VEHICLE CONTROLS
n Customizing Door Lock/Unlock Settings
Customize the auto door-lock settings to your preference. Begin with the vehicle in
Park (CVT models) or with the parking brake set (manual transmission models).
Steps OffDrive Lock Mode
*1
1
*1: Default setting
*2: Models without smart entry system
*3: Models with smart entry system
Apply the parking brake.
2
Move the shift lever to P .
Open the driver’s door.
3
The driver’s door must be closed at this stage.
4 —
5
Move the shift lever out of (P with the brake pedal depressed.
Turn the ignition switch to ON
*2
.
Push the ENGINE START/STOP button twice without depressing the brake pedal
*3
.
6 —
Move the shift lever to (P .
Press and hold the front of the master door lock switch on the driver’s door. You will hear a click more than ve seconds elapsed.
Release the switch.
Continuously variable transmission models
Continuously variable transmission models
Continuously variable transmission models
7
Turn the ignition switch to OFF within 20 seconds
*2
.
Push the ENGINE START/STOP button once without depressing the brake pedal
*3
.
Customization is completed.
All doors unlock and all turn signals blink three times.
Steps Off
1
Park Unlock Mode
Driver Door Open Unlock Mode
*1
Apply the parking brake.
2
Move the shift lever to (P .
3
Open the driver’s door.The driver’s door must be closed at this stage.
—
4
Move the shift lever out of (P with the
brake pedal depressed.
5
Turn the ignition switch to ON (
*2
.
Push the ENGINE START/STOP button twice without depressing the brake pedal
*3
.
6 —
Move the shift lever to (P .
Press and hold the rear of the master door lock switch on the driver’s door. You will hear a click more than ve seconds elapsed.
Release the switch.
Continuously variable transmission models
Continuously variable transmission models
Continuously variable transmission models
Continuously variable transmission models
7
Customization is completed.
All doors lock and all turn signals blink three times.
Turn the ignition switch to OFF
( within 20 seconds
*2
.
Push the ENGINE START/STOP button once without depressing the brake pedal
*3
.
*1: Default setting
*2: Models without smart entry system
*3: Models with smart entry system
Customizing lock settings (models with color audio)
Customizing unlock settings (models with color audio)
VEHICLE CONTROLS
Walk Away Auto Lock*
When you walk away from the vehicle while carrying the remote transmitter, the
doors can automatically lock if the following conditions are met:
• The remote transmitter is within a range of 5 feet (1.5 m).
• All doors and the tailgate are closed.
• There is not an additional remote transmitter inside the vehicle.
Follow these steps (see diagram):
1. Exit the vehicle, close the door and stay near it.
Listen for a beep. The system is activated.
2. Walk at least 5 feet (1.5 m) away.
3. Listen for a beep and look for the lights to flash.
The doors lock.
To turn on this feature, follow the steps below. The
vehicle must be in Park (P).:
1. From the HOME screen, select Vehicle Settings.
2. Select Door Setup.
3. Select Walk Away Auto Lock.
4. Select On.
5. Select BACK to exit the menus.
*if equipped
u
v
w
Models with Display Audio
VEHICLE CONTROLS
Door Operation
Use several methods to lock or unlock the doors.
Using the Lock Tab
To unlock: Pull the lock tab rearward. When you
unlock the door using the lock tab on the driver’s
door, only the driver’s door unlocks.
To lock: Push the lock tab forward. When you lock
the door using the lock tab on the driver’s door, all
other doors and the tailgate lock.
Using the Front Door Inner Handle
When you pull either front door inner handle, the
door unlocks and opens.
Unlocking and opening the driver’s door from the
inner handle unlocks all the other doors.
Using the Master Door Lock Switch
To unlock: Press the unlock side of the switch to
unlock all doors and the tailgate.
To lock: Press the lock side of the switch to lock all
doors and the tailgate.
You can use the master door lock switch to customize the door lock and
unlock settings. See the Owner’s Manual at owners.honda.com for
instructions.
Childproof Door Locks
The childproof door locks prevent the rear doors
from being opened from the inside, regardless of the
position of the lock tab.
Slide the lever in the rear door to the lock position
and close the door.
Open the door using the outer door handle.
Lock tab
To lock
To unlock
Inner handle
To lock
To unlock
Master door
lock switch
Lock
Unlock
VEHICLE CONTROLS
Tailgate Operation
Use these methods to operate the tailgate.
Opening the Tailgate
Models without smart entry system
Pull up the tailgate outer handle and lift up the
tailgate to open it.
Models with smart entry system
Press the tailgate release button and lift up the
tailgate to open it.
Closing the Tailgate
Grab the inner handle and pull the tailgate down.
Push it closed from the outside.
Tailgate
release
button
Tailgate
outer
handle
Inner handle
