Now, you can directly monitor your SmartCam camera with
your mobile device using the SmartCam app.
Download the application from Play Store and install on
your mobile device.
Search keywords for the application: "Samsung SmartCam",
"Smartcam", "Techwin".
Android
SmartCam
English
Hardware / Operating System Requirements
OS
- Android 4.1.x, 5.x, 6.x
CPU
- 1GHz or higher
RAM
- 128MB or more (recommended),
RAM : 50MB (Minimum)
Network
- Must support Wi-Fi or 3G/LTE mobile
communication
Video Codec
- H.264
Recommended mobile devices
- Galaxy S5/S6/Note 4
Recommended Tablet PC
- Galaxy Note 10.1
J
If you use 3G or 4G(LTE) data communication, excessive amount of
fees can be billed and may cause data delays or loss. Wi-Fi is
recommended.
Some functions may not work properly depending on the
manufacturer of the mobile terminal.
1. Run the downloaded application.
2. Tap <Create new account>.
1. Requirements for mobile devices
2. Subscription
|Enter User ID.
Enter Password.
Login
Remember me Auto Login
Forgot your ID?
Forgot your password?
Create new account
3. Tap <Start>.
4. Enter requested information.
M
Email address is used to search for
account ID or password.
5. Read the terms and conditions,
and tap <Register>.
6. Tap <Next> when the menu on
the completion of a new member
registration pops up.
M
Tap <Add Camera> after logging
in if you are already a member.
.
) [email protected]
.
) [email protected]
m
Account created. Tap <Next> to
setup the camera.
Cancel Next
Welcome to
Start
Setup using 3 simple steps below.
Step 1. Sign up for an account
Step 2. Register your camera
Step 3. Configure your camera
Create new account
ID
Create user ID between 8-14 characters using
letters and/or with numbers
Password
Create password between 10-14 characters using
both letters and numbers. Example: samsung135
Name
e-Mail
I agree to the Hanwha Techwin's terms and conditions.
Terms of Services
Privacy Policy
Register
User ID
Password
Confirm Password
Enter your name.
Enter the user E-mail.
Camera Setup About
Add Camera
Wi-Fi Direct connection
M
If a model is not available for the network cable, a wireless
connection is only available.
Press the button, "Tap here to add registered camera" when you
register a camera being used in another account, in order to register
it immediately without setting it.
7. Tap <Wireless Setup>.
8. Tap <Next> after connecting
a camera according to the
instructions displayed on the
screen.
DCIN 5V
DCIN 5V
Next
Registration
1
Plug in the power adapter
and connect it to the
camera. Camera can take
up to 2 minutes to boot up.
2
When the camera LED flashes in
red, press the WiFi button on the
back of the camera for 5 seconds.
3
The status LED on the camera
will change to light yellow/green.
Tap <Next>
If a model is not available for the network cable, a
wireless connection is only available.
Tap here to add registered camera
Wireless Setup
Optional Setup
9. After selecting a camera to
connect, tap <Next>.
M
Select a camera that has the last
four digits of the serial number on
the back of the product.
10. Select a WiFi router connected to
your camera.
• : After entering the
password, connect to a WiFi
router.
•
: Without the password, you
will not be connected to a WiFi
router.
• Other WiFi Networks : Enter the
SSID name, security type and
password.
If selected, it shows guide
on SSID and networking
procedures.
• Network password :
If you select a WiFi router with
the password, then the pop up
window will prompt you to enter
the password.
Registration
Other WiFi Networks
Select the WiFi network you
want the camera to connect to.
Apple Network 8dfdc7
design
Cisco_WPS_57090
KT12580
NETGEAR27
Registration
The camera(s) will be listed below.
Select the camera you wish to add and
tap <Next>.
If a camera doesn't connect, please
check '?'.
Next
Registration
WIFI ( )
Select the WiFi network you
want the camera to connect to.
Apple Network 8dfdc7
design
Cisco_WPS_57090
KT12580
NETGEAR27
Registratio
n
S
elect the WiFi network you
w
a
nt th
e
ca
m
e
r
a
t
o
co
nn
ec
t t
o.
A
p
Cisco_WPS_57090
KT
1
2580
N
ETGEAR2
7
p
l
e
N
etwor
k
8dfd
c
7
sign
q
1
w
2
e
3
r
4
t
5
y
6
u
7
i
8
o
9
p
0
a s d f g h j k l
z x c v b n
m
123
Sym
···
?
English(US)
.
···
Done
Cancel
O
K
Network password
Enter WiFi network password
11. The LED of the camera will
turn into green if a camera is
connected to Wi-Fi.
M
Camera's LED will blink in blue
while searching for a WiFi router.
If a connection is made to the WiFi
router, the LED will be blue
consistently. After a short while,
while the camera is connecting to
the server, the LED will turn green.
12. Enter <Camera Name> and
<Camera password> and then
click <OK>.
M
Click <Show Password> to check
your password.
13. The camera registration is
completed.
Select <Yes> for a camera
setting.
Select <No> to view a live
screen.
M
If you failed to register wirelessly,
please try again over a wireline.
Cameras may not be registered
depending on the settings of the
mobile device.
In this case, contact the service
center.
00 : 02
Wait until the camera LED changes from
blue to green.
This should take about 3 minutes.
Registration
R
e
g
istratio
n
00
:
0
2
Wait until the camera LED changes from
blue to
g
reen.
T
his should take about 3 minutes
.
OKCancel
Camera Name
Camera password
Show Password
Example: Living Room
Use 1 - 8 numbers and/or letters
Confirm password
Create camera name and camera password.
No Yes
Camera registered successfully.
The camera settings can now be
set to your preferences.
Continue with the camera
setup?
00 : 02
Wait until the camera LED changes from
blue to green.
This should take about 3 minutes.
Registration
Cable connection
7. Tap <Optional Setup>.
8. Select a camera model to
connect.
9
-1
.
For the SNH-V6430BN, connect
the camera by following the
instructions shown on screen 9
-1
.
DATA &
POWER
OUT
DATA
IN
NextPrev
Registration
1
Connect the camera with the adapter (DATA & POWER OUT) using a
LAN cable.
2
Connect the router with the power adapter (DATA IN) using a separate
LAN cable.
3
Tap <Next> when the camera LED
changes to green.
Tap here to add registered camera
Wireless Setup
Optional Setup
Tap here to add registered camera
Wireless
S
etup
Op
tional
S
etu
p
Please check the camera model.
SNH-V6430BN
Other models
If a model is not available for the network cable, a
wireless connection is only available.
Tap here to add registered camera
Wireless Setup
Optional Setup
9
-2
. For other models, connect
the camera by following the
instructions shown on screen 9
-2
,
and tap <Next>.
10. Select the camera found and tap
<Next>.
M
When your smartphone is
connected to the same Wi-Fi
network as the camera, it will
automatically search for the
camera.
Cameras already registered are not
searched.
DCIN 5V
DCIN 5V
NextPrev
Registration
1
Plug in the power adapter
and connect it to the camera.
Camera can take up to 2
minutes to boot up.
2
Connect the camera to the WiFi
router using network cable.
(If your camera does not have a network
port, please use the wireless option.)
3
Tap <Next> when the camera LED
changes to green.
(For *SNH-1010N, the power LED
turns to white)
|Enter the 15-digit serial number.
Prev Next
Serial number
Found camera(s).
Select the camera listed below and tap <Next>. If the
cameras are not listed, enter the camera serial
number manually.
Registration
C8BG6V2C801011T
C8AT6V2C400079A
KHNL6V2D70002KN
SMART6411ADT003
ABCD6V2H60000XJ
11. If the camera is not detected,
please enter the camera serial
number manually.
M
For camera's serial number
location, refer to [ ].
12. Enter <Camera Name> and
<Camera password> and then
click <OK>.
M
Click <Show Password> to check
your password.
13. The camera registration is
completed.
Select <Yes> for a camera
setting.
Select <No> to view a live
screen.
M
Cameras may not be registered
depending on the settings of the
mobile device.
In this case, contact the service
center.
|Enter the 15-digit serial number.
Prev Next
Serial number
No camera(s) found.
Check the serial number on the back of the camera
and enter it below.
Registration
q
1
w
2
e
3
r
4
t
5
y
6
u
7
i
8
o
9
p
0
a s d f g h j k l
z x c v b n
m
123
Sym
···
?
English(US)
.
···
Done
|Enter the 15-digit serial number.
Prev Next
Serial number
Found camera(s).
Select the camera listed below and tap <Next>. If the
cameras are not listed, enter the camera serial
number manually.
Registration
C8BG6V2C801011T
C8AT6V2C400079A
KHNL6V2D70002KN
SMART6411ADT003
|
Enter the 15-digit serial number.
P
rev
N
ex
t
S
erial numbe
r
Found camera
(
s
)
.
S
elect the camera listed below and ta
p
<Next>. If th
e
cameras are not listed, enter the camera seria
l
number manually.
R
eg
i
strat
i
o
n
S
MART6411ADT003
K
HNL
6
V2D7
000
2KN
C
8B
G
6V2
C
801011T
C
8AT6V2
C
400079A
OKCancel
Camera Name
Camera password
Show Password
Example: Living Room
Use 1 - 8 numbers and/or letters
Confirm password
Create camera name and camera password.
No Yes
Camera registered successfully.
The camera settings can now be
set to your preferences.
Continue with the camera
setup?
Camera Move
1. Move to the <Camera> item.
From the listed active cameras,
tap the desired camera's [
] on
the right.
M
You cannot monitor an inactive
camera.
For a Wi-Fi Direct camera, you can
set the wireless network by
selecting an inactive camera.
2. Live, Event, Playback and Setup
icons will be displayed.
J
The supported functions may be
different depending on the model.
Delete Camera
1. To delete an added camera, tap
and hold the desired one from the
camera list, and tap <Delete>.
3. Camera List
test
test
Live Event Playback Setup
TEST
TEST2
Camera Setup About
Add Camera
test
Camera Setup About
Add Camera
test
Camera
Setup
Ab
out
Add
C
amera
DeleteCancel
Are you sure you want to remove this
camera?
1. Tap the desired camera's [ ]
or tap the <Live> icon.
M
If there is the latest version of
firmware, when you make a live
video connection, a pop up will
appear so that you can update your
camera's firmware.
2. Enter the <Camera password>
for the camera selected. This is
the same camera password you
created at the time you registered
the camera.
Check the <Save> option to save
the camera password.
Within 20 seconds, it will start
streaming.
M
According to the network service provider's policy, or the network
connection status, it may take a while to load.
4. Live Video
test
test
Camera password
|Enter the camera password.
Save
Cancel OK
q
1
w
2
e
3
r
4
t
5
y
6
u
7
i
8
o
9
p
0
a s d f g h j k l
z x c v b n
m
123
Sym
···
?
English(US)
.
···
test
Live Event Playback Setup
TEST
TEST2
Camera Setup About
Add Camera
Live Video
No. Description
Phone
recording
The user can save the video in <Manage saved video
clips.> in Settings.
b
SD Save
A user can manually save the video in the SD card.
If the Overwrite SD Card option is disabled, it is
impossible to record if the remaining free space is less
than 10% of the total storage.
c
Capture You can capture and save a still image from the video.
Two-way
Audio
The microphone for two-way audio between cameras
and mobile devices is activated.
Refer to the bidirectional audio function.
Select a
profile
Shows the profile of the currently connected video. Tap
if you want to switch to a different profile.
For a video, you can select low/mid/high model
profiles.
For more information about the resolution of each
profile, frame rate and recommended bandwidth,
please refer to the user manual.
High definition video may not be available depending on
the wireless network speed, mobile terminal
performance and/or your Internet service provider's
policy. In this case, the video is displayed in relay mode.
For more information, please refer to "Relay Mode".
Melody
The selected melody will be heard through the camera
speaker.
Brightness
control
Adjusts the screen brightness.
Flip control Flips the video image.
test
b c
test
No. Description
Motion zone
It detects motion within the area set by the user.
Refer to the motion zone functions.
Audio playing
A user can record audio and play the recorded audio
through the camera speaker.
You can record a max of 10 audio files.
IR Lighting
If you select <Night Vision> in general settings, IR
lighting will operate for two minutes.
J
The SNH-V6430BNH model does not support the speaker, interactive
audio function and melody functions.
The supported functions may be different depending on the model.
Two-way Audio
1. Tap on the Two-way Audio icon.
2. The Mic icon will appear.
3. Talk while pressing down the mic icon. The voice can be
heard from the speaker on the camera. After finishing
talking, press down the icon for two seconds so that the
audio information will be transmitted through the network.
4. Even if you did not activate the two-way audio function,
you can receive the audio sound of the video. In addition,
the microphone setting should be at least 1 or higher if you
want to use the two-way audio function.
J
When there are multiple users logged on to the camera, first person
who tap the Talk icon will have the control.
While the bidirectional audio is on, you need to tap the bidirectional
audio icon again to cancel the function.
In relay mode, there is no audio. For more details, refer to "Relay
Mode".
test
Motion zone
1. Tap the motion zone icon.
2. Connect to the motion zone mode.
3. After touching the video, drag it to set the area.
You can set a max of three motion zones.
4. If you want to run the motion zone in the area set, tap
<OK>.
Motion is detected only in the set area.
Motion zone function only operates if motion detection is activated.
In <Setup> - <Event>, set motion detection.
5. To delete the set area, press <Clear> and <OK>.
If you want to exit the motion zone setting mode, tap
<Cancel>.
If you delete a motion zone with the motion detection enabled, any
motion in the full area will be monitored and detected.
To control digital zooming
You can also zoom in by pinch open using two
fingers on the screen. To zoom out, pinch close
on the screen.
Touch and hold to drag the screen in any
direction to reveal the hidden part of the image
if enlarged bigger than the screen.
M
Current digital zooming level is noted next to the digital zoom box,
and digital zooming supports zooming up to x4.
Cancel Clear OK
Tap the <Setup> icon to configure a camera to be monitored.
5. Camera Setup
Relay mode
Function to view the video in a relay mode when the connection
is unstable due to poor network conditions.
When connected to relay mode, [
] mark will be displayed on
the video screen. In addition, sound and high definition image
will not be provided to ensure the stability of the connection.
J
If the router UPnP setting is not set, then a relay mode connection
can be made. Depending on the model of router used, a different
setting method is used. Refer to the user manual.
If a camera is connected to the multiple router, or the wired/wireless
network environments for camera and mobile device are unstable, a
relay mode connection can be made.
If you have trouble connection to the camera, visit "http://www.
samsungsmartcam.com", go to support page, and refer to
"Troubleshooting" on it.
Setup
test
General
Network
Time
Event
SD Card
test
test
Live Event Playback Setup
General setting
1. Tap <General>.
2. Configure the basic camera
settings.
• Camera Name : Camera name
is used to enable you to identify
the camera.
• Speaker/Mic : Adjust the
volume for the camera's built-in
mic or speaker.
M
If you set the mic to zero, there will be no
live sound and no audio event and also
there is no recording in the SD card.
• Audio REC : The voice can be
recorded or deleted by users.
• Night Vision : Set the IR lighting.
Check <Night Vision> to set
the camera to switch to the
night vision mode automatically.
M
In the case of SNH-1010N, you can
check <Night Vision> for a camera
to automatically operate the IR lighting
for two minutes depending on the
brightness of the neighboring areas.
• WDR : You can compensate for
the backlight by making a dark
area brighter, and a bright area
darker.
• LDC : Sets whether to use the
image correction distortion
function or not.
Audio List
01. Add personalized audio clip
02. Add personalized audio clip
03. Add personalized audio clip
04. Add personalized audio clip
05. Add personalized audio clip
06. Add personalized audio clip
07. Add personalized audio clip
08. Add personalized audio clip
09. Add personalized audio clip
10. Add personalized audio clip
General
Camera Name
Speaker
Mic
Audio REC
Night Vision
WDR
LDC
Display date
Save camera password
Change camera password
Image encrypting
I
ma
g
e encr
y
ptin
g
Cancel Apply
test
General
Camera Name
Speaker
Mic
Audio REC
Night Vision
WDR
LDC
Display date
Save camera password
Change camera password
Image encrypting
Cancel Apply
test
G
enera
l
C
amera Name
S
p
eake
r
M
S
C
han
g
e camera password
L
W
N
A
D
I
ma
g
e encr
yp
tin
g
gypg
C
ance
l
Apply
tes
t
S
ave camera password
Di
sp
l
ay
d
at
e
L
D
C
WDR
Ni
g
h
t
Vi
s
i
on
A
udio RE
C
M
i
c
S
D
L
W
N
A
M
ApplyCancel
Current Password
New Password
Show Password
Use 1-8 numbers and/or letters
Confirm password
• Display date : Displays the date/time on the live video.
• Save camera password : You will be connected to your
camera without having to enter the password.
• Change camera password : Change the current camera
password.
• Image encrypting : This encrypts the image transmitted.
•
status LED : You can turn on or off the LED on your camera.
• Firmware Version : You can check the current version and
the latest distributed version and even make updates.
If there is the latest version of firmware, when you make a live
video connection, a pop up will appear so that you can update
your camera's firmware.
•
Camera default : Initializes all settings of the camera, except for
network settings.
3. Tap <Apply>.
J
The supported functions may be different depending on the model.
When you initialize the camera, data stored in the mobile terminal
(voice recording/phone recording) will not be deleted.
Network setting
1. Tap the <Network>.
2. Configure the wireless network.
• WiFi : Display the list of WiFi
router that you can use.
M
If the Wi-Fi receiving sensitivity is
poor, receiving a video may not
work properly. Move the location of
the camera to adjust receiving
sensitivity.
Network
Other WiFi Networks
From the list below. Please select the WiFi
network you wish to use.
WiFi
Apple Network 8dfdc7
design
Cisco_WPS_57090
KT12580
NETGEAR27
Time setting
1. Tap <Time>.
2. Set the camera's clock.
• Time zone : Select your region.
• Daylight Saving Time : Check
this option if you live in a country
or region where DST(Daylight
Saving Time) is applied.
Event setting
1. Tap the <Event>.
2. Set your event items.
• Event alert : Sends a notice
to the website and mobile
terminal when a motion/audio is
detected.
• Motion/Audio Detection :
Specify whether to trigger the
alarm or not, and specify the
sensitivity.
The higher the sensitivity is, the
subtler motion/audio events will
be detected.
• Google account setup : Sends
a notice to a designated email
account when an event is
detected via a Google account.
• Send an alert : Sends an alert
via email when motion/audio is
detected.
Time
Time
2016-04-20 02:04:38
Time zone
Daylight Saving Time
(GMT) Greenwich Mean Time
|
Cancel Apply
Event
Event alert
Motion Detection
Sensitivity
Audio Detection
Sensitivity
Google account setup
Send an alert
When an event is detected in Google accounts,
email will be used to send an alarm.
Manage alert recipients
Picasa
Images will be uploaded to Picasa after Google
authentication process is completed.
S
end an aler
t
When an event is detected in Google accounts,
e
ma
il
w
ill
b
e use
d
to sen
d
an a
l
arm
.
Manage alert recipient
s
Cancel Apply
Event
Event alert
Motion Detection
Sensitivity
Audio Detection
Sensitivity
Google account setup
Send an alert
When an event is detected in Google accounts,
email will be used to send an alarm.
Manage alert recipients
Picasa
Images will be uploaded to Picasa after Google
authentication process is completed.
Cancel Apply
E
vent
E
vent a
l
er
t
M
S
A
S
G
Ima
g
es will be uploaded to Picasa after Goo
g
le
authentication
p
rocess is com
p
leted.
C
ancel Appl
y
Pi
cas
a
Mo
ti
o
n D
e
t
ec
ti
on
S
ensitivit
y
Audio
De
t
ec
t
ion
S
ensitivit
y
G
oogle account setu
p
Send an aler
t
When an event is detected in Google accounts,
e
ma
il
w
ill
b
e use
d
to sen
d
an a
l
arm
.
Mana
g
e alert recipient
s
M
S
A
S
G
Cancel OK
Show Password
Google e-mail
Google password
If you configure a Google account, an alert will
be sent to the email address.
Need to create a
Google account.
Move
• Manage alert recipients : Add/Delete an email address to
which an alarm will be sent.
• Picasa : Sends event images to the user's Picasa account.
• Google Drive : A 30-second video clip is uploaded
automatically to the user's Google Drive account.
3. Tap <Apply>.
J
The supported functions may be different depending on the model.
Requesting Google account authentication
You can use Picasa/Google Drive by requesting authentication.
1. Sign in with your Google account.
2. Tap <Allow>, then an access
code will be created.
3. Tap <Send authentication
code>.
Picasa/Google Drive settings are
complete.
Motion Detection
Sensitivity
Audio Detection
Sensitivity
Google account setup
Picasa
You can set the Google account to upload images to
Picasa.
Google Drive
Account setting
Authentication
requests
M
S
A
S
G
P
Y
P
G
A
M
otion Detectio
n
S
ensitivit
y
A
udio Detectio
n
S
ensitivit
y
G
oo
g
le account setu
p
P
i
casa
Y
ou can set the
G
oogle account to upload images to
Pi
casa.
G
oogle Driv
e
Account setting
Authenti
cation
M
S
A
S
G
P
Y
P
G
A
Send authentication code
c
Send aut
henticat
ion code
Authentication request
Login to your Google account to receive the
authentication code.
Sign in with your Google Account
Authentication code
Next
Email
Motion Detection
Sensitivity
Audio Detection
Sensitivity
Google account setup
Picasa
You can set the Google account to upload images to
Picasa.
Google Drive
Account setting
Authentication
requests
M
S
A
S
G
P
Y
P
G
A
Mo
t
io
n
De
t
ec
t
ion
S
ensitivit
y
Aud
i
o
D
e
t
ec
ti
on
S
ensitivit
y
G
oo
g
le account setu
p
Pi
cas
a
Y
ou can set the
G
oogle account to upload images to
P
i
casa
.
G
oo
g
le Driv
e
A
ccount sett
i
n
g
Authentication
r
eques
t
s
M
S
A
S
G
P
Y
P
G
A
Authentication request
Login to your Google account to receive the
authentication code.
Authentication code
4/RF6he608emlcKYoh
************
Send authentication code
Please copy this code, switch to your application and
paste it there:
4/RF6he608emlcKYoh
************************
[email protected]
SD card setting
J
It is applicable to a model that supports SD cards.
You need to purchase an SD card if you want to use it.
Note that inserting an SD card which has been used for other
purposes into the camera may delete the data.
Before removing the SD card, deactivate the Use SD card setting.
If not, the SD card can get damaged.
1. Tap <SD Card>.
2. Set the SD card item.
• Use SD card : Determines
whether to use an SD Card
or not.
• Recording resolution settings :
Sets the image quality of the
video to be stored on the SD
card.
• Continuous Recording : Video
is saved regardless of the event
that occurs.
• SD card Overwrite : If the SD
card capacity is insufficient,
then it will automatically start
overwriting the oldest data.
• Status : Check the remaining capacity of the SD card.
• Format : Delete all the data in the SD card.
3. Tap <Apply>.
Setup
test
General
Network
Time
Event
SD Card
SD Card
Use SD card
Recording resolution settings
Select an appropriate resolution for the network
environment to watch video seamlessly.
720p
1080p
Continuous Recording
Event recording ON
If the motion detection or audio detection option
in event setting is activated, it will automatically
save the video when an event occurs.
Removing the SD card
Deactivate the SD card. If not, the SD card can be
damaged.
SD card Overwrite
Cancel Apply
1. Tap the <Event> icon.
Displays an event when a motion/
audio is detected.
M
Displayed when <Event alert> is
selected in the event settings.
M
You will get a notification prompt
when event is detected by the
camera.
6. Event List
test
test
Live Event Playback Setup
test
test
Live Event Playback Setup
t
est
test
st
tes
est
t
t
yp
Ev
en
Live
E
Set
up
ck
S
nt Play
nt
lay
bac
EventLive
- test -
Apr-20-2016 02:05:59
Motion Detection
2. Events detected are saved on the server and are displayed
in the event list in order of their occurrence.
M
If the model does not support the SD card, you can view the video by
tapping the Google Drive icon.
The supported functions may be different depending on the model.
You can watch the video only when the Google Drive account is the
same with the one used in the camera.
Deleting All Events
1. Tap the < > icon.
2.
Tap <Delete All>.
3. Tap <Yes> to delete all events.
M
When you delete all events, events
stored on the SD card will not be
deleted.
Event
15:14:25~15:14:32
15:14:30
15:06:56~15:07:04
15:07:01
14:51:37~14:51:54
14:51:52
14:51:42
04.08
04.06
04.02
03.30
Audio
Detection icon
Motion Detection
Icon
SD card event icon:
Tap the SD card event icon
to play video.
Download Recorded Video
icon : Tap the Download
Recorded Video icon to
download the selected
video.
Event
15:14:25~15:14:32
15:14:30
15:06:56~15:07:04
15:07:01
14:51:37~14:51:54
14:51:52
14:51:42
04.08
04.06
04.02
03.30
Delete a Selected Event
1. Tap the < > icon.
2. Tap <Delect selection>.
3. Select an event to delete and tap
the < > icon.
4. Tap <Yes> to delete the event.
Deleting Each Event
1. Tap and hold the desired event to
be deleted.
2.
Tap on <Yes> to delete the event.
Event
15:14:25~15:14:32
15:14:30
15:06:56~15:07:04
15:07:01
14:51:37~14:51:54
14:51:52
14:51:42
04.08
04.06
04.02
03.30
Event
15:14:25~15:14:32
15:14:30
15:06:56~15:07:04
15:07:01
14:51:37~14:51:54
14:51:52
14:51:42
04.08
04.06
04.02
03.30
Phone Recording
1. Tap the < > icon.
2. The list of manually recorded
videos saved in the SmartCam
app is displayed.
3. Tap the video you want to play,
and then the video that has been
selected will be played.
• / : You can play or pause
the video.
•
: Drag the time bar and play the video at the
desired time.
4.
You can save recorded videos in the SmartCam folder of the
mobile terminal by tapping the < > icon.
M
If you download a file, you can play the video on a video player. But, if
the video player has no codec installed to support the video, the
video won't be played smoothly so please install the codec that
supports H.264 and G.711 first.
7. Playback
test
00:05 00:30
test
test
Live Event Playback Setup
Playback
test
2016.04.08 15:24:45
test
2016.04.06 16:10:54
test
2016.04.06 15:57:01
test
2016.04.06 15:16:47
test
2016.04.06 15:16:32
test
2016.04.06 15:11:43
test
2016.04.06 15:11:32
test
2016.04.06 15:11:03
test
2016.04.06 15:10:02
SD Save
J
Continuous recording automatically saves video to SD memory every
five minutes.
You can manually record the live screen using the Save to SD button.
If you switch to another screen without turning it off, video will be
saved for additional 30 seconds before stopping.
Event recording saves motion or audio for thirty seconds and if
motion or audio is detected again in the meantime, the amount of
saving time is extended.
If a manual/event recording occurs during continuous recording, the
manual/event recording video may be split into 5-minute segments.
SD Playback
1. Tap the < > icon.
J
This model supports SD cards.
2. Searchable dates are displayed
on the calendar.
Tap the left/right < , >
button to select between year/
month in the top of the calendar
to move to the previous or next
month.
3. Select the desired date of search.
4. Select an event type that you
want to search.
You can select a saved video type in
the playing list.
test
test
Live Event Playback Setup
Playback
April 2016
Motion Detection
Type
Sun Mon Tue Wed Thu Fri Sat
27 28 29 30 31
12
3456789
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
5. On the screen, a circular shaped
timeline (24 hours) will be
displayed. The time zone with
the search data is classified by
colors.
6. Check the timeline and drag it
to the desired playing time
[ ] to set the video playing
start time or enter the time on
your own.
• Previous/Next video : Move to
the previous/next video to the
selected video.
7. Tap the <
►
> button.
Play the video data.
• / : You can play or pause
the video.
•
: Drag the time bar and
play the video at the desired time.
M
The camera supports a high definition recording profile.
A recorded video may not be played seamlessly depending on the
wireless network speed, mobile terminal performance and/or your
Internet service provider's policy.
It is not possible for the same recorded video to be played by 2 or
more users simultaneously.
In an environment in which the live screen is connected to the relay
mode [ ], the play function is not supported.
Playback
2016.04.08
09:04:57
►
Previous video Next video
test
08:02:04 08:07:03
Downloading a recorded video
1.
When there is a manually
recorded video/motion detection/
audio detection event, a
Download Recorded Video [
]
icon will be displayed that enables
you to download it.
2. Tap [ ].
The recorded video at
the selected time will be
downloaded.
Downloading is only possible when
the mobile terminal and the camera
are connected to the same network.
3. The downloaded video is saved only on the mobile terminal.
M
This function is only supported by the SNH-V6430BN model.
It may be unavailable if the network is unstable or there is access by
multiple users.
The download will fail if downloading does not start within 10
minutes.
Playback
2016.04.08
09:04:57
Previous video Next video
1. Move to the <Setup> item.
2. Set the alarm for an event.
• Sounds/Vibrate/Non-sounds :
When an event occurs, an alarm
will be displayed as it was set.
• Alert Message Pop-up : When
an event occurs, a notification
pop up will appear.
• Screen off mode Pop-up : When
an event occurs with the screen
turned off, a notification pop up
will appear.
9. Alarm setting
1. Move to the <Setup> item.
2. If you check <Auto Login> and
run the app when it is terminated,
you will be automatically logged
in.
8. Auto Login Setup
Auto Login
Camera Setup About
Vibrate
Non-sounds
Sounds
Screen off mode Pop-up
Alert Message Pop-up
Setting Alert
Video Profile
Auto setup the camera's video to low, medium or high
mode. The video may not work properly, depending on
the wireless network speed, the device's performance
or the policies of the internet service provider. It is
recommended to set up a profile that enables seamless
video.
Low Resolution
Medium Resolution
High Resolution
Manage saved video clips.
Auto Login
Camera Setup About
Vibrate
Non-sounds
Sounds
Screen off mode Pop-up
Alert Message Pop-up
Setting Alert
Video Profile
Auto setup the camera's video to low, medium or high
mode. The video may not work properly, depending on
the wireless network speed, the device's performance
or the policies of the internet service provider. It is
recommended to set up a profile that enables seamless
video.
Low Resolution
Medium Resolution
High Resolution
Manage saved video clips.
Move to the <Setup> item.
Select a video profile
Auto setup the camera's video to low, medium or high mode.
The video may not work properly, depending on the wireless
network speed, the device's performance or the policies of the
internet service provider. It is recommended to set up a profile
that enables seamless video.
Manage saved video clips.
You can download files saved in the
SmartCam app to a mobile terminal
or delete them.
10. Other Settings
Manage saved video clips.
test
2016.04.08 15:24:45
test
2016.04.06 16:10:54
test
2016.04.06 15:57:01
test
2016.04.06 15:16:47
test
2016.04.06 15:16:32
test
2016.04.06 15:11:43
test
2016.04.06 15:11:32
test
2016.04.06 15:11:03
test
2016.04.06 15:10:02
Checking the S/W info
1. Move to the <About> item.
2. You can check the information of
the currently installed software.
User Manual
1. Move to the <About> item.
2. Tap <User Manual> and a user
manual is provided.
Help
1. Move to the <About> item.
2. Tap <Help> to refer to Q&A about SmartCam.
Notice
1. Move to the <About> item.
2. Tap <Notice> and you can check notices related to the
SmartCam.
11. Info.
Version
v2.80
Created Date
2016. 07. 29
Copyright
Hanwha Techwin
This software uses FFmpeg under LGPL v2.1
User Manual
Help
Notice
Camera Setup About