bluetooth Car Charger BC52L Manual
Thank you for purchasing our bluetooth car
charger! In order to have a best performance
experience, please read the manual carefully before
use!
I. Product introduction
This product is a car-specific car bluetooth player,
built-in advanced bluetooth and WMA.MP3, WAV,
FLAC.APE decoder chip, can play music files inside
U disk, wirelessly transmitted to car audio, no need to
modify your car can easily Make your music enjoy
while driving. More important is the purity and clarity
of the special sound of DSP technology. We hope to
bring you unlimited enjoyment of the music.
II. Schematic Appearance
Description
:
1. MIC
2. USB1: U disk music player
3. Short press: Previous/Long press to enter mode
switching (BT/USB/TF)
4. LED display
5. USB2: 2.4A/5V Output
6. Short press: next song / long press to enter
FM mode
7. Play / pause / answer / call back / Long press
to wake-up SIRI / Left and right rotation to adjust
the volume
8. Short press the colorful light button to
switch/breathing mode
9. LED lampshade
10. TF card slot
11. Cigarette point and shrapnel
III. Features
1. Support all types of vehicles
2. LED dispaly
3. Support stereo FM transmission technology
4. Support U disk music player
5. Support TF card music player
6. Support WMA, MP3, WAV, FLAC, APE music
format files
7. Automatic power off memory function
8. bluetooth supports A2DP, AVRCP, HFP, HSP
9. bluetooth V5.0
10. bluetooth hands-free calling
11. Support DSP technology
12. Support two mobile Phones Connection at
the same time
VI. Operation instructions
4.1.1 Insert the machine into the cigarette lighter
of the car. After power supply, the product will
automatically enter the power-on state. LED
display: HI---battery voltage---bluetooth--FM
frequency.
4.1.2 Turn on your car FM radio, and adjust the
frequency of product same as your car radio,
then your can enjoy music from your car stereo.
4.1.3 Adjust the FM frequency:
Long press to enter state,
Then press and to adjust the frequency
from the FM 87.5 to 108.0Mhz, three seconds
without operation to exit the FM state.
4.2 bluetooth Hand-free and phone pairing
When you first use your mobile phone to
connect with bluetooth hands-free, your mobile phone
needs to connect with bluetooth hands-free codes.
For the specific operation of mobile phone matching,
please refer to the instructions of mobile phone and
bluetooth device codes.
1. Please open bluetooth on your mobile phone and
search for the device “BC52” from phone menu list.
2. Choose the device “BC52”
3. Choose “BC52” in menu of phone and select the
connection as “hands-free device” in the authorized
device.
4.To connect your second phone,close current
phone’s bluetooth. Then search and connect the
“BC52” with your second phone. After that, reopen
first phone’s bluetooth to reconnect to car kit. (Note:
the last phone reconnect to car kit is the main phone)
5.Turn on the phone music player to play music on
your main phone via bluetooth, and click the phone
button to control the music to pause/play.
6.Short press the phone button to answer/hang
up,long press to reject.Double-click to redial main
phone last call , and long press the mode key to
switch to private answer after the call is connected.
Note:Only the main phone’s last call number on the
call list can be redialed
Matching connection for additional devices
At boot time, the bluetooth car hands free will only
automatically start connecting to the matching device
that was connected last time.
Note: Some phones can be automatically connected
when the bluetooth car is powered on again. Some
phones may need to grant permission for each
connection. You can set it to “Automatically connect.”
For more information, please refer to the phone's user
manual.
4.3 Use bluetooth hands-free calling
(When your bluetooth hands free is idle or playing
music)
4.3.1 dial number
In the connected state, the phone number is directly
dialed out by the mobile phone, and the sound is
automatically sent from the car audio speaker.