid Surfaces

on Dropwise Condensation Heat Transfer and Droplet

Dynamics

Technical Paper Publication. IMECE2018-88571

Karim Egab,

University of Mazaya, Nassiriyah, Nassiriyah,

Iraq,

Saad Oudah, Mohammad Alwazzan, Jamil Khan, Chen

Li,

University of South Carolina, Columbia, SC, United States

9:37am – Effects of Surface Microstructure Parameters on

Spray Cooling Efﬁciency

Technical Presentation. IMECE2018-89510

Sankarganesh Muthukrishnan,

University of Minnesota Twin

Cities, Minneapolis, MN, United States,

Vinod Srinivasan,

UMN, Minneapolis, MN, United States

9:58am – Direct Numerical Simulation of Evaporating

Meniscus in Capillary Channel

Technical Presentation. IMECE2018-89931

Mohammad Naghashnejad, Hamidreza Shabgard,

University of Oklahoma, Norman, OK, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

THURSDAY, NOVEMBER 

148

10-14 K7-2 COMPUTATIONS OF

THERMOPHYSICAL PROPERTIES

10-14-1 Calculations of Thermophysical Properties 1

Third Floor, David L. Lawrence Convention Center, Room 326

10:50am–12:35pm

Session Chair: Nicholas Roberts,

Utah State University,

Logan, UT, United States

10:50am – The Effects of Neutron Irradiation Damage on

the Lattice Thermal Conductivity of Beta-Silicon Carbide

Technical Presentation. IMECE2018-87896

William Yorgason, Arden Barnes, Nicholas Roberts,

Utah

State University, Logan, UT, United States

11:11am – Effective Electronics Cooling Through

Microchannel Heat Sink (MCHS) Applications

Technical Presentation. IMECE2018-88802

Sonya Smith, Darryl Jennings, Jr.,

Howard University,

Washington, DC, United States

11:32am – A Reliable Approach to Calculation of

Thermophysical Properties of Liquid Using Molecular

Dynamics Simulations

Technical Presentation. IMECE2018-88837

Seyed Aliakbar Mirmohammadi,

University of Sydney,

Sydney, New South Wales, Australia

11:53am – Tunable Thermal Conductivity of Two-

Dimensional Polymers

Technical Presentation. IMECE2018-89117

Hao Ma, Erica O’Donnel, Zhiting Tian, V

irginia Tech,

Blacksburg, VA, United States

12:14pm – Evaluating the Accuracy of Neural Network

Potential for Thermal Transport Properties of Silicon

Technical Presentation. IMECE2018-89487

Hasan Babaei,

University of Pittsburgh, Carnegie Mellon

University, Pittsburgh, PA, United States,

Sangyeop Lee,

University of Pittsburgh, Pittsburgh, PA, United States

10-27 K9-7 ADVANCES IN METROLOGY

10-27-1 Thermal Metrology for Nanoscale Heat

Transfer

Third Floor, David L. Lawrence Convention Center, Room 324

10:50am–12:35pm

Session Chair: Yongjie Hu,

University of California, Los

Angeles, Los Angeles, CA, United States

Session Co-Chair: Sanjiv Sinha,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States

10:50am – Nanoscale Thermal Metrology Using Electrons

and Photons

Invited Presentation. IMECE2018-89876

Chris Dames,

UC Berkeley, Berkeley, CA, United States

11:32am – A Multi-Frequency 3 Omega Method for Tracking

Moving Phase Boundaries in Real Time

Technical Presentation. IMECE2018-89632

Wyatt Hodges, Chris Dames,

UC Berkeley, Berkeley, CA,

United States

11:53am – Reﬂection of Gigahertz Acoustic Phonons in

Silicon at a Nanowire-Bulk Interface

Technical Presentation. IMECE2018-89743

Dhruv Gelda,

University of Illinois at Urbana-Champaign,

Urbana, IL, United States,

Marc Ghossoub,

Intel, Hillsboro,

OR, United States,

Manjunath Rajagopal, Sanjiv Sinha,

University of Illinois at Urbana-Champaign, Urbana, IL, United

States

12:14pm – A New Experimental Metrology Based on

Asymmetric Time-Domain Thermoreﬂectance Method for

Anisotropic Thermal Conductivity Measurement

Technical Presentation. IMECE2018-86052

an Li, Joon Sang Kang, Yongjie Hu,

University of California,

Los Angeles, Los Angeles, CA, United States

10-29 K9-9 NANOSCALE HEAT TRANSPORT

IN PRACTICAL SYSTEMS

10-29-3 Transport at Interfaces

Third Floor, David L. Lawrence Convention Center, Room 323

10:50am–12:35pm

Session Chair: Sanjiv Sinha,

University of Illinois at Urbana-

Champaign, Urbana, IL, United States

Session Co-Chair: Yan Wang,

University of Nevada, Reno,

Reno, NV, United States

10:50am – Phonon-Mediated Thermal Transport at Bridged

Solid-Solid Interfaces

Technical Presentation. IMECE2018-88883

Rouzbeh Rastgar, Jingjie Zhang,

University of Virginia,

Charlottesville, VA, United States,

Carlos Polanco,

Oak Ridge

National Laboratory, Oak Ridge, TN, United States,

Nam Q. Le,

NRL, Washington, DC, United States,

Avik W. Ghosh, Pamela

M. Norris,

University of Virginia, Charlottesville, V

States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

THURSDAY, NOVEMBER 

149

11:11am – The Impact of Interdiffusion of Metal Adhesion

Layers on Thermal Interface Conductance

Technical Presentation. IMECE2018-86379

Dipanjan Saha, Xiaoxiao Yu, Minyoung Jeong, Mohamed

Darwish,

Carnegie Mellon University, Pittsburgh, PA, United

States,

Jeffrey Weldon,

University of Hawaii, Honolulu, HI,

United States,

Andrew Gellman, Jonathan Malen,

Carnegie

Mellon University, Pittsburgh, PA, United States

11:32am – Non-Equilibrium and Non-Diffusive Phonon

Transport Near Al/GaN Interface

Technical Presentation. IMECE2018-87185

Xin Qian,

University of Colorado Boulder, Boulder, CO, United

States,

Xiaokun Gu,

Shanghai Jiao Tong University, Shanghaii,

China,

Puqing Jiang, Ronggui Yang,

University of Colorado

Boulder, Boulder, CO, United States

11:53am – The Inﬂuence of Titanium Adhesion Layer

Oxygen Stoichiometry on Thermal Boundary Conductance

at Gold Contacts

Technical Presentation. IMECE2018-89135

vid Olson, Keren M. Freedy, Patrick Hopkins, Stephen J.

McDonnel,

University of Virginia, Charlottesville, VA, United

States

12:14pm – Spatial Mapping and Analysis of Thermal

Boundary Conductance of Metal–MoSe

Interfaces Using

Time-Domain Thermoreﬂectance

Technical Presentation. IMECE2018-89746

David B. Brown,

Georgia Institute of Technology, Atlanta, GA,

United States,

Xufan Li, Kai Xiao, David B. Geohegan,

Oak

Ridge National Laboratory, Oak Ridge, TN, United States,

Satish Kumar,

Georgia Institute of Technology, Atlanta, GA,

United States

10-29-4 Thermal Conductivity

Fourth Floor, David L. Lawrence Convention Center, Room 405

10:50am–12:14pm

Session Chair: Sanjiv Sinha,

University of Illinois at Urbana-

Champaign, Urbana, IL, United States

Session Co-Chair: Yee Kan Koh,

National University of

Singapore, Singapore, Singapore

10:50am – Effect of Loading the MOF HKUST-1 With Water,

Methanol and Ethanol on Its Thermal Conductivity

Invited Presentation. IMECE2018-88286

Hasan Babaei,

University of Pittsburgh, Carnegie Mellon

University, Pittsburgh, PA, United States,

Minyoung Jeong,

Jonathan Malen,

Carnegie Mellon University, Pittsburgh, PA,

United States,

Christopher E. Wilmer,

University of Pittsburgh,

Pittsburgh, PA, United States

11:32am – Thermal Conductivity of ALD Grown PbTe/PbSe

Superlattice Thin Films

Technical Presentation. IMECE2018-89249

Mallory E. DeCoster,

University of Virginia, Charlottesville, VA,

United States,

Xin Chen, Kai Zhang, Helmut Baumgart,

Old

Dominion University, Newport News, VA, United States,

Patrick Hopkins,

University of Virginia, Charlottesville, VA,

United States

11:53am – TX-100 Capped Iron Oxide Nanoparticle

Transformation and Implications for Induction Heating and

Hyperthermia Treatment

Technical Presentation. IMECE2018-87556

Hayden Carlton, David Huitink,

University of Arkansas,

Fayetteville, AR, United States

12:14pm – Thermal Conductivity of Poly (3,4-

ethylenedioxythiophene) Films Engineered by Oxidative

Chemical Vapor Deposition (oCVD)

Technical Presentation. IMECE2018-89324

Phil M. Smith, Laisuo Su, Wei Gong, Nathan Nakamura,

B. Reeja-Jayan, Sheng Shen,

Carnegie Mellon University,

Pittsburgh, PA, United States

10-30 K10-1 SINGLE-PHASE ENHANCED

HEAT TRANSFER – NUMERICAL STUDIES

10-30-2 Single-Phase Enhanced Heat Transfer:

Numerical Studies – I

Fourth Floor, David L. Lawrence Convention Center, Room 406

10:50am–12:35pm

Session Chair: Maulik Shelat,

Praxair, Williamsville, NY, United

States

Session Co-Chair: Ahmed Elatar,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States

10:50am – Heat Transfer Analyses of a 3D Graphene-

Carbon Nanotube Pillared Structure

Technical Paper Publication. IMECE2018-87029

Khaled Almahmoud, Weihuan Zhao,

University of North

Texas, Denton, TX, United States

11:11am – Shape Optimization of Microchannels Using

Surrogate Modelling

Technical Paper Publication. IMECE2018-87780

Muhammad Ansab Ali, Tariq Saeed Khan,

The Petroleum

Institute, Khalifa University of Science and Technology, Abu

Dhabi, Abu Dhabi, United Arab Emir.,

Saqib Salam, Ebrahim

Al-Hajri,

Petroleum Institute of Abu Dhabi, Abu Dhabi, United

Arab Emir.

11:32am – Effect of Inter-Connector on Thermo-Hydraulic

Characteristics of Parallel and Counter Flow Mini-Channel

Heat Sink

Technical Paper Publication. IMECE2018-88273

Amitav Tikadar, Saad Oudah,

University of South Carolina,

Columbia, SC, United States,

Azzam Salman,

University of

South Carolina, West Columbia, SC, United States,

A.K.M.

Monjur Morshed,

Bangladesh University of Engineering and

Technology, Dhaka, Bangladesh,

Titan Paul,

University of

South Carolina Aiken, Aiken, SC, United States,

Jamil Khan,

University of South Carolina, Columbia, SC, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

THURSDAY, NOVEMBER 

150

11:53am – Heat Transfer Enhancement in Minichannel Flow

Technical Paper Publication. IMECE2018-88539

Luis Serrano,

Universidad del Turabo, Villalba, PR, United

States,

Jose G. Pedro,

Universidad del Turabo, Canovanas,

PR, United States,

Jahian Rodríguez,

Universidad del Turabo,

Cidra, PR, United States,

Gerardo Carbajal,

Universidad del

Turabo, Caguas, PR, United States

10-14 K7-2 COMPUTATIONS OF

THERMOPHYSICAL PROPERTIES

10-14-2 Calculations ofThermophysical Properties 2

Third Floor, David L. Lawrence Convention Center, Room 326

2:05pm–3:50pm

Session Chair: Nicholas Roberts,

Utah State University,

Logan, UT, United States

2:05pm – One, Two, and Three-Dimensional Crossover of

the Thermal Transport in ZrTe5

Technical Presentation. IMECE2018-86753

Tianli Feng, Sokrates Pantelides,

Vanderbilt University,

Nashville, TN, United States

2:26pm – Thermal Characterization of Carbon Nanoﬁber

Structures Based on Their Aspect Ratio

Technical Presentation. IMECE2018-87558

Amir Behbahanian, Nicholas Roberts,

Utah State University,

Logan, UT, United States

2:47pm – Computation of Thermophysical Properties of Jet

Impingement Heat Transfer

Technical Presentation. IMECE2018-89519

Anuj Kumar Shukla, Anupam Dewan,

Indian Institute of

Technology, Delhi, New Delhi, Delhi, India

3:08pm – Giant Reduction of Thermal Transport in

Polyvinylidene Fluoride Under Tensile Strains

Technical Presentation. IMECE2018-89789

Tengfei Ma, Lei Cao, Yan Wang,

University of Nevada, Reno,

Reno, NV, United States

3:29pm – Anomalously Temperature-Dependent Thermal

Conductivity of Monolayer GaN With Large Deviations

From the Traditional 1/T Law

Technical Presentation. IMECE2018-89008

Guangzhao Qin,

University of South Carolina, Columbia, SC,

United States,

Zhenzhen Qin,

Zhengzhou University,

Zhengzhou, Henan, China,

Huimin Wang,

Northeastern

University, Shenyang, Liaoning, China,

Ming Hu,

University of

South Carolina, Columbia, SC, United States

10-29 K9-9 NANOSCALE HEAT TRANSPORT

IN PRACTICAL SYSTEMS

10-29-1 Heat Conduction in 2D Materials/Devices

Third Floor, David L. Lawrence Convention Center, Room 324

2:05pm–3:50pm

Session Chair: Sanjiv Sinha,

University of Illinois at Urbana-

Champaign, Urbana, IL, United States

Session Co-Chairs: Yaguo Wang,

University of Texas, Austin,

TX, United States,

Michael Pettes,

LANL MPA-CINT,

Albuquerque, NM, United States

2:05pm – Phonon Hydrodynamic Viscosity in Suspended

Graphene

Technical Presentation. IMECE2018-89594

Xun Li, Sangyeop Lee,

University of Pittsburgh, Pittsburgh,

PA, United States

2:26pm – Crossover of Phonon Transport Regimes in

Suspended Graphene

Technical Presentation. IMECE2018-89595

Xun Li, Sangyeop Lee,

University of Pittsburgh, Pittsburgh,

PA, United States

2:47pm – Exploring Nanoscale Heat Transport in Emerging

High Thermal Conductivity Materials for Advanced Thermal

Management

Technical Presentation. IMECE2018-86051

Joon Sang Kang, Huan Wu, Man Li, Yongjie Hu,

University of

California, Los Angeles, Los Angeles, CA, United States

3:08pm – Nanoscale Heat Transfer and Phonon Spectral

Mapping in Novel 2D Materials for Thermal Regulation and

Energy Harvesting

Technical Presentation. IMECE2018-86054

Joon Sang Kang, Man Li, Ming Ke, Yongjie Hu,

University of

California, Los Angeles, Los Angeles, CA, United States

3:29pm – Two-Dimensional Heat Transfer Considerations

for Thermoreﬂectance Measurements

Technical Paper Publication. IMECE2018-88657

Dipta Sarkar, Partha P. Chakraborty, B. Terry Beck, Zayd

Leseman,

Kansas State University, Manhattan, KS, United

States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

THURSDAY, NOVEMBER 

151

10-30 K10-1 SINGLE-PHASE ENHANCED

HEAT TRANSFER—NUMERICAL STUDIES

10-30-1 Single-Phase Enhanced Heat Transfer:

Numerical Studies II

Fourth Floor, David L. Lawrence Convention Center, Room 406

2:05pm–3:50pm

Session Chair: Maulik Shelat,

Praxair, Williamsville, NY, United

States

2:05pm – An Eight-Passage Serpentine Design for Negating

Coriolis Force Effect on Heat Transfer

Technical Paper Publication. IMECE2018-86354

Prashant Singh, Srinath Ekkad,

North Carolina State

University, Raleigh, NC, United States

2:26pm – High Porosity and High Pore Density Thin Copper

Foams for Compact Electronics Cooling

Technical Paper Publication. IMECE2018-86355

Sanskar Panse, Prashant Singh, Srinath Ekkad,

North

Carolina State University, Raleigh, NC, United States

2:47pm – Thermohydraulic Effect of Aspect Ratio on

Combination Angled Dimpled in a Rectangular Channel

Technical Paper Publication. IMECE2018-86558

Samson A. Aasa,

University of Johanessburg, Johannessburg,

Gauteng, South Africa,

Tien-Chien Jen,

University of

Johannesburg, Johannesburg, South Africa

3:08pm – A Numerical Analysis of Heat Transfer

Enhancement by Turbulence Generated From Swirl Flow by

Twisted Tape

Technical Paper Publication. IMECE2018-86616

Muhammad Azmain Abdullah,

City University, Dhaka, Dhaka,

Bangladesh,

M. Ruhul Amin,

Montana State University,

Bozeman, MT, United States,

Mohammad Ali,

Bangladesh

University of Engineering and Technology, Dhaka, Bangladesh

10-50 K19-3 HEAT TRANSFER IN HVAC

SYSTEMS AND AIR QUALITY AND

COMFORT IN CONFINED SPACES

10-50-1 Heat Transfer in HVAC Systems and Air

Quality and Comfort in Conned Spaces

Third Floor, David L. Lawrence Convention Center, Room 325

2:05pm–3:50pm

Session Chair: Kashif Nawaz,

Oak Ridge National Laboratory,

Oak Ridge, TN, United States

Session Co-ChairS: S.A. Sherif,

University of Florida,

Gainesville, FL, United States,

Michael Pate,

Texas A&M

University, College Station, TX, United States

2:05pm – Cooling Systems for Refuge Alternatives in Hot

Mine Conditions

Technical Paper Publication. IMECE2018-87507

Lincan Yan, David Yantek, Miguel Reyes, Nicholas Damiano,

Justin Srednicki, Joseph Bickson, Bruce Whisner,

CDC/NIOSH, Pittsburgh, PA, United States,

Eric Bauer,

BCS Life Support LLC, Titusville, FL, United States

2:26pm – An Embedded Mechatronic Device for Real-Time

Monitoring and Prediction of Occupants—Thermal Comfort

Technical Paper Publication. IMECE2018-87632

Boris Pavlin, Giovanni Carabin, Giovanni Pernigotto,

Renato Vidoni, Andrea Gasparella,

Free University of

Bolzano, Bolzano, Italy

2:47pm – Net-Zero Water (NZW) Reuse Desiccant Assisted

Evaporative Cooling System for Data Centers

Technical Presentation. IMECE2018-89738

David Okposio,

Purdue University Northwest, Hammond, IN,

United States,

A.G. Agwu Nnanna,

University of Texas of the

Permian Basin, Odessa, TX, United States

3:08pm – Sublimating Paradichlorobenzene Spheres in a

Natural Convection Environment

Technical Presentation. IMECE2018-86427

William S. Janna,

University of Memphis, Memphis, TN,

United States,

Willi P. Anderson,

University of Tennessee

Knoxville, Knoxville, TN, United States,

Jeffrey G. Marchetta,

William Janna,

University of Memphis, Memphis, TN, United

States

3:29pm – Thermal Properties of a Concrete Aerogel Paste

Composite

Technical Paper Publication. IMECE2018-88660

Chris Kobus, J. David Schall,

Oakland University, Rochester,

MI, United States

10-61 K8-7 FUNDAMENTALS OF BOILING

AND CONDENSATION – II

10-61-1 K8-7 Fundamentals of Boiling and

Condensation – II-B

Third Floor, David L. Lawrence Convention Center, Room 323

2:05pm–3:50pm

Session Chair: Sajjad Bigham,

Michigan Technological

University, Houghton, MI, United States

Session Co-Chair: Enakshi Wikramanayake,

University of

Texas at Austin, Austin, TX, United States

2:05pm – Theoretical Analysis of Moisture Condensation on

a Cold Heat Sink

Technical Paper Publication. IMECE2018-86228

Run Yan, Hongbin Ma,

University of Missouri, Columbia, MO,

United States

2:26pm – Membranes for Microscale Phase Separation of

Completely Wetting Liquids

Technical Presentation. IMECE2018-88296

Mojtaba Hosseinnia, Sajjad Bigham,

Michigan Technological

University, Houghton, MI, United States

2:47pm – Sucking-Flow Condensation Heat Transfer on

Hierarchical Structured Surfaces

Technical Presentation. IMECE2018-87265

Rongfu Wen, Yung-Cheng Lee, Ronggui Yang,

University of

Colorado Boulder, Boulder, CO, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

THURSDAY, NOVEMBER 

152

3:08pm – Critical Radius of Bubble Nucleation in Pool

Boiling

Technical Presentation. IMECE2018-88972

Manish Gupta, Shalabh Maroo,

Syracuse University,

Syracuse, NY, United States

10-62 K10-3 SINGLE-PHASE ENHANCED

HEAT TRANSFER—APPLICATIONS AND

EXPERIMENTS

10-62-1 Single-Phase Enhanced Heat Transfer—

Applications

Third Floor, David L. Lawrence Convention Center, Room 327

2:05pm–3:50pm

Session Chair: Mark Kedzierski,

NIST, Gaithersburg, MD,

United States

Session Co-Chairs: Kashif Nawaz,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States,

Yaroslav

Chudnovsky,

Gas Technology Institute, Des Plaines, IL, United

States

2:05pm – Heat Transfer Augmentation From Extended

Surface Using Dimples

Technical Paper Publication. IMECE2018-87345

Jay Mehta, Fay Nicole Colah, Anurag Rao, Vineeta Pendse,

University of Mumbai, Mumbai, Maharashtra, India,

Vyankatesh Bagal,

Dwarkadas J. Sanghvi College of

Engineering, Mumbai, Maharashtra, India,

Kevin Ajmera,

University of Mumbai, Mumbai, Maharashtra, India

2:26pm – An Experimental and Numerical Study of Heat

Transfer and Flow Characteristics of Laminar Flow in a

Circular Tube With Wedge-Shaped Wavy-Tape Inserts

Technical Paper Publication. IMECE2018-88335

Yunmin Liang, Peng Liu, Nianben Zheng, Feng Shan,

Zhichun Liu, Wei Liu,

Huazhong University of Science &

Technology, China, Wuhan, China

2:47pm – Heat Transfer by a Rotating Liquid Jet

Impingement Cooling System

Technical Paper Publication. IMECE2018-88377

Qi Lu, Sivapathas Parameswaran, Beibei Ren,

Texas Tech

University, Lubbock, TX, United States

3:08pm – Waterblock Modelling for GPU Liquid Cooling

Technical Paper Publication. IMECE2018-88567

Jose-Carlos Vargas-Vazquez, Jose-Angel Gutierrez-Garcia,

Luis Luviano-Ortiz, Abel Hernandez-Guerrero,

University of

Guanajuato, Salamanca, Guanajuato, Guanajuato, Mexico,

Jose-Luis Zuñiga-Cerroblanco,

Juventino Rosas Polytechnic

University, Guanajuato, Aguascalientes, Mexico

3:29pm – Correlating Friction Factors and Nusselt Numbers

for Laminar Simultaneously Developing Flow in

Rectangular Plain Plate-Fin Channels

Technical Presentation. IMECE2018-89137

Kuan-Ting Lin, Dantong Shi, Milind Jog, Raj M. Manglik,

University of Cincinnati, Cincinnati, OH, United States

10-1 GENERAL

10-1-1 Analysis ofThermal Systems

Third Floor, David L. Lawrence Convention Center, Room 325

4:00pm–5:45pm

Session Chair: Kevin Dowding,

Sandia National Laboratories,

Albuquerque, NM, United States

4:00pm – CFD Modelling of Counter-Current Packed Bed

for HDH Desalination System

Technical Presentation. IMECE2018-89749

Clement Roy, James Klausner, Andre Benard,

Sina Jahangirimamouri,

Michigan State University, East

Lansing, MI, United States

4:21pm – Experimental Investigation of Heat/Mass Transfer

and Pressure Drop in a Multi-String Humidiﬁer

Technical Presentation. IMECE2018-89274

Zezhi Zeng, Abolfazl Sadeghpour, Y. Sungtaek Ju,

University

of California, Los Angeles, Los Angeles, CA, United States

4:42pm – Measurement of Heat Transfer Coefﬁcient in

Interaction Zone of Multiple Liquid Jet Impingements

Technical Presentation. IMECE2018-89186

Chaitanya Ghodake, Bharat Forge,

Pune, Maharshtra, India

5:03pm – Numerical Study of Forced Convection in

Different Fluids From Stationary Heated Cylinders in a

Square Enclosure

Technical Paper Publication. IMECE2018-87032

Srishti Mishra, Mukul Tomar, Adeel Ahmad, Satvik Jain,

Naveen Kumar,

Delhi Technological University, Delhi, India

10-28 K9-8 ADVANCES IN SIMULATION

METHODS

10-28-1 K9-8 Advances in Simulation Methods

Third Floor, David L. Lawrence Convention Center, Room 324

4:00pm–5:45pm

Session Chair: Dong Liu,

University of Houston, Houston, TX,

United States

4:00pm – Prediction of Four-Phonon Scattering and Related

Thermal Properties

Invited Presentation. IMECE2018-89439

Tianli Feng,

Purdue University, West Lafayette, IN, United

States,

Lucas Lindsay,

Oak Ridge National Lab, Oak Ridge,

TN, United States,

Xiulin Ruan,

Purdue University, West

Lafayette, IN, United States

4:42pm – Mapping of Phonon Modes Between Two-

Dimensional and Three-Dimensional Systems

Technical Presentation. IMECE2018-86938

Hyun-Young Kim, Alan McGaughey,

Carnegie Mellon

University, Pittsburgh, PA, United States

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

THURSDAY, NOVEMBER 

153

5:03pm – Quantifying Uncertainty in First-Principles

Predictions of Phonon Dispersion Relations

Technical Presentation. IMECE2018-89140

Holden Parks, Venkat Viswanathan, Alan McGaughey,

Carnegie Mellon University, Pittsburgh, PA, United States

5:24pm – Determining Inﬂuential Descriptors for Polymer

Chain Conformation Based on Empirical Force-Fields and

Molecular Dynamics Simulations

Technical Presentation. IMECE2018-86305

Ruimin Ma, Tengfei Luo,

University of Notre Dame, Notre

Dame, IN, United States

10-30 K10-1 SINGLE-PHASE ENHANCED

HEAT TRANSFER—NUMERICAL STUDIES

10-30-3 Single-Phase Enhanced Heat Transfer:

Numerical Studies – III

Fourth Floor, David L. Lawrence Convention Center, Room 406

4:00pm–5:45pm

Session Chair: Sandra Boetcher,

Embry-Riddle Aeronautical

University, Daytona Beach, FL, United States

4:00pm – Three-Tier Impingement Cooling Design for Gas

Turbine Blade Trailing Edge

Technical Paper Publication. IMECE2018-86430

Kishore Ranganath Ramakrishnan, Prashant Singh, Srinath

Ekkad,

North Carolina State University, Raleigh, NC, United

States

4:21pm – Experimental Investigation of Heat Transfer

Enhancement Through Array Jet Impingement on Various

Conﬁgurations of High Porosity Thin Metal Foams

Technical Paper Publication. IMECE2018-86432

Srivatsan Madhavan, Prashant Singh, Srinath Ekkad,

North

Carolina State University, Raleigh, NC, United States

4:42pm – Heat Dissipator With Aztec Inspired Radial

Geometry

Technical Paper Publication. IMECE2018-88570

Alheli Perez-Hernandez, Luis Luviano-Ortiz, Abel

Hernandez-Guerrero,

University of Guanajuato, Salamanca,

Guanajuato, Guanajuato, Mexico,

Israel Botello-Arredondo,

Universidad Autónoma de Ciudad Juárez, Ciudad Juarez,

Chihuahua, Mexico

10-61 K8-7 FUNDAMENTALS OF BOILING

AND CONDENSATION – II

10-61-2 K8-7 Fundamentals of Condensation,

Transient Boiling, and Dehumidication

Third Floor, David L. Lawrence Convention Center, Room 323

4:00pm–5:45pm

Session Chair: Alexander Rattner,

Pennsylvania State

University, University Park, PA, United States

Session Co-Chair: Enakshi Wikramanayake,

University of

Texas at Austin, Austin, TX, United States

4:00pm – Heat Transfer During Condensing Droplet

Coalescence

Technical Presentation. IMECE2018-87618

Sanjay Adhikari, Alexander Rattner,

Pennsylvania State

University, University Park, PA, United States

4:21pm – Cavitation Corrosions in Capillary Pulsating Heat

Pipe

Technical Paper Publication. IMECE2018-88088

Steve Cai,

Independent Author, Manlius, NY, United States

4:42pm – Development of In-Water, Transient Boiling

Detector

Technical Presentation. IMECE2018-88932

Ezekiel Villarreal,

University of Pittsburgh, Pittsburgh, PA,

United States,

Austin Fleming, Eric D. Larsen, Colby Jensen,

Idaho National Laboratory, Idaho Falls, ID, United States,

Heng Ban,

University of Pittsburgh, Pittsburgh, PA, United

States

5:03pm – Sodium Pumping via Condensation Within a

Non-Wetting Porous Structure

Technical Presentation. IMECE2018-89197

Alexander Limia, Peter Kottke, Ritesh Bhatt, Andrei G.

Fedorov, Shannon K. Yee,

Georgia Institute of Technology,

Atlanta, GA, United States

5:24pm – Multi-String Dehumidiﬁer, an Experimental Study

Technical Presentation. IMECE2018-89491

Abolfazl Sadeghpour, Zezhi Zeng, Y. Sungtaek Ju,

University

of California, Los Angeles, Los Angeles, CA, United States

5:45pm – Reducing Contact Time of a Bouncing Drop in

Janus State

Technical Presentation. IMECE2018-87279

Chu-Yao Chou, Venkataraman Sahoo, Ching-Wen Lo,

Ming-Chang Lu,

National Chiao Tung University, Hsinchu,

Taiwan

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

THURSDAY, NOVEMBER 

154

10-63 K10-4 MULTI-PHASE AND PASSIVE

ENHANCED HEAT TRANSFER

10-63-1 Multi-Phase and Passive Enhanced Heat

Transfer

Third Floor, David L. Lawrence Convention Center, Room 327

4:00pm–5:45pm

Session Chair: Kashif Nawaz,

Oak Ridge National Laboratory,

Oak Ridge, TN, United States

4:00pm – Natural Convection Heat Transfer With Horizontal

Rectangular Fin Array Using Straight Knurling Patterns on

Fins: An Experimental Study

Technical Paper Publication. IMECE2018-86449

Rahul Chikurde, Basavraj Kothavale,

Maeer’s - MIT COE,

Pune, Maharashtra, India,

Narayan Sane,

Walchand College of

Engineering, Sangli, India

4:21pm – Numerical Study of Microencapsulated Phase

Change Material Slurries

Technical Presentation. IMECE2018-86681

Jonathan Young,

Western New England University, Ludlow,

MA, United States,

Anthony Santamaria, Jingru Benner,

Western New England University, Springeld, MA, United

States

4:42pm – Natural Convection in a Square Cavity Utilizing

Different Nanoﬂuids in Presence of Constant Magnetic

Field With Brownian Motion Effect

Technical Paper Publication. IMECE2018-87123

sarah Abdelaziz, Wael El-Maghlany, Ashraf S. Ismail,

Alexandria University, Alexandria, Egypt

5:03pm – Pool Boiling Heat Transfer Enhancement of Water

by Gold Nanoparticles With an Electrophoretic Deposition

Method

Technical Paper Publication. IMECE2018-87356

Zhen Cao, Anh Duc Pham, Zan Wu,

Lund University, Lund,

Sweden,

Tautgirdas Ruzgas, Cathrine Albèr,

Malmö

University, Malmö, Sweden,

Bengt Sunden,

Lund University,

Lund, Sweden

5:24pm – Experimental Study of Convective Heat Transfer

in Standard and Cross-Drilled Brake Discs With Radial

Vane and X-Lattice Cores

Technical Paper Publication. IMECE2018-86195

Hongbin Yan,

Northwestern Polytechnical University, Xi’an,

China,

Shangsheng Feng,

Xi’an Jiaotong University, Xi’an,

China,

Wei-Tao Wu,

Nanjing University of Science and

Technology, Nanjing, China,

Tian Jian Lu,

Xi’an Jiaotong

University, Xi’an, China,

Gongnan Xie,

Northwestern

Polytechnical University, Xi’an, China

TRACK  HEAT TRANSFER AND THERMAL ENGINEERING

–

THURSDAY, NOVEMBER 

155

NOTES

156

11-2-1: Nanomaterials for Energy I

11-2-2: Nanomaterials for Energy II

11-4-1: Materials and 3D Printing for Biology and Medicine

11-6-1: Nanoengineered, Hierarchical, Multi-Scale Materials and Structures

11-7-1: Fracture and Damage: Nano- to Macro-Scale I

11-7-2: Fracture and Damage: Nano- to Macro-Scale II

11-8-1: Material Processing of Flexible Electronics, Sensors, and Devices I

11-8-2: Material Processing of Flexible Electronics, Sensors, and Devices II

11-8-3: M

aterial Processing of Flexible Electronics, Sensors, and Devices III

11-8-4: Material Processing of Flexible Electronics, Sensors, and Devices IV

11-8-5: Material Processing of Flexible Electronics, Sensors, and Devices V

11-9-1: Materials Processing and Characterization I

11-9-2: Materials Processing and Characterization II

11-9-3: Materials Processing and Characterization III

11-9-4: Materials Processing and Characterization IV

11-9-5: Materials Processing and Characterization V

11-9-6: Materials Processing and Characterization VI

11-10-1: Bioinspired Compsoites and Structures

11-10-2: Bioinspired Materials, Structures and Applications

11-11-1: Modeling, Simulation and Design of Multifunctional Materials 1

11-11-2: Modeling, Simulation and Design of Multifunctional Materials 2

11-12-1: Mechanics in Manufacturing of Multifunctional Materials and Structures I

11-12-2: Mechanics in Manufac

ring of Multifunctional Materials and Structures II

11-13-1: Multiphysics and Multiscale Modeling of Lithium-Ion Batteries

11-14-1: Multifunctional Composite Materials and Structures 1

11-14-2: Multifunctional Composite Materials and Structures 2

11-14-3: Multifunctional Composite Materials and Structures 3

11-14-4: Multifunctional Composite Materials and Structures 4

11-15-1: Multifunctional Nanomaterials 1

11-15-2: Multifunctional Nanomaterials 2

11-18-1: Phase Transformations in Materials Processing I: A

dditive Manufacturing

11-18-2: Phase Transformations in Materials Processing II: Microstructures and

Properties

11-20-1: Recent Developments in Tribology

11-23-1: Materials: Genetics to Structures Plenary I

11-23-2: Materials: Genetics to Structures Plenary II

Track Organizers

Toshio Nakamura,

SUNY at Stony Brook,

United States

Markus Buehler,

MIT, United States

Topic Organizers

Hanqing Jiang,

Arizona State University,

United States

Arunkumar Subramanian,

University of

Illinois at Chicago, United States

Michael Pettes,

University of

Connecticut, United States

Lijie Grace Zhang,

George Washington

University, United States

Shida Miao,

George Washington

University, United States

Ram Mohan,

North Carolina A & T

University, United States

Wayne Hodo,

US Army – ERDC, United

States

Raghu Prakash,

Indian Institute of

Technology Madras, India

Vikram Jayaram,

Indian Institute of

Science, India

Ashok Saxena,

University of Arkansas,

United States

Aaron Mazzeo,

Rutgers, The State

University of New Jersey, United

States

Qiming Wang,

University of Southern

California, United States

Jianliang Xiao,

University of Colorado

Boulder, United States

Woon-Hong Yeo,

Georgia Institute of

Technology, United States

Yuris Dzenis,

University of Nebraska,

United States

Cunjiang Yu,

University of Houston,

United States

Sridhar Santhanam,

Villanova University,

United States

Seyed Allameh,

Northern Kentucky

University, United States

Zhenhai Xia,

University of North Texas,

United States

Travis Shihao Hu,

California State

University, Los Angeles, United States

Ling Liu,

Utah State University, United

States

Zhenhai Xia,

University of North Texas,

United States

Charles Wojnar,

Missouri S&T, United

States

Baoxing Xu,

University of Virginia, School

of Engineering and Applied Sciences,

United States

Kevin Turner,

University of Pennsylvania,

United States

Weiyi Lu,

Michigan State University,

United States

Xianqiao Wang,

University of Georgia,

United States

Jun Xu,

Beihang University, China

Elham Sahraei Esfahani,

George Mason

University, United States

Junfeng Xiao,

Huazhong University of

Science and Technology, China

Jun Xu,

Beihang University, China

Sha Yin,

Beihang University, China

Wei Gao,

University of Texas at San

Antonio, United States

Pei Dong,

George Mason University,

United States

Baoxing Xu,

University of Virginia, School

of Engineering and Applied Sciences,

United States

Mohsen Asle Zaeem,

Colorado School of

Mines, United States

Mahmood Mamivand,

Boise State

University, United States

Adrian Sabau,

Oak Ridge National

Laboratory, United States

Patricia Iglesias,

Rochester Institute of

Technology, United States

Ana Eva Jimenez Ballesta, T

echnical

University of Cartagena, Spain

Session Organizers

Robabeh Jazaei,

University of Nevada,

Las Vegas, United States

Eric Markvicka,

Carnegie Mellon

University, United States

Cunjiang Yu,

University of Houston,

United States

Patrick Brewick,

US Naval Research

Laboratory, United States

Zahabul Islam,

Pennsylvania State

University, United States

Mauricio Cornejo,

Escuela Superior

Politecnica del Litoral, Ecuador

Frank J. Shih,

Seattle University, United

States

Delm Soares,

University of Minho,

Portugal

Muhammad Rahman,

Wichita State

University, United States

Philippe Geubelle,

University of Illinois,

United States

Nicholas J. Morris,

UES, Inc./AFRL,

United States

Seyed Allameh,

Northern Kentucky

University, United States

Zhenhai Xia,

University of North Texas,

United States

Ling Liu,

Utah State University, United

States

Charles Wojnar,

Missouri S&T, United

States

Baoxing Xu,

University of Virginia, School

of Engineering and Applied Sciences,

United States

Weiyi Lu,

Michigan State University,

United States

Binghe Liu,

Beijing University of

Aeronautics and Astronautics, China

Sha Yin,

Beihang University, China

Akio Yonezu,

Chuo University, Japan

Sha Yin,

Beihang University, China

Pei Dong,

George Mason University,

United States

Wei Gao,

University of Texas at San

Antonio, United States

Mohsen Asle Zaeem,

Colorado School of

Mines, United States

Siddhartha Pathak,

University of Nevada,

Reno, United States

Patricia Iglesias,

Rochester Institute of

Technology, United States

Hong Guo,

Rochester Institute of

Technology, United States

TRACK 11 MATERIALS: GENETICS TO

STRUCTURES

MONDAY, NOVEMBER 12

11-2 NANOMATERIALS FOR ENERGY

11-2-1 Nanomaterials for Energy I

Third Floor, David L. Lawrence Convention Center, Room 321

9:45am–11:30am

Session Chair: Michael Pettes,

University of Connecticut,

Storrs, CT, United States

Session Co-Chair: Arunkumar Subramanian,

University of

Illinois at Chicago, Glen Allen, VA, United States

9:45am – Thermal Characteristic Study on Si-Ge

Heterostructure Interface Formed by Film-Wafer Bonding

Technical Presentation. IMECE2018-86443

Sien Wang, Dongchao Xu, Yue Xiao, Qing Hao,

University of

Arizona, Tucson, AZ, United States

10:06am – Understanding Processing Dependent

Morphology of P3HT:PCBM Bulk-Heterojunction Thin Films

by Coarse-Grained Molecular Simulations

Technical Presentation. IMECE2018-86438

Joydeep Munshi,

Lehigh University, Bethlehem, PA, United

States,

Wei Chen,

Northwestern University, Evanston, IL,

United States,

TeYu Chien,

University of Wyoming, Laramie,

WY, United States,

Ganesh Balasubramanian,

Lehigh

University, Bethlehem, PA, United States

10:27am – Electrochemical-Mechanical Modeling and

Degradation Analysis of Li-ion Batteries: Part I

Technical Presentation. IMECE2018-87409

Wei Lu,

University of Michigan, Ann Arbor, MI, United States

10:48am – Electrochemical-Mechanical Modeling and

Degradation Analysis of Li-Ion Batteries: Part II

Technical Presentation. IMECE2018-87410

Wei Lu,

University of Michigan, Ann Arbor, MI, United States

11:09am – Stabilization of Graphene Dispersions by

Cellulose Nanocrystals Colloids

Technical Paper Publication. IMECE2018-87830

Danny Illera,

Universidad del Norte, Barranquilla, Colombia,

Chatura Wickramaratne, Diego Guillen, Chand Jotshi,

University of South Florida, Tampa, FL, United States,

Humberto Gomez,

Universidad del Norte, Barranquilla,

Colombia,

D. Yogi Goswami,

University of South Florida,

Tampa, FL, United States

11-7 FRACTURE AND DAMAGE: NANO-

TO MACRO-SCALE

11-7-1 Fracture and Damage: Nano- to Macro-Scale I

Third Floor, David L. Lawrence Convention Center, Room 320

9:45am–11:30am

Session Chair: Raghu Prakash,

Indian Institute of Technology

Madras, Chennai, India

Session Co-Chair: Robabeh Jazaei,

University of Nevada, Las

Vegas, Las Vegas, NV, United States

9:45am – Effect of Hold-Time Interspersed With Cyclic

Loading on Corrosion Fatigue Crack Growth Rate of a

Steel in Sodium Chloride Solution

Technical Paper Publication. IMECE2018-86417

Raghu Prakash,

Indian Institute of Technology Madras,

Chennai, India,

Dhinakaran Sampath,

University of

Manchester, Manchester, United Kingdom

10:06am – Degradation of the Strength of a Grain and a

Grain Boundary Due to the Accumulation of the Structural

Defects of Crystal

Technical Paper Publication. IMECE2018-87264

Guoxiong Zheng, Yifan Luo, Hideo Miura,

Tohoku University,

Sendai, Miyagi, Japan

10:27am – Crystallinity-Induced Variation of the Electronic

Characteristics of Electroplated Gold Thin Films

Technical Paper Publication. IMECE2018-87278

Yutaro Nakoshi,

Tohoku University, Aoba-ku, Seidai, Japan,

Hideo Miura,

Tohoku University, Sendai, Miyagi, Japan

10:48am – A Crack Detection and Evaluation Method for

Self-Piercing Riveting

Technical Paper Publication. IMECE2018-88403

Xuyang Wang, Yudong Fang,

Chongqing University,

Chongqing, China,

Zhenfei Zhan,

Chongqing University,

Livonia, MI, United States

11:09am – Energy Absorption of Cementitious Composite

Incorporating Polypropylene and Cold-Drawn Shaved Steel

Fiber Under Low-Velocity Impact Test

Technical Presentation. IMECE2018-88514

Robabeh Jazaei, Samad Gharehdaghi, Fatemeh Azari,

University of Nevada, Las Vegas, Las Vegas, NV, United States

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

MONDAY, NOVEMBER 

157

11-8 MATERIAL PROCESSING OF FLEXIBLE

ELECTRONICS, SENSORS, AND DEVICES

11-8-1 Material Processing of Flexible Electronics,

Sensors, and Devices I

Third Floor, David L. Lawrence Convention Center, Room 330

9:45am–11:30am

Session Chair: Cunjiang Yu,

University of Houston, Houston,

TX, United States

Session Co-Chair: Jianliang Xiao,

University of Colorado

Boulder, Boulder, CO, United States

9:45am – Flexible, Stretchable and Healable Electronics

Invited Presentation. IMECE2018-89522

Fabio Cicoira,

Polytechnique Montréal, Montréal, QC, Canada

10:27am – Fully Rubbery Integrated Electronics and

Sensors

Technical Presentation. IMECE2018-89840

Cunjiang Yu, Kyoseung Sim,

University of Houston, Houston,

TX, United States

10:48am – Motion Artifact Free Monitoring of EMG/ECG

Biopotentials Using Sub-300 nm Self-Adhesive and Ultra-

Conformable Au/Parylene Thin-Film Electrodes

Technical Presentation. IMECE2018-89610

Robert Nawrocki,

Purdue University, West Lafayette, IN,

United States,

Hanbit Jin, Sunghoon Lee, Tomoyuki Yokota,

Masaki Sekino, Takao Someya,

University of Tokyo, Tokyo,

Japan

11:09am – Transparent, Stretchable Conductor With Direct

Laser Writing

Technical Presentation. IMECE2018-89805

Chengfeng Pan, Kitty Kumar,

Carnegie Mellon University,

Pittsburgh, PA, United States,

Jianzhao Li,

Unversity of

Toronto, Toronto, ON, Canada,

Eric Markvicka,

Carnegie

Mellon University, Pittsburgh, PA, United States,

Peter

Herman,

Unversity of Toronto, Toronto, ON, Canada,

Carmel

Majidi,

Carnegie Mellon University, Pittsburgh, PA, United

States

11-11 MODELING, SIMULATION, AND

DESIGN OF MULTIFUNCTIONAL

MATERIALS

11-11-1 Modeling, Simulation and Design of

Multifunctional Materials 1

Fourth Floor, David L. Lawrence Convention Center, Room 407

9:45am–11:30am

Session Chair: Ling Liu,

Utah State University, Logan, UT,

United States

Session Co-Chairs: Charles Wojnar,

Missouri S&T, Rolla, MO,

United States,

Zhenhai Xia,

University of North Texas, Denton,

TX, United States

9:45am – Metal-Organic-Frameworks as Efﬁcient

Electrocatalysts for Oxygen Evolution Reaction: Insights

Into the Active Centers

Technical Presentation. IMECE2018-86624

Chun-Yu Lin,

University of North Texas, Denton, TX, United

States,

Shuangyin Wang,

Hunan University, Changsha, China,

Zhenhai Xia,

University of North Texas, Denton, TX, United

States

10:06am – Dimensional Control of Defect Dynamics in

Perovskite Oxide Superlattices

Technical Presentation. IMECE2018-89356

Lipeng Zhang,

Beijing University of Chemical Technology,

Beijing, China,

Haixuan Xu, Isaac Bredeson,

University of

Tennessee, Knoxville, TN, United States,

Valentino R. Cooper,

Paul R. Kent,

Oak Ridge National Laboratory, Oak Ridge, TN,

United States

10:27am – Numerical Investigation on Percolation

Threshold of CNT-Reinforced Conductive Composites

Based on Three-Dimensional Monte Carlo Method

Technical Paper Publication. IMECE2018-86794

Zhuangzhuang He, Lijun Li,

Beihang University, Beijing,

China,

Taikun Wang, Yantao Wang,

Henan Key Laboratory

of Underwater Intelligent Equipment, Zhengzhou

Electromechanical Engineering, Zhengzhou, China,

Xudong Yang, Wenming Yang,

Beihang University, Beijing,

China

10:48am – Dexterous Hybrid Robotics for High Precision

Applications

Technical Paper Publication. IMECE2018-86856

Mitch Crowther, Nolan Jackson, Minchul Shin,

Georgia

Southern University, Statesboro, GA, United States

11:09am – Uncertainty Quantiﬁcation of Artiﬁcial Neural

Network Based Machine Learning Potentials

Technical Paper Publication. IMECE2018-88071

Yumeng Li, Weirong Xiao, Pingfeng Wang,

University of

Illinois at Urbana-Champaign, Urbana, IL, United States

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

MONDAY, NOVEMBER 

158

11-2 NANOMATERIALS FOR ENERGY

11-2-2 Nanomaterials for Energy II

Third Floor, David L. Lawrence Convention Center, Room 321

1:45pm–3:30pm

Session Chair: Arunkumar Subramanian,

University of Illinois

at Chicago, Glen Allen, VA, United States

Session Co-Chair: Michael Pettes,

University of Connecticut,

Storrs, CT, United States

1:45pm – Energy Sensitivity of Charge Carriers for

Detecting Scattering and Transport

Technical Presentation. IMECE2018-88970

Shuang Tang,

State University of New York, Utica, NY, United

States

2:06pm – Guiding Principles for Designing Highly-Efﬁcient

Metal-Free Carbon Catalysts

Technical Presentation. IMECE2018-89358

Lipeng Zhang,

Beijing University of Chemical Technology,

Beijing, China,

Zhenhai Xia,

University of North Texas, Denton,

TX, United States

2:27pm – Advanced FeOOH-MWCNTS Composite Negative

Electrodes With High Areal Capacitance for Asymetric

Supercapacitors

Technical Presentation. IMECE2018-89814

Ri Chen, Rakesh Sahu, Igor Zhitomirsky, Ishwar K. Puri,

McMaster University, Hamilton, ON, Canada

2:48pm – Entropy Generation Minimization in Polyurethane

Silica Nano-Composite Membrane

Technical Presentation. IMECE2018-89848

Omar Almahmoud, Tae-Youl Choi,

University of North Texas,

Denton, TX, United States

3:09pm – Oxygen and Water Vapor Effects on

Photoelectronic Properties of Monolayer Tungsten

Disulﬁde via Chemical Vapor Deposition

Technical Presentation. IMECE2018-89869

Hanyu Zhang, Jeremy Dunklin, Obadiah Reid, Sanjini

Nanayakkara, Jeffrey Blackburn, Elisa M. Link,

National

Renewable Energy Laboratory, Golden, CO, United States

11-7 FRACTURE AND DAMAGE: NANO-

TO MACRO-SCALE

11-7-2 Fracture and Damage: Nano- to Macro-Scale II

Third Floor, David L. Lawrence Convention Center, Room 320

1:45pm–3:30pm

Session Chair: Eric Markvicka,

Carnegie Mellon University,

Pittsburgh, PA, United States

Session Co-Chair: Ram Mohan,

North Carolina A&T

University, Greensboro, NC, United States

1:45pm – Tensile Deformation Mechanisms in Nickel-Cobalt

Core-Shell Nanowires via Molecular Dynamics Simulations

Technical Presentation. IMECE2018-89138

Ali Shiave,

University of North Carolina at Greensboro,

Greensboro, NC, United States,

Ram Mohan,

North Carolina

A&T University, Greensboro, NC, United States

2:06pm – Stiffness Percolation at High Crack Densities:

Fragmentation and Interlocking

Technical Presentation. IMECE2018-89298

Anirban Pal, Catalin Picu,

Rensselaer Polytechnic Institute,

Troy, NY, United States

2:27pm – Damage Detection and Localization in Soft-

Matter Systems

Technical Presentation. IMECE2018-89585

Eric Markvicka,

Carnegie Mellon University, Pittsburgh, PA,

United States,

Michael D. Bartlett, Ravi Tutika,

Iowa State

University, Ames, IA, United States,

Carmel Majidi,

Carnegie

Mellon University, Pittsburgh, PA, United States

2:48pm – Investigating Damage Initiation Sites in Metallic

Microstructures Using Atomistic Modeling of Interfaces

Technical Presentation. IMECE2018-89613

Jacob Tavenner,

Colorado School of Mines, Golden, CO,

United States,

Ian Bakst,

Colorado State University, Fort

Collins, CO, United States,

Garritt Tucker,

Colorado School of

Mines, Golden, CO, United States,

Christopher Weinberger,

Colorado State University, Fort Collins, CO, United States

3:09pm – Inﬂuences of Plasticity-Induced Crack Closure on

Fatigue Crack Healing of Carbon Steel With Heat Treatment

Technical Paper Publication. IMECE2018-86650

Eiichi Hamada, Yuto Furuya, Atsushi Hosoi,

Waseda

University, Tokyo, Shinjuku, Japan,

Yuji Morita,

Nippon

Pneumatic Mfg. Co., Ltd., Mie, Nabari, Japan,

Hiroyuki

Kawada,

Waseda University, Tokyo, Shinjuku, Japan

11-8 MATERIAL PROCESSING OF FLEXIBLE

ELECTRONICS, SENSORS, AND DEVICES

11-8-2 Material Processing of Flexible Electronics,

Sensors, and Devices II

Third Floor, David L. Lawrence Convention Center, Room 330

1:45pm–3:30pm

Session Chair: Jianliang Xiao,

University of Colorado Boulder,

Boulder, CO, United States

Session Co-Chair: Qiming Wang,

University of Southern

California, Los Angeles, CA, United States

1:45pm – Cellulose in Electrical and Electrochemical

Flexible Devices

Invited Presentation. IMECE2018-89411

Luis Pereira,

CENIMAT/I3N, Caparica, Portugal

2:27pm – Nanoporous Paper-Based Electrodes for

Biosensing

Technical Presentation. IMECE2018-89592

Ramendra Pal, Tongfen Liang, Thomas McGovern,

Samantha Moy, Mehdi Javanmard, Aaron Mazzeo,

Rutgers,

The State University of New Jersey, Piscataway, NJ, United

States

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

MONDAY, NOVEMBER 

159

2:48pm – Rehealable, Fully Recyclable and Malleable

Electronic Skin

Technical Presentation. IMECE2018-89028

Zhanan Zou, Jianliang Xiao, Wei Zhang,

University of

Colorado Boulder, Boulder, CO, United States

3:09pm – A Field Deployable Biosensor for Virus Detection

Using DNA Hybridization

Technical Presentation. IMECE2018-89833

Jessica Snyder, Trevor Kalkus,

Universities Space Research

Association, Sunnyvale, CA, United States,

Jesica Urbina,

Nils Averesch,

Universities Space Research Association,

Mountain View, CA, United States,

David Biehert,

Geological Survey, Madison, WI, United States,

Lynn

Rothschild,

NASA, Moffett Field, CA, United States

11-11 MODELING, SIMULATION, AND

DESIGN OF MULTIFUNCTIONAL

MATERIALS

11-11-2 Modeling, Simulation and Design of

Multifunctional Materials 2

Fourth Floor, David L. Lawrence Convention Center, Room 407

1:45pm–3:30pm

Session Chair: Ling Liu,

Utah State University, Logan, UT,

United States

Session Co-Chairs: Charles Wojnar,

Missouri S&T, Rolla, MO,

United States,

Zhenhai Xia,

University of North Texas, Denton,

TX, United States

1:45pm – A Multiphysics Thermoelastoviscoplastic Damage

Coupled With a Magnetism Internal State Variable Model

Technical Presentation. IMECE2018-87945

Mounia Malki, Mark Horstemeyer, Michael Baskes,

Yucheng Liu, Lei Chen,

Mississippi State University, Starkville,

MS, United States

2:06pm – Viscoelastic Behavior of Carbon Nanotube Yarns

and Twisted Coils

Technical Paper Publication. IMECE2018-88095

Pouria Khanbolouki, Mehran Tehrani,

University of New

Mexico, Albuquerque, NM, United States

2:27pm – Multi-ﬁeld, Multi-layer, and Segmented

Composite Beam Optimization for Shape, Work, and Cost

Technical Presentation. IMECE2018-89910

Anil Erol, Mary Frecker, Paris Von Lockette,

Pennsylvania

State University, University Park, PA, United States

2:48pm – A Thermo-Electro-Elasto-Viscoplastic Damage

Internal State Variable (ISV) Model for Ductile Metals

Technical Paper Publication. IMECE2018-86598

Nikolay Dimitrov, Yucheng Liu, Mark Horstemeyer,

Mississippi State University, Starkville, MS, United States

3:09pm – Hybrid Alumina Composites for Cutting Tool

Inserts: Material Design and Development

Technical Paper Publication. IMECE2018-87255

Taha Waqar, Syed Sohail Akhtar, Abul Fazal M. Arif, Khaled

Al-Athel,

King Fahd University of Petroleum & Minerals,

Dhahran, Saudi Arabia

11-4 MATERIALS AND 3D PRINTING FOR

BIOLOGY AND MEDICINE

11-4-1 Materials and 3D Printing for Biology and

Medicine

Fourth Floor, David L. Lawrence Convention Center, Room 407

3:45pm–5:30pm

Session Chair: Lijie Grace Zhang,

George Washington

University, Washington, DC, United States

3:45pm – 3D Printed Shape-Changing Cardiovascular

Implants for Accommodating Growth

Technical Presentation. IMECE2018-89032

Ozan Erol,

Johns Hopkins University, Aberdeen, MD, United

States,

Emilio Bachtiar, Azra Horowitz, Sung Kang,

Johns

Hopkins University, Baltimore, MD, United States

4:06pm – Four Dimensional Printing of Smart Tissue

Constructs

Technical Presentation. IMECE2018-86412

Shida Miao, Haitao Cui, Se Jun Lee, Xuan Zhou, Lijie Grace

Zhang,

George Washington University, Washington, DC,

United States

4:27pm – A Pufferﬁsh-Inspired Ingestible Hydrogel Machine

Technical Presentation. IMECE2018-88955

Xinyue Liu, Shaoting Lin, Christoph Steiger, Xuanhe Zhao,

Massachusetts Institute of Technology, Cambridge, MA, United

States

4:48pm – A Novel Microlaser Based Plasmonic-Polymer

Hybrid Resonator

Technical Paper Publication. IMECE2018-86998

Maurizio Manzo, Ryan Schwend,

University of North Texas,

Denton, TX, United States

5:09pm – 3D Bioprinting of Thick Cardiac Constructs With

Perfusable Vessels

Technical Presentation. IMECE2018-86261

Lijie Grace Zhang, Haitao Cui,

George Washington University,

Washington, DC, United States,

Muhammad Mohiuddin,

University of Maryland, Baltimore, MD, United States

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

MONDAY, NOVEMBER 

160

11-8 MATERIAL PROCESSING OF FLEXIBLE

ELECTRONICS, SENSORS, AND DEVICES

11-8-3 Material Processing of Flexible Electronics,

Sensors, and Devices III

Third Floor, David L. Lawrence Convention Center, Room 330

3:45pm–5:30pm

Session Chair: Qiming Wang,

University of Southern

California, Los Angeles, CA, United States

Session Co-Chair: Yuris Dzenis,

University of Nebraska–

Lincoln, Lincoln, NE, United States

3:45pm – Flexible Beta-Ga2O3 High Power Electronics

Invited Presentation. IMECE2018-89204

Jung-Hun Seo,

University at Buffalo, State University of New

York, Buffalo, NY, United States

4:27pm – Printed Electronics From Low-Dimensional

Nanomaterials—Toward Low-Cost Transistors, Sensors,

and Energy Devices

Technical Presentation. IMECE2018-89991

Changyong Cao,

Michigan State University, East Lansing, MI,

United States

4:48pm – Stretchable Silver Nanowire Micro-Conductors by

Direct Inkjet Printing

Technical Presentation. IMECE2018-89251

Qijin Huang, Karam N. Al-Milaji, Hong Zhao,

Virginia

Commonwealth University, Richmond, VA, United States

5:09pm – Tunable Electrical Properties of Embossed,

Cellulose-Based Paper

Technical Presentation. IMECE2018-89695

Tongfen Liang, Xiyue Zou, Jiaqi Liu, Maame Assasie,

Wei-Jian Guo, Chuyang Chen, Jingjin Xie,

Max Tenorio,

Rutgers, The State University of New Jersey, Piscataway,

NJ, United States,

Assimina Pelegri,

Rutgers, The State

University of New Jersey, East Brunswick, NJ, United States,

Aaron Mazzeo,

Rutgers, The State University of New Jersey,

Piscataway, NJ, United States

11-9 MATERIALS PROCESSING AND

CHARACTERIZATION

11-9-1 Materials Processing and Characterization I

Third Floor, David L. Lawrence Convention Center, Room 320

3:45pm–5:30pm

Session Chair: Sridhar Santhanam,

Villanova University,

Collegeville, PA, United States

Session Co-Chair: Raghu Prakash,

Indian Institute of

Technology Madras, Chennai, India

3:45pm – Inﬂuence of Thermal Ratcheting on the Creep and

Mechanical Properties of High Density Polyethylene (HDPE)

Technical Paper Publication. IMECE2018-86043

Rahul Palaniappan Kanthabhabha Jeya, Abdel-Hakim

Bouzid,

École Technologie Superieure, Montreal, QC, Canada

4:06pm – Investigation of Process Parameters on Dry

Sliding Wear of Self-Lubricating Metal Matrix Composites

Technical Paper Publication. IMECE2018-86248

Senthil Kumar Velukkudi Santhanam,

College Of

Engineering, Guindy, Chennai, India,

Dhanashekar Manickam,

Karthikeyan S.,

Anna University, Chennai, Tamil Nadu, India

4:27pm – Effect of Micro (Banana) and Nano (SiC) Fillers on

Mechanical Behaviors of Basalt/Epoxy Hybrid Composites

Technical Paper Publication. IMECE2018-86268

Senthil Kumar Velukkudi Santhanam,

College of Engineering,

Guindy, Chennai, India,

Bharani Srikanth P., Prakash

Sampath, Mohan Bangaru,

Anna University, Chennai, India

4:48pm – Localized Fatigue Response Evaluation of Weld

Regions Through Cyclic Indentation Studies

Technical Paper Publication. IMECE2018-86420

Raghu Prakash,

Indian Institute of Technology Madras,

Chennai, India,

Krishna Madhavan,

SASTRA University,

Thanjavur, India,

Anirudh Prakash,

National Institute of

Technology Tiruchirappalli, Tiruchirappalli, India,

Pankaj

Dhaka,

Indian Institute of Technology Madras, Chennai,

Tamilnadu, Tamilnadu, India

5:09pm – Investigations on the Structure and Properties of

the Hot Extruded AA2014-Nano SiCp Composite

Technical Paper Publication. IMECE2018-87237

Karibeeran Shanmuga Sundaram, Raja Manickam S,

Ramaiyan Sankar,

Anna University, Chennai, Tamilnadu, India,

Dhanalakshmi Sathishkumar,

CVRDE, Chennai, Tamilnadu,

India

11-15 MULTIFUNCTIONAL

NANOMATERIALS

11-15-1 Multifunctional Nanomaterials 1

Third Floor, David L. Lawrence Convention Center, Room 321

3:45pm–5:30pm

Session Chair: Pei Dong,

George Mason University, Fairfax,

VA, United States

Session Co-Chair: Wei Gao,

University of Texas at San

Antonio, San Antonio, TX, United States

3:45pm – An Elastothermoviscoplasticity Anisotropic

Damage Model for Short Fiber Reinforced Polymer

Composites

Technical Paper Publication. IMECE2018-86286

Ge He, Yucheng Liu,

Mississippi State University, Mississippi

State, MS, United States,

Mark Horstemeyer, Douglas J.

Bammann,

Mississippi State University, Starkville, MS, United

States

4:06pm – Tailoring the Property of Nanocomposites Using

Nickel Coated Carbon Nanotube and Magnetic Field

Technical Presentation. IMECE2018-89727

Ahmed M. Abdalla, Rakesh Sahu, Ishwar K. Puri,

McMaster

University, Hamilton, ON, Canada

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

MONDAY, NOVEMBER 

161

4:27pm – Hybrid Nanomaterials and Their Applications in

Energy and Water Areas

Technical Presentation. IMECE2018-86585

Pei Dong,

George Mason University, Fairfax, VA, United

States,

Jun Lou,

Rice University, Houston, TX, United States

4:48pm – Functionalized Cellulose Nanocrystals for

Improving the Mechanical Properties of Poly(Lactic Acid)

Technical Paper Publication. IMECE2018-87691

Jamileh Shojaeiarani, Dilpreet Bajwa,

North Dakota State

University, Fargo, ND, United States

5:09pm – Phase Transition of Monolayer MoTe2: The Role

of Stress

Technical Presentation. IMECE2018-87969

Wei Gao,

University of Texas at San Antonio, San Antonio, TX,

United States

TUESDAY, NOVEMBER 13

11-23 PLENARY

11-23-1 Materials: Genetics to Structures Plenary I

Third Floor, David L. Lawrence Convention Center, Room 307

8:00am–8:45am

8:00am – Biological Materials and Mechanics: Challenges

and Opportunities

Plenary Presentation. IMECE2018-90108

Marc Meyers,

University of California San Diego, La Jolla, CA,

United States

11-23 PLENARY

11-23-2 Materials: Genetics to Structures Plenary II

Third Floor, David L. Lawrence Convention Center, Room 307

9:00am–9:45am

9:00am – The Future of Aerospace Materials: Challenges

and Opportunities

Plenary Presentation. IMECE2018-90109

Richard Vaia,

Air Force Research Labortory, Functional

Materials Division, WPAFB, OH, United States

11-8 MATERIAL PROCESSING OF FLEXIBLE

ELECTRONICS, SENSORS, AND DEVICES

11-8-4 Material Processing of Flexible Electronics,

Sensors, and Devices IV

Third Floor, David L. Lawrence Convention Center, Room 333

10:00am–11:45am

Session Chair: Yuris Dzenis,

University of Nebraska–Lincoln,

Lincoln, NE, United States

Session Co-Chair: Woon-Hong Yeo,

Georgia Institute of

Technology, Atlanta, GA, United States

10:00am – Large-Scale Hybrid Monolithic

Nanomanufacturing of Liquid-Solid Heterojunction Devices

for Self-Powered Smart Skin

Invited Presentation. IMECE2018-89581

Wenzhuo Wu,

Purdue University, West Lafayette, IN, United

States

10:42am – EGaIn–Metal Interfacing for Microelectronics

Integration in Liquid Metal-Based Stretchable Electronics

Technical Presentation. IMECE2018-89634

Kadri Bugra Ozutemiz, James Wissman, O. Burak

Ozdoganlar, Carmel Majidi,

Carnegie Mellon University,

Pittsburgh, PA, United States

11:03am – Molecular Conﬁguration of Solution-Processed

Interfaces Between Inorganic-Organic Hybrid Perovskite

and Electron Transport Layer

Technical Presentation. IMECE2018-88120

M.F.N. Tauﬁque,

Washington State University Pullm WA,

United States,

Samrat Choudhury,

University of Idaho,

Moscow, ID, United States,

Soumik Banerjee,

State University

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

MONDAY, NOVEMBER  / TUESDAY, NOVEMBER 

162

11:24am – Additive Manufacturing of Polymer

Nanocomposites With In Situ Strain Sensing Capability

Technical Paper Publication. IMECE2018-86263

Mohammad Abshirini, Mohammad Charara, Yingtao Liu,

Mrinal Saha, M. Cengiz Altan,

University of Oklahoma,

Norman, OK, United States

11-9 MATERIALS PROCESSING AND

CHARACTERIZATION

11-9-2 Materials Processing and Characterization II

Third Floor, David L. Lawrence Convention Center, Room 331

10:00am–11:45am

Session Chair: Patrick Brewick,

U.S. Naval Research

Laboratory, Washington, DC, United States

Session Co-Chair: Zahabul Islam,

Pennsylvania State

University, State College, PA, United States

10:00am – Low Temperature Annealing of Metals With

Electrical Wind Force Effects

Technical Presentation. IMECE2018-86350

Daudi Waryoba,

Pennsylvania State University, DuBois, PA,

United States,

Zahabul Islam, Baoming Wang,

Pennsylvania

State University, State College, PA, United States,

Md. Haque,

Pennsylvania State University, University Park, PA, United

States

10:21am – Inﬂuence of Ca-Ba and Sr Base Inoculants on

Metallurgical and Mechanical Properties of Grey and

Ductile Cast Irons

Technical Paper Publication. IMECE2018-86448

Dhruv Patel,

Aditya Silver Oak Institute of Technology,

Ahmedabad, India,

Devendra Parmar,

Silver Oak College of

Engineering and Technology, Rajkot, India,

Siddharthsinh

Jadeja,

Aditya Silver Oak Institute of Technology, Rajkot

Gujarat, India

10:42am – Modeling the Inﬂuence of Microstructure on

Stress Distributions and Concentrations in Pitting

Corrosion

Technical Paper Publication. IMECE2018-86465

Patrick Brewick, Andrew Geltmacher,

U.S. Naval Research

Laboratory, Washington, DC, United States,

Siddiq Qidwai,

National Science Foundation, Arlington, VA, United States

11:03am – Hardness Improvement of Binderless Boron

Nitride Composites Through Hybrid CO

Laser–Waterjet

Heat Treatment

Technical Presentation. IMECE2018-86740

Jingnan Zhao,

Tianjin University of Science and Technology,

Tianjin, China,

Pranav Shrotriya,

Iowa State University, Ames,

IA, United States,

Jian Guo, Xiaolei Ma,

Tianjin University of

Science and Technology, Tianjin, China

11:24am – Fatigue Crack Growth Rate Studies on Stainless

Steel Welds

Technical Paper Publication. IMECE2018-86915

Manuel Thomas, Raghu Prakash, Ganesh Sundararaman,

Indian Institute of Technology Madras, Chennai, Tamilnadu,

India,

Vasudevan Muthukumaran,

Indira Gandhi Centre for

Atomic Research, Kalpakkam, Tamilnadu, India

11-12 MECHANICS IN MANUFACTURING OF

MULTIFUNCTIONAL MATERIALS AND

STRUCTURES

11-12-1 Mechanics in Manufacturing of

Multifunctional Materials and Structures I

Third Floor, David L. Lawrence Convention Center, Room 334

10:00am–11:45am

Session Chair: Baoxing Xu,

University of Virginia,

Charlottesville, VA, United States

Session Co-Chair: Weiyi Lu,

Michigan State University,

East Lansing, MI, United States

10:00am – Material Interactions and Self-Assembly

Through a Dual-Droplet Inkjet Printing Process

Invited Presentation. IMECE2018-88766

Hong Zhao,

Virginia Commonwealth University, Richmond, VA,

United States

10:21am – Structurally Robust Thermal Insulating Coating

for Improving Building Energy Efﬁciency

Technical Presentation. IMECE2018-86599

Rui Kou, Ying Zhong, Meng Wang, Yu Qiao,

University of

California San Diego, La Jolla, CA, United States

10:42am – Scale-Up Processing and Testing of

Multifunctional Current Collector in Large Format Lithium-

Ion Battery Pouch Cells

echnical Presentation. IMECE2018-86107

Meng Wang, Yu Qiao,

University of California San Diego,

La Jolla, CA, United States

11:03am – Strain Engineering of 2D Materials: The Essential

Role of Interface

Technical Presentation. IMECE2018-89079

Zhaohe Dai,

University of Texas at Austin, Austin, TX, United

States

11:24am – Liquid Evaporation-Driven Self-Folding of

Free-Standing Graphene

Technical Presentation. IMECE2018-89109

Qingchang Liu,

University of Virginia, Charlottesville, VA,

United States

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

TUESDAY, NOVEMBER 

163

11-14 MULTIFUNCTIONAL COMPOSITE

MATERIALS AND STRUCTURES

11-14-4 Multifunctional Composite Materials and

Structures 4

Fourth Floor, David L. Lawrence Convention Center, Room 407

10:00am–11:45am

Session Chair: Jun Xu,

Beihang University, Beijing, China

Session Co-Chair: Sha Yin,

Beihang University, Beijing, China

10:00am – Effect of Nail Penetration Rate on Short Circuit

and Thermal Runaway Behavior of Lithium-Ion Battery

Technical Presentation. IMECE2018-87453

Zhiguo Hong, Sha Yin, Jun Xu,

Beihang University, Beijing,

China

10:21am – A Detailed Mechanical Model of 18650 Lithium-

Ion Battery

Technical Presentation. IMECE2018-89127

Lubing Wang, Jun Xu, Jia Yikai,

Beihang University, Beijing,

China

10:42am – Fabrication and Properties Characterization of

Composite Structural Electrolyte

Technical Presentation. IMECE2018-89945

Zihan Hu, Sha Yin, Huitia

n Wang, Haoyu Chen,

Beihang

University, Beijing, Beijing, China

11:03am – Flatwise Mechanical Behavior and Energy

Absorption of Tube Integrated Honeycombs

Technical Presentation. IMECE2018-89942

Yaobo Wu, Haoyu Chen, Huitian Wang, Sha Yin,

Beihang

University, Beijing, China

11:24am – Damping Characterization of Hierarchical

Composites

Technical Presentation. IMECE2018-89641

Suma Ayyagari, Marwan Al-Haik,

Embry-Riddle Aeronautical

University, Daytona Beach, FL, United States

11-9 MATERIALS PROCESSING AND

CHARACTERIZATION

11-9-3 Materials Processing and Characterization III

Third Floor, David L. Lawrence Convention Center, Room 331

1:45pm–3:30pm

Session Chair: Mauricio Cornejo,

Escuela Superior Politecnica

del Litoral, Guayaquil, Ecuador

Session Co-Chair: Frank J. Shih,

Seattle University, Seattle,

WA, United States

1:45pm – Anti-Corrosive Coating Using Recycled High

Density Polyethylene for Automotive Chassis

Technical Paper Publication. IMECE2018-86498

Joshua Bachert, Ahm Rahman, Ma’moun Abu-Ayyad,

Pennsylvania State Harrisburg, Middletwon, PA, United States

2:06pm – A Study on the Corrosion and Mechanical

Properties of an Al6063 Reinforced With Egg Shell Ash and

Rice Husk Ash

Technical Paper Publication. IMECE2018-86662

Nosa Idusuyi,

University of Ibadan, Ibandan, Oyo, Nigeria,

Peter Oviroh,

University of Johannesburg, Johannesburg,

South Africa,

Adetoye Henry Adekoya,

University of Ibadan,

Ibandan, Oyo, Nigeria

2:27pm – Assessment of Induced Delamination During

End-Milling of Natural Fiber Reinforced Composites:

A Statistical Analysis

Technical Paper Publication. IMECE2018-86978

Khalid Alzebdeh, Mahmoud Nassar, Nasr Al-Hinai,

Sultan

Qaboos University, Al-Khod, Oman

2:48pm – Effect of Calcium Hydroxide and Water to Solid

Ratio on Compressive Strength of Mordenite-Based

Geopolymer and the Evaluation of Its Thermal

Transmission Property

Technical Paper Publication. IMECE2018-87625

Mauricio Cornejo, Bolivar Togra, Haci Baykara, Guillermo

E. Soriano,

Cecilia Paredes,

Escuela Superior Politecnica del

Litoral, Guayaquil, Guayas, Ecuador,

Jan Elsen,

Katholieke

Universitiet Leuven, Leuven, Belgium

3:09pm – Recycling of Thermoplastic Waste in the Industry

Technical Presentation. IMECE2018-87979

Sadek Salem Cherif,

University of Sciences and Technology

of Oran Mohamed Boudiaf, Tizi-Ouzou, Algeria

11-10 BIOINSPIRED MATERIALS,

STRUCTURES AND APPLICATIONS

11-10-1 Bioinspired Composites and Structures

Third Floor, David L. Lawrence Convention Center, Room 333

1:45pm–3:30pm

Session Chair: Seyed Allameh,

Northern Kentucky University,

Highland Heights, KY, United States

Session Co-Chair: Zhenhai Xia,

University of North Texas,

Denton, TX, United States

1:45pm – Mechanical Properties of 3D Printed Biomimicked

Composites

Technical Paper Publication. IMECE2018-86309

Seyed Allameh,

Northern Kentucky University, Newport, KY,

United States,

Roger Miller, Hadi Allameh,

Northern Kentucky

University, Highland Heights, KY, United States

2:06pm – Bioinspired Materials for Water Vapor Harvesting

Technical Presentation. IMECE2018-86828

Yiyang Wan,

University of North Texas, Denton, TX, United

States,

Yong Gao,

Northwestern Polytechnical University,

Xi’an, Shannxi, China,

Zhenhai Xia,

University of North Texas,

Denton, TX, United States

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

TUESDAY, NOVEMBER 

164

2:27pm – Magnetically Actuated Dynamic Iridescence

Inspired by the Neon Tetra

Technical Presentation. IMECE2018-87100

Zhiren Luo,

North Carolina State University, Raleigh, NC,

United States,

Benjamin Evans,

Elon University, Elon, NC,

United States,

Chih-Hao Chang,

North Carolina State

University, Raleigh, NC, United States

2:48pm – Enhancing Light Transmission in Nacre-Inspired

Multilayer Composites Using Interfacial Nanostructures

Technical Presentation. IMECE2018-87506

Yi-An Chen, Chih-Hao Chang,

North Carolina State

University, Raleigh, NC, United States,

Sharan/S.V. Naidu,

GlobalFoundries, Raleigh, NC, United States,

Zhiren Luo,

North Carolina State University, Raleigh, NC, United States

11-12 MECHANICS IN MANUFACTURING OF

MULTIFUNCTIONAL MATERIALS AND

STRUCTURES

11-12-2 Mechanics in Manufacturing of

Multifunctional Materials and Structures II

Third Floor, David L. Lawrence Convention Center, Room 334

1:45pm–3:30pm

Session Chair: Weiyi Lu,

Michigan State University, East

Lansing, MI, United States

Session Co-Chair: Baoxing Xu,

University of Virginia,

Charlottesville, VA, United States

1:45pm – Micro- and Macro-Modeling and Applications of

Soft Magneto-Active Elastomers

Invited Presentation. IMECE2018-89993

Yin Liu, Changyong Cao,

Michigan State University, East

Lansing, MI, United States

2:06pm – Adhesion Tuning Through Embedded Pneumatic

Channels

Technical Presentation. IMECE2018-89897

oyi Luo,

University of Pennsylvania, Philadelphia, PA, United

States,

Amir M. Nasab,

University of Nevada, Reno, Reno, NV,

United States,

Wanliang Shan,

University of Nevada Reno,

Reno, NV, United States,

Kevin Turner,

University of

Pennsylvania, Philadelphia, PA, United States

2:27pm – Mechanics of Liquid-Assisted Mechanical Peeling

of 2D Materials

Technical Presentation. IMECE2018-89108

Yue Zhang,

University of Virginia, Charlottesville, VA, United

States

2:48pm – Perturbation Analysis of Surface Amorphous

Layer Fomation

Technical Presentation. IMECE2018-88854

Rahul Basu,

VTU, Bangalore, Ka, India

3:09pm – Analytical Investigation of the Stiffness of

Homogenous Isotropic Mechanical Materials With Different

Cross Sections

Technical Paper Publication. IMECE2018-86197

Michael Agarana,

Covenant University, Ota, Ogun State,

Nigeria,

Esther Akinlabi,

University of Johannesburg,

Johannesburg, Gauteng Province, South Africa

11-15 MULTIFUNCTIONAL

NANOMATERIALS

11-15-2 Multifunctional Nanomaterials 2

Fourth Floor, David L. Lawrence Convention Center, Room 407

1:45pm–3:30pm

Session Chair: Wei Gao,

University of Texas at San Antonio,

San Antonio, TX, United States

1:45pm – Application of Cellulose Nanocrystals and Zinc

Oxide as Green Fire Retardant in High Density Polyethylene

Technical Presentation. IMECE2018-88214

Ghazal Vahidi, Dilpreet Bajwa, Jamileh Shojaeiarani,

North

Dakota State University, Fargo, ND, United States

2:06pm – Investigating Effects of Graphene Nanoinclusions

for Improved Desalination Rates of Salt Water Under Solar

Heat

Technical Paper Publication. IMECE2018-88637

Vinay Patil, Aybala Usta, Muhammad Rahman, Ramazan

Asmatulu,

Wichita State University, Wichita, KS, United States

2:27pm – One-Step Flame Synthesis of W/Moly/N Doped

Titanium Dioxide Nanoparticles With Enhanced

Photocatalytic Activity

Technical Presentation. IMECE2018-89617

Yuqian Zhang, Zhizhong Dong, Gang Xiong, Stephen Tse,

Bernard Kear,

Rutgers, The State University of New Jersey,

Piscataway, NJ, United States

2:48pm – Designing Stiffness-Switching Thermoplastic

Nanocomposites for Wearable and Robotic Applications

Technical Presentation. IMECE2018-89671

Steven Rich, Carmel Majidi,

Carnegie Mellon University,

Pittsburgh, PA, United States

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

TUESDAY, NOVEMBER 

165

11-8 MATERIAL PROCESSING OF FLEXIBLE

ELECTRONICS, SENSORS, AND DEVICES

11-8-5 Material Processing of Flexible Electronics,

Sensors, and Devices V

Third Floor, David L. Lawrence Convention Center, Room 304

3:45pm–5:30pm

Session Chair: Woon-Hong Yeo,

Georgia Institute of

Technology, Atlanta, GA, United States

Session Co-Chair: Aaron Mazzeo,

Rutgers, The State

University of New Jersey, Piscataway, NJ, United States

3:45pm – A Highly Scalable Additive Printing Process for

High-Performance and Flexible Thermoelectric Materials

and Devices

Technical Presentation. IMECE2018-87747

Yanliang Zhang,

University of Notre Dame, Notre Dame, IN,

United States,

Tony Varghese,

Boise State University, Boise,

ID, United States,

Mortaza Saeidi-Javash,

University of Notre

Dame, Notre Dame, IN, United States

4:06pm – Processing of Surface Modiﬁed Barium Titanate

Flexible Nanocomposite Films

Technical Presentation. IMECE2018-90025

Kimberly Cook-Chennault,

Rutgers, The State University of

New Jersey, Piscataway, NJ, United States

4:27pm – Piezoelectric Polymer Thin Films With Architected

Cuts for Enhancing Flexibility and Ambient Wind Energy

Harvesting

Technical Presentation. IMECE2018-89034

Lichen Fang, Jing Li, Zeyu Zhu, Sung Kang,

Johns Hopkins

University, Baltimore, MD, United States

4:48pm – An Integrated Wearable Device based on Silver

Nanowire Nanocomposites

Technical Presentation. IMECE2018-89918

Shanshan Yao, Bryan Vogel, Yong Zhu,

North Carolina State

University, Raleigh, NC, United States

11-9 MATERIALS PROCESSING AND

CHARACTERIZATION

11-9-4 Materials Processing and Characterization IV

Third Floor, David L. Lawrence Convention Center, Room 331

3:45pm–5:30pm

Session Chair: Delm Soares,

University of Minho, Guimaraes,

Portugal

Session Co-Chair: Raghu Prakash,

Indian Institute of

Technology Madras, Chennai, India

3:45pm – Experimental Investigating the Impact of Ionic

Liquid on PET’s Properties

Technical Paper Publication. IMECE2018-86854

Waleed Ahmed,

United Arab Emirates University, Al Ain,

United Arab Emir.

4:06pm – Exploring the Use of Cinnamate Derivatives for

Bulk-Mediated Photo-Alignment of Liquid Crystal

Elastomers

Technical Presentation. IMECE2018-87111

Matthew L. Smith, Brian D. Simonich, Erik Johnsen,

Alyssa VanZanten,

Hope College, Holland, MI, United States

4:27pm – Effect of Constrained Groove Pressing on

Mechanical Properties of Nitinol Alloy

Technical Paper Publication. IMECE2018-87295

Shanthan Kumar Padisala, Akhil Bhardwaj, Kamal Poluri,

Amit Kumar Gupta,

BITS Pilani Hyderabad Campus,

Hyderabad, India

4:48pm – Inﬂuence of the Microstructure on the Creep

Behaviour of Tin-Silver-Copper Solder

Technical Paper Publication. IMECE2018-87789

Pedro Ribeiro, Delﬁm Soares,

University of Minho,

Guimarães, Portugal,

Maria Cerqueira,

Physics Department,

Braga, Portugal,

Senhorinha Teixeira, Daniel Barros, Jose

Teixeira, Pauline Capela,

University of Minho, Guimarães,

Portugal,

Francisco Macedo,

University of Minho, Braga,

Portugal

5:09pm – A Three-Dimensional Nested Reinforcing Mesh in

Elastomers for Crashworthy Applications

Technical Paper Publication. IMECE2018-88471

David J. Traina, Thomas C. Ekstrom, Owen F. Van

Valkenburgh, Jean-Paul R. Wallis, David S. Schulman,

Emily R. Mather, Nathan K. Yasuda, Frank J. Shih,

Seattle

University, Seattle, WA, United States

11-10 BIOINSPIRED MATERIALS,

STRUCTURES AND APPLICATIONS

11-10-2 Bioinspired Materials, Structures and

Applications

Third Floor, David L. Lawrence Convention Center, Room 333

3:45pm–5:30pm

Session Chair: Zhenhai Xia,

University of North Texas, Denton,

TX, United States

Session Co-Chair: Seyed Allameh,

Northern Kentucky

University, Newport, KY, United States

3:45pm – Fiber Reorientation Behavior of Functional

Graded Bouligand Architectures

Technical Presentation. IMECE2018-88222

Di Wang,

Purdue University, West Lafayette, IN, United

States,

Alireza Zaheri,

Northwestern University, Evanston, IL,

United States,

Benjamin Russell,

University of Cambridge,

Cambridge, United Kingdom,

Horacio Espinosa,

Northwestern University, Evanston, IL, United States,

Pablo Zavattieri,

Purdue University, West Lafayette, IN,

United States

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

TUESDAY, NOVEMBER 

166

4:06pm – Bioinspired Microstructures and Guided Crack

Propagation in Photopatterned Dual-Cure Polymer

Networks

Technical Presentation. IMECE2018-89354

Lewis Cox,

NIST, Boulder, CO, United States,

Adrienne

Blevins, Yifu Ding,

University of Colorado Boulder, Boulder,

CO, United States,

Jasper Drisko, Jason Killgore,

NIST,

Boulder, CO, United States

4:27pm – Tunable Thermal Transport and Reversible

Thermal Conductivity Switching in Topologically Networked

Bio-inspired Materials

Technical Presentation. IMECE2018-89795

John A. Tomko,

University of Virginia, Charlottesville, VA,

United States,

Abdon Pena-Francesch, Huihun Jung,

Pennsylvania State University, State College, PA, United

States,

Madhusudan Tyagi,

National Institute of Standards,

Gaithersburg, MD, United States,

Benjamin Allen,

Pennsylvania State University, State College, PA, United

States,

Melik Demirel,

Pennsylvania State University,

University Park, PA, United States,

Patrick E. Hopkins,

University of Virginia, Charlottesville, VA, United States

4:48pm – Seedcoat-Inspired Arcitectured Materials With

Sutural Tessellation

Technical Presentation. IMECE2018-90038

Yaning Li, Chao Gao, Benjamin Hasseldine,

University of

New Hampshire, Durham, NH, United States,

Ling Li,

University of Virginia, Blacksburg, VA, United States,

James Weaver,

Harvard University, Cambridge, MA, United

States

5:09pm – Experimental Analysis and Characterization of

Bioplastic Materials Reinforced With Nanoﬁbers and

Nanoparticles

Technical Presentation. IMECE2018-88857

Mohammad Asaduzzaman Chowdhury, Bengir Ahmed

Shuvho, Rajib Nandee, Uttam Kumar Debnath, Mohi Uddin

Ahmed,

Dhaka University of Engineering & Technology,

Gazipur, Bangladesh,

Suman Das,

University of

Saskatchewan, Saskatchewan, SK, Canada,

Md. Ruhul Amin,

Dhaka University of Engineering & Technology, Gazipur,

Bangladesh

11-14 MULTIFUNCTIONAL COMPOSITE

MATERIALS AND STRUCTURES

11-14-1 Multifunctional Composite Materials and

Structures 1

Third Floor, David L. Lawrence Convention Center, Room 334

3:45pm–5:30pm

Session Chair: Jun Xu,

Beihang University, Beijing, China

Session Co-Chair: Sha Yin,

Beihang University, Beijing, China

3:45pm – Stochastic Modeling of a High Speed Composite

Flywheel for Energy Storage

Technical Paper Publication. IMECE2018-86484

Matthew Riley,

Rose-Hulman Institute of Technology, Terre

Haute, IN, United States,

Justin Pettingill,

University of Idaho,

Moscow, ID, United States

4:06pm – Determination of Key Inﬂuencing Factors on

Thermal Conductivity Enhancement of Graphene Nano-

Platelets Reinforced Epoxy

Technical Paper Publication. IMECE2018-86847

Maximilian Rieger, Balakrishnan Nagarajan,

University of

Alberta, Edmonton, AB, Canada,

Mario Vollmer,

Technical

University of Munich, Garching, Germany,

Pierre Mertiny,

University of Alberta, Edmonton, AB, Canada

4:27pm – A Finite Element Study of the Impact of

Interphase on the Damping Properties of Polymer

Composites

Technical Presentation. IMECE2018-88066

Satyam Shukla, Shank S. Kulkarni, Alireza Tabarraei,

University of North Carolina at Charlotte, Charlotte, NC, United

States

4:48pm – Prediction of Gas Permeation in Polymeric

Materials Used in Oil and Gas Industry

Technical Paper Publication. IMECE2018-87211

Nooshin Nassr,

University of Oklahoma, Hackensack, NJ,

United States,

Zahed Siddique,

University of Oklahoma,

Norman, OK, United States

5:09pm – Numerical Analysis About Hierarchical Lattice

Materials With Different Constructions

Technical Presentation. IMECE2018-89155

Haoyu Chen, Sha Yin, Xiang Gao,

Beihang University, Beijing,

China

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

TUESDAY, NOVEMBER 

167

WEDNESDAY, NOVEMBER 14

11-9 MATERIALS PROCESSING AND

CHARACTERIZATION

11-9-5 Materials Processing and Characterization V

Third Floor, David L. Lawrence Convention Center, Room 334

10:00am–11:45am

Session Chair: Muhammad Rahman,

Wichita State University,

Wichita, KS, United States

Session Co-Chair: Philippe Geubelle,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States

10:00am – Advanced Recycled Materials for Economic

Production of Fire Resistant Fabrics

Technical Paper Publication. IMECE2018-88640

Tamseel Ahmed, Zaara Ali, Muhammad Rahman, Eylem

Asmatulu,

Wichita State University, Wichita, KS, United States

10:21am – Processing and Characterization of Filler Silicon

Carbide, Aluminum Oxide, and Titanium Oxide Particles on

Glass Fiber Hybrid Composite

Technical Presentation. IMECE2018-88852

Mohammad Asaduzzaman Chowdhury, Uttam Kumar

Debnath, Benjir Ahmed Shuvho, Rajib Nandee, Dhaka

University of Engineering and Technology, Gazipur, Gazipur,

Gazipur, Bangladesh,

Suman Das,

University of

Saskatchewan, Saskatchewan, SK, Canada,

Atiqur Rahman,

Bangladesh Road Transport Authority, Dhaka, Bangladesh

10:42am – Faster, Energy-Efﬁcient Manufacturing of Fiber-

Reinforced Composites Using Frontal Polymerization

Technical Presentation. IMECE2018-88994

Philippe Geubelle, Elyas Goli, Sagar Vyas,

University of

Illinois at Urbana-Champaign, Urbana, IL, United States

11:03am – Trade-off between Boron Doping and Stiffness,

Strength and Damage Tolerance of Graphene

Technical Presentation. IMECE2018-89089

Zhaohe Dai,

University of Texas at Austin, Austin, TX, United

States

11:24am – In Situ Characterization of Residual Stress and

Primary Creep in NiW Thin Films Using Wafer Curvature

Technical Presentation. IMECE2018-89821

Prince Singh, Ryan Pocratsky, Maarten P. De Boer,

Carnegie

Mellon University, Pittsburgh, PA, United States

11-14 MULTIFUNCTIONAL COMPOSITE

MATERIALS AND STRUCTURES

11-14-2 Multifunctional Composite Materials and

Structures 2

Third Floor, David L. Lawrence Convention Center, Room 335

10:00am–11:45am

Session Chair: Akio Yonezu,

Chuo University, Tokyo, Japan

Session Co-Chair: Jun Xu,

Beihang University, Beijing, China

10:00am – Effect of Porous Structure on Tensile

Deformation of Porous Polymer Membranes: FEM

Computations of Periodic and Random Pore Structures

Technical Presentation. IMECE2018-86656

Kanako Emori, Yoshiki Nishiyama, Takumi Nagakura,

Akio Yonezu,

Chuo University, Tokyo, Japan

10:21am – Deformation Modeling of Porous Polymer

Materials With 3D Random Pore Structure

Technical Presentation. IMECE2018-86492

Hiroshi Kishida, Shugo Fushimi, Takumi Nagakura,

Kanako Emori, Akio Yonezu,

Chuo University, Tokyo, Japan

10:42am – Anisotropic Deformation Behavior of Polymeric

Microﬁltration Membranes: Experiment and FEM Modeling

Technical Presentation. IMECE2018-86655

Takumi Nagakura, Kanako Emori, Hiroshi Kishida,

Akio Yonezu,

Chuo University, Tokyo, Japan

11:03am – Bonding Strength Evaluation of Al Alloy and

Epoxy Resin by Using Laser Induced Ultrasonic Wave

Technical Presentation. IMECE2018-86658

Yusaku Saito, Takeshi Yamada, Akio Yonezu,

Chuo University, Tokyo, Japan

11:24am – Nano Surface Adhesion and Deformation

Behaviors of Polymer Blend Membranes for Water

Puriﬁcation by Using Atomic Force Microscopy

Technical Presentation. IMECE2018-87302

Kazunori Miyamoto, Daiki Ikeshima, Kenji Furuya,

Hiroshi Yamamura, Akio Yonezu,

Chuo University, Tokyo,

Japan

11-18 PHASE TRANSFORMATIONS IN

MATERIALS PROCESSING

11-18-1 Phase Transformations in Materials

Processing I: Additive Manufacturing

Third Floor, David L. Lawrence Convention Center, Room 336

10:00am–11:45am

Session Chair: Mohsen Asle Zaeem,

Colorado School of

Mines, Golden, CO, United States

10:00am – Additive Manufacturing, 3D Printing, Porosity

and Synchrotron Experiments

Invited Presentation. IMECE2018-86665

Anthony Rollett,

Carnegie Mellon University, Pittsburgh, PA,

United States

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

WEDNESDAY, NOVEMBER 

168

10:21am – An Overview of Additive Manufacturing of

Functional Magnetic Shape Memory Alloys and

Metamagnetic Materials With Magnetocaloric Properties

Invited Presentation. IMECE2018-88140

Markus Chmielus, Jakub Toman, Amir Mostafaei, Erica

Stevens, Katerina A. Kimes,

University of Pittsburgh,

Pittsburgh, PA, United States

10:42am – Optimizing Additively-Manufactured Inconel 625

for Reliable Mechanical Properties and Corrosion

Resistance

Invited Presentation. IMECE2018-88848

Mark Stoudt, Richard Ricker, Eric Lass,

National Institute of

Standards and Technology, Gaithersburg, MD, MD, United

States

11:03am – Nano-Scale Spatiotemporal Resolution

Transmission Electron Microscopy of Multicomponent Alloy

Microstructure Evolution During Rapid Thermal Transients

Invited Presentation. IMECE2018-86718

Jorg Wiezorek,

University of Pittsburgh, Pittsburgh, PA, United

States,

Joseph McKeown,

Lawrence Livermore National

Laboratory, Livermore, CA, United States,

Vishwanadh

Bathula,

University of Pittsburgh, Pittsburgh, PA, United States

11:24am – Binder Jet 3D Printing of Metamagnetic

Ni-Mn-Based Alloys for Magnetocaloric Applications

Technical Presentation. IMECE2018-88204

Erica Stevens, Katerina A. Kimes, Aaron Acier

no, Rafael

Rodriguez, Amir Mostafaei, Markus Chmielus,

University of

Pittsburgh, Pittsburgh, PA, United States

11-9 MATERIALS PROCESSING AND

CHARACTERIZATION

11-9-6 Materials Processing and Characterization VI

Third Floor, David L. Lawrence Convention Center, Room 334

1:45pm–3:30pm

Session Chair: Raghu Prakash,

Indian Institute of Technology

Madras, Chennai, India

Session Co-Chair: Nicholas J. Morris,

UES, Inc./AFRL,

Dayton, OH, United States

1:45pm – PH level of Pore Solution in Alkali Activated

Fly-Ash Geopolymer Concrete and Its Effect on ASR of

Aggregates With Wide Silicate Contents

Technical Presentation. IMECE2018-89053

Shree Paudel, Mijia Yang,

North Dakota State University,

Fargo, ND, United States

2:06pm – Inﬂuence of Steel Fiber on Mechanical Properties

of Elevated Temperature Cured Fly-Ash Based Geopolymer

Mortar

Technical Presentation. IMECE2018-89054

Shree Paudel, Mijia Yang,

North Dakota State University,

Fargo, ND, United States

2:27pm – Correlating Chemistry and Mechanics to Design

Liquid Metal Nanoparticles for Self-Healing Electronics

Technical Presentation. IMECE2018-89549

Nicholas J. Morris, Zachary J. Farrell,

UES, Inc./AFRL,

Dayton, OH, United States,

Christopher E. Tabor,

Air Force

Research Laboratory, WPAFB, OH, United States

2:48pm – Scalable Manufacturing Routes to Develop Boron

Nitride Nanotubes Based Metal Matrix Composites

Technical Presentation. IMECE2018-89722

Pranjal Nautiyal, Benjamin Boesl, Arvind Agarwal,

Florida

International University, Miami, FL, United States

3:09pm – Assessing Interlayer Adhesion Degradation in

Photovoltaic Backsheets Using the Single Cantilever Beam

Test

Technical Presentation. IMECE2018-89668

Scott Julien,

Northeastern University, Boston, MA, United

States,

Xiaohong Gu, Jae Hyun Kim,

National Institute of

Standards and Technology, Gaithersburg, MD, United States,

Kai Tak Wan,

Northeastern University, Boston, MA, United

States

11-14 MULTIFUNCTIONAL COMPOSITE

MATERIALS AND STRUCTURES

11-14-3 Multifunctional Composite Materials and

Structures 3

Third Floor, David L. Lawrence Convention Center, Room 335

1:45pm–3:30pm

Session Chair: Sha Yin,

Beihang University, Beijing, China

Session Co-Chair: Akio Yonezu,

Chuo University, Tokyo,

Japan

1:45pm – Thermal Resistance of Polystyrene-Seeded

Concrete for Better Insulative Value

Technical Paper Publication. IMECE2018-88661

Chris Kobus, Michael Huyssen, Ryan Piper, J. David Schall,

Oakland University, Rochester, MI, United States,

Laila

Guessous,

Oakland University, Bloomeld, MI, United States,

Xia Wang,

Oakland University, Rochester, MI, United States

2:06pm – Ordered Carbon Nanotube-Polymer Composites

From Lyotropic Liquid Crystal Templating

Technical Presentation. IMECE2018-89476

Shanju Zhang,

Cal Poly, San Luis Obispo, CA, United States

2:27pm – Mechanical and Morphological Properties of

Nickel-Plated Luffa Sponge

Technical Presentation. IMECE2018-89946

Huitian Wang, Haoyu Chen, Zihan Hu, Yaobo Wu, Sha Yin,

Beihang University, Beijing, China

2:48pm – Investigating the Mechanical Behaviour of Al6063

Stir Cast With Coconut Husk

Technical Presentation. IMECE2018-88953

Patrick Adebisi Olusegun Adegbuyi,

Lagos State University

Lagos, Lagos, Nigeria

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

WEDNESDAY, NOVEMBER 

169

3:09pm – Micromechanical Modeling of Nonlinear

Responses of Active Woven Composites

Technical Presentation. IMECE2018-88354

Wen-chen Lin, Chien-hong Lin,

National Cheng Kung

University, Tainan, Taiwan

11-18 PHASE TRANSFORMATIONS IN

MATERIALS PROCESSING

11-18-2 Phase Transformations in Materials

Processing II: Microstructures and Properties

Third Floor, David L. Lawrence Convention Center, Room 336

1:45pm–3:30pm

Session Chair: Mohsen Asle Zaeem,

Colorado School of

Mines, Golden, CO, United States

Session Co-Chair: Siddhartha Pathak,

University of Nevada,

Reno, Reno, NV, United States

1:45pm – New Insights Into Metallic Alloy Microstructural

Evolution by In Situ Characterization

Invited Presentation. IMECE2018-88880

Amy Clarke,

Colorado School of Mines, Golden, CO, United

States

2:06pm – Structure and Properties of bcc Mg Synthesized

Using Interface Strain Engineering

Invited Presentation. IMECE2018-88968

Siddhartha Pathak, Manish Jain,

University of Nevada, Reno,

Reno, NV, United States,

Marko Knezevic,

University of New

Hampshire, Durham, NH, United States,

Nenad Velisavljevic,

Los Alamos National Laboratory, Los Alamos, NM, United

States,

Nathan Mara,

University of Minnesota, Minneapolis,

MN, United States,

Irene Beyerlein,

University of California,

Santa Barbara, Santa Barbara, CA, United States

2:27pm – Understanding Nucleation Phenomena and Phase

Formation in Rapid Solidiﬁcation of Al and Al-Cu Alloys

Technical Presentation. IMECE2018-88934

Avik Mahata,

Missouri S&T, Rolla, MO, United States,

Michael Baskes,

University of California, San Diego, La Jolla,

CA, United States,

Mohsen Asle Zaeem,

Colorado School of

Mines, Golden, CO, United States

2:48pm – Effect of Non-Equilibrium Cooling on Phase

Transformations and Morphology of Second Phases in

Al-Rich Al-Cu Alloys

Technical Presentation. IMECE2018-87574

Vishwanadh Bathula, Subarna Khanal, Jorg Wiezorek,

University of Pittsburgh, Pittsburgh, PA, United States

3:09pm – A Comparative Assessment of the Structural,

Elastic and Electronic Properties of Nb3Pt and NbPt3

Phases Through First-Principles Study

Technical Paper Publication. IMECE2018-86911

Romeo Sephyrin Fono-Tamo, Tien-Chien Jen,

University of

Johannesburg, Johannesburg, South Africa,

Oliver Bhila,

University of South Africa, Johannesburg, Gauteng, South

Africa

11-6 NANOENGINEERED, HIERARCHICAL,

MULTI-SCALE MATERIALS AND

STRUCTURES

11-6-1 Nanoengineered, Hierarchical, Multi-Scale

Materials and Structures

Third Floor, David L. Lawrence Convention Center, Room 336

3:45pm–5:30pm

Session Chair: Ram Mohan,

North Carolina A&T University,

Greensboro, NC, United States

3:45pm – Integrating an Analytical Uncertainty

Quantiﬁcation Approach to Multi-Scale Modeling of

Nanocomposites

Technical Paper Publication. IMECE2018-86227

Pinar Acar,

Virginia Tech, Blacksburg, VA, United States

4:06pm – Simulation of Liquid Crystal Polymer

Directionality During Cast Film Extrusion

Technical Paper Publication. IMECE2018-86855

Anthony Sullivan, Anil Saigal, Michael Zimmerman,

Tufts University, Medford, MA, United States

4:27pm – Hydrostatic Compression Constitutive Material

Modeling of Two-Phase Cement Paste Composite Material

Chemistry Structures

Technical Presentation. IMECE2018-89136

Ingrid Padilla Espinosa, Ram Mohan,

North Carolina A&T

University, Greensboro, NC, United States,

Wayne Hodo,

U.S. Army - ERDC, Vicksburg, MS, United States,

John Rivas

Murillo,

North Carolina A&T State University, Greensboro, NC,

United States

4:48pm – Multiscale Finite Element Modeling of Ultra-High

Performance Concrete

Technical Presentation. IMECE2018-89167

K.E. Bryan, Y. Hammi,

Mississippi State University, Starkville,

MS, United States,

M.Q. Chandler,

USACE-ERDC, Vicksburg,

MS, United States,

R.D. Moser,

U.S. Army Engineer Research

and Development Center, Vicksburg, MS, United States,

M.N. Burcham,

Mississippi State University, Huntsville, AL,

United States,

D. Scott,

U.S. Army Research and Development

Center, Vicksburg, MS, United States,

T.W. Stone,

Mark Horstemeyer,

Mississippi State University, Starkville,

MS, United States

5:09pm – 3D Graphene Foam for Engineering Advanced

Composites and Metamaterials

Technical Presentation. IMECE2018-89688

Pranjal Nautiyal, Benjamin Boesl, Arvind Agarwal,

Florida

International University, Miami, FL, United States

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

WEDNESDAY, NOVEMBER 

170

11-13 MULTIPHYSICS AND MULTISCALE

MODELING OF LITHIUM-ION BATTERIES

11-13-1 Multiphysics and Multiscale Modeling of

Lithium-Ion Batteries

Third Floor, David L. Lawrence Convention Center, Room 334

3:45pm–5:30pm

Session Chair: Jun Xu, Beihang

University, Beijing, China

Session Co-Chair: Binghe Liu,

Beijing University of

Aeronautics and Astronautics, Beijing, China

3:45pm – A Detailed Mechanical Model of Lithium-Ion

Pouch Batteries

Technical Presentation. IMECE2018-89465

Juner Zhu,

Massachusetts Institute of Technology, Cambridge,

MA, United States,

Wei Li,

Tsinghua University, Beijing, Beijing,

China,

Tomasz Wierzbicki,

Massachusetts Institute of

Technology, Cambridge, MA, United States

4:06pm – Multiphysics Modeling of 18650 Battery Under

Mechanical Loading

Technical Presentation. IMECE2018-89129

Chunhao Yuan, Jun Xu, Lubing Wang,

Beihang University,

Beijing, China

4:27pm – Assessing Battery Safety Using a Combined

Simulation Approach From Cell to Vehicle Level

Technical Presentation. IMECE2018-89190

Bernhard Brunnsteiner,

AVL, Graz, Austria

4:48pm – State-of-Charge Dependence of Mechanical

Response of Lithium-Ion Batteries: A Result of Internal

Stress

Technical Presentation. IMECE2018-89392

Wei Li,

Xia Yong,

Tsinghua University, Beijing, Beijing, China,

Juner Zhu,

Massachusetts Institute of Technology, Cambridge,

MA, United States,

Hailing Luo,

Tsinghua University, Beijing,

China

5:09pm – A Multiscale and Multiphysics Model for Lithium-

Ion Full Cells With Silicon-Containing Anodes

Technical Presentation. IMECE2018-89125

Binghe Liu,

Beijing University of Aeronautics and Astronautics,

Beijing, China,

Jun Xu,

Beihang University, Beijing, China,

Hanqing Jiang,

Arizona State University, Tempe, AZ, United

States

11-20 RECENT DEVELOPMENTS IN

TRIBOLOGY

11-20-1 Recent Developments in Tribology

Third Floor, David L. Lawrence Convention Center, Room 335

3:45pm–5:30pm

Session Chair: Patricia Iglesias,

Rochester Institute of

Technology, Rochester, NY, United States

Session Co-Chair: Hong Guo,

Rochester Institute of

Technology, Rochester, NY, United States

3:45pm – The Effects of Single-Walled Carbon Nanotubes

and Ionic Liquids in Reduction of Friction and Wear

Technical Paper Publication. IMECE2018-86703

Hong Guo, John Ackerman, Steven Keil, Ivan Puchades,

Brian Landi, Patricia Iglesias,

Rochester Institute of

Technology, Rochester, NY, United States

4:06pm – Effect of Carbon Nanotube-Phosphinate Ionic

Liquid Thin Boundary Layer on the Tribological Behavior of

Aluminum Alloy in Steel-on-Aluminum Contact

Technical Paper Publication. IMECE2018-86875

Miguel Gutierrez, Michael Gydesen, Caitlin Marcellus,

Ivan Puchades, Brian Landi, Patricia Iglesias,

Rochester

Institute of Technology, Rochester, NY, United States

4:27pm – Estimation of Energy Conservation in Internal

Combustion Engine Vehicles Using Ionic Liquid as an

Additive

Technical Paper Publication. IMECE2018-87002

Sameer A. Magar, Hong Guo, Patricia Iglesias,

Rochester

Institute of Technology, Rochester, NY, United States

4:48pm – Surface Characterization of Trim Dies and

Trimmed Edges in Sheet Metal Shearing

Technical Presentation. IMECE2018-89542

Xin Wu, Ameer Al-Shawk,

Wayne State University, Detroit, MI,

United States

5:09pm – Ionic Liquids as Additives of Cutting Fluids to

Reduce Machine Tool Friction and Wear

Technical Paper Publication. IMECE2018-86810

Patricia Iglesias, Christopher Ferri, Sydney Lizarazo,

Michael Troise,

Rochester Institute of Technology, Rochester,

NY, United States

TRACK  MATERIALS: GENETICS TO STRUCTURES

–

WEDNESDAY, NOVEMBER 

171

NOTES

172

12-1-1: Mechanics of Soft Materials: Structure

12-1-2: Mechanics of Soft Materials: Gels/Active

Materials 1

12-1-3: Mechanics of Soft Materials: Gels/Active

Materials 2

12-1-4: Mechanics of Soft Materials: Constitutive

Modeling

12-1-5: Mechanics of Soft Materials: Bioinspiration and

Biomimetics

12-1-6: Mechanics of Soft Materials:

Electro/magneto/Chemo-Mechanics

12-1-7

: Mechanics of Soft Materials: Characterization

12-1-8: Mechanics of Soft Materials: Fracture,

Dissipation, and Self-Healing

12-2-1: 3D Printing of Novel Materials

12-2-2: Mechanics of 3D Printed Materials

12-3-1: Mechanical Characterization in Extreme

Environments I

12-3-2: Mechanical Characterization in Extreme

Environments II

12-3-3: Mechanical Characterization in Extreme

Environments III

12-4

-1: Mechanics of Adhesion and Friction

12-4-2: Mechanics of Adhesion and Friction

12-4-3: Mechanics of Adhesion and Friction

12-5-1: Quantitative Visualization Related to Fracture &

Crack Growth Processes

12-6-1: In-Situ Techniques in Experimental Mechanics

12-7-1: Multiscale Models and Experimental Techniques

for Co

osite Materials and Structures

12-7-2: Multiscale Models and Experimental Techniques

for Composite Materials and Structures

12-7-3: Multiscale Models and Experimental Techniques

for Composite Materials and Structures

12-8-1: Multi-Scale Computations in Fluids, Structures,

and Materials 1

12-8-2: Multi-Scale Computations in Fluids, Structures,

and Materials 2

12-8-3: Multi-Scale Computations in Fluids, Structures,

and Materials 3

12-10-1: Modeling and Experiments in Nanomechanics

and Nanomaterials 1

12-10-2; Modeling and Experiments in Nanomechanics

and Nanomaterials 2

12-10-3: Modeling and Experiments in Nanomechanics

and Nanomaterials 3

12-10-4: Modeling and Experiments in Nanomechanics

and Nanomaterials 4

12-12-1: Mechanics of Thin-Film and Multi-Layer

Structures

12-12-2: Mechanics of Thin

-Film and Multi-Layer

Structures

12-12-3: Mechanics of Thin-Film and Multi-Layer

Structures

12-12-4: Mechanics of Thin-Film and Multi-Layer

Structures

12-13-1: Recent Advances and Applications in Meshfree

and Particle Methods

12-13-2: Recent Adv

ances and Applications in Meshfree

d Particle Methods

12-14-1: Plastic Anisotropy Modeling

12-14-2: Multi-Scale Modelling of Plastic Anisotropy

12-14-3: Numerical Modeling with Applications to

Forming

12-14-4: Experimental and Theoretical Models for

Anisotropic Plasticity and Fracture

12-15-1: Inaugural Symposium on the Constitutive

Modeling of the Mechanical Beha

vior and

Performance of Electronic, Photonic, MEMS, and

NEMS Materials, Assemblies, Packages, Modules,

and Systems

12-16-1: Multiscale Modeling and Experimentation of

Geomaterials

12-16-2: Multiscale Modeling and Experimentation of

Geomaterials

12-17-1: Failure and Fracture of Additively Manufactured

Materials and Structures – 1

12-17-2: Failure and Fracture of Additively Manufactured

Materials and Struc

tures – 2

12-18-1: Computational Modeling of Extreme Events

12-18-2: Computational Modeling of Extreme Events

12-19-1: Computational Fluid-Structure Interaction

12-19-2: Computational Fluid-Structure Interaction

12-19-3: Computational Fluid-Structure Interaction

12-19-4: Computational Fluid-Structure Interaction

12-20-1: Multiscale Mechanics of Ductile Failure

12-20-2: Multiscale Mechanics of Ductile Failure

12-21-1: Fatigue Modeling in Engineering Materials

12-21-2: Fatigue Modeling in Engineering Materials

12-21-3: Material Model and Fracture Theory Development

12-21-4: Meso-Scale Modeling and Material Fracture

Characterization

12-21-

5: Uncertainty Modeling in Fracture and Fatigue

12-22-1: Deformation and Failure of Multifunctional

Materials

12-22-2: Deformation and Failure of Multifunctional

Materials

12-25-1: Mechanics and Design of Cellular Materials

12-25-2: Mechanics and Design of Cellular Materials

12-26-1: Mechanics of Soft Materials and Soft Robots

12-26-2: Mechanics of Soft Materials and Soft Robots

12-26-3: Mechanics of Soft Materials and Soft Robots

12-26-4: Mechanics of Soft Materials and Soft Robots

12-26-5: Mechanics of Soft Materials and Soft Robots

12-27-1: Multifunctional and Micro/Nano-Structured

Materials: Modeling and Characterization (I)

12-27-2: Multifunctional and

Micro/Nano-Structured

Materials: Modeling and Characterization (II)

12-27-3: Multifunctional and Micro/Nano-Structured

Materials: Modeling and Characterization (III)

12-27-4: Multifunctional and Micro/Nano-Structured

Materials: Modeling and Characterization (IV)

12-28-1: Instabilities in Solids and Structures: Mechanics

of Slender Solids

12-28-2: Instabilities in So

lids and Structures: Numerical/

Analytical Stability

12-28-3: Instabilties in Solids and Structures: Active and

Soft Materials

12-28-4: Instabilities in Solids and Structures: Stability of

Composites, Foams/Open-Cell Materials

12-28-5: Instabilities in Solids and Structures: Phase

Transformations/Transitions and Multi-Stability

12-29-1: Peridynamic Modelling and Analysis

12-29-2: Peridynamics for Composites, Fracture, and

Corrosion Damage

12-30-1: Symposium on Multiphyics Simulations and

Experiments for Solids

12-30-2: Symposium on Multiphyics Simulations and

Experiments for Solids

12-31-1: Design of Mechanical Metamaterials

12-31-2: Functionality of Mechanical Metamaterials

12-31-3: Mechanics of Mechanical Metamaterials

12-31-4: Recongurable Mechanical Metamaterials

12-32-1: High-Performance Nanostructural Materials and

Nanocomposites

12-33-1: Congress-Wide Symp

osium on NDE &SHM –

Nondestructive Characterization of Solids,

Structures and Fluids

12-35-1: Congress-Wide Symposium on NDE &SHM –

Active and Passive Health Monitoring of

Structures

12-36-1: Keynote Lectures on Computational Mechanics –

12-38-1: Young Medalist Symposium

12-38-2: Young Medalist Symposium

12-39-1: Drucker Medal Symposium

12-39-2: Drucker Medal Symposium

12-39-3:

Drucker Med

al Symposium

12-40-1: Mechanics of Solids, Structures and Fluids

Plenary I

12-40-2: Mechanics of Solids, Structures and Fluids

Plenary II

12-41-1: Dynamic Failure of Materials and Structures

12-41-2: Dyn

amic Failure of Materials and Structures

Track Organizers

Yuri Bazilevs,

University of California, San Diego,

United States

Pradeep Guduru,

Brown University, United States

Topic Organizers

Shawn Chester,

New Jersey Institute of Technology,

United States

Shengqiang Cai,

UC San Diego, United States

Qiming Wang,

University of Southern California,

United States

Howon Lee,

Rutgers University, United States

Qiming Wang,

University of Southern California,

United States

Kai Yu,

University of Colorado – Denver, United

States

Ryan Berke,

Utah State University, United States

Natasha Vermaak,

Lehigh University, United States

Owen Kingstedt,

University of Utah, United States

Jianliang Xiao,

University of Colorado Boulder,

United States

Chenglin Wu,

Missouri University of Science and

Technology, United States

Brian Bush,

National Institute of Standards and

Technology, United States

Leslie Lamberson,

Drexel University, United States

Ali Ghahremaninezhad,

University of Miami, United

States

Charles Wojnar,

Missouri S&T, United States

Dianyun Zhang,

University of Connecticut, United

States

Caglar Oskay,

Vanderbilt University, United States

Evan Pineda,

NASA Glenn Research Center, United

States

Yozo Mikata,

Bechtel, United States

Jeffrey Kysar,

Columbia University, United States

Shuodao Wang,

Oklahoma State University, United

States

Huanyu (Larry) Cheng,

Pennsylvania State University,

United States

Jizhou Song,

Zhejiang University, China

Sheng-Wei Chi,

University of Illinois at Chicago,

United States

Jiun-Shyan Chen,

University of California, San

Diego, United States

Michael Hillman,

Pennsylvania State University,

United States

C.T. Wu,

LSTC, United States

Oana Cazacu,

University of Florida, United States

H. Eliot Fang,

Sandia National Laboratories, United

States

Martin Ostoja-Starzewski,

University of Illinois

Urbana, United States

Ephraim Suhir,

Portland State University, United

States

Abhijit Dasgupta,

CALCE, University of Maryland,

United States

M.Q. Chandler,

USACE-ERDC, United States

Jesse Sherburn,

US Army Engineer Research and

Development Center, United States

Paul Allison,

University of Alabama, United States

Ashfaq Adnan,

University of Texas Arlington, United

States

Jason Roth,

U.S. Army - ERDC, United States

Joe Bishop,

Sandia National Labs, United States

Artem Korobenko,

University of Calgary, Canada

Ming-Chen Hsu,

Iowa State University, United States

Kenji Takizawa,

Waseda University, Japan

Tayfun Tezduyar,

Rice University, United States

Justin Wilkerson,

Texas A&M University, United

States

Ankit Srivastava,

Texas A&M University, United

States

Shailendra Joshi,

University of Houston, United

States

Huijuan Zhao,

Clemson University, United States

Gang Li,

Clemson University, United States

Qingda Yang,

University of Miami, United States

Mohsen Asle Zaeem,

Colorado School of Mines,

United States

Theocharis Baxevanis,

University of Houston, United

States

Dimitris Lagoudas,

Texas A&M University, United

States

Ibrahim Karaman,

TexasA&MUniversity, United

States

Charles Wojnar,

Missouri S&T, United States

Russell Mailen,

Auburn University, United States

Muhammad Ali,

Ohio University, United States

Huanyu (Larry) Cheng,

Pennsylvania State University,

United States

Shaoxing Qu,

Zhejiang University, Zhejiang, China

Tiefeng Li,

Zhejiang University, China

Xin-Lin Gao,

Southern Methodist University, United

States

Vinu Unnikrishnan,

University of Alabama, United

States

Haifeng Zhao,

Chinese Academy of Sciences, China

Ryan Elliott,

University of Minnesota, United States

Edmundo Corona,

Sandia National Laboratories,

United States

Dai Okumura,

Osaka University, Japan

Kostas Danas,

LMS, CNRS, Ecole Polytechnique,

France

Florin Bobaru,

University of Nebraska-Lincoln,

United States

Ibrahim Guven,

Virginia Commonwealth University,

United States

Erdogan Madenci,

University of Arizona, United

States

Pablo Seleson,

Oak Ridge National Laboratory,

United States

Stewart Silling,

Sandia National Lab, United States

Qian Qian,

University of Texas at Dallas, United

States

Hanqing Jiang,

Arizona State University, United

States

Harold Park,

Boston University, United States

Gang Li,

Clemson University, United States

Xianqiao Wang,

University of Georgia, United States

Jongmin Shim,

University at Buffalo, United States

Lifeng Wang,

Stony Brook University, United States

Jie Yin,

Temple University, United States

Yaning Li,

University of New Hampshire, United

States

Sung Kang,

Johns Hopkins University, United States

Eduard Karpov,

University of Illinois at Chicago,

United States

Jaehyung Ju,

Shanghai Jiao Tong University, China

Yuris Dzenis,

University of Nebraska, United States

Dimitry Papkov,

University of Nebraska-Lincoln,

United States

Mohammad Naraghi,

Texas A & M University, United

States

Sourav Banerjee,

University of South Carolina,

United States

Andrei Zagrai,

New Mexico Institute of Mining &

Technology, United States

Yanfeng Shen,

Shanghai Jiao Tong University, China

Sridhar Santhanam,

Villanova University, United

States

Tribikram Kundu,

University of Arizona, United States

Scott Bland,

NextGen Aeronautics, United States

Qian Qian,

University of Texas at Dallas, United

States

Ashfaq Adnan,

University of Texas Arlington, United

States

Caglar Oskay,

Vanderbilt University, United States

L. Roy Xu,

University of New Mexico, United States

Jun Xu,

Beihang University, China

Session Organizers

Shengqiang Cai,

UC San Diego, United States

Shawn Chester,

New Jersey Institute of Technology,

United States

Qiming Wang,

University of Southern California,

United States

Sung Kang,

Johns Hopkins University, United States

Robert L. Lowe,

University of Dayton, United States

Aurelie Azoug,

Oklahoma State University, United

States

Kai Yu,

University of Colorado – Denver, United

States

Owen Kingstedt,

University of Utah, United States

Natasha Vermaak,

Lehigh University, United States

Ryan Berke,

Utah State University, United States

Jianliang Xiao,

University of Colorado Boulder,

United States

Glaucio Paulino,

University of Illinois, United States

Karel Matouš,

University of Notre Dame, United

States

Huijuan Zhao,

Clemson University, United States

Ahmad Naja,

Drexel University, United States

Jeffrey Kysar,

Columbia University, United States

Scott Price,

G E Research Center, United States

Changhong Ke,

State University of NY, United States

Yingchao Yang,

University of Maine, United States

George Voyiadjis,

Louisiana State University, United

States

Tarek Ragab,

Arkansas State University, United

States

Yashashree Kulkarni,

University of Houston, United

States

Shuodao Wang,

Oklahoma State University

, United

States

Sheng-Wei Chi,

University of Illinois at Chicago,

United States

Pablo Seleson,

Oak Ridge National Laboratory,

United States

C.T. Wu,

LSTC, United States

Michael Hillman,

Pennsylvania State University,

United States

William Scherzinger,

Sandia National Laboratories,

United States

Brian Lester,

Sandia National Laboratories, United

States

Nitin Chandola, U

niversity of Florida, United States

William Lawrimore,

US Army Engineer Research and

Development Center, United States

Ashfaq Adnan,

University of Texas Arlington, United

States

Justin Wilkerson,

Texas A&M University, United

States

Ke Li,

Schlumberger, TX, United States

Huijuan Zhao,

Clemson University, United States

Rui Zhang,

University of Texas at Dallas, United

States

Qingda Yang,

University of Miami, United States

Alireza Amirkhizi,

University of Massachusetts,

Lowell, United States

Kazem Alidoost,

University of Illinois at Urbana-

Champaign, United States

Xiaoyao Peng,

Carnegie Mellon University, United

States

Sevan Goenezen,

Texas A&M University, United

States

Bahador Bahmani,

University of Tennessee,

Knoxville, United States

Haifeng Zhao,

Chinese Academy of Sciences, China

Vinu Unnikrishnan,

University of Alabama, United

States

Stavros Gaitanaros,

Johns Hopkins University,

United States

Pedro Reis,

EPFL (Switzerland), Switzerland

Xin Ning,

Pennsylvania State University, United

States

Nicolas Triantafyllidis,

Ecole Polytechnique, France

Stelios Kyriakides,

University of Texas, United States

Dai Okumura,

Nagoya University, Japan

Victor Lefevre,

Northwestern University, United

States

George Kardomateas,

Georgia Institute of

Technology, United States

Katia Bertoldi,

Harvard University, United States

Hiro Tanaka,

Osaka University, Japan

Rui Zhang,

University of Texas at Dallas, United

States

Jongmin Shim,

University at Buffalo, United States

Jie Yin,

Temple University, United States

Jaehyung Ju,

Shanghai Jiao Tong University, China

Eduard Karpov,

University of Illinois at Chicago,

United States

Jie Yin,

Temple University, United States

Yaning Li,

University of New Hampshire, United

States

Soumik Banerjee,

Washington State University,

United States

Sridhar Santhanam,

Villanova University, United

States

Yihui Zhang,

Tsing Un China

Dennis Kochmann,

ETH

Wei Cai,

Stanfor

TRACK 12 MECHANICS OF SOLIDS,

STRUCTURES AND FLUIDS

MONDAY, NOVEMBER 12

12-1 MECHANICS OF SOFT MATERIALS

12-1-1 Mechanics of Soft Materials: Structure

Third Floor, David L. Lawrence Convention Center, Room 333

9:45am–11:30am

Session Chair: Shengqiang Cai,

University of California San

Diego, La Jolla, CA, United States

9:45am – Origomu: The Geometry and Mechanics of

Folding Polymer Films and Shells

Invited Presentation. IMECE2018-89449

Ryan Hayward,

University of Massachusetts Amherst,

Amherst, MA, United States

10:27am – Origami/Kirigami-Guided Morphing of

Composite Sheets

Technical Presentation. IMECE2018-89357

Jianxun Cui,

Carnegie Mellon University, Pittsburgh, PA,

United States,

Felipe Poblete, Yong Zhu,

North Carolina State

University, Raleigh, NC, United States

10:48am – Nonlinear Mechanics of Soft Substrates With

Surface Topology

Technical Presentation. IMECE2018-88272

Ranajay Ghosh, Hossein Ebrahimi, Hessein Ali,

University of

Central Florida, Orlando, FL, United States

11:09am – Deformation of Radially Symmetric Shape

Memory Polymer Discs

Technical Presentation. IMECE2018-89289

Russell Mailen,

Auburn University, Auburn, AL, United States,

Catherine Wagner, Jan Genzer, Michael D. Dickey,

North Carolina State University, Raleigh, NC, United States,

Mohammed Zikry,

North Carolina State University, Raleigh,

NC, United States

12-6 IN-SITU TECHNIQUES IN

EXPERIMENTAL MECHANICS

12-6-1 In-Situ Techniques in Experimental Mechanics

Fourth Floor, David L. Lawrence Convention Center, Room 402

9:45am–11:30am

Session Chair: Ryan Berke,

Utah State University, Logan, UT,

United States

9:45am – Experimental Characterization of Polymer Films

and Fabrics at Intermediate Strain Rates

Technical Presentation. IMECE2018-89739

Alireza Amirkhizi, Fateme Aghighi, David Roux,

University of

Massachusetts, Lowell, Lowell, MA, United States

10:06am – Real-Time Visualization of GaN/AlGaN High

Electron Mobility Transistor Failure at Off-State

Technical Presentation. IMECE2018-89116

Zahabul Islam,

Pennsylvania State University, State College,

PA, United States,

Md. Haque, P

ennylvania State University,

University Park, PA, United States,

Nicholas Glavin,

Air Force

Research Laboratory, Ohio, OH, United States

10:27am – Characterization of the Micromechanical

Evolution of Ti-7Al Under the Cyclic Loading Using High

Energy X-Ray Diffraction Microscopy

Technical Presentation. IMECE2018-89152

Rachel E. Lim,

Carnegie Mellon University, Pittsburgh, PA,

United States,

Darren C. Pagan,

Cornell High Energy

Synchrotron Source, Ithaca, NY, United States,

Vahid Tari,

Yufeng Shen, Robert M. Suter, Anthony D. Rollett,

Carnegie

Mellon University, Pittsburgh, PA, United States

10:48am – In Situ Observation on Temperature Dependence

of Martensitic Transformation and Plastic Deformation in

Superelastic NiTi Alloy

Technical Presentation. IMECE2018-88828

Yao Xiao, Pan Zeng, Liping Lei,

Tsinghua University, Beijing,

China

12-10 MODELING AND EXPERIMENTS IN

NANOMECHANICS AND NANOMATERIALS

12-10-1 Modeling and Experiments in

Nanomechanics and Nanomaterials 1

Third Floor, David L. Lawrence Convention Center, Room 335

9:45am–11:30am

Session Chair: Yozo Mikata,

Bechtel, Niskayuna, NY, United

States

Session Co-Chairs: Jeffrey Kysar,

Columbia University, New

York, NY, United States,

Scott Price,

GE Research Center,

Niskayuna, NY, United States,

Changhong Ke,

State University

of New York at Binghamton, Binghamton, NY, United States

9:45am – Post-Buckled Deformation of Graphene

Technical Presentation. IMECE2018-88585

Yozo Mikata,

Bechtel, Niskayuna, NY, United States

10:06am – Material Design for Nanosized FePd

Ferromagnetic Shape Memory Alloy Nano-Materials by

Thermodynamics and Dislocation Punching Models

Technical Presentation. IMECE2018-89454

Minoru Taya,

University of Washington, Seattle, WA, United

States

10:27am – Probing the Structural and Mechanical

Properties of Boron Nitride Nanosheets

Technical Presentation. IMECE2018-87093

Wenyang Qu, Feilin Gou,

State University of New York at

Binghamton, Binghamton, NY, United States,

Xiaoming Chen,

Xi’an Jiaotong University, Xi’an, Shaanxi, China,

Changhong

Ke,

State University of New York at Binghamton, Binghamton,

NY, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

MONDAY, NOVEMBER 

173

10:48am – Probing Mechanics of Monolayer Two-

Dimensional Nanomaterials

Technical Presentation. IMECE2018-86296

Yingchao Yang,

University of Maine, Orono, ME, United States

11:09am – Mechanics of Nanoﬁber Packing in Vesicles:

Effects of Fiber Length, Radius, and Elasticity

Technical Presentation. IMECE2018-88975

Xin Yi,

Peking University, Beijing, China,

Guijin Zou, Huajian

Gao,

Brown University, Providence, RI, United States

12-15 INAUGURAL SYMPOSIUM ON THE

CONSTITUTIVE MODELING OF THE

MECHANICAL BEHAVIOR AND

PERFORMANCE OF ELECTRONIC,

PHOTONIC, MEMS, AND NEMS

MATERIALS, ASSEMBLIES, PACKAGES,

MODULES, AND SYSTEMS

12-15-1 Inaugural Symposium on the Constitutive

Modeling of the Mechanical Behavior and

Performance of Electronic, Photonic, MEMS, and

NEMS Materials, Assemblies, Packages, Modules,

and Systems

Third Floor, David L. Lawrence Convention Center, Room 331

9:45am–11:30am

Session Chair: Martin Ostoja-Starzewski,

University of Illinois

at Urbana-Champaign, Urbana, IL, United States

9:45am – Equivalent Material Properties for Thermo-

Mechanical Modeling of Microelectronic Packages

Technical Presentation. IMECE2018-86238

Yu-Lin Shen,

University of New Mexico, Albuquerque, NM,

United States

10:00am – Does a Fractal Microstructure Require a

Fractional Viscoelastic Model?

Technical Presentation. IMECE2018-88369

Martin Ostoja-Starzewski, Jun Zhang,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States

10:15am – Anisotropic Hill Constants for Steady-State

Creep Behavior of Single Crystal SnAgCu Joints Based on

Multi-scale Modeling

Technical Presentation. IMECE2018-88791

Qian Jiang, Abhijit Dasgupta,

University of Maryland, College

Park, MD, United States

10:30am – Constitutive Model for Pressure-Sensitive

Adhesive (PSA) Joints

Technical Presentation. IMECE2018-88796

Hao Huang, Abhijit Dasgupta,

University of Maryland, College

Park, MD, United States

10:45am – Alleviating Thermomechanical Wrinkling in

Functionally Graded Sandwich Panels Using Nanoscale

Reinforcement of the Core Material

Technical Presentation. IMECE2018-88817

Victor Birman,

Missouri University of Science and Technology,

St. Louis, MO, United States

11:00am – An Overview of Thermomechanical Fatigue in Cu

Interconnects: Probabilistic and Statistical Considerations

for Robust Design and Qualiﬁcation

Technical Presentation. IMECE2018-88843

John Evans,

NASA, Washington, DC, United States,

Bhanu Sood,

NASA, Greenbelt, MD, United States,

Michael Osterman,

University of Maryland, College Park, MD,

United States

12-18 COMPUTATIONAL MODELING OF

EXTREME EVENTS

12-18-1 Computational Modeling of Extreme Events

Third Floor, David L. Lawrence Convention Center, Room 336

9:45am–11:30am

Session Chair: Jason Roth,

U.S. Army - ERDC, Vicksburg, MS,

United States

9:45am – Data-Driven, Co-Designed Simulations and

Experiments of Shock Synthesis

Invited Presentation. IMECE2018-88032

Karel Matouš,

University of Notre Dame, Notre Dame, IN,

United States

10:27am – Modeling and Simulations on Coupled Plastic

Flows and Plastic Strain-Induced Phase Transformations in

Diamond Anvil Cells

Technical Presentation. IMECE2018-89055

Biao Feng,

Los Alamos National Laboratory, Los Alamos, NM,

United States,

Valery Levitas,

Iowa State University, Ames, IA,

United States

10:48am – Dynamic Fragmentation of Brittle Materials

Using Eulerian Methods

Technical Presentation. IMECE2018-89448

Vinamra Agrawal,

Auburn University, Auburn, AL, United

States

11:09am – A Comparison of Mesh-Free and Mesh-Based

Lagrangian Approximations of Manufactured Shear-

Dominated Deformation Fields

Technical Presentation. IMECE2018-89219

Joseph Bishop,

Sandia National Laboratories, Albuquerque,

NM, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

MONDAY, NOVEMBER 

174

12-19 COMPUTATIONAL FLUID-

STRUCTURE INTERACTION

12-19-1 Computational Fluid-Structure Interaction

Third Floor, David L. Lawrence Convention Center, Room 338

9:45am–11:30am

Session Chair: Artem Korobenko,

University of Calgary,

Calgary, AB, Canada

9:45am – Fluid-Structure Interaction Between Pulsatile

Blood Flow and a Curved Stented Coronary Artery on a

Beating Heart: A Four Stent Computational Study

Technical Presentation. IMECE2018-88827

Suncica Canic,

University of California, Berkeley, Berkeley,

Houston, TX, United States,

Martina Bukac,

University of

Notre Dame, South Bend, IN, United States,

Josip Tambaca,

University of Zagreb, Zagreb, Croatia (Hrvatska),

Yifan Wang,

University of California, Berkeley, Berkeley, CA, United States

10:06am – Fluid-Structure Interaction Modeling of

Transcatheter Heart Valve Replacements

Technical Presentation. IMECE2018-90003

Ming-Chen Hsu, Michael C.H. Wu,

Iowa State University,

Ames, IA, United States

10:27am – Fluid-Structure Interaction in Abdominal Aortic

Aneurysm

Technical Presentation. IMECE2018-89030

Siyeong Ju, Linxia Gu, Shengmao Lin,

University of

Nebraska–Lincoln, Lincoln, NE, United States,

Xinwei Han,

Yonghua Bi,

Zhengzhou University, Zhengzhou, China

10:48am – An Open-source Framework for FSI of

Bio-Inspired Flows at High Reynolds Number

Technical Presentation. IMECE2018-89308

Andrew Guarendi, Christin Murphy,

Naval Undersea Warfare

Center, Newport, RI, United States,

Jennifer Franck,

University of Wisconsin-Madison, Madison, WI, United States

11:09am – Optimum Pitching-Heaving of a Foil for

Extracting Power From an Incident Freestream

Technical Presentation. IMECE2018-89680

Shreyas Mandre, Kenny Breuer,

Brown University,

Providence, RI, United States,

Michael Miller,

Brown

University, Pawtucket, RI, United States

12-22 DEFORMATION AND FAILURE OF

MULTIFUNCTIONAL MATERIALS

12-22-1 Deformation and Failure of Multifunctional

Materials

Fourth Floor, David L. Lawrence Convention Center, Room 401

9:45am–11:30am

Session Chair: Charles Wojnar,

Missouri S&T, Rolla, MO,

United States

9:45am – Study of the Effect of Large Deformation Through

a Finite Deformation Based Constitutive Model for Metallic

Glasses

Technical Paper Publication. IMECE2018-86063

Shank S. Kulkarni,

University of North Carolina at Charlotte,

Charlotte, NC, United States,

Tanmay K. Bhandakkar,

Indian

Institute of Technology Bombay, Mumbai, India

10:06am – A Finite Strain Constitutive Model for

Polycrystalline Shape Memory Alloys Accounting for

Pseudoelasticity, One Way Shape Memory Effect,

Orientation, Reorientation, Ferroelasticity, and Latent Heat

Technical Presentation. IMECE2018-88820

Theocharis Baxevanis, Mengqian Zhang,

University of

Houston, Houston, TX, United States

10:27am – Asymptotic Analysis of Sponge Spicules’

Sensitivity to Geometric Imperfection Regarding to

Buckling Instability

Technical Presentation. IMECE2018-89173

Wenqiang Fang, Michael Monn, Haneesh Kesari,

Brown University, Providence, RI, United States

10:48am – On Buckling Analysis for Biomedical Shape

Memory Alloy Stent Graft Under Axial, Lateral and

Combined Loadings

Technical Presentation. IMECE2018-89457

Lei Xu, Hector Larin, Dimitris Lagoudas,

Texas A&M

University, College Station, TX, United States

12-28 INSTABILITIES IN SOLIDS AND

STRUCTURES

12-28-1 Instabilities in Solids and Structures:

Mechanics of Slender solids

Third Floor, David L. Lawrence Convention Center, Room 334

9:45am–11:30am

Session Chair: Stavros Gaitanaros,

Johns Hopkins University,

Baltimore, MD, United States

Session Co-Chair: Pedro Reis,

École Polytechnique Fédérale

de Lausanne, Lausanne, VD, Switzerland

9:45am – Untangling the Mechanics of Elastic Knots

Technical Presentation. IMECE2018-89092

Pedro Reis, Paul Johanns, Paul Grandgeorge,

École

Polytechnique Fédérale de Lausanne, Lausanne, VD,

Switzerland

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

MONDAY, NOVEMBER 

175

10:06am – Bistable Inﬂatable Origami-Inspired Structures

Technical Presentation. IMECE2018-89330

Katia Bertoldi, David Melancon, Chuck Hoberman,

Harvard

University, Cambridge, MA, United States,

Jason Ku, Erik

Demaine,

Massachusetts Institute of Technology, Cambridge,

MA, United States

10:27am – Exploiting Structural Buckling: A Novel

Manufacturing Approach to Three-Dimensional Functional

Mesostructures

Technical Presentation. IMECE2018-89859

Xin Ning,

Pennsylvania State University, Urbana, IL, United

States,

John Rogers,

Northwestern University, Evanston, IL,

United States

10:48am – Tunable Bistablity of Clamped Elastic Beams

Technical Presentation. IMECE2018-89925

Yin Liu, Zhe Xu, Lin Dong, Xiaomin Han, John X.J. Zhang,

Zi Chen,

Dartmouth College, Hanover, NH, United States

11:09am – Mechanically-Guided Assembly of Complex 3D

Mesostructures by Compressive Buckling: Kirigami-

Inspired 3D Membranes and Strain Engineering of

Elastomer Substrates

Technical Presentation. IMECE2018-89161

Haiwen Luan,

Northwestern University, Evanston, IL, United

States,

Yihui Zhang,

Tsinghua University, Beijing, China,

Yonggang Huang,

Northwestern University, Evanston, IL,

United States

12-1 MECHANICS OF SOFT MATERIALS

12-1-2 Mechanics of Soft Materials: Gels/Active

Materials 1

Third Floor, David L. Lawrence Convention Center, Room 333

1:45pm–3:30pm

Session Chair: Shawn Chester,

New Jersey Institute of

Technology, North Caldwell, NJ, United States

1:45pm – Micro-Mechanical Modeling of the Stress

Softening in Double-Network Hydrogels

Technical Paper Publication. IMECE2018-88252

Vahid Morovati, Roozbeh Dargazany,

Michigan State

University, East Lansing, MI, United States

2:00pm – Poroelastic Effects on Fracture of Gels

Technical Presentation. IMECE2018-88961

Yalin Yu, Chad Landis, Rui Huang,

University of Texas at

Austin, Austin, TX, United States

2:15pm – Anti-Fatigue-Fracture Hydrogels by Designing

Crystalline Domains

Technical Presentation. IMECE2018-89088

Shaoting Lin, Xuanhe Zhao,

Massachusetts Institute of

Technology, Cambridge, MA, United States

2:30pm – Modeling Fiber-reinforced Polymeric Gels

Technical Presentation. IMECE2018-89417

Nikola Bosnjak,

New Jersey Institute of Technology, Newark,

NJ, United States,

Howon Lee,

Rutgers, The State University

of New Jersey, Piscataway, NJ, United States,

Shawn Chester,

New Jersey Institute of Technology, North Caldwell, NJ, United

States

2:45pm – A WENO Finite-Difference Scheme for a New

Class of Hamilton-Jacobi Equations in Nonlinear Solid

Mechanics

Technical Presentation. IMECE2018-89236

Victor Lefevre,

Northwestern University, Evanston, IL, United

States,

Oscar Lopez-Pamies,

University of Illinois at Urbana-

Champaign, Urbana, IL, United States

3:00pm – Liquid Metal Elastomer Composites for Low

Temperature Applications

Technical Presentation. IMECE2018-89665

Mohammad H. Malakooti, Navid Kazem, Carmel Majidi,

Carnegie Mellon University, Pittsburgh, PA, United States

12-10 MODELING AND EXPERIMENTS IN

NANOMECHANICS AND NANOMATERIALS

12-10-2 Modeling and Experiments in

Nanomechanics and Nanomaterials 2

Third Floor, David L. Lawrence Convention Center, Room 335

1:45pm–3:30pm

Session Chair: Yozo Mikata,

Bechtel, Niskayuna, NY, United

States

Session Co-Chairs: Jeffrey Kysar,

Columbia University, New

York, NY, United States,

Yingchao Yang,

University of Maine,

Orono, ME, United States

1:45pm – Nano-Emitter Mass-Loss Mechanisms and

Predicted Damage Patterns

Technical Presentation. IMECE2018-88076

Scott Price,

G E Research Center, Niskayuna, NY, United

States,

Yozo Mikata,

Bechtel, Niskayuna, NY, United States

2:06pm – Direct Nanomechanical Measurements of Carbon

Nanotube-Metal Interfaces

Technical Presentation. IMECE2018-87078

Chenglin Yi, Christopher M. Dmuchowski, Feilin Gou,

State

University of New York at Binghamton, Binghamton, NY, United

States,

Xiaoming Chen,

Xi’an Jiaotong University, Xi’an,

Shaanxi, China,

Cheol Park,

NASA Langley Research Center,

Hampton, VA, United States,

Changhong Ke,

State University

of New York at Binghamton, Binghamton, NY, United States

2:27pm – Structural and Mechanical Properties of Boron

Nitride Nanotubes in High Temperature Environments

Technical Presentation. IMECE2018-87074

Xiaoming Che

Xi’an Jiaotong University, Xi’an, Shaanxi,

China,

Christopher M. Dmuchowski,

State University of New

York at Binghamton, Binghamton, NY, United States,

Cheol

Park, Catharine C. Fay,

NASA Langley Resear

Hampton, VA, United States,

Changhong Ke,

State University

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

MONDAY, NOVEMBER 

176

2:48pm – Mechanical and Electrical Properties of Graphene

Nano Mesh Heterojunctions

Technical Presentation. IMECE2018-87021

Ji Zhang, Weixiang Zhang,

University at Buffalo, State

University of New York, Buffalo, NY, United States,

Tarek Ragab,

Arkansas State University, State University,

AR, United States,

Cemal Basaran,

University at Buffalo,

State University of New York, Buffalo, NY, United States

3:09pm – Electron-Induced Wind Forces in Metallic

Graphene Nanoribbons

Technical Presentation. IMECE2018-87022

Ji Zhang,

University at Buffalo, State University of New York,

Buffalo, NY, United States,

Tarek Ragab,

Arkansas State

University, State University, AR, United States,

Cemal

Basaran,

University at Buffalo, State University of New York,

Buffalo, NY, United States

12-18 COMPUTATIONAL MODELING OF

EXTREME EVENTS

12-18-2 Computational Modeling of Extreme Events

Third Floor, David L. Lawrence Convention Center, Room 336

1:45pm–3:30pm

Session Chair: Jason Roth,

U.S. Army - ERDC, Vicksburg, MS,

United States

1:45pm – Constitutive Models and Their Application to

Predict Geomaterial Failure Resulting From Embedded

Detonations

Invited Presentation. IMECE2018-86714

Andy Frank, Jessica Fulk, Jason Roth, Mike Hammons,

U.S. Army - ERDC, Vicksburg, MS, United States

2:27pm – Dislocation Mobility and Non-Schmid Effects in

HMX Under High Pressures

Technical Presentation. IMECE2018-89294

Anirban Pal, Mohammad Khan, Catalin Picu,

Rensselaer

Polytechnic Institute, Troy, NY, United States

2:48pm – Modeling Plastic Slip, Twinning, and Phase

Transformation in Single Crystal Titanium Under Dynamic

Loading Conditions

Technical Presentation. IMECE2018-89056

Biao Feng, Curt Bronkhorst,

Los Alamos National Laboratory,

Los Alamos, NM, United States

3:09pm – Simulation of Delayed Hydride Cracking Behavior

in Zircaloy Cladding Tubes Considering Irradiation Damage

Effects

Technical Presentati

on. IMECE2018-89541

Shurong Ding, Zhongjia Xia, Jingyu Zhang,

Fudan University,

Shanghai, China

12-19 COMPUTATIONAL FLUID-

STRUCTURE INTERACTION

12-19-2 Computational Fluid-Structure Interaction

Third Floor, David L. Lawrence Convention Center, Room 338

1:45pm–3:30pm

Session Chair: Artem Korobenko,

University of Calgary,

Calgary, AB, Canada

1:45pm – A Dual-Solver Hybrid Approach for Fluid-

Structure Interaction of Rotating Systems

Technical Presentation. IMECE2018-89309

Marilyn Smith,

Georgia Institute of Technology, Atlanta, GA,

United States,

Glen Whitehouse,

Continuum Dynamics Inc.,

Ewing, NJ, United States

2:06pm – Computational Aeroelasticity for Systems With

Flexible Wings

Technical Presentation. IMECE2018-88847

Balakumar Balachandran,

University of Maryland, College

Park, Rockville, MD, United States

2:27pm – Constructal Approach in Design of High Aspect-

Ratio Aircraft: The Concept of Flow of Stresses and

Aeroelastic Stability

Technical Presentation. IMECE2018-87824

Pezhman Mardanpour,

Florida International University,

Weston, FL, United States,

Ehsan Izadpanahi, Siavash

Rastkar,

Florida International University, Miami, FL, United

States,

Sylvie Lorente,

University of Toulouse, INSA, Toulouse,

France,

Adrian Bejan,

Duke University, Durham, NC, United

States

2:48pm – Fluid-Structure Interaction Framework for

Compressible Flows

Technical Presentation. IMECE2018-90045

Artem Korobenko,

University of Calgary, Calgary, AB, Canada,

Yuri Bazilevs,

Brown University, Providence, RI, United States,

Ming-Chen Hsu,

Iowa State University, Ames, IA, United

States,

David Kamensky, Georgios Moutsanidis,

Brown

University, Providence, RI, United States

12-28 INSTABILITIES IN SOLIDS AND

STRUCTURES

12-28-2 Instabilities in Solids and Structures:

Numerical/Analytical Stability

Third Floor, David L. Lawrence Convention Center, Room 334

1:45pm–3:30pm

Session Chair: Xin Ning,

Pennsylvania State University,

Urbana, IL, United States

Session Co-Chair: Nicolas Triantafyllidis,

Ecole Polytechnique,

Palaiseau, France

1:45pm – Hierarchical Honeycomb Material Design and

Optimization: Beyond Linearized Behavior

Technical Presentation. IMECE2018-89386

Christelle Combescure,

Université Paris-Est Mar

Champs-sur-Marne, France,

Ryan Elliott,

University of

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

MONDAY, NOVEMBER 

177

2:06pm – Numerical Energy Relaxation and Associated

Microstructure Formation in Problems With Non-Convex

Energetic Potentials

Technical Presentation. IMECE2018-89532

Siddhant Kumar, Vidyasagar Ananthan,

California Institute of

Technology, Pasadena, CA, United States,

Dennis Kochmann,

ETH Zurich, Zurich, Switzerland

2:27pm – Fracture and Healing in Elastomers: A Phase-

Transition Theory and Numerical Implementation

Technical Presentation. IMECE2018-89171

Aditya Kumar,

University of Illinois at Urbana-Champaign,

Urbana, IL, United States,

Krishnaswamy Ravi-Chandar,

University of Texas at Austin, Austin, TX, United States,

Gilles A. Francfort,

Courant Institute of Mathematical

Sciences, New York, NY, United States,

Oscar Lopez-Pamies,

University of Illinois at Urbana-Champaign, Urbana, IL, United

States

2:48pm – Post-Buckling Analysis of Wide Beams

Technical Presentation. IMECE2018-89367

Yuzhen Chen, Lihua Jin,

University of California, Los Angeles,

Los Angeles, CA, United States

3:09pm – Stability Analysis of Step Dynamics in Crystal

Growth

Technical Presentation. IMECE2018-89128

Laurent Guin, Michel Jabbour, Nicolas Triantafyllidis,

Ecole

Polytechnique, Palaiseau, France

12-33 CONGRESS-WIDE SYMPOSIUM ON

NDE & SHM—NONDESTRUCTIVE

CHARACTERIZATION OF SOLIDS,

STRUCTURES AND FLUIDS

12-33-1 Congress-Wide Symposium on NDE &

SHM—Nondestructive Characterization of Solids,

Structures and Fluids

Third Floor, David L. Lawrence Convention Center, Room 331

1:45pm–3:30pm

Session Chair: Soumik Banerjee,

Washington State University,

Pullman, WA, United States

1:45pm – Integrity Evaluation of Composite Cylindrical

Structures

Technical Paper Publication. IMECE2018-87158

Jikai Du,

University at Buffalo, State University of New York,

Buffalo, NY, United States

2:06pm – Locating and Quantifying Through Circular

Damage in CNT/GFRP Composite Panel Using Gaussian Fit

Technical Paper Publication. IMECE2018-87681

Kerim Ikikardaslar,

CCNY/CUNY, New York, NY, United

States,

Feridun Delale,

City College of New York, New York,

NY, United States,

Mahmoud Ardebili,

Borough of Manhattan

Community College/CUNY, New York, NY, United States,

Salih

Yildiz, Kenneth Gollins,

City College of New York, New York,

NY, United States

2:27pm – Analysis Alkali-Silica Reaction in Concrete With

Electromagnetic Methods

Technical Presentation. IMECE2018-88034

Alexander Heifetz,

Argonne National Laboratory, Lemont, IL,

United States,

Anthony Bentivegna,

CTLGroup, Skokie, IL,

United States,

Sasan Bakhtiari,

Argonne National Laboratory,

Lemont, IL, United States

2:48pm – Entropy as an Indicator of Stress-Relaxation in

Composites

Technical Presentation. IMECE2018-89100

Subir Patra, Sourav Banerjee,

University of South Carolina,

Columbia, SC, United States

3:09pm – Prediction of Leak Rates Through Porous

Materials Using Analytical and Numerical Approaches

Technical Paper Publication. IMECE2018-88683

Ali Salah Omar Aweimer, Abdel-Hakim Bouzid,

École

Technologie Superieure, Montreal, QC, Canada,

Zijian Zhao,

Skyeetech Ltd., Shenyang, China

12-36 KEYNOTE LECTURES ON

COMPUTATIONAL MECHANICS

12-36-1 Keynote Lectures on Computational

Mechanics – 1

Fourth Floor, David L. Lawrence Convention Center, Room 402

1:45pm–3:30pm

Session Chair: Qian Qian,

University of Texas at Dallas,

Richardson, TX, United States

Session Co-Chair: Caglar Oskay,

Vanderbilt University,

Nashville, TN, United States

1:45pm – Coupled Shock-Plasticity-Damage Modeling of

Explosive Welding by RKPM

Invited Presentation. IMECE2018-88929

Jiun-Shyan Chen, Jonghyuk Baek,

University of California,

San Diego, La Jolla, CA, United States

2:27pm – Computational Design of Phononic Topological

Insulators

Invited Presentation. IMECE2018-89015

Harold Park,

Boston University, Brookline, MA, United States,

Nanthakumar Subbiah, Xiaoying Zhuang,

Leibniz University

Hannover, Hannover, Germany,

Timon Rabczuk,

Bauhaus-

University Weimar, Weimar, Germany

3:09pm – Emerging Trends in Computational Mechanics—

Data-Driven Computation and Mechanics

Technical Presentation. IMECE2018-88908

Ashfaq Adnan,

University of Texas at Arlington, Arlington, TX,

United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

MONDAY, NOVEMBER 

178

12-38 YOUNG MEDALIST SYMPOSIUM

12-38-1 Young Medalist Symposium

Fourth Floor, David L. Lawrence Convention Center, Room 401

1:45pm–3:30pm

Session Chair: Yihui Zhang,

Tsinghua University, Beijing, China

1:45pm – Propagating Transition Fronts in (Meta-)Materials:

From Simple Chains to 2D Patterns

Technical Presentation. IMECE2018-89052

Dennis Kochmann, Romik Khajehtourian,

ETH Zurich,

Zurich, Switzerland,

Michael Frazier,

University of California,

San Diego, La Jolla, CA, United States,

Katia Bertoldi,

Harvard University, Cambridge, MA, United States

2:06pm – Evolution of Stress and Structure During

Electrochemical Cycling of Sulfur Cathodes

Technical Presentation. IMECE2018-89256

Matt Pharr,

Texas A&M University, College Station, TX, United

States

2:27pm – Energy Localization in Nonlinear Dynamical

Systems: Design, Measurement, and Control

Technical Presentation. IMECE2018-88949

Edmon Perkins,

Auburn University, Auburn, AL, United States

2:48pm – Coarse-Graining Out of Equilibrium: From

Particles to Dissipative PDEs

Technical Presentation. IMECE2018-88948

Celia Reina, Xiaoguai Li,

University of Pennsylvania,

Philadelphia, PA, United States,

Nicolas Dirr, Peter

Embacher,

University of Cardiff, Cardiff, United Kingdom,

Johannes Zimmer,

University of Bath, Bath, United Kingdom

12-1 MECHANICS OF SOFT MATERIALS

12-1-3 Mechanics of Soft Materials: Gels/Active

Materials 2

Third Floor, David L. Lawrence Convention Center, Room 333

3:45pm–5:30pm

Session Chair: Shawn Chester,

New Jersey Institute of

Technology, North Caldwell, NJ, United States

3:45pm – Phase Separation in Elastomeric Gels

Technical Presentation. IMECE2018-88670

Wei Hong,

Iowa State University, Ames, IA, United States

4:06pm – New Insights on the Viscoelastic Behavior of

Polymeric Gels

Technical Presentation. IMECE2018-89413

Nikola Bosnjak, Justin Newkirk,

New Jersey Institute of

Technology, Newark, NJ, United States,

Shawn Chester,

New Jersey Institute of Technology, North Caldwell, NJ, United

States

4:27pm – Swelling, Drying and Viscoelasticity of Hydrogels

Technical Presentation. IMECE2018-89286

Si Chen, Krishnaswamy Ravi-Chandar,

University of Texas at

Austin, Austin, TX, United States

4:48pm – Comparison Between Temperature-Dependent

Mechanical Properties of Thermo-Responsive Poly (Vinyl

Alcohol) Poly (N-Isopropyl Acrylamide) Hydrogel and Non-

Thermo-Responsive Alginate Hydrogel

Technical Pre

sentation. IMECE2018-87790

Yuqi Jin, Shuai Ju, Hyeonu Heo,

University of North Texas,

Denton, TX, United States,

Ezekiel Walker,

Echonovus Inc.,

Denton, TX, United States,

Haifeng Zhang, Tae-Youl Choi,

Arup Neogi,

University of North Texas, Denton, TX, United

States

5:09pm – A New Scaling Law for Describing How Water

Content Affects Elastic Modulus and Fracture Energy of

Hydrogels

Technical Presentation. IMECE2018-89158

Zishun Liu, Ziqian Li,

Xi’an Jiaotong University, Xi’an, China

12-10 MODELING AND EXPERIMENTS IN

NANOMECHANICS AND NANOMATERIALS

12-10-3 Modeling and Experiments in

Nanomechanics and Nanomaterials 3

Third Floor, David L. Lawrence Convention Center, Room 335

3:45pm–5:30pm

Session Chair: Yozo Mikata,

Bechtel, Niskayuna, NY, United

States

Session Co-Chairs: Jeffrey Kysar,

Columbia University, New

York, NY, United States,

George Voyiadjis,

Louisiana State

University, Baton Rouge, LA, United States,

Tarek Ragab,

Arkansas State University, State University, AR, United States

3:45pm – Modeling of Indentation Size Effect in Amorphous

Polymers

Technical Presentation. IMECE2018-87076

George Voyiadjis, Leila Malekmotiei, Aref Samadi-Dooki,

Louisiana State University, Baton Rouge, LA, United States

4:06pm – Frictional Properties of Graphene Nano Flakes on

Diamond Substrate

Technical Presentation. IMECE2018-89268

Ji Zhang, Ehsan Osloub, Fatima Siddiqui, Weixiang Zhang,

University at Buffalo, State University of New York, Buffalo, NY,

United States,

Tarek Ragab,

Arkansas State University, State

University, AR, United States,

Cemal Basaran,

University at

Buffalo, State University of New York, Buffalo, NY, United

States

4:27pm – Tuning the Contact Angle and Evaporation Rate

of Water Droplets on Laser Processed Graphene Flakes

Technical Presentation. IMECE2018-89949

Srilok Srinivasan,

Iowa State University, Ames, IA, United

States,

Ganesh Balasubramanian,

Lehigh University,

Bethlehem, PA, United States,

Suprem Das,

Kansas State

University, Manhattan, KS, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

MONDAY, NOVEMBER 

179

4:48pm – Mechanistic Insights Into Crystalline Interfaces

via Thermal Fluctuations

Technical Presentation. IMECE2018-89997

Dengke Chen,

Georgia Institute of Technology, Atlanta, GA,

United States,

Yashashree Kulkarni,

University of Houston,

Houston, TX, United States

5:09pm – OpenKIM: Reliable Interatomic Models for

Multiscale Simulations

Technical Presentation. IMECE2018-89384

Ryan Elliott,

University of Minnesota, Saint Paul, MN, United

States,

Ellad Tadmor, Daniel Karls,

University of Minnesota,

Minneapolis, MN, United States,

James Sethna,

Cornell

University, Ithaca, NY, United States

12-13 RECENT ADVANCES AND

APPLICATIONS IN MESHFREE AND

PARTICLE METHODS

12-13-1 Recent Advances and Applications in

Meshfree and Particle Methods

Third Floor, David L. Lawrence Convention Center, Room 336

3:45pm–5:30pm

Session Chair: Sheng-Wei Chi,

University of Illinois at

Chicago, Chicago, IL, United States

Session Co-Chair: Pablo Seleson,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States

3:45pm – Methods and Challenges of Material Failure

Modeling and Multiscale Computation in Industrial

Applications

Technical Presentation. IMECE2018-88772

C.T. Wu, Wei Hu, Bo Ren, Youcai Wu, Yong Guo, Xiaofei

Pan, Zeliang Liu,

Livermore Software Technology Corporation,

Livermore, CA, United States

4:20pm – Generalized Reproducing Kernel Peridynamics

Technical Presentation. IMECE2018-89871

Michael Hillman,

Pennsylvania State University, University

Park, PA, United States

4:35pm – Convergence Studies in Meshfree Peridynamic

Simulations

Technical Presentation. IMECE2018-89982

Pablo Seleson,

Oak Ridge National Laboratory, Oak Ridge,

TN, United States,

David Littlewood,

Sandia National

Laboratories, Albuquerque, NM, United States

4:50pm – On the Stability of the Generalized, Ordinary,

Finite Deformation Constitutive Correspondence Model of

Peridynamics

Technical Presentation. IMECE2018-89917

Masoud Behzadinasab, John Foster,

University of Texas at

Austin, Austin, TX, United States

5:05pm – Consistent Strong Enforcement of Essential

Boundary Conditions in Meshfree Methods

Technical Presentation. IMECE2018-89937

Kuan-Chung Lin,

Pennsylvania State University, State College,

PA, United States,

Michael Hillman,

Pennsylvania State

University, University Park, PA, United States

12-19 COMPUTATIONAL FLUID-

STRUCTURE INTERACTION

12-19-3 Computational Fluid-Structure Interaction

Third Floor, David L. Lawrence Convention Center, Room 338

3:45pm–5:30pm

Session Chair: Artem Korobenko,

University of Calgary,

Calgary, AB, Canada

3:45pm – A Corrected Point-Particle Method for Simulation

of Particle-Laden Flows

Technical Presentation. IMECE2018-88559

Mahdi Esmaily,

Cornell University, Ithaca, NY, United States,

Jeremy A. Horwitz,

Stanford University, Stanford, CA, United

States

4:06pm – An Adaptive Robin Transmission Condition for

Fluid-Structure Coupled Simulations

Technical Presentation. IMECE2018-89280

Shunxiang Cao,

Virginia Tech, Blacksburg, VA, United States,

Alex Main,

Duke University, Durham, NC, United States,

Kevin G. Wang,

Virginia Tech, Blacksburg, VA, United States

4:27pm – Partitioned Coupling Method Between Three-

Dimensional Heat Conduction Analysis and

One-Dimensional Analysis of Cooling Pipe Model

Technical Presentation. IMECE2018-88979

Naoto Mitsume, Tomonori Yamada, Shinobu Yoshimura,

University of Tokyo, Tokyo, Japan

4:48pm – Computational Fluid Structure Interaction

Simulation and Validation of Crossﬂow Through a Tube

Bundle

Technical Presentation. IMECE2018-89759

Landon Brockmeyer,

Texas A&M University, College Station,

TX, United States,

Elia Merzari,

Argonne National Laboratory,

Lemont, IL, United States,

Jerome Solberg,

LLNL, Livermore,

CA, United States,

Yassin Hassan,

Texas A&M University,

College Station, TX, United States

5:09pm – Fluid-Structure Interactions Using an Immersed

Boundary Method: A Turbulence Generator

Technical Presentation. IMECE2018-89305

Siamak Mirfendereski, Jae Sung Park,

University of

Nebraska–Lincoln, Lincoln, NE, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

MONDAY, NOVEMBER 

180

12-22 DEFORMATION AND FAILURE OF

MULTIFUNCTIONAL MATERIALS

12-22-2 Deformation and Failure of Multifunctional

Materials

Fourth Floor, David L. Lawrence Convention Center, Room 405

3:45pm–5:30pm

Session Chair: Russell Mailen,

Auburn University, Auburn, AL,

United States

3:45pm – Mechanics of Fracture in Lithium-Ion Storage

Materials

Technical Presentation. IMECE2018-89837

Xueju Wang,

University of Missouri, Columbia, Columbia, MO,

United States,

Min Zhou, Shuman Xia,

Georgia Institute of

Technology, Atlanta, GA, United States

4:06pm – Design and Characteristic Analysis of

Amalgamated Transparent Materials for Armor Structures

Using Defeating Ballistic Experimentation

Technical Paper Publication. IMECE2018-86122

Emad Attalla,

Lawrence Technological University, Southeld,

MI, United States,

Steven Grate,

AM General LLC, Auburn

Hills, MI, United States,

Badih Jawad,

Lawrence Technological

University, Dearborn Heights, MI, United States,

Vernon

Fernandez, Sabah Abro, Liping Liu,

Lawrence Technological

University, Southeld, MI, United States

4:27pm – Experimental Determination of Crack Growth

Rates During Actuation of NiTi and NiTiHf Shape Memory

Alloys

Technical Presentation. IMECE2018-89010

Ceylan Hayrettin, Benjamin Young,

Texas A&M University,

College Station, TX, United States,

Theocharis Baxevanis,

University of Houston, Houston, TX, United States,

Ibrahim

Karaman, Dimitris Lagoudas,

Texas A&M University, College

Station, TX, United States

4:48pm – Failure Mechanism of Cementitious

Nanocomposites Reinforced by Multi-Walled and Single-

Walled Carbon Nanotubes Under Splitting Tensile Test

Technical Paper Publication. IMECE2018-88512

Robabeh Jazaei, Moses Karakouzian, Brendan O’Toole,

Jaeyun Moon, Samad Gharehdaghi,

University of Nevada,

Las Vegas, Las Vegas, NV, United States

12-28 INSTABILITIES IN SOLIDS AND

STRUCTURES

12-28-3 Instabilties in Solids and Structures: Active

and Soft Materials

Third Floor, David L. Lawrence Convention Center, Room 334

3:45pm–5:30pm

Session Chair: Stelios Kyriakides,

University of Texas at

Austin, Austin, TX, United States

Session Co-Chair: Dai Okumura,

Nagoya University, Nagoya,

Japan

3:45pm – Swelling-Induced Strain Softening of Swollen

Elastomers

Technical Presentation. IMECE2018-89159

Dai Okumura,

Nagoya University, Nagoya, Japan

4:06pm – Nonlinear Electroelastic Deformations of Soft

Layered Composites Containing Space Charges, With

Application to Electrets

Technical Presentation. IMECE2018-89237

Victor Lefevre,

Northwestern University, Evanston, IL, United

States,

Oscar Lopez-Pamies,

University of Illinois at Urbana-

Champaign, Urbana, IL, United States

4:27pm – Bifurcation Analysis of Twisted Liquid Crystal

Bilayers

Technical Presentation. IMECE2018-89046

Dipayan Mukherjee,

Ecole Polytechnique, CNRS, Palaiseau,

Ile-de-France, France,

Kostas Danas,

LMS, CNRS, Ecole

Polytechnique, Palaiseau, Ile-de-France, France,

Nicolas

Triantafyllidis,

Ecole Polytechnique, Palaiseau, France

4:48pm – Rayleigh-Taylor Instability in a Conﬁned Elastic

Soft Cylinder

Technical Presentation. IMECE2018-89162

Yue Zheng, Shengqiang Cai,

University of California San

Diego, La Jolla, CA, United States

5:09pm – Freestanding 3D Mesostructures and Functional

Devices Based on Mechanically Induced Assembly of

Shape Memory Polymers

Technical Presentation. IMECE2018-89948

Xueju Wang,

University of Missouri, Columbia, Columbia, MO,

United States,

Xiaogang Guo,

Tsinghua University, Beijing,

China,

Yonggang Huang,

Northwestern University, Evanston,

IL, United States,

Yihui Zhang,

Tsinghua University, Beijing,

China,

John Rogers,

Northwestern University, Evanston, IL,

United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

MONDAY, NOVEMBER 

181

12-35 CONGRESS-WIDE SYMPOSIUM ON

NDE & SHM—ACTIVE AND PASSIVE

HEALTH MONITORING OF STRUCTURES

12-35-1 Congress-Wide Symposium on NDE &

SHM—Active and Passive Health Monitoring of

Structures

Third Floor, David L. Lawrence Convention Center, Room 331

3:45pm–5:30pm

Session Chair: Sridhar Santhanam,

Villanova University,

Collegeville, PA, United States

3:45pm – Acoustic Emission Low-Temperature

Performance Grade Evaluation of Asphalt Roadways

Materials

Technical Paper Publication. IMECE2018-86067

Lihui Sun,

University of Illinois at Urbana-Champaign, Urbana,

IL, United States,

Behzad Behnia,

Clarkson University, New

York, NY, United States,

William Buttlar,

University of Missouri,

Columbia, Columbia, MO, United States,

Henrique Reis,

University of Illinois at Urbana-Champaign, Urbana, IL, United

States

4:06pm – Amplitude and Sweeping Direction Dependent

Nonlinear Ultrasonic Resonance Spectroscopy for Fatigue

Crack Detection

Technical Paper Publication. IMECE2018-86221

Yanfeng Shen, Nipon Roy, Junzhen Wang, Zixuan Liu,

Danyu Rao, Wu Xu,

Shanghai Jiao Tong University, Shanghai,

China

4:27pm – Improved Nonlinear Ultrasonic Guided Wave

Damage Detection Using a Bandgap Meta-Surface

Technical Paper Publication. IMECE2018-86222

Yiran Tian, Yanfeng Shen,

Shanghai Jiao Tong University,

Shanghai, China

4:48pm – Coupling Behaviors in Remotely Bonded Fiber

Bragg Grating Sensors for Lamb Wave Detection

Technical Presentation. IMECE2018-87972

Junghyun Wee, Drew Hackney, Kara Peters,

North Carolina

State University, Raleigh, NC, United States

5:09pm – Acoustoelastic Dispersion Curves for Lamb

Waves in the Presence of Stress Gradients

Technical Presentation. IMECE2018-89278

Kranthi Prakash Peddeti,

FLSmidth Inc./Villanova University,

Bethlehem, PA, United States,

Sridhar Santhanam,

Villanova

University, Collegeville, PA, United States

12-36 KEYNOTE LECTURES ON

COMPUTATIONAL MECHANICS

12-36-2 Keynote Lectures on Computational

Mechanics – 2

Fourth Floor, David L. Lawrence Convention Center, Room 402

3:45pm–5:30pm

Session Chair: Ashfaq Adnan,

University of Texas at Arlington,

Arlington, TX, United States

Session Co-Chair: Caglar Oskay,

Vanderbilt University,

Nashville, TN, United States

3:45pm – Efﬁcient Iterative Solvers for Multiscale and

Multiphysics Problems

Invited Presentation. IMECE2018-88805

Suvranu De,

Rensselaer Polytechnic Institute, Troy, NY, United

States

4:27pm – Dynamic Fracture of Metals: A Uniﬁed Modeling

Approach

Invited Presentation. IMECE2018-88904

Haim Waisman,

Columbia University, New York, NY, United

States

5:09pm – Advances in Multiscale and Multiphysics Methods

Technical Presentation. IMECE2018-88907

Qian Qian,

University of Texas at Dallas, Richardson, TX,

United States

12-38 YOUNG MEDALIST SYMPOSIUM

12-38-2 Young Medalist Symposium

Fourth Floor, David L. Lawrence Convention Center, Room 401

3:45pm–5:30pm

Session Chair: Dennis Kochmann,

ETH Zurich, Zurich,

Switzerland

3:45pm – Morphable 3D Mesostructures and

Microelectronic Devices by Multistable Buckling

Mechanics

Technical Presentation. IMECE2018-89279

Yihui Zhang,

Tsinghua University, Beijing, China

4:06pm – Structural and Microstructural Inﬂuence on

Deformation and Fracture of Dual-Phase Steels

Technical Presentation. IMECE2018-89288

Xinzhu Zheng,

Texas A&M University, College Station, TX,

United States,

Shmuel Osovski,

Technion – Israeli Institute of

Technology, Haifa, Israel,

Ankit Srivastava,

Texas A&M

University, College Station, TX, United States

4:27pm – Combining High-Stiffness and High-Damping in

Ceramics via the Domain Switching Mechanism in

Ferroelectrics

Technical Presentation. IMECE2018-89771

Charles Wojnar,

Missouri S&T, Rolla, MO, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

MONDAY, NOVEMBER 

182

TUESDAY, NOVEMBER 13

12-40 PLENARY

12-40-1 Mechanics of Solids, Structures and Fluids

Plenary I

Third Floor, David L. Lawrence Convention Center, Room 308

8:00am–8:45am

8:00am – The Isogeometric Approach to Analysis

Plenary Presentation. IMECE2018-90104

Thomas Hughes, Jr.,

University of Texas at Austin, Austin, TX,

United States

12-40 PLENARY

12-40-2 Mechanics of Solids, Structures and Fluids

Plenary II

Third Floor, David L. Lawrence Convention Center, Room 308

9:00am–9:45am

9:00am – How to Design Quasibrittle and Lamellar

Biomimetic Structures for Failure Probability

Plenary Presentation. IMECE2018-90105

Zdenek Bazant,

Northwestern University, Evanston, IL, United

States

12-1 MECHANICS OF SOFT MATERIALS

12-1-4 Mechanics of Soft Materials: Constitutive

Modeling

Third Floor, David L. Lawrence Convention Center, Room 336

10:00am–11:45am

Session Chair: Qiming Wang,

University of Southern

California, Los Angeles, CA, United States

10:00am – Conjugate Stress/Strain Pair Approach for

Anisotropic Materials

Technical Presentation. IMECE2018-87172

Alan Freed, Veysel Erel, Mingliang Jiang,

Texas A&M

University, College Station, TX, United States

10:21am – A Generalized Approach to Improve

Approximation of Inverse Langevin Function

Technical Paper Publication. IMECE2018-88228

Vahid Morovati, Roozbeh Dargazany, Hamid Mohammadi,

Michigan State University, East Lansing, MI, United States

10:42am – An Improved Non-Gaussian Statistical Theory of

Rubber Elasticity for Short Chains

Technical Paper Publication. IMECE2018-88234

Vahid Morovati, Roozbeh Dargazany,

Michigan State

University, East Lansing, MI, United States

11:03am – Modeling Tensile-Torsion Response of Double

Twisted Helical Yarns

Technical Paper Publication. IMECE2018-88265

Roozbeh Dargazany,

Michigan State University, East Lansing,

MI, United States,

Jiaqi Lin,

Massachusetts Institute of

Technology, Cambridge, MI, United States,

Hamid

Mohammadi, Vahid Morovati,

Michigan State University, East

Lansing, MI, United States

11:24am – Micromechanics to Macroscale Constitutive

Modeling of Flexible Foams

Technical Presentation. IMECE2018-89349

Kevin Long, Dan Bolintineanu, Sharlotte L.B. Kramer,

Robert Waymel, Enrico Quintana,

Sandia National

Laboratories, Albuquerque, NM, United States,

Michael

Neilsen,

Sandia National Laboratories, Lawrence, KS, United

States

12-8 MULTI-SCALE COMPUTATIONS IN

FLUIDS, STRUCTURES, AND MATERIALS

12-8-1 Multi-Scale Computations in Fluids,

Structures, and Materials 1

Fourth Floor, David L. Lawrence Convention Center, Room 401

10:00am–11:45am

Session Chair: Yozo Mikata,

Bechtel, Niskayuna, NY, United

States

Session Co-Chairs: Glaucio Paulino,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States,

Karel Matouš,

University of Notre Dame, Notre Dame, IN, United States

10:00am – Fatigue Crack Propagation for Semi-Elliptical

Cracks

Technical Presentation. IMECE2018-87188

Yozo Mikata,

Bechtel, Niskayuna, NY, United States

10:21am – Multiresolution Modeling and Error Control With

an Adaptive Wavelet Algorithm

Technical Presentation. IMECE2018-88577

Cale Harnish, Karel Matouš,

University of Notre Dame, Notre

Dame, IN, United States,

Daniel Livescu,

Los Alamos National

Laboratory, Los Alamos, NM, United States

10:42am – Computational Mechanics of the Size Effects

and Shearbands Based on Coupled Thermo-Mechanical

Strain Gradient Plasticity Framework

Technical Presentation. IMECE2018-87095

George Voyiadjis, Yooseob Song,

Louisiana State University,

Baton Rouge, LA, United States

11:03am – Simultaneous Spatial and Temporal Coarse-

Graining: From Particle Dynamics to Continuum

Thermoelasticity

Technical Presentation. IMECE2018-89482

Celia Reina, Xiaoguai Li,

University of Pennsylvania,

Philadelphia, PA, United States

11:24am – Supercoiling of Kirchhoff Rods Under

Continuously Distributed Electrostatic Charge and Its

Application to DNA

Technical Presentation. IMECE2018-89277

Raushan Singh, Ajeet Kumar,

Indian Institute of Technology

Delhi, New Delhi, Delhi, India

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

TUESDAY, NOVEMBER 

183

12-10 MODELING AND EXPERIMENTS IN

NANOMECHANICS AND NANOMATERIALS

12-10-4 Modeling and Experiments in

Nanomechanics and Nanomaterials 4

Third Floor, David L. Lawrence Convention Center, Room 335

10:00am–11:45am

Session Chair: Yozo Mikata,

Bechtel, Niskayuna, NY, United

States

Session Co-Chairs: Jeffrey Kysar,

Columbia University, New

York, NY, United States,

Ryan Elliott,

University of Minnesota,

Saint Paul, MN, United States,

Yashashree Kulkarni,

University

of Houston, Houston, TX, United States

10:00am – Mechanical Properties of P3HT:PCBM Bulk-

Heterojunction Thin Films by Coarse-Grained Molecular

Dynamics

Technical Presentation. IMECE2018-86446

Joydeep Munshi, Ganesh Balasubramanian,

Lehigh

University, Bethlehem, PA, United States

10:21am – Effect of Size and Crystallography in SiC

Nanowire

Technical Presentation. IMECE2018-89979

Fazle Elahi, Md. Hossain,

University of Delaware, Newark, DE,

United States

10:42am – Crack Deﬂection-Penetration at a Nanoscale

Interface of Graphene/hBN Heterostructure

Technical Presentation. IMECE2018-89981

Tousif Ahmed, Md. Hossain,

University of Delaware, Newark,

DE, United States

11:03am – 2D Crystallization of Poly(Vinyl Alcohol)

Monolayer on Graphene Oxide (GO) and Its Role in

Improving Interfacial Shear Strength in GO at Different

Temperature

Technical Presentation. IMECE2018-89996

Wei Gao, Arman Ghasemi,

University of Texas at San Antonio,

San Antonio, TX, United States

11:24am – In Silico Preparation and Mesoscopic Modelling

of Carbon Nanotube Thin Films With Covalent Cross-Links

Technical Presentation. IMECE2018-87658

Alexey Volkov, Md. Abu Horaira Banna, U

niversity of

Alabama, Tuscaloosa, AL, United States

12-12 MECHANICS OF THIN-FILM AND

MULTI-LAYER STRUCTURES

12-12-1 Mechanics of Thin-Film and Multi-Layer

Structures

Fourth Floor, David L. Lawrence Convention Center, Room 404

10:00am–11:45am

Session Chair: Shuodao Wang,

Oklahoma State University,

Stillwater, OK, United States

10:00am – Buckling of a Stiff Thin Film on an Elastic Graded

Compliant Substrate

Technical Presentation. IMECE2018-89232

Jizhou Song,

Zhejiang University, Hangzhou, Zhejiang, China

10:21am – Wrinkling and Cracking/Folding for Multiscale

Hierarchical Surface Morphologies

Technical Presentation. IMECE2018-89524

Jianliang Xiao,

University of Colorado Boulder, Boulder, CO,

United States

10:42am – On Bistability of a Plate Driven by Geometric

Asymmetry

Technical Presentation. IMECE2018-89980

Guangchao Wan,

Dartmouth College, Hanover, NH, United

States,

Qiaohang Guo,

FuJian University of Technology,

Fuzhou, China,

Xiaomin Han, Shicheng Huang, Zi Chen,

Dartmouth College, Hanover, NH, United States

11:03am – Spontaneous Buckling-Driven Periodic

Delamination of Thin Films on Soft Substrates Under Large

Compression

Technical Presentation. IMECE2018-89248

Qiuting Zhang,

Temple University, Philadelphia, PA, United

States,

Jie Yin,

Temple University, Haverford, PA, United States

11:24am – Understanding the Bending Behaviors of

Multilayer 2D Materials

Technical Presentation. IMECE2018-89090

Zhaohe Dai, Nanshu Lu, U

niversity of Texas at Austin, Austin,

TX, United States

12-19 COMPUTATIONAL FLUID-

STRUCTURE INTERACTION

12-19-4 Computational Fluid-Structure Interaction

Fourth Floor, David L. Lawrence Convention Center, Room 402

10:00am–11:45am

Session Chair: Artem Korobenko,

University of Calgary,

Calgary, AB, Canada

10:00am – Isogeometric Analysis of Thermal Multi-Phase

Flows and Its Applications to Bubble Dynamics and

Manufacturing Processes

Technical Presentation. IMECE2018-89506

Jinhui Yan,

University of Illinois at Urbana-Champaign,

Urbana, IL, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

TUESDAY, NOVEMBER 

184

10:21am – Analysis of the Fluid Motion Induced by a

Vibrating Lamina Through Free Surface-Lattice Boltzmann

Coupled Method

Technical Paper Publication. IMECE2018-87715

Daniele Chiappini, Giovanni Di Ilio,

University of Rome

Niccoló Cusano, Rome, Rome, Italy,

Gino Bella,

University of

Rome Tor Vergata, Rome, Rome, Italy

10:42am – Study on Acoustic Phenomena of Drop Impact

on Elastic Wall

Technical Presentation. IMECE2018-88974

Wen Cheng,

Beijing Institute of Technology, Beijing, China

11:03am – Numerical Modeling and Approximation of the

Coupling Lamb Wave Propagation With Fluid-Structure

Interaction Problem

Technical Paper Publication. IMECE2018-87448

Bhuiyan Shameem Mahmood Ebna Hai, Markus Bause,

Helmut Schmidt University, Hamburg, Germany

11:24am – Wind Turbine Tower Inspection Improvement

and Fatigue Analysis

Technical Presentation. IMECE2018-89071

Afshin H. Zahraee,

Purdue University Northwest, Chicago, IL,

United States

12-28 INSTABILITIES IN SOLIDS AND

STRUCTURES

12-28-4 Instabilities in Solids and Structures:

Stability of Composites, Foams/Open-Cell Materials

Third Floor, David L. Lawrence Convention Center, Room 338

10:00am–11:45am

Session Chair: Victor Lefevre,

Northwestern University,

Evanston, IL, United States

Session Co-Chair: George Kardomateas,

Georgia Institute of

Technology, Alpharetta, GA, United States

10:00am – Nonlinear High Order Analysis for the Buckling

and Post-Buckling Behavior of Sandwich Composites

Technical Presentation. IMECE2018-89711

Zhangxian Yuan,

Georgia Institute of Technology, Atlanta, GA,

United States,

George Kardomateas,

Georgia Institute of

Technology, Alpharetta, GA, United States

10:21am – Numerical Modeling of Multiaxial Crushing of

Open-Cell Foams

Technical Presentation. IMECE2018-89131

Chenglin Yang, Stelios Kyriakides,

University of Texas at

Austin, Austin, TX, United States

10:42am – Mechanics of Brittle Foams

Technical Presentation. IMECE2018-89735

Sirui Bi, Stavros Gaitanaros,

Johns Hopkins University,

Baltimore, MD, United States

11:03am – Macroscopic Instabilities and Domain Formation

in Neo-Hookean Laminates

Technical Presentation. IMECE2018-89307

Joshua Furer, Pedro Ponte Castaòeda,

University of

Pennsylvania, Philadelphia, PA, United States

11:24am – Breaking Symmetry in Externally Pressurized

Spherical Shells for Imperfection-Insensitive Designs

Technical Presentation. IMECE2018-89888

Xin Ning,

Pennsylvania State University, Urbana, IL, United

States

12-39 DRUCKER MEDAL SYMPOSIUM

12-39-1 Drucker Medal Symposium

Fourth Floor, David L. Lawrence Convention Center, Room 403

10:00am–11:45am

Session Chair: Wei Cai,

Stanford University, Stanford, CA,

United States

10:00am – Properties of the Eshelby Tensor and Existence

of the Equivalent Ellipsoidal Inclusion Solution

Technical Presentation. IMECE2018-89382

Wei Cai,

Stanford University, Stanford, CA, United States,

David Barnett,

Stanford University, Sunnyvale, CA, United

States

10:21am – Liquid Inclusions in Soft Materials: Capillary

Effect, Mechanical Stiffening and Enhanced

Electromechanical Response

Technical Presentation. IMECE2018-89074

Sana Krichen,

University of Houston, Houston, TX, United

States,

Liping Liu,

Rutgers, The State University of New Jerey,

Piscataway, NJ, United States,

Pradeep Sharma,

University of

Houston, Houston, TX, United States

10:42am – The Waves of Phase Change

Technical Presentation. IMECE2018-89061

Xanthippi Markenscoff,

University of California, San Diego,

La Jolla, CA, United States

11:03am – A Piezoelectric Inclusion of Arbitrary Shape With

Weakly and Highly Conducting Imperfect Interface

Technical Presentation. IMECE2018-89865

Les Sudak,

University of Calgary, Calgary, AB, Canada,

Daniel McArthur, Becht

Engineering, Calgary, AB, Canada

11:24am – Discrete Shear Transformation Zone (STZ)

Plasticity

Technical Presentation. IMECE2018-89101

Alan Needleman, Babak Kondori, Manish Vasoya, Ahmed

Amine Benzerga,

Texas A&M University, College Station, TX,

United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

TUESDAY, NOVEMBER 

185

12-1 MECHANICS OF SOFT MATERIALS

12-1-5 Mechanics of Soft Materials: Bioinspiration

and Biomimetics

Third Floor, David L. Lawrence Convention Center, Room 336

1:45pm–3:30pm

Session Chair: Sung Kang,

Johns Hopkins University,

Baltimore, MD, United States

1:45pm – Slack Lengths of the Bands of the Medial Ulnar

Collateral Ligament: Experiment and Model

Technical Presentation. IMECE2018-87494

David Jordan, Mark Carl Miller,

University of Pittsburgh,

Pittsburgh, PA, United States,

Alexander Kharlamov,

Allegheny General Hospital, Pittsburgh, PA, United States

2:06pm – Understanding the Tunable Adhesion of Wrinkled

Surfaces via a Lattice Model

Technical Presentation. IMECE2018-87812

Teng Zhang,

Syracuse University, Syracuse, NY, United States

2:27pm – Bioinspired Materials With Self-Adaptable

Mechanical Properties and Self-Regeneration by Coupling

Mechanics and Chemistry Using Soft Stimuli-Responsive

Scaffolds

Technical Presentation. IMECE2018-89038

Santiago Orrego, Urszula Krekora, Decheng Hou, Zhezhi

Chen, Eugene Kang, Sung Kang,

Johns Hopkins University,

Baltimore, MD, United States

2:48pm – Elasticity as the Basis of Allostery in DNA

Technical Presentation. IMECE2018-89049

Jaspreet Singh, Prashant K. Purohit,

University of

Pennsylvania, Philadelphia, PA, United States

3:09pm – Nonlinear Elasticity of Scale Covered Biomimetic

Substrate

Technical Presentation. IMECE2018-89900

Ranajay Ghosh, Hossein Ebrahimi, Hessein Ali, Ryan

Horton,

University of Central Florida, Orlando, FL, United

States

12-8 MULTI-SCALE COMPUTATIONS IN

FLUIDS, STRUCTURES, AND MATERIALS

12-8-2 Multi-Scale Computations in Fluids,

Structures, and Materials 2

Fourth Floor, David L. Lawrence Convention Center, Room 401

1:45pm–3:30pm

Session Chair: Yozo Mikata,

Bechtel, Niskayuna, NY, United

States

Session Co-Chairs: Glaucio Paulino,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States,

Yucheng Liu,

Mississippi State University, Mississippi State, MS, United

States

1:45pm – SH-Waves in 1D Phononic Metamaterials

Technical Presentation. IMECE2018-88301

Yozo Mikata,

Bechtel, Niskayuna, NY, United States

2:06pm – Thermodynamically Consistent and Physically

Motivated Finite Deformation Strain Gradient Plasticity

Framework

Invited Presentation. IMECE2018-89259

George Voyiadjis, Yooseob Song,

Louisiana State University,

Baton Rouge, LA, United States

2:48pm – Crystal Orientations Effects of Copper Single

Crystals Simulated by LAMMPS Employing Modiﬁed

Embedded Atomic Method

Technical Presentation. IMECE2018-86284

Yangqing Dou, Yucheng Liu, Mark Horstemeyer,

Mississippi

State University, Starkville, MS, United States

3:09pm – Quantiﬁcation of Material Degradation due to

Voids and Fiber Breakage in Composite Material

Technical Presentation. IMECE2018-89503

Vahid Tavaf, Mohammadsadegh Saadatzi, Sourav Banerjee,

University of South Carolina, Columbia, SC, United States

12-12 MECHANICS OF THIN-FILM AND

MULTI-LAYER STRUCTURES

12-12-2 Mechanics of Thin-Film and Multi-Layer

Structures

Fourth Floor, David L. Lawrence Convention Center, Room 404

1:45pm–3:30pm

Session Chair: Shuodao Wang,

Oklahoma State University,

Stillwater, OK, United States

1:45pm – Scaling Analyses for Mixed-Mode Transfer of 2D

Materials

Technical Presentation. IMECE2018-89425

Shruti Jain, Roger Bonnecaze, Kenneth Liechti,

University of

Texas at Austin, Austin, TX, United States

2:06pm – Modeling the Granular/Metal Multi-Layered

Structure of Lithium-Ion Batteries

Technical Presentation. IMECE2018-89467

Juner Zhu,

Massachusetts Institute of Technology, Cambridge,

MA, United States,

Wei Li, T

singhua University, Beijing, Beijing,

China,

Tomasz Wierzbicki,

Massachusetts Institute of

Technology, Cambridge, MA, United States

2:27pm – Thermal Shrinkage Behavior of Battery Separator

Technical Paper Publication. IMECE2018-86621

Shutian Yan,

Michigan State University, East Lansing, MI,

United States,

Jie Deng, Chulheung Bae,

Ford Motor

Company, Dearborn, MI, United States,

Xinran Xiao,

Michigan

State University, Lansing, MI, United States

2:48pm – Measuring Adhesion between SiO

and 2D

Titanium Carbides (MXenes)

Technical Presentation. IMECE2018-89405

Chenglin Wu, Yanxiao Li, Vadym Mochalin, Shuohan Huang,

Missouri University of Science and Technology, Rolla, MO,

United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

TUESDAY, NOVEMBER 

186

3:09pm – Use of a Trilayer Shell Model to Determine

Intrinsic Stress Within Titanium-Silicon Carbonitride

Coating

Technical Paper Publication. IMECE2018-87929

Anurag Chakraborty, Forest Thompson, Jason Ash, Phil

Ahrenkiel, Frank Kustas, Robert Anderson,

South Dakota

School of Mines & Technology, Rapid City, SD, United States

12-17 CONGRESS-WIDE SYMPOSIUM ON

ADDITIVE MANUFACTURING: FAILURE OF

ADDITIVELY MANUFACTURED

MATERIALS

12-17-1 Failure and Fracture of Additively

Manufactured Materials and Structures – 1

Third Floor, David L. Lawrence Convention Center, Room 335

1:45pm–3:30pm

Session Chair: H. Eliot Fang,

Sandia National Laboratories,

Albuquerque, NM, United States

Session Co-Chair: Ashfaq Adnan,

University of Texas at

Arlington, Arlington, TX, United States

1:45pm – Deformation and Failure of an Additively

Manufactured Casing With Optimized Graded Lattice Inﬁlls

Technical Presentation. IMECE2018-89126

Matthew Lynch,

United Technologies Research Center, East

Hartford, CT, United States,

Lin Cheng, Albert To,

University

of Pittsburgh, Pittsburgh, PA, United States

2:06pm – Deformation and Failure of an Additively

Manufactured Casing With Optimized Graded Lattice Inﬁlls

Part II

Technical Presentation. IMECE2018-90000

Matthew Lynch,

United Technologies Research Center, East

Hartford, CT, United States,

Lin Cheng, Albert To,

University

of Pittsburgh, Pittsburgh, PA, United States

2:27pm – Topology Optimization Design of Transmission

Structure in Flapping-Wing Micro Aerial Vehicle via 3D

Printing

Technical Presentation. IMECE2018-88787

Zuyong Chen, Jianghao Wu,

Beihang University, Beijing,

Beijing, China

2:48pm – Predicting Performance and Failure in Additively

Manufactured Stainless Steel Parts

Technical Presentation. IMECE2018-89336

Kyle L. Johnson, John M. Emery, Chris I. Hammetter, Judith

A. Brown, Spencer Grange, Kurtis R. Ford, Joseph Bishop,

Sandia National Laboratories, Albuquerque, NM, United States

3:09pm – Prediction of Failure for Multi-Phase Composites

Fabricated via Multi-Material 3D Printing

Technical Presentation. IMECE2018-90039

Yaning Li, Lei Lui, Richard Nash,

University of New

Hampshire, Durham, NH, United States

12-28 INSTABILITIES IN SOLIDS AND

STRUCTURES

12-28-5 Instabilities in Solids and Structures: Phase

Transformations/Transitions and Multi-Stability

Third Floor, David L. Lawrence Convention Center, Room 338

1:45pm–3:30pm

Session Chair: Katia Bertoldi,

Harvard University, Cambridge,

MA, United States

Session Co-Chair: Hiro Tanaka,

Osaka University, Osaka,

Japan

1:45pm – Effect of Phase Transformation on the Stability of

Pseudoelastic NiTi Tubes Under Bending

Technical Presentation. IMECE2018-89095

Karlos Kazinakis, Stelios Kyriakides, Chad Landis,

University of Texas at Austin, Austin, TX, United States

2:06pm – Instability and Self-Folding of One-Dimensional

Nanomaterials by Liquid Evaporation

Technical Presentation. IMECE2018-89107

Qingchang Liu, Baoxing Xu,

University of Virginia,

Charlottesville, VA, United States

2:27pm – Propagation of Non-Linear Waves in 2D

Mechanical Metamaterials Based on Bistable Shallow

Arches

Technical Pr

esentation. IMECE2018-89431

Gabriele Librandi,

Harvard University, Cambridge, MA, United

States,

Eleonora Tubaldi,

University of Arizona, Tucson, AZ,

United States,

Katia Bertoldi,

Harvard University, Cambridge,

MA, United States

2:48pm – Elastic and Viscoelastic Transition Responses of

Speciﬁc Repetitive Structural Systems Subjected to

Uniaxial Compressive Loading

Technical Presentation. IMECE2018-88760

Hiro Tanaka, Kazutoshi Hamada, Gakuto Yamanokuchi,

Yoji Shibutani,

Osaka University, Osaka, Japan

12-31 MECHANICAL METAMATERIALS

12-31-1 Design of Mechanical Metamaterials

Fourth Floor, David L. Lawrence Convention Center, Room 402

1:45pm–3:30pm

Session Chair: Jongmin Shim,

University at Buffalo, State

University of New York, Buffalo, NY, United States

Session Co-Chair: Jie Yin,

Temple University, Haverford, PA,

United States

1:45pm – Computational Design of Multistable Prismatic

Architected Materials

Invited Presentation. IMECE2018-89021

Johannes T.B. Overvelde, Agustin Iniguez-Rabago,

AMOLF,

Amsterdam, Netherlands

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

TUESDAY, NOVEMBER 

187

2:27pm – Accelerated Search and Design for Stretchable

Graphene Kirigami Using Machine Learning

Technical Presentation. IMECE2018-88956

Harold Park,

Boston University, Brookline, MA, United States,

Paul Hanakata,

Boston University, Boston, MA, United States,

Ekin Cubuk,

Google Brain, Mountain View, CA, United States,

David Campbell,

Boston University, Boston, MA, United

States

2:48pm – Heterogeneously Architected Meta-Structures by

Mechanics Design

Technical Presentation. IMECE2018-89033

Baoxing Xu,

University of Virginia, Charlottesville, VA, United

States

3:09pm – 3D Construction of a Tilted Cuboid Mechanical

Metamaterial

Technical Paper Publication. IMECE2018-87050

Yunfang Yang, Zhong You,

University of Oxford, Oxford,

United Kingdom

12-39 DRUCKER MEDAL SYMPOSIUM

12-39-2 Drucker Medal Symposium

Fourth Floor, David L. Lawrence Convention Center, Room 403

1:45pm–3:30pm

Session Chair: Wei Cai,

Stanford University, Stanford, CA,

United States

1:45pm – Is There a Universal Exponent for the Activation

Energy of Dislocation Nucleation?

Technical Presentation. IMECE2018-89587

Christopher Weinberger, Anik H.M. Faisal,

Colorado State

University, Fort Collins, CO, United States

2:06pm – A Phase Field Model for Brittle Fracture Based on

Homogenization

Technical Presentation. IMECE2018-89188

Yongxing Shen, Cheng Cheng,

Shanghai Jiao Tong

University, Shanghai, China

2:27pm – Architecture in Biological Materials: A Template

for Toughness Enhancement or a Siren Song?

Technical Presentation. IMECE2018-89885

Haneesh Kesari,

Brown University, Providence, RI, United

States

2:48pm – Dislocation Dynamics Simulations of Materials

With Complex Physics

Technical Presentation. IMECE2018-89319

Sylvie Aubry,

Lawrence Livermore National Laboratory,

Livermore, CA, United States

3:09pm – Probing Defect-Controlled Plasticity at Small

Scale via Multiscale Discrete Defect Element Method

Technical Presentation. IMECE2018-89502

Ill Ryu,

University of Texas at Dallas, Richardson, TX, United

States, T

aejoon Park,

Ohio State University, Columbus, OH,

United States,

Cuong Nguyen,

University of Texas at Dallas,

Richardson, TX, United States,

Farhang Pourboghrat,

Ohio

State University, Columbus, OH, United States

12-1 MECHANICS OF SOFT MATERIALS

12-1-6 Mechanics of Soft Materials: Electro/

Magneto/Chemo-Mechanics

Third Floor, David L. Lawrence Convention Center, Room 336

3:45pm–5:30pm

Session Chair: Robert L. Lowe,

University of Dayton, Dayton,

OH, United States

3:45pm – The Effect of Terfenol-D Particles on the

Electroactive Properties of PVDF-TrFE Composites

Technical Presentation. IMECE2018-89969

Scott Newacheck, George Youssef,

San Diego State

University, San Diego, CA, United States

4:00pm – Micro-Mechanical Model for Thermo-Oxidative

Aging of Elastomers

Technical Paper Publication. IMECE2018-88109

Hamid Mohammadi, Roozbeh Dargazany,

Michigan State

University, East Lansing, MI, United States

4:15pm – Chemo-Mechanically Coupled Constitutive Model

for High Temperature Oxidation in Polymers

Technical Presentation. IMECE2018-89009

Shabnam Konica, Trisha Sain,

Michigan Technological

University, Houghton, MI, United States

4:30pm – Adaptable Liquid Crystal Elastomers With

Transesteriﬁcation-Based Bond Exchange Reactions

Technical Presentation. IMECE2018-89235

Kai Yu,

University of Colorado Denver, Denver, CO, United

States

4:45pm – Large-Strain Constitutive Modeling of Soft

Multiferroic Magnetoelectric Materials

Technical Presentation. IMECE2018-89583

Robert L. Lowe, Hafez Tari,

University of Dayton, Dayton, OH,

United States

5:00pm – Modeling Hysteresis in Magneto/Electro-Active,

Soft Elastomeric, and Shape Memory Materials

Technical Presentation. IMECE2018-89647

Hafez Tari,

University of Dayton, Dayton, OH, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

TUESDAY, NOVEMBER 

188

12-8 MULTI-SCALE COMPUTATIONS IN

FLUIDS, STRUCTURES, AND MATERIALS

12-8-3 Multi-Scale Computations in Fluids,

Structures, and Materials 3

Fourth Floor, David L. Lawrence Convention Center, Room 401

3:45pm–5:30pm

Session Chair: Yozo Mikata,

Bechtel, Niskayuna, NY, United

States

Session Co-Chairs: Glaucio Paulino,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States,

Huijuan Zhao,

Clemson University, Clemson, SC, United States,

Ahmad

Naja,

Drexel University, Philadelphia, PA, United States

3:45pm – Multi-Scale Design of Periodic Nonlinear

Materials Using a Gradient-Based Shape Optimization

Technical Presentation. IMECE2018-88080

Ahmad Najaﬁ,

Drexel University, Philadelphia, PA, United

States,

Masoud Safdari,

University of Illinois at Urbana-

Champaign, Champaign, IL, United States

4:06pm – Constructal Approach for Stability Analysis of

Initially Twisted Beam Under Distributed Follower Forces

Technical Presentation. IMECE2018-88020

Shanae Powell, Ehsan Izadpanahi, Siavash Rastkar,

Florida

International University, Miami, FL, United States,

Pezhman

Mardanpour,

Florida International University, Weston, FL,

United States

4:27pm – Analysis of Parametric Uncertainty and Sensitivity

in Multi-Scale Modeling of Shock Response of a Pressed

Energetic Material

Technical Presentation. IMECE2018-89057

Sangyup Lee, Oishik Sen, Nirmal Kumar Rai, H.S.

Udaykumar,

University of Iowa, Iowa City, IA, United States

4:48pm – Molecular Dynamics Simulation on Fused Silica

Under Shock Impact

Technical Presentation. IMECE2018-89569

Huijuan Zhao,

Clemson University, Clemson, SC, United

States

5:09pm – Development and Computational Analysis

Evaluation of Miscible Fluids Into a Flow Mixer

Technical Presentation. IMECE2018-89048

Jeniffer A.M. Lopes, Altibano Ortenzi,

Londrina State

University, Londrina, Paran, Brazil

12-12 MECHANICS OF THIN-FILM AND

MULTI-LAYER STRUCTURES

12-12-3 Mechanics of Thin-Film and Multi-Layer

Structures

Fourth Floor, David L. Lawrence Convention Center, Room 404

3:45pm–5:30pm

Session Chair: Shuodao Wang,

Oklahoma State University,

Stillwater, OK, United States

3:45pm – Composite Fabric Blankets for Plastic Gears

Technical Paper Publication. IMECE2018-86074

Hany Ghoneim, Alfonso Fuentes-Aznar, Sachin Kini,

Rochester Institute of Technology, Rochester, NY, United States

4:00pm – Vacancy Engineering and Phase Transformation

in Zirconium Thin Films

Technical Presentation. IMECE2018-86351

Zahabul Islam, Baoming Wang,

Pennsylvania State

University, State College, PA, United States,

Md. Haque,

Pennsylvania State University, University Park, PA, United

States

4:15pm – Numerical Prediction of Fatigue Life of Composite

Hybrid Joint

Technical Presentation. IMECE2018-89913

Shah Alam, Vishveshwara Chitturi,

Texas A&M University -

Kingsville, Kingsville, TX, United States

4:30pm – Indentation-Induced Deformation and Damage in

Metal-Ceramic Multilayer Thin Films

Technical Presentation. IMECE2018-86239

Yu-Lin Shen,

University of New Mexico, Albuquerque, NM,

United States

4:45pm – Experimental Research on Tensile and Tearing of

Thin-Wall Polymer Scraps of End-of-Life Vehicles and

Household Appliances

Technical Paper Publication. IMECE2018-86036

Jianxiong Liu,

Kunming University of Science and Technology,

Kunming, Yunnan, China,

Anmin Chang,

Valmont Industries

(China) Ltd., Shanghai, Shanghai, China,

Wei Liu,

Kunming

University of Science and Technology, Kunming, Yunnan, China

5:00pm – Finite Element Simulation of Cracks Propagation

in Rolling Contact Applications With and Without Coating

Applied in Industrial Field

Technical Paper Publication. IMECE2018-86308

Monzer Al Esber,

University of Balamand, Tripoli, Lebanon

North, Lebanon,

Gabi Nehme,

University of Balamand, El-

Koura, Lebanon North, Lebanon

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

TUESDAY, NOVEMBER 

189

12-13 RECENT ADVANCES AND

APPLICATIONS IN MESHFREE AND

PARTICLE METHODS

12-13-2 Recent Advances and Applications in

Meshfree and Particle Method

Third Floor, David L. Lawrence Convention Center, Room 338

3:45pm–5:30pm

Session Chair: C.T. Wu,

Livermore Software Technology

Corporation, Livermore, CA, United States

Session Co-Chair: Michael Hillman,

Pennsylvania State

University, University Park, PA, United States

3:45pm – Gradient Reproducing Kernel Collocation Method

for High Order PDEs

Technical Presentation. IMECE2018-88725

Sheng-Wei Chi, Ashkan Mahdavi,

University of Illinois at

Chicago, Chicago, IL, United States

4:00pm – A Coupled Immersed IGA-RKPM Formulation for

Air-Blast-Structure Interaction

Technical Presentation. IMECE2018-89855

Georgios Moutsanidis,

University of California, San Diego,

San Diego, CA, United States,

Yuri Bazilevs,

Brown University,

Providence, RI, United States

4:15pm – The Conforming Reproducing Kernel Method for

an Agile Design-to-Simulation Workﬂow

Technical Presentation. IMECE2018-90041

Jacob Koester,

Sandia National Laboratories, Albuquerque,

NM, United States,

Jiun-Shyan Chen,

University of California,

San Diego, La Jolla, CA, United States,

Michael Tupek, Scott

Mitchell, Joseph Bishop,

Sandia National Laboratories,

Albuquerque, NM, United States

4:30pm – A Conforming Reproducing Kernel Finite Volume

Method

Technical Presentation. IMECE2018-89884

Michael Hillman,

Pennsylvania State University, University

Park, PA, United States,

Saili Yang,

Pennsylvania State

University, State College, PA, United States

4:45pm – Advances in RVE Large Deformation Analysis of

Heterogeneous Structures Using an Immersed Particle

Modeling Method and Mechanistic Machine Learning

Technology

Technical Presentation. IMECE2018-88773

Zeliang Liu, C.T. W

Livermore Software Technology

Corporation, Livermore, CA, United States

5:00pm – A Comparison Between ANCF and SPH Methods

for Liquid Sloshing Problems

Technical Presentation. IMECE2018-89660

Mohammed Mujtaba Atif, Emanuele Grossi,

University of

Illinois at Chicago, Chicago, IL, United States

12-17 CONGRESS-WIDE SYMPOSIUM ON

ADDITIVE MANUFACTURING: FAILURE OF

ADDITIVELY MANUFACTURED

MATERIALS

12-17-2 Failure and Fracture of Additively

Manufactured Materials and Structures – 2

Third Floor, David L. Lawrence Convention Center, Room 335

3:45pm–5:30pm

Session Chair: Ashfaq Adnan,

University of Texas Arlington,

Arlington, TX, United States

Session Co-Chair: H. Eliot Fang,

Sandia National

Laboratories, Albuquerque, NM, United States

3:45pm – Role of Build Architecture and Loading Rate on

Quasi-Static and Dynamic Fracture Behaviors of Additively

Printed ABS Studied Using DIC

Technical Presentation. IMECE2018-87028

John P. Isaac, Hareesh Tippur,

Auburn University, Auburn,

AL, United States

4:06pm – Characterizing the Increase in Inter-Bead Bond

Strength of FDM Parts Due to Thermal Annealing

Technical Presentation. IMECE2018-89193

Rhugdhrivya Rane, Robert M. Taylor,

University of Texas at

Arlington, Arlington, TX, United States

4:27pm – AFM Analysis of Polybutadiene Distribution in the

Weld Zones of FDM-Printed ABS Dogbones

Technical Presentation. IMECE2018-89732

David Collinso

Northwestern University, Evanston, IL, United

States

4:48pm – Additive Manufacturing and Mechanical

Properties of Bonelike Ultra-Light Nanocomposite

Structures

Technical Presentation. IMECE2018-89773

Sheikh Ferdous,

University of Massachusetts Dartmouth,

Dartmouth, MA, United States,

Ashfaq Adnan, Sushma

Pothana,

University of Texas at Arlington, Arlington, TX, United

States

5:09pm – Thermal Modeling and Meltpool Monitoring of

Laser Melting of SS 17-4 PH

Technical Presentation. IMECE2018-89960

Adrian Lew,

Stanford University, Stanford, CA, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

TUESDAY, NOVEMBER 

190

12-31 MECHANICAL METAMATERIALS

12-31-2 Functionality of Mechanical Metamaterials

Fourth Floor, David L. Lawrence Convention Center, Room 402

3:45pm–5:30pm

Session Chair: Lifeng Wang,

Stony Brook University, Stony

Brook, NY, United States

Session Co-Chair: Jaehyung Ju,

Shanghai Jiao Tong

University, Shanghai, China

3:45pm – An Origami-Based Metamaterial With

Programmable Multi-Stability and Anisotropic Behavior

Technical Presentation. IMECE2018-87142

Soroush Kamrava,

Northeastern University, Allston, MA,

United States,

Ashkan Vaziri,

Northeastern University, Boston,

MA, United States

4:06pm – Pseudo-Bistable Mechanics of 3D-Printed

Metastructures And Metamaterials With Snap-Through

Instabilities

Technical Presentation. IMECE2018-89745

Julien Meaud, Kaikai Che,

Georgia Institute of Technology,

Atlanta, GA, United States

4:27pm – Temperature-Triggered Metamaterial Platforms

for Biomedical Applications

Technical Presentation. IMECE2018-89794

Sahab Babaee, Simo Pajovic, Ameya R. Kirtane, Jiuyun Shi,

Kaitlyn Hess, Ester Caffarel-Salvador, Joy E. Collins,

Siddartha T

amang, Aniket V. Wahane, Alison M. Hayward,

Hormoz Mazdiyasni, Giovanni Traverso, Robert Langer,

Massachusetts Institute of Technology, Cambridge, MA, United

States

4:48pm – Metabiomaterials Based on Minimal Surface

Skeletal Nets

Technical Presentation. IMECE2018-89302

Sebastien Callens, DeAmir Abbas Zadpoor,

Delft University

of Technology, Delft, Netherlands

5:09pm – Fabrication, Characterization and Mechanical

Behaviors of Three-Dimensional High-Entropy Alloy-

Polymer Composite Nanolattices

Technical Presentation. IMECE2018-89230

Xiaoyan Li, Xuan Zhang,

Tsinghua University, Beijing, China

12-39 DRUCKER MEDAL SYMPOSIUM

12-39-3 Drucker Medal Symposium

Fourth Floor, David L. Lawrence Convention Center, Room 403

3:45pm–5:30pm

Session Chair: Wei Cai,

Stanford University, Stanford, CA,

United States

3:45pm – Growth, Characterization and Modeling of Single

Crystalline and Bi-Crystalline Thin Films of Gold on

Amorphous Insulating Substrates

Technical Presentation. IMECE2018-89374

William Nix, Rui Yang, Rachel Traylor,

Stanford University,

Stanford, CA, United States,

Ill Ryu,

University of Texas at

Dallas, Richardson, TX, United States,

Jonathan Fan,

Stanford

University, Stanford, CA, United States

4:06pm – Mechanical Behavior of Solder Interconnects

Under High Current Density

Technical Presentation. IMECE2018-89121

Leon Keer,

Northwestern University, Evanston, IL, United

States,

Yao Yao,

Northwestern Polytechnical University, Xi’an,

China

4:27pm – Mechanics of Metallic Nanowires—Stress

Relaxation and Diffusion-Mediated Failure

Technical Presentation. IMECE2018-89385

Horacio D. Espinosa,

Northwestern University, Evanston, IL,

United States,

Wei Cai,

Stanford University, Stanford, CA,

United States,

Rajaprakash Ramachandramoorthy,

Northwestern University, Evanston, IL, United States,

Yanming Wang, Amin Aghaei,

Stanford University, Palo Alto,

CA, United States,

Gunther Richter,

Max Planck Institute,

Stuttgart, Germany

4:48pm – Mechanical Properties of Metallic Nanocubes:

Bimetallic Interfaces and Controlled Porosity

Technical Presentation. IMECE2018-89102

Wendy Gu,

Stanford University, Palo Alto, CA, United States,

Mehrdad Kiani, Radhika Patil, Wei Cai, Yifan Wang,

Stanford

University, Stanford, CA, United States

5:09pm – A New Type of Superelastic and Shape Memory

Materials: ThCr

-Structured Intermetallic Compound at

Small Length Scales

Technical Presentation. IMECE2018-90040

Seok-Woo Lee,

University of Connecticut, Storrs, CT, United

States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

TUESDAY, NOVEMBER 

191

WEDNESDAY, NOVEMBER 14

12-1 MECHANICS OF SOFT MATERIALS

12-1-7 Mechanics of Soft Materials: Characterization

Third Floor, David L. Lawrence Convention Center, Room 338

10:00am–11:45am

Session Chair: Qiming Wang,

University of Southern

California, Los Angeles, CA, United States

10:00am – Synchrotron In Situ Tomography Observation of

Damage Mechanism Transition in UV Aged Polyamide-6

Technical Presentation. IMECE2018-89616

Kenneth Noel Cundiff,

Texas A&M University, College Station,

TX, United States,

Yazid Madi,

Mines ParisTech, Paris, France,

Ahmed Amine Benzerga,

Texas A&M University, College

Station, TX, United States

10:21am – Limitations of Tensile Test for Modeling Complex

Deformations of Hyperelastic Materials

Technical Presentation. IMECE2018-89014

Kshitiz Upadhyay, Ghatu Subhash, Douglas Spearot,

University of Florida, Gainesville, FL, United States

10:42am – Novel AFM-Based Dynamic Indentation

Experiments to Capture Local Viscoelastic Mechanical

Property Distributions in Soft Heterogeneous Materials

Technical Presentation. IMECE2018-89653

Pavan Kolluru,

Duke University, Durham, NC, United States,

Matthew Eaton, David Collinson, David Delgado, Kenneth

Shull,

Northwestern University, Evanston, IL, United States,

Catherine Brinson,

Duke University, Durham, NC, United

States

11:03am – High Strain Rate Dynamic Behavior of

Mechanophore Embedded Silicone Elastomers

Technical Presentation. IMECE2018-89750

Logan Shannahan,

Army Research Laboratory, Aberdeen, MD,

United States,

James Berry,

SURVICE Engineering, Inc.,

Aberdeen Proving Ground, MD, United States,

Yangju Lin,

Meredith Barbee, Stephen Craig,

Duke University, Durham,

NC, United States,

Muge Fermen-Coker,

Army Research

Laboratory, Aberdeen Proving Ground, MD, United States

11:24am – Characterization of a Polyurea Microsphere

Reinforced Polyurea Matrix Composite

Technical Presentation. IMECE2018-89766

Sophia Do, George Youssef,

San Diego State University,

San Diego, CA, United States

12-4 MECHANICS OF ADHESION AND

FRICTION

12-4-1 Mechanics of Adhesion and Friction

Fourth Floor, David L. Lawrence Convention Center, Room 402

10:00am–11:45am

Session Chair: Jianliang Xiao,

University of Colorado Boulder,

Boulder, CO, United States

10:00am – Mechanics of Adhesion and Friction in 2D

Materials

Invited Presentation. IMECE2018-89143

Frank DelRio,

National Institute of Standards and Technology,

Louisville, CO, United States,

Bien-Cuong Tran Khac, Koo-

Hyun Chung,

University of Ulsan, Ulsan, Korea (Republic)

10:42am – Frictional Characteristics of Graphene Wrapped

Nanodiamond and Graphitized Nanodiamond Using

Molecular Dynamics Simulation

Technical Presentation. IMECE2018-89928

Srilok Srinivasan,

Iowa State University, Ames, IA, United

States,

Diana Berman,

University of North Texas, Denton, TX,

United States,

Ganesh Balasubramanian,

Lehigh University,

Bethlehem, PA, United States,

Subramanian K.R.S.

Sankaranarayanan,

Argonne National Laboratory, Lemont, IL,

United States,

Ali Erdemir,

Argonne National Laboratory,

Argonne, IL, United States,

Anirudha Sumant,

Argonne

National Laboratory, Lemont, IL, United States

11:03am – Nanoscale Probing of Interaction in Atomically

Thin Layered Materials

Technical Presentation. IMECE2018-88319

Hossein Rokni, Wei Lu,

University of Michigan, Ann Arbor, MI,

United States

11:24am – Atomic-Scale Tribology Elucidated by In Situ

Approaches

Technical Presentation. IMECE2018-89544

Robert W. Carpick,

University of Pennsylvania, Philadelphia,

PA, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

WEDNESDAY, NOVEMBER 

192

12-7 MULTISCALE MODELS AND

EXPERIMENTAL TECHNIQUES FOR

COMPOSITE MATERIALS AND

STRUCTURES

12-7-1 Multiscale Models and Experimental

Techniques for Composite Materials and Structures

Fourth Floor, David L. Lawrence Convention Center, Room 403

10:00am–11:45am

Session Chair: Dianyun Zhang,

University of Connecticut,

Storrs, CT, United States

10:00am – Damage Characterization of Carbon and Glass

Fiber Composite Plates Subjected to Low-Velocity Impact

Using Thermography

Technical Paper Publication. IMECE2018-86543

Khaled Al-Athel,

King Fahd University of Petroleum &

Minerals, Dhahran, Saudi Arabia,

Ahmed Alomari,

Saudi

Aramco, Dammam, Saudi Arabia,

Abul Fazal M. Arif,

King

Fahd University of Petroleum & Minerals, Dhahran, Saudi

Arabia

10:21am – Analysis of Coated Fibrous Multiferroic

Composites Subjected to Large Electric Driving Field

Technical Presentation. IMECE2018-86968

Sheng-hsiang Chen, Chien-hong Lin,

National Cheng Kung

University, Tainan, Taiwan

10:42am – Utility of 2D Finite Element Simulations for

Predicting Effective Thermomechanical Properties of

Particle-Reinforced Composites

Technical Paper Publication. IMECE2018-87031

Kamran Makarian,

Villanova University, Ardmore, PA, United

States,

Sridhar Santhanam,

Villanova University, Collegeville,

PA, United States

11:03am – Development of Novel Compact Compression

Specimen for Matrix Compression Damage Initiation and

Propagation Behavior in Fiber Reinforced Composites

Technical Paper Publication. IMECE2018-87106

Tim McKinley, Kevin Carpenter, John P. Parmigiani, O

regon

State University, Corvallis, OR, United States

11:24am – A Multi-Scale Processing Model for Predicting

Cure-Induced Residual Stress in Thermoset Composites

Technical Presentation. IMECE2018-89866

Weijia Chen, Dianyun Zhang,

University of Connecticut,

Storrs, CT, United States

12-12 MECHANICS OF THIN-FILM AND

MULTI-LAYER STRUCTURES

12-12-4 Mechanics of Thin-Film and Multi-Layer

Structures

Fourth Floor, David L. Lawrence Convention Center, Room 404

10:00am–11:45am

Session Chair: Shuodao Wang,

Oklahoma State University,

Stillwater, OK, United States

10:00am – An Analysis of Metal-Composite Hybrid Joint for

Static Loading

Technical Presentation. IMECE2018-89625

Shah Alam, Ulan Dakeev, Mohammad Saquib,

Texas A&M

University - Kingsville, Kingsville, TX, United States

10:21am – Effects of Plasticity on the Creping Process in

the Manufacturing of Tissue Paper

Technical Presentation. IMECE2018-89265

Kui Pan, A. Srikantha Phani, Sheldon Green,

University of

British Columbia, Vancouver, BC, Canada

10:42am – Experimental investigation Into Energy

Ampliﬁcation in Tri-Layer Polymer/Polymer Composites

Technical Presentation. IMECE2018-89958

George Youssef, Brian Wang,

San Diego State University, San

Diego, CA, United States

11:03am – Study on Dynamic Performance of the Non-

Circular Bearings Using Fourier Analysis

Technical Paper Publication. IMECE2018-88420

Jiale Tian, Baisong Yang, Lie Yu, Jian Zhou,

Xi’an Jiaotong

University, Xi’an, China

11:24am – Research on Topology Optimization of Level Set

Method Based on Incompatible Element

Technical Presentation. IMECE2018-88915

Dongyue Qu, Haibing Zhang, Jianan Xu, Qiang Chen,

Harbin

Engineering University, Harbin City, China

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

WEDNESDAY, NOVEMBER 

193

12-21 SYMPOSIUM ON MODELING OF THE

FRACTURE, FAILURE AND FATIGUE IN

SOLIDS

12-21-1 Fatigue Modeling in Engineering Materials

Fourth Floor, David L. Lawrence Convention Center, Room 405

10:00am–11:45am

Session Chair: Ke Li,

Schlumberger, Sugar Land, TX, United

States

Session Co-Chair: Huijuan Zhao,

Clemson University,

Clemson, SC, United States

10:00am – Characterizing the Fatigue Behavior of Wrought

Fe-Co-2V Using Experimental, Computational, and

Analytical Techniques

Technical Presentation. IMECE2018-89185

Matthew J. Mills,

University of California, Davis, Davis, CA,

United States,

Jacob Biddlecom,

Clemson University,

Clemson, SC, United States,

Benedict Pineyro,

Embry-Riddle

Aeronautical University, Daytona Beach, FL, United States,

Tariq Khraishi,

University of New Mexico, Albuquerque, NM,

United States,

Kyle L. Johnson, Scott Grutzik, Adam Brink,

Sandia National Laboratories, Albuquerque, NM, United States,

Matthew Brake,

Rice University, Houston, TX, United States

10:21am – Numerical Evaluation of Fatigue Crack Growth in

Ionomer Membrane Based on Plastically Dissipated Energy

Technical Presentation. IMECE2018-89674

Morshed Hasan,

University of Dealware, Newark, DE, United

States,

Jixin Chen,

Ford Motor Company, Dearborn, MI,

United States,

Anette Karlsson,

Cleveland State University,

Cleveland, OH, United States,

Michael Santare,

University of

Delaware, Newark, DE, United States

10:42am – Fatigue Life Prediction of Cold Rolled Rotary

Shouldered Threaded Connections

Technical Paper Publication. IMECE2018-87801

Fei Song, Michael Du, Ke Li,

Schlumberger, Sugar Land, TX,

United States

11:03am – Mechanics of Fatigue Failure of Aluminum

Center Crack Tension Specimens and Repair Using Low

Modulus Composite Patches

Technical Presentation. IMECE2018-87205

Hugh Bruck,

University of Maryland, College Park, MD, United

States,

Daniel Hart, Paul Lara,

NSWC Carderock, West

Bethesda, MD, United States

12-31 MECHANICAL METAMATERIALS

12-31-3 Mechanics of Mechanical Metamaterials

Fourth Floor, David L. Lawrence Convention Center, Room 401

10:00am–11:45am

Session Chair: Eduard Karpov,

University of Illinois at

Chicago, Glenview, IL, United States

Session Co-Chair: Sung Kang,

Johns Hopkins University,

Baltimore, MD, United States

10:00am – Auxetic Composite Metamaterials With

Enhanced Mechanical Properties

Technical Presentation. IMECE2018-89285

Lifeng Wang,

Stony Brook University, Stony Brook, NY, United

States

10:21am – Study on the Phononic Band-Structure of Soft

Granular Crystals

Technical Presentation. IMECE2018-89097

Nidhish Jain, Jongmin Shim,

University at Buffalo, State

University of New York, Buffalo, NY, United States

10:42am – Undulated Lattice Structures by Vertices—

Torsion for Elastic Wave Filtering

Technical Presentation. IMECE2018-89091

Zhihao Yuan, Jaehyung Ju,

Shanghai Jiao Tong University,

Shanghai, China

11:03am – Strain Energy Transformation Pathways in Highly

Nonlocal Mechanical Metamaterials

Technical Presentation. IMECE2018-89974

Eduard Karpov,

University of Illinois at Chicago, Glenview, IL,

United States,

Larry Danso, John Klein,

University of Illinois at

Chicago, Chicago, IL, United States

11:24am – Mimicking Pseudo-Elastic Behavior and Shape

Memory Effect Using Architectured Metamaterials

Technical Presentation. IMECE2018-87239

Yunlan Zhang, Mirian Velay, Kristiaan Hector,

Purdue

University, West Lafayette, IN, United States,

David Restrepo,

San Antonio University, San Antonio, TX, United States,

Nilesh Mankame,

General Motors Research & Development,

Warren, MI, United States,

Pablo Zavattieri,

Purdue University,

West Lafayette, IN, United States

12-1 MECHANICS OF SOFT MATERIALS

12-1-8 Mechanics of Soft Materials: Fracture,

Dissipation, and Self-Healing

Third Floor, David L. Lawrence Convention Center, Room 338

1:45pm–3:30pm

Session Chair: Aurelie Azoug,

Oklahoma State University,

Stillwater, OK, United States

1:45pm – Self-Healing Mechanics of Soft Polymers

Technical Presentation. IMECE2018-89726

Qiming Wang,

University of Southern California, Los Angeles,

CA, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

WEDNESDAY, NOVEMBER 

194

2:06pm – Material Sink Approach for Modeling Fracture of

Soft Solids

Technical Presentation. IMECE2018-89031

Konstantin Volokh,

Technion - Israel Institute of Technology,

Haifa, Israel

2:27pm – A Gradient Damage Model of Polydisperse

Polymers

Technical Presentation. IMECE2018-89388

Bin Li, Nikolaos Bouklas,

Cornell University, Ithaca, NY,

United States

2:48pm – Dissipations in Liquid Crystal Elastomers at the

Nematic-Isotropic Transition

Technical Presentation. IMECE2018-89590

Aurelie Azoug, Jeb Wallace,

Oklahoma State University,

Stillwater, OK, United States

3:09pm – Rehealable, Fully Recyclable and Malleable

Electronic Skin Enabled by Dynamic Covalent Thermoset

Nanocomposite

Technical Presentation. IMECE2018-89639

Zhanan Zou, Jianliang Xiao,

University of Colorado Boulder,

Boulder, CO, United States

12-4 MECHANICS OF ADHESION AND

FRICTION

12-4-2 Mechanics of Adhesion and Friction

Fourth Floor, David L. Lawrence Convention Center, Room 402

1:45pm–3:30pm

Session Chair: Chenglin Wu,

Missouri University of Science

and Technology, Rolla, MO, United States

1:45pm – Atomic Scale Friction in DNA Plectonemes

Technical Presentation. IMECE2018-89023

Prashant K. Purohit, Yifei Min,

University of Pennsylvania,

Philadelphia, PA, United States

2:06pm – Surface Roughness Dependent Adhesion: Finite

Element Modeling and Analysis

Technical Presentation. IMECE2018-89081

Weilin Deng, Haneesh Kesari,

Brown University, Providence,

RI, United States

2:27pm – Crater-enabled dry adhesion

Technical Presentation. IMECE2018-89209

Liu Wang, Kyoungho Ha, Shutao Qiao, Nanshu Lu,

University of Texas at Austin, Austin, TX, United States

2:48pm – Characterizing Adhesion of Silver Nano Wire

Graphene Composite in Multi-Layered Structure

Technical Presentation. IMECE2018-89403

henglin Wu, Yanxiao Li, Congjie Wei,

Missouri University of

Science and Technology, Rolla, MO, United States

3:09pm – Tunable Dry Adhesion of Elastomeric Posts

Enabled by Stiffness Tuning of Microﬂuidic Serpentine

Channel of LMPA

Technical Presentation. IMECE2018-89834

Amir Mohammadi Nasab,

University of Nevada, Reno, Reno,

NV, United States,

Patrick Stampﬂi,

NevadaNano, Sparks, NV,

United States,

Aoyi Luo, Kevin Turner,

University of

Pennsylvania, Philadelphia, PA, United States,

Wanliang Shan,

University of Nevada Reno, Reno, NV, United States

12-7 MULTISCALE MODELS AND

EXPERIMENTAL TECHNIQUES FOR

COMPOSITE MATERIALS AND

STR

UCTURES

12-7-2 Multiscale Models and Experimental

Techniques for Composite Materials and Structures

Fourth Floor, David L. Lawrence Convention Center, Room 403

1:45pm–3:30pm

Session Chair: Dianyun Zhang,

University of Connecticut,

Storrs, CT, United States

1:45pm – Effective Property Estimation of CMC

Minicomposites Considering Porosity

Technical Paper Publication. IMECE2018-87337

Abhilash M. Nagaraja, Suhasini Gururaja,

Indian Institute of

Science, Bangalore, Karnataka, India

2:06pm – Phantom-Element Technique for Periodic

Deformation Analysis of Plain Fabrics Using LS-DYNA

Technical Paper Publication. IMECE2018-87459

Hikaru Miyaki, Atsushi Sakuma,

Kyoto Institute of

Technology, Kyoto, Japan

2:27pm – Evaluation of Transverse Shear Moduli of

Composite Sandwich Beams Through Three-Point Bending

Tests

Technical Paper Publication. IMECE2018-87636

Ozgun Sener, Oguzhan Dede, Oguz Atalay,

Middle East

Technical University, Ankara, Turkey,

Mert Atasoy,

ASELSAN

Inc., Ankara, Turkey,

Altan Kayran,

Middle East Technical

University, Ankara, Turkey

2:48pm – A Combined CFD-Solid Finite Element Model to

Study the Mechanics of Sand Erosion Damage in Coated

Glass Fiber Reinforced Polymer

Technical Paper Publication. IMECE2018-87966

Mohamed Tawﬁk Eraky, Tarek Elmelegy, Mostafa Shazly,

Nabil Eltayeb,

British University in Egypt, Cairo, Egypt

3:09pm – Multiscale Simulation of Uni-Directional Carbon

Fiber Reinforced Polymer Composites

Technical Presentation. IMECE2018-89956

Mahsa Tajdari, Wing Liu,

Northwestern University, Evanston,

IL, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

WEDNESDAY, NOVEMBER 

195

12-21 SYMPOSIUM ON MODELING OF THE

FRACTURE, FAILURE AND FATIGUE IN

SOLIDS

12-21-2 Fracture Modeling in Engineering Materials

Fourth Floor, David L. Lawrence Convention Center, Room 405

1:45pm–3:30pm

Session Chair: Rui Zhang,

University of Texas at Dallas,

Richardson, TX, United States

Session Co-Chair: Qingda Yang,

University of Miami, Coral

Gables, FL, United States

1:45pm – 3D Augmented Finite Element Analysis of

Coupled Ply Cracking and Delamination in Curved

Composite Laminates

Technical Presentation. IMECE2018-89783

Qingda Yang,

University of Miami, Coral Gables, FL, United

States

2:06pm – Multiscale Fracture Simulation Based on Coupled

Space-Time Finite Element Method and Peridynamics

Technical Presentation. IMECE2018-89257

Rui Zhang, Shogo Wada, Clint Nicely, Qian Qian,

University

of Texas at Dallas, Richardson, TX, United States

2:27pm – Multiscale Virtual Testing and Validation of a

DARPA TuFF Material

Technical Presentation. IMECE2018-89767

Qingda Yang, Garret Nygren, Liang Wang, Ryan

Karkkainen,

University of Miami, Coral Gables, FL, United

States

2:48pm – Numerical Simulation of Lithiation Driven Phase-

Change and Fracture in Silicon

Technical Presentation. IMECE2018-89851

Ataollah Mesgarnejad, Alain Karma,

Northeastern University,

Boston, MA, United States

12-29 PERIDYNAMIC MODELING OF

MATERIALS—BEHAVIOR

12-29-1 Peridynamic Modelling and Analysis

Fourth Floor, David L. Lawrence Convention Center, Room 404

1:45pm–3:30pm

Session Chair: Hailong Chen,

University of Kentucky,

Lexington, KY, United States

Session Co-Chairs: Erdogan Madenci,

University of Arizona,

Tucson, AZ, United States,

Florin Bobaru,

University of

Nebraska–Lincoln, Lincoln, NE, United States

1:45pm – Study of Spurious Wave Reﬂection at the

Interface of Peridynamics and Finite Element Regions

Technical Paper Publication. IMECE2018-86129

Shank S. Kulkarni,

University of North Carolina at Charlotte,

Charlotte, NC, United States,

Xiaonan Wang,

ANSYS,

Cannonsburg, PA, United States,

Alireza Tabarraei,

University

of North Carolina at Charlotte, Charlotte, NC, United States

2:06pm – Peridynamic Modelling of Crack Nucleation

Technical Presentation. IMECE2018-88149

Sina Niazi, Florin Bobaru,

University of Nebraska–Lincoln,

Lincoln, NE, United States

2:27pm – Peridynamics as a Module in the MOOSE

Framework

Technical Presentation. IMECE2018-89098

Hailong Chen, University of Kentucky, Lexington, KY,

United States, Benjamin Spencer,

Idaho National Laboratory,

Idaho Falls, ID, United States

2:48pm – Peridynamic Unit Cell for Effective Properties of

Different Microstructure Scales

Technical Presentation. IMECE2018-89683

Erdogan Madenci,

University of Arizona, Tucson, AZ, United

States,

Atila Barut, Amin Yaghoobi,

Global Engineering

Research and Technologies, Tucson, AZ, United States,

Nam Phan,

Naval Air Systems Command (NAVAIR), Patuxent

River, MD, United States

12-31 MECHANICAL METAMATERIALS

12-31-4 Recongurable Mechanical Metamaterials

Fourth Floor, David L. Lawrence Convention Center, Room 401

1:45pm–3:30pm

Session Chair: Jie Yin,

Temple University, Haverford, PA,

United States

Session Co-Chair: Yaning Li,

University of New Hampshire,

Durham, NH, United States

1:45pm – The Connection Effect of a Snapology-Based

Modular Origami Structure on Its Reconﬁgurability

Technical Presentation. IMECE2018-89119

Kai Xiao, Jaehyung Ju,

Shanghai Jiao Tong University,

Shanghai, China

2:06pm – Design of Reconﬁgurable Kirigami Metamaterials

Technical Presentation. IMECE2018-89351

Yanbin Li, Yaoye Hong,

Temple University, Philadelphia, PA,

United States,

Jie Yin,

Temple University, Haverford, PA,

United States

2:27pm – Kirigami-Inspired Materials for Tunable

Mechanical and Adhesive Systems

Technical Presentation. IMECE2018-89798

Doh-Gyu Hwang, Katie Trent, Michael D. Bartlett,

Iowa State

University, Ames, IA, United States

2:48pm – Harnessing Multistable Kirigami for

Reconﬁgurable Mechanical Metamaterials

Technical Presentation. IMECE2018-89329

Yi Yang,

Boston University, Boston, MA, United States,

Marcelo Dias,

Aarhus University, Aarhus, Denmark,

Douglas

Holmes,

Boston University, Boston, MA, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

WEDNESDAY, NOVEMBER 

196

3:09pm – Geometric Role in Designing Pneumatically

Actuated Pattern-Transforming Metamaterials

Technical Presentation. IMECE2018-89368

Yuzhen Chen, Lihua Jin,

University of California, Los Angeles,

Los Angeles, CA, United States

12-4 MECHANICS OF ADHESION AND

FRICTION

12-4-3 Mechanics of Adhesion and Friction

Fourth Floor, David L. Lawrence Convention Center, Room 402

3:45pm–5:30pm

Session Chair: Brian Bush,

National Institute of Standards and

Technology, Gaithersburg, MD, United States

3:45pm – Rate Dependent Tensile and Shear Interactions

Between Silicon and Epoxy

Technical Presentation. IMECE2018-89461

Tianhao Yang, Rui Huang, Kenneth Liechti,

University of

Texas, Austin, TX, United States

4:06pm – Development of Empirical Asperity Contact Model

for Oil-Lubricated Friction Material

Technical Presentation. IMECE2018-88698

Hiral Haria,

Ford Motor Company, Farmington Hills, MI, United

States,

Yuji Fujii, Gregory M. Pietron,

Ford Motor Company,

Dearborn, MI, United States,

Masatoshi Miyagawa, Takahiro

Tsuchiya,

F.C.C. Co., Ltd., Hamamatsu-Shi, Shizuoka-Ken,

Japan,

Shinji Nakamura, Hiroya Miyoshi,

F.C.C. Co., Ltd.,

Livonia, MI, United States,

Shiyang Hou, Pengchuan Wang,

Nikolaos D. Katopodes, U

niversity of Michigan, Ann Arbor,

MI, United States

4:27pm – Interface-Derived Viscoelasticity

Technical Presentation. IMECE2018-88680

Deborah D.L. Chung,

University at Buffalo, State University of

New York, Buffalo, NY, United States

4:48pm – Adhesive Contact of a Weierstrass Surface Proﬁle

Technical Presentation. IMECE2018-86366

Harish Radhakrishnan, Sreekanth Akarapu,

ANSYS Inc.,

Houston, TX, United States

5:09pm – Experimental and Numerical Study of Contact

Mechanics of Bolted L-Brackets

Technical Presentation. IMECE2018-87033

Samet Emre Yilmaz,

FNSS Defence Systems Inc., Ankara,

Turkey,

Altan Kayran, Ercan Gurses, Demirkan Coker,

Middle East Technical University, Ankara, Turkey

12-5 QUANTITATIVE VISUALIZATION OF

FRACTURE AND FAILURE

12-5-1 Quantitative Visualization Related to Fracture

& Crack Growth Processes

Fourth Floor, David L. Lawrence Convention Center, Room 401

3:45pm–5:30pm

Session Chair: Leslie Lamberson,

Drexel University,

Philadelphia, PA, United States

Session Co-Chairs: Natasha Vermaak,

Lehigh University,

Bethlehem, PA, United States,

Ryan Berke,

Utah State

University, Logan, UT, United States,

Ali Ghahremaninezhad,

University of Miami, Coral Gables, FL, United States

3:45pm – Identifying the Crack Initiation Site in

Polycrystalline Nickel Through Surface Proﬁle Changes

Using Scanning White Light Interferometry (SWLI)

Technical Presentation. IMECE2018-87176

jalal fathi sola, Haiying Huang,

University of Texas at

Arlington, Arlington, TX, United States

4:06pm – Disappearance of Strengthened Micro Texture of

Modiﬁed 9Cr-1Mo Steel Caused by Stress-Induced

Acceleration of Atomic Diffusion at Elevated Temperatures

Technical Paper Publication. IMECE2018-87368

Yifan Luo, Hideo Miura,

Tohoku University, Sendai, Miyagi,

Japan

4:27pm – Observation of Cracking and Measurement of

Fracture Toughness in Graphite

Technical Presentation. IMECE2018-87962

Cheng Liu, Carl Cady, Bob Stevens,

Los Alamos National

Laboratory, Los Alamos, NM, United States

4:48pm – Crack Tip Fields and Location From Full Field

Molecular Dynamics Data

Technical Presentation. IMECE2018-88897

Mark Wilson, Michael Chandross, Scott Grutzik,

Sandia

National Laboratories, Albuquerque, NM, United States

5:09pm – Full-Field Quantitative Visualization of Impact

Induced Deformations and Stresses in Ceramics and Glass

Using Digital Gradient Sensing

Technical Presentation. IMECE2018-89035

Chengyun Miao, Hareesh Tippur,

Auburn University, Auburn,

AL, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

WEDNESDAY, NOVEMBER 

197

12-7 MULTISCALE MODELS AND

EXPERIMENTAL TECHNIQUES FOR

COMPOSITE MATERIALS AND

STRUCTURES

12-7-3 Multiscale Models and Experimental

Techniques for Composite Materials and Structures

Fourth Floor, David L. Lawrence Convention Center, Room 403

3:45pm–5:30pm

Session Chair: Dianyun Zhang,

University of Connecticut,

Storrs, CT, United States

3:45pm – Multiscale Reduced Order Modeling of Failure in

Composites Based on Discrete Interfaces

Technical Presentation. IMECE2018-88984

Caglar Oskay, Zimu Su, Berkcan Kapusuzoglu,

Vanderbilt

University, Nashville, TN, United States

4:06pm – Mesoscale Material Strength Characterization for

Use in Fracture Modeling

Technical Paper Publication. IMECE2018-88249

Katherine A. Acton,

University of St. Thomas, St. Paul, MN,

United States,

Bahador Bahmani,

University of Tennessee,

Knoxville, Tullahoma, TN, United States,

Reza Abedi,

University of Tennessee, Tullahoma, TN, United States

4:27pm – Multiscale Characterization of Fabrication

Defects and Their Effects in Composite Structures

Technical Presentation. IMECE2018-88541

Jim Lua,

Global Engineering and Materials, Inc., Kendall Park,

NJ, United States,

Xiaodong Cui, Ali Sadeghirad,

Global

Engineering and Materials, Inc., Princeton, NJ, United States,

Alden Hyde, Ling Liu,

Utah State University, Logan, UT, United

States

4:48pm – Nacre-Inspired Architected Interface Leads to

Structural Materials With Superior Mechanical Properties

Technical Presentation. IMECE2018-89379

Grace X. Gu,

University of California, Berkeley, Berkeley, CA,

United States,

Flavia Libonati,

Politecnico di Milano/MIT,

Cambridge, MA, United States,

Daly Wettermark, Markus

Buehler,

Massachusetts Institute of Technology, Cambridge,

MA, United States

12-21 SYMPOSIUM ON MODELING OF THE

FRACTURE, FAILURE AND FATIGUE IN

SOLIDS

12-21-3 Material Model and Fracture Theory

Development

Fourth Floor, David L. Lawrence Convention Center, Room 405

3:45pm–5:30pm

Session Chair: Alireza Amirkhizi,

University of Massachusetts,

Lowell, Lowell, MA, United States

Session Co-Chair: Kazem Alidoost,

University of Illinois at

Urbana-Champaign, Champaign, IL, United States

3:45pm – Energy Release Rate Approximation for Surface

Cracks in Three-Dimensional Domains Using the

Topological Derivative

Technical Presentation. IMECE2018-89429

Kazem Alidoost,

University of Illinois at Urbana-Champaign,

Champaign, IL, United States,

Meng Feng,

Massachusetts

Institute of Technology, Cambridge, MA, United States,

Philippe Geubelle, Daniel Tortorelli,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States

4:06pm – A Constitutive Model for Ductile and Brittle

Failures of Semicrystalline Polymers

Technical Presentation. IMECE2018-87750

Anu Tripathi, Susan Mantell, Jia-Liang Le,

University of

Minnesota, Twin Cities, MN, Minneapolis, MN, United States

4:27pm – Failure of Elastomeric Coatings Under Cavitation

Erosion

Technical Presentation. IMECE2018-88401

Alireza Amirkhizi, Vahidreza Alizadeh,

University of

Massachusetts, Lowell, Lowell, MA, United States

4:48pm – Structural Transitions in Torsionally Constrained

DNA and Their Dependence on Solution Electrostatics

Technical Presentation. IMECE2018-89050

Jaspreet Singh, Prashant K. Purohit,

University of

Pennsylvania, Philadelphia, PA, United States

12-26 MECHANICS OF SOFT MATERIALS

AND SOFT ROBOTS

12-26-1 Mechanics of Soft Materials and Soft

Robots

Third Floor, David L. Lawrence Convention Center, Room 338

3:45pm–5:30pm

Session Chair: Shaoxing Qu,

Zhejiang University, Hangzhou,

Zhejiang, China

3:45pm – Computational Mechanics Modeling of a

Continuum Soft Robot

Technical Presentation. IMECE2018-86141

Hongyan Yuan, Bahador Marzban, Richard Sperling,

University of Rhode Island, Kingston, RI, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

WEDNESDAY, NOVEMBER 

198

4:06pm – Numerical Simulation Tools for Data-Driven

Structural Design of Soft Robots

Technical Presentation. IMECE2018-87679

Mohammad Khalid Jawed, Weicheng Huang,

University of

California, Los Angeles, Los Angeles, CA, United States,

Xiaonan Huang, Carmel Majidi,

Carnegie Mellon University,

Pittsburgh, PA, United States

4:27pm – Constitutive Modeling of Property Evolution

During Photopolymerization and 3D Printing

Technical Presentation. IMECE2018-89216

Jiangtao Wu,

Georgia Institute of Technology, Atlanta, GA,

United States,

Zeang Zhao,

Peking University, Beijing, Beijing,

China,

H. Jerry Qi,

Georgia Institute of Technology, Atlanta,

GA, United States,

Daining Fang,

Beijing Institute of

Technology, Beijing, Beijing, China

4:48pm – Addictive Manufacturing: From 3D to 4D Printing

Invited Presentation. IMECE2018-89221

Daining Fang,

Peking University, Beijing, China,

Weili Song,

Haosen Chen,

Beijing Institute of Technology, Beijing, China,

Yihui Zhang,

Tsinghua University, Beijing, China,

H. Jerry Qi,

Georgia Institute of Technology, Atlanta, GA, United States

12-29 PERIDYNAMIC MODELING OF

MATERIALS? BEHAVIOR

12-29-2 Peridynamics for Composites, Fracture, and

Corrosion Damage

Fourth Floor, David L. Lawrence Convention Center, Room 404

3:45pm–5:30pm

Session Chair: Pablo Seleson,

Oak Ridge National Laboratory,

Oak Ridge, TN, United States

Session Co-Chair: Florin Bobaru,

University of Nebraska–

Lincoln, Lincoln, NE, United States

3:45pm – Anisotropy in Two-Dimensional and Plane

Elasticity Bond-Based Peridynamics

Technical Presentation. IMECE2018-89977

Jeremy Trageser, Pablo Seleson,

Oak Ridge National

Laboratory, Oak Ridge, TN, United States

4:06pm – Dynamic Fracture at an Interface: A Peridynamic

Analysis

Technical Presentation. IMECE2018-86933

Javad Mehrmashhadi, Quang Le, Florin Bobaru,

University

of Nebraska–Lincoln, Lincoln, NE, United States

4:27pm – Peridynamic Modeling of Intergranular Corrosion

Damage

Technical Presentation. IMECE2018-86728

Siavash Jafarzadeh,

University of Nebraska–Lincoln, Lincoln,

NE, United States,

Ziguang Chen,

Huazhong University of

Science and Technology, Wuhan, Hubei, China,

Florin Bobaru,

University of Nebraska–Lincoln, Lincoln, NE, United States

4:48pm – The Peridynamic Coupling of Fracture, Diffusion,

and Corrosion

Technical Presentation. IMECE2018-88250

Jiangming Zhao, Siavash Jafarzadeh,

University of

Nebraska–Lincoln, Lincoln, NE, United States,

Ziguang Chen,

Huazhong University of Science and Technology, Wuhan,

Hubei, China,

Florin Bobaru,

University of Nebraska–Lincoln,

Lincoln, NE, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

WEDNESDAY, NOVEMBER 

199

THURSDAY, NOVEMBER 15

12-2 3D PRINTED SOFT MATERIALS

12-2-1 3D Printing of Novel Materials

Third Floor, David L. Lawrence Convention Center, Room 333

8:55am–10:40am

Session Chair: Qiming Wang,

University of Southern

California, Los Angeles, CA, United States

8:55am – Multimaterial 3D Printing Toward Additive

Manufacturing Functional Devices Applications

Technical Presentation. IMECE2018-89212

H. Jerry Qi,

Georgia Institute of Technology, Atlanta, GA,

United States

9:37am – Physics and Mechanics in 3D Printing of

Advanced Functional Materials

Technical Presentation. IMECE2018-86275

Hyunwoo Yuk, Xuanhe Zhao,

Massachusetts Institute of

Technology, Cambridge, MA, United States

9:58am – Additive Manufacturing of Self-healing

Elastomers

Technical Presentation. IMECE2018-89815

Kun Hao Yu, Qiming Wang,

University of Southern California,

Los Angeles, CA, United States

9:48am – 3D Printing Soft Conductors Using Liquid Metals

Technical Presentation. IMECE2018-89916

Taylor Neumann, Michael D. Dickey,

North Carolina State

University, Raleigh, NC, United States

9:38am – Autonomous Actuation of 3D Printed Bistable

Beam-Based Structures

Technical Presentation. IMECE2018-88619

Yijie Jiang, Lucia M. Korpas, Jordan R. Raney,

University of

Pennsylvania, Philadelphia, PA, United States

9:59am – Ferromagnetic 4D Printing of Shape-

Programmable Soft Active Matter

Technical Presentation. IMECE2018-87182

Yoonho Kim, Hyunwoo Yuk, Ruike Zhao,

Massachusetts

Institute of Technology, Cambridge, MA, United States,

Shawn Chester,

New Jersey Institute of Technology, Newark,

NJ, United States,

Xuanhe Zhao,

Massachusetts Institute of

Technology, Cambridge, MA, United States

10:20am – Environmentally Responsive Composites Printed

by a Multi-Phase 3D Printer

Technical Presentation. IMECE2018-87376

Xiying Li, Jia Ming Zhang, Zhongyi Huang, Pengyu Lv, Xin

Yi, Huiling Duan,

Peking University, Beijing, China

12-3 MECHANICAL CHARACTERIZATION

IN EXTREME ENVIRONMENTS

12-3-1 Mechanical Characterization in Extreme

Environments I

Third Floor, David L. Lawrence Convention Center, Room 330

8:55am–10:40am

Session Chair: Owen Kingstedt,

University of Utah, Salt Lake

City, UT, United States

Session Co-Chairs: Natasha Vermaak,

Lehigh University,

Bethlehem, PA, United States,

Ryan Berke,

Utah State

University, Logan, UT, United States

8:55am – Amorphization in Boron Carbide: Experimental

and Computational Study

Invited Presentation. IMECE2018-89063

Ghatu Subhash, Amnaya Awasthi,

University of Florida,

Gainesville, FL, United States

9:37am – Finite Element Analysis of Thermal Shock

Resistance of Refractory Ceramic Composites

Technical Presentation. IMECE2018-87034

Kamran Makarian,

Villanova University, Ardmore, PA, United

States,

Sridhar Santhanam,

Villanova University, Collegeville,

PA, United States

9:58am – Experimental Evaluation of Effect of Temperature

on Puncture Resistance of Glass Fiber Reinforced

Polyester Composite

Technical Presentation. IMECE2018-88869

Saad Ahmed, Sanjeev Khanna,

University of Missouri,

Columbia, Columbia, MO, United States

10:19am – High Density Grating Fabrication Techniques for

High-Temperature Deformation Measurement

Technical Presentation. IMECE2018-89130

Huimin Xie, Wei He, Bozhao Fan, Xianglu Dai,

Tsinghua

University, Beijing, China

12-14 ANISOTROPIC PLASTICITY OF

TEXTURED AND MICROSTRUCTURALLY

HETEROGENEOUS MATERIALS

12-14-1 Plastic Anisotropy Modeling

Room 331 8:55am–10:40am

Session Chair: H. Eliot Fang,

Sandia National Laboratories,

Albuquerque, NM, United States

Session Co-Chair: Oana Cazacu,

University of Florida,

Shalimar, FL, United States

8:55am – Continuum Description of Anisotropic Plasticity

Based on Lower Scales

Invited Presentation. IMECE2018-86236

Frederic Barlat,

POSTECH, Pohang, Gyeongbuk, Korea

(Republic)

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

THURSDAY, NOVEMBER 

200

9:37am – A Quantitative Measure of Yield Surface

Curvature and Its Effects on Problems in Plasticity

Technical Presentation. IMECE2018-87637

William Scherzinger,

Sandia National Laboratories,

Albuquerque, NM, United States

9:58am – Aspects of Anisotropic Yield Model Form:

Calibration and Simulations

Technical Presentation. IMECE2018-87692

Edmundo Corona, William Scherzinger, Sharlotte L.B.

Kramer, Amanda Jones,

Sandia National Laboratories,

Albuquerque, NM, United States

10:19am – Exploration of Anisotropic Plasticity Models

Technical Presentation. IMECE2018-89602

Jake Ostien,

Sandia National Laboratories, Livermore, CA,

United States,

William Scherzinger, Brian Lester,

Sandia

National Laboratories, Albuquerque, NM, United States

12-25 MECHANICS AND DESIGN OF

CELLULAR MATERIALS

12-25-1 Mechanics and Design of Cellular Materials

Third Floor, David L. Lawrence Convention Center, Room 335

8:55am–10:40am

Session Chair: Muhammad Ali,

Ohio University, Athens, OH,

United States

8:55am – A Veriﬁed Non-Linear Regression Model for

Elastic Stiffness Estimates of Finite Composite Domains

Considering Combined Effects of Volume Fractions,

Shapes, Orientations, Locations, and Number of Multiple

Inclusions

Technical Paper Publication. IMECE2018-86231

Ilige Hage,

Notre Dame University-Louaize, Zouk Mosbeh,

Lebanon,

Charbel Seif,

American University of Beirut, Beirut,

Lebanon,

Remi Hage,

Notre Dame University-Louaize, Zouk

Mosbeh, Lebanon,

Ramsey Hamade,

American University of

Beirut, Beirut, Riad El Solh, Lebanon

9:16am – Control of Interfacial Crack Behavior via Internal

Lattices in 3D Printed Structures

Technical Presentation. IMECE2018-86563

Chengyang Mo, Jordan R. Raney,

University of Pennsylvania,

Philadelphia, PA, United States

9:37am – Study of Energy Absorption Characteristics of

Square Tube With Composite Cellular Core

Technical Paper Publication. IMECE2018-86916

Muhammad Ali, Eboreime Ohioma, Khairul Alam,

Ohio

University, Athens, OH, United States

9:58am – Effect of Discrete Sectional Bonding of Cellular

Core on Impact Performance of Square Tubes: A Finite

Element Study

Technical Paper Publication. IMECE2018-86921

Muhammad Ali, Eboreime Ohioma, Khairul Alam,

Ohio

University, Athens, OH, United States

10:19am – Perception Thresholding for Noise Removal in

Micrographs of Cellular Tissues Acquired by Fluorescence

Microscopy

Technical Paper Publication. IMECE2018-87231

Saad Manzur, Mohammad Shawon, Mahmuda Naznin,

Bangladesh University of Engineering & Technology, Dhaka,

Dhaka, Bangladesh,

Tanvir Faisal,

Northwestern University,

Chicago, IL, United States

12-26 MECHANICS OF SOFT MATERIALS

AND SOFT ROBOTS

12-26-2 Mechanics of Soft Materials and Soft

Robots

Third Floor, David L. Lawrence Convention Center, Room 320

8:55am–10:40am

Session Chair: Shaoxing Qu,

Zhejiang University, Hangzhou,

Zhejiang, China

8:55am – Soft Active Materials, Soft Machines, and

Mechanics

Technical Presentation. IMECE2018-89191

Shaoxing Qu,

Zhejiang University, Hangzhou, Zhejiang, China

9:16am – Adhesive Tough Magnetic Hydrogels With High

Magnetic Nanoparticle Content

Technical Presentation. IMECE2018-89234

Xiaocheng Hu, Guodong Nian,

Zhejiang University,

Hangzhou, China

9:37am – Monolithic Dual-pH Responsive Copolymer

Actuator Inspired by Drosera

Technical Presentation. IMECE2018-89398

Zilong Han,

Zhejiang University, Hangzhou, China

9:58am – Programmable Wrinkling of Shape Memory

Polymers With Applications in Tunable Adhesion and

Nonuniform Optical Gratings

Technical Presentation. IMECE2018-89526

Yu Wang,

Houston Methodist Research Institute, Houston, TX,

United States,

Jianliang Xiao,

University of Colorado Boulder,

Boulder, CO, United States

10:19am – Tunable Dry Adhesion Through Static and

Dynamic Stiffness Tuning

Technical Presentation. IMECE2018-89968

Wanliang Shan,

University of Nevada Reno, Reno, NV, United

States,

Kevin Turner,

University of Pennsylvania, Philadelphia,

PA, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

THURSDAY, NOVEMBER 

201

12-27 MULTIFUNCTIONAL AND MICRO-/

NANO-STRUCTURED MATERIALS:

MODELING AND CHARACTERIZATION

12-27-1 Multifunctional and Micro-/Nanostructured

Materials: Modeling and Characterization (I)

Third Floor, David L. Lawrence Convention Center, Room 336

8:55am–10:40am

Session Chair: Xin-Lin Gao,

Southern Methodist University,

Dallas, TX, United States

Session Co-Chair: Haifeng Zhao,

Chinese Academy of

Sciences, Beijing, China

8:55am – Numerical and Experimental Studies on the

Development of Variable Density Nanocomposites for

Structural Applications

Technical Paper Publication. IMECE2018-87252

Jayaram Pothnis,

Indian Institute of Science, Bangalore,

Karnataka, India,

Dinesh Kalyanasundaram,

Indian Institute of

Technology Delhi, New Delhi, Delhi, India,

Suhasini Gururaja,

Indian Institute of Science, Bangalore, Karnataka, India

9:16am – A New Method for Solving the Fission Gas

Diffusion Equation With Time-Varying Diffusion Coefﬁcient

and Source Term Considering Recrystallization of Fuel

Grains

Technical Presentation. IMECE2018-89576

Yunmei Zhao, Shurong Ding,

Fudan University, Shanghai,

China

9:37am – Mechanical Behavior of Microscale

Polycrystalline Silver Pillars

Technical Presentation. IMECE2018-86623

Sadeq Saleh,

Carnegie Mellon University, Pittsburgh, PA,

United States,

Mehdi Hamid, Hussein Zbib,

Washington State

University, Pullman, WA, United States,

Rahul Panat,

Carnegie

Mellon University, Pittsburgh, PA, United States

9:58am – Nanoscale Mechanical Characterization of

Graphene- and h-BN-Reinforced PMMA

Technical Presentation. IMECE2018-89654

Arab Hammadi, Zhizhong Dong, Bernard Kear, R

utgers,

Piscataway, NJ, United States,

Stephen Tse,

Rutgers, The

State University of New Jersey, Piscataway, NJ, United States,

Assimina Pelegri,

Rutgers, The State University of New

Jersey, East Brunswick, NJ, United States

12-2 3D PRINTED SOFT MATERIALS

12-2-2 Mechanics of 3D Printed Materials

Third Floor, David L. Lawrence Convention Center, Room 333

10:50am–12:35pm

Session Chair: Kai Yu,

University of Colorado Denver, Denver,

CO, United States

10:50am – Additive Manufacturing and Architected

Materials

Technical Presentation. IMECE2018-89696

Christopher M. Spadaccini,

Lawrence Livermore National

Laboratory, Livermore, CA, United States

11:32am – Design of Active Smart Materials via Additive

Manufacturing: From Stimuli-Response to Self-Healing

Technical Presentation. IMECE2018-89742

Qiming Wang,

University of Southern California, Los Angeles,

CA, United States

11:53am – 12:14pm – 3D Printing of Electroactive Hydrogel

for Soft Robotic Manipulation and Locomotion

Technical Presentation. IMECE2018-89387

Daehoon Han, Cindy Farino, Chen Yang, Tracy Scott,

Daniel Browe,

Rutgers, The State University of New Jersey,

Piscataway, NJ, United States,

Wonjoon Choi,

Korea

University, Seoul, Korea (Republic),

Joseph Freeman,

Howon Lee,

Rutgers, The State University of New Jersey,

Piscataway, NJ, United States

12-3 MECHANICAL CHARACTERIZATION

IN EXTREME ENVIRONMENTS

12-3-2 Mechanical Characterization in Extreme

Environments II

Third Floor, David L. Lawrence Convention Center, Room 330

10:50am–12:35pm

Session Chair: Ryan Berke,

Utah State University, Logan, UT,

United States

Session Co-Chairs: Natasha Vermaak,

Lehigh University,

Bethlehem, PA, United States,

Owen Kingstedt,

University of

Utah, Salt Lake City, UT, United States

10:50am – Location-Speciﬁc Dynamic Response of As-Built

and Heat-Treated Laser Powder Bed Fusion Inconel 718

Technical Presentation. IMECE2018-89314

Nadia Kouraytem, RaphaÎl Chanut, Ashley Spear, Owen

Kingstedt,

University of Utah, Salt Lake City, UT, United States

11:11am – Experimental and Numerical Analyses of

Uniaxial Shakedown Behavior of 316 Stainless Steel

Technical Presentation. IMECE2018-89790

Ismail Soner Cinoglu, Ali Charbal, Natasha Vermaak,

Lehigh University, Bethlehem, PA, United States

11:32am – Numerical and Experimental Investigations of

Multiaxial Shakedown of Inconel 625 at High Temperature

Technical Presentation. IMECE2018-89812

Ali Charbal, Ismail Soner Cinoglu, Natasha Vermaak,

Lehigh University , P

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

THURSDAY, NOVEMBER 

202

11:53am – A Customized UV Lens for In Situ Measurements

at High Temperature and High Magniﬁcation

Technical Presentation. IMECE2018-90028

Robert Hansen, Adam Smith, Ren Voie, Ryan Berke,

Utah State University, Logan, UT, United States

12:14pm – Effect of Exposure Time on Ultraviolet DIC at

Extreme Temperatures

Technical Presentation. IMECE2018-90029

Thinh Thai, Robert Hansen, Adam Smith,

Utah State

University, Logan, UT, United States,

Paul Gradl,

NASA,

Huntsville, AL, United States,

Ryan Berke,

Utah State

University, Logan, UT, United States

12-14 ANISOTROPIC PLASTICITY OF

TEXTURED AND MICROSTRUCTURALLY

HETEROGENEOUS MATERIALS

12-14-2 Multi-Scale Modelling of Plastic Anisotropy

Third Floor, David L. Lawrence Convention Center, Room 331

10:50am–12:35pm

Session Chair: William Scherzinger,

Sandia National

Laboratories, Albuquerque, NM, United States

Session Co-Chair: Brian Lester,

Sandia National Laboratories,

Albuquerque, NM, United States

10:50am – Plastic Anisotropy of Mg Single Crystal: The

Effect of Slip and Twin

Technical Presentation. IMECE2018-86706

Soondo Kweon, Daniel Selvakum Raja,

Southern Illinois

University Edwardsville, Edwardsville, IL, United States

11:11am – The Relationship Between Average Grain Proﬁle

Heights and Plastic Strains in Nickel Polycrystals Under

Tensile Plastic Loading

Technical Paper Publication. IMECE2018-88197

Kranthi Balusu, Haiying Huang,

University of Texas at

Arlington, Arlington, TX, United States

11:32am – Multiscale Modeling of the Plastic Behavior

in Single Crystal Tungsten: From Atomistic to Crystal

Plasticity Simulations

Technical Presentation. IMECE2018-87626

David Cereceda,

Villanova University, Villanova, PA, United

States,

Martin Diehl, Franz Roters, Dierk Raabe,

Max-

Planck-Institut für Eisenforschung, Dusseldorf, Germany,

Jose Manuel Perlado,

Instituto de Fusion Nuclear, Madrid,

Spain,

Jaime Marian,

University of California, Los Angeles,

Los Angeles, CA, United States

11:53am – Plastic Anisotropy in Dynamic Impact Tests

of Single- and Polycrystalline Tantalum

Technical Presentation. IMECE2018-86499

Hojun Lim, Jay Carroll, Corbett Battaile,

Sandia National

Laboratories, Albuquerque, NM, United States,

Hyuk Jong

Bong,

Korean Institute of Material Science, Changwon, Korea

(Republic),

Shuh Rong Chen,

Los Alamos National Laboratory,

Los Alamos, NM, United States,

Matthew Lane,

Sandia

National Laboratories, Albuquerque, NM, United States

12:14pm – New Polycrystalline Modelling of Textured

Sheets

Technical Presentation. IMECE2018-86079

Nitin Chandola, Benoit Revil-Baudard, Oana Cazacu,

University of Florida, Shalimar, FL, United States

12-21 SYMPOSIUM ON MODELING OF THE

FRACTURE, FAILURE AND FATIGUE IN

SOLIDS

12-21-4 Meso-scale Modeling and Material Fracture

Characterization

Fourth Floor, David L. Lawrence Convention Center, Room 404

10:50am–12:35pm

Session Chair: Mohsen Asle Zaeem,

Colorado School of

Mines, Golden, CO, United States

Session Co-Chair: Xiaoyao Peng,

Carnegie Mellon University,

Pittsburgh, PA, United States

10:50am – A Phase Field Model of Dislocation Dynamics in

BCC Crystals

Technical Presentation. IMECE2018-89338

Xiaoyao Peng,

Carnegie Mellon University, Pittsburgh, PA,

United States,

Abigail Hunter,

Los Alamos National

Laboratory, Los Alamos, NM, United States,

Kaushik Dayal,

Carnegie Mellon University, Pittsburgh, PA, United States

11:11am – Phase Field Damage Modeling of Mechanical

Degradation in Polymers Under Hydro-Thermomechanical

Loading Conditions

Technical Presentation. IMECE2018-89456

Vinamra Agrawal,

Auburn University, Auburn, AL, United

States

11:32am – Quantitative Simulation of Crack Propagation

in Single-Phase and Composite Materials by a Modiﬁed

Phase-Field Model

Technical Presentation. IMECE2018-89051

Arezoo Emdadi,

Missouri University of Science and

Technology, Rolla, MO, United States,

Mohsen Asle Zaeem,

Colorado School of Mines, Golden, CO, United States

11:53am – Effective Toughness in Materials With Interfaces

Technical Presentation. IMECE2018-89149

Kaushik Vijaykumar, Haneesh Kesari,

Brown University,

Providence, RI, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

THURSDAY, NOVEMBER 

203

12-25 MECHANICS AND DESIGN OF

CELLULAR MATERIALS

12-25-2 Mechanics and Design of Cellular Materials

Third Floor, David L. Lawrence Convention Center, Room 335

10:50am–12:35pm

Session Chair: Muhammad Ali,

Ohio University, Athens, OH,

United States

10:50am – Investigation of Non-Pneumatic Tires Based on

Helical Hexagonal Cellular Structure

Technical Paper Publication. IMECE2018-87631

Mihir Mangesh Pewekar, Pranit Sandye, Kiran Chaudhari,

Rajiv Gandhi Institute of Technology, Mumbai, Maharashtra,

India

11:05am – Behavior of Soft 3D-Printed Auxetic Structures

Under Various Loading Conditions

Technical Paper Publication. IMECE2018-87859

Mahmoud Ardebili, Erik Chauca,

Borough of Manhattan

Community College/CUNY, New York, NY, United States,

Kerim Ikikardaslar,

CCNY/CUNY, New York, NY, United

States,

Feridun Delale,

City College of New York, New York,

NY, United States

11:20am – Phase Transitions in a Compressed CNT Forest

With Atomic Layer Deposition

Technical Presentation. IMECE2018-89020

Prashant K. Purohit,

University of Pennsylvania, Philadelphia,

PA, United States

11:35am – Unraveling the Mechanical Behavior of

Stochastic Cellular Materials at Intermediate Relative

Densities

Technical Presentation. IMECE2018-89528

Antonia Antoniou,

Georgia Institute of Technology, Atlanta,

GA, United States

11:50am – Mechanical Properties of a 3D Cellular Structure

With Semi-Closed Cells

Technical Presentation. IMECE2018-89619

Hassan Bahaloo,

Northeastern University, Boston, MA, United

States,

Masoud Olia,

Wentworth Institute of Technology,

Boston, MA, United States,

Hamid Nayeb Hashemi,

Northeastern University, Boston, MA, United States

12:05pm – 3D Printed Reconﬁgurable Hybrid Square

Lattices for Unique Pattern Transformation Under Bi-Axial

Compression

Technical Presentation. IMECE2018-90037

Yaning Li, Yunyao Jiang,

University of New Hampshire,

Durham, NH, United States

12-26 MECHANICS OF SOFT MATERIALS

AND SOFT ROBOTS

12-26-3 Mechanics of Soft Materials and Soft

Robots

Third Floor, David L. Lawrence Convention Center, Room 320

10:50am–12:35pm

Session Chair: Shaoxing Qu,

Zhejiang University, Hangzhou,

Zhejiang, China

10:50am – Impact of the Chamber Shape on a Soft Actuator

Mechanism to Mimic the Esophageal Swallowing Process

Technical Paper Publication. IMECE2018-86592

Alberto Caballero Ruiz, Juan Alejandro Hernandez Angulo,

Gabriel Ascanio Gasca, Leticia Vega Alvarado, Leopoldo

Ruiz Huerta,

Universidad Nacional Autûnoma de Mèxico,

Ciudad de Mèxico, Ciudad de Mèxico, Mexico,

Edmundo

Brito-de la Fuente,

Fresenius Kabi Deutschland GmbH, Bad

Homburg, Germany

11:11am – Integrated Curvature Sensing of Soft Bending

Actuators Using Inertial Measurement Units

Technical Paper Publication. IMECE2018-87104

Arthur Seibel, Lars Schiller,

Hamburg University of

Technology, Hamburg, Germany

11:32am – Chemomechanically Controlled Inhomogeneous

Large Deformation of a Bi-Layered Spherical Hydrogel

Technical Presentation. IMECE2018-89154

Huiming Wang

Zhejiang University, Hangzhou, China

11:53am – Different Mechanical Responses of Soft

Adhesion Layer by Partitioning and Initial Defects

Technical Presentation. IMECE2018-89233

Danming Zhong,

Zhejiang University, HangZhou, Zhejiang,

China

12:14pm – Effects of Defect Size on Cavitation In Gelatin

Technical Presentation. IMECE2018-89397

Yimou Fu,

Zhejiang University, Hangzhou, Zhejiang, China

12-27 MULTIFUNCTIONAL AND MICRO-/

NANO-STRUCTURED MATERIALS:

MODELING AND CHARACTERIZATION

12-27-2 Multifunctional and Micro-/Nano-Structured

Materials: Modeling and Characterization (II)

Third Floor, David L. Lawrence Convention Center, Room 336

10:50am–12:35pm

Session Chair: Xin-Lin Gao,

Southern Methodist University,

Dallas, TX, United States

Session Co-Chair: Vinu Unnikrishnan,

University of Alabama,

Tuscaloosa, AL, United States

10:50am – Modelling of Fracture Mechanisms at the

Nanoscale Using the Atomistic J-Integral

Invited Presentation. IMECE2018-89174

Samit Roy, Anubhav Roy,

University of Alabama, T

AL, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

THURSDAY, NOVEMBER 

204

11:32am – Inﬂuence of Strain States on the Thermal

Transport Properties of Single and Multiwalled Carbon

Nanostructures

Technical Paper Publication. IMECE2018-88620

Sushan Nakarmi, Vinu Unnikrishnan,

University of Alabama,

Tuscaloosa, AL, United States

11:53am – Study of Local Interfacial Dielectric Properties in

Polymer Nanodielectrics From First Principles

Technical Presentation. IMECE2018-88061

Yumeng Li,

University of Illinois at Urbana-Champaign,

Urbana, IL, United States

12:14pm – Band Gaps for Elastic Wave Propagation in a

Periodic Composite Beam Structure Incorporating Surface

Energy, Transverse Shear and Rotational Inertia Effects

Technical Paper Publication. IMECE2018-87236

Robert Gao,

Greenhill School, Addison, TX, United States,

Gongye Zhang, Tindaro Ioppolo,

Southern Methodist

University, Dallas, TX, United States

12-41 DYNAMIC FAILURE OF MATERIALS

AND STRUCTURES

12-41-1 Dynamic Failure of Materials and Structures

Third Floor, David L. Lawrence Convention Center, Room 321

10:50am–12:35pm

Session Chair: L. Roy Xu,

University of New Mexico,

Albuquerque, NM, United States

10:50am – Combining Nanoindentation Tests and

Computational Mechanics to Predict Impact Behavior of

Composite Laminates

Technical Presentation. IMECE2018-86601

L. Roy Xu,

University of New Mexico, Albuquerque, NM,

United States,

Mark Flores,

Air Force Research Laboratory,

Dayton, OH, United States

11:11am – Full Frontal Impact Comparison of Steel and

Carbon Fiber Composite Front Bumper Crush Can (FBCC)

Structures

Technical Paper Publication. IMECE2018-87110

Yash Dixit, Paul Begeman,

Wayne State University, Detroit,

MI, United States,

Golam Newaz,

Wayne State University, Ann

Arbor, MI, United States,

Derek Board,

Ford Motor Company,

Dearborn, MI, United States,

Yijung Chen,

Optimal CAE, Inc.,

Plymouth, MI, United States,

Omar Faruque,

Ford Motor

Company, Dearborn, MI, United States

11:32am – Adhesive Joints Under Impacting Shock Wave

Technical Paper Publication. IMECE2018-87855

Salih Yildiz, Yiannis Andreopoulos, Feridun Delale,

City College of New York, New York, NY, United States

11:53am – Comparison of Interfacial and Continuum

Models for Dynamic Fragmentation Analysis

Technical Paper Publication. IMECE2018-88294

Bahador Bahmani,

University of Tennessee, Knoxville,

Tullahoma, TN, United States,

Reza Abedi,

University of

Tennessee, Tullahoma, TN, United States,

Philip L. Clarke,

University of Tennessee, Knoxville, Tullahoma, TN, United

States

12-3 MECHANICAL CHARACTERIZATION

IN EXTREME ENVIRONMENTS

12-3-3 Mechanical Characterization in Extreme

Environments III

Third Floor, David L. Lawrence Convention Center, Room 330

2:05pm–3:50pm

Session Chair: Natasha Vermaak,

Lehigh University,

Bethlehem, PA, United States

Session Co-Chairs: Owen Kingstedt,

University of Utah,

Salt Lake City, UT, United States,

Ryan Berke,

Utah State

University, Logan, UT, United States

2:05pm – Low Temperature Seawater Effects on the

Mechanical, Fracture, and Dynamic Behavior of E-Glass

and Carbon Fiber Laminates

Technical Presentation. IMECE2018-90056

James LeBlanc, Paul Cavallaro, Jahn Torres, Eric Warner,

Andrew Hulton, Ryan Saenger, David Ponte,

Naval Undersea

Warfare Center, Newport, RI, United States

2:26pm – Development of a Single Walled Tank Under

Cryogenic Conditions Made of Composite

Technical Paper Publication. IMECE2018-86365

Philipp Werner Kutz, Frank Otremba, Jan Werner, Christian

Sklorz,

Bundesanstalt für Materialforschung und -prüfung,

Berlin, Berlin, Germany

2:47pm – Analysis of Temperature Field and Stress Field

on Brake Disc During Braking

Technical Paper Publication. IMECE2018-86767

Yu Liu, Xiandong Liu, Yingchun Shan, Tian He,

Beihang

University, Beijing, China

3:08pm – Material Properties of Hybridized Polymer Matrix

Composites at Sub-Ambient Temperatures

Technical Presentation. IMECE2018-89709

Matthew Mordasky, Xuemei Wang,

United Technologies

Research Center, East Hartford, CT, United States,

Paul Cavallaro,

Naval Undersea Warfare Center, Newport,

RI, United States,

Mahmoud M. Salama,

JPS Composite

Materials, Anderson, SC, United States

3:29pm – Mechanical Performance Analysis of ULTEM 9085

in a Heated, Irradiated Environment

Technical Paper Publication. IMECE2018-88181

Matthew Ng,

Pennsylvania State University, State College, P

United States,

Sean Brennan,

Pennsylvania State University

University Park, PA, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

THURSDAY, NOVEMBER 

205

12-14 ANISOTROPIC PLASTICITY OF

TEXTURED AND MICROSTRUCTURALLY

HETEROGENEOUS MATERIALS

12-14-3 Numerical Modeling With Applications to

Forming

Third Floor, David L. Lawrence Convention Center, Room 331

2:05pm–3:50pm

Session Chair: Nitin Chandola,

University of Florida, Shalimar,

FL, United States

Session Co-Chair: Oana Cazacu,

University of Florida,

Shalimar, FL, United States

2:05pm – Effect of the Ratio Between the Yield Stresses in

Uniaxial Tension and Pure Shear on the Size of the Plastic

Zone Near a Crack

Technical Presentation. IMECE2018-86083

Benoit Revil-Baudard, Oana Cazacu, Nitin Chandola,

University of Florida, Shalimar, FL, United States

2:26pm – Anisotropic Property of Dual-Phase Steel:

Measurement and Simulation

Technical Presentation. IMECE2018-89551

Xin Wu, Pengyan Lu, Qingyu Yang,

Wayne State University,

Detroit, MI, United States

2:47pm – Numerical Prediction of the Earing in the Cup

Drawing of an AA3104 Aluminum Alloy: Process Conditions

Versus Yield Criterion

Technical Presentation. IMECE2018-88998

Marta C. Oliveira, Pedro D. Barros, Diogo M. Neto,

University of Coimbra, Coimbra, Coimbra, Portugal,

Robert E.

Dick,

Alcoa Technical Center, New Kensington, PA, United

States,

Josè L. Alves,

University of Minho, Guimarães,

Portugal,

Luìs F. Menezes,

University of Coimbra, Coimbra,

Coimbra, Portugal

3:08pm – Plasticity-Damage Couplings in Polycrystalline

Materials: Importance of Consideration of the Speciﬁcities

of the Plastic Flow of the Matrix on the Mechanical

Response of Porous Solids

Technical Presentation. IMECE2018-86082

Benoit Revil-Baudard, Oana Cazacu,

University of Florida,

Shalimar, FL, United States

12-16 MULTISCALE MODELING AND

EXPERIMENTATION OF GEOMATERIALS

12-16-1 Multiscale Modeling and Experimentation of

Geomaterials

Third Floor, David L. Lawrence Convention Center, Room 333

2:05pm–3:50pm

Session Chair: Jesse Sherburn,

U.S. Army Engineer Research

and Development Center, Vicksburg, MS, United States

2:05pm – Mesoscale Finite Element Modeling of Concrete

Materials

Technical Presentation. IMECE2018-86267

William Lawrimore, Jay Shannon, M.Q. Chandler, Charles A.

Burchﬁeld, Zackery B. McClelland, R.D. Moser,

U.S. Army

Engineer Research and Development Center, Vicksburg, MS,

United States

2:26pm – Multi Scale Modeling of Rubber Friction on the

Rough Pavements Using Finite Element Method

Technical Presentation. IMECE2018-87724

Ashkan Nazari, Arash Nouri, Saied Taheri, Maryam Shakiba,

Sunish Vadakkeveetil,

Virginia Tech, Blacksburg, VA, United

States,

Mehran Shams Kondori,

Virginia Tech, Black, VA,

United States

2:47pm – Statistical Volume Elements for the

Characterization of Angle-Dependent Fracture Strengths

Technical Paper Publication. IMECE2018-88257

Justi

n Garrard,

University of Tennessee Space Institute,

Tullahoma, TN, United States,

Reza Abedi,

University of

Tennessee, Tullahoma, TN, United States,

Philip L. Clarke,

University of Tennessee Space Institute, Tullahoma, TN,

United States

3:08pm – Evaluation of a Computational Model for

Ultra-High Performance Concrete in Shear

Technical Presentation. IMECE2018-89022

Andrew Groeneveld, M.Q. Chandler, Robert Walker,

C. Kennan Crane,

U.S. Army Engineer Research and

Development Center, Vicksburg, MS, United States

12-20 MULTISCALE MECHANICS OF

DUCTILE FAILURE

12-20-1 Multiscale Mechanics of Ductile Failure

Third Floor, David L. Lawrence Convention Center, Room 334

2:05pm–3:50pm

Session Chair: Justin Wilkerson,

Texas A&M University,

College Station, TX, United States

2:05pm – How Plastic Anisotropy Inﬂuences Dynamic

Failure in Magnesium Alloys

Technical Presentation. IMECE2018-89751

Jeffrey Lloyd,

U.S. Army Research Laboratory, Aberdeen

Proving Ground, MD, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

THURSDAY, NOVEMBER 

206

2:26pm – Multiscale Mechanics of Ductile Damage in HCP

Materials

Technical Presentation. IMECE2018-89292

Padmeya Prashant Indurkar,

National University of

Singapore, Singapore, Singapore,

Shailendra Joshi,

University

of Houston, Houston, TX, United States

2:47pm – On the Orientation Dependence of Intergranular

Spall Failure

Technical Presentation. IMECE2018-89245

Justin Wilkerson, Thao Nguyen,

Texas A&M University,

College Station, TX, United States,

Darby Luscher,

Los

Alamos National Laboratory, Los Alamos, NM, United States

3:08pm – Dynamics of Necking and Ductile Fracture in

Porous Metals

Technical Presentation. IMECE2018-89284

Xinzhu Zheng,

Texas A&M University, College Station, TX,

United States,

Komi Espoir N’souglo,

University Carlos III of

Madrid, Leganès, Spain,

Shmuel Osovski,

Technion – Israeli

Institute of Technology, Haifa, Israel,

Jose Rodrìguez-

Martìnez,

University Carlos III of Madrid, Leganès, Spain,

Ankit Srivastava,

Texas A&M University, College Station, TX,

United States

3:29pm – A Comparative Study of the Dynamic

Fragmentation of Non-Linear Elastic and Elasto-Plastic

Rings

Technical Presentation. IMECE2018-89276

Alvaro Vaz Romero Santero, Jose Rodrìguez-Martìnez,

University Carlos III of Madrid, Leganès, Madrid, Spain,

Sèbastien Mercier, Alain Molinari,

University of Lorraine,

METZ, Lorraine, France

12-21 SYMPOSIUM ON MODELING OF THE

FRACTURE, FAILURE AND FATIGUE IN

SOLIDS

12-21-5 Uncertainty Modeling in Fracture and

Fatigue

Fourth Floor, David L. Lawrence Convention Center, Room 404

2:05pm–3:50pm

Session Chair: Sevan Goenezen,

Texas A&M University,

College Station, TX, United States

Session Co-Chair: Bahador Bahmani,

University of

Tennessee, Knoxville, Tullahoma, TN, United States

2:05pm – Accelerating Hierarchical Materials Discovery and

Design Through a Combined Machine Learning and

Experimental Framework

Technical Presentation. IMECE2018-89376

Grace X. Gu,

University of California, Berkeley, Berkeley, CA,

United States,

Chun-Teh Chen, Deon Richmond, Markus

Buehler,

Massachusetts Institute of Technology, Cambridge,

MA, United States

2:26pm – Establishing Uncertainty Quantiﬁcation and

Propagation Techniques Within a Process-Structure-

Property Framework for Uncertainty Informed Materials

Design and Development

Technical Presentation. IMECE2018-89201

Gary Whelan, David L. McDowell,

Georgia Institute of

Technology, Atlanta, GA, United States

2:47pm – An Integrated Approach for Statistical Microscale

Homogenization to Macroscopic Dynamic Fracture

Analysis

Technical Paper Publication. IMECE2018-88429

Bahador Bahmani,

University of Tennessee, Knoxville,

Tullahoma, TN, United States,

Ming Yang, Anand Nagarajan,

Ohio State University, Columbus, OH, United States,

Philip L.

Clarke,

University of Tennessee, Knoxville, Tullahoma, TN,

United States,

Soheil Soghrati,

Ohio State University, Dublin,

OH, United States,

Reza Abedi,

University of Tennessee,

Tullahoma, TN, United States

3:08pm – Utilizing Surface Displacement Fields From a

Digital Image Correlation System and Inverse Algorithms to

Map the Spatial Distribution of the Shear Modulus in 3D

Technical Presentation. IMECE2018-89889

Sevan Goenezen,

Texas A&M University, College Station, TX,

United States,

Yue Mei,

Swansea University, Swansea, United

Kingdom,

Ping Luo, Baik Jin Kim, Maulik Kotecha,

Texas

A&M University, College Station, TX, United States

12-26 MECHANICS OF SOFT MATERIALS

AND SOFT ROBOTS

12-26-4 Mechanics of Soft Materials and Soft

Robots

Third Floor, David L. Lawrence Convention Center, Room 320

2:05pm–3:50pm

Session Chair: Shaoxing Qu,

Zhejiang University, Hangzhou,

Zhejiang, China

2:05pm – Programmable Multi-Functional Soft Robot

Blends Into the Background

Technical Presentation. IMECE2018-89144

Zhanan Zou, Jianliang Xiao,

University of Colorado Boulder,

Boulder, CO, United States,

Kai Yu,

University of Colorado

Denver, Denver, CO, United States

2:26pm – Mechanics-Guided Design of Active Material:

Hard-Magnetic Soft Actuator

Technical Presentation. IMECE2018-89291

Ruike Zhao, Yoonho Kim,

Massachusetts Institute of

Technology, Cambridge, MA, United States,

Shawn Chester,

New Jersey Institute of Technology, North Caldwell, NJ, United

States,

Xuanhe Zhao,

Massachusetts Institute of Technology,

Cambridge, MA, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

THURSDAY, NOVEMBER 

207

2:47pm – Soft Electrically Actuated Actuators for

Untethered Soft Robots

Technical Presentation. IMECE2018-89644

Xiaonan Huang, Kitty Kumar,

Carnegie Mellon University,

Pittsburgh, PA, United States,

Mohammad Khalid Jawed,

University of California, Los Angeles, Los Angeles, CA, United

States,

Amir M. Nasab,

University of Nevada, Reno, Reno, NV,

United States,

Zisheng Ye,

Carnegie Mellon University,

Pittsburgh, PA, United States,

Wanliang Shan,

University of

Nevada Reno, Reno, NV, United States,

Carmel Majidi,

Carnegie Mellon University, Pittsburgh, PA, United States

3:08pm – A Soft Origami Robot Driven by Electrostatic

Forces

Technical Presentation. IMECE2018-89905

Jisen Li, Hareesh Godaba,

National University of Singapore,

Singapore, Singapore,

Zhiqian Zhang, Choon Chiang Foo,

Institute of High Performance Computing, Singapore,

Singapore,

Jian Zhu,

National University of Singapore,

Singapore, Singapore

3:29pm – A Thermosensitive Chameleon Hydrogel Fabric

With Fast Response, Good Reversibility and Adjustable

Temperature Sensitivity

Technical Presentation. IMECE2018-89273

Tonghao Wu, Tenghao Yin,

Zhejiang University, Hangzhou,

Zhejiang, China

12-27 MULTIFUNCTIONAL AND MICRO-/

NANO-STRUCTURED MATERIALS:

MODELING AND CHARACTERIZATION

12-27-3 Multifunctional and Micro-/Nano-structured

Materials: Modeling and Characterization (III)

Third Floor, David L. Lawrence Convention Center, Room 336

2:05pm–3:50pm

Session Chair: Xin-Lin Gao,

Southern Methodist University,

Dallas, TX, United States

2:05pm – Pave the Path for New Architectured Materials via

Multi-Material 3D Printing

Technical Presentation. IMECE2018-90036

Yaning Li,

University of New Hampshire, Durham, NH, United

States

2:26pm – Two Extended Versions of Hill’s Lemma Based on

the Modiﬁed Couple Stress Theory

Technical Presentation. IMECE2018-88198

Ahmad Gad, Xin-Lin Gao,

Southern Methodist University,

Dallas, TX, United States

2:47pm – Mechanically Mediated Asymmetric Thermal

Transports in in-Plane Heterostructures

Technical Presentation. IMECE2018-89065

Yuan Gao, Baoxing Xu

University of Virginia, Charlottesville,

VA, United States

3:08pm – Average Behavior of Nonlinear Magneto-Electro-

Elastic Particulate Composites

Technical Presentation. IMECE2018-86970

You-shu Zhan, Chien-hong Lin,

National Cheng Kung

University, Tainan, Taiwan

3:29pm – A Microstructure-Based Modeling Approach for

Electrostriction in Relaxor Ferroelectric Polymers

Technical Presentation. IMECE2018-89912

Anil Erol, Paris Von Lockette,

Pennsylvania State University,

University Park, PA, United States

12-30 SYMPOSIUM ON MULTIPHYICS

SIMULATIONS AND EXPERIMENTS FOR

SOLIDS

12-30-1 Symposium on Multiphyics Simulations and

Experiments for Solids

Third Floor, David L. Lawrence Convention Center, Room 335

2:05pm–3:50pm

Session Chair: Qian Qian,

University of Texas at Dallas,

Richardson, TX, United States

2:05pm – Multiscale, Data-Driven Process-Structure-

Property Modeling for Additive Manufacturing in Metals:

Part 1

Technical Presentation. IMECE2018-89263

Gregory Wagner, Zhengtao Gan, Yanping Lian, Wing Liu,

Northwestern University, Evanston, IL, United States

2:26pm – Multiscale, Data-Driven Process-Structure-

Property Modeling for Additive Manufacturing in Metals:

Part 2

Technical Presentation. IMECE2018-89264

Gregory Wagner, Zhengtao Gan, Yanping Lian, Wing Liu,

Northwestern University, Evanston, IL, United States

2:47pm – Inﬂuence of Lattice Mismatch and Nucleation

Anisotropy on Inoculating Efﬁciency at Various Cooling

Rates: Insights Into Grain Reﬁnement of Additively

Manufactured Metals

Technical Presentation. IMECE2018-89455

Zhuo Wang,

Mississippi State University, Starkville, MS,

United States,

Yaohong Xiao,

Mississippi State University,

Mississippi State, MS, United States,

Lei Chen,

Mississippi

State University, Starkville, MS, United States

3:08pm – Stress Corrosion Cracking Effects in a Rolled

Homogeneous Armor Steel Alloy

Technical Presentation. IMECE2018-89636

Brian Sprow,

Center for Advanced Vehicular Systems,

Starkville, MS, United States,

Luke Peterson,

Mississippi

State University, Starkville, MS, United States,

Lydia Jordan,

Center for Advanced Vehicular Systems, Starkville, MS, United

States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

THURSDAY, NOVEMBER 

208

3:29pm – A Multi-Temporal Scale Approach to

Thermomechanical Fatigue Failure Prediction

Technical Presentation. IMECE2018-89262

Rui Zhang,

University of Texas at Dallas, Richardson, TX,

United States,

Lihua Wen,

Northwestern Polytechnical

University, Xi’an, Shaanxi, China,

Qian Qian,

University of

Texas at Dallas, Richardson, TX, United States

12-41 DYNAMIC FAILURE OF MATERIALS

AND STRUCTURES

12-41-2 Dynamic Failure of Materials and Structures

Third Floor, David L. Lawrence Convention Center, Room 321

2:05pm–3:50pm

Session Chair: L. Roy Xu,

University of New Mexico,

Albuquerque, NM, United States

2:05pm – Couple Diffusion-Thermo-Mechanical Model for

Life Prediction of a Turbine Engine Blade

Technical Paper Publication. IMECE2018-88461

Samir Naboulsi,

AFRL - DSRC; Engility, Beavercreek, OH,

United States

2:26pm – Modeling of Dynamic Failure of Metals at the

Atomic Scales and the Mesoscales

Technical Presentation. IMECE2018-88749

Avinash Dongare,

University of Connecticut, Storrs, CT,

United States

2:47pm – Modeling on Fracture of Core-Shell Structured Si

Nanoparticles During Charging/Discharging Cycling

Technical Presentation. IMECE2018-89123

Xiang Gao, Jun Xu, Chunhao Yuan,

Beihang University,

Beijing, China

12-14 ANISOTROPIC PLASTICITY OF

TEXTURED AND MICROSTRUCTURALLY

HETEROGENEOUS MATERIALS

12-14-4 Experimental and Theoretical Models for

Anisotropic Plasticity and Fracture

Fourth Floor, David L. Lawrence Convention Center, Room 402

4:00pm–5:45pm

Session Chair: Oana Cazacu,

University of Florida, Shalimar,

FL, United States

Session Co-Chair: H. Eliot Fang,

Sandia National

Laboratories, Albuquerque, NM, United States

4:00pm – Anisotropic Fracture Criterion for Metals

Invited Presentation. IMECE2018-88780

Jeong Whan Yoon,

KAIST, Daejeon, Korea (Republic)

4:42pm – Theoretical and Numerical Formulation of an

Efﬁcient Anisotropic Distortional Hardening Model

Technical Presentation. IMECE2018-87968

Brian Lester, William Scherzinger,

Sandia National

Laboratories, Albuquerque, NM, United States

5:03pm – An Experimental Investigation on the Tensile

Deformation and Diffuse Necking of an Anisotropic Bar

Technical Presentation. IMECE2018-87893

Wei Tong, Xu Nie,

Southern Methodist University, Dallas, TX,

United States,

Bo Song,

Sandia National Laboratories,

Albuquerque, NM, United States

5:24pm – Prediction of Plastic Flow Localization With Shell

Element in Thick AHSS Sheets

Technical Presentation. IMECE2018-86535

Minsu Wi, JaeHyun Choi, Frederic Barlat,

Postech, Pohang,

Gyeongbuk, Korea (Republic)

12-16 MULTISCALE MODELING AND

EXPERIMENTATION OF GEOMATERIALS

12-16-2 Multiscale Modeling and Experimentation of

Geomaterials

Third Floor, David L. Lawrence Convention Center, Room 333

4:00pm–5:45pm

Session Chair: William Lawrimore,

U.S. Army Engineer

Research and Development Center, Vicksburg, MS, United

States

4:00pm – Failure Prediction Using Gibbs Formulation of

Granular Micromechanics

Technical Presentation. IMECE2018-89206

Anil Misra, Rizacan Sarikaya,

University of Kansas,

Lawrence, KS, United States, Payam Poorsolhjouy, Purdue

University, West Lafayette, IN, United States

4:21pm – New Penetration Models for Ballistic Clay

Incorporating Strain Hardening, Rate Dependence and

Temperature Effects

Technical Presentation. IMECE2018-89622

Yongqiang Li, Xin-Lin Gao, S

outhern Methodist University,

Dallas, TX, United States,

Adam Fournier,

Program Executive

Ofce - Soldier, Fort Belvoir, VA, United States,

Ricardo Vega,

NCI Inc., Fort Belvoir, VA, United States

4:42pm – Modeling of Ultra-High Performance Concrete

Flyer Plate Experiments

Technical Presentation. IMECE2018-89898

Jesse Sherburn, William F. Heard,

U.S. Army Engineer

Research and Development Center, Vicksburg, MS, United

States

5:03pm – Discrete Element Method Simulations of Fracture

in Concrete

Technical Presentation. IMECE2018-89966

T.W. Stone, Tyrone McDonald, Bohumir Jelinek,

Mississippi

State University, Starkville, MS, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

THURSDAY, NOVEMBER 

209

12-20 MULTISCALE MECHANICS OF

DUCTILE FAILURE

12-20-2 Multiscale Mechanics of Ductile Failure

Third Floor, David L. Lawrence Convention Center, Room 334

4:00pm–5:45pm

Session Chair: Justin Wilkerson,

Texas A&M University,

College Station, TX, United States

4:00pm – Modeling the Nucleation, Growth and

Coalescence Behavior of Voids During Spall Failure of Al

Microstructures at Mesoscales Using Quasi-Coarse-

Grained Dynamics (QCGD) Simulat

ions

Technical Presentation. IMECE2018-89921

Garvit Agarwal, Avinash Dongare,

University of Connecticut,

Storrs, CT, United States

4:21pm – Dynamic Failure of Nanostructured Metals With

Supersaturated Vacancies

Technical Presentation. IMECE2018-89901

Sara Adibi,

Texas A&M University, Austin, TX, United States,

Justin Wilkerson,

Texas A&M University, College Station, TX,

United States

4:42pm – Prediction of Strain Rate, Stress State, and

Temperature Dependent Plasticity and Damage Evolution

in an Aluminum 7085-T711 Alloy Using an Internal State

Variable Based Constitutive Model

Technical Presentation. IMECE2018-89318

Luke Peterson, Mark Horsteme

yer, Thomas E. Lacy,

Mississippi State University, Starkville, MS, United States

5:03pm – Ductile Fracture of Multiphase Steel Sheets

Under Bending

Technical Presentation. IMECE2018-89304

Yu Liu, Ankit Srivastava,

Texas A&M University, College

Station, TX, United States

5:24pm – Finite-Strain Homogenization Models for

Viscoplastic Polycrystals Incorporating Void Growth and

Texture Evolution

Technical Presentation. IMECE2018-89409

Shuvrangsu Das, Dawei Song, Pedro Ponte Castaòeda,

University of Pennsylvania, Philadelphia, PA, United States

12-26 MECHANICS OF SOFT MATERIALS

AND SOFT ROBOTS

12-26-5 Mechanics of Soft Materials and Soft

Robots

Third Floor, David L. Lawrence Convention Center, Room 320

4:00pm–5:45pm

Session Chair: Shaoxing Qu,

Zhejiang University, Hangzhou,

Zhejiang, China

4:00pm – Thin Film Electrostatic-Actuator-Based Soft

Robots

Technical Presentation. IMECE2018-89353

Congran Jin,

Dartmouth College, Hanover, NH, United States,

Jinhua Zhang,

Xi’an Jiaotong University, Xi’an, Shanxi, China,

Shicheng Huang, Ian Trase, Zhe Xu, John X.J. Zhang, Zi

Chen,

Dartmouth College, Hanover, NH, United States

4:21pm – Shape Controllable Soft Bilayer Pneumatic

Actuators

Technical Presentation. IMECE2018-89355

Yinding Chi,

Temple University, Philadelphia, PA, United

States,

Jie Yin,

Temple University, Haverford, PA, United States

4:42pm – Switchable Adhesion Actuator for Amphibious

Climbing Soft Robot

Technical Presentation. IMECE2018-89443

Yichao Tang,

Temple University, Philadelphia, PA, United

States,

Jie Yin,

Temple University, Haverford, PA, United States

5:03pm – Hybrid Liquid Metal-Microelectronics Sensor Skin

Integration for Soft Robots

Technical Presentation. IMECE2018-89643

Tess Hellebrekers, Kadri Bugra Ozutemiz, Jessica Yin,

Carmel Majidi,

Carnegie Mellon University, Pittsburgh, PA,

United States

5:24pm – Bioinspired Design of Thermally-Driven Vascular

Artiﬁcial Muscle

Technical Presentation. IMECE2018-89147

Shengqiang Cai,

University of California, San Diego, La Jolla,

CA, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

THURSDAY, NOVEMBER 

210

12-27 MULTIFUNCTIONAL AND MICRO-/

NANO-STRUCTURED MATERIALS:

MODELING AND CHARACTERIZATION

12-27-4 Multifunctional and Micro-/Nano-structured

Materials: Modeling and Characterization (IV)

Third Floor, David L. Lawrence Convention Center, Room 331

4:00pm–5:45pm

Session Chair: Xin-Lin Gao,

Southern Methodist University,

Dallas, TX, United States

Session Co-Chair: Haifeng Zhao,

Chinese Academy of

Sciences, Beijing, China

4:00pm – Simulation of Mouse Brain Tissue Under

Controlled Coritical Impact

Technical Paper Publication. IMECE2018-88790

Haifeng Zhao,

Chinese Academy of Sciences, Beijing, China,

Changxin Lai,

Shanghai Jiao Tong University, Shanghai, China,

Ke Wang,

Chinese Academy of Sciences, Beijing, China,

Suhao Qiu,

Shanghai Jiao Tong University, Shanghai, China,

Tianyao Wang,

The Fifth People’s Hospital of Shanghai,

Shanghai, China,

Wenheng Jiang,

Soochow University,

Shanghai, China,

Jun Liu,

The Fifth People’s Hospital of

Shanghai, Fudan University, Shanghia, China,

Xiangdong Li,

First Afliated Hospital of Soochow University, Shanghai,

China,

Jianfeng Zeng,

Soochow University, Suzhou, China,

Yuan Feng,

Shanghai Jiao Tong University, Shanghai, China

4:21pm – A Finite Element Approach for Study of Wave

Attenuation Characteristics of Epoxy Polymer Composite

Technical Paper Publication. IMECE2018-87873

Sha

nk S. Kulkarni, Alireza Tabarraei, Pratik Ghag,

University

of North Carolina at Charlotte, Charlotte, NC, United States

4:42pm – Dynamic Behavior of Cellular Graphene Aerogel

Technical Presentation. IMECE2018-89366

Zihao Yuan, Haifeng Zhao,

Chinese Academy of Sciences,

Beijing, China

5:03pm – Computational Modeling of Head Injuries Induced

by Golf Ball Impacts

Technical Presentation. IMECE2018-87229

Yongqiang Li, Xin-Lin Gao,

Southern Methodist University,

Dallas, TX, United States

12-30 SYMPOSIUM ON MULTIPHYICS

SIMULATIONS AND EXPERIMENTS FOR

SOLIDS

12-30-2 Symposium on Multiphyics Simulations and

Experiments for Solids

Third Floor, David L. Lawrence Convention Center, Room 335

4:00pm–5:45pm

Session Chair: Rui Zhang,

University of Texas at Dallas,

Richardson, TX, United States

4:00pm – Modeling the Behavior of Heterogeneous

Systems Subjected to the Coupled Effects of

Electromagnetic and Mechanical Fields

Technical Presentation. IMECE2018-89566

Mohamed Elbadry, Michael Steer, Mohammed Zikry,

North

Carolina State University, Raleigh, NC, United States

4:21pm – Modeling Nano-Architected Electrodes With

Elastic Instabilities: The Role of Buckling on

Electrochemical Performance

Technical Presentation. IMECE2018-89238

Claudio Di Leo, Arman Afshar,

Georgia Institute of

Technology, Atlanta, GA, United States,

Xiaoxing Xia, Julia R.

Greer,

California Institute of Technology, Pasadena, CA, United

States

4:42pm – Heat Built Up During Dynamic Mechanical

Analysis (DMA) Testing of Rubber Specimens

Technical Paper Publication. IMECE2018-88627

Roja Esmaeeli,

University of Akron, Akron, OH, United States,

Ashkan Nazari,

Virginia Tech, Blacksburg, VA, United States,

Haniph Aliniagerdroudbari, Seyed Reza Hashemi,

University

of Akron, Akron, OH, United States,

Muapper Alhadri, Waleed

Zakri, Siamak Farhad,

University of Akron, Akron, OH, United

States

5:03pm – Simulating Eddy Current Sensors in Blade Tip

Timing Application: Modeling and Experimental Validation

Technical Paper Publication. IMECE2018-87414

Nidhal Jamia, Michael I. Friswell,

Swansea University, Bay

Campus, Swansea, United Kingdom,

Sami El-Borgi, Prakash

Rajendran,

Texas A&M University at Qatar, Doha, Qatar

5:24pm – Mechanics of non-collagenous interfaces in bone

Technical Presentation. IMECE2018-89438

Yang Wang, Seyedreza Mosali,

University of Texas at Dallas,

Richardson, TX, United States,

Zhengwei Dai,

Jiaxing

University, Jiaxing, China,

Majid Minary, Qian Qian,

University

of Texas at Dallas, Richardson, TX, United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

THURSDAY, NOVEMBER 

211

12-32 HIGH-PERFORMANCE

NANOSTRUCTURAL MATERIALS AND

NANOCOMPOSITES

12-32-1 High-Performance Nanostructural Materials

and Nanocomposites

Third Floor, David L. Lawrence Convention Center, Room 321

4:00pm–5:45pm

Session Chair: Yuris Dzenis,

University of Nebraska, Lincoln,

NE, United States

4:00pm – Effect of Graphene on Mechanical Performance

of Pin-Loaded Circular Hole in Laminated Composites

Technical Paper Publication. IMECE2018-87566

Olanrewaju Aluko,

University of Michigan-Flint, Flint, MI,

United States

4:15pm – Atomistic Simulations of Mechanical Properties

of Circular and Collapsed Carbon Nanotubes With Covalent

Cross-Links

Technical Paper Publication. IMECE2018-88172

Alexey Volkov, Arun Thapa,

University of Alabama,

Tuscaloosa, AL, United States

4:30pm – Learning From Nature: Use Material Architecture

to Break the Performance Trade-Offs in Bulk Materials

Technical Presentation. IMECE2018-89685

Zian Jia,

Stonybrook University, Setauket, NY, United States,

Yang Yu,

Beijing Institute of Technology, Beijing, China,

Shaoyu Hou, Lifeng Wang,

Stony Brook University, Stony

Brook, NY, United States

4:45pm – Effect of Crystallizability on Mechanical

Properties of Continuous Polymer Nanoﬁbers

Technical Presentation. IMECE2018-89829

Yan Zou, Dimitry Papkov, Yuris Dzenis,

University of

Nebraska–Lincoln, Lincoln, NE, United States

5:00pm – Ultrastrong/Tough Continuous Bionanoﬁbers

Technical Presentation. IMECE2018-89847

Mohammad Andalib, Yuris Dzenis,

University of Nebraska–

Lincoln, Lincoln, NE, United States

5:15pm – Incorporating Electrospun Nanoﬁbers Into

Structural High-Temperature Nanocomposites

Technical Presentation. IMECE2018-89926

Taylor Stockdale, Dimitry Papkov, Mohammad N. Andalib,

Yuris Dzenis,

University of Nebraska–Lincoln, Lincoln, NE,

United States

TRACK  MECHANICS OF SOLIDS, STRUCTURES AND FLUIDS

–

THURSDAY, NOVEMBER 

212

13-1-1: General Topics of MEMS/NEMS

13-2-1: Micro- and Nano-Systems Engineering and Packaging Plenary I

13-2-2: Micro- and Nano-Systems Engineering and Packaging Plenary II

13-3-1: Design and Fabrication, Analysis, Processes, and Technology for Micro and

Nano Devices and Systems I

12-3-2: Design and Fabrication, Analysis, Processes, and Technology for Micro and

Nano Devices and Systems II

13-3-3: Design and Fabrication, Analysis, Processes, and Technology for Micro and

Nano Devices and Systems III

13-4-1: Computational Studies on MEMS and Nanostructures I

13-4-2: Computational Studies on MEMS and Nanostructures II

13-6-1: Micro/Nano Materials and Devices

13-7-1: Applied Mechanics and Materials I

13-7-2: Applied Mechanics and Materials II

-8-1: Electric Field Driven Microuidics

13-8-2: Microuidics in Bioengineering Applications

Track Organizers

Ioana Voiculescu,

City College of New

York, United States

Byoung Hee You,

Texas State University-

San Marcos, United States

Topic Organizers

Jong Hyun Choi,

Purdue University,

United States

Namwon Kim,

Texas State University,

United States

Aaron Mazzeo,

Rutgers, The State

University of New Jersey, United

States

Po-hao Huang,

University of Arkansas,

United States

Mohammed Mayeed,

Kennesaw State

University, United States

Grzegorz (Greg) Hader,

U.S. Army

RDECOM-ARDEC, United States

Ibrahim Alhomoudi,

King Abdulaziz City

for Science and Tech, Saudi Arabia

Daniel Kaplan,

U.S. Army RDECOM-

ARDEC, United States

Jungkyu Park,

Kennesaw State

University, United States

Ayse Tekes,

Kennesaw State University,

United States

Sathish Kumar Gurupatham,

Kennesaw

State University(formerly Southern

Polytechnic State University), United

States

Tonz Mahmood,

Zodiac Aerospace,

United States

Wei Xue,

Rowan University, United

States

Byungki Kim,

University of

Massachusetts, United States

Seok Kim,

University of Illinois at

Urbana-Champaign, United States

Jeong Tae Ok,

Midwestern State

University, United States

Ahsan Mian,

Wright State University,

United States

Awlad Hossain,

Eastern Washington

University, United States

Hongwei Sun,

University of

Massachusetts Lowell, United States

Michael Schertzer,

Rochester Institute of

Technology, United States

Mohammad Hossan,

University of

Central Oklahoma, United States

Session Organizers

Namwon Kim,

Texas State University,

United States

Ke Du,

Rochester Institute of

Technology, United States

Mitsuaki Kato,

Toshiba Corporation,

Japan

Zahabul Islam,

Pennsylvania State

University, United States

Wenbin Yu,

Purdue University, United

States

Ryan Pocratsky,

Carnegie Mellon

University, United States

Nazmul Islam,

University of Texas

Rio Grande Valley, United States

TRACK 13 MICRO- AND NANO-SYSTEMS

ENGINEERING AND PACKAGING

WEDNESDAY, NOVEMBER 14

13-2 PLENARY PRESENTATIONS IN

MEMS/NEMS ENGINEERING AND

PACKAGING

13-2-1 Micro- and Nano-Systems Engineering and

Packaging Plenary I

Third Floor, David L. Lawrence Convention Center, Room 301

9:00am–9:45am

9:00am – The Role of Arrayed Sensor Systems-on-Chip in

Next-Generation MEMS Inertial Sensing

Plenary Presentation. IMECE2018-90106

Gary Fedder,

Carnegie Mellon University, Pittsburgh, PA,

United States

13-3 DESIGN AND FABRICATION,

ANALYSIS, PROCESSES, AND TECHNOLOGY

FOR MICRO AND NANO DEVICES AND

SYSTEMS

13-3-1 Design and Fabrication, Analysis, Processes,

and Technology for Micro and Nano Devices and

Systems I

Fourth Floor, David L. Lawrence Convention Center, Room 406

10:00am–11:45am

Session Chair: Po-hao Huang,

University of Arkansas,

Fayetteville, AR, United States

10:00am – Rapid Preparation of BiOCl/BiOI for Degradation

of Tartrazine and Pharmaceuticals Under Simulated Solar

and LED Visible Light Irradiation

Technical Paper Publication. IMECE2018-86913

Ukoha Emekwo,

Purdue Water Institute/Purdue University

Northwest, Hammond, IN, United States,

A. G. Agwu Nnanna,

University of Texas of the Permian Basin, Odessa, TX, United

States,

John D. Vargo, Nicholas Baumhover,

State Hygienic

Laboratory at the University of Iowa, Coralville, IA, United

States

10:21am – Micro-Mechanical Punching by a Double-Sided

Hot Embossing Process

Technical Presentation. IMECE2018-89096

Devanda Lek, Joseph Miller, In-Hyouk Song,

Texas State

University, San Marcos, TX, United States,

Du Hwan Chun,

Yeungnam University, Gyongsan, Korea (Republic),

Byoung

Hee You,

Texas State University, San Marcos, TX, United

States

10:42am – Strain-Ampliﬁying Cellular Microstructure for

Flexible Piezo-Powered Actuator

Technical Presentation. IMECE2018-89556

E.J. Carron, R. Valery Roy,

University of Delaware, Newark,

DE, United States

11:03am – Fabrication of Hair-Like Surface Nanostructures

on Elastomeric Films for Highly Sensitive Resistive

Pressure sensors

Technical Presentation. IMECE2018-89934

Kwanoh Kim, Eunju Yeo, Minhee Son, Jae Sung Yoon,

Yeong-Eun Yoo, Jeong Hwan Kim, Doo-Sun Choi,

Korea

Institute of Machinery and Materials, Daejeon, Korea (Republic)

11:24am – Progress in Process Development of Tantalum

Thin Film as a Micro-/Nanoscale Structural Material

Technical Presentation. IMECE2018-89952

Longchang Ni, Ryan Pocratsky, Maarten De Boer,

Carnegie

Mellon University, Pittsburgh, PA, United States

13-3 DESIGN AND FABRICATION,

ANALYSIS, PROCESSES, AND TECHNOLOGY

FOR MICRO AND NANO DEVICES AND

SYSTEMS

13-3-2 Design and Fabrication, Analysis, Processes,

and Technology for Micro and Nano Devices and

Systems II

Fourth Floor, David L. Lawrence Convention Center, Room 406

1:45pm–3:30pm

Session Chair: Byoung Hee You,

Texas State University, San

Marcos, TX, United States

1:45pm – Methods of Mass-Flow Characterization of Water-

Glycol Mixtures Through Micro-/Nano-Channels

Technical Paper Publication. IMECE2018-87928

John B. Lee, Po-hao Huang,

University of Arkansas,

Fayetteville, AR, United States

2:06pm – Design and Fabrication of a Microﬂuidic Module

for Solid Phase Extraction of Nucleic Acids and Afﬁnity

Selection of Exosomes

Technical Presentation. IMECE2018-88293

Daniel Park,

Louisiana State University, Baton Rouge, LA,

United States,

J.M. Jackson, C.D.M. Campos, S.A. Soper,

University of Kansas, Lawrence, KS, United States,

Michael

Murphy,

Louisiana State University, Baton Rouge, LA, United

States

2:27pm – Fabrication of Optically Transparent,

Superhydrophobic Films on Plastic Surfaces From

Raspberry-Shaped Particles

Technical Presentation. IMECE2018-88462

Xiaoxiao Zhao, Daniel Park, Michael Murphy,

Louisiana

State University, Baton Rouge, LA, United States

2:48pm – Wormlike Micellar Solutions Passing Through a

Sudden Contraction Microchannel

Technical Presentation. IMECE2018-89345

Emad Jafari Nodoushan,

Texas State University, San Marcos,

TX, United States,

Taeil Yi,

Kyungnam University, Changwon,

Gyeongsangnam-do, Korea (Republic),

Young Ju Lee,

Namwon Kim,

Texas State University, San Marcos, TX, United

States

TRACK  MICRO AND NANOSYSTEMS ENGINEERING AND PACKAGING

–

WEDNESDAY, NOVEMBER 

213

3:09pm – Demonstrating the Potential of a Hybrid Model to

Increase the 360 Degrees Rotational Motion Freedom of

Ironless Permanent Magnet Planar Motors

Technical Paper Publication. IMECE2018-87007

Ding Yuan, Ming Zhang, Yu Zhu, Xin Li, Leijie Wang,

Tsinghua University, Beijing, China

13-4 COMPUTATIONAL STUDIES ON MEMS

AND NANOSTRUCTURES

13-4-1 Computational Studies on MEMS and

Nanostructures I

Fourth Floor, David L. Lawrence Convention Center, Room 406

3:45pm–5:30pm

Session Chair: Grzegorz (Greg) Hader,

U.S. Army RDECOM-

ARDEC, Picatinny Arsenal, NJ, United States

3:45pm – Effect of Polydispersity on the Morphology of

P3HT:PCBM Organic Solar Cells by Coarse-Grained

Molecular Simulations

Technical Presentation. IMECE2018-86439

Joydeep Munshi,

Lehigh University, Bethlehem, PA, United

States,

Wei Chen,

Northwestern University, Evanston, IL,

United States,

TeYu Chien,

University of Wyoming, Laramie,

WY, United States,

Ganesh Balasubramanian,

Lehigh

University, Bethlehem, PA, United States

4:06pm – Electrostatic Doping Based Graphene

Nanoribbon Tunneling Transistor: A Simulation Study

Technical Presentation. IMECE2018-86608

Weixiang Zhang,

University at Buffalo, State University of

New York, Buffalo, NY, United States,

Tarek Ragab,

Arkansas

State University, State University, AR, United States,

Cemal

Basaran,

University at Buffalo, State University of New York,

Buffalo, NY, United States

4:27pm – Biomimetic Membrane Simulation for Water

Desalination

Technical Paper Publication. IMECE2018-86664

Peter Oviroh, Rokhsareh Akbarzadeh, Tien-Chien Jen,

University of Johannesburg, Johannesburg, South Africa

4:48pm – Multiscale Modeling of PEEK Using Reactive

Molecular Dynamics Modeling and Micromechanics

Technical Presentation. IMECE2018-88935

Will Pisani, Matthew Radue,

Michigan Technological

University, Houghton, MI, United States,

Sorayot

Chinkanjanarot, N

ational Metals and Materials Technology

Center, Khlong Nueng, Pathum Thani, Thailand,

Brett A.

Bednarcyk, Evan Pineda,

NASA Glenn Research Center,

Cleveland, OH, United States,

Kevin Waters, Ravindra

Pandey, Julie King, Gregory Odegard,

Michigan

Technological University, Houghton, MI, United States

THURSDAY, NOVEMBER 15

13-2 PLENARY PRESENTATIONS IN

MEMS/NEMS ENGINEERING AND

PACKAGING

13-2-2 Micro- and Nano-Systems Engineering and

Packaging Plenary II

Third Floor, David L. Lawrence Convention Center, Room 303

8:00am–8:45am

8:00am – 2D Materials, Flexible Electrodes and Surfaces

Plenary Presentation. IMECE2018-90107

Eui-Hyeok Yang,

Stevens Institute of Technology, Hoboken,

NJ, United States

13-1 GENERAL TOPICS OF MEMS/NEMS

13-1-1 General Topics of MEMS/NEMS

Room 338 8:55am–10:40am

Session Chair: Jong Hyun Choi,

Purdue University, West

Lafayette, IN, United States

8:55am – Experimental and Thermal Investigation of Flow

Behavior in Mini Channel Heat Sink

Technical Presentation. IMECE2018-88924

Harshit M. Trivedi,

ITM Universe, Vadodara, Gujarat, India

9:16am – Preliminary Exploration of Cell-Based SAW

Detection for Water Toxicity

Technical Paper Publication. IMECE2018-86436

Kun-Lin Lee,

City College of New York, New York, NY, United

States,

Fang Li,

New York Institute of Technology, New York,

NY, United States,

Anis Nurashikin Nordin,

International

Islamic University Malaysia, Kuala Lumpur, Malaysia,

Ioana

Voiculescu,

City College of New York, New York, NY, United

States

9:37am – Mechanical Properties of 3D Printed Metals

Technical Paper Publication. IMECE2018-86310

Seyed Allameh,

Northern Kentucky University, Newport, KY,

United States,

Bailey Leininger, Brianna Harbin,

Northern

Kentucky University, Highland Heights, KY, United States

9:58am – Additively Manufactured Sensors and Heat

Exchangers for Gas Flow Using Novel Binder Jet

Processing

Technical Presentation. IMECE2018-89570

Xiaolu Huang, Truong Do, Tyler J. Bauder, Hawke Suen,

Patrick Kwon, Junghoon Yeom,

Michigan State University,

East Lansing, MI, United States

TRACK  MICRO AND NANOSYSTEMS ENGINEERING AND PACKAGING

–

WEDNESDAY, NOVEMBER  / THURSDAY, NOVEMBER 

214

13-4 COMPUTATIONAL STUDIES ON MEMS

AND NANOSTRUCTURES

13-4-2 Computational Studies on MEMS and

Nanostructures II

Fourth Floor, David L. Lawrence Convention Center, Room 401

10:50am–12:35pm

Session Chair: Grzegorz (Greg) Hader,

U.S. Army RDECOM-

ARDEC, Picatinny Arsenal, NJ, United States

10:50am – Micro-Cantilever Beam Battery for Measurement

of Viscosity in Extremely Small Volumes of Fluid

Invited Presentation. IMECE2018-86522

Amin Changizi,

Intelliquip, Breinigsville, PA, United States,

M. Amin Changizi,

Intelliquip, Bethlehem, PA, United States,

Ion Stiharu,

Concordia University, Montreal, Canada

11:32am – Simulation of Fluid Flow in a Microchannel at

Low Reynolds Number Using Dissipative Particle Dynamics

Technical Paper Publication. IMECE2018-87622

Waqas Waheed,

Khalifa University, Abu Dhabi, United Arab

Emir.,

Anas Alazzam,

Khalifa University of Science,

Technology & Research, Abu Dhabi, United Arab Emir.,

Ashraf

Al-Khateeb, Eiyad Abu-Nada,

Khalifa University, Abu Dhabi,

United Arab Emir.

11:53am – Capillary-Controlled Thermal Diode in

Heterogeneous Nanoporous Structures

Technical Presentation. IMECE2018-89713

Tadeh Avanessian, Gisuk Hwang, Evan Boutz,

Wichita State

University, Wichita, KS, United States

13-6 MICRO AND NANO DEVICES

13-6-1 Micro/Nano Materials and Devices

Third Floor, David L. Lawrence Convention Center, Room 338

10:50am–12:35pm

Session Chair: Ke Du,

Rochester Institute of Technology,

Rochester, NY, United States

10:50am – The Relationship Between Young’s Modulus and

the Dry Etching Rate of Polydimethylsiloxane (PDMS)

Technical Presentation. IMECE2018-89760

Matthew Fitzgerald, Sara Tsai, Yang Zhao, Deyu Li,

Vanderbilt University, Nashville, TN, United States

11:11am – A Scalabale Microﬂuidic Device for Switching

of Microparticles Using Dielectrophoresis

Technical Paper Publication. IMECE2018-87664

Waqas Waheed,

Khalifa University, Abu Dhabi, United Arab

Emir.,

Anas Alazzam,

Khalifa University of Science,

Technology & Research, Abu Dhabi, United Arab Emir.,

Bobby Mathew,

UAE University, Al Ain, Abu Dhabi, United

Arab Emir.,

Eiyad Abu-Nada, Ashraf Al-Khateeb,

Khalifa University, Abu Dhabi, United Arab Emir.

11:32am – Photosensitivity of Monolayer Graphene-Base

Field Effect Transistor

Technical Paper Publication. IMECE2018-87245

Jowes H. Goundar, T

ohoku University, Sendai, Japan,

Ken Suzuki, Hideo Miura,

Tohoku University, Sendai, Miyagi,

Japan

11:53am – Atomically-Precise Graphene Etch Masks for 3D

Integrated Systems From 2D Material Heterostructures

Technical Presentation. IMECE2018-87721

Jangyup Son, University of Illinois at Urbana-Champaign,

Urbana, IL, United States, Junyoung Kwon,

Yonsei

University, Seoul, Korea (Republic),

SunPhil Kim, Yinchun Lv,

Jaehyung Yu,

University of Illinois at Urbana-Champaign,

Urbana, IL, United States,

Jong-Young Lee, Huije Ryu,

Yonsei

University, Seoul, Korea (Republic),

Kenji Watanabe, Takashi

Taniguchi,

National Institute for Materials Science, Namiki,

Japan,

Rita Garrido-Menacho, Nadya Mason, Elif Ertekin,

Pinshane Huang,

University of Illinois at Urbana-Champaign,

Urbana, IL, United States,

Gwan-Hyoung Lee,

Yonsei

University, Seoul, Korea (Republic),

Arend van der Zande,

University of Illinois at Urbana-Champaign, Urbana, IL, United

States

13-7 APPLIED MECHANICS AND

MATERIALS IN MICRO- AND NANO-

SYSTEMS

13-7-1 Applied Mechanics and Materials I

Third Floor, David L. Lawrence Convention Center, Room 338

2:05pm–3:50pm

Session Chair: Mitsuaki Kato,

Toshiba Corporation,

Kawasaki-Shi, Japan

Session Co-Chair: Zahabul Islam,

Pennsylvania State

University, State College, PA, United States

2:05pm – Investigation of Moisture Damage Behavior of

Warm-Mix Asphalt (WMA) With Chemical WMA Additives

Towards Repeated Load-Deformation Analysis

Technical Paper Publication. IMECE2018-86273

Biswajit Bairgi, Raﬁqul A. Tarefder,

University of New

Mexico, Albuquerque, NM, United States

2:26pm – Strain Induced Grain Growth and Low

Temperature Annealing of Palladium Thin Film

Technical Presentation. IMECE2018-86352

Zahabul Islam,

Pennsylvania State University, State College,

PA, United States,

Md. Haque,

Pennsylvania State University,

University Park, PA, United States

2:47pm – Evaluation Method for Performance of SiC Power

Module by Electro-Thermal-Anisotropic Stress Coupled

Analysis

Technical Paper Publication. IMECE2018-86626

Mitsuaki Kato, Akihiro Goryu, Akira Kano, Kazuto Takao,

Kenji Hirohata,

Toshiba Corporation, Kawasaki, Japan,

Satoshi Izumi,

University of Tokyo, Bunkyo-ku, Japan

TRACK  MICRO AND NANOSYSTEMS ENGINEERING AND PACKAGING

–

THURSDAY, NOVEMBER 

215

3:08pm – Levy’s Solution for Strain Gradient Plates Under

Transverse Loading: Nonlocal Boundary Value Problems

Technical Presentation. IMECE2018-89427

Bishweshwar Babu, B.P. Patel,

Indian Institute of Technology

Delhi, New Delhi, Delhi, India

3:29pm – Natural Fibrous Catcher of Liquid

Technical Presentation. IMECE2018-89514

Moxiao Li, Tianjian Lu,

Xi’an Jiaotong University, Xi’an, China,

Feng Xu, Xi’an Jiaotong University/China, Shaanxi, China

13-8 MICROFLUIDICS IN MICRO- AND

NANOSYSTEMS

13-8-1 Electric Field Driven Microuidics

Fourth Floor, David L. Lawrence Convention Center, Room 405

2:05pm–3:50pm

Session Chair: Nazmul Islam,

University of Texas Rio Grande

Valley, Edinburg, TX, United States

2:05pm – Viscoelectric Effect on the Electroosmotic Flow

in Nanochannels With Heterogeneous Zeta Potentials

Technical Paper Publication. IMECE2018-86384

Edson M. Jimenez,

Universidad Nacional Autûnoma de

Mexico, Ciudad de Mexico, Mexico,

Juan P. Escandon,

Instituto Politecnico Nacional, SEPI-ESIME Unidad

Azcapotzalco, Cuidad de Mexico, Mexico,

Federico Mèndez,

Universidad Nacional Autûnoma de Mexico, Ciudad de Mexico,

Mexico

2:26pm – Improving the Micropump Velocity for Orthogonal

Electrode Pattern

Technical Paper Publication. IMECE2018-88629

Nazmul Islam, Rakesh Guduru, Chu-Wen Cheng,

University

of Texas Rio Grande Valley, Edinburg, TX, United States

2:47pm – Knudsen Pump Powered Micro-Hovercrafts

Technical Presentation. IMECE2018-89552

John Cortes, Christopher Stanczak, Igor Bargatin,

University of Pennsylvania, Philadelphia, PA, United States

3:08pm – Analysis of AC Electrokinetic Flow With Multiple

Electrodes by Direct Measurement of Velocity Fields

Technical Presentation. IMECE2018-89803

Tharun Srinivas Karnam Reddy, Choongbae Park,

Texas

A&M University–Kingsville, Kingsville, TX, United States

3:29pm – Magnetic Antibody Functionalized Carbon

Nanotube Ink for Rapid Printing of Biosensors

Technical Presentation. IMECE2018-89666

Sarah Mishriki, Abdel Rahman Abdel Fattah, Ahmed M.

Abdalla, Elvira Meleca, Fei Geng, Suvojit Ghosh, Ishwar K.

Puri,

McMaster University, Hamilton, ON, Canada

13-3 DESIGN AND FABRICATION,

ANALYSIS, PROCESSES, AND TECHNOLOGY

FOR MICRO AND NANO DEVICES AND

SYSTEMS

13-3-3 Design and Fabrication, Analysis, Processes,

and Technology for Micro and Nano Devices and

Systems III

Third Floor, David L. Lawrence Convention Center, Room 338

4:00pm–5:45pm

Session Chair: Namwon Kim,

Texas State University,

San Marcos, TX, United States

4:00pm – Design and Analysis of Electrostatically Actuated

Mechanical Sensor for Graphene

Technical Paper Publication. IMECE2018-86407

Ayse Tekes, Jungkyu Park,

Kennesaw State University,

Marietta, GA, United States

4:21pm – Mechanical, Electrical and Electro-Mechanical

Properties of CNTs/Carbon Black/ SEBS-Based TPE

Nanocomposites for Large Deformation Sensor

Applications

Technical Presentation. IMECE2018-86460

Xudong Yang, Lingyu Sun, Cheng Zhang, Bincheng Huang,

Beihang University, Beijing, China

4:42pm – 3D Numerical Model for Prediction of Percolation

Threshold and Piezoresistive Characteristics of Conductive

Polymer Filled With CNT

Technical Paper Publication. IMECE2018-86528

Jun Han, Lingyu Sun, Lijun Li,

Beihang University, Beijing,

China,

Taikun Wang,

Henan Key Laboratory of Underwater

Intelligent Equipment, Zhengzhou Electromechanical

Engineering, Zhengzhou, China,

Bincheng Huang, Xudong

Yang,

Beihang University, Beijing, China

5:03pm – Area-Arrayed Graphene Nano-Ribbon-Base Strain

Sensor

Technical Paper Publication. IMECE2018-87277

Ryohei Nakagawa, Zhi Wang, Ken Suzuki,

Tohoku University,

Sendai, Miyagi, Japan

5:24pm – Theoretical Study of Electronic Band Structure of

Dumbbell-Shape Graphene Nanoribbons for Highly-

Sensitive Strain Sensors

Technical Paper Publication. IMECE2018-88431

Qinqiang Zhang, Takuya Kudo, Ken Suzuki,

Tohoku

University, Sendai, Miyagi, Japan

TRACK  MICRO AND NANOSYSTEMS ENGINEERING AND PACKAGING

–

THURSDAY, NOVEMBER 

216

13-7 APPLIED MECHANICS AND

MATERIALS IN MICRO- AND NANO-

SYSTEMS

13-7-2 Applied Mechanics and Materials II

Fourth Floor, David L. Lawrence Convention Center, Room 405

4:00pm–5:45pm

Session Chair: Wenbin Yu,

Purdue University, West Lafayette,

IN, United States

Session Co-Chair: Ryan Pocratsky,

Carnegie Mellon

University, Pittsburgh, PA, United States

4:00pm – Development of a Flexible Tactile Sensor Using

Area-Arrayed Bundle Structures of Multi-Walled Carbon

Nanotubes

Technical Paper Publication. IMECE2018-87275

Ryusaku Osada, Ken Suzuki,

Tohoku University, Sendai,

Miyagi, Japan

4:21pm – Negative Poisson’s Ratio in Two-Dimensional

Honeycomb Structures

Technical Presentation. IMECE2018-89006

Guangzhao Qin,

University of South Carolina, Columbia, SC,

United States,

Zhenzhen Qin,

Zhengzhou University,

Zhengzhou, Henan, China

4:42pm – Multiscale Analysis of Multilayer Printed Circuit

Board Using Mechanics of Structure Genome

Technical Presentation. IMECE2018-89326

Fei Tao, Wenbin Yu,

Purdue University, West Lafayette, IN,

United States

5:03pm – A Test Chamber for Characterizing the Thermo-

Mechanical Properties of Thin Films Under Harsh

Conditions

Technical Presentation. IMECE2018-89764

Ryan Pocratsky, Longchang Ni, Prince Singh, Maarten De

Boer,

Carnegie Mellon University, Pittsburgh, PA, United States

13-8 MICROFLUIDICS IN MICRO- AND

NANOSYSTEMS

13-8-2 Microuidics in Bioengineering Applications

Third Floor, David L. Lawrence Convention Center, Room 336

4:00pm–5:45pm

Session Chair: Mohammad Hossan,

University of Central

Oklahoma, Edmond, OK, United States

4:00pm – Capillary Force Driven Single-Cell Spiking

Apparatus for Studying Circulating Tumor Cells

Technical Paper Publication. IMECE2018-87109

Jacob Amontree, Kangfu Chen, Jose Varillas, Z. Hugh Fan,

University of Florida, Gainesville, FL, United States

4:21pm – The Development and Characterization of a

“Store and Create” Microﬂuidic Device to Study Ice

Nucleation Particles

Technical Presentation. IMECE2018-89479

Thomas Brubaker,

Carnegie Mellon University, Pittsburgh,

PA, United States,

Michael Polen,

McDaniel College,

Pittsburgh, PA, United States,

Leif Jahn, Perry Cheng,

Vinay Ekambaram, Shelley Anna, Ryan Sullivan,

Carnegie

Mellon University, Pittsburgh, PA, United States

4:42pm – Deformable Shallow Microﬂuidics: Physics of the

Fluid Flow and Novel Particle Manipulation Platform for

Filtration, Isolation, and Controlled Release

Technical Presentation. IMECE2018-89655

Aryan Mehboudi, Junghoon Yeom,

Michigan State University,

East Lansing, MI, United States

5:03pm – A Novel Microﬂuidic Device for High-Throughput

Immobilization and Mechanostimulation of Small

Multicellular Organisms

Technical Presentation. IMECE2018-89718

Utku Sonmez, Ardon Z. Shorr, John S. Minden, Philip R.

LeDuc,

Carnegie Mellon University, Pittsburgh, PA, United

States

5:24pm – The Effect of Electric Field on Cell Functions

During DC Dielectrophoretic Cell Manipulation

Technical Presentation. IMECE2018-86949

Mohammad Hossan, Nicholas Walker, Melville Vaughan,

Amalie L. Moyna,

University of Central Oklahoma, Edmond,

OK, United States

TRACK  MICRO AND NANOSYSTEMS ENGINEERING AND PACKAGING

–

THURSDAY, NOVEMBER 

217

NOTES

218

Track Organizers

Zahra Sotoudeh,

Cal Poly Pomona, United States

Eleonora Tubaldi,

University of Arizona, United States

Topic Organizer

Eleonora Tubaldi,

University of Arizona, United States

TRACK 14 ASME INTERNATIONAL

UNDERGRADUATE RESEARCH AND DESIGN

EXPO (POSTERS ONLY)

SUNDAY, NOVEMBER 11

14-1 GENERAL

14-1-1

Exhibit Hall B 5:30pm–7:00pm

1. Effects of Forced Upstream Flow Fluctuations on Vortex

Shedding Intensity in a Normal Triangular Tube Array

Undergrad Expo. IMECE2018-88557

Kazybek Kassym, Aida Iskaliyeva, Luis Rojas-Solorzano,

Nazarbayev University, Astana, Astana, Kazakhstan

2. Design, Analysis and Realization of a Novel Compliant

Bistable Mechanism

Undergrad Expo. IMECE2018-88896

Hongkuan Lin, Niko Giannakakos, Ayse Tekes,

Kennesaw

State University, Marietta, GA, United States

3. Take Home Lab Equipment Design to Study Free

Response of Single DOF and 2 DOF Vibratory Mechanisms

Undergrad Expo. IMECE2018-88906

Zach Marr, Michael Weitzel, Ayse Tekes, Julia Ortiz,

Kennesaw State University, Marietta, GA, United States

4. Design and Analysis of a Novel Semi Compliant

Swashplate Mechanism

Undergrad Expo. IMECE2018-88927

Niko Giannakakos, Ayse Tekes, Adeel Khalid,

Kennesaw

State University, Marietta, GA, United States

5. Design, Analysis, Modeling and Experimental Validation

of Compliant Five Bar Mechanism

Undergrad Expo. IMECE2018-89085

Michael Weitzel, Ayse T

ekes,

Kennesaw State University,

Marietta, GA, United States

6. Design and Experimental Validation of a Large

Displacement Compliant Folded Beam Mechanism

Undergrad Expo. IMECE2018-89150

Hunter Horner, Sergio Canchola, Cody Delarosa, Ayse

Tekes,

Kennesaw State University, Marietta, GA, United States

7. Engineering Graphene-Based Membranes for

Electromechanical Sensors

Undergrad Expo. IMECE2018-89195

Owen D. Pearl, Adam N. Brock, Quang N. Tran,

Gordon B. Walbert, Owen D. Papa, Dmitriy A. Dikin,

Temple University, Philadelphia, PA, United States

8. Effect of Microﬂuidic Boundary Conditions on Flow

Topology Optimization

Undergrad Expo. IMECE2018-89434

Gabriel Garneau, Matthew Owen, Georg Pingen,

Union

University, Jackson, TN, United States,

Kurt Maute,

University

of Colorodo Boulder, Boulder, CO, United States

9. Flow Over a Smooth Sphere, Sphere With Dimples and

Sphere With Double Dimples

Undergrad Expo. IMECE2018-89440

Andreina De La Cruz, Kinnari Shah,

LaGuardia Community

College-CUNY, Long Island City, NY, United States

10. Design of a 3D Printed Modular Robot

Undergrad Expo. IMECE2018-89445

Mark Bedillion,

Carnegie Mellon University, Gibsonia, PA,

United States,

Xuan Chen, Jason Liu,

Carnegie Mellon

University, Pittsburgh, PA, United States

11. Developing Methods for Measuring Thermal Properties

of Polyimide Substrates

Undergrad Expo. IMECE2018-89472

Carlos Vargas Venegas,

Pennsylvania State University, State

College, PA, United States,

Shawn Siroka,

Pennsylvana State

University, West Hazleton, PA, United States,

Reid A.

Berdanier,

Pennsylvania State University, State College, PA,

United States

12. Using Surface Wave Elastography to Investigate

Achilles Tendon Stiffness

Undergrad Expo. IMECE2018-89536

Alan Palmer,

Kennesaw State University, Canton, GA, United

States

13. Design and Fabrication of a UAV Protection System

Undergrad Expo. IMECE2018-89577

Renato Rodriguez, Joseph Franke, Sijan Shrestha,

Anthony Nguyen, Matthew Bishop, Robert Gallo, Damoon

Soudbakhsh,

George Mason University, Fairfax, VA, United

States

14. High Temperature Digital Image Correlation for

Propulsion Materials Testing

Undergrad Expo. IMECE2018-89593

John Kershner, Natasha Bradley, Michael Walock,

Anindya Ghoshal, Muthuvel Murugan,

U.S. Army Research

Laboratory, Aberdeen Proving Ground, MD, United States

15. Three-Dimensional Voxel-Based Finite Element Analysis

of Dental Implants

Undergrad Expo. IMECE2018-89620

Kayla Reigh, Kangning Su,

Pennsylvania State University,

State College, PA, United States,

Qiyuan Mao,

Changzhou

Institute of Light Industry, Changzhou, China,

Mehran H.

Zadeh,

Temple University, Philadelphia, PA, United States,

Greg Lewis,

Pennsylvania State College of Medicine and M.S.

Hershey Medical Center, Hershey, PA, United States,

Jing Du,

Pennsylvania State University, State College, PA, United States

16. Sponge Material Made of Reduced Graphene Oxide:

Synthesis and Properties

Undergrad Expo. IMECE2018-89637

Gordon B. Walbert, Adam N. Brock, Owen Pearl,

Owen D. Papa, Quang N. Tran, Dmitriy A. Dikin,

Temple University, Philadelphia, PA, United States

TRACK  ASME INTERNATIONAL UNDERGRADUATE RESEARCH AND DESIGN EXPO

(

POSTERS ONLY

)–

SUNDAY, NOVEMBER 

219

17. Techno-Economic Analysis of MSW Bioenergy

Undergrad Expo. IMECE2018-89717

Miranda Noack,

St. Ambrose University, Davenport, IA, United

States

18. Numerical Insights of Fluid-Thermal Characteristics in a

Hybrid Microjet Liquid-Cooled Heat Sink

Undergrad Expo. IMECE2018-89720

Shitiz Sehgal, Matthew Schultz, Bladimir Ramos,

Pennsylvania State University, University Park, PA, United

States

19. Laser-Induced Graphene Supercapacitors

Undergrad Expo. IMECE2018-89734

Robert Sitbon,

Queensborough Community College,

Westwood, NJ, United States,

Alex Sullivan,

Queensborough

Community College, Little Neck, NY, United States,

Tricia

Marchese,

Queensborough Community College, Oakland

Gardens, NY, United States

20. Thermal Properties of a Concrete Aerogel Paste

Composite

Undergrad Expo. IMECE2018-89775

Chris Kobus,

Oakland University, Rochester, MI, United States

21. Powering Small Satellites and Robots Using External

Laser Beams

Undergrad Expo. IMECE2018-89843

Carter Hoffman,

University of Arizona, Phoenix, AZ, United

States,

Jekan Thanga,

University of Arizona, Tucson, AZ,

United States

22. Dynamics of Mechanical Power Ampliﬁcation Systems

in Invertebrates

Undergrad Expo. IMECE2018-89849

Jennifer Beahan,

SUNY New Paltz, New Paltz, NY, United

States

23. Highly Sensitive, Wireless Gas Sensing Based on 3D

Nonporous Graphene and RFID

Undergrad Expo. IMECE2018-89860

Farbod Moghaddam,

George Mason University, Fairfax, VA,

United States,

Daniel Mitchell,

George Mason University,

Chantilly, VA, United States,

Pilgyu Kang,

George Mason

University, Fairfax, VA, United States,

Byoung Gok Kim,

Minsu Kim,

Korea Research Institute of Chemical Technology,

Yuseong-gu, Daejeon, Korea (Republic)

24. Mechanical Optimization of Composite Coatings

Deposited by Self-Limiting Electrospray Deposition

Undergrad Expo. IMECE2018-89899

Christianna Kuznetsova, Lin Lei, Daehoon Han, Howon Lee,

Jonathan S

inger,

Rutgers, The State University of New Jersey,

Piscataway, NJ, United States

25. Energy Absorption Analysis of Additively Manufactured

Lattice Mechanical Metamaterials

Undergrad Expo. IMECE2018-89930

John Recktenwald,

George Mason University, Roanoke, VA,

United States,

Ali Beheshti,

George Mason University, Fairfax,

VA, United States

26. Thermal Characterization of GaN-based Electronics

and Optoelectronics

Undergrad Expo. IMECE2018-90001

Yiwen Song,

Pennsylvania State University, University Park,

PA, United States, T

ae Kyoung Kim, Moon Uk Cho, Jae Min

Lee, Joon Seop Kwak,

Sunchon National University, Sunchon,

Jeonnam, Korea (Republic),

Sukwon Choi,

Pennsylvania State

University, University Park, PA, United States

27. A Propulsion System for the Asteroid Mobile Imager

and Geologic Observer (AMIGO)

Undergrad Expo. IMECE2018-90004

Gregory Wilburn, Jekan Thanga,

University of Arizona,

Tucson, AZ, United States

28. Design and Implementation of Real Time Water

Monitoring System

Undergrad Expo. IMECE2018-90007

H.H. Sait, Khalid AlJudaybi, Abdullah Alkirithi, Mohammed

Albarakati, Faiz Khadra,

King Abdulaziz University, Rabigh,

Makkah, Saudi Arabia

29. Using Time Domain Indentation Data to Characterize

the Poroelasticity of Gels in Frequency Domain

Undergrad Expo. IMECE2018-90008

Alvin Maningding, Mojtaba Azadi,

San Francisco State

University, San Francisco, CA, United States

30. Leidenfrost Phenomenon

Undergrad Expo. IMECE2018-90011

Nazanin Farokhnia,

University of Houston, New York, NY,

United States,

Nazanin Farokhnia,

NanoTherm Research

Group, University of Houston, Houston, TX, United States

31. Uterus Material Properties Explored via Atomic Force

Microscopy

Undergrad Expo. IMECE2018-90012

Jose Rivera, Alvin Maningding, Victor Emmanuel,

San

Francisco State University, San Francisco, CA, United States,

Paolo Rinaudo,

University of California at San Francisco, San

Francisco, CA, United States,

Mojtaba Azadi,

San Francisco

State University, San Francisco, CA, United States

32. A Comparative Investigation of Sintering Methods for

Polymer 3D Printing Using Selective Separation Shaping

(SSS)

Undergrad Expo. IMECE2018-90022

Hadis Nouri,

University of Southern California, Los Angeles,

CA, United States

33. Thermal Properties and Microstructure Investigation of

Natural Particulate Blended High Density Polyethylene

composite

Undergrad Expo. IMECE2018-90024

Balaji Ayyanar Chinnappan,

Coimbatore Institute of

Technology, Coimbatore, India

TRACK  ASME INTERNATIONAL UNDERGRADUATE RESEARCH AND DESIGN EXPO

(

POSTERS ONLY

)–

SUNDAY, NOVEMBER 

220

34. The Effect of Multi-Walled Carbon Nanotube Additives

Into Diesel-Camphor Biofuel Blend on Diesel Engine

Performance, Combustion and Emission

Undergrad Expo. IMECE2018-90030

Rahul Kumar Tiwari,

Hyundai, Chennai, Tamil Nadu, India,

Sanat Kumar,

Texas A&M University, College Station, TX,

United States

35. Self Powered Orthosis For Stroke Patient

Undergrad Expo. IMECE2018-90031

Rahul Kumar Tiwari,

Hyundai, Chennai, Tamil Nadu, India,

Sanat Kumar,

Texas A&M University, College Station, TX,

United States

36. Performance and Surface Integrity of Wire Electrical

Discharge Machining of Thin Ti6Al4V Plate Using Coated

and Uncoated Wires

Undergrad Expo. IMECE2018-90034

Luca Watanabe Reolon, Carlos Augusto Laurindo, Ricardo

Diego Torres, Fred Lacerda Amorim,

Pontifìcia Universidade

Catolica do Parana, Curitiba, PR, Brazil

37. Pave the Path for New Architectured Materials via

Multi-Material 3D Printing

Undergrad Expo. IMECE2018-90035

Yaning Li,

University of New Hampshire, Durham, NH, United

States

38. An Inﬂatable Aircraft for Mars Exploration

Undergrad Expo. IMECE2018-90042

Andrew Okonya, Aman Chandra, Jekan Thanga,

University

of Arizona, Tucson, AZ, United States

39. Robotic Construction on the Moon and Mars Using

Selective Melting and Sintering

Undergrad Expo. IMECE2018-90043

Andrew Okonya, Erik Jensen, Aman Chandra, Jekan

Thanga,

University of Arizona, Tucson, AZ, United States

40. Fatigue Life Assessment of Dissimilar Aluminum Alloys

Weld Joints Under Four Point Rotating Bending Condition

Undergrad Expo. IMECE2018-90049

Muhammad Hashir, Riffat Asim Pasha,

University of

Engineering and Technology Taxila, Taxila Rawalpindi, Punjab,

Pakistan

41. Microstructure-Based Material Sensitive Design

Framework

Undergrad Expo. IMECE2018-90050

Bryan Melara, Yan Li, Marcos Rodriguez, Anh Phung, Jun

Cao,

California State University, Long Beach, Long Beach, CA,

United States

42. Investigation of Thermocapillary-Induced Deposited

Shape in Fused-Coating Additive Manufacturing Process

of Aluminum Alloy

Undergrad Expo. IMECE2018-90060

Jun Du, Zhengying Wei,

Xi’an Jiaotong University, Xi’an,

China

43. Optimization of Process Parameters and Sectional

Shape of Samples in Single-Layer Single-Pass Sn63Pb37

Fused Coating Additive Manufacturing

Undergrad Expo. IMECE2018-90061

Jun Du, Zhengying Wei,

Xi’an Jiaotong University, Xi’an,

China

44. Preliminary System Development and Experimental

Study of a Robotic Composite Prepreg Layup Process

Undergrad Expo. IMECE2018-90071

Vincent Legnetto, Andrew Wichelns, Yu Zhou,

SUNY

Polytechnic Institute, Utica, NY, United States

45. Numerical Simulation of Visco-Plastic Fluid Flow

Between Two Parallel Plates With Triangular Obstacles

Undergrad Expo. IMECE2018-90074

Nariman Ashraﬁ,

IAU, Tehran, Iran

46. Computational Design of a Bird-Inspired Perching

Landing Gear Mechanism

Undergrad Expo. IMECE2018-90081

Paul Nadan, Christopher Lee,

Frankln W. Olin College of

Engineering, Needham, MA, United States

47. Defect Structure Induced Strength and Toughness

Anisotropy in Hexagonal Boron Nitride (hBN)

Undergrad Expo. IMECE2018-90085

Allison Procak,

University of Delaware, Newark, DE, United

States

48. Material Testing of Skeletal Muscle Under Simple Shear

Undergrad Expo. IMECE2018-90086

Joelle Andres-Beck,

Bucknell University, Merlin, OR, United

States

49. Investigating a Framework for Visualizing Reinforcement

Learning Algorithms via Quadrupedal Robotic Simulation

Undergrad Expo. IMECE2018-90087

Brendan Bogar, Paul Reverdy,

University of Arizona, Tucson,

AZ, United States

50. Assessment of Ultrasonic Vibration Assisted Grinding

of CSiC Composites

Undergrad Expo. IMECE2018-90077

Yan Wang, Jingnan Zhao, Yinghuai Dong, Chang Shi,

Tianjin

University of Science and Technology, Tianjin, China

51. Hole Shielding: An FEA Study in Optimizing Stress

Reduction Around a Hole

Undergrad Expo. IMECE2018-90078

Russell Oehlert,

Leidos, Oaks, PA, United States,

Austin C.

Prete,

University of Maryland, New Market, MD, United States,

Daniel Longenecker,

Honda R&D, Dublin, OH, United States,

Stephen Kuchnicki,

York College of Pennsylvania, York, PA,

United States

52. An Object-Oriented Framework for Fast Development

and Testing of Mobile Robot Control Algorithms

Undergrad Expo. IMECE2018-90080

David Chan, Paul Reverdy, Minh Nguyen, Oshadha

Gunasekara, Randall Kliman,

University of Arizona, T

TRACK  ASME INTERNATIONAL UNDERGRADUATE RESEARCH AND DESIGN EXPO

(

POSTERS ONLY

)–

SUNDAY, NOVEMBER 

221

53. Advanced Methods in Computational Mechanics

Modelling Using Learning Algorithms and Decision Support

Systems

Undergrad Expo. IMECE2018-90068

Kingsley Abhulimen,

University of Lagos, Lagos, Nigeria

54. A Model for Gas-Liquid Slug Flow in a Horizontal Duct

Undergrad Expo. IMECE2018-90075

Nariman Ashraﬁ,

IAU, Tehran, Iran

55. Energy Audit in Mechanical Department

Undergrad Expo. IMECE2018-90076

K.S. Venkatesh,

Mar Baselios College of Engineering and

Technology, Trivandrum, Kerala, India,

Ashhad Noushad,

College, Kollam, Kerala, India,

Arjun Rakesh, Aswin S., Gokul

S. Jain,

Mar Baselios College of Engineering and Technology,

Trivandrum Kerala, Kerala, India

56. CFD Simulation of Structure of Small Scale Prototype

Solar Chimney Power Plant

Undergrad Expo. IMECE2018-90079

Premendra Bansod,

G.H. Raisoni College of Engineering &

Management Wagholi Pune, Pune, Maharashtra, India

57. Developing a Quantitate Tester That Detects Human

Skin Property in Microscale on Live Human

Undergrad Expo. IMECE2018-90088

Ed Mo, Miguel Coto, Alvin Maningding, Mojtaba Azadi,

San

Francisco State University, San Francisco, CA, United States

58. Finite Element Modeling of NPS Knee Morphology

Undergrad Expo. IMECE2018-90089

Margo E. Yancey,

Bucknell University, Lewisburg, PA, United

States,

Mark A. Seeley,

Geisinger Health Systems, Danville,

PA, United States,

Benjamin B. Wheatley,

Bucknell University,

Lewisburg, PA, United States

59. Implementation of a Screw-Drive Extruder in a Desktop

3D-Printing System

Undergrad Expo. IMECE2018-90110

Hongyu Wang, Yujing Zhou,

Bucknell University, Lewisburg,

PA, United States

60. Inhomogeneous Composition Fields in SiGe/Si(001)

Quantum Dots

Undergrad Expo. IMECE2018-90111

Shawn Egan, Jinye Liu, Md Hossain,

University of Delaware,

Newark, DE, United States

61. Thermomechanical Stability of Alloy Quantum Dots on

Thin-Films

Undergrad Expo. IMECE2018-90112

Tianyi Weng, Md Hossain,

University of Delaware, Newark,

DE, United States

62. Controlling Effective Mechanical Properties of

Nanocomposites via Atomic Stitching

Undergrad Expo. IMECE2018-90114

Colin McDermitt, Md Hossain,

University of Delaware,

Newark, DE, United States

63. Laser Assisted Ultrasonic Nanocrystal Surface

Modiﬁcation of AISI 4140 Steel

Undergrad Expo. IMECE2018-90115

Eman Hassan, Jun Liu, Chang Ye, Yalin Dong,

University of

Akron, Akron, OH, United States

64. Three-Dimensional Full-Field Strain Mapping in Total

Shoulder Replacement

Undergrad Expo. IMECE2018-90116

Yuxiao Zhou, Chujie Gong,

Penn State University, State

College, PA, United States,

Greg Lewis,

Penn State College

of Medicine and M.S. Hershey Medical Center, Hershey, PA,

United States,

April Armstrong,

Penn State Hershey Bone

and Joint Institute, Hershey, PA, United States,

Jing Du,

Penn State University, State College, PA, United States

65. Blueprint 3D: A Collapsible and Portable 3D Printer

Undergrad Expo. IMECE2018-90117

Thomas Van Fossen,

Rose-Hulman Institute of Technology,

Terre Haute, IN, United States

66. Analysis of Inherent Residual Stress Developed

Through Direct Metal Laser Sintering of 316L Stainless

Steel

Undergrad Expo. IMECE2018-90118

Bailey Stillman, Joe Fahmy, Ethan Stiles, Jacob Lewallen,

Jerome Suminski, Tyrele Adams,

Western Carolina University,

Cullowhee, NC, United States

67. Rule-based Control of Micro-Combined Heat and

Power Systems

Undergrad Expo. IMECE2018-90119

Catherine Weaver, Neera Jain,

Purdue University, West

Lafayette, IN, United States

68. A Study of the Effect of Fatigue Loading on the

Behavior of Additive Manufactured Parts

Undergrad Expo. IMECE2018-90120

Patricia Cupay, Constance Ziemian,

Bucknell University,

Lewisburg, PA, United States

69. Geometric Effects on 3D Coating by Self-Limiting

Electrospray

Undergrad Expo. IMECE2018-90121

Dylan Kovacevich, Rutgers University,

Belle Mead, NJ,

United States,

Lin Lei, Jonathan Singer,

Rutgers University,

Piscataway, NJ, United States

70. Mathematically Modeling Hysteresis of Polymer-

Derived Ceramics

Undergrad Expo. IMECE2018-90122

J. Lin,

California State University, Los Angeles, Los Angeles,

CA, United States

71. Computational Hydrodynamic Analysis of

Reconﬁgurable Origami Robots

Undergrad Expo. IMECE2018-90123

Andres Zambrano,

University of Pennsylvania, Philadelphia,

PA, United States

TRACK  ASME INTERNATIONAL UNDERGRADUATE RESEARCH AND DESIGN EXPO

(

POSTERS ONLY

)–

SUNDAY, NOVEMBER 

222

72. Limits in trajectory-based deblurring

Undergrad Expo. IMECE2018-90124

Beatriz Fusaro,

Georgia Institute of Technology, Atlanta, GA,

United States

73. Development of High-Performance Nanoﬁbers from

Worm Silk: Nanomanufacturing, Characterization, and

Nanomechanical Testing

Undergrad Expo. IMECE2018-90125

Iakov Golman,

University of Nebraska Lincoln, Lincoln, NE,

United States,

Mohammad N. Andalib,

University of

Nebraska – Lincoln, Lincoln, NE, United States,

Yuris Dzenis,

Univ of Nebraska, Lincoln, NE, United States

74. Development of a Robotic Coffee Harvester Using

computer aided design and virtual reality methods

Undergrad Expo. IMECE2018-90126

Jeyson Andres Hernandez Barbosa,

Universidad Autonoma

de Bucaramanga, Bucaramanga, Santander, Colombia,

Helio Sneyder Esteban Villegas,

Universidad Autonóma de

Bucaramanga, Bucaramanga, Colombia,

Andrés F. Aldana,

Universidad Autónoma de Bucaramanga, Bucaramanga,

Colombia,

Brajan Nicolas Ruiz Romero, Sebastian Roa

Prada, Oscar E. Rueda,

Universidad Autonoma de

Bucaramanga, Bucaramanga, Santander, Colombia

75. Underground and Overhead Transmission of Electric

Power Systems

Undergrad Expo. IMECE2018-90127

Harshitha Gadangi,

Rutgers University, Piscataway, NJ,

United States,

Assimina Pelegri,

Rutgers University, East

Brunswick, NJ, United States

TRACK  ASME INTERNATIONAL UNDERGRADUATE RESEARCH AND DESIGN EXPO

(

POSTERS ONLY

)–

SUNDAY, NOVEMBER 

223

NOTES

224

Track Organizer

Stephen Tse,

Rutgers University, United States

Topic Organizers

Po-hao Huang,

University of Arkansas, United States

Zhiting Tian,

Virginia Tech, United States

TRACK 15 NSF (INCLUDES NSF STUDENT

COMPETITION (POSTERS ONLY))

WEDNESDAY, NOVEMBER 14

15-1 NSF-FUNDED RESEARCH

15-1-1

Exhibit Hall B 11:45am–2:30pm

1. Transfer Printing of Integrated Electronics Onto Cross-

Linked Collagen

Poster Presentation. IMECE2018-88523

Salvador Moreno, Manuel Lopez-Quevedo, Majid Minary,

University of Texas at Dallas, Richardson, TX, United States

2. Preparing for Academic Careers: Efﬁcacy of Continuous

Holistic Faculty Development

Poster Presentation. IMECE2018-88895

Louis Everett,

University of Texas at El Paso, El Paso, TX,

United States

3. Radiative Thermal Conduction by Plasmonic Resonator

Chains in Semiconductor Nanowires

Poster Presentation. IMECE2018-89066

Eric Tervo, Michael Gustafson, Baratunde Cola,

Zhuomin Zhang, Michael Filler,

Georgia Institute of

Technology, Atlanta, GA, United States

4. Two Part Natural Adhesive at Nano-Interfaces in Bone

Poster Presentation. IMECE2018-89072

Seyedreza Morsali, Yang Wang, Qian Qian, Majid Minary,

University of Texas at Dallas, Richardson, TX, United States

5. Nature’s Strategy to Enhance Mechanical and Fracture

Properties of Nacre (Mother of Pearl)

Poster Presentation. IMECE2018-89080

Sina Askarinejad,

University of Cambridge, Cambridge,

United Kingdom,

Nima Rahbar,

Worcester Polytechnic

Institute, Worcester, MA, United States

6. Role of Circumferential and Longitudinal Smooth Muscle

in Murine Vaginal Tissue

Poster Presentation. IMECE2018-89132

Gabrielle L. Clark, Dylan J. Lawrence, Sarah H. Lindsey,

Tulane University, New Orleans, LA, United States,

Laurephile

Desrosiers, Leise R. Knoepp,

Ochsner Clinical School, New

Orleans, LA, United States,

Carolyn L. Bayer, Kristin S. Miller,

Tulane University, New Orleans, LA, United States

7. Classiﬁcation of Activities of Daily Living Based on Hand

Kinematics Obtained Using an IR Depth Sensor

Poster Presentation. IMECE2018-89169

Hajar Sharif, Pramod Chembrammel,

University of Illinois at

Urbana Champaign, Urbana, IL, United States,

T. Kesavadas,

University of Illinois at Urbana-Champaign, Mahomet, IL,

United States

8. On the Multi-Field Processing of Magnetoactive

Elastomeric Composites

Poster Presentation. IMECE2018-89182

Md. Abdulla Al Masud, Zoubeida Ounaies, Paris

vonLockette,

Pennsylvania State University, State College, PA,

United States

9. Interfacial and Transport Property Measurements of

Liquid Sodium Within a Porous Structure

Poster Presentation. IMECE2018-89199

Alexander Limia, Peter Kottke, Daniel Silverstein,

Andrei G. Fedorov, Shannon K. Yee,

Georgia Institute of

Technology, Atlanta, GA, United States

10. Suction Effects in Crater Arrays

Poster Presentation. IMECE2018-89205

Liu Wang, Kyoungho Ha, Shutao Qiao, Nanshu Lu,

University of Texas at Austin, Austin, TX, United States

11. Adhesion and Friction Control the Aspect Ratio and

Strain in 2D Material Blisters

Poster Presentation. IMECE2018-89210

Zhaohe Dai, Nanshu Lu,

University of Texas at Austin, Austin,

TX, United States

12. Self-Cleaning, High Transmission, Near Unity Haze

OTS/Silica Nanostructured Glass

Poster Presentation. IMECE2018-89211

Sajad Haghanifar, Paul Leu,

University of Pittsburgh,

Pittsburgh, PA, United States

13. Flexible Nanograss With Highest Combination of

Transparency and Haze for Optoelectronic Plastic

Substrates

Poster Presentation. IMECE2018-89243

Sajad Haghanifar, Paul Leu,

University of Pittsburgh,

Pittsburgh, PA, United States

14. Exploring Biases Between Human and Machine

Generated Designs

Poster Presentation. IMECE2018-89244

Christian Lopez,

Pennsylvania State University, Newport, PA,

United States,

Conrad Tucker,

Pennsylvania State University,

State College, PA, United States,

Scarlett Miller,

Pennsylvania

State University, University Park, PA, United States

15. Atomistic Simulations of Mechanical Properties of

Circular and Collapsed Carbon Nanotubes With Covalent

Cross-Links

Poster Presentation. IMECE2018-89260

Arun Thapa, Alexey Volkov,

University of Alabama,

Tuscaloosa, AL, United States

16. Numerical Investigation of Internal Forces During

Carbon Nanotube Forest Self-Assembly

Poster Presentation. IMECE2018-89293

Taher Hajilounezhad, Matthew Maschmann,

University of

Missouri, Columbia, MO, United States

TRACK  NSF

(

INCLUDES NSF STUDENT COMPETTION

(

POSTERS ONLY

)) –

WEDNESDAY, NOVEMBER 

225

17. Electric Field Effects on KTN Ferroelectric Phase

Transitions Studied by Ultrasound Pulse-Echo Technique

Poster Presentation. IMECE2018-89300

Robert Mech,

Gordon College, Wenham, MA, United States

18. The Path to Optical Sorting of Large Dielectric

Microparticles With Whispering Gallery Modes

Poster Presentation. IMECE2018-89301

Alexander King, Nathan J. Jordan,

Gordon College, Wenham,

MA, United States

19. Maximizing Energy Efﬁciency and Minimizing Thermal

Dose in Electrosurgical Tissue Joining Processes

Poster Presentation. IMECE2018-89311

Scott Phillips,

Washington State University, Bellevue, WA,

United States,

Che-Hao Yang, Roland Chen,

Washington

State University, Pullman, WA, United States

20. Numerical Studies on Dynamic Interactions Between

Lugged Wheel and Granular Media

Poster Presentation. IMECE2018-89313

Preethi Ravula, Gizem Dilber Acar,

University of Maryland,

College Park, College Park, MD, United States,

Balakumar

Balachandran,

University of Maryland, College Park, Rockville,

MD, United States

21. Effects of Target Thickness on Interfaces of Impact

Welds

Poster Presentation. IMECE2018-89320

Taeseon Lee, Anupam Vivek, Glenn Daehn,

Ohio State

University, Columbus, OH, United States

22. Scalable Pulsed Light Sintering of Nanomaterials

Poster Presentation. IMECE2018-89334

Michael Dexter,

Rutgers, The State University of New Jersey,

Middlesex, NJ, United States,

Hyun-Jun Hwang, Rajiv

Malhotra,

Rutgers, The State University of New Jersey,

Piscataway, NJ, United States,

Chih-Hung Chang,

Oregon

State University, Corvallis, OR, United States

23. Tunable Granular Metamaterials Based Upon Wave

Propagation Analysis Using Granular Micromechanics

Poster Presentation. IMECE2018-89335

Nima Nejadsadeghi, Anil Misra,

University of Kansas,

Lawrence, KS, United States

24. Additive Manufacturing Aids the Veriﬁcation of Granular

Micromechanics Model

Poster Presentation. IMECE2018-89339

Nima Nejadsadeghi, Anil Misra,

University of Kansas,

Lawrence, KS, United States

25. Effects of Environmental Conditions on Geometrical

and Mechanical Properties of Polycarbonate Samples

Made by the Fused Filament Fabrication Process

Poster Presentation. IMECE2018-89344

Yishu Yan, Lichen Fang, Ojaswi Agarwal, Kevin Hemker,

Sung Kang,

Johns Hopkins University, Baltimore, MD, United

States

26 Titanium Oxynitride Thin Films With Large Power

Conversion Efﬁciency in Photovoltaic Solar Cells

Poster Presentation. IMECE2018-89348

Nikhil Reddy Mucha, Surabhi Shaji, Panupong Jaipan,

North

Carolina A&T State University, Greensboro, NC, United States,

Monica Kathiyar,

Indian Institute of Technology, Kanpur, India,

Jeffrey Shield,

University of Nebraska Lincoln, Lincoln, NE,

United States,

Hemali Rathnayake,

University of North

Carolina at Greensboro, Greensboro, NC, United States,

Dhananjay Kumar,

North Carolina A&T State University,

Greensboro, NC, United States

27. Rate Dependent Fracture Under Mixed-Mode Loading

Conditions for an Epoxy/Silicon Interface

Poster Presentation. IMECE2018-89365

Tianhao Yang, Rui Huang, Kenneth Liechti,

University of

Texas at Austin, Austin, TX, United States

28. Validated Nonlinear Finite Element Analysis of Wire

Rope Isolators Under Dynamic Excitations

Poster Presentation. IMECE2018-89381

mid Ghasemi, Claudia Marin,

Howard University,

Washington, DC, United States

29. Contactless Ultrafast Actuation by Using

Photomechanical Instabilities in Azobenzene-

Functionalized Polymers

Poster Presentation. IMECE2018-89395

Junfeng Gao,

University of Pittsburgh, Pittsburgh, PA, United

States,

Matthew L. Smith,

Hope College, Holland, MI, United

States,

M. Ravi Shankar,

University of Pittsburgh, Pittsburgh,

PA, United States

30. Homogenization and Stochastic Fracture Simulation of

Quasi-Brittle Materials

Poster Presentation. IMECE2018-89436

Bahador Bahmani,

University of Tennessee, Knoxville,

Tullahoma, TN, United States,

Reza Abedi,

University of

Tennessee, Tullahoma, TN, United States,

Philip L. Clarke,

University of Tennessee Space Institute, Tullahoma, TN, United

States,

Anand Nagarajan, Ming Yang,

Ohio State University,

Columbus, OH, United States,

Soheil Soghrati,

Ohio State

University, Dublin, OH, United States,

Katherine A. Acton,

University of St. Thomas, St. Paul, MN, United States

31. Understanding and Predicting Properties and

Performance of Additively Manufactured Nickel-Based

Superalloys

Poster Presentation. IMECE2018-89437

Weitao Shan, Grace V. de Leon Nope,

University of

Pittsburgh, Pittsburgh, PA, United States

32. Adaptive Space-Time Deep-Learning Enabled

Multiscale Poromechanics

Poster Presentation. IMECE2018-89460

Kun Wang, Waiching Sun,

Columbia University, New York, NY,

United States

TRACK  NSF

(

INCLUDES NSF STUDENT COMPETTION

(

POSTERS ONLY

)) –

WEDNESDAY, NOVEMBER 

226

33 Effects of Varying Processing Parameters on the

Thermo-Physical Properties of 316L Stainless Steel

Fabricated by Selective Laser Melting

Poster Presentation. IMECE2018-89463

Nigel Amoafo-Yeboah,

Southern University and A&M College,

Baton Rouge, LA, United States,

Patrick Mensah,

Southern

University, Baton Rouge, LA, United States,

Stephen

Akwaboa,

Southern University and A&M College, Baton

Rouge, LA, United States,

Samuel Ibekwe,

Southern

University, Baker, LA, United States

34. Modeling of Multiphase Heat Transfer in Microscale

Heat Sinks

Poster Presentation. IMECE2018-89466

Kojo Asiamah Osafo,

Southern University A&M College,

Baton Rouge, LA, United States,

Patrick Mensah,

Southern

University, Baton Rouge, LA, United States,

Stephen

Akwaboa,

Southern University and A&M College, Baton

Rouge, LA, United States

35. Experimental Investigation of Structural Power Flow in

2D Locally Resonant Elastic Metamaterials

Poster Presentation. IMECE2018-89483

Hasan Al Ba’ba’a, Mostafa Nouh,

University at Buffalo, State

University of New York, Buffalo, NY, United States

36. 3D Printing of Molecularly Ordered Heterogeneous

Active Matter

Poster Presentation. IMECE2018-89486

Mohsen Tabrizi,

University of Pittsburgh, Pittsburgh, PA,

United States,

Mohand Saed, Taylor Ware,

University of Texas

at Dallas, Richardson, TX, United States,

M. Ravi Shankar,

University of Pittsburgh, Pittsburgh, PA, United States

37. Competitive Two-Stage Location and Pricing Decisions

on a Network: An Air Transportation Case Study

Poster Presentation. IMECE2018-89517

Reed Harder, Vikrant Vaze,

Dartmouth College, Hanover, NH,

United States

38. Design of Tribological Composites for Multi-Functional

Applications

Poster Presentation. IMECE2018-89520

Xiu Jia, Tomas Grejtak, Brandon A. Krick, Natasha

Vermaak,

Lehigh University, Bethlehem, PA, United States

39. Pro-Environmental Social Inﬂuence via Randomized

Incentive Programs

Poster Presentation. IMECE2018-89540

John Edgar Fontecha Garcia,

University at Buffalo, State

University of New York, Buffalo, NY, United States,

Manjunath

Jois,

U.S. Coast Guard, Elizabeth City, NC, United States,

Jose L. Walteros, Alexander Nikolaev,

University at Buffalo,

State University of New York, Buffalo, NY, United States

40. Microelasticity Modeling of Microstructures

Poster Presentation. IMECE2018-89555

Zachary J. Morgan, Yongmei M. Jin,

Michigan Technological

University, Houghton, MI, United States

41. Scaling Laws for Porous Solids With Intermediate

Relative Densities

Poster Presentation. IMECE2018-89575

Timothy Ibru,

Georgia Institute of Technology, Decatur, GA,

United States,

Vadim Roytershteyn,

Space Science Institute,

Boulder, CO, United States,

Garritt Tucker,

Colorado School

of Mines, Golden, CO, United States,

Antonia Antoniou,

Georgia Institute of Technology, Atlanta, GA, United States

42. Parameter Identiﬁcation Through Analysis of Electro-

Elastic Nonlinearities in Ultrasound Acoustic Energy

Transfer Systems

Poster Presentation. IMECE2018-89578

Vamsi Chandra Meesala,

Virginia Tech, Blacksburg, VA,

United States,

Muhammad Hajj,

Stevens Institute of

Technology, Hoboken, NJ, United States,

Shima Shahab,

Virginia Tech, Blacksburg, VA, United States

43. X-Ray Analysis of Melt-Spun Nanostructured NiTiCu

Shape Memory Ribbons

Poster Presentation. IMECE2018-89603

Prashant Gunai, Pranav Bhale

, Pnina Ari-Gur,

Western

Michigan University, Kalamazoo, MI, United States

44. Second-Order Homogenization Estimates for the

Macroscopic Behavior and Field Fluctuations in

Viscoplastic Composites and Comparisons With Full-Field

Simulations

Poster Presentation. IMECE2018-89609

Joshua Furer, Pedro Ponte Castaòeda,

University of

Pennsylvania, Philadelphia, PA, United States

45. Origin of Nanoscale Friction Contrast Between

Graphene and MoS

Poster Presentation. IMECE2018-89612

Han Ye,

University of Pennsylvania, Philadelphia, PA, United

States,

Zhijiang Ye,

Miami University, Oxford, OH, United

States,

Mohammad R. Vazirisereshk,

University of California,

Merced, Merced, CA, United States,

Mengqiang Zhao,

A.T. Charlie Johnson,

University of Pennsylvania, Philadelphia,

PA, United States,

Ashlie Martini,

University of California,

Merced, Atwater, CA, United States,

Robert W. Carpick,

University of Pennsylvania, Philadelphia, PA, United States

46. A Comprehensive Study of Soft Porous Lubrication,

From Red Cells to Skiing/Snowboarding

Poster Presentation. IMECE2018-89621

Zenghao Zhu, Qianhong Wu,

Villanova University, Villanova,

PA, United States

47. Optimizing the Input Parameters of Binder Jetting for

the Additive Manufacturing (AM) of Aluminum Oxide

Poster Presentation. IMECE2018-89628

Edgar Mendoza,

Carnegie Mellon University, Pittsburgh, PA,

United States

48. The Taylor-Culick Proﬁle for Spinning Rocket Motors

Poster Presentation. IMECE2018-89629

Orie Cecil, Joseph Majdalani,

Aubur

University, AL, United States

TRACK  NSF

(

INCLUDES NSF STUDENT COMPETTION

(

POSTERS ONLY

)) –

WEDNESDAY, NOVEMBER 

227

49. Effects of Surface Energy Reducing Agents on

Adhesion Force in Liquid Bridge Microstereolithography

Poster Presentation. IMECE2018-89638

Aslan Bafahm Alamdari, Jeongwoo Lee, Md. Omar Faruk

Emon, Jae-Won Choi,

University of Akron, Akron, OH, United

States

50. Chance-Constrained Optimal Control Approach to

Optimal Path Planning

Poster Presentation. IMECE2018-89648

Rachit Aggarwal, Mrinal Kumar,

Ohio State University,

Columbus, OH, United States

51. Hydrodynamic Performance of Optimal Flexible

Hydrofoil Kinematics for Biomimetic Design

Poster Presentation. IMECE2018-89656

Hisham Shehata, Craig Woolsey, Muhammad Hajj,

Virginia

Tech, Blacksburg, VA, United States

52. In Situ Monitored Self-Assembly of 3D Graphene-Based

Nanostructures

Poster Presentation. IMECE2018-89662

Chunhui Dai, Kriti Agarwal, Jeong-Hyun Cho,

University of

Minnesota, Minneapolis, Minneapolis, MN, United States

53. Design of 2D/3D-Helmholtz Coil Systems for Driving

FePd Nanohelix Nanorobots for Cancer Treatment and of

Dynamic Mechanical Tester System for Layered Structure

of Agarose Gel and Cancer Cells

Poster Presentation. IMECE2018-89684

Minoru Taya, Cerwyn Chiew, Satomi Takao,

University of

Washington, Seattle, WA, United States

54. A Comprehensive Study of Fluid Flow in a Soft Porous

Material Under Compaction

Poster Presentation. IMECE2018-89700

Qiuyun Wang,

Villanova University, Chesterbrook, PA, United

States,

Qianhong Wu,

Villanova University, Villanova, PA,

United States

55. New Design of a Mechanical Transducer in Atomic

Force Microscopy for Imaging Beyond Topography

Poster Presentation. IMECE2018-89724

Sajith Dharmasena,

Ohio State University, Columbus, OH,

United States,

Randi Potekin,

Purdue University, Purdue, IN,

United States,

Zining Yang, Seok Kim, Lawrence Bergman,

Alexander Vakakis,

University of Illinois at Urbana-

Champaign, Urbana, IL, United States,

Hanna Cho,

Ohio State

University, Columbus, OH, United States

56. Novel Supply Chain and Process Modeling for Cell

Therapy Manufacturing and Distribution

Poster Presentation. IMECE2018-89756

Yi Liu, Robert Bishop, Aubrey Incorvaia,

Georgia Institute of

Technology, Atlanta, GA, United States,

Amritava Das,

University of Wisconsin-Madison, Madison, WI, United States,

Bhavya Divvela,

Georgia Institute of Technology, Atlanta, GA,

United States,

Krishanu Saha,

University of Wisconsin-

Madison, Madison, WI, United States,

Aaron Levine, Kan

Wang, Chelsea White, Ben Wang,

Georgia Institute of

Technology, Atlanta, GA, United States

57. High Prandtl Number Facility for Study of Rayleigh-

Benard Convection in Various Container Shapes

Poster Presentation. IMECE2018-89757

Jessica Imgrund, Hamed Ziad Ammar, Stephen R.

Johnston,

Georgia Institute of Technology, Atlanta, GA, United

States,

Enrico Fonda,

New York University, Brooklyn, NY,

United States,

Devesh Ranjan,

Georgia Institute of

Technology, Atlanta, GA, United States,

Katepalli R.

Sreenivasan,

New York University, Brooklyn, NY, United States

58. Fuzzy Logic Utilization for UAV Path Planning

Poster Presentation. IMECE2018-89777

Zoe Lee, Manish Kumar, Kelly Cohen,

University of

Cincinnati, Cincinnati, OH, United States

59. Theoretical and Experimental Study of Transient

Squeezing Flow

Poster Presentation. IMECE2018-89813

Ji Lang, Qianhong Wu,

Villanova University, Villanova, PA,

United States

60. Atomistic Simulation and Classical Nucleation Theory

of Edge Dislocation Jog-Pair Formation in Aluminum

Poster Presentation. IMECE2018-89816

Anas Abu-Odeh, Maeva Cottura, Mark Asta,

University of

California, Berkeley, Berkeley, CA, United States

61. Adhesion Study for Robotic 3D Printing

Poster Presentation. IMECE2018-89836

Arriana Nwodu,

Florida Agricultural & Mechanical University,

Tallahassee, FL, United States,

Raquel Werner, Jolie Frketic,

Florida State University, Tallahassee, FL, United States,

Tarik Dickens,

Florida Agricultural & Mechanical University,

Tallahassee, FL, United States

62. Magnetocaloric Properties of Fe90Ta10 Thin Films

Poster Presentation. IMECE2018-89850

Surabhi Shaji,

North Carolina A&T State University,

Greensboro, NC, United States,

Prakash Giri,

University of

Nebraska–Lincoln, Lincoln, NE, United States,

Nikhil Reddy

Mucha,

North Carolina A&T State University, Greensboro, NC,

United States,

Christian Binek,

University of Nebraska–

Lincoln, Lincoln, NE, United States,

Dhananjay Kumar,

North

Carolina A&T State University, Greensboro, NC, United States

63. Experimental Assessment of Miniature Accelerometers

Designed for Sensing Middle Ear Motion

Poster Presentation. IMECE2018-89857

Alison Hake, Chuming Zhao,

University of Michigan, Ann

Arbor, MI, United States,

Wang-Kyung Sung,

Vesper

Technologies Inc., Boston, MA, United States,

Karl Grosh,

University of Michigan, Ann Arbor, MI, United States

64. Inﬂuence of Gold Catalyst on the Growth of Titanium

Nitride Nanowires

Poster Presentation. IMECE2018-89858

Panupong Jaipan, Chandra Nannuri, Nikhil Reddy Mucha,

Kaushik Sarkar,

North Carolina A&T State University

Greensboro, NC, United States,

Adele Moatti, Jay Narayan,

North Carolina State University

Svitlana Fialkova, Dhananjay Kumar,

North Car

TRACK  NSF

(

INCLUDES NSF STUDENT COMPETTION

(

POSTERS ONLY

)) –

WEDNESDAY, NOVEMBER 

228

65. Design and Validation of New Cryogenic Nitrogen

Facility for Exploration of Rayleigh-Benard Convection at

High Rayleigh Numbers

Poster Presentation. IMECE2018-89861

Stephen R. Johnston, Jessica Imgrund,

Georgia Institute of

Technology, Atlanta, GA, United States,

Enrico Fonda,

Katepalli R. Sreenivasan,

New York University, Brooklyn, NY,

United States,

Devesh Ranjan,

Georgia Institute of

Technology, Atlanta, GA, United States

66. Dependence of Mechanical Characteristics of Polymer-

Grafted Particle Films on Chain Architecture

Poster Presentation. IMECE2018-89868

Jaejun Lee, Zongyu Wang, Tingwei Deng, Robert F. Davis,

Krzysztof Matyjaszewski, Micheal R. Bockstaller,

Carnegie

Mellon University, Pittsburgh, PA, United States

67. A Combined Experimental and Computational Study on

the Process-Structure-Property Relationship of Additively

Manufactured Bi-Continuous Piezocomposites

Poster Presentation. IMECE2018-89872

Zhuo Wang,

Mississippi State University, Starkville, MS,

United States,

Li He,

University of Iowa, Iowa City, IA, United

States,

Wenhua Yang,

Mississippi State University, Starkville,

MS, United States,

Xuan Song,

University of Iowa, Iowa City,

IA, United States,

Lei Chen,

Mississippi State University,

Starkville, MS, United States

68. Additive Manufacturing of Complex Micro-Architected

Graphene Aerogels

Poster Presentation. IMECE2018-89882

Ryan Hensleigh, Huachen Cui,

Virginia Tech, Blacksburg, VA,

United States,

James Oakdale, Jianchao Ye, Patrick

Campbell, Eric Duoss, Christopher M. Spadaccini,

Lawrence Livermore National Laboratory, Livermore, CA,

United States,

Xiaoyu Zheng,

Virginia Tech, Blacksburg, VA,

United States,

Marcus Worsley,

Lawrence Livermore National

Laboratory, Livermore, CA, United States

69. Phase Transforming Architectured/Cellular Materials

Under Biaxial/Multiaxial Loading Conditions

Poster Presentation. IMECE2018-89887

Yunlan Zhang, Mirian Velay, Pablo Zavattieri,

Purdue

University, West Lafayette, IN, United States,

David Restrepo,

San Antonio University, San Antonio, TX, United States,

Nilesh Mankame,

General Motors Research &

Devevelopment, Warren, MI, United States

70. A Comparative Study on Selective Laser Melting and

Electron Beam Additive Manufacturing Processes

Poster Presentation. IMECE2018-89915

M. Shaﬁqur Rahman, Paul D. Herrington, Paul Schilling,

University of New Orleans, New Orleans, LA, United States,

Uttam Chakravarty,

University of New Orleans, Kenner, LA,

United States

71. A Microstructure-Based Modeling Approach for

Electrostriction in Relaxor

Poster Presentation. IMECE2018-89919

Anil Erol, Paris Von Lockette,

Pennsylvania State University,

University Park, PA, United States

72. Mapping of Phonon Modes Between Two-Dimensional

and Three-Dimensional Systems

Poster Presentation. IMECE2018-89920

Hyun-Young Kim, Alan McGaughey,

Carnegie Mellon

University, Pittsburgh, PA, United States

73. Assessment of Angiogenesis and Cell Survival of a

Multi-Layered Bio-printed Aortic Construct

Poster Presentation. IMECE2018-89932

Beu P. Oropeza, Luis H. Solis, Daisy Alvarado, Jesus

Castor, Mirsa Gonzalez Favela, Alba Leyva, Emilio Loera,

Gisela Lopaz, Fernanda Lugo, Erik Munoz, Paola

Rodriguez, Leila Subia, Valeria Altamirano, Jesus Cedeno,

Dante Chaparro Vega, Octavio Cordova, Isaac Deaguero,

Erwin Delgado, Michael Furth, Mario Garcia, Tania

Miramontes, Carlos Serna, Arahim Zuniga Herrera, Thomas

Boland,

University Texas at El Paso, El Paso, TX, United States

74. Removal of Off-Flavor Compounds in Aquaculture

Environment: Optimizing New Techniques for Sustainable

Aquaculture Systems

Poster Presentation. IMECE2018-89944

Tunan Peng, Norma Alcantar,

University of South Florida,

Tampa, FL, United States

75. Continuous Phase Transition Control of Vanadium

Dioxide Using Feedback Mechanism

Poster Presentation. IMECE2018-89955

Jiguo Dai, Chandika Annasiwatta, Jordan Berg, Ayrton

Bernussi, Zhaoyang Fan, Beibei Ren,

Texas Tech University,

Lubbock, TX, United States

76. Design and Additive Manufacturing of Self-Sensing

Architected Metamaterials

Poster Presentation. IMECE2018-89986

Amanda Wei, Xiaoyu Zheng,

Virginia Tech, Blacksburg, VA,

United States

77. Welding Robotic Co-Worker: Autonomous Welding

Seam Extraction

Poster Presentation. IMECE2018-90020

Yao Li,

University of Illinois at Urbana-Champaign, Urbana, IL,

United States,

T. Kesavadas,

University of Illinois at Urbana-

Champaign, Mahomet, IL, United States

15-2 NSF RESEARCH EXPERIENCES FOR

UNDERGRADUATES (REU)

15-2-1

11:45am–2:30pm

78. Custom Instrumentation for Vibration Assisted Nano

Abrasive Machining Process

Poster Presentation. IMECE2018-89111

Nathan Darkins,

University of Cincinnati, Cincinnati, OH,

United States,

Anne Brant, U

niversity of Cincinnati, Blue Ash,

OH, United States,

Murali Sundaram,

University of Cincinnati,

Cincinnati, OH, United States

TRACK  NSF

(

INCLUDES NSF STUDENT COMPETTION

(

POSTERS ONLY

)) –

WEDNESDAY, NOVEMBER 

229

79. Printing of Three Dimensional Metal Structures by

Electrochemical Additive Manufacturing

Poster Presentation. IMECE2018-89112

Narek Manukyan,

University of Cincinnati, Cincinnati, OH,

United States,

Anne Brant,

University of Cincinnati, Blue Ash,

OH, United States,

Murali Sundaram,

University of Cincinnati,

Cincinnati, OH, United States

80. Dispersion Mechanics of Inertially Ampliﬁed Acoustic

Metamaterials

Poster Presentation. IMECE2018-89484

David DePauw, Mostafa Nouh,

University at Buffalo, State

University of New York, Buffalo, NY, United States

81. Water Desalination Using UV-Polymerizable Lyotropic

Liquid Crystal-Carbon Nanotube Composite Membranes

Poster Presentation. IMECE2018-89492

Dominique Porcincula,

California Polytechnic State University,

San Luis Obispo, CA, United States,

Chris Kasprzak,

Virginia

Tech, Blacksburg, VA, United States,

Alejandro Madriz,

Shanju Zhang,

California Polytechnic State University, San

Luis Obispo, CA, United States

82. Failure Resilient Design of an Electro-Hydrostatic

Actuator Based Flight Control System

Poster Presentation. IMECE2018-89635

Samuel Zelman, Pingfeng Wang,

University of Illinois at

Urbana-Champaign, Urbana, IL, United States

83 Nanoporous Copper in Dentin Resin Composites

Poster Presentation. IMECE2018-89642

Sarah Violante,

Georgia Institute of Technology, Atlanta, GA,

United States,

Timothy Ibru,

Georgia Institute of Technology,

Decatur, GA, United States,

Antonia Antoniou,

Georgia

Institute of Technology, Atlanta, GA, United States

84. Research Experience for Teachers: Similarities With

REU Experience

Poster Presentation. IMECE2018-89776

Chris Kobus, Xia Wang,

Oakland University, Rochester, MI,

United States

85. Mechanical Behavior of Poly(lactic Acid) Undergoing

Degradation

Poster Presentation. IMECE2018-89792

Anton Venediktov,

New Jersey Institute of Technology,

Newark, NJ, United States,

Shawn Chester,

New Jersey

Institute of Technology, North Caldwell, NJ, United States

86. Optimizing Microrobotic Flight With Two-Photon

Polymerization

Poster Presentation. IMECE2018-89802

Lisa Soderlind, Igor Paprotny,

University of Illinois at

Chicago, Chicago, IL, United States

87. Fabrication and Characterization of Colored

Nanoporous Sol-Gel Glasses

Poster Presentation. IMECE2018-89878

Chih-Hung Chang, Alvin Chang, Yujuan He,

Oregon State

University, Corvallis, OR, United States

, Maria Torres Arango,

West Virginia University, Morgantown, WV, United States,

Rajiv Malhotra,

Rutgers, The State University of New Jersey,

New Brunswick, NJ, United States,

Kostas Sierros,

West

Virginia University, Morgantown, WV, United States,

Zhenxing

Feng, Maoyu Wang,

Oregon State University, Corvallis, OR,

United States,

Yang Ren,

APS, Argonne, IL, United States

88. Papertronic Leak Detectors

Poster Presentation. IMECE2018-89961

Mauroof Khan, Ramendra Pal, Xiyue Zou,

Rutgers, The State

University of New Jersey, Piscataway, NJ, United States,

Urvish Patel,

Rutgers, The State University of New Jersey,

Carteret, NJ, United States,

Aaron Mazzeo,

Rutgers, The State

University of New Jersey, Piscataway, NJ, United States

89. Flexible and Conformal Paper-Based, Force-Sensing

Pads

Poster Presentation. IMECE2018-89978

Cora LoPresti, Tongfen Liang, Xiyue Zou, Aaron Mazzeo,

Rutgers, The State University of New Jersey, Piscataway, NJ,

United States

TRACK  NSF

(

INCLUDES NSF STUDENT COMPETTION

(

POSTERS ONLY

)) –

WEDNESDAY, NOVEMBER 

230

16-1-1: Acoustics, Vibration, and Phononics

16-2-1: Advanced Manufacturing

16-4-1: Biomedical & Biotechnology Engineering

16-5-1: Design, Reliability, Safety, and Risk

16-6-1: Dynamics, Vibration, and Control

16-7-1: Engineering Education

16-8-1: Energy

16-9-1: Fluids Engineering

16-10-1: Heat Transfer and Thermal Engineering

16-11-1: Materials: Genetics to Structures

16-12-1: Mechanics of Solids, Structures and Fluids

16-13-1: Society-Wide Micro and Nanotechnology Forum

16-14-1: Best Student Poster Competition on Computational Mechanics

Track Organizer

Albert Ratner,

University of Iowa, United States

Topic Organizers

Qian Qian,

University of Texas at Dallas, United States

Ganesh Balasubramanian,

Lehigh University, United States

Jun Liu,

North Carolina State University, United States

Bo Li,

Villanova University, United States

Caglar Oskay,

Vanderbilt University, United States

TRACK 16 VIRTUAL PODIUM (POSTERS)

WEDNESDAY, NOVEMBER 14

16-1 ACOUSTICS, VIBRATION, AND

PHONONICS

16-1-1 Acoustics, Vibration, and Phononics

Exhibit Hall B 11:45am–2:30pm

90. On the Role of Geometry Parameters in the Dynamic

Characteristic and Stability of Wave Journal Bearings

Poster Paper Publication. IMECE2018-88258

Baisong Yang,

Xi’an Jiaotong Unviersity, Shaanxi, China,

Sheng Feng, Haipeng Geng, Jian Zhou, Lie Yu,

Xi’an

Jiaotong University, Xi’an City, China

91. Origami-Based Elastic Metamaterials for Low

Frequency Vibration Suspension and Flexural Wave Control

Poster Presentation. IMECE2018-88516

Mingkai Zhang,

Beijing Institute of Technology, Beijing,

Beijing, China,

Rui Zhu,

University of Washington, Seattle, WA,

United States

92. Vorticoacoustic Stability Analysis of the Bidirectional

Vortex Engine

Poster Presentation. IMECE2018-89037

Paul Kovacic,

Auburn University, Auburn, AL, United States

93. Analyzing the Interaction of Neural Signals in the

Auditory Brain Structures With Applied Signal Processing

Technologies

Poster Presentation. IMECE2018-89283

Na Zhu, Casey Chisnell,

University of Michigan–Flint, Flint, MI,

United States,

Hao Luo, Jinsheng Zhang,

Wayne State

University, Detroit, MI, United States

16-2 ADVANCED MANUFACTURING

16-2-1 Advanced Manufacturing

11:45am–2:30pm

94. Solution-Gated Ion-Sensitive Field Effect Transistor

With Polymer Selective Membrane for Nitrate Detection

Poster Paper Publication. IMECE2018-87918

Jungyoon Kim, Qingyuan Liu, Tianhong Cui,

University of

Minnesota, Minneapolis, MN, United States

95. Development of a Low Coefﬁcient of Thermal

Expansion Composite Tooling via 3D Printing

Poster Paper Publication. IMECE2018-88594

Pedro Cortes, Michael Maravola, Michael Juhasz, Douglas

Rutana, Bridger Kowalczyk, Brett Conner, Eric Macdonald,

Youngstown State University, Youngstown, OH, United States

96. Dynamic Testing of Polymeric AM Parts With Different

Inﬁll Conditions

Poster Presentation. IMECE2018-88702

Serdar Tumkor, Jonathan Holman, Jace, M. Rearick,

Mitchell, D. Krinock, Joe Doerﬂer,

University of Pittsburgh,

Johnstown, PA, United States

97. Design Innovation in a Water Well Potable Drilling

Machine

Poster Presentation. IMECE2018-88776

Rufus Chime,

Institute of Management and Technology, Enugu

State, Nigeria

98. Design Innovation in Palm Kernel Cracking Machine:

Design for Manufacturing

Poster Presentation. IMECE2018-88777

Rufus Chime,

Institute of Management and Technology, Enugu

State, Nigeria

99. Machining and Bio-Machining Considerations

Poster Presentation. IMECE2018-88989

Satya Prasad Paruchuru,

VNRVJIET, Hyderabad, India

100. Considerations for Bulk-Manufacturing Simulators

Poster Presentation. IMECE2018-88996

Satya Prasad Paruchuru,

VNRVJIET, Hyderabad, India

101. Microscale 3D Printing by Additive Nanoparticle

Assembly for Energy Storage Systems and Biomedical

Devices

Poster Presentation. IMECE2018-89039

Sadeq Saleh, Mark Nicholas, Rit

Bezbaruah, Eric Yttri,

Rahul Panat,

Carnegie Mellon University, Pittsburgh, PA,

United States

102. Integrative Additive Manufacturing for Hermetically

Sealed Functional Components

Poster Presentation. IMECE2018-89992

Marquese Pollard,

Florida Agricultural and Mechanical

University, Tallahassee, FL, United States

16-4 BIOMEDICAL & BIOTECHNOLOGY

ENGINEERING

16-4-1 Biomedical & Biotechnology Engineering

11:45am–2:30pm

103. Estimation Method of 3D Position of Guidewire in

Endovascular Treatment

Poster Paper Publication. IMECE2018-86392

Hirohito Yamamoto,

Yamaguchi University, Yamaguchi,

Japan,

Koji Mori, Takashi Saito, Hiroko Kadowaki,

Yamaguchi University, Ube/Yamaguchi, Japan

104. The Effect of Shoe Sole Stiffness on Trunk Lean

Poster Presentation. IMECE2018-86496

Garrett Sutton, Matthew Yough, Travis Schmeling, Casey

Vollmer, Abdulhamid Khawajah, Anne Schmitz,

Gannon

University, Erie, PA, United States

TRACK  VIRTUAL PODIUM

(

POSTERS

)–

WEDNESDAY, NOVEMBER 

231

105. A Numerical Bioheat Transfer Model to Estimate Time

of Death With Application in Forensic Science

Poster Presentation. IMECE2018-86614

Saeed Tiari, Madeline Carnell, Rebecca Red Horse, Olivia

Rose,

Gannon University, Erie, PA, United States

106. Computational Study of Onset Dynamics in Neuron-

Spiking With Threshold Adaptation

Poster Paper Publication. IMECE2018-86689

Loabat Shojaei Kavan, Abhijeet Wadkar, Samuel

Asokanthan,

University of Western Ontario, London, ON,

Canada

107. Reproduction Analysis of Injury Condition Using Finite

Element Modeling of the Head in Cases With Traumatic

Higher Brain Dysfunction Caused by Trafﬁc Accidents

Poster Paper Publication. IMECE2018-86945

Shigeto Hayashi,

Hyogo Emergency Medical Center,

Japanese Red Cross Kobe Hospital, KOBE, Japan,

Hiromichi

Nakadate,

Shinshu University, Ueda, Japan,

Yuelin Zhang,

Sophia University, Tokyo, Japan,

Kojiro Mekata, Haruo

Yamashita,

Japanese Red Cross Kobe Hospital, Kobe, Japan,

Shinichi Nakayama,

Hyogo Emergency Medical Center, Kobe,

Japan,

Eiji Kohmura,

Kobe University, Kobe, Japan,

Yasuhiro

Matsui,

National Trafc Safety and Environment Laboratory,

Chofu, Japan,

Hong Ji,

Beijing Computing Center, Beijing,

China,

Shigeru Aomura,

Tokyo Metoropolitan University, Hino,

Japan

108. Development of a Low-Cost Hip Flexion Assistive

Device

Poster Presentation. IMECE2018-87101

Grace McGrath, Madeline Carnell, Stacy Joseph, Anne

Schmitz,

Gannon University, Erie, PA, United States

109. Effects of Prosthetic Simulator on Muscle Activity

Poster Presentation. IMECE2018-87161

Olivia Rose, Benjamin Reed, Rebecca Red Horse, Aaron

Mandrake, Mohammed Ashmouni,

Gannon University, Erie,

PA, United States

110. Monte Carlo Simulation for High-k MOSFET

Dosimeters

Poster Presentation. IMECE2018-87170

Hui Niu,

Ansys Inc., Canonsburg, PA, United States

111. Simulation of the Strain Ampliﬁcation in Sulci Due to

Blunt Impact to the Head

Poster Presentation. IMECE2018-88176

Brian Fagan,

ARL WMRD, Adelphi, MD, United States,

Timothy Zhang, Sikhanda S. Satapathy,

ARL WMRD, APG,

MD, United States

112. Developing Activated Carbon From Date Seeds and

Carbon Fiber for Use in Liver Support Devices

Poster Paper Publication. IMECE2018-88233

i Hilal-Alnaqbi, Asel Mwafy, Ameereh Seyedzadeh,

Waleed Ahmed, Aisha Hilal Alnaqbi,

United Arab Emirates

University, Al Ain, United Arab Emir.

113. Development of a Novel 3D Printing for Porous

Bioceramic Scaffolds

Poster Presentation. IMECE2018-88256

Maohua Lin, Yunqing Kang, Chi-tay Tsai, Xuesong Wang,

Florida Atlantic University, Boca Raton, FL, United States

114. In Silico Analysis of the Failure of Uniaxial Testing

Specimens

Poster Presentation. IMECE2018-88381

Ronald Fortunato,

University of Pittsburgh, Venetia, PA,

United States,

Chao Sang, Spandan Maiti, Anne M.

Robertson,

University of Pittsburgh, Pittsburgh, PA, United

States

115. Breaking Bones

Poster Presentation. IMECE2018-88735

Rebekah Eberle, Bashayr Alturkestani, Anne Schmitz,

Gannon University, Erie, PA, United States

116. Development of a Lizard PBT Data Collection

Apparatus

Poster Presentation. IMECE2018-88809

Jeong Tae Ok, Colton Dorion, William Hendrickson, Kennan

Marino, Kevin Tracy, Salim Azzouz, Yu Guo, Charles

Watson,

Midwestern State University, Wichita Falls, TX, United

States

117. Three-Dimensional Full-Field Strain Mapping in Total

Shoulder Replacement

Poster Presentation. IMECE2018-88902

Yuxiao Zhou, Chujie Gong,

Pennsylvania State University,

State College, PA, United States,

Gregory Lewis, April

Armstrong,

Pennsylvania State University, Hershey, PA, United

States,

Jing Du,

Pennsylvania State University, State College,

PA, United States

118. A Microﬂuidics-Based Impedimetric Platform for

Studying Placental Malaria

Poster Presentation. IMECE2018-88995

Jia Liu, Irina Oleinikov, Olga Chesnokov, Yuhao Qiang,

Andrew Oleinikov, Sarah E. Du,

Florida Atlantic University,

Boca Raton, FL, United States

119. Analysis of Precise-Drives for Bio-Instrumentation

Poster Presentation. IMECE2018-88999

Satya Prasad Paruchuru,

VNRVJIET, Hyderabad, India

120. Unconventional Machining Methods for

Bioengineering

Poster Presentation. IMECE2018-89017

Satya Prasad Paruchuru,

VNRVJIET, Hyderabad, India

121. Manufacturing and Maintenance Aspects of Processes

Used for Prostheses

Poster Presentation. IMECE2018-89019

Satya Prasad Paruchuru,

VNRVJIET, Hyderabad, India

TRACK  VIRTUAL PODIUM

(

POSTERS

)–

WEDNESDAY, NOVEMBER 

232

122. Manufacturing and Continuous-Evaluation of Tissue

Poster Presentation. IMECE2018-89078

Satya Prasad Paruchuru,

VNRVJIET, Hyderabad, India

123. Protective Capabilities of Metal-Frame Versus Plastic-

Frame Softball Fielder’s Masks

Poster Presentation. IMECE2018-89084

John Strickland, Grant Bevill,

University of North Florida,

Jacksonville, FL, United States

124. Computational Modeling of Cough and Mucus

Clearance in Patients With Total Laryngectomy Under

Expiratory Muscle Strenth Training

Poster Presentation. IMECE2018-89086

Nadun Kuruppumullage,

University of Central Florida, Oviedo,

FL, United States

125. Robust Control Design for Type 1 Diabetes

Poster Presentation. IMECE2018-89246

Souransu Nandi,

University at Buffalo, State University of New

York, Buffalo, NY, United States,

Tarunraj Singh,

University at

Buffalo, State University of New York, Buffalo, NY, United

States

126. Is Cell Alignment Modulated by Cell-Matrix Interaction

or Cell-Cell Interaction?

Poster Presentation. IMECE2018-89267

Stephen Coyle, Philip R. LeDuc, Kuen Hsia,

Carnegie Mellon

University, Pittsburgh, PA, United States

127. Biological Inspiration From Salt-exclusion in

Mangroves Toward Anti-Biofouling Reverse Osmosis

Membranes

Poster Presentation. IMECE2018-89303

Adam Wood,

Carnegie Mellon University, Verona, PA, United

States,

Kyle Justus, Eric Parigoris, Alan Russell, Philip R.

LeDuc,

Carnegie Mellon University, Pittsburgh, PA, United

States

128. In Situ Bioprinting of Bone Tissue Constructs for

Craniomaxillofacial Repair

Poster Presentation. IMECE2018-89380

Kazim Kerim Moncal,

Pennsylvania State University, State

College, PA, United States

129. 3D Tumor-on-a-Chip With Vasculature for Chemotaxis

Poster Presentation. IMECE2018-89441

Li Wan, Philip R. LeDuc,

Carnegie Mellon University,

Pittsburgh, PA, United States,

Carola Neumann,

University of

Pittsburgh, Pittsburgh, PA, United States

130. Mechanically-Induced Cholesterol Removal From

Macrophage Cells Using Ultrasound

Poster Presentation. IMECE2018-89498

Justin Urso, Chandrakala Aluganti Narasimhulu, Sampath

Parthasarathy, Alain Kassab, Subith Vasu,

University of

Central Florida, Orlando, FL, United States

131. A Nerve-Integrated 3D Tissue on a Chip System to

Study the Brain

Poster Presentation. IMECE2018-89626

Justin Bobo,

Carnegie Mellon University, Pittsburgh, PA,

United States,

Manoj Puthenveedu, Zara Weinberg,

University of Michigan, Ann Arbor, MI, United States,

Philip R.

LeDuc,

Carnegie Mellon University, Pittsburgh, PA, United

States

132. Optimization of Storage Conditions and Evaluation of

Stored Drag Reducing Polymer (DRP) Solutions Used in

Preclinical Animal Studies

Poster Presentation. IMECE2018-89806

Dan Crompton, Sarah Tolaymat, Salim Olia, Marina

Kameneva,

University of Pittsburgh, Pittsburgh, PA, United

States

133. Switching Super Twisting Sliding Mode Controller for

Following Virtual Constraints: Application to a Hybrid

Neuroprosthesis

Poster Presentation. IMECE2018-89892

Vahidreza Molazadeh, Zhiyu Sheng, Nitin Sharma,

University

of Pittsburgh, Pittsburgh, PA, United States

134. PhysioNet-LabView Interface

Poster Presentation. IMECE2018-89959

Andrew-Dave E. Simpson, Douglas E. Dow,

Wentworth

Institute of Technology, Boston, MA, United States

16-5 DESIGN, RELIABILITY, SAFETY, AND

RISK

16-5-1 Design, Reliability, Safety, and Risk

11:45am–2:30pm

135. Analysis of Temperature Sensor Failure Mechanism for

Semiconductor Front-End Equipment Using Finite Element

Models

Poster Presentation. IMECE2018-89533

Seung Il Park, Jacobs Somnic, Changwoon Han,

State

University of New York, Korea, Incheon, Korea (Republic)

136. Emerging Trends in the Measurement of Engineered

Surfaces in Aerospace and Weapons System From Rough

to Nano Measurement Range

Poster Presentation. IMECE2018-89983

Devdas Shetty, Pawan Tyagi,

University of the District of

Columbia, Washington, DC, United States

TRACK  VIRTUAL PODIUM

(

POSTERS

)–

WEDNESDAY, NOVEMBER 

233

16-6 DYNAMICS, VIBRATION, AND

CONTROL

16-6-1 Dynamics, Vibration, and Control

11:45am–2:30pm

137. Commodities and Rail Damage

Poster Paper Publication. IMECE2018-86008

Josè A. Romero,

Queretaro Autonomous University, San Juan

del Rio, Queretaro, Mexico,

Frank Otremba,

Bundesanstalt für

Materialforschung und -prüfung, Berlin, Germany,

Alejandro A.

Lozano-Guzman,

Applied Science and Advanced Technology

Research Center Queretaro Unit, Queretaro, Mexico

138. The Higher Inharmonic Overtone Vibrations of a

Piezoelectric Plate

Poster Presentation. IMECE2018-86622

Zi-Gui Huang,

National Formosa University, Yunlin County,

Taiwan,

Ke-Cheng Zhuang, Chien-Cheng Yang,

Taitien

Electronics Co., Ltd., New Taipei City, Taiwan

139. Vibratory System Identiﬁcation of 3D Printed

Cantilever

Poster Paper Publication. IMECE2018-86840

Daniel Crifasi, Matthew Ergle, Huseyin Ozdes, Edmon

Perkins,

Auburn University, Auburn, AL, United States

140. New Mixed Scheme for Rotor Blade Structural Load

Calculation

Poster Presentation. IMECE2018-88916

Jie Wu,

Jiangsu University of Science & Technology, Zhenjiang,

China

141. Payload Design for Orbital Structural Health

Monitoring Experiments

Poster Presentation. IMECE2018-89430

Arjun Tandon, Daniel Pacheco, Shane McKinney, Michael

Underwood, Carl Bancroft, Douglas MacNinch, John

Sanchez, Andrei Zagrai,

New Mexico Institute of Mining and

Technology, Socorro, NM, United States

142. Bio-Inspired High Aerodynamic Tail for Robot

Reorientation and Stabilization

Poster Presentation. IMECE2018-89710

Cameron Selby,

Carnegie Mellon University, Pittsburgh, PA,

United States,

Amir Patel,

Johns Hopkins University,

Baltimore, MD, United States,

Peter Li, Aaron Johnson,

Carnegie Mellon University, Pittsburgh, PA, United States

143. Spring Mass Model Control for 3D Dynamic Running

on the ATRIAS Biped

Poster Presentation. IMECE2018-89782

Lin Song, William Martin, Hartmut Geyer,

Carnegie Mellon

University, Pittsburgh, PA, United States

16-7 ENGINEERING EDUCATION

16-7-1 Engineering Education

11:45am–2:30pm

144. Design and Control of a High Precision Laser-Cutting

Machine

Poster Paper Publication. IMECE2018-88131

Mason Van Bibber, Behnam Bahr,

California State

Polytechnic University, Pomona, CA, United States

145. Experience of Multiple Instructors About Student

Presentation Based Teaching (SPET) Approach

Poster Paper Publication. IMECE2018-88410

Pawan Tyagi, Morris Thomas, Carl Moore, Pamela

Hampton-Garland, Jiajun Xu, Lara Thompson, Sasan

Haghani,

University of the District of Columbia, Washington,

DC, United States

146. Student Presentation Based Teaching (SPET)

Approach for Classes With Higher Enrollment

Poster Paper Publication. IMECE2018-88463

Pawan Tyagi,

University of the District of Columbia,

Washington, DC, United States

147. A Portable Laboratory for Dynamic Systems and

Controls

Poster Presentation. IMECE2018-89494

Xiaorui Li,

Carnegie Mellon University, Pittsburgh, PA, United

States,

Mark Bedillion,

Carnegie Mellon University, Gibsonia,

PA, United States

148. Use of Advanced Manufacturing for Better Tooling

Performance in the Capstone Experience

Poster Presentation. IMECE2018-89729

Hazel Marie,

Youngstown State University, Boardman, OH,

United States,

Stefan Moldovan,

Youngstown State University,

Youngstown, OH, United States

16-8 ENERGY

16-8-1 Energy

11:45am–2:30pm

149. Optimization of Hot Side Housing Component for a

Rotary Displacer Stirling Engine

Poster Presentation. IMECE2018-87981

William C. Mullins, Amirhossein Bagheri, Phillip R. Foster,

Huseyin Bostanci,

University of North Texas, Denton, TX,

United States

150. Conductive Heating of Li-Ion Batteries at Low

Temperatures

Poster Paper Publication. IMECE2018-88235

Zhibang Xu, Meng Xu, Xia Wang, Peng Zhao,

Oakland

University, Rochester Hills, MI, United States

TRACK  VIRTUAL PODIUM

(

POSTERS

)–

WEDNESDAY, NOVEMBER 

234

151. Development of a Self-Sustaining Water Distillation

System Using Activated Carbon Nanoﬂuids

Poster Presentation. IMECE2018-88756

Ashreet Mishra,

Purdue University Northwest, Hammond, IN,

United States,

A.G. Agwu Nnanna,

University of Texas of the

Permian Basin, Odessa, TX, United States

152. Rack Level Cooling of a Dynamic Cold Plate Using Self

Regulating Flow Control Device

Poster Presentation. IMECE2018-88832

Amrutha Rachakonda, Rajesh Kasukurthy, Dereje

Agonafer,

University of Texas at Arlington, Arlington, TX,

United States

153. Inﬂuence of the Tilt Angle of All-Glass Vacuum Tube

Collectors on the Thermal Performance of Tube Solar

Water Heaters

Poster Presentation. IMECE2018-88985

Elder Mendoza,

Universidad Nacional de Trujillo, Trujillo, Peru

154. Performance Improvement of Cathode Electrodes in

Lithium Ion Batteries by Nanoscale Surface Engineering via

Chemical Vapor Deposition Polymerization

Poster Presentation. IMECE2018-89113

Laisuo Su, Phil M. Smith, B. Reeja-Jayan,

Carnegie Mellon

University, Pittsburgh, PA, United States

155. Numerical and Experimental Investigation of Effects of

Metal Foam on the Melting of PCM Inside a Horizontal

Cylinder

Poster Presentation. IMECE2018-89114

Saurabh Mali, Subrata Sengupta, Suvil C. Kundapur,

Abhishek Mangoli,

University of Michigan Dearborn,

Dearborn, MI, United States

156. Practical Beneﬁt Analysis of Heat Recovery for Multi-

Stage Air Compressors

Poster Presentation. IMECE2018-89160

Yiming Ma, Yi Chu,

FS-Elliott CN Co., Shanghai, China,

Rongxin Zhang, Brad Hayes,

FS-Elliott LLC, Export, PA,

United States,

Xuyang Chi,

FS-Elliott CN Co., Shanghai,

Shanghai, China

157. A Novel Method to Store Thermal Energy in a BTES

System

Poster Presentation. IMECE2018-89275

Seung Joo Lee, Sarng Woo Karng, Jinsoo Park,

Korea

Institute of Science and Technology, Seoungbook-gu, Seoul,

Korea (Republic),

Sungho Choi,

Syngkyunkwan University,

Suwon, Korea (Republic)

158. Analysis of Cytochrome C Oxidase Oxygen Reduction

Reaction to Develop a Catalyst for Hydrogen Fuel Cells

Poster Presentation. IMECE2018-89333

Rudy Torres, Philip R. LeDuc,

Carnegie Mellon University,

Pittsburgh, PA, United States

159. New Decal Transfer Method for the Fabrication of

PGM-Free Polymer Electrolyte Fuel Cell

Poster Presentation. IMECE2018-89375

Yuqi Guo, Leiming Hu, Aman Uddin,

Carnegie Mellon

University, Pittsburgh, PA, United States,

Hanguang Zhang,

Gang Wu,

University at Buffalo, State University of New York,

Buffalo, NY, United States,

Shawn Litster,

Carnegie Mellon

University, Pittsburgh, PA, United States

160. Inﬂuence of Ionomer on Platinum Group Metal-Free

Catalyst Activity as Evaluated by Rotating Disk Electrode

Measurements

Poster Presentation. IMECE2018-89422

Xiaomin Xu, Aman Uddin, Jonathan Braaten,

Carnegie

Mellon University, Pittsburgh, PA, United States,

Hanguang

Zhang, Gang Wu,

University at Buffalo, State University of

New York, Buffalo, NY, United States,

Shawn Litster,

Carnegie

Mellon University, Pittsburgh, PA, United States

161. In-Operando Imaging of Copper Dendrites Growth

Based on Planar Micro-cell Using Ultra-High Resolution X-

ray Computed Tomography

Poster Presentation. IMECE2018-89462

Hanwei Zhou, Tianwen Chen, Paul Choi, Bharathy

Parimalam, Yubai Li, Shawn Litster,

Carnegie Mellon

University, Pittsburgh, PA, United States

162. Design of a Borehole Thermal Energy Storage System

Poster Presentation. IMECE2018-89474

Sarng Woo Karng, Jinsoo Park, Seung Joo Lee,

Korea

Institute of Science and Technology, Seoul, Seoul, Korea

(Republic)

163. CFD Study of the Dual Vertical Axis Wind Turbine

Poster Presentation. IMECE2018-89571

Shreyas P. Shetty,

Manipal Academy of Higher Education,

Hyderabad, Telangana, India

164. Carbon-Based Nanomaterials for Surface Properties

and Energy Storage

Poster Presentation. IMECE2018-89573

Ziyu Zhou, Tongchuan Gao, Paul Leu,

University of

Pittsburgh, Pittsburgh, PA, United States

165. Hardware and Software Development for Telemetry-

Intensive Solar Forecasting

Poster Presentation. IMECE2018-89846

Hugo T.C. Pedro, David Larson, Jeremy Orosco,

University

of California San Diego, La Jolla, CA, United States,

Carlos Coimbra,

University of California, San Diego,

San Diego, CA, United States

166. Direct Spectral Estimation of Cloud Optical Properties

From GOES-R Imagery

Poster Presentation. IMECE2018-89853

David Larson, Mengying Li, Hugo T.C. Pedro,

University

of California, San Diego, La Jolla, CA, United States,

Carlos Coimbra,

University of California, San Diego,

San Diego, CA, United States

TRACK  VIRTUAL PODIUM

(

POSTERS

)–

WEDNESDAY, NOVEMBER 

235

167. Transition Metal Dichalcogenides (TMDs) for

Application as Supercapacitor Electrodes

Poster Presentation. IMECE2018-89877

Kennith Mcloud, Jonathan Turnley, Santanu Mukherjee,

Zhongkan Ren, Gurpreet Singh,

Kansas State University,

Manhattan, KS, United States

168. Optimization of Nano-Texturing Parameters to

Maximize the Light Trapping of Thin Film Solar Cells

Poster Presentation. IMECE2018-90019

Ola Rashwan,

Pennsylvania State University, Middletown, PA,

United States,

Nur Khairina Khairu Najhan, Andrew Newill,

Pennsylvania State - Harrisburg, Middletown, PA, United States

16-9 FLUIDS ENGINEERING

16-9-1 Fluids Engineering

11:45am–2:30pm

169. Modeling and Simulation of Laser Fabrication of

Microﬂuidic Channels

Poster Presentation. IMECE2018-86951

Mohammad Hossan, Matthew Benton, Haley Allen,

Abdellah Ait Moussa,

University of Central Oklahoma,

Edmond, OK, United States

170. Experimental Facility Design for Air-Water Two Phase

Flow Phenomena Measurement in Research Reactor

Cooling System

Poster Presentation. IMECE2018-87308

Ki-Jung Park, Minkyu Jung, Kyoungwoo Seo, Seong Hoon

Kim,

Korea Atomic Energy Research Institute, Daejeon, Korea

(Republic)

171. Numerical Examination of Jets Induced by Multi-

Bubble Interactions

Poster Paper Publication. IMECE2018-87606

Joydip Mondal, Arpit Mishra, Rajaram Lakkaraju,

Parthasarathi Ghosh,

Indian Institute of Technology

Kharagpur, Kharagpur, West Bengal, India

172. Proper Orthogonal Decomposition Applied to a

Convergent Shock Wave Dynamically Interacting With a

Cylindrical Density Interface

Poster Presentation. IMECE2018-88175

Erik Proano, Dongeun Seo, Bertrand Rollin,

Embry-Riddle

Aeronautical University, Daytona Beach, FL, United States

173. Droplet Nucleation and Growth in Cryogenic

Turboexpanders

Poster Paper Publication. IMECE2018-88343

Ashish Alex Sam, Keerthi Raj Kunniyoor, Jayachandran

K.N., Arpit Mishra, Parthasarathi Ghosh,

Indian Institute of

Technology Kharagpur, Kharagpur, West Bengal, India

174. Numerical Analysis of Heat Transfer and Fluid Flow in

Micro-Welding Using CFD

Poster Paper Publication. IMECE2018-86363

Divyaj Shah,

Indian Institute of Technology, Bombay, Pune,

Maharashtra, India,

Chandrashekhar M. Sewatkar,

College of

Engineering, Pune, Pune, Maharashtra, India,

Ketaki Godbole,

Bajaj Auto Ltd., Pune, Pune, Maharashtra, India

16-10 HEAT TRANSFER AND THERMAL

ENGINEERING

16-10-1 Heat Transfer and Thermal Engineering

11:45am–2:30pm

175. Realization of Energy-Saving Glass Using Photonic

Crystals

Poster Presentation. IMECE2018-86185

Yen-Hsiang Chen, Yu-bin Chen,

National Tsing Hua

University, Hsinchu City, Taiwan

176. Experimental Studies of Enhanced Tubes for Flooded

Evaporator Using R-1233zd(E) Refrigerant

Poster Presentation. IMECE2018-86265

Ho Won Byun, Dong Ho Kim, Seok Ho Yoon, Chan Ho Song,

Kong Hoon Lee, Ook Joong Kim,

Korea Institute of

Machinery and Materials, Daejeon, Korea (Republic)

177. Numerical and Experimental Investigations of

Combustion and NOx Emission Characteristics of a 330MW

Utility Boiler With Swirl Burners

Poster Presentation. IMECE2018-86777

Wenhua Liu, Mo Yang,

University of Shanghai for Science and

Technology, Shanghai, China,

Yuwen Zhang, Zheng Li,

University of Missouri, Columbia, MO, United States,

Hong

Jin, Wenshuai Wang,

University of Shanghai for Science and

Technology, Shanghai, China

178. Quantifying Uncertainty in First-Principles Predictions

of Phonon Dispersion Relations

Poster Presentation. IMECE2018-87933

Holden Parks, Venkat Viswanathan, Alan McGaughey,

Carnegie Mellon University, Pittsburgh, PA, United States

179. Visualization of Nanoengineered Coating Longevity

During Condensation

Poster Presentation. IMECE2018-88077

Muhammad Jahidul Hoque, Longnan Li, Nenad Miljkovic,

University of Illinois at Urbana-Champaign, Urbana, IL, United

States

180. Individual Phonon Branch Contribution to Thermal

Conductivity of 3C-SiC Using the Monte Carlo Method

Poster Paper Publication. IMECE2018-88083

Arden Barnes, Nicholas Roberts,

Utah State University,

Logan, UT, United States

TRACK  VIRTUAL PODIUM

(

POSTERS

)–

WEDNESDAY, NOVEMBER 

236

181. Flow and Heat Transfer of Mist/Steam Two-Phase

Flow in Two-Pass Rectangular Channels With Paralleled

and V-Shaped Rib Turbulators

Poster Paper Publication. IMECE2018-88532

Guangwen Jiang, Jianmin Gao, Xiaojun Shi,

Xi’an Jiaotong

University, Xi’an, Shaanxi, China,

Zhao Wang, Yunlong Li,

State Key Laboratory for Manufacturing Systems Engineering,

Xi’an Jiaotong University, Xi’an, China

182. Experimental Investigation of an R134a Loop

Thermosiphon for Shaft Cooling

Poster Paper Publication. IMECE2018-88548

Fajing Li, Jianmin Gao,

Xi’an Jiaotong University, Xi’an,

Shanxi, China,

Liang Xu,

State Key Laboratory for

Manufacturing Systems Engineering, Xi’an Jiaotong University,

Xi’an, Shaanxi, China,

Feng Liang,

Xi’an Jiaotong University,

Xi’an, Shaanxi, China,

Guangwei Jiang,

State Key Laboratory

for Manufacturing Systems Engineering, Xi’an Jiaotong

University, Xi’an, Shaanxi, China

183. Investigation of Cure process of Carbon Epoxy

Composite Block

Poster Presentation. IMECE2018-88758

Kibum Kim, JinSang Yoon,

Chungbuk National University,

Cheoungju, Korea (Republic)

184. Total Variation Regularization for Temperature Field

Reconstruction Based on the Light-Field Imaging

Technique

Poster Presentation. IMECE2018-88786

Xing Huang, Hong Qi, Xiang-Yang An, Li-Ming Ruan,

Harbin

Institute of Technology, Harbin, China

185. The Origin of Hydrophilic Surface Functionalization-

Induced Thermal Conductance Enhancement Across

Solid-Water Interfaces

Poster Presentation. IMECE2018-89075

Dezhao Huang, Ruimin Ma,

University of Notre Dame, South

Bend, IN, United States,

Teng Zhang,

Schrodinger Inc., New

York, NY, United States,

Tengfei Luo,

University of Notre

Dame, Notre Dame, IN, United States

186. Thermal Transport of Fullerene-Based Superatomic

Crystals Controlled by Orientational Disorder

Poster Presentation. IMECE2018-89253

Matthew Bartnof, Alexander D. Christodoulides,

Carnegie

Mellon University, Pittsburgh, PA, United States,

Wee-Liat

Ong,

Zhejiang University, Haining, Zhejiang, China,

Evan

O’Brien, Xavier Roy,

Columbia University, New York, NY,

United States,

Alan McGaughey, Jonathan Malen,

Carnegie

Mellon University, Pittsburgh, PA, United States

187. The Effect of Adhesion Layer on the Thermal Boundary

Conductance

Poster Presentation. IMECE2018-89406

Kiumars Aryana, Rouzbeh Rastgar, David Olson, John

Gaskins, Ashutosh Giri, Pamela M. Norris, Patrick E.

Hopkins,

University of Virginia, Charlottesville, VA, United

States

188. Nanoscale to Megascale Thermal Engineering: A Path

to Sustainable Energy

Poster Presentation. IMECE2018-89715

Bikram Bhatia,

Massachusetts Institute of Technology,

Cambridge, MA, United States

189. Metal Sulﬁdes for Thermochemical Energy Storage

Poster Presentation. IMECE2018-89779

Gwendolyn Wang,

University of California, San Diego, San

Diego, CA, United States

190. Heterogeneous Monolayer Wick Structures for High

Heat Flux Thermal Management Systems

Poster Presentation. IMECE2018-89957

Nathan Albu, Athul J. Pai, Gisuk Hwang,

Wichita State

University, Wichita, KS, United States

191. Enhanced Flow Boiling Using Columnar-Post Wick

Poster Presentation. IMECE2018-89971

Athul J. Pai, Yahya Nasershariﬁ, Gisuk Hwang,

Wichita State

University, Wichita, KS, United States

192. Advanced Passive Thermal Management of Li-Ion

Batteries Operating at Various Environmental Temperatures

Poster Presentation. IMECE2018-89999

Derek Barnes, Xianglin Li,

University of Kansas, Lawrence,

KS, United States

16-11 MATERIALS: GENETICS TO

STRUCTURES

16-11-1 Materials: Genetics to Structures

11:45am–2:30pm

193. Metal-Organic-Frameworks as Efﬁcient

Electrocatalysts for Oxygen Evolution Reaction: Insights

Into the Active Centers

Poster Presentation. IMECE2018-86176

Chun-Yu Lin,

University of North Texas, Denton, TX, United

States,

Shuangyin Wang,

Hunan University, Changsha, China,

Zhenhai Xia,

University of North Texas, Denton, TX, United

States

194. Molecular Dynamics Simulation for Dislocation on

Lead Titanate Films

Poster Presentation. IMECE2018-86882

Cooper Gray, Razak Adeniji, Zhi Wang,

University of St.

Thomas, St. Paul, MN, United States,

Jeong Ho You,

University of St. Thomas, Woodbury, MN, United States

195. First-Principle Investigation of Structural, Elastic,

Electronic and Thermal Properties of Dysprosium Hafnate

Oxides

Poster Paper Publication. IMECE2018-87099

Hui Niu,

Ansys Inc., Canonsburg, PA, United States

TRACK  VIRTUAL PODIUM

(

POSTERS

)–

WEDNESDAY, NOVEMBER 

237

196. Effect of Nano Silica on Compressive Strength of

Concrete

Poster Paper Publication. IMECE2018-87799

Waleed Ahmed,

United Arab Emirates University, Al Ain,

United Arab Emir.,

Wail Al-Rifaie, Abdalmjeed Alawaneh,

Mohammed Al-Bajawi,

Philadelphia University, Amman,

Jordan

197. Study of Buckling of Plate Under Shear Compared

Under Compression Results

Poster Presentation. IMECE2018-87986

Sadek Salem Cherif,

University of Sciences and Technology

of Oran Mohamed Boudiaf, Tizi-Ouzou, Algeria

198. Effect of Stress Triaxiality on Creep Deformation and

Damage in Mod.9Cr-1Mo Steel

Poster Presentation. IMECE2018-88957

Katsutaka Yamada,

Chiba Institute of Technology, Funabashi,

Chiba, Japan,

Takashi Ogata,

Chiba Institute of Technology,

Chiba, Japan

199. Creep Strength Evaluation of Long-Term Used Welded

Joint on Mod.9Cr-1Mo Steel by Using a Miniature

Specimen

Poster Presentation. IMECE2018-89002

Hiroki Yamazaki,

Chiba Institute of Technology, Narashino,

Japan,

Takashi Ogata,

Chiba Institute of Technology, Chiba,

Japan

200. Investigation of Mechanical Strength of Gallium Based

Alloys

Poster Presentation. IMECE2018-89094

Courtney Titus, Stephen P. Stagon,

University of North

Florida, Jacksonville, FL, United States

201. Crack Paths in Anisotropic Biomimetic Composites

Textured by Magnetic Nanoparticles

Poster Presentation. IMECE2018-89964

Chunzhou Pan, Ata Mesgarnejad, Sandra Shefelbine,

Alain Karma, Randall Erb,

Northeastern University, Boston,

MA, United States

16-12 MECHANICS OF SOLIDS,

STRUCTURES AND FLUIDS

16-12-1 Mechanics of Solids, Structures and Fluids

11:45am–2:30pm

202. Experimental Investigation on Dynamic Fracture

Behavior of 5A06 Aluminum Alloy

Poster Presentation. IMECE2018-88879

Peng Ren,

Jiangsu University of Science & Technology,

Zhenjiang, China

203. Development of a Moving Window Molecular

Dynamics Framework to Model Shock Wave Interaction

at Microstructural Features

Poster Presentation. IMECE2018-89306

Alexander Davis, Vinamra Agrawal,

Auburn University,

Auburn, AL, United States

204. Mesoscopic Modelling of Carbon Nanotube Thin Films

With Covalent Cross-Links

Poster Presentation. IMECE2018-89373

Md. Abu Horaira Banna, Alexey Volkov,

University of

Alabama, Tuscaloosa, AL, United States

205. Modifying the Mechanical Response of a Cold

Drawing Polymer Film by the Addition of a Perfectly

Bonded Hyperelastic Layer

Poster Presentation. IMECE2018-89377

Rahul Gopalan Ramachandran, Hariharakrishnan S.,

Steven D. Abramowitch, Spandan Maiti, Sachin S. Velankar,

University of Pittsburgh, Pittsburgh, PA, United States

206. Simple Model for Tool Interaction on a Continuously

Deformable Environment

Poster Presentation. IMECE2018-89452

Wooshik Kim, Aaron Johnson,

Carnegie Mellon University,

Pittsburgh, PA, United States

207. Computational Modeling of Electrically Actuated

Shape Memory Polymers

Poster Presentation. IMECE2018-89927

Midhan Siwakoti, Russell Mailen,

Auburn University, Auburn,

AL, United States

16-13 SOCIETY-WIDE MICRO AND

NANOTECHNOLOGY FORUM

16-13-1 Society-Wide Micro and Nanotechnology

Forum

11:45am–2:30pm

208. Systematic Analysis of Pattern Precision and

Uniformity in Roll-to-Roll Colloidal Assembly System

Poster Presentation. IMECE2018-88840

I-Te Chen, Elizabeth Schappell, Xiaolong Zhang, Chih-Hao

Chang,

North Carolina State University, Raleigh, NC, United

States

209. Tensile Properties of P3HT:PCBM Bulk-heterojunction

Thin Films by Coarse-Grained Molecular Dynamics

Poster Presentation. IMECE2018-88872

Joydeep Munshi, Ganesh Balasubramanian,

Lehigh

University, Bethlehem, PA, United States

210. Role of Processing on the Morphology of P3HT:PCBM

Bulk-Heterojunction Thin Films by Coarse-grained

Molecular Simulations

Poster Presentation. IMECE2018-88873

Joydeep Munshi,

Lehigh University, Bethlehem, PA, United

States,

Umar Farooq Ghumman, Akshay Iyer,

Northwestern

University, Evanston, IL, United States,

Rabindra Dulal,

University of Wyoming, Laramie, WY, United States,

Wei Chen,

Northwestern University, Evanston, IL, United States,

TeYu

Chien,

University of Wyoming, Laramie, WY, United States,

Ganesh Balasubramanian,

Lehigh University, Bethlehem, PA,

United States

TRACK  VIRTUAL PODIUM

(

POSTERS

)–

WEDNESDAY, NOVEMBER 

238

211. Role of Polydispersity on the Morphology of

P3HT:PCBM Organic Solar Cells by Coarse-Grained

Molecular Simulations

Poster Presentation. IMECE2018-88874

Joydeep Munshi,

Lehigh University, Bethlehem, PA, United

States,

Umar Farooq Ghumman, Akshay Iyer,

Northwestern

University, Evanston, IL, United States,

Rabindra Dulal,

University of Wyoming, Laramie, WY, United States,

Wei Chen,

Northwestern University, Evanston, IL, United States,

TeYu

Chien,

University of Wyoming, Laramie, WY, United States,

Ganesh Balasubramanian,

Lehigh University, Bethlehem, PA,

United States

212. Large-Scale Dynamic Energy Driven Assembly of Two-

Dimensional Layered Materials on Polymer Substrate

Poster Presentation. IMECE2018-88882

Dong Zhou, Bo Li,

Villanova University, Villanova, PA, United

States

213. Magnetically Actuated Dynamic Iridescence Inspired

by the Neon Tetra

Poster Presentation. IMECE2018-88898

Zhiren Luo,

North Carolina State University, Raleigh, NC,

United States,

Benjamin Evans,

Elon University, Elon, NC,

United States,

Chih-Hao Chang,

North Carolina State

University, Raleigh, NC, United States

214. The Stability and Diffusion of Lithium Affected by a 60°

Shufﬂe Dislocation in Silicon

Poster Presentation. IMECE2018-88923

Wei Z

hao,

Jiangsu University of Science and Technology, Zhen

Jiang, China

215. Heat Transfer Across 3C-SiC-Water Interfaces: Solid-

Liquid Afﬁnity, Interfacial Structuring, and Spectral

Characteristics

Poster Presentation. IMECE2018-88943

C. Ulises Gonzalez-Valle,

Pennsylvania State University, State

College, PA, United States,

Bladimir Ramos,

Pennsylvania

State University, University Park, PA, United States

216. Determining Inﬂuential Descriptors for Polymer Chain

Conformation Based on Empirical Force-Fields and

Molecular Dynamics Simulations

Poster Presentation. IMECE2018-88958

Ruimin Ma,

University of Notre Dame, South Bend, IN, United

States,

Tengfei Luo,

University of Notre Dame, Notre Dame,

IN, United States

217. Multiscale Modeling of PEEK Using Reactive

Molecular Dynamics Modeling and Micromechanics

Poster Presentation. IMECE2018-88967

ll Pisani, Matthew Radue,

Michigan Technological

University, Houghton, MI, United States,

Sorayot

Chinkanjanarot,

National Metals and Materials Technology

Center, Khlong Nueng, Pathum Thani, Thailand,

Brett A.

Bednarcyk, Evan Pineda,

NASA Glenn Research Center,

Cleveland, OH, United States,

Kevin Waters, Ravindra

Pandey, Julie King, Gregory Odegard,

Michigan

Technological University, Houghton, MI, United States

218. Demonstration of the Magnetic Polaritons in Deep Al

Gratings in Off-Plane Layout

Technical Presentation. IMECE2018-88977

Peiyan Yang, Zhuomin Zhang,

Georgia Institute of

Technology, Atlanta, GA, United States,

Hong Ye,

University of

Science and Technology of China, Hefei, China

219. Achieving Low Lattice Thermal Conductivity by

Stereochemically Activating Lone-Pair Electrons: A Case

Study of Boron Arsenide

Technical Presentation. IMECE2018-89003

Guangzhao Qin,

University of South Carolina, Columbia, SC,

United States,

Zhenzhen Qin,

Zhengzhou University,

Zhengzhou, Henan, China,

Huimin Wang,

Northeastern

University, Shenyang, Liaoning, China,

Ming Hu,

University of

South Carolina, Columbia, SC, United States

220. External Electric Field Driving the Ultra-Low Thermal

Conductivity of Silicene

Technical Presentation. IMECE2018-89004

Guangzhao Qin, Ming Hu,

University of South Carolina,

Columbia, SC, United States

221. A Modiﬁed Theoretical Model to Accurately Account

for Interfacial Roughness in Predicting the Interfacial

Thermal Conductance

Poster Presentation. IMECE2018-89040

Yingying Zhang,

University of Minnesota, St. Paul, MN, United

States,

Dengke Ma, Yi Zang,

Huazhong University of Science

and Technology, Wuhan, China,

Xiaojia Wang,

University of

Minnesota, Minneapolis, MN, United States,

Nuo Yang,

Huazhong University of Science and Technology, Wuhan,

Hubei, China

222. Thermal Transport in ZnO Nanocrystal Networks

Synthesized by Nonthermal Plasma

Poster Presentation. IMECE2018-89041

Xuewang Wu, Ben Greenberg,

University of Minnesota,

Minneapolis, MN, United States,

Yingying Zhang,

University of

Minnesota, St. Paul, MN, United States,

Uwe Kortshagen,

James Kakalios, Eray S. Aydil, Xiaojia Wang,

University of

Minnesota, Minneapolis, MN, United States

223. Enhancing Light Transmission in Nacre-Inspired

Multilayer Composites Using Interfacial Nanostructures

Poster Presentation. IMECE2018-89093

Yi-An Chen, Chih-Hao Chang,

North Carolina State

University, Raleigh, NC, United States,

Sharan/S.V. Naidu,

GlobalFoundries, Raleigh, NC, United States,

Zhiren Luo,

North Carolina State University, Raleigh, NC, United States

224. Failure Prediction Using Gibbs Formulation of Granular

Micromechanics

Poster Presentation. IMECE2018-89208

Anil Misra, Rizacan Sarikaya,

University of Kansas,

Lawrence, KS, United States,

Payam Poorsolhjouy,

Purdue

University, West Lafayette, IN, United States

TRACK  VIRTUAL PODIUM

(

POSTERS

)–

WEDNESDAY, NOVEMBER 

239

225. Tunable Near-Field Radiative Heat Transfer by

Electrically Gating Monolayer Graphene

Poster Presentation. IMECE2018-89214

Xiaoyan Ying, Liping Wang,

Arizona State University, Tempe,

AZ, United States

226. Thermochromic VO2-Based Variable Emittance

Coatings for Spacecraft Thermal Control

Poster Presentation. IMECE2018-89217

Sydney Taylor, Liping Wang,

Arizona State University, Tempe,

AZ, United States

227. Combined Effects of Liquid Wicking and

Hydrodynamic Instability on Pool Boiling Critical Heat Flux

by Two-Tier Structures of Nanowires and Microgrooves

Poster Presentation. IMECE2018-89226

Guanglei Chen, Calvin Hong Li,

Villanova University,

Villanova, PA, United States

228. Local Measurement of the Evaporative Heat Transfer

Coefﬁcient in Thin Films Using Frequency Domain

Thermoreﬂectance

Poster Presentation. IMECE2018-89250

Xiaoman Wang, Xiaoyue Zhao, Alan McGaughey, Jonathan

Malen,

Carnegie Mellon University, Pittsburgh, PA, United

States

229. Synthesis and Characterization of Electrodeposited

Ni-Co Core-Shell Nanowires

Poster Presentation. IMECE2018-89321

Ali Shiave,

University of North Carolina at Greensboro,

Greensboro, NC, United States,

Ram Mohan,

North Carolina

A&T University, Greensboro, NC, United States

230. Additive Manufacturing of Multi-Material Micro

Structural Features—Comparison of Print Part Quality and

Characteristics From Voxel and Stereolithography Digital

Designs

Poster Presentation. IMECE2018-89332

rkan Ulu, Ravi Pratap Singh Tomar, Ram Mohan,

North

Carolina A&T University, Greensboro, NC, United States

231. Additive Manufacturing Aids the Veriﬁcation of

Granular Micromechanics Model

Poster Presentation. IMECE2018-89340

Nima Nejadsadeghi, Anil Misra,

University of Kansas,

Lawrence, KS, United States

232. Tunable Granular Metamaterials Based Upon Wave

Propagation Analysis Using Granular Micromechanics

Poster Presentation. IMECE2018-89342

Nima Nejadsadeghi, Anil Misra,

University of Kansas,

Lawrence, KS, United States

233. Experimental Measurement of the Spectrum of Near-

Field Thermal Emission

Poster Presentation. IMECE2018-89369

Saman Zare, Carl Tr

ipp, Sheila Edalatpour,

University of

Maine, Orono, ME, United States

234. Wavevector and Polarization Resolved Analysis of

Phonon Scattering From Embedded Nanoparticles

Technical Presentation. IMECE2018-89410

Rohit Kakodkar, Joseph P. Feser,

University of Delaware,

Newark, DE, United States

235. Thermal Transport Across Gallium Oxide/Metal

Interfaces

Poster Presentation. IMECE2018-89509

Henry Aller, Alan McGaughey, Jonathan Malen, Andrew

Gellman, Xiaoxiao Yu,

Carnegie Mellon University, Pittsburgh,

PA, United States

236. Microﬂuidics to Study Multiscale Porosity

Poster Presentation. IMECE2018-89559

Mohammad Mehdi Salek,

ETH Zurich, Zurich, Switzerland,

Jiande Zhou, E

PFL, Lausanne, Switzerland,

Roman Stocker,

Joaquin Jimenez-Martinez,

ETH Zurich, Zurich, Switzerland

237. Mechanical and Electrostatic Properties of Synthetic

Collagen Molecules via Molecular Dynamics Modeling

Poster Presentation. IMECE2018-89568

Atul Rawal, Kristen Rhinehardt, Ram Mohan,

North Carolina

A&T University, Greensboro, NC, United States

238. Laser-Induced Surface Treatment of PMMA for

Capillary Driven Flows

Poster Presentation. IMECE2018-89601

Md. Shamim Mahmud, Bahador Farshchian,

Texas State

University, San Marcos, TX, United States,

Hakjin Kim,

Convert, Chuncheon, Korea (Republic),

Hyunghoon Kim,

Boditech Med, Chuncheon, Korea (Republic),

Heonyoung

Kim,

Kangwon National University, Chuncheon, Korea

(Republic),

Namwon Kim,

Texas State University, San Marcos,

TX, United States

239. Mechanical Behavior of Cement Paste at Nanoscale—

Experimental Characterization and Reactive Molecular

Dynamics Modeling

Poster Presentation. IMECE2018-89606

Ingrid Padilla Espinosa, Ram Mohan,

North Carolina A&T

University, Greensboro, NC, United States

240. Suspended Thermo-Reﬂectance Measurements of the

Thermal Properties of Silicon Micro- and Nano-Cantilever

Beams

Poster Presentation. IMECE2018-89657

Dipta Sarkar, Zayd Leseman,

Kansas State University,

Manhattan, KS, United States

241. Deformable Shallow Microﬂuidics: Fluid Flow

Rectiﬁcation and Novel Particle Manipulation Platform

Poster Presentation. IMECE2018-89661

Aryan Mehboudi, Junghoon Yeom,

Michigan State University,

East Lansing, MI, United States

242. Tailoring the Property of Nanocomposites Using Nickel

Coated Carbon Nanotube and magnetic Field

Poster Presentation. IMECE2018-89678

Ahmed M. Abdalla, Rakesh Sahu, Ishwar K. Puri,

McMaster

University, Hamilton, ON, Canada

TRACK  VIRTUAL PODIUM

(

POSTERS

)–

WEDNESDAY, NOVEMBER 

240

243. In Situ Contactless 3D Printing of Cellular Structures

Poster Presentation. IMECE2018-89701

Sarah Mishriki, Abdel Rahman Abdel Fattah, Elvira Meleca,

McMaster University, Hamilton, ON, Canada,

Tobias

Kammann,

Friedrich Schiller University Jena, Jena, Germany,

Rakesh Sahu, Fei Geng, Ishwar K. Puri,

McMaster University,

Hamilton, ON, Canada

244. Magnetic Antibody Functionalized Carbon Nanotube

Ink for Rapid Printing of Biosensors

Poster Presentation. IMECE2018-89703

Sarah Mishriki, Abdel Rahman Abdel Fattah, Ahmed M.

Abdalla, Elvira Meleca, Fei Geng, Suvojit Ghosh, Ishwar K.

Puri,

McMaster University, Hamilton, ON, Canada

245. Energy Efﬁcient Metal Mesh Fog Filters to

Simultaneously Harness Atmospheric Fog-Water and

Remove VOCs

Poster Presentation. IMECE2018-89736

Ritwick Ghosh, Rakesh Sahu, Igor Zhitomirsky,

McMaster

University, Hamilton, ON, Canada,

Ranjan Ganguly,

Jadavpur

University, Kolkata, West Bengal, India,

Ishwar K. Puri,

McMaster University, Hamilton, ON, Canada

246. Spatial Mapping and Analysis of Thermal Boundary

Conductance of Metal–MoSe2 Interfaces Using Time-

Domain Thermoreﬂectance

Poster Presentation. IMECE2018-89754

David B. Brown,

Georgia Institute of Technology, Atlanta, GA,

United States,

Xufan Li, Kai Xiao, David B. Geohegan,

Oak

Ridge National Laboratory, Oak Ridge, TN, United States,

Satish Kumar,

Georgia Institute of Technology, Atlanta, GA,

United States

247. Hundred-Fold Enhancement in Far-Field Radiative

Heat Transfer Over the Blackbody Limit

Poster Presentation. IMECE2018-89796

Dakotah Thompson, Linxiao Zhu, Rohith Mittapally, Seid

Sadat,

University of Michigan, Ann Arbor, MI, United States,

Zhen Xing, Patrick McArdle, Mumtaz Qazilbash,

College of

William and Mary, Williamsburg, VA, United States,

Pramod

Sangi Reddy, Edgar Meyhofer,

University of Michigan, Ann

Arbor, MI, United States

248. Advanced FeOOH-MWCNTS Composite Negative

Electrodes With High Areal Capacitance for Asymetric

Supercapacitors

Poster Presentation. IMECE2018-89817

Ri Chen, Rakesh Sahu, Igor Zhitomirsky, Ishwar K. Puri,

McMaster University, Hamilton, ON, Canada

249. Conversion of Heat to Electricity Using a Nano Gap

Near-Field Thermophotovoltaic Device

Poster Presentation. IMECE2018-89852

Linxiao Zhu, Anthony Fiorino, Dakotah Thompson, Rohith

Mittapally, Pramod Sangi Reddy, Edgar Meyhofer,

University

of Michigan, Ann Arbor, MI, United States

250. Transient Thermoreﬂectance Techniques for

Measuring Thermal Conductivity

Poster Presentation. IMECE2018-89886

Jihoon Jeong, Yaguo Wang,

University of Texas at Austin,

Austin, TX, United States

251. Comparison of Friction in Graphene Wrapped

Nanodiamond and Graphitized Nanodiamond

Poster Presentation. IMECE2018-89914

Srilok Srinivasan,

Iowa State University, Ames, IA, United

States,

Diana Berman,

University of North Texas, Denton, TX,

United States,

Ganesh Balasubramanian,

Lehigh University,

Bethlehem, PA, United States,

Subramanian K.R.S.

Sankaranarayanan,

Argonne National Laboratory, Lemont, IL,

United States,

Ali Erdemir,

Argonne National Laboratory,

Argonne, IL, United States,

Anirudha Sumant,

Argonne

National Laboratory, Lemont, IL, United States

252. Thermal Conductivity of Ga Doped Crystalline Si Using

Molecular Dynamics

Poster Presentation. IMECE2018-89939

Sri

lok Srinivasan,

Iowa State University, Ames, IA, United

States,

Ganesh Balasubramanian,

Lehigh University,

Bethlehem, PA, United States,

Zayd Leseman,

Kansas State

University, Manhattan, KS, United States

253. Atomistic Modeling of Wetting and Evaporation on

Nanostructured Printed Graphene

Poster Presentation. IMECE2018-89963

Srilok Srinivasan,

Iowa State University, Ames, IA, United

States,

Ganesh Balasubramanian,

Lehigh University,

Bethlehem, PA, United States,

Suprem Das,

Kansas State

University, Manhattan, KS, United States

254. Heat Transport Mechanism in 2D Hybrid Perovskite

Poster Presentation. IMECE2018-89972

Md. Abu Jafar Rasel, Joseph P. Feser,

University of

Delaware, Newark, DE, United States

16-14 BEST STUDENT POSTER

COMPETITION ON COMPUTATIONAL

MECHANICS

16-14-1 Best Student Poster Competition on

Computational Mechanics

11:45am–2:30pm

255. Peridynamic Modeling of Intergranular Corrosion

Damage

Poster Presentation. IMECE2018-86735

Siavash Jafarzadeh,

University of Nebraska–Lincoln, Lincoln,

NE, United States,

Ziguang Chen,

Huazhong University of

Science and Technology, Wuhan, Hubei, China,

Florin Bobaru,

University of Nebraska–Lincoln, Lincoln, NE, United States

TRACK  VIRTUAL PODIUM

(

POSTERS

)–

WEDNESDAY, NOVEMBER 

241

256. Dynamic Fracture at an Interface: A Peridynamic

Analysis

Poster Presentation. IMECE2018-86936

Javad Mehrmashhadi, Quang Le, Florin Bobaru,

University

of Nebraska–Lincoln, Lincoln, NE, United States

257. Sharp Volumetric Billboard Based Multilevel Multigrid

Method

Poster Presentation. IMECE2018-88073

Dewen Yushu, Karel Matouš,

University of Notre Dame,

Notre Dame, IN, United States

258. Peridynamic Modelling of Crack Nucleation

Poster Presentation. IMECE2018-88164

Sina Niazi, Florin Bobaru,

University of Nebraska–Lincoln,

Lincoln, NE, United States

259. The Peridynamic Coupling of Fracture, Diffusion, and

Corrosion

Poster Presentation. IMECE2018-88218

Jiangming Zhao, Siavash Jafarzadeh,

University of

Nebraska–Lincoln, Lincoln, NE, United States,

Ziguang Chen,

Huazhong University of Science and Technology, Wuhan,

Hubei, China,

Florin Bobaru,

University of Nebraska–Lincoln,

Lincoln, NE, United States

260. Multiresolution Modeling and Error Control With an

Adaptive Wavelet Algorithm

Poster Presentation. IMECE2018-88289

Cale Harnish, Karel Matouš,

University of Notre Dame,

Notre Dame, IN, United States,

Daniel Livescu,

Los Alamos

National Lab, Los Alamos, NM, United States

261. Impact Induce Behavior of HTPB/HMX Based

Energetic Materials Using Cohesive Finite Element Method

Poster Presentation. IMECE2018-88950

Ayotomi Olokun, Chandra Prakash, Ibrahim Gunduz,

Vikas Tomar,

Purdue University, West Lafayette, IN, United

States

262. Lone-Pair Electrons Lead to Strong Phonon

Anharmonicity and Anomalous Strain Enhancement of

Thermal Conductivity

Poster Presentation. IMECE2018-89005

Guangzhao Qin, Ming Hu,

University of South Carolina,

Columbia, SC, United States

263. Multiscale Fracture Simulation Based on Coupled

Space-Time Finite Element Method and Peridynamics

Poster Presentation. IMECE2018-89258

Rui Zhang, Shogo Wada, Clint Nicely, Qian Qian,

University

of Texas at Dallas, Richardson, TX, United States

TRACK  VIRTUAL PODIUM

(

POSTERS

)–

WEDNESDAY, NOVEMBER 

242